Modelling biofilm formation of Salmonella enterica ser. Newport as a function of pH and water activity

Biofilm formation in food industries: Challenges and control strategies for food safety

Various pathogens have the ability to grow on food matrices and instruments. This grow may reach to form biofilms. Bacterial biofilms are community of microorganisms embedded in extracellular polymeric substances (EPSs) containing lipids, DNA, proteins, and polysaccharides. These EPSs provide a tolerance and favorable living condition for microorganisms. Biofilm formations could not only contribute a risk for food safety but also have negative impacts on healthcare sector. Once biofilms form, they reveal resistances to traditional detergents and disinfectants, leading to cross-contamination. Inhibition of biofilms formation and abolition of mature biofilms is the main target for controlling of biofilm hazards in the food industry. Some novel eco-friendly technologies such as ultrasound, ultraviolet, cold plasma, magnetic nanoparticles, different chemicals additives as vitamins, D-amino acids, enzymes, antimicrobial peptides, and many other inhibitors provide a significant value on biofilm inhibition. These anti-biofilm agents represent promising tools for food industries and researchers to interfere with different phases of biofilms including adherence, quorum sensing molecules, and cell-to-cell communication. This perspective review highlights the biofilm formation mechanisms, issues associated with biofilms, environmental factors influencing bacterial biofilm development, and recent strategies employed to control biofilm-forming bacteria in the food industry. Further studies are still needed to explore the effects of biofilm regulation in food industries and exploit more regulation strategies for improving the quality and decreasing economic losses.

Comparative evaluation of the effectiveness of alcohol-based sanitizers, UV-C radiation and hot air on three-age Salmonella biofilms

Dry sanitation is recommended to control contamination and prevent microbial growth and biofilm formation in the low-moisture food manufacturing plants. The objective of this study was to evaluate the effectiveness of dry sanitation protocols on Salmonella three-age biofilms formed on stainless steel (SS) and polypropylene (PP). Biofilms were formed for 24, 48 and 96 h at 37 °C using a cocktail of six Salmonella strains (Muenster, Miami, Glostrup, Javiana, Oranienburg, Yoruba) isolated from the peanut supply chain. Then, the surfaces were exposed to UV-C radiation, hot air (90 °C), 70% ethanol and a commercial product based on isopropyl alcohol for 5, 10, 15 and 30 min. After 30min exposure, on PP the reductions ranged from 3.2 to 4.2 log CFU/cm² for UV-C, from 2.6 to 3.0 log CFU/cm² for hot air, from 1.6 to 3.2 log CFU/cm² for 70% ethanol and from 1.5 to 1.9 log CFU/cm² for the commercial product. On SS, after the same exposure time, reductions of 1.3-2.2 log CFU/cm², 2.2 to 3.3 log CFU/cm², 1.7 to 2.0 log CFU/cm² and 1.6 to 2.4 log CFU/cm² were observed for UV-C, hot air, 70% ethanol and commercial product, respectively. UV-C was the only treatment affected by the surface material (p < 0.05) whereas the biofilm age influenced the effectiveness of UV-C and hot air (p < 0.05). For most treatment, there was significant difference among the exposure times (p < 0.05). Overall, the fastest loss in the biofilm viability was noted in the first 5 min, followed by a tail phase. The time predicted by the Weibull model for the first decimal reduction ranged from 0.04 to 9.9 min on PP and from 0.7 to 8.5 min on SS. In addition, the Weibull model indicates that most of treatments (79%) required a long-term exposure time (>30 min) to achieve 3-log reductions of Salmonella biofilms. In summary, UV-C showed the best performance on PP whereas hot air was noted to be the most effective on SS.

Application of encapsulated and dry-plated food acidulants to control Salmonella enterica in raw meat-based diets for dogs

There is an increasing demand for raw meat-based diets (RMBDs) for dogs, but these foods cannot be heat-pasteurized. Thus, the objective of this study was to evaluate the antimicrobial efficacy of encapsulated and dry-plated glucono delta lactone (GDL), citric acid (CA), and lactic acid (LA) when challenged against Salmonella enterica inoculated in a model raw meat-based diet (RMBDs) for dogs. Nutritionally complete, raw diets were formulated with different levels (1.0, 2.0 and 3.0% (w/w)) of both encapsulated and dry-plated GDL, CA, and LA with both the positive (PC) and the negative controls (NC) without acidulants. The diets were formed into patties of ∼100 g and inoculated with 3-cocktail mixtures of Salmonella enterica serovars, excluding the NC to achieve a final concentration of ∼6.0 Log CFU/patty. Microbial analyses were performed on the inoculated diets and survivors of S. enterica enumerated. Both encapsulated and dry-plated CA and LA had higher log reductions compared to GDL (P < 0.05). However, encapsulated CA and LA at 1.0% (w/w) exhibited higher log reductions (P > 0.05) and preserved product quality compared to the dry-plated acidulants at 1.0%. We concluded that 1.0% (w/w) of encapsulated citric or lactic acids could be successfully applied as an antimicrobial intervention in raw diets for dogs.

Modelling the Adhesion and Biofilm Formation Boundary of Listeria monocytogenes ST9

Listeria monocytogenes is a major foodborne pathogen that can adhere to or form a biofilm on food contact surfaces, depending on the environmental conditions. The purpose of this work is to determine the adhesion and biofilm formation boundaries for L. monocytogenes ST9 under the combination environments of temperature (5, 15, and 25 °C), NaCl concentration (0%, 3%, 6%, and 9% (w/v)) and pH (5.0, 6.0, 7.0, and 8.0). The probability models of adhesion and biofilm formation were built using the logistic regression. For adhesion, only the terms of linear T and NaCl are significant for L. monocytogenes ST9 (p < 0.05), whereas the terms of linear T, NaCl, and pH, and the interaction between T and pH were significant for biofilm formation (p < 0.05). By analyzing contour maps and their surface plots for two different states, we discovered that high temperature promoted adhesion and biofilm formation, whereas excessive NaCl concentration inhibited both of them. With a stringent threshold of 0.1667, the accuracy rate for identifying both adhesion/no-adhesion and biofilm formation/no-biofilm formation events were 0.929, indicating that the probability models are reasonably accurate in predicting the adhesion and biofilm formation boundary of L. monocytogenes ST9. The boundary model may provide a useful way for determining and further controlling L. monocytogenes adhesion and biofilm formation in various food processing environments.

The Complex Mechanism of the Salmonella typhi Biofilm Formation That Facilitates Pathogenicity: A Review

Salmonella enterica serovar Typhi (S. typhi) is an intracellular pathogen belonging to the Enterobacteriaceae family, where biofilm (aggregation and colonization of cells) formation is one of their advantageous traits. Salmonella typhi is the causative agent of typhoid fever in the human body and is exceptionally host specific. It is transmitted through the fecal-oral route by consuming contaminated food or water. This subspecies is quite intelligent to evade the innate detection and immune response of the host body, leading to systemic dissemination. Consequently, during the period of illness, the gallbladder becomes a harbor and may develop antibiotic resistance. Afterwards, they start contributing to the continuous damage of epithelium cells and make the host asymptomatic and potential carriers of this pathogen for an extended period. Statistically, almost 5% of infected people with Salmonella typhi become chronic carriers and are ready to contribute to future transmission by biofilm formation. Biofilm development is already recognized to link with pathogenicity and plays a crucial role in persistency within the human body. This review seeks to discuss some of the crucial factors related to biofilm development and its mechanism of interaction causing pathogenicity. Understanding the connections between these things will open up a new avenue for finding therapeutic approaches to combat pathogenicity.

Formation of Biofilm by Tetragenococcus halophilus Benefited Stress Tolerance and Anti-biofilm Activity Against S. aureus and S. Typhimurium

Tetragenococcus halophilus, a halophilic lactic acid bacterium (LAB), plays an important role in the production of high-salt fermented foods. Generally, formation of biofilm benefits the fitness of cells when faced with competitive and increasingly hostile fermented environments. In this work, the biofilm-forming capacity of T. halophilus was investigated. The results showed that the optimal conditions for biofilm formation by T. halophilus were at 3–9% salt content, 0–6% ethanol content, pH 7.0, 30°C, and on the surface of stainless steel. Confocal laser scanning microscopy (CLSM) analysis presented a dense and flat biofilm with a thickness of about 24 μm, and higher amounts of live cells were located near the surface of biofilm and more dead cells located at the bottom. Proteins, polysaccharides, extracellular-DNA (eDNA), and humic-like substances were all proved to take part in biofilm formation. Higher basic surface charge, greater hydrophilicity, and lower intracellular lactate dehydrogenase (LDH) activities were detected in T. halophilus grown in biofilms. Atomic force microscopy (AFM) imaging revealed that biofilm cultures of T. halophilus had stronger surface adhesion forces than planktonic cells. Cells in biofilm exhibited higher cell viability under acid stress, ethanol stress, heat stress, and oxidative stress. In addition, T. halophilus biofilms exhibited aggregation activity and anti-biofilm activity against Staphylococcus aureus and Salmonella Typhimurium. Results presented in the study may contribute to enhancing stress tolerance of T. halophilus and utilize their antagonistic activities against foodborne pathogens during the production of fermented foods.

Incidence of Bacillus cereus, Bacillus sporothermodurans and Geobacillus stearothermophilus in ultra-high temperature milk and biofilm formation capacity of isolates

The presence of mesophilic and thermophilic spore-forming bacteria in UHT milk, as well as biofilm formation in dairy plants, are concerning. The current study explored the spore-forming bacilli diversity in 100 samples of UHT milk (skimmed and whole). Through this work, a total of 239 isolates from UHT milk samples were obtained. B. cereus s.s. was isolated from 7 samples, B. sporothermodurans from 19 and, G. stearothermophilus from 25 samples. Genes encoding hemolysin (HBL), and non-hemolytic (NHE) enterotoxins were detected in B. cereus s.s. isolates. All isolates of B. cereus s.s. (12) B. sporothermodurans (38), and G. stearothermophilus (47) were selected to verify the ability of biofilm formation in microtiter plates. The results showed all isolates could form biofilms. The OD₅₉₅ values of biofilm formation varied between 0.14 and 1.04 for B. cereus, 0.20 to 1.87 for B. sporothermodurans, and 0.49 to 2.77 for G. stearothermophilus. The data highlights that the dairy industry needs to reinforce control in the initial quality of the raw material and in CIP cleaning procedures; avoiding biofilm formation and consequently a persistent microbiota in processing plants, which can shelter pathogenic species such as B. cereus s.s.

Thyme Oil Enhances the Inactivation of Salmonella enterica on Raw Chicken Breast Meat During Marination in Lemon Juice With Added Yucca schidigera Extract

Enteric pathogens such as Salmonella enterica can survive in low pH conditions and pose a food safety threat during marinating of raw poultry meat. A study was conducted to investigate the effectiveness of thyme oil for killing S. enterica on raw chicken during marination in lemon juice containing yucca extract. Samples of raw chicken breast were inoculated with a five-serovar mixture of S. enterica (~10⁸ CFU/mL) and immersed for 2, 4, 6, and 8 h in four lemon-based marinades at 22°C: lemon juice alone (L), L with added 0.5% yucca extract (L + Y), L + Y and 0.5% thyme oil (L + Y + 0.5% TO) and L + Y + 1.0% TO. The L and L + Y served as controls. Survivors were determined by surface plating chicken homogenates on xylose-lysine tergitol-4 (XLT4) agar and XLT4 agar overlaid with non-selective agar (TAL) and counting bacterial colonies after 48 h of incubation (35°C). Marinades containing Y and TO significantly reduced initial viable populations of S. enterica compared to control (L and L + Y) solutions (P < 0.05). Based on S. enterica survivors on TAL medium, the L and L + Y reduced initial populations by 1.12 and 1.42 Log CFU/sample, respectively, after 8 h whereas, Log reductions caused by L + Y + 0.5% TO and L + Y + 1.0% TO, respectively, were 2.62 and 3.91 (P < 0.05). Numbers of survivors were higher on TAL compared to XLT4 agar (P < 0.05); however, the extent of sub-lethal injury caused by the marinades was not statistically significant (P > 0.05). The death rate of S. enterica increased significantly (P < 0.05) in the marinades containing TO (0.5 or 1.0%) compared to control (L + Y). Based on these results, thyme oil has good potential to increase the antimicrobial efficacy of lemon juice marinade against Salmonella on raw chicken breast and enhance the microbial safety of this popular poultry product.

Viability of Salmonella Typhimurium biofilms on major food-contact surfaces and eggshell treated during 35 days with and without water storage at room temperature

Salmonella is one of the main foodborne pathogens that affect humans and farm animals. The Salmonella genus comprises a group of food-transmitted pathogens that cause highly prevalent foodborne diseases throughout the world. The aim of this study was to appraise the viability of Salmonella Typhimurium biofilm under water treatment at room temperature on different surfaces, specifically stainless steel (SS), plastic (PLA), rubber (RB), and eggshell (ES). After 35 D, the reduction of biofilm on SS, PLA, RB, and ES was 3.35, 3.57, 3.22, and 2.55 log CFU/coupon without water treatment and 4.31, 4.49, 3.50, and 1.49 log CFU/coupon with water treatment, respectively. The d_R value (time required to reduce bacterial biofilm by 99% via Weibull modeling) of S. Typhimurium without and with water treatment was the lowest on PLA (176.86 and 112.17 h, respectively) and the highest on ES (485.37 and 2,436.52 h, respectively). The viability of the S. Typhimurium on ES and the 3 food-contact surfaces was monitored for 5 wk (35 D). The results of this study provide valuable information for the control of S. Typhimurium on different surfaces in the food industry, which could reduce the risk to consumers.

Strain variability in biofilm formation: A food safety and quality perspective

The inherent differences in microbial behavior among identically treated strains of the same microbial species, referred to as "strain variability", are regarded as an important source of variability in microbiological studies. Biofilms are defined as the structured multicellular communities with complex architecture that enable microorganisms to grow adhered to abiotic or living surfaces and constitute a fundamental aspect of microbial ecology. The research studies assessing the strain variability in biofilm formation are relatively few compared to the ones evaluating other aspects of microbial behavior such as virulence, growth and stress resistance. Among the available research data on intra-species variability in biofilm formation, compiled and discussed in the present review, most of them refer to foodborne pathogens as compared to spoilage microorganisms. Molecular and physiological aspects of biofilm formation potentially related to strain-specific responses, as well as information on the characterization and quantitative description of this type of biological variability are presented and discussed. Despite the considerable amount of available information on the strain variability in biofilm formation, there are certain data gaps and still-existing challenges that future research should cover and address. Current and future advances in systems biology and omics technologies are expected to aid significantly in the explanation of phenotypic strain variability, including biofilm formation variability, allowing for its integration in microbiological risk assessment.

An ordinal logistic regression approach to predict the variability on biofilm formation stages by five Salmonella enterica strains on polypropylene and glass surfaces as affected by pH, temperature and NaCl

This study assessed the adhesion and formation of biofilm by five Salmonella enterica strains (S. Enteritidis 132, S. Infantis 176, S. Typhimurium 177, S. Heidelberg 281 and S. Corvallis 297) on polypropylene (PP) and glass (G) surfaces as affected by pH (4-7), NaCl concentration (0-10% w/v) and temperature (8-35 °C). Sessile counts <3 log CFU/cm² were considered lack of adhesion (category 1), while counts ≥ 3 and < 5 log CFU/cm² corresponded to adhesion (category 2) and counts ≥ 5 log CFU/cm² corresponded biofilm formation (category 3). The obtained results categorized in these three responses were used to develop ordinal regression models to predict the probability of biofilm stages on PP- and G-surfaces. The experimental outcomes for lack of adhesion were >90% on PP- and G-surfaces. Generally, adhesion outcomes corresponded to approximately 36% of the total, whereas biofilm outcomes were close to 65% in both PP- and G-surfaces. The biofilm stages varied among the strains studied and with the material surface under the same experimental conditions. According to the generated ordinal models, the probability of adhesion and biofilm formation on PP-surface by the five S. enterica strains tested decreased at pH 4 or 5 in NaCl concentrations >4% and at a temperature <20 °C. On G-surface, the probability of adhesion increased pH 6 or 7, in the absence of NaCl and temperatures <20 °C, while, the probability of biofilm formation increased in the same pH, NaCl concentration up to 4% and temperatures ≥20 °C. This is the first study assessing the biofilm formation through categorical, ordinal responses and it shows that ordinal regression models can be useful to predict biofilm stages of S. enterica as a function of pH, NaCl, and temperature or their interactions.

Biofilms in Food Processing Environments: Challenges and Opportunities

This review examines the impact of microbial communities colonizing food processing environments in the form of biofilms on food safety and food quality. The focus is both on biofilms formed by pathogenic and spoilage microorganisms and on those formed by harmless or beneficial microbes, which are of particular relevance in the processing of fermented foods. Information is presented on intraspecies variability in biofilm formation, interspecies relationships of cooperativism or competition within biofilms, the factors influencing biofilm ecology and architecture, and how these factors may influence removal. The effect on the biofilm formation ability of particular food components and different environmental conditions that commonly prevail during food processing is discussed. Available tools for the in situ monitoring and characterization of wild microbial biofilms in food processing facilities are explored. Finally, research on novel agents or strategies for the control of biofilm formation or removal is summarized.

Modeling the effect of pH, water activity, and ethanol concentration on biofilm formation of Staphylococcus aureus

In this work, the effect of environmental factors on Staphylococcus aureus (ATCC 13150) biofilm formation in tryptic soy broth was investigated under different ranges of pH (3.0-9.5), ethanol concentration (EtOH 0.0-20.0%), and a_w (NaCl, 0.866-0.992). Biofilm formation was quantified using the crystal violet staining method and optical density (OD: 590 nm) measurements. Biofilm formation was significantly stronger at pH and a_w close to S. aureus optimal growth conditions, while it was high at EtOH around 2.5-3.5%. Data sets from the difference between the OD measurements of the test and control (ΔOD) were fitted to the cardinal parameter model (CPM) and cardinal parameter model with inflection (CPMI) to describe the effect of the environmental factors. The models showed good quality of fit for the experimental data in terms of calculated RMSE, with the latter ranging from 0.276 to 0.455. CPM gave a good quality of fit compared to CPMI for the environmental factors tested. Optimal pH was close to neutral (6.76-6.81) and biofilm formation was possible till pH = 3.81-3.78 for CPM and CPMI, respectively. Optimum EtOH and a_w conditions for biofilm formation were in the range of 1.99-2.75 and 0.98-0.97, respectively. Predicted OD values observed using strain 13150 were very closely correlated to the OD values predicted with strain 12600 with R² of 0.978, 0.991, and 0.947 for pH, EtOH, and a_w, respectively. The cultivable bacterial cells within the biofilm were enumerated using standard plate counting and a linear model was applied to correlate the attached biofilm cells to ΔOD of biofilm formation. It was found that the biofilm formation correlated with S. aureus population growth. At 2.5-3.5% of EtOH the maximum population density was lower than that observed at 0.0% of EtOH. As 2.5-3.5% of EtOH initiated a stronger biofilm formation, biofilm formation seems to be induced by ethanol stress. The development of cardinal parameter models to describe the effect environmental factors of importance to biofilm formation, offers a promising predictive microbiology approach to decrypting the S. aureus population growth and survival ability on food processing surfaces.

Predicting adhesion and biofilm formation boundaries on stainless steel surfaces by five Salmonella enterica strains belonging to different serovars as a function of pH, temperature and NaCl concentration

This study aimed to assess the capability of 97 epidemic S. enterica strains belonging to 18 serovars to form biofilm. Five strains characterized as strong biofilm-producers, belonging to distinct serovars (S. Enteritidis 132, S. Infantis 176, S. Typhimurium 177, S. Heidelberg 281 and S. Corvallis 297) were assayed for adhesion/biofilm formation on stainless steel surfaces. The experiments were conducted in different combinations of NaCl (0, 2, 4, 5, 6, 8 and 10% w/v), pH (4, 5, 6 and 7) and temperatures (8 °C, 12 °C, 20 °C and 35 °C). Only adhesion was assumed to occur when S. enterica counts were ≥3 and <5 log CFU/cm², whereas biofilm formation was defined as when the counts were ≥5 log CFU/cm². The binary responses were used to develop models to predict the probability of adhesion/biofilm formation on stainless steel surfaces by five strains belonging to different S. enterica serovars. A total of 99% (96/97) of the tested S. enterica strains were characterized as biofilm-producers in the microtiter plate assays. The ability to form biofilm varied (P < 0.05) within and among the different serovars. Among the biofilm-producers, 21% (20/96), 45% (43/96), and 35% (34/96) were weak, moderate and strong biofilm-producers, respectively. The capability for adhesion/biofilm formation on stainless steel surfaces under the experimental conditions studied varied among the strains studied, and distinct secondary models were obtained to describe the behavior of the five S. enterica tested. All strains showed adhesion at pH 4 up to 4% of NaCl and at 20 °C and 35 °C. The probability of adhesion decreased when NaCl concentrations were >8% and at 8 °C, as well as in pH values ≤ 5 and NaCl concentrations > 6%, for all tested strains. At pH 7 and 6, biofilm formation for S. Enteritidis, S. Infantis, S. Typhimurium, S. Heidelberg was observed up to 6% of NaCl at 35 °C and 20 °C. The predicted boundaries for adhesion were pH values < 5 and NaCl ≥ 4% and at temperatures <20 °C. For biofilm formation, the predicted boundaries were pH values < 5 and NaCl concentrations ≥ 2% and at temperatures <20 °C for all strains. The secondary models obtained describe the variability in boundaries of adhesion and biofilm formation on stainless steel by five strains belonging to different S. enterica serovars. The boundary models can be used to predict adhesion and biofilm formation ability on stainless steel by S. enterica as affected by pH, NaCl and temperature.

Integrated combined effects of temperature, pH and sodium chloride concentration on biofilm formation by Salmonella enterica ser. Enteritidis and Typhimurium under low nutrient food-related conditions

Salmonella enterica is a major foodborne bacterial pathogen. This forms biofilms on surfaces and persists, depending on the strain and the environment. The integrative interaction of temperature (T; 13-39 °C), pH (5-8) and sodium chloride (NaCl) concentration (0.5-8.5%) on biofilm formation by two S. enterica strains (ser. Enteritidis and Typhimurium) was here evaluated under low nutrient conditions. This was achieved using response surface methodology to model the combined effect of each factor on the response, through mathematical quadratic fitting of the outcomes of a sequence of designed experiments. These last were executed by incubating stainless steel coupons carrying sessile bacteria, for 24 h, in 1:10 diluted tryptone soya broth, under 15 different combinations of three independent factors (T, pH and NaCl). For each strain, a second order polynomial model, describing the relationship between biofilm formation (log CFU/cm²) and the factors (T, pH and NaCl), was developed using least square regression analysis. Both derived models predicted the combined influences of these factors on biofilm formation, with agreement between predictions and experimental observations (R² ≥ 0.96, P ≤ 0.0001). For both strains, the increase of NaCl content restricted their sessile growth, while under low salinity conditions (NaCl < 4%) biofilm formation was favored as pH increased, regardless of T. Interestingly, under low salt content, and depending on the strain, biofilm formation was either favored or hindered by increasing T. Thus, 34.5 and 13 °C were the T predicted to maximize biofilm formation by strains Enteritidis and Typhimurium, respectively, something which was also experimentally verified. To sum, these models can predict the interactive influences of crucial food-related factors on biofilm growth of a significant foodborne pathogen towards the efforts to limit its persistence in food industry.

Multifunctional pH sensitive 3D scaffolds for treatment and prevention of bone infection

Multifunctional-therapeutic three-dimensional (3D) scaffolds have been prepared. These biomaterials are able to destroy the S. aureus bacterial biofilm and to allow bone regeneration at the same time. The present study is focused on the design of pH sensitive 3D hierarchical meso-macroporous 3D scaffolds based on MGHA nanocomposite formed by a mesostructured glassy network with embedded hydroxyapatite nanoparticles, whose mesopores have been loaded with levofloxacin (Levo) as antibacterial agent. These 3D platforms exhibit controlled and pH-dependent Levo release, sustained over time at physiological pH (7.4) and notably increased at infection pH (6.7 and 5.5), which is due to the different interaction rate between diverse Levo species and the silica matrix. These 3D systems are able to inhibit the S. aureus growth and to destroy the bacterial biofilm without cytotoxic effects on human osteoblasts and allowing an adequate colonization and differentiation of preosteoblastic cells on their surface. These findings suggest promising applications of these hierarchical MGHA nanocomposite 3D scaffolds for the treatment and prevention of bone infection.

STATEMENT OF SIGNIFICANCE

Multifunctional 3D nanocomposite scaffolds with the ability for loading and sustained delivery of an antimicrobial agent, to eliminate and prevent bone infection and at the same time to contribute to bone regeneration process without cytotoxic effects on the surrounding tissue has been proposed. These 3D scaffolds exhibit a sustained levofloxacin delivery at physiological pH (pH 7.4), which increasing notably when pH decreases to characteristic values of bone infection process (pH 6.7 and pH 5.5). In vitro competitive assays between preosteoblastic and bacteria onto the 3D scaffold surface demonstrated an adequate osteoblast colonization in entire scaffold surface together with the ability to eliminate bacteria contamination.