Heavy metals determination in water and food samples after preconcentration by a new nanoporous adsorbent

Micro solid phase extraction of lead and cadmium using functionalized nanodiamonds@CuAl2O4@HKUST-1 nanocomposite for FAAS analysis in food and water samples

This study focuses on the development and application of a novel nanocomposite (functionalized nanodiamonds@CuAl2O4@HKUST-1)-based µ-SPE method for the sensitive and selective extraction of Pb and Cd from food and water samples. The technique offers high sensitivity and selectivity, allowing accurate measurement of these metals at trace levels. The detection limit is 0.031 µg kg-1 for Cd and 0.052 µg kg-1 for Pb, with a relative standard deviation of 1.7 % for Cd and 4.8 % for Pb. The method was successfully applied to real samples and efficiently quantified Pb and Cd in food and natural water samples. The highest concentrations were found in red lentils (0.274 µg kg-1 Pb) and fresh mint (0.197 µg kg-1Cd), but still below recommended limits set by FAO/WHO (300 µg kg-1 for Pb and 200 µg kg-1 for Cd). It promises to ensure food safety, monitor environmental contamination, and informs regulatory decisions to protect public health.

Sensitive colorimetric detection of Pb2+ by geometric field amplification and surface plasmon resonance visualization

Pb²⁺ is one of the major environmental pollutants, which can be visually detected by surface plasmon resonance of nanoparticles. Paper based analytical device, as a newly developed microfluidic detection platform, is featured in cost-effective and suitable for on-site analysis. In this paper, a sensitive and portable detection method for Pb²⁺ was proposed, in which Pb²⁺ was electrokinetically stacked on the paper fluidic channel by geometric field amplification effect and visualized online by glutathione-modified silver nanoparticles. Colorimetric quantification of the visualized stacking band was conducted by smart phone camera. To avoid unfavorable influence from pH change on the surface plasmon resonance visualization, field amplification effect was introduced by geometric design of the paper fluidic channel. The enriched Pb²⁺ was clearly visible on the paper substrate, and the stacking band intensity was about four orders of magnitude enhanced, comparing to the intensity without stacking. A linear response to Pb²⁺ was observed in the range of 0.3-7.0 μM (R² = 0.997) with a limit of detection of 86 nM and a limit of quantity of 0.28 μM. The established method was used in the detection of Pb²⁺ from river and lake water samples, and the results were confirmed by atomic absorption spectroscopy method.

Carbon Paste Modified Electrode as Powerful Sensor Approach Determination of Food Contaminants, Drug Ingredients, and Environmental Pollutants: A Review

Background:

Application of electrochemical sensors for analysis of food, biological and water polluting compounds helps to speed up their analysis in the real samples. Electrochemical sensors with low cost, fast response and portable ability are a better choice compared to traditional methods for analysis of electro-active compounds such as HPLC. Therefore, in recent years, many analytical scientists have suggested this type of analytical method for analysis of food, biological compounds and water pollutants.

Objective:

Due to low cost, easy modification and low non-faradic current, the carbon paste electrode is a suitable choice as a working electrode in the electrochemical and especially voltammetric analysis. On the other hand, modification of carbon paste electrode can improve the quality of the sensor for the analysis of electroactive compounds at nanomolar level.

Electrochemical Determination of Mycophenolate Mofetil in Drug Samples Using Carbon Paste Electrode Modified with 1-methyl-3-butylimidazolium Bromide and NiO/SWCNTs Nanocomposite

Background:

The mycophenolate mofetil is an immunosuppressant drug with wide application in the treatment of cancer and prevent rejection in organ transplantation. This drug showed many sides effects for pregnant women and determination of this drug is very important in the human body.

Objective:

A new electrochemical strategy was described for analysis of Mycophenolate Mofetil (MMF) using novel voltammetric sensor. The sensor was fabricated using NiO/SWCNTs and 1-methyl- 3-butylimidazolium bromide as two conductive mediators for modification of carbon paste electrode (NiO/SWCNTs/MBBr/CPE). The NiO/SWCNTs/MBBr/CPE can be used for analysis of MMF in aqueous buffer solution in the concentration range of 0.08-900 µM. In addition, the NiO/SWCNTs/ MBBr/CPE reduced oxidation over-potential of MMF ~ 80 mV and increased the oxidation current of MMF ~ 2.85 times. In the final step, NiO/SWCNTs/MBBr/CPE was used for determination of MMF in pharmaceutical serum and tablet samples.

A New Nanostructure Square Wave Voltammetric Platform for Determination of Tert-butylhydroxyanisole in Food Samples

Background:

Antioxidants are one of the important additives in food samples due to their role in protecting human cells against the effects of free radicals. The analysis of antioxidants is essential due to the role of antioxidants in improving body health.

Objective:

A square wave voltammetric sensor was fabricated for the determination of tert-butylhydroxyanisole (TBHA) based on the application of CdO/SWCNTs and 1-methyl-3-butylimidazolium chloride as mediators for the modification of carbon paste electrode (MBCl/CdO/SWCNTs/CPE). The MBCl/CdO/SWCNTs/CPE improved the sensitivity of TBHA ~ 6.7 times and showed a linear dynamic range 0.07-600 µM with detection limit 0.02 µA for the analysis of TBHA. The pH investigation confirmed that electro-oxidation of TBHA occurred by exchanging two electrons and two protons. In addition, the MBCl/CdO/SWCNTs/CPE was used for determination of TBHA in food samples.

Pollution Abatement of Heavy Metals in Different Conditions by Water Kefir Grains as a Protective Tool against Toxicity

This research paper addresses the hypothesis that Water Kefir grains can be used as absorbers of metal ions and reports the first application of the Water Kefir grains as a protective tool against toxicity by heavy metal ions. The aim of this study is to evaluate the concentration of heavy metal ions in several Water Kefir solutions during the fermentation process under various conditions. Two colonies of Water Kefir grain were used, and the concentrations of Cd, Co, Cr, Cu, Mn, Ni, Pb, Ba, and Ca were measured in Water Kefir grain solutions at different contact times (0, 24, 48, and 72 hours), different pH values in citric and acetic buffers, and different Water Kefir grains/metal solution ratios, with and without sucrose (5%). Optical emission spectroscopy was used to measure the concentrations of metal ions. Among the tested experimental conditions, the best combination for pollution abatement is sucrose (5%), contact time 24 hours, starting pH = 4.5, acetate buffer, and Kefir grains/metal solution ratio 1 : 1. In these conditions, the heavy metal abatement by Water Kefir grains is particularly effective for Cr and Pb (70%) and good for Cu, Ni, and Mn (50%).

Functionalization of a SiO2-coated magnetic graphene oxide composite with polyaniline–polypyrrole for magnetic solid phase extraction of ultra-trace Cr(iii) and Pb(ii) in water and food samples using a Box–Behnken design

A novel nanocomposite was successfully applied for magnetic solid phase extraction of heavy metals in environmental water and food samples.

Ion Imprinted Polymer for Preconcentration and Determination of Ultra-Trace Cadmium, Employing Flow Injection Analysis with Thermo Spray Flame Furnace Atomic Absorption Spectrometry

This work proposes a preconcentration method using an ion imprinted polymer (IIP) for determination of cadmium, in several samples, employing a mini-column filled with the polymer coupled into a flow injection analysis system with detection by thermospray flame furnace atomic absorption spectrometry (FIA-TS-FF-AAS). The polymer was synthesized via bulk using methacrylic acid and vinylimidazole as a functional monomer. For the FIA system initial assessment, the variables: pH, eluent concentration and buffer concentration were studied, employing a 23 full factorial design. To obtain the optimum values for each significant variable, a Doehlert matrix was employed. After the optimization conditions as: pH 5.8, eluent (HNO3) concentration of 0.48 mol L^-1 and buffer concentration of 0.01 mol L^-1, were adopted. The proposed method showed a linear response in the range of 0.081-10.0 μg L^-1, limits detection and quantification of 0.024 and 0.081 μg L^-1, respectively; preconcentration factor of 165, consumptive index of 0.06 mL, concentration efficiency 132 min^-1, and frequency of readings equal to 26 readings h^-1 The accuracy was checked by analysis of certified reference materials for trace metals and recovery tests. The obtained results were in agreement with 95% confidence level (t-test). The method was adequate to apply in samples of: jewelry (earrings) (2.38 ± 0.28 μg kg^-1), black tea (1.09 ± 0.15 μg kg^-1), green tea (3.85 ± 0.13 μg kg^-1), cigarette tobacco (38.27 ± 0.22 μg kg^-1), and hair (0.35 ± 0.02 μg kg^-1).

Optimized syringe-assisted dispersive micro solid phase extraction coupled with microsampling flame atomic absorption spectrometry for the simple and fast determination of potentially toxic metals in fruit juice and bio-fluid samples

Syringe assisted dispersive micro solid phase extraction coupled with microsampling flame atomic absorption spectrometry as a novel method for potentially toxic metals extraction.

Efficacy of dihydroxy-mercaptopyrimidine functionalized polymeric resin for the trace determination of Cd by SPE coupled flame atomic absorption spectrometry

The efficacy and applicability of a cadmium extractor prepared by functionalizing polystyrene resin with 2-thiobarbituric acid is studied. This is the first time that 2-thiobarbituric acid is reported in solid phase extraction as a chelating resin.