Resistance of Listeria monocytogenes, Escherichia coli O157:H7 and Campylobacter jejuni after exposure to repetitive cycles of mild bactericidal treatments

Improving the Stability and Anti-Infective Activity of Sea Turtle AMPs Using Multiple Structural Modification Strategies

Antimicrobial peptides (AMPs) are regarded as promising candidates for combating antimicrobial resistance. Previously we identified an AMP named Cm-CATH2 from the green sea turtle, which exhibited potent antibacterial activity and attractive potential in application. However, natural AMPs including Cm-CATH2 frequently suffer from structural instability and sensitivity to physiological conditions, limiting their effectiveness. Herein, we explored various strategies to enhance the efficacy and stability of Cm-CATH2, including peptide truncation, non-natural amino acid substitutions, disulfide bond-based cyclization, and stapled peptide techniques. The results demonstrated that the truncated NCM4 significantly improved the antimicrobial capability of Cm-CATH2 while also enhancing its anti-inflammatory and antibiofilm activities with minimal cytotoxicity. Further ornithine-substituted peptide oNCM markedly enhanced the stability of NCM4 without compromising its antimicrobial efficacy. This study successfully designed a lead peptide oNCM with significant development potential, while providing valuable insights into the advantages and limitations associated with diverse strategies for enhancing the stability of AMPs.

Mild processing of seafood-A review

Recent years have shown a tremendous increase in consumer demands for healthy, natural, high-quality convenience foods, especially within the fish and seafood sector. Traditional processing technologies such as drying or extensive heating can cause deterioration of nutrients and sensory quality uncompilable with these demands. This has led to development of many novel processing technologies, which include several mild technologies. The present review highlights the potential of mild thermal, and nonthermal physical, and chemical technologies, either used alone or in combination, to obtain safe seafood products with good shelf life and preference among consumers. Moreover, applications and limitations are discussed to provide a clear view of the potential for future development and applications. Some of the reviewed technologies, or combinations thereof, have shown great potential for non-seafood products, yet data are missing for fish and seafood in general. The present paper visualizes these knowledge gaps and the potential for new technology developments in the seafood sector. Among identified gaps, the combination of mild heating (e.g., sous vide or microwave) with more novel technologies such as pulsed electric field, pulsed light, soluble gas stabilization, cold plasma, or Ohmic heat must be highlighted. However, before industrial applications are available, more research is needed.

Development of Antimicrobial Phototreatment Tolerance: Why the Methodology Matters

Due to rapidly growing antimicrobial resistance, there is an urgent need to develop alternative, non-antibiotic strategies. Recently, numerous light-based approaches, demonstrating killing efficacy regardless of microbial drug resistance, have gained wide attention and are considered some of the most promising antimicrobial modalities. These light-based therapies include five treatments for which high bactericidal activity was demonstrated using numerous in vitro and in vivo studies: antimicrobial blue light (aBL), antimicrobial photodynamic inactivation (aPDI), pulsed light (PL), cold atmospheric plasma (CAP), and ultraviolet (UV) light. Based on their multitarget activity leading to deleterious effects to numerous cell structures-i.e., cell envelopes, proteins, lipids, and genetic material-light-based treatments are considered to have a low risk for the development of tolerance and/or resistance. Nevertheless, the most recent studies indicate that repetitive sublethal phototreatment may provoke tolerance development, but there is no standard methodology for the proper evaluation of this phenomenon. The statement concerning the lack of development of resistance to these modalities seem to be justified; however, the most significant motivation for this review paper was to critically discuss existing dogma concerning the lack of tolerance development, indicating that its assessment is more complex and requires better terminology and methodology.

Critical Analysis of Pork QMRA Focusing on Slaughterhouses: Lessons from the Past and Future Trends

Foodborne microbial diseases have a significant impact on public health, leading to millions of human illnesses each year worldwide. Pork is one of the most consumed meat in Europe but may also be a major source of pathogens introduced all along the farm-to-fork chain. Several quantitative microbial risk assessment (QMRA) have been developed to assess human health risks associated with pork consumption and to evaluate the efficiency of different risk reduction strategies. The present critical analysis aims to review pork QMRA. An exhaustive search was conducted following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) methodology. It resulted in identification of a collection of 2489 papers including 42 on QMRA, after screening. Among them, a total of 29 studies focused on Salmonella spp. with clear concern on impacts at the slaughterhouse, modeling the spreading of contaminations and growth at critical stages along with potential reductions. Along with strict compliance with good hygiene practices, several potential risk mitigation pathways were highlighted for each slaughterhouse step. The slaughterhouse has a key role to play to ensure food safety of pork-based products but consideration of the whole farm-to-fork chain is necessary to enable better control of bacteria. This review provides an analysis of pork meat QMRA, to facilitate their reuse, and identify gaps to guide future research activities.

Characterization of damage on Listeria innocua surviving to pulsed light: Effect on growth, DNA and proteome

The effect of pulsed light treatment on the lag phase and the maximum specific growth rate of Listeria innocua was determined in culture media at 7 °C. Fluences of 0.175, 0.350 and 0.525 J/cm² were tested. The lag phase of the survivors increased as fluence did, showing significant differences for all the doses; an 8.7-fold increase was observed at 0.525 J/cm². Pulsed light decreased the maximum specific growth rate by 38% at the same fluence. Both parameters were also determined by time-lapse microscopy at 25 °C in survivors to 0.525 J/cm², with an increase of 13-fold of the lag phase and a 45% decrease of the maximum specific growth rate. The higher the fluence, the higher the variability of both parameters was. To characterize pulsed light damage on L. innocua, the formation of dimers on DNA was assessed, and a proteomic study was undertaken. In cells treated with 0.525 J/cm², cyclobutane pyrimidine dimers and pyrimidine (6-4) pyrimidone photoproducts were detected at 5:1 ratio. Pulsed light induced the expression of three proteins, among them the general stress protein Ctc. Furthermore, treated cells showed an up-regulation of proteins related to metabolism of nucleotides and fatty acids, as well as with translation processes, whereas flagellin and some glucose metabolism proteins were down-regulated. Differences in the proteome of the survivors could contribute to explain the mechanisms of adaptation of L. innocua after pulsed light treatment.

Pulsed Light Treatment of Different Food Types with a Special Focus on Meat: A Critical Review

Today, the increasing demand for minimally processed foods that are at the same moment nutritious, organoleptically satisfactory, and free from microbial hazards challenges the research and development to establish alternative methods to reduce the level of bacterial contamination. As one of the recent emerging nonthermal methods, pulsed light (PL) constitutes a technology for the fast, mild, and residue-free surface decontamination of food and food contact materials in the processing environment. Via high frequency, high intensity pulses of broad-spectrum light rich in the UV fraction, viable cells as well as spores are inactivated in a nonselective multi-target process that rapidly overwhelms cell functions and subsequently leads to cell death. This review provides specific information on the technology of pulsed light and its suitability for unpackaged and packaged meat and meat products as well as food contact materials like production surfaces, cutting tools, and packaging materials. The advantages, limitations, risks, and essential process criteria to work efficiently are illustrated and discussed with relation to implementation on industrial level and future aspects. Other issues addressed by this paper are the need to take care of the associated parameters such as alteration of the product and utilized packaging material to satisfy consumers and other stakeholders.

Stress-Induced Evolution of Heat Resistance and Resuscitation Speed in Escherichia coli O157:H7 ATCC 43888

The development of resistance in foodborne pathogens to food preservation techniques is an issue of increasing concern, especially in minimally processed foods where safety relies on hurdle technology. In this context, mild heat can be used in combination with so-called nonthermal processes, such as high hydrostatic pressure (HHP), at lower individual intensities to better retain the quality of the food. However, mild stresses may increase the risk of (cross-)resistance development in the surviving population, which in turn might compromise food safety. In this investigation, we examined the evolution of Escherichia coli O157:H7 strain ATCC 43888 after recurrent exposure to progressively intensifying mild heat shocks (from 54.0°C to 60.0°C in 0.5°C increments) with intermittent resuscitation and growth of survivors. As such, mutant strains were obtained after 10 cycles of selection with ca. 10⁶-fold higher heat resistance than that for the parental strain at 58.0°C, although this resistance did not extend to temperatures exceeding 60.0°C. Moreover, these mutant strains typically displayed cross-resistance against HHP shock and displayed signs of enhanced RpoS and RpoH activity. Interestingly, additional cycles of selection maintaining the intensity of the heat shock constant (58.5°C) selected for mutant strains in which resuscitation speed, rather than resistance, appeared to be increased. Therefore, it seems that resistance and resuscitation speed are rapidly evolvable traits in E. coli ATCC 43888 that can compromise food safety.

IMPORTANCE

In this investigation, we demonstrated that Escherichia coli O157:H7 ATCC 43888 rapidly acquires resistance to mild heat exposure, with this resistance yielding cross-protection to high hydrostatic pressure treatment. In addition, mutants of E. coli ATCC 43888 in which resuscitation speed, rather than resistance, appeared to be improved were selected. As such, both resistance and resuscitation speed seem to be rapidly evolvable traits that can compromise the control of foodborne pathogens in minimal processing strategies, which rely on the efficacy of combined mild preservation stresses for food safety.

Thymus Vulgaris (Red Thyme) and Caryophyllus Aromaticus (Clove) Essential Oils to Control Spoilage Microorganisms in Pork Under Modified Atmosphere

In recent years, it has been confirmed that essential oils (EOs) exert antimicrobial activity as they are able to inhibit cell growth and inactivate microbial cells. The application of biopreservation strategies by means of EOs opens up interesting perspectives in the food industry, including meat production. The paper aims to evaluate the effects of Thymus vulgaris (red thyme) and Caryophyllus aromaticus (cloves) EOs on the development of the spoilage population of fresh pork packaged under modified atmosphere (MAP). In particular, the research was focused on Brochothrix thermosphacta, a specific spoilage microorganism of fresh meat packed in anaerobic conditions or under MAP. Amongst seven EOs, those that showed the highest antimicrobial activity on 5 B. thermosphacta strains in vitro were: cloves [minimum inhibitory concentration (MIC) 0.6-2.5 mg/mL], savory (MIC 2.5-5.0 mg/mL), and red thyme (MIC 2.5 to 20 mg/mL). Red thyme and cloves EOs were selected for meat treatment, by increasing the dose at 20 and 40 mg/mL respectively, to take into account the matrix effect that can reduce EO availability. In spite of the minor efficacy observed in vitro, 40 mg/mL red thyme EO strongly limited the growth of B. thermosphacta in pork samples up to day 6 of storage [below 3.0 Log colony forming unit (CFU)/g, starting from 2.0 Log CFU/g at time 0], and exerted an antimicrobial effect also on the aerobic mesophilic count. Good results were obtained also with 20 mg/mL red thyme EO. The control of B. thermosphacta growth through EOs encourages research on alternative methods for extending the shelf life of fresh meat under MAP.

Previous Homologous and Heterologous Stress Exposure Induces Tolerance Development to Pulsed Light in Listeria monocytogenes

As one of the emerging non-thermal technologies, pulsed light (PL) facilitates rapid, mild and residue-free microbial surface decontamination of food and food contact materials. While notable progress has been made in the characterization of the inactivation potential of PL, experimental data available on the tolerance development to the same (homologous) stress or to different (heterologous) stresses commonly applied in food manufacturing (e.g., acid, heat, salt) is rather controversial. The findings of the present study clearly indicate that both the homologous tolerance development against PL as well as the heterologous tolerance development from heat to PL can be triggered in Listeria monocytogenes. Further, conducted kinetic analysis confirmed that the conventionally applied log-linear model is not well suited to describe the inactivation of L. monocytogenes, when exposed to PL. Instead, the Weibull model as well as the log-linear + tail model were identified as suitable models. Transmission electron microscopic (TEM) approaches allow suggestions on the morphological alterations in L. monocytogenes cells after being subjected to PL.

Antimicrobial activities of commercial essential oils and their components against food-borne pathogens and food spoilage bacteria

This study was undertaken to determine the in vitro antimicrobial activities of 15 commercial essential oils and their main components in order to pre-select candidates for potential application in highly perishable food preservation. The antibacterial effects against food-borne pathogenic bacteria (Listeria monocytogenes, Salmonella Typhimurium, and enterohemorrhagic Escherichia coli O157:H7) and food spoilage bacteria (Brochothrix thermosphacta and Pseudomonas fluorescens) were tested using paper disk diffusion method, followed by determination of minimum inhibitory (MIC) and bactericidal (MBC) concentrations. Most of the tested essential oils exhibited antimicrobial activity against all tested bacteria, except galangal oil. The essential oils of cinnamon, oregano, and thyme showed strong antimicrobial activities with MIC ≥ 0.125 μL/mL and MBC ≥ 0.25 μL/mL. Among tested bacteria, P. fluorescens was the most resistant to selected essential oils with MICs and MBCs of 1 μL/mL. The results suggest that the activity of the essential oils of cinnamon, oregano, thyme, and clove can be attributed to the existence mostly of cinnamaldehyde, carvacrol, thymol, and eugenol, which appear to possess similar activities against all the tested bacteria. These materials could be served as an important natural alternative to prevent bacterial growth in food products.

Tn6188 - a novel transposon in Listeria monocytogenes responsible for tolerance to benzalkonium chloride

Controlling the food-borne pathogen Listeria (L.) monocytogenes is of great importance from a food safety perspective, and thus for human health. The consequences of failures in this regard have been exemplified by recent large listeriosis outbreaks in the USA and Europe. It is thus particularly notable that tolerance to quaternary ammonium compounds such as benzalkonium chloride (BC) has been observed in many L. monocytogenes strains. However, the molecular determinants and mechanisms of BC tolerance of L. monocytogenes are still largely unknown. Here we describe Tn6188, a novel transposon in L. monocytogenes conferring tolerance to BC. Tn6188 is related to Tn554 from Staphylococcus (S.) aureus and other Tn554-like transposons such as Tn558, Tn559 and Tn5406 found in various Firmicutes. Tn6188 comprises 5117 bp, is integrated chromosomally within the radC gene and consists of three transposase genes (tnpABC) as well as genes encoding a putative transcriptional regulator and QacH, a small multidrug resistance protein family (SMR) transporter putatively associated with export of BC that shows high amino acid identity to Smr/QacC from S. aureus and to EmrE from Escherichia coli. We screened 91 L. monocytogenes strains for the presence of Tn6188 by PCR and found Tn6188 in 10 of the analyzed strains. These isolates were from food and food processing environments and predominantly from serovar 1/2a. L. monocytogenes strains harboring Tn6188 had significantly higher BC minimum inhibitory concentrations (MICs) (28.5 ± 4.7 mg/l) than strains without Tn6188 (14 ± 3.2 mg/l). Using quantitative reverse transcriptase PCR we could show a significant increase in qacH expression in the presence of BC. QacH deletion mutants were generated in two L. monocytogenes strains and growth analysis revealed that ΔqacH strains had lower BC MICs than wildtype strains. In conclusion, our results provide evidence that Tn6188 is responsible for BC tolerance in various L. monocytogenes strains.

Effect of pulsed light treatments on the growth and resistance behavior of Listeria monocytogenes 10403S, Listeria innocua, and Escherichia coli ATCC 25922 in a liquid substrate

Pulsed light (PL) treatment can effectively inactivate a large proportion of contaminating bacteria on surfaces and in clear solutions. An important issue that needs to be investigated is whether repeated exposure to PL treatment causes any changes to the growth and resistance behavior of the bacteria surviving the treatment. To test this, three challenge microorganisms were used: Listeria monocytogenes, Listeria innocua, and Escherichia coli. Cells of the challenge bacteria were treated with either low or high PL doses. Survivors of the PL treatment were enumerated, isolated, regrown, and exposed again to PL treatment. PL inactivation curves were generated for the survivors of each exposure cycle (as well as controls) to examine possible differences induced by repeated treatments. Growth curves of L. monocytogenes, L. innocua, and E. coli isolates recovered from exposure to either 1.1 or 10.1 J/cm(2) were not significantly different from the growth curves of untreated cells. Reduction levels of up to 4 and up to 6 log CFU were obtained after exposure to 1.1 and 10.1 J/cm(2), respectively, both for the controls and the repeatedly treated and recovered isolates. These results show that PL did not significantly change the growth kinetics or resistance to PL of the target microorganisms after up to 10 exposures. These findings have significance for the practical application of PL treatment, as they indicate that this technology does not select for microorganisms with increased resistance.

Antibiotic-resistant bacteria: a challenge for the food industry

Antibiotic-resistant bacteria were first described in the 1940s, but whereas new antibiotics were being discovered at a steady rate, the consequences of this phenomenon were slow to be appreciated. At present, the paucity of new antimicrobials coming into the market has led to the problem of antibiotic resistance fast escalating into a global health crisis. Although the selective pressure exerted by the use of antibiotics (particularly overuse or misuse) has been deemed the major factor in the emergence of bacterial resistance to these antimicrobials, concerns about the role of the food industry have been growing in recent years and have been raised at both national and international levels. The selective pressure exerted by the use of antibiotics (primary production) and biocides (e.g., disinfectants, food and feed preservatives, or decontaminants) is the main driving force behind the selection and spread of antimicrobial resistance throughout the food chain. Genetically modified (GM) crops with antibiotic resistance marker genes, microorganisms added intentionally to the food chain (probiotic or technological) with potentially transferable antimicrobial resistance genes, and food processing technologies used at sub-lethal doses (e.g., alternative non-thermal treatments) are also issues for concern. This paper presents the main trends in antibiotic resistance and antibiotic development in recent decades, as well as their economic and health consequences, current knowledge concerning the generation, dissemination, and mechanisms of antibacterial resistance, progress to date on the possible routes for emergence of resistance throughout the food chain and the role of foods as a vehicle for antibiotic-resistant bacteria. The main approaches to prevention and control of the development, selection, and spread of antibacterial resistance in the food industry are also addressed.

Isolation of highly heat-resistant Listeria monocytogenes variants by use of a kinetic modeling-based sampling scheme

Stable high-hydrostatic-pressure (HHP)-resistant Listeria monocytogenes LO28 variants were previously isolated and characterized. These HHP variants were also more resistant to heat. In addition, nonlinear heat inactivation kinetics pointed toward the existence of heat-resistant variants, although these could not be isolated so far. In this study, we used kinetic modeling of inactivation curves of two isolated HHP variants and their wild type, and this revealed that the probability of finding resistant variants should depend on the nature of the inactivation treatment and the time of exposure. At specific heat and HHP conditions, resistant LO28 and EGDe variants were indeed isolated. Resistant LO28 variants were even isolated after a heat inactivation at 72°C in milk, and these variants showed high resistance to standard pasteurization conditions. The increased resistance of part of the isolated LO28 and EGDe variants was due to mutations in their ctsR genes. For the variants whose ctsR genes and upstream regions were not altered, the mechanisms leading to increased resistance remain to be elucidated. This research showed the strength of kinetic modeling in unraveling the causes of nonlinear inactivation and facilitating the isolation of heat-resistant L. monocytogenes variants.

Efficacy of high-intensity pulsed light for the microbiological decontamination of chicken, associated packaging, and contact surfaces

The efficacy of high-intensity light pulse (HILP) technology (3 Hz, maximum of 505 J/pulse, and a pulse duration of 360 μs) for the decontamination of raw chicken and associated packaging and surface materials was investigated. Its ability to reduce microbial counts on raw chicken through plastic films was also examined. Complete inactivation of Campylobacter spp., Escherichia coli, and Salmonella Enteritidis in liquid was achieved after 30 sec HILP treatment. Reductions of 3.56, 4.69, and 4.60 log₁₀ cfu/cm²) were observed after 5 sec HILP treatment of Campylobacter jejuni, E. coli, and Salmonella Enteritidis inoculated onto packaging materials and contact surfaces, respectively. The greatest reductions on inoculated chicken skin were 1.22, 1.69, and 1.27 log₁₀ cfu/g for C. jejuni, E. coli, and Salmonella Enteritidis, respectively. Corresponding reductions on inoculated skinless breast meat were 0.96, 1.13, and 1.35 log₁₀ cfu/g. The effectiveness of HILP treatment for reducing microbial levels on chicken increased as the film thickness decreased. HILP treatments of 2 sec did not significantly affect the color of raw chicken although treatments of 30 sec impacted color. This study has shown HILP to be an effective method for the decontamination of packaging and surface materials. Additionally, it has demonstrated the potential of HILP to be used as a decontamination method for packaged chicken.