Chitosan-tripolyphosphate submicron particles as the carrier of entrapped rutin

Construction of a charge-reversal polyelectrolyte nanocarrier for targeted intestinal releasing of kidney tea saponin based on sodium alginate/ε-polylysine/alliin

Herein, a pH-responsive delivery system based on sodium alginate (ALG), ε-polylysine (PLL) and alliin (ALL) has been designed. The innovative use of the charged nature of alliin to prepare carriers loaded with kidney tea saponins has rarely been reported in the literature before. The size and morphology of the complex was quantified by dynamic light scattering (DLS) analysis and scanning electron microscopy (SEM), exhibiting a size of 141 ± 1 nm. The carrier shows effective pH-responsiveness, stability in the gastric environment and dissociation in the intestinal environment. Kidney tea saponins can easily pass through the stomach directly into the intestine after encapsulation at pH = 1. Furthermore, in vitro simulated digestion was used to validate the efficacy of the delivery system. When kidney tea saponin was administered orally, it could reach the intestinal tract barely. However, when it was encapsulated in the carrier, approximately 60 % of the kidney tea saponin could be delivered to the intestinal tract. The strategy increases bioavailability of kidney tea saponins within the intestine successfully. The findings indicate that ALG-PLL-ALL may serve as a suitable delivery system for the intestinal targeted releasing of health factors that are susceptible to hydrolysis and unstable in the stomach.

Rutin-loaded chitosan nanoparticles alleviated Freund's adjuvant induced rheumatoid arthritis via modulating oxidative stress and inflammatory parameters in Wistar rats

Rheumatoid arthritis (RA) is the most common chronic inflammatory disease, primarily affecting the joints and with stromal tissue dysregulation causing chronic inflammation and joint destruction. Rutin is a natural flavonoid with potential therapeutic properties in chronic destructive conditions including rheumatoid diseases. In this study, the protective effects of rutin nanoformulation in an animal model of rheumatoid arthritis caused by Freund's complete adjuvant (FCA) were investigated. Sixty male rats were randomly divided into ten groups including normal, negative control, prednisolone 10 mg/kg (positive control), 3 doses of rutin (15, 30, 45mg/kg), rutin nanoparticles (15, 30, 45 mg/kg), and nanoparticle without rutin, for 28 days. Different behavioral parameters including the open field test, acetone drop test, hot plate test, Von Frey test, and inclined plane test were evaluated. Serum levels of glutathione (GSH), catalase, and nitric oxide as well as histopathological analyses were measured in different groups. Also, matrix metalloproteinase (MMP)-2 and MMP-9 activity were appraised by gelatin zymography. The injection of FCA prolonged the rats' immobility duration in comparison to the control group. Rheumatoid arthritis induction also increased nitric oxide and decreased GSH and catalase levels, while these effects were reversed in the groups that received nanoparticles containing rutin and prednisolone. Rutin nanoparticles suppressed MMP-9 and activated MMP-2. Also, this rutin drug delivery system plays a significant role in the improvement of histopathological symptoms. Considering the improvement of behavioral and tissue symptoms and the modulation of the level of inflammatory cytokines, nanoparticles containing rutin can be proposed as a suitable approach in the management of patients with rheumatoid arthritis.

Assessment of Various Food Proteins as Structural Materials for Delivery of Hydrophobic Polyphenols Using a Novel Co-Precipitation Method

In this study, sodium caseinate (NaCas), soy protein isolate (SPI), and whey protein isolate (WPI) were used as structural materials for the delivery of rutin, naringenin, curcumin, hesperidin, and catechin. For each polyphenol, the protein solution was brought to alkaline pH, and then the polyphenol and trehalose (as a cryo-protectant) were added. The mixtures were later acidified, and the co-precipitated products were lyophilized. Regardless of the type of protein used, the co-precipitation method exhibited relatively high entrapment efficiency and loading capacity for all five polyphenols. Several structural changes were seen in the scanning electron micrographs of all polyphenol-protein co-precipitates. This included a significant decrease in the crystallinity of the polyphenols, which was confirmed by X-ray diffraction analysis, where amorphous structures of rutin, naringenin, curcumin, hesperidin, and catechin were revealed after the treatment. Both the dispersibility and solubility of the lyophilized powders in water were improved dramatically (in some cases, >10-fold) after the treatment, with further improvements observed in these properties for the powders containing trehalose. Depending on the chemical structure and hydrophobicity of the tested polyphenols, there were differences observed in the degree and extent of the effect of the protein on different properties of the polyphenols. Overall, the findings of this study demonstrated that NaCas, WPI, and SPI can be used for the development of an efficient delivery system for hydrophobic polyphenols, which in turn can be incorporated into various functional foods or used as supplements in the nutraceutical industry.

Development and Characterization of Quercetin-Loaded Delivery Systems for Increasing Its Bioavailability in Cervical Cancer Cells

Quercetin is a natural flavonoid with high anticancer activity, especially for related-HPV cancers such as cervical cancer. However, quercetin exhibits a reduced aqueous solubility and stability, resulting in a low bioavailability that limits its therapeutic use. In this study, chitosan/sulfonyl-ether-β-cyclodextrin (SBE-β-CD)-conjugated delivery systems have been explored in order to increase quercetin loading capacity, carriage, solubility and consequently bioavailability in cervical cancer cells. SBE-β-CD/quercetin inclusion complexes were tested as well as chitosan/SBE-β-CD/quercetin-conjugated delivery systems, using two types of chitosan differing in molecular weight. Regarding characterization studies, HMW chitosan/SBE-β-CD/quercetin formulations have demonstrated the best results, which are obtaining nanoparticle sizes of 272.07 ± 2.87 nm, a polydispersity index (PdI) of 0.287 ± 0.011, a zeta potential of +38.0 ± 1.34 mV and an encapsulation efficiency of approximately 99.9%. In vitro release studies were also performed for 5 kDa chitosan formulations, indicating a quercetin release of 9.6% and 57.53% at pH 7.4 and 5.8, respectively. IC50 values on HeLa cells indicated an increased cytotoxic effect with HMW chitosan/SBE-β-CD/quercetin delivery systems (43.55 μM), suggesting a remarkable improvement of quercetin bioavailability.

Polymeric Systems for the Controlled Release of Flavonoids

Flavonoids are natural compounds that are attracting great interest in the biomedical field thanks to the wide spectrum of their biological properties. Their employment as anticancer, anti-inflammatory, and antidiabetic drugs, as well as for many other pharmacological applications, is extensively investigated. One of the most successful ways to increase their therapeutic efficacy is to encapsulate them into a polymeric matrix in order to control their concentration in the physiological fluids for a prolonged time. The aim of this article is to provide an updated overview of scientific literature on the polymeric systems developed so far for the controlled release of flavonoids. The different classes of flavonoids are described together with the polymers most commonly employed for drug delivery applications. Representative drug delivery systems are discussed, highlighting the most common techniques for their preparation. The flavonoids investigated for polymer system encapsulation are then presented with their main source of extraction and biological properties. Relevant literature on their employment in this context is reviewed in relationship to the targeted pharmacological and biomedical applications.

Physicochemical, Thermal, and Morphological Properties of Chitosan Nanoparticles Produced by Ionic Gelation

Chitosan nanoparticles (CSNPs) can be widely used in the food, pharmaceutical, and cosmetic sectors due to their high performance, unique properties, and high surface area. In this research, CSNPs were produced by the ionic gelation method and using sodium tripolyphosphate (STPP) as an appropriate technique compared to the conventional methods. To evaluate the effects of various factors on the size, zeta potential (ZP), and optimal synthesis conditions, different concentrations of CS (1, 3, and 5 mg/mL), STPP (0.5, 0.75, and 1 mg/mL), and CS to STPP ratio (1:1, 3:1, and 5:1) were applied and optimized using the response surface methodology. The size of CSNPs was increased by using higher concentrations of CS, STPP, and CS/STPP ratios. The value of ZP was determined positive and it increased with increasing CS concentrations and CS/STPP ratios. ATR-FTIR spectra revealed interactions between CS and STPP. The DSC thermogram of CSNPs showed a double sharp endothermic peak at about 74.5 °C (ΔH = 122.00 J/g); further, the TGA thermograms indicated the total weight loss of STPP, CS, and CSNPs as nearly 3.30%, 63.60%, and 52.00%, respectively. The XRD data also revealed a greater chain alignment in the CSNPs. Optimized, the CSNPs can be used as promising carriers for bioactive compounds where they also act as efficient stabilizers in Pickering emulsions.

Flavonoids-Based Delivery Systems towards Cancer Therapies

Cancer is the second leading cause of death worldwide. Cervical cancer, for instance, is considered a major scourge in low-income countries. Its development is mostly associated with the human papillomavirus persistent infection and despite the availability of preventive vaccines, they are only widely administered in more developed countries, thus leaving a large percentage of unvaccinated women highly susceptible to this type of cancer. Current treatments are based on invasive techniques, being far from effective. Therefore, the search for novel, advanced and personalized therapeutic approaches is imperative. Flavonoids belong to a group of natural polyphenolic compounds, well recognized for their great anticancer capacity, thus promising to be incorporated in cancer therapy protocols. However, their use is limited due to their low solubility, stability and bioavailability. To surpass these limitations, the encapsulation of flavonoids into delivery systems emerged as a valuable strategy to improve their stability and bioavailability. In this context, the aim of this review is to present the most reliable flavonoids-based delivery systems developed for anticancer therapies and the progress accomplished, with a special focus on cervical cancer therapy. The gathered information revealed the high therapeutic potential of flavonoids and highlights the relevance of delivery systems application, allowing a better understanding for future studies on effective cancer therapy.

The Effect of pH and Sodium Caseinate on the Aqueous Solubility, Stability, and Crystallinity of Rutin towards Concentrated Colloidally Stable Particles for the Incorporation into Functional Foods

Poor water solubility and low bioavailability of hydrophobic flavonoids such as rutin remain as substantial challenges to their oral delivery via functional foods. In this study, the effect of pH and the addition of a protein (sodium caseinate; NaCas) on the aqueous solubility and stability of rutin was studied, from which an efficient delivery system for the incorporation of rutin into functional food products was developed. The aqueous solubility, chemical stability, crystallinity, and morphology of rutin (0.1–5% w/v) under various pH (1–11) and protein concentrations (0.2–8% w/v) were studied. To manufacture the concentrated colloidally stable rutin–NaCas particles, rutin was dissolved and deprotonated in a NaCas solution at alkaline pH before its subsequent neutralisation at pH 7. The excess water was removed using ultrafiltration to improve the loading capacity. Rutin showed the highest solubility at pH 11, while the addition of NaCas resulted in the improvement of both solubility and chemical stability. Critically, to achieve particles with colloidal stability, the NaCas:rutin ratio (w/w) had to be greater than 2.5 and 40 respectively for the lowest (0.2% w/v) and highest (4 to 8% w/v) concentrations of NaCas. The rutin–NaCas particles in the concentrated formulations were physically stable, with a size in the range of 185 to 230 nm and zeta potential of −36.8 to −38.1 mV, depending on the NaCas:rutin ratio. Encapsulation efficiency and loading capacity of rutin in different systems were 76% to 83% and 2% to 22%, respectively. The concentrated formulation containing 5% w/v NaCas and 2% w/v rutin was chosen as the most efficient delivery system due to the ideal protein:flavonoid ratio (2.5:1), which resulted in the highest loading capacity (22%). Taken together, the findings show that the delivery system developed in this study can be a promising method for the incorporation of a high concentration of hydrophobic flavonoids such as rutin into functional foods.

Curcumin, a potent therapeutic nutraceutical and its enhanced delivery and bioaccessibility by pickering emulsions

Curcumin is a biomolecule with functional moieties, which contribute to its anti-inflammatory, anticancer, and antioxidant properties. It has shown several therapeutic effects on treating inflammatory and neurodegenerative diseases and contributes to the reduction of oxidative stress and damage to body tissues. However, its low solubility and fast metabolism limit its absorption in the gastrointestinal (GI) tract and lead to its low bioavailability. Preparation of Pickering emulsions stabilized with mineral or biopolymer-based nanoparticles can be an effective strategy for enhancing the stability of curcumin against degradation, increasing its bioaccessibility in the GI tract, and achieving its controlled release at various locations based on changes in environmental conditions. Various nanoparticles prepared from minerals, proteins, and polysaccharides show potential for stabilizing the curcumin-loaded emulsions, and their wettability can be altered through complexation and formation of hybrid nanoparticles. Stabilization of Pickering emulsions with polysaccharide-based nanoparticles and their complexes can enhance the stability of the curcumin against degradation. Moreover, various protein-based nanoparticles and their conjugated forms with other proteins or polysaccharides can enable the preparation of high internal phase Pickering emulsions (HIPEs) with concomitant higher loading and bioaccessibility of the curcumin molecule. In light of the several therapeutic properties of curcumin, this review article aims to highlight recent studies and the strategies used for the preparation of curcumin Pickering emulsions stabilized by various nanoparticles for enhancing its bioaccessibility during metabolism. These may be useful in pharmaceutical and food industries for drug development and delivery and fortification of food products with this nutraceutical component.

Hybrid chitosan-lipid nanoparticles of green tea extract as natural anti-cellulite agent with superior in vivo potency: full synthesis and analysis

The aim of this work is to exploit the advantages of chitosan (CS) as a nanocarrier for delivery of anti-cellulite drug, green tea extract (GTE), into subcutaneous adipose tissue. Primarily, analysis of herbal extract was conducted via newly developed and validated UPLC method. Ionic gelation method was adopted in the preparation of nanoparticles where the effect lecithin was investigated resulting in the formation of hybrid lipid-chitosan nanoparticles. Optimal formula showed a particle size of 292.6 ± 8.98 nm, polydispersity index of 0.253 ± 0.02, zeta potential of 41.03 ± 0.503 mV and an entrapment efficiency percent of 68.4 ± 1.88%. Successful interaction between CS, sodium tripolyphosphate (TPP) and lecithin was confirmed by Fourier-transform infrared spectroscopy, differential scanning calorimetry and X-ray diffraction. Morphological examination was done using transmission electron microscope and scanning electron microscope confirmed spherical uniform nature of GTE load CS-TPP nanoparticles. Ex vivo permeation study revealed permeability enhancing activity of the selected optimal formula due to higher GTE deposition in skin in comparison to GTE solution. Moreover in vivo study done on female albino Wistar rats carried out for 21 days proved successful potential anti-cellulite activity upon its application on rats’ skin. Histological examination showed significant reduction of adipocyte perimeter and area and fat layer thickness. Results of the current study demonstrated that the developed GTE-loaded CS-TPP nanoparticle comprised of chitosan and lecithin showed permeability enhancing activity along with the proven lipolytic effect of green tea represent a promising delivery system for anti-cellulite activity.

Improving gallic acid and quercetin bioavailability by polymeric nanoparticle formulation

The anticancer activity and pharmacokinetic properties of encapsulated polyherbal nanoparticles (gallic acid (GA) and quercetin nanocomposite) and polyherbal extract (amla and pomegranate fruit peels) in normal and DMH-induced colorectal cancer in rats were examined in this work. In normal and DMH-induced rats, a pharmacokinetic study demonstrated that polyherbal nanoparticles had a typical sustained release profile with a fourfold increase in bioavailability when compared to polyherbal extract. Based on serum-concentration profiles of polyherbal nanoparticles and polyherbal extract following oral administration, the pharmacokinetic parameters for polyherbal nanoparticles and polyherbal extract were established using a single compartmental approach. This research suggests that encapsulating GA and quercetin in polymeric nanoparticles improves their oral bioavailability and anti-colon cancer efficacy. Polymeric nanoparticles could be a novel therapeutic possibility for carcinogenesis prevention.

Chitosan-tripolyphosphate nanoparticles designed to encapsulate polyphenolic compounds for biomedical and pharmaceutical applications - A review

Plant-based polyphenols are natural compounds, present in fruits and vegetables. During recent years, polyphenols have gained special attention due to their nutraceutical and pharmacological activities for the prevention and treatment of human diseases. Nevertheless, their photosensitivity and low bioavailability, rapid metabolism and short biological half-life represent the major limitations for their use, which could be overcome by polyphenols encapsulation (flavonoids and non-flavonoids) into chitosan (CS)-tripolyphosphate (TPP) based nanoparticles (NP). In this review, we particularly focused on the ionic gelation method for the NP design. This contribution exhaustively discusses and compares results of scientific reports published in the last decade referring to ionic gelation applied for the protection, controlled and site-directed delivery of polyphenols. As a consequence, CS-TPP NP would constitute true platforms to transport polyphenols, or a combination of them, to be used for the designing of a new generation of drugs or nutraceuticals.

Colloidal and vesicular delivery system for herbal bioactive constituents

OBJECTIVES

The main objective of the present review is to explore and examine the effectiveness of currently developed novel techniques to resolve the issues which are associated with the herbal constituents/extract.

METHODS

A systematic thorough search and collection of reviewed information from Science direct, PubMed and Google Scholar databases based on various sets of key phrases have been performed. All the findings from these data have been studied and briefed based on their relevant and irrelevant information.

RESULT

Herbal drugs are gaining more popularity in the modern world due to their applications in curing various ailments with minimum toxic effects, side effect or adverse effect. However, various challenges exist with herbal extracts/plant actives such as poor solubility (water/lipid), poor permeation, lack of targeting specificity, instability in highly acidic pH, and liver metabolism, etc. Nowadays with the expansion in the technology, novel drug delivery system provides avenues and newer opportunity towards the delivery of herbal drugs with improved physical chemical properties, pharmacokinetic and pharmacodynamic. Developing nano-strategies like Polymeric nanoparticles, Liposomes, Niosomes, Microspheres, Phytosomes, Nanoemulsion and Self Nano Emulsifying Drug Delivery System, etc. imparts benefits for delivery of phyto formulation and herbal bioactives. Nano formulation of phytoconstituents/ herbal extract could lead to enhancement of aqueous solubility, dissolution, bioavailability, stability, reduce toxicity, permeation, sustained delivery, protection from enzymatic degradation, etc. CONCLUSION: Based on the above findings, the conclusion can be drawn that the nano sized novel drug delivery systems of herbal and herbal bioactives have a potential future for upgrading the pharmacological action and defeating or overcoming the issues related with these constituents. The aims of the present review was to summarize and critically analyze the recent development of nano sized strategies for promising phytochemicals delivery systems along with their therapeutic applications supported by experimental evidence and discussing the opportunities for further aspects.

Potential Applications of Chitosan-Based Nanomaterials to Surpass the Gastrointestinal Physiological Obstacles and Enhance the Intestinal Drug Absorption

The small intestine provides the major site for the absorption of numerous orally administered drugs. However, before reaching to the systemic circulation to exert beneficial pharmacological activities, the oral drug delivery is hindered by poor absorption/metabolic instability of the drugs in gastrointestinal (GI) tract and the presence of the mucus layer overlying intestinal epithelium. Therefore, a polymeric drug delivery system has emerged as a robust approach to enhance oral drug bioavailability and intestinal drug absorption. Chitosan, a cationic polymer derived from chitin, and its derivatives have received remarkable attention to serve as a promising drug carrier, chiefly owing to their versatile, biocompatible, biodegradable, and non-toxic properties. Several types of chitosan-based drug delivery systems have been developed, including chemical modification, conjugates, capsules, and hybrids. They have been shown to be effective in improving intestinal assimilation of several types of drugs, e.g., antidiabetic, anticancer, antimicrobial, and anti-inflammatory drugs. In this review, the physiological challenges affecting intestinal drug absorption and the effects of chitosan on those parameters impacting on oral bioavailability are summarized. More appreciably, types of chitosan-based nanomaterials enhancing intestinal drug absorption and their mechanisms, as well as potential applications in diabetes, cancers, infections, and inflammation, are highlighted. The future perspective of chitosan applications is also discussed.

Performance Study of Nano/SiO2 Films and the Antimicrobial Application on Cantaloupe Fruit Shelf-Life

In the current study, novel films with chitosan/nano/SiO2/nisin films and their antimicrobial application on cantaloupe fruit shelf-life have been studied. Novel films were prepared by the addition of 1% chitosan, 1% nano silicon dioxide, and 1% nisin and freeze-dried for the performance study. Physicochemical properties such as tensile strength, optical, and thermal properties with the performance characteristics of the novel films were measured. Coated and uncoated cantaloupes with various coating solutions were stored and chilled at 4 °C in a relative humidity of 70% for up to nine days. The microbial population measurements have been detected every three days. Results show that the fourier transform infrared intensity (FTIR) of nano/SiO2 and with the addition of nisin (nano/SiO2/n) were higher than chitosan (CH) film except in the wavenumber (3150–3750 cm−1) films peaks. Novel nanofilms enhanced tensile strength as well as optical and thermal properties. XRD analysis reported two distinct peak values of 32.08 and 45.99 to correspond to nano/SiO2/n film orientation (7095) and (3316), respectively. Zeta potential values and turbidity were increased, while nano/SiO2 films decreased the hydrophobicity of the film surface by 80.07°. The coating treatments with nano/SiO2 and nano/SiO2/n both reduced the yeast and mold counts 2.49 and 1.92 log CFU/g, respectively, on day nine. In summary, chitosan/nano/SiO2/n novel film improved the functional properties of coating films, and those bio-nanocomposites are effective in food packaging.

Preparation of rutin-loaded microparticles by debranched lentil starch-based wall materials: Structure, morphology and in vitro release behavior

Different treatments of autoclaving, pullulanase debranching and/or ultrasound were applied to prepare debranched lentil starch (DBLS). Their fine structures can affect the retrogradation patterns of DBLSs, which consequently could affect their potential use as delivery carrier of sensitive bioactive compounds. An attempt was made to use these DBLSs as wall materials to encapsulate rutin, aiming to improve the bioaccessibility, meanwhile to enhance the aqueous solubility and stability of rutin molecules. Their encapsulation efficiency, structural characteristics, thermal stability, morphological features, antioxidant activity and in vitro release behavior under simulated upper gastrointestinal tract environment were evaluated. The results suggested that rutin was dispersed in the DBLS polymer matrix, showing the amorphous nature that further authenticates the encapsulation and entrapment of rutin. The structural analyses of microparticles revealed that rutin could interacted with DBLS biopolymer chains by hydrogen bonds, making the starch molecular chains less susceptible to interact with themselves for reordering. The encapsulation efficiency was found to be in an opposite trend with those values obtained for relative crystallinity, melting enthalpy, degree of order/double helices of DBLS wall materials before encapsulation. The release rate results indicated that DBLS carrier with lower M_w, DP_n and higher molecular order was beneficial for the slower release of rutin encapsulated in the microparticles.

Role of the Encapsulation in Bioavailability of Phenolic Compounds

Plant-derived phenolic compounds have multiple positive health effects for humans attributed to their antioxidative, anti-inflammatory, and antitumor properties, etc. These effects strongly depend on their bioavailability in the organism. Bioaccessibility, and consequently bioavailability of phenolic compounds significantly depend on the structure and form in which they are introduced into the organism, e.g., through a complex food matrix or as purified isolates. Furthermore, phenolic compounds interact with other macromolecules (proteins, lipids, dietary fibers, polysaccharides) in food or during digestion, which significantly influences their bioaccessibility in the organism, but due to the complexity of the mechanisms through which phenolic compounds act in the organism this area has still not been examined sufficiently. Simulated gastrointestinal digestion is one of the commonly used in vitro test for the assessment of phenolic compounds bioaccessibility. Encapsulation is a method that can positively affect bioaccessibility and bioavailability as it ensures the coating of the active component and its targeted delivery to a specific part of the digestive tract and controlled release. This comprehensive review aims to present the role of encapsulation in bioavailability of phenolic compounds as well as recent advances in coating materials used in encapsulation processes. The review is based on 258 recent literature references.

Gentamicin decorated phosphatidylcholine-chitosan nanoparticles against biofilms and intracellular bacteria

Biofilms and intracellular bacteria often cause a series of overwhelming public health issues due to their strong drug resistance. Hence, chitosan nanoparticles (CS NPs), phosphatidylcholine and gentamicin were used to synthesize a novel nanodrug delivery system (GPC NPs). Dynamic light scattering (DLS) demonstrated that the surface zeta-potential of GPC NPs was -19.5 mV. The morphology of GPC NPs was observed by scanning electron microscopy (SEM). The gentamicin adsorption and release behaviors of GPC NPs were also investigated. The GPC NPs could effectively damage and remove the biofilm formed by pathogens through permeation of the antibiotic into the biofilm. In addition, the nanoparticles were readily engulfed by macrophages which facilitated the killing of intracellular bacteria and had neglectable cytotoxicity. Our study indicated that GPC NPs could be used as a promising nanoantibacterial agent against biofilms and intracellular bacteria.

Nanofluid to Nanocomposite Film: Chitosan and Cellulose-Based Edible Packaging

Chitosan (CH)-based materials are compatible to form biocomposite film for food packaging applications. In order to enhance water resistance and mechanical properties, cellulose can be introduced to the chitosan-based film. In this work, we evaluate the morphology and water resistance of films prepared from chitosan and cellulose in their nanoscale form and study the phenomena underlying the film formation. Nanofluid properties are shown to be dependent on the particle form and drive the morphology of the prepared film. Film thickness and water resistance (in vapor or liquid phase) are clearly enhanced by the adjunction of nanocrystalline cellulose.

Synthesis and characterisation of chitosan-encapsulated genistein: its anti-proliferative and anti-angiogenic activities

Aims: The study was carried out to synthesise and characterise the chitosan-encapsulated genistein (CHI-En/Gen) and determine its anti-cancer and anti-angiogenic properties.Methods: The cytotoxic and anti-angiogenic activity of CHI-En/Gen was performed using MTT and chorioallantoic membrane assay. The molecular action was determined using flow cytometry and gene expression.Results: The synthesised CHI-En/Gen was in submicron size, spherical in shape and with entrapment efficiency and loading efficiency of 76.8% (w/w) and 32.6% (w/w), respectively. The CHI-En/Gen notably inhibited the growth and proliferation of human colorectal cancer cells (HT-29) while did not affect the viability of human dermal fibroblast as normal cell. The flow cytometry and the caspase-3 gene expression analyses revealed the apoptotic cells death in the HT-29 cells. Moreover, the encapsulated genistein showed anti-angiogenic activity.Conclusion: The CHI-En/Gen appeared as a promising carrier for the colon delivery of genistein to be used in complementary health approaches for the cancer prevention.

Photoelimination Potential of Chitosan Nanoparticles-Indocyanine Green Complex Against the Biological Activities of Acinetobacter baumannii Strains: A Preliminary In Vitro Study in Burn Wound Infections

Introduction: Acinetobacter baumannii strains are important agents causing serious nosocomial infections including soft-tissue and skin infections in patients with burn wounds which have become resistant to several classes of antibiotics. Antimicrobial photodynamic therapy (aPDT) as an alternative antimicrobial procedure is suggested for the treatment of these kinds of infections. The aim of the current study is to evaluate the antibacterial and anti-biofilm efficiency of aPDT by the utilization of an improved form of indocyanine green (ICG) which is encapsulated in chitosan nanoparticles (NCs@ICG). Methods: NCs@ICG were synthesized and confirmed by the scanning electron microscope (SEM). aPDT was performed using NCs@ICG with an 810 nm wavelength of the diode laser at the fluency of 31.2 J/cm² on 50 A. baumannii strains isolated from burn wounds. The antibacterial and antibiofilm potential of NCs@ICG-aPDT was determined via the colony forming unit (CFU)/mL and crystal violet assays, respectively. In addition, microbial biofilm degradation was evaluated by the SEM. Results: According to the results, NCs@ICG-aPDT showed a significant reduction of 93.2% on the CFU/ mL of planktonic A. baumannii strains compared to the control group (untreated group; P < 0.05). In addition, the biofilm formation of A. baumannii strains was significantly reduced by 55.3% when the bacteria were exposed to NCs@ICG-aPDT (P < 0.05). In contrast, NCs@ICG, ICG, and the diode laser alone were not able to inhibit the CFU/mL and biofilm of A. baumannii strains (P > 0.05). Based on the results of SEM images, NCs@ICG-aPDT disrupted the biofilm structure of A. baumannii strains more than other groups. Conclusion: NCs@ICG-aPDT demonstrates a promising treatment candidate for exploitation in wound infections against both planktonic and biofilm forms of A. baumannii strains.

Chitosan-based nanoparticles as drug delivery systems: a review on two decades of research

Chitosan (CS) is one of the most functional natural biopolymer widely used in the pharmaceutical field due to its biocompatibility and biodegradability. These privileges lead to its application in the synthesis of nanoparticles for the drug during the last two decades. This article gives rise to a general review of the different chitosan nanoparticles (CSNPs) preparation techniques: Ionic gelation, emulsion cross-linking, spray-drying, emulsion-droplet coalescence method, nanoprecipitation, reverse micellar method, desolvation method, modified ionic gelation with radial polymerisation and emulsion solvent diffusion, from the point of view of the methodological and mechanistic aspects involved. The physicochemical behaviour of CSNPs including drug loading, drug release, particles size, zeta potential and stability are briefly discussed. This review also directs to bring an outline of the major applications of CSNPs in drug delivery according to drug and route of administration. Finally, derivatives of CSNPs and CS nano-complexes are also discussed.

Nanoencapsulation of Polyphenols towards Dairy Beverage Incorporation

Phenolic compounds, while widely recognized for their biological potential, when added into food matrixes may interact with food constituents. One example of this is the interaction between phenolic compounds and proteins, that may result in the formation of complexes and alter the bioavailability of both phenolic compounds and the nutrient availability. Moreover, when adding compounds to improve the functionality of a food matrix, these interactions may compromise the perceived benefits of the additions. Nanoencapsulation has been considered one of the means to circumvent these interactions, as they may function as a physical barrier between the phenolic compounds and the matrix (preventing not only the loss of bioactivity, but eventual sensorial alterations of the foods), protect phenolic compounds through the gastrointestinal tract, and may enhance phenolic absorption through cellular endocytosis. However, despite these advantages the food industry is still limited in its nanotechnological solutions, as special care must be taken to use food-grade encapsulants which will not pose any deleterious effect towards human health. Therefore, this review aims to provide an encompassing view of the existing advantages and limitations of nanotechnology, associated with the inclusion of phenolic compounds in dairy beverages.

Statistical optimization of chitosan nanoparticles as protein vehicles, using response surface methodology

BACKGROUND

There has been increased attention given to polymeric nanoparticles as protein carriers. In this regard, chitosan/tripolyphosphate (TPP) nanoparticles are considered to be a simple and efficient carrier. However, to have an ideal protein release profile, we need to optimize the properties of the carrier.

METHODS

This study examined the influence of 4 critical process parameters on the physicochemical characteristics of final nanoparticles. Chitosan-based nanoparticles were produced by ionic gelation, and then the size, polydispersity and zeta potential of those resulting nanoparticles were evaluated. Subsequently, the encapsulation efficiency of bovine serum albumin as model protein was investigated.

RESULTS

The morphologies of nanoparticles were characterized using field emission scanning electron microscopy (FE-SEM). Linear mathematical models were presented for each response through 3 levels using Central Composite Design with the help of design of experiments software, and formulation optimization was performed.

CONCLUSIONS

Such research will serve as a basic study in protein loading into TPP cross-linked chitosan nanoparticles.

Rutin-loaded chitosan microspheres: Characterization and evaluation of the anti-inflammatory activity

Rutin was microencapsulated in a chitosan matrix using the spray-drying technique and the resulting system was investigated. High amounts of rutin were efficiently entrapped within polymeric microspheres, and these microparticles were characterized by a smooth surface and afforded a controlled release of the active compound. The anti-inflammatory activity of rutin-loaded microspheres was investigated in in vitro models of NCTC 2544 and C-28 cells treated with LPS by determining the levels of IL-1β and IL-6. The rutin-loaded microspheres showed an increase of in vitro anti-inflammatory activity with respect to the free active compound. Confocal laser scanning microscopy demonstrated that massive intracellular uptake of the chitosan microspheres took place after a few hours of incubation and that the drug was localized in the cytosol compartment of the treated cells. The improved anti-inflammatory activity of the rutin-loaded microspheres was further confirmed by an in vivo model of carrageenan-induced paw edema.

Synthesis and Characterization of Chitosan Nanoaggregates from Gladius of Uroteuthis duvauceli

We report the synthesis, characterization, and biological properties of chitosan nanoaggregates from gladius of squid, Uroteuthis duvauceli. β-Chitin extracted from gladius was deacetylated to chitosan and further reduced to nanosize using ionic gelation process. The morphology and occurrence of chitosan nanoaggregates (CSNA) were observed using transmission electron microscopy (TEM). The degree of deacetylation (DD%) calculated from Fourier transform infrared (FTIR) spectrum showed high value (~94 ± 1.25%) for chitosan. The CSNA depicts low molecular weight, stable positive zeta potential, and less ash and moisture content with high water and fat binding capacity. The antimicrobial activity was tested against pathogenic microorganisms, which depicted significant rate of inhibition against Staphylococcus aureus and Escherichia coli due to high cellular uptake. The antioxidant analysis for CSNA demonstrated high reducing power and scavenging activity towards superoxide radicals compared with the commercially available chitosan. Furthermore, nanoaggregates exhibited low cytotoxic behavior in biological in vitro tests performed using cervical cancer cell line. These results indicate that chitosan nanoaggregates synthesized from waste gladius will be highly efficient and safe candidate for biological applications as food packing film, drug carrier, and tissue engineering.

Chitosan-tripolyphosphate nanoparticles as Arrabidaea chica standardized extract carrier: synthesis, characterization, biocompatibility, and antiulcerogenic activity

Natural products using plants have received considerable attention because of their potential to treat various diseases. Arrabidaea chica (Humb. & Bonpl.) B. Verlot is a native tropical American vine with healing properties employed in folk medicine for wound healing, inflammation, and gastrointestinal colic. Applying nanotechnology to plant extracts has revealed an advantageous strategy for herbal drugs considering the numerous features that nanostructured systems offer, including solubility, bioavailability, and pharmacological activity enhancement. The present study reports the preparation and characterization of chitosan-sodium tripolyphosphate nanoparticles (NPs) charged with A. chica standardized extract (AcE). Particle size and zeta potential were measured using a Zetasizer Nano ZS. The NP morphological characteristics were observed using scanning electron microscopy. Our studies indicated that the chitosan/sodium tripolyphosphate mass ratio of 5 and volume ratio of 10 were found to be the best condition to achieve the lowest NP sizes, with an average hydrodynamic diameter of 150±13 nm and a zeta potential of +45±2 mV. Particle size decreased with AcE addition (60±10.2 nm), suggesting an interaction between the extract's composition and polymers. The NP biocompatibility was evaluated using human skin fibroblasts. AcE-NP demonstrated capability of maintaining cell viability at the lowest concentrations tested, stimulating cell proliferation at higher concentrations. Antiulcerogenic activity of AcE-NP was also evaluated with an acute gastric ulcer experimental model induced by ethanol and indomethacin. NPs loaded with A. chica extract reduced the ulcerative lesion index using lower doses compared with the free extract, suggesting that extract encapsulation in chitosan NPs allowed for a dose reduction for a gastroprotective effect. The AcE encapsulation offers an approach for further application of the A. chica extract that could be considered a potential candidate for ulcer-healing pharmaceutical systems.