Efficient oligo nucleotide mediated CRISPR-Cas9 gene editing in Aspergilli

Deletion of the polyketide synthase-encoding gene pks1 prevents melanization in the extremophilic fungus Cryomyces antarcticus

Cryomyces antarcticus, a melanized cryptoendolithic fungus endemic to Antarctica, can tolerate environmental conditions as severe as those in space. Particularly, its ability to withstand ionizing radiation has been attributed to the presence of thick and highly melanized cell walls, which-according to a previous investigation-may contain both 1,8-dihydroxynaphthalene (DHN) and L-3,4 dihydroxyphenylalanine (L-DOPA) melanin. The genes putatively involved in the synthesis of DHN melanin were identified in the genome of C. antarcticus. Most important is capks1 encoding a non-reducing polyketide synthase (PKS) and being the ortholog of the functionally characterized kppks1 from the rock-inhabiting fungus Knufia petricola. The co-expression of CaPKS1 or KpPKS1 with a 4'-phosphopantetheinyl transferase in Saccharomyces cerevisiae resulted in the formation of a yellowish pigment, suggesting that CaPKS1 is the enzyme providing the precursor for DHN melanin. To dissect the composition and function of the melanin layer in the outer cell wall of C. antarcticus, non-melanized mutants were generated by CRISPR/Cas9-mediated genome editing. Notwithstanding its slow growth (up to months), three independent non-melanized Δcapks1 mutants were obtained. The mutants exhibited growth similar to the wild type and a light pinkish pigmentation, which is presumably due to carotenoids. Interestingly, visible light had an adverse effect on growth of both melanized wild-type and non-melanized Δcapks1 strains. Further evidence that light can pass the melanized cell walls derives from a mutant expressing a H2B-GFP fusion protein, which can be detected by fluorescence microscopy. In conclusion, the study reports on the first genetic manipulation of C. antarcticus, resulting in non-melanized mutants and demonstrating that the melanin is rather of the DHN type. These mutants will allow to elucidate the relevance of melanization for surviving extreme conditions found in the natural habitat as well as in space.

Double knockout of two target genes via genome co-editing using a nitrate transporter gene nrtA and a putative thiamine transporter gene thiI as selectable markers in Aspergillus oryzae

Genome co-editing technology is effective in breeding filamentous fungi for applications in the fermentation industry, achieving site-directed mutagenesis, the status of non-genetically modified organisms (non-GMOs), and wild-type-like growth phenotype. Prior to this study, thiI gene was found as a selectable marker for such genome co-editing in the filamentous fungus Aspergillus oryzae, while it cannot be reused via marker recycling. Therefore, we aimed to identify another marker gene to knock out another target gene via genome co-editing in A. oryzae. In this study, we focused on the membrane transporter gene nrtA (AO090012000623), which promotes uptake of nitrate (NO3-). It is known that, in nrtA knockout strain, chlorate (ClO3-), an analog of nitrate with antifungal activity, cannot be imported into the cytosol, which enables the mutant to grow in the presence of chlorate. Based on this information, knockout of the target gene wA was attempted using both nrtA- and wA-specific single-guide RNAs via genome co-editing with KClO3 supplementation in A. oryzae laboratory strain RIB40 and industrial strain KBN616. Resultantly, wA knockout mutant was generated, and nrtA was identified as a selectable marker. Moreover, this genome co-editing system using nrtA was compatible with that using thiI, and thus, a double knockout mutant of two target genes wA and yA was constructed in RIB40 while maintaining non-GMO status and wild-type-like growth. As nrtA homologs have been found in several industrial Aspergillus species, genome co-editing using homolog genes as selectable markers is plausible, which would contribute to the widespread breeding of industrial strains of Aspergilli.

Sirtuin E deacetylase is required for full virulence of Aspergillus fumigatus

Aspergillus fumigatus represents a public health problem due to the high mortality rate in immunosuppressed patients and the emergence of antifungal-resistant isolates. Protein acetylation is a crucial post-translational modification that controls gene expression and biological processes. The strategic manipulation of enzymes involved in protein acetylation has emerged as a promising therapeutic approach for addressing fungal infections. Sirtuins, NAD+-dependent lysine deacetylases, regulate protein acetylation and gene expression in eukaryotes. However, their role in the human pathogenic fungus A. fumigatus remains unclear. This study constructs six single knockout strains of A. fumigatus and a strain lacking all predicted sirtuins (SIRTKO). The mutant strains are viable under laboratory conditions, indicating that sirtuins are not essential genes. Phenotypic assays suggest sirtuins' involvement in cell wall integrity, secondary metabolite production, thermotolerance, and virulence. Deletion of sirE attenuates virulence in murine and Galleria mellonella infection models. The absence of SirE alters the acetylation status of proteins, including histones and non-histones, and triggers significant changes in the expression of genes associated with secondary metabolism, cell wall biosynthesis, and virulence factors. These findings encourage testing sirtuin inhibitors as potential therapeutic strategies to combat A. fumigatus infections or in combination therapy with available antifungals.

Reconstitution of the Early Stage of Chetomin Biosynthesis in Aspergillus fumigatus Leads to the Production of Epipolythiodioxopiperazines

Using CRISPR-Cas9 technology and a microhomology-mediated end-joining repair system, we substituted genes of the gliotoxin pathway in Aspergillus fumigatus with genes responsible for chetomin biosynthesis from Chaetomium cochliodes, leading to the production of three new epipolythiodioxopiperazines (ETPs). This work represents the first successful endeavor to produce ETPs in a non-native host. Additionally, the simultaneous disruption of five genes in a single transformation marks the most extensive gene knockout event in filamentous fungi to date.

Development of a CRISPR/Cpf1 system for multiplex gene editing in Aspergillus oryzae

CRISPR/Cas technology is a powerful tool for genome engineering in Aspergillus oryzae as an industrially important filamentous fungus. Previous study has reported the application of the CRISPR/Cpf1 system based on the Cpf1 (LbCpf1) from Lachnospiraceae bacterium in A. oryzae. However, multiplex gene editing have not been investigated using this system. Here, we presented a new CRISPR/Cpf1 multiplex gene editing system in A. oryzae, which contains the Cpf1 nuclease (FnCpf1) from Francisella tularensis subsp. novicida U112 and CRISPR-RNA expression cassette. The crRNA cassette consisted of direct repeats and guide sequences driven by the A. oryzae U6 promoter and U6 terminator. Using the constructed FnCpf1 gene editing system, the wA and pyrG genes were mutated successfully. Furthermore, simultaneous editing of wA and pyrG genes in A. oryzae was performed using two guide sequences targeting these gene loci in a single crRNA array. This promising CRISPR/Cpf1 genome-editing system provides a powerful tool for genetically engineering A. oryzae.

Utilization of CRISPR-Cas genome editing technology in filamentous fungi: function and advancement potentiality

Filamentous fungi play a crucial role in environmental pollution control, protein secretion, and the production of active secondary metabolites. The evolution of gene editing technology has significantly improved the study of filamentous fungi, which in the past was laborious and time-consuming. But recently, CRISPR-Cas systems, which utilize small guide RNA (sgRNA) to mediate clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated proteins (Cas), have demonstrated considerable promise in research and application for filamentous fungi. The principle, function, and classification of CRISPR-Cas, along with its application strategies and research progress in filamentous fungi, will all be covered in the review. Additionally, we will go over general matters to take into account when editing a genome with the CRISPR-Cas system, including the creation of vectors, different transformation methodologies, multiple editing approaches, CRISPR-mediated transcriptional activation (CRISPRa) or interference (CRISPRi), base editors (BEs), and Prime editors (PEs).

An efficient CRISPR/Cas9 genome editing system based on a multiple sgRNA processing platform in Trichoderma reesei for strain improvement and enzyme production

BACKGROUND

The CRISPR/Cas9 technology is being employed as a convenient tool for genetic engineering of the industrially important filamentous fungus Trichoderma reesei. However, multiplex gene editing is still constrained by the sgRNA processing capability, hindering strain improvement of T. reesei for the production of lignocellulose-degrading enzymes and recombinant proteins.

RESULTS

Here, a CRISPR/Cas9 system based on a multiple sgRNA processing platform was established for genome editing in T. reesei. The platform contains the arrayed tRNA-sgRNA architecture directed by a 5S rRNA promoter to generate multiple sgRNAs from a single transcript by the endogenous tRNA processing system. With this system, two sgRNAs targeting cre1 (encoding the carbon catabolite repressor 1) were designed and the precise deletion of cre1 was obtained, demonstrating the efficiency of sgRNAs processing in the tRNA-sgRNA architecture. Moreover, overexpression of xyr1-A824V (encoding a key activator for cellulase/xylanase expression) at the ace1 (encoding a repressor for cellulase/xylanase expression) locus was achieved by designing two sgRNAs targeting ace1 in the system, resulting in the significantly enhanced production of cellulase (up to 1- and 18-fold on the Avicel and glucose, respectively) and xylanase (up to 11- and 41-fold on the Avicel and glucose, respectively). Furthermore, heterologous expression of the glucose oxidase gene from Aspergillus niger ATCC 9029 at the cbh1 locus with the simultaneous deletion of cbh1 and cbh2 (two cellobiohydrolase coding genes) by designing four sgRNAs targeting cbh1 and cbh2 in the system was acquired, and the glucose oxidase produced by T. reesei reached 43.77 U/mL. Besides, it was found the ER-associated protein degradation (ERAD) level was decreased in the glucose oxidase-producing strain, which was likely due to the reduction of secretion pressure by deletion of the major endogenous cellulase-encoding genes.

CONCLUSIONS

The tRNA-gRNA array-based CRISPR-Cas9 editing system was successfully developed in T. reesei. This system would accelerate engineering of T. reesei for high-level production of enzymes including lignocellulose-degrading enzymes and other recombinant enzymes. Furthermore, it would expand the CRISPR toolbox for fungal genome editing and synthetic biology.

Creating large chromosomal segment deletions in Aspergillus flavus by a dual CRISPR/Cas9 system: Deletion of gene clusters for production of aflatoxin, cyclopiazonic acid, and ustiloxin B

Aspergillus flavus produces hepatocarcinogenic aflatoxin that adversely impacts human and animal health and international trade. A promising means to manage preharvest aflatoxin contamination of crops is biological control, which employs non-aflatoxigenic A. flavus isolates possessing defective aflatoxin gene clusters to outcompete field toxigenic populations. However, these isolates often produce other toxic metabolites. The CRISPR/Cas9 technology has greatly advanced genome editing and gene functional studies. Its use in deleting large chromosomal segments of filamentous fungi is rarely reported. A system of dual CRISPR/Cas9 combined with a 60-nucleotide donor DNA that allowed removal of A. flavus gene clusters involved in production of harmful specialized metabolites was established. It efficiently deleted a 102-kb segment containing both aflatoxin and cyclopiazonic acid gene clusters from toxigenic A. flavus morphotypes, L-type and S-type. It further deleted the 27-kb ustiloxin B gene cluster of a resulting L-type mutant. Overall efficiencies of deletion ranged from 66.6 % to 85.6 % and efficiencies of deletions repaired by a single copy of donor DNA ranged from 50.5 % to 72.7 %. To determine the capacity of this technique, a pigment-screening setup based on absence of aspergillic acid gene cluster was devised. Chromosomal segments of 201 kb and 301 kb were deleted with efficiencies of 57.7 % to 69.2 %, respectively. This system used natural A. flavus isolates as recipients, eliminated a forced-recycling step to produce recipients for next round deletion, and generated maker-free deletants with sequences predefined by donor DNA. The research provides a method for creating genuine atoxigenic biocontrol strains friendly for field trial release.

Recyclable CRISPR/Cas9-mediated gene disruption and deletions in Histoplasma

IMPORTANCE

Histoplasma is a primary fungal pathogen with the ability to infect otherwise healthy mammalian hosts, causing systemic and sometimes life-threatening disease. Thus far, molecular genetic manipulation of this organism has utilized RNA interference, random insertional mutagenesis, and a homologous recombination protocol that is highly variable and often inefficient. Targeted gene manipulations have been challenging due to poor rates of homologous recombination events in Histoplasma. Interrogation of the virulence strategies of this organism would be highly accelerated by a means of efficiently generating targeted mutations. We have developed a recyclable CRISPR/Cas9 system that can be used to introduce gene disruptions in Histoplasma with high efficiency, thereby allowing disruption of multiple genes.

Establishing a one-step marker-free CRISPR/Cas9 system for industrial Aspergillus niger using counter-selectable marker Ang-ace2

OBJECTIVES

To develop a one-step, marker-free CRISPR/Cas9 system for highly efficient genome editing in industrial Aspergillus niger, with a short genetic operation cycle.

RESULTS

Firstly, evaluation of different promoters for sgRNA expression revealed tRNAGly15 as the most efficient, achieving a remarkable 100% gene editing efficiency. Furthermore, a counter-selectable marker, Ang-ace2, was identified for A. niger. Subsequently, a CRISPR/Cas9 plasmid was developed, utilizing a truncated AMA1 element and the Ang-ace2 conditional expression cassette driven by a Tet-on promoter. In the presence of doxycycline, the plasmid demonstrated a 33% loss efficiency in the progeny of A. niger spores after a single generation, resulting in a shortened genetic operation cycle of 16 days for CRISPR/Cas9.

CONCLUSIONS

The one-step marker-free CRISPR/Cas9 system was successfully developed in industrial A. niger, allowing for efficient gene editing while simultaneously reducing the editing time.

Development of CRISPR/Cas9-Based Genome Editing Tools for Polyploid Yeast Cyberlindnera jadinii and Its Application in Engineering Heterologous Steroid-Producing Strains

In this study, a suite of efficient CRISPR/Cas9 tools was developed to overcome the genetic manipulation challenges posed by the polyploid genome of industrial yeast Cyberlindnera jadinii. The developed CRISPR/Cas9 system can achieve a 100% single-gene knockdown efficiency in strain NBRC0988. Moreover, the integration of a single exogenous gene into the target locus using a 50 bp homology arm achieved near-100% efficiency. The efficiency of simultaneous integration of three genes into the chromosome is strongly influenced by the length of the homology arm, with the highest integration efficiency of 62.5% obtained when selecting a homology arm of about 500 bp. By utilizing the CRISPR/Cas system, this study demonstrated the potential of C. jadinii in producing heterologous sterols. Through shake-flask fermentation, the engineered strains produced 92.1 and 81.8 mg/L of campesterol and cholesterol, respectively. Furthermore, the production levels of these two sterols were further enhanced through high-cell-density fed-batch fermentation in a 5 L bioreactor. The highest titer of campesterol reached 807 mg/L [biomass OD600 = 294, productivity of 6.73 mg/(L·h)]. The titer of cholesterol reached 1.52 g/L [biomass OD600 = 380, productivity of 9.06 mg/(L·h)], marking the first gram-scale production of steroidal compounds in C. jadinii.

Deacetylation by sirtuins is important for Aspergillus fumigatus pathogenesis and virulence

Protein acetylation is a crucial post-translational modification that controls gene expression and a variety of biological processes. Sirtuins, a prominent class of NAD + -dependent lysine deacetylases, serve as key regulators of protein acetylation and gene expression in eukaryotes. In this study, six single knockout strains of fungal pathogen Aspergillus fumigatus were constructed, in addition to a strain lacking all predicted sirtuins (SIRTKO). Phenotypic assays suggest that sirtuins are involved in cell wall integrity, secondary metabolite production, thermotolerance, and virulence. AfsirE deletion resulted in attenuation of virulence, as demonstrated in murine and Galleria infection models. The absence of AfSirE leads to altered acetylation status of proteins, including histones and non-histones, resulting in significant changes in the expression of genes associated with secondary metabolism, cell wall biosynthesis, and virulence factors. These findings encourage testing sirtuin inhibitors as potential therapeutic strategies to combat A. fumigatus infections or in combination therapy with available antifungals.

CRISPR-based tools for targeted genetic manipulation in pathogenic Sporothrix species

Sporothrix brasiliensis is an emerging fungal pathogen frequently associated with zoonotic transmission of sporotrichosis by contaminated cats. Within 25 years, the disease has spread not only throughout Brazil but now to neighboring countries in Latin America. Thermo-dimorphism, melanin, glycans, adhesins, and secreted vesicles have been associated with the ability of Sporothrix species to cause disease in the mammalian host. Although certain virulence factors have been proposed as potential determinants for sporotrichosis, the scarcity of molecular tools for performing reverse genetics in Sporothrix has significantly impeded the dissection of mechanisms underlying the disease. Here, we demonstrate that PEG-mediated protoplast transformation is a powerful method for heterologous gene expression in S. brasiliensis, S. schenckii, and S. chilensis. Combined with CRISPR/Cas9 gene editing, this transformation protocol enabled the deletion of the putative DHN-melanin synthase gene pks1, which is a proposed virulence factor of Sporothrix species. To improve in locus integration of deletion constructs, we deleted the KU80 homolog that is critical for non-homologous end-joining DNA repair. The use of Δku80 strains from S. brasiliensis enhanced homologous-directed repair during transformation resulting in increased targeted gene deletion in combination with CRISPR/Cas9. In conclusion, our CRISPR/Cas9-based transformation protocol provides an efficient tool for targeted gene manipulation in Sporothrix species. IMPORTANCE Sporotrichosis caused by Sporothrix brasiliensis is a disease that requires long periods of treatment and is rapidly spreading across Latin America. The virulence of this fungus and the surge of atypical and more severe presentations of the disease raise the need for an understanding of the molecular mechanisms underlying sporotrichosis, as well as the development of better diagnostics and antifungal therapies. By developing molecular tools for accurate genetic manipulation in Sporothrix, this study addresses the paucity of reliable and reproducible tools for stable genetic engineering of Sporothrix species, which has represented a major obstacle for studying the virulence determinants and their roles in the establishment of sporotrichosis.

The use of immunoaffinity purification approaches coupled with LC-MS/MS offers a powerful strategy to identify protein complexes in filamentous fungi

Fungi are a diverse group of organisms that can be both beneficial and harmful to mankind. They have advantages such as producing food processing enzymes and antibiotics, but they can also be pathogens and produce mycotoxins that contaminate food. Over the past two decades, there have been significant advancements in methods for studying fungal molecular biology. These advancements have led to important discoveries in fungal development, physiology, pathogenicity, biotechnology, and natural product research. Protein complexes and protein-protein interactions (PPIs) play crucial roles in fungal biology. Various methods, including yeast two-hybrid (Y2H) and bimolecular fluorescence complementation (BiFC), are used to investigate PPIs. However, affinity-based PPI methods like co-immunoprecipitation (Co-IP) are highly preferred because they represent the natural conditions of PPIs. In recent years, the integration of liquid chromatography coupled with mass spectrometry (LC-MS/MS) has been used to analyse Co-IPs, leading to the discovery of important protein complexes in filamentous fungi. In this review, we discuss the tandem affinity purification (TAP) method and single affinity purification methods such as GFP, HA, FLAG, and MYC tag purifications. These techniques are used to identify PPIs and protein complexes in filamentous fungi. Additionally, we compare the efficiency, time requirements, and material usage of Sepharose™ and magnetic-based purification systems. Overall, the advancements in fungal molecular biology techniques have provided valuable insights into the complex interactions and functions of proteins in fungi. The methods discussed in this review offer powerful tools for studying fungal biology and will contribute to further discoveries in this field.

CRISPR/Cas9 mediated gene editing of transcription factor ACE1 for enhanced cellulase production in thermophilic fungus Rasamsonia emersonii

BACKGROUND

The filamentous fungus Rasamsonia emersonii has immense potential to produce biorefinery relevant thermostable cellulase and hemicellulase enzymes using lignocellulosic biomass. Previously in our lab, a hyper-cellulase producing strain of R. emersonii was developed through classical breeding and system biology approaches. ACE1, a pivotal transcription factor in fungi, plays a crucial role in negatively regulating the expression of cellulase genes. In order to identify the role of ACE1 in cellulase production and to further improve the lignocellulolytic enzyme production in R. emersonii, CRISPR/Cas9 mediated disruption of ACE1 gene was employed.

RESULTS

A gene-edited ∆ACE1 strain (GN11) was created, that showed 21.97, 20.70 and 24.63, 9.42, 18.12%, improved endoglucanase, cellobiohydrolase (CBHI), β-glucosidase, FPase, and xylanase, activities, respectively, as compared to parental strain M36. The transcriptional profiling showed that the expression of global regulator (XlnR) and different CAZymes genes including endoglucanases, cellobiohydrolase, β-xylosidase, xylanase, β-glucosidase and lytic polysaccharide mono-oxygenases (LPMOs) were significantly enhanced, suggesting critical roles of ACE1 in negatively regulating the expression of various key genes associated with cellulase production in R. emersonii. Whereas, the disruption of ACE1 significantly down-regulated the expression of CreA repressor gene as also evidenced by 2-deoxyglucose (2-DG) resistance phenotype exhibited by edited strain GN11 as well as appreciably higher constitutive production of cellulases in the presence of glucose and mixture of glucose and disaccharide (MGDs) both in batch and flask fed batch mode of culturing. Furthermore, ∆ACE1 strains were evaluated for the hydrolysis of biorefinery relevant steam/acid pretreated unwashed rice straw slurry (Praj Industries Ltd; 15% substrate loading rate) and were found to be significantly superior when compared to the benchmark enzymes produced by parent strain M36 and Cellic Ctec3.

CONCLUSIONS

Current work uncovers the crucial role of ACE1 in regulating the expression of the various cellulase genes and carbon catabolite repression mechanism in R. emersonii. This study represents the first successful report of utilizing CRISPR/Cas9 genome editing technology to disrupt the ACE1 gene in the thermophlic fungus R. emersonii. The improved methodologies presented in this work might be applied to other commercially important fungal strains for which genetic manipulation tools are limited.

A seven-transmembrane methyltransferase catalysing N-terminal histidine methylation of lytic polysaccharide monooxygenases

Lytic polysaccharide monooxygenases (LPMOs) are oxidative enzymes that help break down lignocellulose, making them highly attractive for improving biomass utilization in industrial biotechnology. The catalytically essential N-terminal histidine (His1) of LPMOs is post-translationally modified by methylation in filamentous fungi to protect them from auto-oxidative inactivation, however, the responsible methyltransferase enzyme is unknown. Using mass-spectrometry-based quantitative proteomics in combination with systematic CRISPR/Cas9 knockout screening in Aspergillus nidulans, we identify the N-terminal histidine methyltransferase (NHMT) encoded by the gene AN4663. Targeted proteomics confirm that NHMT was solely responsible for His1 methylation of LPMOs. NHMT is predicted to encode a unique seven-transmembrane segment anchoring a soluble methyltransferase domain. Co-localization studies show endoplasmic reticulum residence of NHMT and co-expression in the industrial production yeast Komagataella phaffii with LPMOs results in His1 methylation of the LPMOs. This demonstrates the biotechnological potential of recombinant production of proteins and peptides harbouring this specific post-translational modification.

Recyclable CRISPR/Cas9 mediated gene disruption and deletions in Histoplasma

Targeted gene disruption is challenging in the dimorphic fungal pathogen Histoplasma due to the low frequency of homologous recombination. Transformed DNA is either integrated ectopically into the genome or maintained extra chromosomally by de novo addition of telomeric sequences. Based on a system developed in Blastomyces, we adapted a CRISPR/Cas9 system to facilitate targeted gene disruption in Histoplasma with high efficiency. We express a codon-optimized version of Cas9 as well as guide RNAs from a single ectopic vector carrying a selectable marker. Once the desired mutation is verified, one can screen for isolates that have lost the Cas9 vector by simply removing the selective pressure. Multiple mutations can then be generated in the same strain by retransforming the Cas9 vector carrying different guides. We used this system to disrupt a number of target genes including RYP2 and SRE1 where loss-of-function mutations could be monitored visually by colony morphology or color, respectively. Interestingly, expression of two guide RNAs targeting the 5' and 3' ends of a gene allowed isolation of deletion mutants where the sequence between the guide RNAs was removed from the genome. Whole-genome sequencing showed that the frequency of off-target mutations associated with the Cas9 nuclease was negligible. Finally, we increased the frequency of gene disruption by using an endogenous Histoplasma regulatory sequence to drive guide RNA expression. These tools transform our ability to generate targeted mutations in Histoplasma.

The α-(1,3)-glucan synthase gene agsE impacts the secretome of Aspergillus niger

Aspergillus niger is widely used as a cell factory for the industrial production of enzymes. Previously, it was shown that deletion of α-1-3 glucan synthase genes results in smaller micro-colonies in liquid cultures of Aspergillus nidulans. Also, it has been shown that small wild-type Aspergillus niger micro-colonies secrete more protein than large mirco-colonies. We here assessed whether deletion of the agsC or agsE α-1-3 glucan synthase genes results in smaller A. niger micro-colonies and whether this is accompanied by a change in protein secretion. Biomass formation was not affected in the deletion strains but pH of the culture medium had changed from 5.2 in the case of the wild-type to 4.6 and 6.4 for ΔagsC and ΔagsE, respectively. The diameter of the ΔagsC micro-colonies was not affected in liquid cultures. In contrast, diameter of the ΔagsE micro-colonies was reduced from 3304 ± 338 µm to 1229 ± 113 µm. Moreover, the ΔagsE secretome was affected with 54 and 36 unique proteins with a predicted signal peptide in the culture medium of MA234.1 and the ΔagsE, respectively. Results show that these strains have complementary cellulase activity and thus may have complementary activity on plant biomass degradation. Together, α-1-3 glucan synthesis (in)directly impacts protein secretion in A. niger.

A method for generating genome edited plant lines from CRISPR-transformed Shanxin poplar plants

Due to the reason of low efficiency of mutation in CRISPR-editing, a high frequency of CRISPR transformed plant lines failing in mutation had been generated and had to be discarded. In the present study, we built a method to increase the efficiency of CRISPR-editing. We used Shanxin poplar (Populus davidiana×P. bolleana) as the study material, and CRISPR-editing system was first built to generate the CRISPR-transformed lines. The line that failed in CRISPR-editing was used for improving the efficiency of mutation, which was treated with heat (37 °C) to improve the cleaving activity of Cas9, leading to increased frequency of the cleaved DNA. Our results indicated that 87-100% of cells in CRISPR-transformed plants whose DNA had been cleaved by heat treatment, and the heat treatment plants were then cut into explants to differentiate adventitious buds. Each differentiated bud can be considered as an independent line. Twenty independent lines were randomly selected for analysis, and all of them had been mutated by CRISPR editing, displaying 4 types of mutation. Our results indicated that heat treatment combined with re-differentiation can generate CRISPR-edited plants efficiently. This method could conquer the problem of low mutation efficiency of CRISPR-editing in Shanxin poplar, and will have a wide application in plant CRISPR-editing. DATA AVAILABILITY: The genome sequence of Populus davidiana × P. bolleana had been submitted to GenBank with the BioProject Accession number of PRJNA867039 (https://www.ncbi.nlm.nih.gov/bioproject/?term=PRJNA867039).

-Improved natural food colorant production in the filamentous fungus Monascus ruber using CRISPR-based engineering

Monascus pigments have various food industry applications and are pharmacologically active. Genome sequencing-based clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) technology has been implemented to increase pigment production in Monascus. To increase pigment production in M. ruber KACC46666, the CRISPR/Cas9 system was used to introduce mutations in two negative regulator genes (MpigI and MpigI'), among other genes involved in the Monascus pigment biosynthesis pathway. Dual single-guide RNAs were constructed to inactivate MpigI and MpigI'. After CRISPR/Cas9 inactivation, yellow, orange, and red pigment expression in the resulting △MpigI16-7 strain (among several Cas9-mediated mutants studied) was 2.5-, 12.4-, and 18.5-fold, respectively, higher than that in the wild-type strain. This study provides valuable information regarding CRISPR-guided metabolic engineering for natural colorant production.

The expanding CRISPR toolbox for natural product discovery and engineering in filamentous fungi

Covering: up to May 2022Fungal genetics has transformed natural product research by enabling the elucidation of cryptic metabolites and biosynthetic steps. The enhanced capability to add, subtract, modulate, and rewrite genes via CRISPR/Cas technologies has opened up avenues for the manipulation of biosynthetic gene clusters across diverse filamentous fungi. This review discusses the innovative and diverse strategies for fungal natural product discovery and engineering made possible by CRISPR/Cas-based tools. We also provide a guide into multiple angles of CRISPR/Cas experiment design, and discuss current gaps in genetic tool development for filamentous fungi and the promising opportunities for natural product research.

CRISPR/Cas9-Mediated Multiplexed Genome Editing in Aspergillus oryzae

Aspergillus oryzae has great potential and competitive advantages to be developed as an excellent expression system, owing to its powerful protein secretion ability, complex post-translational modification, and safety characteristics. However, the low efficiency of genetic modification and gene function analysis is an urgent problem to be solved in A. oryzae and other filamentous fungal systems. Therefore, establishing efficient genetic transformation and multiplexed genome editing tools is significant for developing A. oryzae expression systems, and revealing its intrinsic mechanisms. In this study, the high-efficiency transformation of A. oryzae was achieved by optimizing the preparation conditions of protoplasts, and the random editing efficiency of the CRISPR/Cas9 system in A. oryzae for single and double genes reached 37.6% and 19.8%, respectively. With the aid of the selection marker, such as color or resistance, the editing efficiency of single and double genes can reach 100%. Based on the developed CRISPR/Cas9 genome editing method, the heterologous lipase gene (TLL) achieves precise integration at different genetic loci in one step. The efficient and accurate acquisition of positive transformants indicated that the morphological gene yA could be used as a helpful selection marker for genome editing in A. oryzae. In conclusion, the developed system improves the efficiency of transformation and multiplexed genome editing for A. oryzae. It provides a practical method for developing the A. oryzae high-efficiency expression system for heterologous proteins.

Multiplex Base-Editing Enables Combinatorial Epigenetic Regulation for Genome Mining of Fungal Natural Products

Genome mining of cryptic natural products (NPs) remains challenging, especially in filamentous fungi, owing to their complex genetic regulation. Increasing evidence indicates that several epigenetic modifications often act cooperatively to control fungal gene transcription, yet the ability to predictably manipulate multiple genes simultaneously is still largely limited. Here, we developed a multiplex base-editing (MBE) platform that significantly improves the capability and throughput of fungal genome manipulation, leading to the simultaneous inactivation of up to eight genes using a single transformation. We then employed MBE to inactivate three negative epigenetic regulators combinatorially in Aspergillus nidulans, enabling the activation of eight cryptic gene clusters compared to the wild-type strains. A group of novel NPs harboring unique cichorine and polyamine hybrid chemical scaffolds were identified, which were not reported previously. We envision that our scalable and efficient MBE platform can be readily applied in other filamentous fungi for the genome mining of novel NPs, providing a powerful approach for the exploitation of fungal chemical diversity.

A Mad7 System for Genetic Engineering of Filamentous Fungi

The introduction of CRISPR technologies has revolutionized strain engineering in filamentous fungi. However, its use in commercial applications has been hampered by concerns over intellectual property (IP) ownership, and there is a need for implementing Cas nucleases that are not limited by complex IP constraints. One promising candidate in this context is the Mad7 enzyme, and we here present a versatile Mad7-CRISPR vector-set that can be efficiently used for the genetic engineering of four different Aspergillus species: Aspergillus nidulans, A. niger, A. oryzae and A. campestris, the latter being a species that has never previously been genetically engineered. We successfully used Mad7 to introduce unspecific as well as specific template-directed mutations including gene disruptions, gene insertions and gene deletions. Moreover, we demonstrate that both single-stranded oligonucleotides and PCR fragments equipped with short and long targeting sequences can be used for efficient marker-free gene editing. Importantly, our CRISPR/Mad7 system was functional in both non-homologous end-joining (NHEJ) proficient and deficient strains. Therefore, the newly implemented CRISPR/Mad7 was efficient to promote gene deletions and integrations using different types of DNA repair in four different Aspergillus species, resulting in the expansion of CRISPR toolboxes in fungal cell factories.

A Versatile in Vivo DNA Assembly Toolbox for Fungal Strain Engineering

Efficient homologous recombination in baker's yeast allows accurate fusion of DNA fragments via short identical sequence tags in vivo. Eliminating the need for an Escherichia coli cloning step speeds up genetic engineering of this yeast and sets the stage for large high-throughput projects depending on DNA construction. With the aim of developing similar tools for filamentous fungi, we first set out to determine the genetic- and sequence-length requirements needed for efficient fusion reactions, and demonstrated that in nonhomologous end-joining deficient strains of Aspergillus nidulans, efficient fusions can be achieved by 25 bp sequence overlaps. Based on these results, we developed a novel fungal in vivo DNA assembly toolbox for simple and flexible genetic engineering of filamentous fungi. Specifically, we have used this method for construction of AMA1-based vectors, complex gene-targeting substrates for gene deletion and gene insertion, and for marker-free CRISPR based gene editing. All reactions were done via single-step transformations involving fusions of up to six different DNA fragments. Moreover, we show that it can be applied in four different species of Aspergilli. We therefore envision that in vivo DNA assembly can be advantageously used for many more purposes and will develop into a popular tool for fungal genetic engineering.

Development of Genetic Tools in Glucoamylase-Hyperproducing Industrial Aspergillus niger Strains

Simple Summary

Glucoamylase is one of the most needed industrial enzymes in the food and biofuel industries. Aspergillus niger is a commonly used cell factory for the production of commercial glucoamylase. For decades, genetic manipulation has promoted significant progress in industrial fungi for strain engineering and in obtaining deep insights into their genetic features. However, genetic engineering is more laborious in the glucoamylase-producing industrial strains A. niger N1 and O1 because their fungal features of having few conidia (N1) or of being aconidial (O1) make them difficult to perform transformation on. In this study, we targeted A. niger N1 and O1 and successfully developed high-efficiency transformation tools. We also constructed a clustered regularly interspaced short palindromic repeat (CRISPR)/Cas9 editing marker-free system using an autonomously replicating plasmid to express Cas9 protein and to guide RNA and the selectable marker. By using the genetic tools developed here, we generated nine albino deletion mutants. After three rounds of sub-culturing under nonselective conditions, the albino deletions lost the autonomously replicating plasmid. Together, the tools and optimization process above provided a good reference to manipulate the tough working industrial strain, not only for the further engineering these two glucoamylase-hyperproducing strains, but also for other industrial strains.

Abstract

The filamentous fungus Aspergillus niger is widely exploited by the fermentation industry for the production of enzymes, particularly glucoamylase. Although a variety of genetic techniques have been successfully used in wild-type A. niger, the transformation of industrially used strains with few conidia (e.g., A. niger N1) or that are even aconidial (e.g., A. niger O1) remains laborious. Herein, we developed genetic tools, including the protoplast-mediated transformation and Agrobacterium tumefaciens-mediated transformation of the A. niger strains N1 and O1 using green fluorescent protein as a reporter marker. Following the optimization of various factors for protoplast release from mycelium, the protoplast-mediated transformation efficiency reached 89.3% (25/28) for N1 and 82.1% (32/39) for O1. The A. tumefaciens-mediated transformation efficiency was 98.2% (55/56) for N1 and 43.8% (28/64) for O1. We also developed a marker-free CRISPR/Cas9 genome editing system using an AMA1-based plasmid to express the Cas9 protein and sgRNA. Out of 22 transformants, 9 albA deletion mutants were constructed in the A. niger N1 background using the protoplast-mediated transformation method and the marker-free CRISPR/Cas9 system developed here. The genome editing methods improved here will accelerate the elucidation of the mechanism of glucoamylase hyperproduction in these industrial fungi and will contribute to the use of efficient targeted mutation in other industrial strains of A. niger.

How to Completely Squeeze a Fungus-Advanced Genome Mining Tools for Novel Bioactive Substances

Fungal species have the capability of producing an overwhelming diversity of bioactive substances that can have beneficial but also detrimental effects on human health. These so-called secondary metabolites naturally serve as antimicrobial "weapon systems", signaling molecules or developmental effectors for fungi and hence are produced only under very specific environmental conditions or stages in their life cycle. However, as these complex conditions are difficult or even impossible to mimic in laboratory settings, only a small fraction of the true chemical diversity of fungi is known so far. This also implies that a large space for potentially new pharmaceuticals remains unexplored. We here present an overview on current developments in advanced methods that can be used to explore this chemical space. We focus on genetic and genomic methods, how to detect genes that harbor the blueprints for the production of these compounds (i.e., biosynthetic gene clusters, BGCs), and ways to activate these silent chromosomal regions. We provide an in-depth view of the chromatin-level regulation of BGCs and of the potential to use the CRISPR/Cas technology as an activation tool.

Transcriptional Activation of Biosynthetic Gene Clusters in Filamentous Fungi

Filamentous fungi are highly productive cell factories, many of which are industrial producers of enzymes, organic acids, and secondary metabolites. The increasing number of sequenced fungal genomes revealed a vast and unexplored biosynthetic potential in the form of transcriptionally silent secondary metabolite biosynthetic gene clusters (BGCs). Various strategies have been carried out to explore and mine this untapped source of bioactive molecules, and with the advent of synthetic biology, novel applications, and tools have been developed for filamentous fungi. Here we summarize approaches aiming for the expression of endogenous or exogenous natural product BGCs, including synthetic transcription factors, assembly of artificial transcription units, gene cluster refactoring, fungal shuttle vectors, and platform strains.

Efficient multiplex CRISPR/Cpf1 (Cas12a) genome editing system in Aspergillus aculeatus TBRC 277

CRISPR/Cas technology is a versatile tool for genome engineering in many organisms, including filamentous fungi. Cpf1 is a multi-domain protein of class 2 (type V) RNA-guided CRISPR/Cas endonuclease, and is an alternative platform with distinct features when compared to Cas9. However, application of this technology in filamentous fungi is limited. Here, we present a single CRISPR/Cpf1 plasmid system in Aspergillus aculeatus strain TBRC 277, an industrially relevant cell factory. We first evaluated the functionality of three Cpf1 orthologs from Acidaminococcus sp. BV3L6 (AsCpf1), Francisella tularensis subsp. novicida U112 (FnCpf1), and Lachnospiraceae bacterium (LbCpf1), in RNA-guided site-specific DNA cleavage at the pksP locus. FnCpf1 showed the highest editing efficiency (93%) among the three Cpf1s. It was further investigated for its ability to delete a 1.7kb and a 0.5kb from pksP and pyrG genes, respectively, using two protospacers targeting these gene loci in a single crRNA array. Lastly, simultaneous editing of three sites within TBRC 277 genome was performed using three guide sequences targeting these two genes as well as an additional gene, kusA, which resulted in combined editing efficiency of 40%. The editing of the NHEJ pathway by targeting kusA to generate a NHEJ-deficient strain of A. aculeatus TBRC 277 improved gene targeting efficiency and yielded more precise gene-editing than that of using wild-type strain. This promising genome-editing system can be used for strain improvement in industrial applications such as production of valuable bioproducts.

Deletion of AA9 Lytic Polysaccharide Monooxygenases Impacts A. nidulans Secretome and Growth on Lignocellulose

Lytic polysaccharide monooxygenases (LPMOs) are oxidative enzymes found in viruses, archaea, and bacteria as well as eukaryotes, such as fungi, algae and insects, actively contributing to the degradation of different polysaccharides. In Aspergillus nidulans, LPMOs from family AA9 (AnLPMO9s), along with an AA3 cellobiose dehydrogenase (AnCDH1), are cosecreted upon growth on crystalline cellulose and lignocellulosic substrates, indicating their role in the degradation of plant cell wall components. Functional analysis revealed that three target LPMO9s (AnLPMO9C, AnLPMO9F and AnLPMO9G) correspond to cellulose-active enzymes with distinct regioselectivity and activity on cellulose with different proportions of crystalline and amorphous regions. AnLPMO9s deletion and overexpression studies corroborate functional data. The abundantly secreted AnLPMO9F is a major component of the extracellular cellulolytic system, while AnLPMO9G was less abundant and constantly secreted, and acts preferentially on crystalline regions of cellulose, uniquely displaying activity on highly crystalline algae cellulose. Single or double deletion of AnLPMO9s resulted in about 25% reduction in fungal growth on sugarcane straw but not on Avicel, demonstrating the contribution of LPMO9s for the saprophytic fungal lifestyle relies on the degradation of complex lignocellulosic substrates. Although the deletion of AnCDH1 slightly reduced the cellulolytic activity, it did not affect fungal growth indicating the existence of alternative electron donors to LPMOs. Additionally, double or triple knockouts of these enzymes had no accumulative deleterious effect on the cellulolytic activity nor on fungal growth, regardless of the deleted gene. Overexpression of AnLPMO9s in a cellulose-induced secretome background confirmed the importance and applicability of AnLPMO9G to improve lignocellulose saccharification. IMPORTANCE Fungal lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that boost plant biomass degradation in combination with glycoside hydrolases. Secretion of LPMO9s arsenal by Aspergillus nidulans is influenced by the substrate and time of induction. These findings along with the biochemical characterization of novel fungal LPMO9s have implications on our understanding of their concerted action, allowing rational engineering of fungal strains for biotechnological applications such as plant biomass degradation. Additionally, the role of oxidative players in fungal growth on plant biomass was evaluated by deletion and overexpression experiments using a model fungal system.

Development of an Efficient C-to-T Base-Editing System and Its Application to Cellulase Transcription Factor Precise Engineering in Thermophilic Fungus Myceliophthora thermophila

Myceliophthora thermophila is a thermophilic fungus with great potential in biorefineries and biotechnology. The base editor is an upgraded version of the clustered regularly interspaced short palindromic repeats (CRISPR)-dependent genome-editing tool that introduces precise point mutations without causing DNA double-strand breaks (DSBs) and has been used in various organisms but rarely in filamentous fungi, especially thermophilic filamentous fungi. Here, for the first time, we constructed three cytosine base editors (CBEs) in M. thermophila, namely, evolved apolipoprotein B mRNA-editing enzyme catalytic subunit 1 (APOBEC1) cytosine base editor 4 max (Mtevo-BE4max), bacteriophage Mu Gam protein cytosine base editor 4 max (MtGAM-BE4max), and evolved CDA1 deaminase cytosine base editor (Mtevo-CDA1), and efficiently inactivated genes by precisely converting three codons (CAA, CAG, and CGA) into stop codons without DSB formation. The Mtevo-CDA1 editor with up to 92.6% editing efficiency is a more suitable tool for cytosine base editing in thermophilic fungi. To investigate the function of each motif of the cellulase transcription factor M. thermophila CLR-2 (MtCLR-2), we used the Mtevo-CDA1 editor. The fungal-specific motif of MtCLR-2 was found to be strongly involved in cellulase secretion, conidium formation, hyphal branching, and colony formation. Mutation of the fungus-specific motif caused significant defects in these characteristics. Thus, we developed an efficient thermophilic fungus-compatible base-editing system that could also be used for genetic engineering in other relevant filamentous fungi.

IMPORTANCE A CRISPR/Cas-based base-editing approach has been developed to introduce point mutations without inducing double-strand breaks (DSBs) and attracted substantial academic and industrial interest. Our study developed the deaminase-cytosine base-editing system to efficiently edit three target genes, amdS, cre-1, and the essential cellulase regulator gene Mtclr-2, in Myceliophthora thermophila. A variety of point mutations in the target loci of the DNA-binding domain and fungus-specific motif of M. thermophila CLR-2 (MtCLR-2) were successfully generated via our base editor Mtevo-CDA1 to elucidate its function. Here, we show that the DNA-binding domain of MtCLR-2 is important for the fungal response to cellulose conditions, while its fungus-specific motif is involved in fungal growth. These findings indicate that our base editor can be an effective tool for elucidating the functions of motifs of target genes in filamentous fungi and for metabolic engineering in the field of synthetic biology.

CRISPR/Cas9-Based Genome Editing and Its Application in Aspergillus Species

Aspergillus, a genus of filamentous fungi, is extensively distributed in nature and plays crucial roles in the decomposition of organic materials as an important environmental microorganism as well as in the traditional fermentation and food processing industries. Furthermore, due to their strong potential to secrete a large variety of hydrolytic enzymes and other natural products by manipulating gene expression and/or introducing new biosynthetic pathways, several Aspergillus species have been widely exploited as microbial cell factories. In recent years, with the development of next-generation genome sequencing technology and genetic engineering methods, the production and utilization of various homo-/heterologous-proteins and natural products in Aspergillus species have been well studied. As a newly developed genome editing technology, the clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9) system has been used to edit and modify genes in Aspergilli. So far, the CRISPR/Cas9-based approach has been widely employed to improve the efficiency of gene modification in the strain type Aspergillus nidulans and other industrially important and pathogenic Aspergillus species, including Aspergillus oryzae, Aspergillus niger, and Aspergillus fumigatus. This review highlights the current development of CRISPR/Cas9-based genome editing technology and its application in basic research and the production of recombination proteins and natural products in the Aspergillus species.

Genetic Engineering of the Rock Inhabitant Knufia petricola Provides Insight Into the Biology of Extremotolerant Black Fungi

Black microcolonial fungi (Ascomycetes from Arthonio-, Dothideo-, and Eurotiomycetes) are stress-tolerant and persistent dwellers of natural and anthropogenic extreme habitats. They exhibit slow yeast-like or meristematic growth, do not form specialized reproduction structures and accumulate the black pigment 1,8-dihydroxynaphthalene (DHN) melanin in the multilayered cell walls. To understand how black fungi live, survive, colonize mineral substrates, and interact with phototrophs genetic methods are needed to test these functions and interactions. We chose the rock inhabitant Knufia petricola of the Chaetothyriales as a model for developing methods for genetic manipulation. Here, we report on the expansion of the genetic toolkit by more efficient multiplex CRISPR/Cas9 using a plasmid-based system for expression of Cas9 and multiple sgRNAs and the implementation of the three resistance selection markers genR (geneticin/nptII), baR (glufosinate/bar), and suR (chlorimuron ethyl/sur). The targeted integration of expression constructs by replacement of essential genes for pigment synthesis allows for an additional color screening of the transformants. The black-pink screening due to the elimination of pks1 (melanin) was applied for promoter studies using GFP fluorescence as reporter. The black-white screening due to the concurrent elimination of pks1 and phs1 (carotenoids) allows to identify transformants that contain the two expression constructs for co-localization or bimolecular fluorescence complementation (BiFC) studies. The co-localization and interaction of the two K. petricola White Collar orthologs were demonstrated. Two intergenic regions (igr1, igr2) were identified in which expression constructs can be inserted without causing obvious phenotypes. Plasmids of the pNXR-XXX series and new compatible entry plasmids were used for fast and easy generation of expression constructs and are suitable for a broad implementation in other fungi. This variety of genetic tools is opening a completely new perspective for mechanistic and very detailed study of expression, functioning and regulation of the genes/proteins encoded by the genomes of black fungi.

Concomitant knockout of target and transporter genes in filamentous fungi by genome co-editing

In most countries, genetically modified microorganisms are not approved for use for fermentation in the food industry. Therefore, random mutagenesis and subsequent screening are performed to improve the productivities of valuable metabolites and enzymes as well as other specific functions in an industrial microbial strain. In addition, targeted gene knockout is performed by genetic recombination using its enzyme genes as selectable markers to maintain self-cloning status. However, random mutagenesis has a drawback as it does not guarantee improvement of the targeted function. Conversely, self-cloning is rarely used to breed an industrial microbial strain. This is probably because a self-cloning strain is similar to a genetically modified strain, as both undergo homologous recombination, although exogenous genes are not introduced. In this article, I discuss the usefulness of genome editing technology as a substitute for conventional techniques to breed filamentous fungal strains. This article particularly focusses on "genome co-editing," a genome editing technology used for knocking out two genes concomitantly, as reported in Magnaporthe grisea and Aspergillus oryzae. Especially, when genome co-editing is applied to a target gene and a membrane transporter gene that aid the entry of toxic compounds into cells, the resulting clone can be categorized as an autotrophic and non-genetically modified clone. Such a clone should easily apply to industrial fermentation without being restricted by a genetically modified status. Genome co-editing will also be used to construct mutant strains with multiple target gene knockouts by eliminating multiple membrane transporter genes. This could substantially improve the productivities of valuable metabolites and enzymes in a stepwise manner. Thus, genome co-editing is considered a potentially powerful method to knock out single or multiple target genes that can contribute to the breeding of filamentous fungal strains in the food industry.

Marker-free CRISPR-Cas9 based genetic engineering of the phytopathogenic fungus, Penicillium expansum

Filamentous fungi are prolific producers of secondary metabolites (SecMets), including compounds with antibiotic properties, like penicillin, that allows the producing fungus to combat competitors in a shared niche. However, the biological function of the majority of these small complex metabolites for the producing fungi remains unclear (Macheleidt et al., 2016). In an effort to address this lack of knowledge, we have chosen to study the microbial community of moldy apples in the hope of shedding more light on the role of SecMets for the dynamics of the microbial community. Penicillium expansum is one of the prevalent fungal species in this system, and in co-culture experiments with other apple fungal pathogens, we have observed up- and downregulation of several SecMets when compared to monocultures. However, molecular genetic dissection of the observed changes is challenging, and new methodologies for targeted genetic engineering in P. expansum are needed. In the current study, we have established a CRISPR-Cas9 dependent genetic engineering toolbox for the targeted genetic manipulation of P. expansum to allow for single-step construction of marker-free strains. The method and effect of different combinations of a Cas9-sgRNA expressing plasmids and repair template substrates in the NHEJ-proficient WT strain is tested by targeted deletion of melA, encoding a PKS responsible for pigment formation, which upon deletion resulted in white mutants. Co-transformation with a linear double-stranded DNA fragment consisting of two 2 kb homology arms flanking the PKS gene proved to be the most efficient strategy with 100% confirmed deletions by diagnostic PCR. Shorter homology arms (500-1000bp) resulted in 20-30% deletion efficiency. Furthermore, we demonstrate the application of the CRISPR-Cas9 method for targeted deletion of biosynthetic genes without a visible phenotype, insertion of a visual reporter-encoding gene (mRFP), and overexpression of biosynthetic genes. Combined, these tools will advance in enabling the deciphering of SecMet biosynthetic pathways, provide in situ insight into when and where SecMets are produced, and provide an avenue to study the role of P. expansum SecMets in shaping the microbial community development on moldy apples via marker-free targeted genetic engineering of P. expansum.

Enhancing the capability of Klebsiella pneumoniae to produce 1, 3-propanediol by overexpression and regulation through CRISPR-dCas9

Klebsiella pneumoniae is a common strain of bacterial fermentation to produce 1, 3‐propanediol (1, 3‐PDO). In general, the production of 1, 3‐PDO by wild‐type K. pneumoniae is relatively low. Therefore, a new gene manipulation of K. pneumoniae was developed to improve the production of 1, 3‐PDO by overexpressing in the reduction pathway and attenuating the by‐products in the oxidation pathway. Firstly, dhaB and/or dhaT were overexpressed in the reduction pathway. Considering the cost of IPTG, the constitutive promoter P32 was selected to express the key gene. By comparing K.P. pET28a‐P32‐dhaT with the original strain, the production of 1, 3‐PDO was increased by 19.7%, from 12.97 to 15.53 g l⁻¹ (in a 250 ml shaker flask). Secondly, three lldD and budC regulatory sites were selected in the by‐product pathway, respectively, using the CRISPR‐dCas9 system, and the optimal regulatory sites were selected following the 1, 3‐PDO production. As a result, the 1, 3‐PDO production by K.P. L1‐pRH2521 and K.P. B3‐pRH2521 reached up to 19.16 and 18.74 g l⁻¹, which was increased by 47.7% and 44.5% respectively. Overexpressing dhaT and inhibiting expression of lldD and budC were combined to further enhance the ability of K. pneumoniae to produce 1, 3‐PDO. The 1, 3‐PDO production by K.P. L1‐B3‐PRH2521‐P32‐dhaT reached 57.85 g l⁻¹ in a 7.5 l fermentation tank (with Na⁺ neutralizer), which is higher than that of the original strain. This is the first time that the 1, 3‐PDO production was improved in K. pneumoniae by overexpressing the key gene and attenuating by‐product synthesis in the CRISPR‐dCas9 system. This study reports an efficient approach to regulate the expression of genes in K. pneumoniae to increase the 1, 3‐PDO production, and such a strategy may be useful to modify other strains to produce valuable chemicals.

Recent advances in the development of Aspergillus for protein production

Aspergillus had been widely used in the industrial production of recombinant proteins. In addition to the safety and broad substrate utilization spectrum, its efficient post-translational modification and strong protein secretion capacity have significant advantages for developing an excellent protein-producing cell factory in industrial production. However, the difficulties in genetic manipulation of Aspergillus and varying expression levels of different heterologous proteins hampered its further development and application. Recently, the development of CRISPR genome editing and high-throughput screening platforms has facilitated the Aspergillus development of a wide range of modifications and applications. Meanwhile, multi-omics analysis and multiplexed genetic engineering have promoted effective knowledge mining. This paper provides a comprehensive and updated review of these advances, including high-throughput screening, genome editing, protein expression modules, and fermentation optimization. It also highlights and discusses the latest significant progress, aiming to provide a practical guide for implementing Aspergillus as an efficient protein-producing cell factory.

Biosynthesis of Calipyridone A Represents a Fungal 2-Pyridone Formation without Ring Expansion in Aspergillus californicus

A chemical investigation of the filamentous fungus Aspergillus californicus led to the isolation of a polyketide-nonribosomal peptide hybrid, calipyridone A (1). A putative biosynthetic gene cluster cpd for production of 1 was next identified by genome mining. The role of the cpd cluster in the production of 1 was confirmed by multiple gene deletion experiments in the host strain as well as by heterologous expression of the hybrid gene cpdA inAspergillus oryzae. Moreover, chemical analyses of the mutant strains allowed the biosynthesis of 1 to be elucidated. The results indicate that the generation of the 2-pyridone moiety of 1 via nucleophilic attack of the iminol nitrogen to the carbonyl carbon is different from the biosynthesis of other fungal 2-pyridone products through P450-catalyzed tetramic acid ring expansions. In addition, two biogenetic intermediates, calipyridones B and C, showed modest inhibition effects on the plaque-forming ability of SARS-CoV-2.

Xylitol production from plant biomass by Aspergillus niger through metabolic engineering

Xylitol is widely used in the food and pharmaceutical industries as a valuable commodity product. Biotechnological production of xylitol from lignocellulosic biomass by microorganisms is a promising alternative option to chemical synthesis or bioconversion from D-xylose. In this study, four metabolic mutants of Aspergillus niger were constructed and evaluated for xylitol accumulation from D-xylose and lignocellulosic biomass. All mutants had strongly increased xylitol production from pure D-xylose, beechwood xylan, wheat bran and cotton seed hulls compared to the reference strain, but not from several other feed stocks. The triple mutant ΔladAΔxdhAΔsdhA showed the best performance in xylitol production from wheat bran and cotton seed hulls. This study demonstrated the large potential of A. niger for xylitol production directly from lignocellulosic biomass by metabolic engineering.

CRISPR-Cas9 gene editing and rapid detection of gene-edited mutants using high-resolution melting in the apple scab fungus, Venturia inaequalis

Apple scab, caused by the fungal pathogen Venturia inaequalis, is the most economically important disease of apple (Malus x domestica) worldwide. To develop durable control strategies against this disease, a better understanding of the genetic mechanisms underlying the growth, reproduction, virulence and pathogenicity of V. inaequalis is required. A major bottleneck for the genetic characterization of V. inaequalis is the inability to easily delete or disrupt genes of interest using homologous recombination. Indeed, no gene deletions or disruptions in V. inaequalis have yet been published. Using the melanin biosynthesis pathway gene trihydroxynaphthalene reductase (THN) as a target for inactivation, which has previously been shown to result in a light-brown colony phenotype when transcriptionally silenced using RNA interference, we show, for the first time, that the CRISPR-Cas9 gene editing system can be successfully applied to the apple scab fungus. More specifically, using a CRISPR-Cas9 single guide RNA (sgRNA) targeted to the THN gene, delivered by a single autonomously replicating Golden Gate-compatible plasmid, we were able to identify six of 36 stable transformants with a light-brown phenotype, indicating an ∼16.7% gene inactivation efficiency. Notably, of the six THN mutants, five had an independent mutation. As part of our pipeline, we also report a high-resolution melting (HRM) curve protocol for the rapid detection of CRISPR-Cas9 gene-edited mutants of V. inaequalis. This protocol identified a single base pair deletion mutation in a sample containing only 5% mutant genomic DNA, indicating high sensitivity for mutant screening. In establishing CRISPR-Cas9 as a tool for gene editing in V. inaequalis, we have provided a strong starting point for studies aiming to decipher gene function in this fungus. The associated HRM curve protocol will enable CRISPR-Cas9 transformants to be screened for gene inactivation in a high-throughput and low-cost manner, which will be particularly powerful in cases where the CRISPR-Cas9-mediated gene inactivation efficiency is low.

CRISPR/Cas9 mediated editing of the Quorn fungus Fusarium venenatum A3/5 by transient expression of Cas9 and sgRNAs targeting endogenous marker gene PKS12

Background

Gene editing using CRISPR/Cas9 is a widely used tool for precise gene modification, modulating gene expression and introducing novel proteins, and its use has been reported in various filamentous fungi including the genus Fusarium. The aim of this study was to optimise gene editing efficiency using AMA1 replicator vectors for transient expression of CRISPR constituents in Fusarium venenatum (A3/5), used commercially in the production of mycoprotein (Quorn™).

Results

We present evidence of CRISPR/Cas9 mediated gene editing in Fusarium venenatum, by targeting the endogenous visible marker gene PKS12, which encodes a polyketide synthase responsible for the synthesis of the pigment aurofusarin. Constructs for expression of single guide RNAs (sgRNAs) were cloned into an AMA1 replicator vector incorporating a construct for constitutive expression of cas9 codon-optimised for Aspergillus niger or F. venenatum. Vectors were maintained under selection for transient expression of sgRNAs and cas9 in transformed protoplasts. 100% gene editing efficiency of protoplast-derived isolates was obtained using A. niger cas9 when sgRNA transcription was regulated by the F. venenatum 5SrRNA promoter. In comparison, expression of sgRNAs using a PgdpA-ribozyme construct was much less effective, generating mutant phenotypes in 0–40% of isolates. Viable isolates were not obtained from protoplasts transformed with an AMA1 vector expressing cas9 codon-optimised for F. venenatum.

Conclusions

Using an AMA1 replicator vector for transient expression of A. niger cas9 and sgRNAs transcribed from the native 5SrRNA promoter, we demonstrate efficient gene editing of an endogenous marker gene in F. venenatum, resulting in knockout of gene function and a visible mutant phenotype in 100% of isolates. This establishes a platform for further development of CRISPR/Cas technology in F. venenatum for use as a research tool, for understanding the controls of secondary metabolism and hyphal development and validating prototypes of strains produced using traditional methods for strain improvement.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40694-021-00121-8.

Application of CRISPR/Cas9 Tools for Genome Editing in the White-Rot Fungus Dichomitus squalens

Dichomitus squalens is an emerging reference species that can be used to investigate white-rot fungal plant biomass degradation, as it has flexible physiology to utilize different types of biomass as sources of carbon and energy. Recent comparative (post-) genomic studies on D. squalens resulted in an increasingly detailed knowledge of the genes and enzymes involved in the lignocellulose breakdown in this fungus and showed a complex transcriptional response in the presence of lignocellulose-derived compounds. To fully utilize this increasing amount of data, efficient and reliable genetic manipulation tools are needed, e.g., to characterize the function of certain proteins in vivo and facilitate the construction of strains with enhanced lignocellulolytic capabilities. However, precise genome alterations are often very difficult in wild-type basidiomycetes partially due to extremely low frequencies of homology directed recombination (HDR) and limited availability of selectable markers. To overcome these obstacles, we assessed various Cas9-single guide RNA (sgRNA) ribonucleoprotein (RNP) -based strategies for selectable homology and non-homologous end joining (NHEJ) -based gene editing in D. squalens. We also showed an induction of HDR-based genetic modifications by using single-stranded oligodeoxynucleotides (ssODNs) in a basidiomycete fungus for the first time. This paper provides directions for the application of targeted CRISPR/Cas9-based genome editing in D. squalens and other wild-type (basidiomycete) fungi.

Visualized Multigene Editing System for Aspergillus niger

The resistance markers could ensure the entry of the CRISPR/Cas9 system into Aspergillus niger cells instead of gene editing. To increase the efficiency of positive colony screening on the primary transformation plates, we designed a visualized multigene editing system (VMS) via a unique tRNA-guide RNA (gRNA) array containing the gRNAs of a pigment gene albA and target genes. Disruption of albA produces white colonies, and the sequences of the endogenous tRNAAla, tRNAPhe, tRNAArg, tRNAIle, and tRNALeu enhance gRNA release. The disruption efficiencies of multigene were analyzed in the A. niger strain AG11 using ammA, amyA, prtT, kusA, and glaA as reporters. In white colonies on the primary transformation plates, the disruption rates of one-, two-, three-, four-, and five-target genes reached 89.2, 70.91, 50, 22.41, and 4.17%, respectively. The VMS developed here provides an effective method for screening homokaryotic multigene editing strains of A. niger.

A CRISPR/Cas9 method facilitates efficient oligo-mediated gene editing in Debaryomyces hansenii

Halophilic and osmotolerant yeast Debaryomyces hansenii has a high potential for cell factory applications due to its resistance to harsh environmental factors and compatibility with a wide substrate range. However, currently available genetic techniques do not allow the full potential of D. hansenii as a cell factory to be harnessed. Moreover, most of the currently available tools rely on the use of auxotrophic markers that are not suitable in wild-type prototrophic strains. In addition, the preferred non-homologous end-joining (NHEJ) DNA damage repair mechanism poses further challenges when precise gene targeting is required. In this study, we present a novel plasmid-based CRISPRCUG/Cas9 method for easy and efficient gene editing of the prototrophic strains of D. hansenii. Our toolset design is based on a dominant marker and facilitates quick assembly of the vectors expressing Cas9 and single or multiple single-guide RNAs (sgRNAs) that provide the possibility for multiplex gene engineering even in prototrophic strains. Moreover, we have constructed NHEJ-deficient D. hansenii that enable our CRISPRCUG/Cas9 tools to support the highly efficient introduction of point mutations and single/double gene deletions. Importantly, we also demonstrate that 90-nt single-stranded DNA oligonucleotides are sufficient for direct repair of DNA breaks induced by sgRNA-Cas9, resulting in precise edits reaching 100% efficiencies. In conclusion, tools developed in this study will greatly advance basic and applied research in D. hansenii. In addition, we envision that our tools can be rapidly adapted for gene editing of other non-conventional yeast species including the ones belonging to the CUG clade.

Aspergillus niger as a Secondary Metabolite Factory

Aspergillus niger, one of the most common and important fungal species, is ubiquitous in various environments. A. niger isolates possess a large number of cryptic biosynthetic gene clusters (BGCs) and produce various biomolecules as secondary metabolites with a broad spectrum of application fields covering agriculture, food, and pharmaceutical industry. By extensive literature search, this review with a comprehensive summary on biological and chemical aspects of A. niger strains including their sources, BGCs, and secondary metabolites as well as biological properties and biosynthetic pathways is presented. Future perspectives on the discovery of more A. niger-derived functional biomolecules are also provided in this review.

Current Approaches for Advancement in Understanding the Molecular Mechanisms of Mycotoxin Biosynthesis

Filamentous fungi are able to synthesise a remarkable range of secondary metabolites, which play various key roles in the interaction between fungi and the rest of the biosphere, determining their ecological fitness. Many of them can have a beneficial activity to be exploited, as well as negative impact on human and animal health, as in the case of mycotoxins contaminating large quantities of food, feed, and agricultural products worldwide and posing serious health and economic risks. The elucidation of the molecular aspects of mycotoxin biosynthesis has been greatly sped up over the past decade due to the advent of next-generation sequencing technologies, which greatly reduced the cost of genome sequencing and related omic analyses. Here, we briefly highlight the recent progress in the use and integration of omic approaches for the study of mycotoxins biosynthesis. Particular attention has been paid to genomics and transcriptomic approaches for the identification and characterisation of biosynthetic gene clusters of mycotoxins and the understanding of the regulatory pathways activated in response to physiological and environmental factors leading to their production. The latest innovations in genome-editing technology have also provided a more powerful tool for the complete explanation of regulatory and biosynthesis pathways. Finally, we address the crucial issue of the interpretation of the combined omics data on the biology of the mycotoxigenic fungi. They are rapidly expanding and require the development of resources for more efficient integration, as well as the completeness and the availability of intertwined data for the research community.

A highly efficient identification of mutants generated by CRISPR/Cas9 using the non‑functional DsRed assisted selection in Aspergillus oryzae

The CRISPR/Cas9 system has become a great tool for target gene knock-out in filamentous fungi. It is laborious and time-consuming that identification mutants from a large number of transformants through PCR or enzyme-cut method. Here, we first developed a CRISPR/Cas9 system in Aspergillus oryzae using AMA1-based autonomously replicating plasmid and Cas9 under the control of the Aspergillus nidulans gpdA promoter. By the genome editing technique, we successfully obtained mutations within each target gene in Aspergillus oryzae. Then, we put the protospacer sequence of a target gene and its protospacer adjacent motif (PAM) behind the start codon "ATG" of DsRed, yielding the non‑functional DsRed (nDsRed) reporter gene, and the nDsRed reporter gene could be rescued after successful targeted editing. Moreover, this method was also applied by targeting the kojic acid synthesis gene kojA, and the transformants with DsRed activity were found to harbor targeted mutations in kojA. These results suggest that the nDsRed can be used as a powerful tool to facilitate the identification of mutants generated by CRISPR/Cas9 in Aspergillus oryzae.