The rheological properties of tara gum (Caesalpinia spinosa)

Effects of dispersing media on the rheological and tribological properties of basil seed mucilage-based thickened liquids

The development of thickening powders for the management of dysphagia is imperative due to the rapid growth of aging population and prevalence of the dysphagia. One promising thickening agent that can be used to formulate dysphagia diets is basil seed mucilage (BSM). This work investigates the effects of dispersing media, including water, milk, skim milk, and apple juice, on the rheological and tribological properties of the BSM-thickened liquids. Shear rheology results revealed that the thickening ability of BSM in these media in ascending order is milk < skim milk ≈ apple juice < water. On the other hand, extensional rheology demonstrated that the longest filament breakup time was observed when BSM was dissolved in milk, followed by skim milk, water, and apple juice. Furthermore, tribological measurements showed varying lubrication behavior, depending on the BSM concentration and dispersing media. Dissolution of BSM in apple juice resulted in the most superior lubrication property compared with that in other dispersing media. Overall, this study provides insights on BSM's application as a novel gum-based thickening powder in a range of beverages and emphasizes how important it is for consumers to have clear guidance for the use of BSM in dysphagia management.

Effect of hydrothermal treatment on the rheological properties of xanthan gum

In this study, the effect of hydrothermal treatment with different temperatures (120-180 °C) on the rheological properties of xanthan gum was evaluated. When the temperature of hydrothermal treatment was relatively low (120 °C), the rheological properties of the hydrothermally treated xanthan gum was similar to the untreated xanthan gum (pseudoplastic and solid-like/gel-like behavior). However, as the temperature of hydrothermal treatment was higher, the rheological properties of the hydrothermally treated xanthan gum changed greatly (e.g., a wider range of Newtonian plateaus in flow curves, existence of a critical frequency between the storage modulus (G') and the loss modulus (G") in the dynamic viscoelasticity measurement, variation of complex viscosity). Although the hydrothermal treatment showed little influence on the functional groups of xanthan gum, it altered the micromorphology of xanthan gum from uneven and rough lump-like to thinner and smoother flake-like. In addition, higher concentration (2 %) of hydrothermally treated xanthan gum made its viscosity close to that of the untreated xanthan gum (1 %). Besides, hydrothermal treatment also affected the effect of temperature and salt (CaCl2) adding on the rheological properties of xanthan gum. Overall, this study can provide some useful information on the rheological properties of xanthan gum after hydrothermal treatment.

Co-Microencapsulation of Cushuro (Nostoc sphaericum) Polysaccharide with Sacha Inchi Oil (Plukenetia huayllabambana) and Natural Antioxidant Extracts

Cushuro (Nostoc sphaericum) polysaccharide was used to co-microencapsulate sacha inchi oil, natural antioxidant extracts from the oleoresin of charapita chili peppers (Capsicum frutescens L.) and grape orujo (Vitis vinifera L.). Encapsulation efficiency, moisture, particle size, morphology, oxidative stability, shelf-life, solubility, essential fatty acid profile, sterol content and antioxidant capacity were evaluated. The formulations with grape orujo extract showed higher oxidative stability (4908 ± 184 h), antioxidant capacity (4835.33 ± 40.02 µg Trolox/g ms), higher phenolic contents (960.11 ± 53.59 µg AGE/g ms) and a smaller particle size (7.55 µm) than the other formulations, as well as good solubility and a low moisture content. Therefore, grape orujo extracts can be used as natural antioxidants. The fatty acid composition (ω-3) remained quite stable in all the formulations carried out, which also occurred for sterols and tocopherols. In combination with gum arabic, grape orujo extract offered oxidative protection to sacha inchi oil during the first week of storage.

Enzyme-catalyzed transesterification of galactomannan extracted from mesquite seed (Prosopis velutina) with vinyl carboxylate esters

Galactomannans (GM) are hemicellulosic polysaccharides composed of D-mannopyranose chains linked by β (1 → 4) glycosidic linkages with branches of D-galactopyranose linked by α (1 → 6) linkages. This polysaccharide is recognized for its hydrophilic character, as it is rich in hydroxyl groups (-OH). This chemical characteristic, combined with the absence of ionic charges, enables structural modifications such as transesterification of the fatty acid chains (FA), which provides a strategy for obtaining amphiphilic structures. The enzyme-catalyzed syntheses were carried out in DMSO with GM decanoate (GMD) and GM palmitate (GMP) at different molar ratios (0.5 and 1.0) and the resulting structures were evaluated with infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (CP/MAS 13C NMR) and differential scanning calorimetry (DSC). The FTIR spectrum confirmed the transesterification of GM with the appearance of a C[bond, double bond]O band (1730-1750 cm-1). These results were confirmed by the signals observed at 177 and 30 ppm in the CP/MAS 13C NMR spectrum, which corresponded to the C[bond, double bond]O groups of the esters and the terminal -CH3 groups of the FA chains, respectively. Finally, DSC showed glass transition temperatures (Tg) in the range 43-51 °C, while the melting temperatures (Tm) of the GM esters (59 °C) were not affected by different degrees of esterification (DE) for GMD (0.37 and 0.71) and GMP (0.47 and 0.57).

Structural and flow rheological properties of pumpkin pectic polysaccharide extracted by citric acid

The present study aimed to investigate the structural and physicochemical characteristics of acid-extracted pumpkin pectic polysaccharide (AcPP) and to evaluate their flow rheological properties. AcPP was extracted from pumpkin pulp using the citric acid extraction method. The physicochemical and structural properties were analyzed by chemical methods and instrumental analyses. The obtained results showed that AcPP consisted predominantly of GalA (85.99 %) and small amounts of Rha, Gal, and Ara, with the ratio of HG/RG-I being 81.39/16.75. In addition, AcPP had medium DE (45.34 %) and contained four macromolecular populations with different Mw of 106.03 (main), 10.15, 4.99, and 2.90 kDa. The NMR analysis further confirmed that AcPP contained a linear backbone consisting of α-1,4-linked GalA residues, some of which were partially methyl-esterified. Furthermore, AcPP was amorphous in nature and had favorable thermal stability. The effects of extrinsic factors on the flow rheological properties of AcPP were evaluated. In particular, the high concentrations of CaCl2 (8 mM) and MgCl2 (10 mM) were effective in enhancing the viscosity and non-Newtonian shear-thinning behavior of the AcPP solution. This study elucidates the unique molecular structure of AcPP and suggests the potential of AcPP as a rheology modifier in low-viscous and mineral-reinforced beverages.

Seed gum-based polysaccharides hydrogels for sustainable agriculture: A review

Globally, water scarcity in arid and semiarid regions has become one of the critical issues that hinder sustainable agriculture. Agriculture, being a major water consumer, presents several challenges that affect water availability. Hydrogels derived from polysaccharides seed gums are hydrophilic polymers capable of retaining substantial moisture in their three-dimensional network and releasing it back into the soil during drought conditions. Implementation of hydrogels in the agricultural sectors enhances soil health, plant growth, and crop yield. Furthermore, the soil permeability, density, structure, texture, and rate of evaporation and percolation of water are modified by hydrogel. In this review, hydrogels based on natural plant seed gum like guar, fenugreek, Tara and locust beans have been discussed in terms of their occurrence, properties, chemical structure, method of synthesis, and swelling behavior. The focus extends to recent applications of modified seed gum-based natural hydrogels in agriculture, serving as soil conditioners and facilitating nutrient delivery to growing plants. The swelling behavior and inherent structure of these hydrogels can help researchers unravel their maximum possibilities to promote sustainable agriculture and attenuate the obstacles propounded by our dynamic nature. The current review also examines market growth, prospects, and challenges of eco-friendly hydrogels in recent times.

Comprehensive molecular level characterization of protein- and polyphenol-rich tara (Caesalpinia spinosa) seed germ flour suggests novel hypothesis about possible accidental hazards

Tara (Caesalpinia spinosa, Leguminosae) seed germ (TSG), a by-product of tara gum (E417) extraction, has been used as a protein- and polyphenol-rich food ingredient for human and animal nutrition. Nevertheless, TSG is the alleged culprit for a recent foodborne outbreak of even severe acute illnesses that have affected hundreds of individuals in the USA, perhaps triggered by nonprotein amino acids such as baikiain. Herein, the composition of TSG has been characterized at molecular level, with a focus on proteins, phenolics, lipids, and mineral composition. TSG contains 43.4 % (w/w) proteins, tentatively identified for the first time by proteomics, and 14 % lipids, consisting of 83.6 % unsaturated fatty acids, especially linoleic acid. Ash is surprising high (6.5 %) because of an elevated concentration of P, K, Ca, and Mg. The detection of a rare earth element such as gadolinium (Gd, 1.6 mg kg-1), likely sourced from anthropogenic pollution, suggests alternative hypotheses for the origin of TSG hazards.

Film-Forming, Moisturizing, and Sensory Properties of a Cosmetic Formulation Containing Tara Gum and Brazilian Berry Extracts

The development of cosmetic formulations with moisturizing and film-forming properties has been very important to help keep skin physiology and protection. In this context, this study aimed to develop a cosmetic formulation containing Tara gum and Brazilian berry extract and evaluate its physical-mechanical, film-forming, and sensory properties. A gel formulation was developed based on Tara gum added to Plinia cauliflora extract and was characterized by its spreadability profile and sensory properties. A clinical study was carried out with ten participants to evaluate the skin microrelief, stratum corneum water content, transepidermal water loss (TEWL), and skin morphological characteristics by reflectance confocal microscopy (RCM) before and after 2 h of application of the formulations. The formulation with Brazilian berry significantly decreased the work of shear parameter, which can be correlated with improved spreadability in the sensory analysis. The clinical study showed that both formulations improved skin hydration and reduced the TEWL. The RCM imaging analysis showed the visible film on the skin surface, a decrease in the size of furrows, an increase in the reflectance of the interkeratinocytes, and reflectance of the stratum corneum for both formulations. These results were more pronounced for the formulation containing Brazilian berry. The Tara gum in the gel formulation promoted the formation and visualization of a polymeric net on the stratum corneum surface, demonstrated by the images obtained from RCM. However, the formulation added with the Brazilian berry extract improved the skin microrelief, honeycomb pattern of the epidermis, and skin hydration in deeper layers of the epidermis.

Natural gums and their derivatives based hydrogels: in biomedical, environment, agriculture, and food industry

The hydrogels based on natural gums and chemically derivatized natural gums have great interest in pharmaceutical, food, cosmetics, and environmental remediation, due to their: economic viability, sustainability, nontoxicity, biodegradability, and biocompatibility. Since these natural gems are from plants, microorganisms, and seaweeds, they offer a great opportunity to chemically derivatize and modify into novel, innovative biomaterials as scaffolds for tissue engineering and drug delivery. Derivatization improves swelling properties, thereby developing interest in agriculture and separating technologies. This review highlights the work done over the past three and a half decades and the possibility of developing novel materials and technologies in a cost-effective and sustainable manner. This review has compiled various natural gums, their source, chemical composition, and chemically derivatized gums, various methods to synthesize hydrogel, and their applications in biomedical, food and agriculture, textile, cosmetics, water purification, remediation, and separation fields.

State-of-the-art advancement in tara gum polysaccharide (Caesalpinia spinosa) modifications and their potential applications for drug delivery and the food industry

In preference to synthetic or petroleum-based materials, current research in food and pharmaceutical industries has focused on the development of biodegradable and sustainable materials due to their low toxicity, and biocompatibility. In particular, the natural water-soluble polysaccharide tara gum (Caesalpinia spinosa) has been widely used as a food-grade and drug-delivery agent due to its biodegradability, and biocompatibility. Moreover, owing to its easily modifiable hydroxy groups, tara gum, and its derivatives have been employed as food packaging films and pharmaceutical materials. In the present critical review, facile grafting methods of tara gum are reviewed, and an up-to-date comprehensive application of tara gum polysaccharides revealed their uses in pH-sensitive food packaging. In addition, modified tara gum materials exhibited improved drug delivery applications with biocompatible properties. The non-toxic nature and non-Newtonian, pseudoplastic rheological properties as well as the synergistic behavior of tara gum with other polysaccharides explore its further industrial applications in several fields. Additionally, several approaches for improving tara gum for use as a stabilizer and thickener for food items, and monitoring food spoilage, have provided notable customized characteristics. In brief, its many advantages make tara gum polysaccharide a promising material for applications in the food and pharmaceutical industries.

Effect of intragranular/extragranular tara gum on sustained gastrointestinal drug delivery from semi-IPN hydrogel matrices

The present research was undertaken to develop semi-IPN hydrogel matrix tablets of tara gum (TG) and carboxymethyl TG (CMTG) for sustained gastrointestinal delivery of highly water soluble tramadol hydrochloride (TH). The matrix tablets were developed by a hybrid process of wet granulation and direct compression technique. Carboxymethyl TG was crosslinked with dual cross-linking ions (Al3+/Ca2+). The uncross-linked component of the semi-IPN matrix was either incorporated within the granules (intragranular TG) or incorporated outside the granules (extragranular TG), prior to compression. The effect of intragranular/extragranular TG on the swelling, erosion and TH release characteristics from the semi-IPN hydrogel matrix tablets was investigated. The key finding of the investigation indicated that intragranular TG expedited TH release, while extragranular TG sustained TH release. Moreover, the effect of cross-linking ions on viscosity, rigidity, cross-link density and TH release behavior from hydrogel matrices was investigated. In-vivo pharmacokinetic performance of the optimized extragranular TG semi-IPN hydrogel matrix (F15) indicated sustained TH release in gastrointestinal milieu.

Molecular characterization of a galactomannan extracted from Tara (Caesalpinia spinosa) seeds

Tara gum (TG) is a polysaccharide extracted from the seeds of a South American tree called Tara (Caesalpinia spinosa). TG is a galactomannan with many applications in the food industry, mainly as an emulsifier and stabilizer agent. In addition, it is also used in the paper and cosmetic industries. In the present study, we performed a molecular characterization based on chemical composition and physicochemical properties to understand the properties behind TG applications. TG was extracted and purified from Tara seeds distributed in different ecoregions of Bolivia. The monosaccharide composition analysis was determined by high-performance anion-exchange chromatography/pulsed amperometric detection (HPAEC-PAD). At the same time, their molecular characteristics, such as molar mass, root-mean-square radius, hydrodynamic radius, conformation, and densities, were studied by asymmetrical flow field-flow fractionation coupled to multi-angle light scattering refractive index (AF4-MALS-dRI), also the specific refractive index increment (dn/dc) was determined for the first time using AF4 for TG. The results revealed that the gum samples are galactomannans composed of mannose (Man) and galactose (Gal) in a ratio of 3.37 (Man/Gal), with an average molar mass range from 2.460 × 107 to 3.699 × 107 Da, distributed in a single population. The root-mean-square radius range from 260.4 to 281.6 nm, and dn/dc is 0.1454. The Kratky plots based on 14 scattering angles indicated that the conformation of all samples corresponds to random coil monodisperse, while their gyration radius/hydrodynamic radius ratio (ρ) is high. All these results suggest that the chains have a low branched density, consistent with the Gal/Man composition. To the best of our knowledge, we report for the first time an integrated physicochemical study of TG relevant to developing emulsifier and stabilizer formulations.

Fluorescence probe technique for determining the hydrophobic interactions and critical aggregation concentrations of Gleditsia microphylla gum, circular Gleditsia sinensis gum, and tara gum

Circular Gleditsia sinensis gum, Gleditsia microphylla gum, and tara gum are galactomannans (GMs) with similar mannose/galactose (M/G) molar ratios, which complicates the characterization of physicochemical properties using conventional methods. Herein, the hydrophobic interactions and critical aggregation concentrations (CACs) of the GMs were compared using a fluorescence probe technique, in which the I1/I3 ratio of pyrene indicated polarity changes. With increasing GM concentration, the I1/I3 ratio decreased slightly in dilute solutions below the CAC but decreased sharply in semidilute solutions above the CAC, indicating that the GMs formed hydrophobic domains. However, increases in temperature destroyed the hydrophobic microdomains and increased the CACs. Higher concentrations of salts (SO42-, Cl-, SCN-, and Al3+) promoted hydrophobic microdomain formation, and the CACs in Na2SO4 and NaSCN solutions were lower than those in pure water. Hydrophobic microdomain formation also occurred upon Cu2+ complexation. Although urea addition promoted hydrophobic microdomain formation in dilute solutions, the microdomains were destroyed in semidilute solutions and the CACs increased. The formation or destruction of hydrophobic microdomains depended on the molecular weight, M/G ratio and galactose distribution of GMs. Therefore, the fluorescent probe technique enables the characterization of hydrophobic interactions in GM solutions, which can provide valuable insight into molecular chain conformations.

Ultrasound-assisted extraction of tamarind xyloglucan: an effective approach to reduce the viscosity and improve the α-amylase inhibition of xyloglucan

BACKGROUND

Water extraction (WE) is the classical extraction method for tamarind xyloglucan (XyG), but its low yield, high viscosity and poor dispersion in aqueous solution are not conducive to the industrial applications. To promote the industrial application of tamarind XyG, an ultrasonic-assisted extraction (UAE) method for extracting low-viscosity XyG from tamarind kernel powder was proposed.

RESULTS

The yield of UAE-XyG was higher (502.33 ± 0.036 g kg^-1 ) than that of WE-XyG (163.43 ± 0.085 g kg^-1 ). UAE reduced the molecular weight, monosaccharide content and apparent viscosity of XyG. The hypoglycemic experiment in vitro showed that UAE-XyG had a stronger inhibitory effect on α-amylase activity than WE-XyG, but its glucose dialysis retardation index was lower.

CONCLUSION

In sum, UAE is a type of extraction method that could effectively improve the yield of XyG and reduce its viscosity to expand its application without reducing its physiological activity. UAE exhibits an excellent potential in the extraction of XyG. © 2022 Society of Chemical Industry.

Preparation and water erosion resistance properties of tara gum-g-poly (acrylic acid-co-methyl methacrylate) emulsion

The main purpose of this paper is to synthesize a new kind of green and environmental protection emulsion, which can be used as water erosion resistant materials. Here, a non-toxic polymer was prepared by grafting acrylic acid (AA) and methyl methacrylate (MMA) onto the long chains of tara gum (TG) to synthesize a copolymer emulsion (TG-g-P (AA-co-MMA)). The structure, thermal stability, morphology and wettability of the polymer were characterized by conventional methods, and the effects of key synthesis conditions on the performance of the emulsion (viscosity) were optimized. The erosion resistance and compressive strength of polymer-treated loess and laterite soils were evaluated under laboratory conditions. The results showed that the successful grafting of AA and MMA monomers onto TG improved its thermal stability and viscosity. In soil performance tests with low amounts of polymer additive, a 0.3 wt% application of TG-g-P (AA-co-MMA) to loess could resist continuous precipitation for >30 h with an erosion rate of 2.0 %. The compressive strength of the laterite treated with 0.4 % TG-g-P (AA-co-MMA) was 3.7 MPa, which was about three times that of the untreated soil. The results from this study suggest that TG-g-P (AA-co-MMA) emulsions have good potential for soil remediation applications.

Al3+/Ca2+ cross-linked hydrogel matrix tablet of etherified tara gum for sustained delivery of tramadol hydrochloride in gastrointestinal milieu

Tara gum (TG) was derivatized to carboxymethyl TG (CMTG) and then cross-linked with Al³⁺/Ca²⁺ ions to prepare Al/Ca cross-linked CMTG matrices for sustained delivery of Tramadol Hydrochloride (TH), a highly water-soluble drug. The effect of Al³⁺/Ca²⁺ ions concentration on swelling, erosion, and drug release behavior from Al/Ca-CMTG matrices was investigated. Al-CMTG matrices had greater cross-linking density, produced a more rigid and denser hydrogel layer than Ca-CMTG matrices. The rate of swelling, erosion, and in vitro drug release from Al-CMTG matrices was slower than from Ca-CMTG matrices. The most important finding of our study indicated that at the same concentration of cross-linking ions, the release of TH from Al-CMTG matrices was slower compared to Ca-CMTG matrices. The optimized formulation containing 9 % w/w AlCl₃ in CMTG matrices released TH in a sustained manner up to 12 h in the gastrointestinal milieu. Moreover, it was observed that the prepared optimized formulation exhibited a more sustained release of TH compared to the marketed product.

Natural Gum-Based Functional Bioactive Films and Coatings: A Review

Edible films and coatings are a current and future food packaging trend. In the food and envi-ronmental sectors, there is a growing need to understand the role of edible packaging and sus-tainability. Gums are polysaccharides of natural origin that are frequently utilized as thickeners, clarifying agents, gelling agents, emulsifiers, and stabilizers in the food sector. Gums come in a variety of forms, including seed gums, mucilage gums, exudate gums, and so on. As a biodegradable and sustainable alternative to petrochemical-based film and coatings, gums could be a promising option. Natural plant gum-based edible packaging helps to ensure extension of shelf-life of fresh and processed foods while also reducing microbiological alteration and/or oxidation processes. In this review, the possible applications of gum-based polymers and their functional properties in development of edible films and coatings, were comprehensively dis-cussed. In the future, technology for developing natural gum-based edible films and coatings might be applied commercially to improve shelf life and preserve the quality of foods.

Metabolomics analysis of salt tolerance of Zygosaccharomyces rouxii and guided exogenous fatty acid addition for improved salt tolerance

BACKGROUND

Zygosaccharomyces rouxii plays an irreplaceable role in the manufacture of traditional fermented foods, which are produced in a high-salt environment. However, there is little research on strategies for improving salt tolerance of Z. rouxii.

RESULTS

In this study, metabolomics was used to reveal the changes in intracellular metabolites under salt stress, and the results show that most of the carbohydrate contents decreased, the contents of xanthohumol and glycerol increased (fold change 4.07 and 5.35, respectively), while the contents of galactinol, xylitol and d-threitol decreased (fold change -9.43, -5.83 and -3.59, respectively). In addition, the content of four amino acids and six organic acids decreased, while that of the ten nucleotides increased. Notably, except for stearic acid (C18:0), all fatty acid contents increased. Guided by the metabolomics results, the effect of addition of seven exogenous fatty acids (C12:0, C14:0, C16:0, C18:0, C16:1, C18:1, and C18:2) on the salt tolerance of Z. rouxii was analyzed, and the results suggested that four exogenous fatty acids (C12:0, C16:0, C16:1, and C18:1) can increase the biomass yield and maximum growth rate. Physiological analyses demonstrated that exogenous fatty acids could regulate the distribution of fatty acids in the cell membrane, increase the degree of unsaturation, improve membrane fluidity, and maintain cell integrity, morphology and surface roughness.

CONCLUSION

These results are applicable to revealing the metabolic mechanisms of Z. rouxii under salt stress and screening potential protective agents to improve stress resistance by adding exogenous fatty acids. © 2022 Society of Chemical Industry.

The Protective Effect of Polysaccharide SAFP from Sarcodon aspratus on Water Immersion and Restraint Stress-Induced Gastric Ulcer and Modulatory Effects on Gut Microbiota Dysbiosis

Sarcodon aspratus is a popular edible fungus for its tasty flavour and can be used as a dietary supplement for its functional substances. This study was conducted to evaluate the potential health benefits of Sarcodon aspratus polysaccharides (SAFP) on water immersion and restraint stress (WIRS)-induced gastric ulcer in rats. The results indicated that SAFP could decrease myeloperoxidase (MPO) activity and plasma corticosterone levels, as well as enhance Prostaglandin E2 (PGE2) and Nitrate/nitrite (NOx) concentration in rats. Furthermore, SAFP significantly attenuated the stress damage, inflammation, pathological changes and gastric mucosal lesion in rats. Moreover, high-throughput pyrosequencing of 16S rRNA suggested that SAFP modulated the dysbiosis of gut microbiota by enhancing the relative abundance of probiotics, decreasing WIRS-triggered bacteria proliferation. In summary, these results provided the evidence that SAFP exerted a beneficial effect on a WIRS-induced gastric ulcer via blocking the TLR4 signaling pathway and activating the Nrf2 signaling pathway. Notably, SAFP could modulate the WIRS-induced dysbiosis of gut microbiota. Thus, SAFP might be explored as a natural gastric mucosal protective agent in the prevention of gastric ulcers and other related diseases in the food and pharmaceutical industries.

Interaction between Gelatin and Mulberry Leaf Polysaccharides in Miscible System: Physicochemical Characteristics and Rheological Behavior

In this study, the miscible system was formed by mixing gelatin (G) with mulberry leaf polysaccharides (MLPs) continuously extracted with a hot buffer (HBSS), a chelating agent (CHSS), a dilute alkali (DASS), and a concentrated alkali (CASS), and the zeta potential, turbidity, particle size, distribution, and rheological properties of the miscible systems were evaluated. Under acidic conditions, the miscible systems of four polysaccharides and gelatin were in a clear state; under alkaline conditions, G-HBSS and G-CHSS were clarified, and G-DASS and G-CASS changed from clarification to turbidity. The zeta potential changed from positive to negative with the increase in pH. When the pH was at 7, it increased with the increase in polysaccharide concentration but was still negative. The four miscible systems all showed polydispersity. The particle sizes of G-HBSS and G-CHSS decreased with the increase in pH, while the particle sizes of G-DASS and G-CASS were increased. The four miscible systems showed “shear thinning” behavior, and the addition of gelatin reduced the apparent viscosity of the four polysaccharide solutions. G-CHSS was highly stable, and G-CASS was more suitable as a stabilizer in the freezing process.

One-pot biofabrication and characterization of Tara gum/Riceberry phenolics-silver nanogel: A cytocompatible and green nanoplatform with multifaceted biological applications

This work proposed a one-pot green route for the development of a biocompatible Tara gum-Riceberry phenolics‑silver nanosphere hybrid nanocomposite (TG/RiPE-SNG) with manifold biological potentialities. The reaction system comprised of AgNO₃ as nanosilver precursor, Riceberry phenolic extract as the green in situ reductant, and Tara gum as stabilizing and anchoring agent. TG/RiPE-SNG was extensively characterized using UV-vis spectroscopy, FTIR, RAMAN, TEM, FESEM, EDX, DLS/zeta potential, XRD, and TGA analyses. Small, stable, spherical, well-dispersed SNP with an average particle size of 13.01 nm and λ_max of 421 nm were synthesized in situ, and uniformly distributed within the gel-like TG/RiPE composite. The prepared nanocomposite demonstrated superior antibacterial properties (MIC of 12.5 μg/mL) against S. aureus and S. epidermidis compared to the gum or extract. Additionally, TG/RiPE-SNG exhibited strong light barrier, tyrosinase inhibitory and antioxidant functionalities. TG/RiPE-SNG also exhibited high stability at different pH and was more thermally stable relative to the plain TG/RiPE composite. Furthermore, TG/RiPE-SNG showed good biocompatibility towards mouse L929 fibroblasts and rat erythrocytes. The obtained findings revealed a simple, benign, and inexpensive approach using only natural ingredients for the preparation of gum-based biopolymer-nanosilver hybrid nanocomposite and underscored the strong attributes of TG/RiPE-SNP as a nanomaterial with desirable biomedical potentials.

Extraction of Natural Gum from Cold-Pressed Chia Seed, Flaxseed, and Rocket Seed Oil By-Product and Application in Low Fat Vegan Mayonnaise

This study involves the modeling of rheological behavior of the gum solution obtained from cold-pressed chia seed (CSG), flaxseed (FSG), and rocket seed (RSG) oil by-products and the application of these gums in a low-fat vegan mayonnaise formulation as fat replacers and emulsifier. CSG, FSG, and RSG solutions showed shear-thinning flow behavior at all concentrations. The K values ranged between 0.209 and 49.028 Pa·sn for CSG, FSG, and RSG solutions and significantly increased with increased gum concentration. The percentage recovery for the G' was significantly affected by gum type and concentrations. CSG, FSG, and RSG showed a solid-like structure, and the storage modulus (G') was higher than the loss modulus (G″) in all frequency ranges. The rheological characterization indicated that CSG, FSG, and RSG could be evaluated as thickeners and gelling agents in the food industry. In addition, the rheological properties, zeta potential, and particle size and oxidative stability (at 90 °C) of low-fat vegan mayonnaise samples prepared with CSG, FSG, and RSG were compared to samples prepared with guar gum (GG), Arabic gum (AG), and xanthan gum (XG). As a result, CSG, FSG, and RSG could be utilized for low-fat vegan mayonnaise as fat and egg replacers, stabilizers, and oxidative agents. The results of this study indicated that this study could offer a new perspective in adding value to flaxseed, chia seed, and rocket seed cold-press oil by-product.

Natural Gums as Oleogelators

The natural gums used as high molecular weight oleogelators are mainly polysaccharides that deliver a broad spectrum of possible utilization methods when structuring liquid fats to solid forms. The review discusses a natural gums’ structuring and gelling behavior to capture the oil droplets and form the water/oil gelling emulsions basing on their structural conformation, internal charge, and polymeric characteristics. The specific parameters and characteristics of natural gums based oleogels are also discussed. In the future, oleogels may eliminate saturated and trans fats from food products and allow the production of low-fat products, thus reducing the environmental damage caused by the excessive use of palm oil. The increasing knowledge of molecular interaction in polysaccharide chains of natural gums allows to apply more sustainable and wiser strategies towards product formulation. Innovative solutions for using oleogels based on natural polysaccharide biopolymers let incorporate them into the food matrix and replace fats completely or create blends containing the source of fats and the addition of the oleogel. The profound insight into molecular characteristics of natural gums in the function of being oleogelators is presented.

Physical, sensory, and simulated mastication properties of texture-modified Spanish sauce using different texturing agents

This study aims to evaluate the colour texture, flow, viscoelastic, sensory, and simulated mastication properties, in the presence and absence of artificial saliva, of texture-modified Spanish sauce at different temperatures (25 °C, 37 °C and/or 55 °C). Sauce texture was modified using five hydrocolloids (modified starch (MS), guar gum (GG), tara gum (TG), sodium carboxymethylcellulose (CMC), and chia seed mucilage (CSM) as an alternative texturing agent), achieving two well-differentiated consistencies: honey-like and pudding-like. The MS, GG, TG and CSM sauces showed greater consistency, firmness, stiffness, and resistance to flow than the CMC samples. Furthermore, the internal structure of CMC sauces was the most affected by temperature changes. The addition of saliva decreased the apparent viscosity, consistency, and adhesiveness of the sauces. Among the samples studied, the GG and CSM texture-modified sauces would be suitable for dysphagic patients because of their good elasticity, relatively high resistance to deformation and structural stability, as well as better resistance to salivary α-amylase action. However, CSM sauces obtained the lowest sensory attribute scores. This work opens the door to the use of CSM as a texturing agent and demonstrates the importance of considering not only the hydrocolloid type and consistency level, but also the administration temperature of dysphagia-oriented products. Selecting a suitable texturing agent is of great importance for safe and easy swallowing by dysphagic patients.

Effect of cosolutes on the rheological and thermal properties of Tara gum aqueous solutions

The influence of the concentration (5-20 mg/mL) of different cosolutes (sucrose and NaCl) on the rheological and thermal properties of concentrated Tara gum (TG) solutions (1.5-2.5% w/v) was investigated. Furthermore, the structural properties of the TG, TG-sucrose and TG-NaCl solutions were studied. The TG, TG-sucrose and TG-NaCl solutions exhibited a pseudoplastic and typical viscoelastic behavior of an entangled network structure. An increase in the TG concentration increased the pseudoplasticity and the elasticity of the solutions, while the incorporation of NaCl reduced these properties. Sucrose had little influence on the rheological properties of the TG solutions. The texture profile and the water holding capacity of the TG solutions were significantly influenced by the concentration of the TG and did not change with the addition of the cosolutes. The thermal stability of the TG solutions was reduced by NaCl and was not altered by sucrose. The microstructures of the TG solutions was significantly affected by NaCl, supporting the results obtained from rheological and thermal analyses. The results of this study may be useful for the formulation and processing of foods containing TG.

Prunus armeniaca gum exudates: An overview on purification, structure, physicochemical properties, and applications

Prunus armeniaca gum exudate (PAGE) is obtained from the trunk branches of apricot trees. PAGE is a high-molecular-weight polysaccharide with arabinogalactan structure. The physicochemical and rheological characteristics of this gum have been investigated in various researches. PAGE offers a good potential for use as an emulsifying, binding, and stabilizing agent in food and pharmaceutical industries. It also can be used as an organic additive in tissue culture media, synthesizing of metallic nanoparticles, binding potential in tablets, antioxidant agent, and corrosion inhibitor. For desirable emulsifying, stabilizing, shelf life-enhancing properties, and antioxidant activity of PAGE, it can be used as additive in many foods. We present here a comprehensive review on the existing literatures on characterization of this source of polysaccharide to explore its potential applications in various systems.

Heat preadaptation improved the ability of Zygosaccharomyces rouxii to salt stress: a combined physiological and transcriptomic analysis

Zygosaccharomyces rouxii plays important roles in the brewing process of fermented foods such as soy sauce, where salt stress is a frequently encountered condition. In this study, effect of heat preadaptation on salt tolerance of Z. rouxii and the protective mechanisms underlying heat preadaptation were investigated based on physiological and transcriptomic analyses. Results showed that cells subjected to heat preadaptation (37 °C, 90 min) prior to salt stress aroused many physiological responses, including maintaining cell surface smooth and intracellular pH level, increasing Na⁺/K⁺-ATPase activity. Cells subjected to heat preadaptation increased the amounts of unsaturated fatty acids (palmitoleic C16:1, oleic C18:1, linoleic C18:2) and decreased the amounts of saturated fatty acids (palmitic C16:0, stearic C18:0) which caused the unsaturation degree (unsaturated/saturated = U/S ratio) increased by 2.4 times when compared with cells without preadaptation under salt stress. Besides, salt stress led to increase in contents of 5 amino acids (valine, proline, threonine, glycine, and tyrosine) and decrease of 2 amino acids (serine and lysine). When comparing the cells pre-exposed to heat preadaptation followed by challenged with salt stress and the cells without preadaptation under salt stress, the serine, threonine, and lysine contents increased significantly. RNA sequencing revealed that the metabolic level of glycolysis by Z. rouxii was weakened, while the metabolic levels of the pentose phosphate pathway and the riboflavin were enhanced in cells during heat preadaptation. Results presented in this study may contribute to understand the bases of adaptive responses in Z. rouxii and rationalize its exploitation in industrial processes.Key points• Heat preadaptation can improve high salinity tolerance of Z. rouxii.• Combined physiological and transcriptomic analyses of heat preadaptation mechanisms.• Provide theoretical support for the application of Z. rouxii.

Arabinoxylan and rhamnogalacturonan mucilage: Outgoing and potential trends of pharmaceutical, environmental, and medicinal merits

Demand for safe, environmentally friendly and minimally processed food additives with intrinsic technological (stabilizing, texturizing, structuring) and functional potential is already on the rise. There are actually several natural excipients eligible for pharmaceutical formulation. Mucilage, as a class constitutes arabinoxylan and rhamnogalacturonan-based biomolecules used in the pharmaceutical, environmental as well as phytoremediation industries owing to its particular structure and properties. These compounds are widely used in pharmaceutical, food and cosmetics, as well as, in agriculture, paper industries. This review emphasizes mucilage valuable applications in the pharmaceutical and industrial fields. In this context, much focus has recently been given to the valorization of mucilage as an ingredient for food or nutraceutical applications. Furthermore, different optimization and extraction techniques are presented to develop better utilization and/or enhanced yield of mucilage. The highlighted mucilage extraction methods warrant assessing up-scale processes to encourage for its industrial applications. The current article capitalizes on cutting-edge characteristics of mucilage and posing for other possible innovative applications in non-food industries. Here, the first holistic overview of mucilage with regards to its physicochemical properties and potential novel usages is presented.