Preparation, characterisation and physicochemical properties of the phosphate modified peanut protein obtained from Arachin Conarachin L

Sulfonated cottonseed hydrolysates with adjustable amphiphilicity as environmental -Stress stable emulsifiers

Cottonseed protein isolate (CPI) is a valuable agro-industrial waste with potential biotechnological applications. However, inadequate stability in water due to its characteristic hinders its widespread use. Therefore, a new sulfonation modification approach was developed to improve the amphiphilicity and structural flexibility of CPI. Structural characterizations confirmed the successful incorporation of sulfonate groups with structural and conformational changes. This significantly unfolded molecular-chain, and improved amphiphilicity, flexibility, and surface-hydrophobicity while reducing pI (5.1-1.7), and molecular-weight (5745-2089 g/mol). The modified samples exhibited improved emulsification with higher amounts of absorbed proteins on the droplet interface, smaller droplet size, and a higher zeta-potential. Additionally, they possessed good emulsification ability under acidic conditions. The nano-emulsions exhibited long-term stability (≥70 days) under different environmental conditions, with excellent fluidity. This study contributes to understanding sulfonation as a viable approach for improving protein properties, thus, opening up new possibilities for their application and maximizing their economic benefits.

Insight into the solubilization mechanism of wheat gluten by protease modification from conformational change and molecular interaction perspective

The low solubility limits the utilization of other functional characteristics of wheat gluten (WG). This study effectively improved the solubility of WG through protease modification and explored the potential mechanism of protease modification to enhance the solubility of WG, further stimulating the potential application of WG in the food industry. Solubility of WG modified with alkaline protease, complex protease, and neutral protease was enhanced by 98.99%, 54.59%, and 51.68%, respectively. Notably, the content of β-sheet was reduced while the combined effect of hydrogen bond and ionic bond were increased after protease modification. Meanwhile, the reduced molecular size and viscoelasticity as well as the elevated surface hydrophobicity, thermostability, water absorption capacity, and crystallinity were observed in modified WG. Moreover, molecular docking indicated that protease was specifically bound to the amino acid residues of WG through hydrogen bonding, hydrophobic interaction, and salt bridge.

The effects of sucrose/NaCl combined pickling on the textural characteristics, moisture distribution, and protein aggregation behavior of egg yolk

Salted egg yolks have a tender, loose, gritty, and oily texture and are commonly employed as fillings in baked goods. This study investigated the formation mechanism of egg yolk gels using three different pickling methods: NaCl, sucrose, and mixed groups. The results revealed that of these pickling methods, egg yolks pickled with the mixture had the lowest moisture content (11.59% at 25°C and 10.21% at 45°C), almost no free water content, and the highest hardness (19.11 N at 25°C and 31.01 N at 45°C). Intermolecular force measurements indicated that pickling with the mixture mitigated the surface hardening effect of sucrose and facilitated protein cross-linking. Moreover, confocal laser scanning microscopy of the egg yolk gels pickled with the mixture displayed macromolecular aggregates and oil exudation, suggesting that this method partially disrupted the lipoprotein structure and notably promoted yolk protein aggregation and lipid release. Overall, egg yolks formed a dense gel via the mixed pickling method owing to the ionic concentration and dehydration effects. These findings show the impact of NaCl and sucrose in pickling egg yolks, providing a crucial foundation for developing innovative and desirable egg yolk products. PRACTICAL APPLICATION: This study introduces a novel pickling strategy that combines sucrose and NaCl for egg yolk processing. The egg yolk pickled using this method exhibited improved quality according to the evaluated textural characteristics, moisture distribution, and protein aggregation behavior. The findings may broaden the use of sucrose as a pickling agent for egg yolk processing and provide new ideas for developing and producing pickled eggs and other food products.

New insight into yolk sphere microgel structure impacted by lipid and protein distribution changing under heating processing

The gel structure of boiled, shelled egg yolk is formed by the accumulation of yolk spheres, which are rich in lipids and proteins, and investigating the properties of the lipid-protein complex gel structure of the yolk sphere under heating is important. In this study, we used SEM and CLSM to confirm lipid migration and protein aggregation. We observed that during the heating process, the thermal stability decreased, and there was an increase in the content of β-turns and the degrees of freedom of water and lipids. G' increased during the frequency sweep but decreased after heating for 120 min. The various yolk gel structures exhibited varying degrees of resistance to compression from external forces. Prolonged heating resulted in the presence of gaps and increased surface roughness of the spheres. In conclusion, heating induced lipid migration and protein aggregation in the sphere microgels, thereby altering the structural properties of the gels.

Effect of high moisture extrusion on the structure and physicochemical properties of Tartary buckwheat protein and its in vitro digestion

Tartary buckwheat is rich in nutrients and its protein supports numerous biological functions. However, the digestibility of Tartary buckwheat protein (TBP) poses a significant limitation owing to its inherent structure. This study aimed to assess the impact of high moisture extrusion (HME, 60 % moisture content) on the structural and physicochemical attributes, as well as the in vitro digestibility of TBP. Our results indicated that TBP exhibited unfolded and amorphous microstructures after HME. The protein molecular weight of TBP decreased after HME, and a greater degradation was observed at 70 °C than 100 °C. In particular, HME at 70 °C caused an almost complete disappearance of bands near 35 kDa compared with HME at 100 °C. In addition, compared with native TBP (NTBP, 44.53 µmol/g protein), TBP subjected to HME at 70 °C showed a lower disulfide bond (SS) content (42.67 µmol/g protein), whereas TBP subjected to HME at 100 °C demonstrated a higher SS content (45.70 µmol/g protein). These changes endowed TBP with good solubility (from 55.96 % to 83.31 % at pH 7), foaming ability (20.00 %-28.57 %), and surface hydrophobicity (8.34-23.07). Furthermore, the emulsifying activity (EA) and in vitro digestibility are closely related to SS content. Notably, extruded TBP (ETBP) obtained at 70 °C exhibited higher EA and digestibility than NTBP, whereas ETBP obtained at 100 °C showed the opposite trend. Consequently, HME (especially at 70 °C) demonstrated significant potential as a processing technique for improving the functional and digestive properties of TBP.

Improvement of amphipathic properties with molecular structure unfolding and activation of cottonseed protein as ultra stable and safe emulsifier by deamidation

By-product cottonseed proteins are excellent options for numerous applications due to their superior properties and lower cost. However, its complex folded structure and large molecular weight lead to lower reactivity and insufficient amphiphilicity. Cottonseed protein isolate (CPI) is less-soluble in water. Therefore, we improved the amphiphilicity of CPI with associated hydrolysis, molecular structure unfolding, and activation by alkaline-induced deamidation (at 24, 36, and 72 h) and produced three cottonseed protein hydrolysates CPH 24, 36, and 72. FTIR/UV-CD measurements confirmed the conformational changes and conversion of the structural content. Particle size decreased 2503.4-771.8 nm, while surface hydrophobicity (133.5-326.7), carboxyl content (1.13 × 10־3-2.09 × 10־3), and flexibility increased, signifying hydrolysis, unfolding, and amphiphilicity improvement. Longer deamidation (CPH 72) exhibited the best properties, its prepared emulsions were long-term stable under all the environmental stresses without visible phase separation after at least 40 days of storage except at pH 4. Compared to CPI, it had smaller droplets (939.3-264.9 nm) and larger absolute ζ-potential (-26.5 to -58.0 mV). From the in-vitro cytotoxicity test, deamidated CPI is extremely safer than commonly used synthetic surfactants. This research provides a new method for producing multifunctional emulsifiers from CPI, which could be utilized in the development of functional foods/non-foods.

The Impact of AAPH-Induced Oxidation on the Functional and Structural Properties, and Proteomics of Arachin

The aim of this study was to investigate the effect of 2,2'-azobis (2-amidinopropane) dihydrochloride (AAPH)-induced oxidation on the functional, structural properties and proteomic information of arachin. The results showed that moderate oxidation improved the water/oil holding capacity of proteins and increased the emulsifying stability, while excessive oxidation increased the carbonyl content, reduced the thiol content, altered the structure and thermal stability, and reduced most of the physicochemical properties. Through LC-QE-MS analysis, it was observed that oxidation leads to various modifications in arachin, including carbamylation, oxidation, and reduction, among others. In addition, 15 differentially expressed proteins were identified. Through gene ontology (GO) analysis, these proteins primarily affected the cellular and metabolic processes in the biological process category. Further Kyoto encyclopedia of genes and genomes (KEGG) analysis revealed that the "proteasome; protein processing in the endoplasmic reticulum (PPER)" pathway was the most significantly enriched signaling pathway during the oxidation process of arachin. In conclusion, this study demonstrated that AAPH-induced oxidation can alter the conformation and proteome of arachin, thereby affecting its corresponding functional properties. The findings of this study can potentially serve as a theoretical basis and foundational reference for the management of peanut processing and storage.

Comprehensive Analysis of Physicochemical, Functional, Thermal, and Morphological Properties of Microgreens from Different Botanical Sources

Due to the significant increase in global pollution and a corresponding decrease in agricultural land, there is a growing demand for sustainable modes of modern agriculture that can provide nutritious food. In this regard, microgreens are an excellent option as they are loaded with nutrients and can be grown in controlled environments using various vertical farming approaches. Microgreens are salad crops that mature within 15-20 days, and they have tender leaves with an abundant nutritive value. Therefore, this study aims to explore the physicochemical, techno-functional, functional, thermal, and morphological characteristics of four botanical varieties of microgreens, including carrot (Daucus carota), spinach (Spinacia oleracea), bathua (Chenopodium album), and Bengal gram (Cicer arietinum), which are known for their exceptional nutritional benefits. Among the four botanical varieties of microgreens studied, bathua microgreens demonstrated the highest protein content (3.40%), water holding capacity (1.58 g/g), emulsion activity (56.37%), and emulsion stability (53.72%). On the other hand, Bengal gram microgreens had the highest total phenolic content (32.2 mg GAE/g), total flavonoid content (7.57 mg QE/100 g), and DPPH activity (90.60%). Fourier transform infrared spectroscopy analysis of all microgreens revealed the presence of alkanes, amines, and alcohols. Moreover, X-ray diffraction analysis indicated low crystallinity and high amorphousness in the microgreens. Particle size analysis showed that the median, modal, and mean sizes of the microgreens ranged from 110.327 to 952.393, 331.06 to 857.773, and 97.567 to 406.037 μm, respectively. As per the observations of the results, specific types of microgreens can be utilized as an ingredient in food processing industry, including bakery, confectionery, and more, making them a promising nutritive additive for consumers. This study sheds light on various food-based analytical parameters and offers a foundation for future research to fully harness the potential of microgreens as a novel and sustainable food source, benefiting both the industry and consumers alike.

Purification, Identification, Chelation Mechanism, and Calcium Absorption Activity of a Novel Calcium-Binding Peptide from Peanut (Arachis hypogaea) Protein Hydrolysate

A novel calcium-binding peptide was purified from peanut protein hydrolysate using gel filtration chromatography and identified using HPLC-MS/MS. Its amino acid sequence was determined as Phe-Pro-Pro-Asp-Val-Ala (FPPDVA, named as FA6) with the calcium-binding capacity of 15.67 ± 0.39 mg/g. Then, the calcium chelating characteristics of FPPDVA were investigated using ultraviolet-visible absorption spectroscopy, fluorescence spectroscopy, Fourier transform infrared spectroscopy, particle size, and zeta potential. The results showed that FPPDVA interacted with calcium ions, the chelation of calcium ions induced FPPDVA to fold and form a denser structure, the calcium-binding sites may mainly involve oxygen atoms from the carboxyl residues of Asp and Ala, and Phe possessed contact energy and carbonyl residues of Val. Microstructure analysis showed that FPPDVA-calcium chelate exhibited a regularly ordered and tightly aggregated sheets or block structures. Additionally, FPPDVA-calcium chelate had good gastrointestinal digestive stability and thermal stability. The results of everted rat intestinal sac and Caco-2 cell monolayer experiments showed that FPPDVA-calcium chelate could promote calcium absorption and transport through the Cav1.3 and TRPV6 calcium channels. These data suggest that FPPDVA-calcium chelate possesses the potential to be developed and applied as calcium supplement.

The phenolic profile of walnut meal protein isolate and interaction of phenolics with walnut protein

The aim of this study was to interpret the interaction of phenolics with walnut protein and determine their effects on protein functional properties. The phenolic profiles of walnut meal (WM) and walnut meal protein isolate (WMPI) were established using UPLC-Q-TOF-MS. A total of 132 phenolic compounds were detected, including 104 phenolic acids and 28 flavonoids. Phenolic compounds bound to protein via hydrophobic interactions, hydrogen bonds, and ionic bonds were identified in WMPI. They were also present as free forms, but the hydrophobic interactions and hydrogen bonds were the main non-covalent binding forces between phenolics and walnut proteins. The interaction mechanisms were further supported by the fluorescence spectra of WMPI with ellagic acid and quercitrin. In addition, changes in the functional properties of WMPI after removal of phenolic compounds were evaluated. Dephenolization significantly increased water holding capacity, oil absorptive capacity, foaming capacity, foaming stability, emulsifying stability index, and the in vitro gastric digestibility. However, in vitro gastric-intestinal digestibility was not significantly affected. These results provide insights into the interactions between walnut protein and phenolics, which indicates potential strategies for removing phenolics from walnut protein.

Detoxification of Meghalayan cherry (Prunus nepalensis) kernel and its effect on structural and thermal properties of proteins

Valorizing food wastes and by-products can improve economic and environmental sustainability of the food production chain. In this regard, Meghalayan cherry kernels are a good source of proteins, but the presence of toxic compounds like amygdalin, makes them underutilized. Therefore, the present study was focused on detoxifying Meghalayan cherry kernel using thermal, soaking and ultrasound treatments and studying their impact on the structural and thermal characteristics of protein isolate. The results showed that all three treatments significantly reduced amygdalin content, with complete detoxification achieved after 30 and 60 min at 70 °C and 60 °C, respectively, in ultrasound, and after 90 and 120 min at 70 °C and 60 °C, respectively, in soaking + thermal treatment. The detoxification treatments significantly affected the protein content and weight-loss of Meghalayan cherry kernel. Fluorescence spectroscopy and FTIR showed alterations in Meghalayan cherry kernel protein isolate (MCKPI) secondary and tertiary structure. The fluorescence intensity was observed at 340 nm for native and detoxified protein isolate, and the lowest peak for MCKPI-US depicts conformational changes. The fading of bands in SDS-PAGE confirms structural changes due to thermal and sonication effects. SEM images demonstrated that more cracks and porous structures were seen in treated MCKPI than native MCKPI. Detoxification treatment increased thermal stability, resulting in lesser weight loss and higher denaturation temperature than native MCKPI. In this study, ultrasound treatment demonstrated the most pronounced effects on the detoxification of MCKPI and its thermal and structural properties, suggesting that Meghalayan cherry kernel is one of the most promising substrates for zero-waste bioprocess development.

Effect of extrusion parameters on the interaction between rice starch and glutelin in the preparation of reconstituted rice

Reconstituted rice produced by extrusion has been attracted attention due to nutritional fortification and convenient production. Nevertheless, how to achieve desirable qualities and physicochemical properties of reconstituted rice nearly to natural rice by regulating extrusion process parameters is difficult. Herein, rice starch/glutelin mixture as raw material of reconstituted rice was extruded at varying extrusion conditions. Specific mechanical energy (SME) and sectional expansion index (SEI) dropped with rise in density (R² = 0.9117 and 0.8207). Solubility was enhanced with increase in product temperature (R² = 0.9085), color darkened and shifted to reddish and yellowish as extrusion temperature increased (R² = 0.8577). These trends were well fitted by sigmoid models. Furthermore, SME enhanced hydrophobic and electrostatic interactions between rice starch and glutelin and caused the reduction in crystallinity and thermal stability, promoting the formation of a bi-continuous matrix of protein aggregates with rice starch. The obtained results can be applied to guide the production of reconstituted rice with desirable qualities.

Physicochemical, structural, functional and flavor adsorption properties of white shrimp (Penaeus vannamei) proteins as affected by processing methods

Proteins contribute to the flavor release and texture of foods besides their nutritional attributes. However, processing affects the protein structural conformation and, thus, their functional properties. White shrimp proteins (WSP) are well known for their nutritional and functional properties and limited attention has been paid to the flavor adsorption properties of WSP. This study investigated the effects of processing methods such as microwave drying, hot air drying, roasting, and boiling on the structural (secondary and tertiary) changes and physicochemical, functional, and flavor adsorption properties of white shrimp proteins (WSP). Structural changes of WSPs were evaluated by Fourier Transform Infrared (FTIR) spectroscopy, fluorescence spectroscopy, and sulfhydryl bond content. Results revealed that the processing triggered structural changes that affected the functional properties of WSP. The highest surface hydrophobicity (H₀) of WSP in boiling (58.27 ± 1.68) and microwave drying (39.83 ± 0.83) caused increased emulsifying properties and decreased water solubility. The increased content of α-helix and random coils leads to cross-linking and protein aggregation in hot air drying (21.62 ± 0.37 %) and roasting (24.30 ± 0.24 %), which leads to low H₀ and high foaming properties. Processing has increased the flavor adsorption ability of WSP. Among all the processing methods, boiling has shown the highest flavor adsorption potential, followed by microwave drying. The findings broaden the scope of techno-functional properties of WSP in the food industry by thermal treatment modification.

Effect of Hydrothermal Treatment on the Structure and Functional Properties of Quinoa Protein Isolate

The aim of this study was to investigate the effects of hydrothermal treatment at different temperatures and times on the structure and functional properties of quinoa protein isolate (QPI). The structure of QPI was investigated by analyzing changes in the intrinsic fluorescence spectrum, ultra-violet (UV) spectrum, and Fourier transform infrared spectrum. The solubility, water/oil-holding capacity, emulsifying activity, and emulsion stability of QPI were studied, as were the particle size and the thermogravimetric properties of QPI. The results showed that the average particle size of QPI gradually increased with the increase in hydrothermal treatment time and temperature, and reached a maximum value of 121 °C for 30 min. The surface morphology also became rough and its thermal stability also increased. The endogenous fluorescence and UV spectral intensity at 280 nm decreased gradually with increasing hydrothermal treatment time and temperature, and reduced to the minimum values at 121 °C for 30 min, respectively. After hydrothermal treatment, the secondary structure of QPI tended to be disordered. The functional properties of QPI after treatment were all superior to those of the control. The results of this study might provide a basis for the processing and utilization of QPI.

Functional, thermal and structural properties of fractionated protein from waste banana peel

Defatted banana peel powder was fractionated using the Osborne method to extract albumin, globulin, prolamin, and glutelin for physicochemical and functional characterization. The total recovery of protein was ∼89.76%. Albumin was the dominant one in terms of yield (62.4%) and protein content (65.15%) among all the fractions. The mean diameter of albumin (635.05 µm) and glutelin (642.62 µm) were significantly smaller than globulin (726.81 µm) and prolamin (986.45 µm). The highest water (1.86 ± 0.12 g/g), oil (1.97 ± 0.12 g/g) holding capacity, and emulsion capacity (59.27 ± 1.25%) were found for the albumin fraction. In contrast, the glutelin fraction showed the highest foaming capacity (19.13 ± 0.41%) and dispersibility (951.55 ± 3.83 g/kg). The denaturation temperature of protein fractions was found in the range of 30.31-82.08 °C. FTIR confirmed low carbohydrates and protein richness of albumin fraction. XRD revealed the crystalline nature of albumin (65%) and the amorphous nature of other fractions (41-45%). The morphology of all fractions was different, which influenced the functional characteristics.

Effect of Phosphorylation on the Structure and Emulsification Properties of Different Fish Scale Gelatins

This study aimed to investigate the effect of phosphorylation on the structure and emulsification of Coregonus peled, Esox lucius and Grass carp scale gelatin. Fourier transform infrared spectroscopy (FTIR) and endogenous fluorescence spectra showed that the structures of the three fish scale gelatins changed. Additionally, the surface hydrophobicity index of the three fish scale gelatins increased by 36.72, 31.42 and 111.67, respectively, after 1 h of phosphorylation, and the surface tension decreased by 17.27, 32.58 and 18.7 mN/m, respectively. The emulsification activity index increased by 115.86, 155.22 and 45.52 m²/g, and the emulsification stability index increased by 98.37, 256.77 and 169.61 min, respectively. The structure of fish scale gelatin changed after phosphorylation, which resulted in the improvement of emulsification. This work will provide useful information to understand the relationship between the structure and function of gelatin.

Wheat gluten proteins phosphorylated with sodium tripolyphosphate: Changes in structure to improve functional properties for expanding applications

Poor solubility of wheat gluten proteins (WG) has negative impact on functional attributes such as gelation and emulsification, which limits it use in the food industry. In this study, WG underwent different degrees of phosphorylation using sodium tripolyphosphate (STP). Phosphoric acid groups were successfully incorporated in the WG via covalent bonding (C–N–P and C–O–P) involving hydroxyl and primary amino groups from WG. The introduction of phosphoric acid groups increased the negative charge of phosphorylation-WG, which caused the enhancement of electrostatic repulsion between proteins and reduced the droplet size in emulsions, thereby allowing proteins to be more efficiently dispersed in the solution system. The change of structure induced with phosphorylation improved hydration of protein, making the WG with higher solubility, thereby resulting in the improvement of its emulsification, foaming, thermal stability, and rheological properties. Therefore, WG can be modified by phosphorylation which caused an overall improvement of functional properties, thus facilitating the expansion of WG applications.

•

Functional properties of WG were enhanced with phosphorylation (PP).

•

The P2p at 133.1 eV and the bonds of C–O–P and C–N–P were found in PP-WG.

•

Greater ζ-potential, solubility, viscosity, foaming in PP- WG.

•

Phosphorylation increased WG thermal stability and gel properties.

The Effect of Salt on the Gelling Properties and Protein Phosphorylation of Surimi-Crabmeat Mixed Gels

The effects of different salt additions (1.0%, 1.5%, 2.0%, 2.5%, 3.0%, and 3.5%) on the gelling properties and protein phosphorylation of the mixed gels (MG) formed by silver carp (Hypophthalmichthys molitrix) surimi with 10% crabmeat were investigated. The MG's breaking force, deformation, gel strength, and water-holding capacity (WHC) increased as the salt concentration increased. The intrinsic fluorescence intensity of the samples initially decreased and then increased, reaching the lowest when the NaCl concentration was 2.5%. The result of SDS-polyacrylamide gel electrophoresis indicated that large aggregates were formed by protein-protein interaction in the MG containing 2.5% or 3.0% NaCl, decreasing the protein band intensity. It was also found that with the addition of NaCl, the phosphorus content initially increased and then decreased, reaching the maximum when the NaCl concentration was 2% or 2.5%, which was similar to the changing trend of actin band intensity reported in the results of Western blot. These results revealed that the amount of salt used had a significant effect on the degree of phosphorylation of the MG protein. The increase in phosphorylation was linked to improved gelling properties, which could lead to new ideas for manufacturing low-salt surimi products in the future.

Dual-frequency multi-angle ultrasonic processing technology and its real-time monitoring on physicochemical properties of raw soymilk and soybean protein

To improve the soybean protein content (SPC), flavor and quality of soymilk, the effects of dual-frequency ultrasound at different angles (40 + 20 kHz 0°, 40 + 20 kHz 30°, 40 + 20 kHz 45°) on physicochemical properties and soybean protein (SP) structure of raw soymilk were mainly studied and compared with the conventional single-frequency (40 kHz, 20 kHz) ultrasound. Furthermore, the intensity of the ultrasonic field in real-time was monitored via the oscilloscope and spectrum analyzer. The results showed that 40 + 20 kHz 45° treatment significantly increased SPC. The ultrasonic field intensity of 40 + 20 kHz 0° treatment was the largest (8.727 × 104 W/m2) and its distribution was the most uniform. The emulsifying stability of SP reached the peak value (233.80 min), and SP also had the largest particle size and excellent thermal stability. The protein solubility of 40 + 20 kHz 30° treatment attained peak value of 87.09%. 20 kHz treatment significantly affected the flavor of okara. The whiteness and brightness of raw soymilk treated with 40 kHz were the highest and the system was stable. Hence, the action mode of ultrasonic technology can be deeply explored and the feasibility for improving the quality of soymilk can be achieved.

Emulsion gels stabilized by soybean protein isolate and pectin: Effects of high intensity ultrasound on the gel properties, stability and β-carotene digestive characteristics

In this study, soybean protein isolate (SPI) and pectin emulsion gels were prepared by thermal induction, and the effects of high intensity ultrasound (HIU) at various powers (0, 150, 300, 450 and 600 W) on the structure, gel properties and stability of emulsion gels were investigated. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) showed that the interaction between SPI and pectin was enhanced and the crystallinity of the emulsion gels was changed due to the HIU treatment. Confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) observations revealed that the particle size of the emulsion gels was decreased significantly by HIU treatment. The emulsion gel structure became more uniform and denser, which was conducive to storage stability. In addition, according to the low field nuclear magnetic resonance (LF-NMR) analysis, HIU treatment had no obvious impact on the content of bound water as the power increased to 450 W, while the content of free water decreased gradually and became immobilized water, which indicated that the water holding capacity of the emulsion gels was enhanced. Compared with untreated emulsion gel, differential scanning calorimetry (DSC) analysis showed that the denaturation temperature reached 131.9 ℃ from 128.2 ℃ when treated at 450 W. The chemical stability and bioaccessibility of β-carotene in the emulsion gels were improved significantly after HIU treatment during simulated in vitro digestion.

Aqueous enzymatic extraction of peanut oil body and protein and evaluation of its physicochemical and functional properties

Aqueous enzymatic extraction (AEE) is a new technology for extracting vegetable oil body which has the advantages of low energy consumption, product safety, mild reaction conditions, and simultaneous separation of oil and protein. Among the enzymes tested in the present work, Viscozyme L (compound plant hydrolase) exhibited the highest extraction activity during peanut oil extraction. Extraction was optimized using response surface methodology, and optimal conditions were enzymatic temperature 51.5 °C, material-to-liquid ratio 1:3.5, enzymatic concentration 1.5%, and enzymatic time 90 min, yielding total oil body and protein of 93.67 ± 0.59% and 76.84 ± 0.68%, respectively. The fatty acid composition and content, and various quality indicators were not significantly different from those of cold-pressed oil, hence peanut oil produced by AEE met the same standards as cold-pressed first-grade peanut oil. Additionally, the functional properties of peanut protein produced by AEE were superior to those of commercially available peanut protein.

Covalent modification by phenolic extract improves the structural properties and antioxidant activities of the protein isolate from Cinnamomum camphora seed kernel

In this study, protein isolate (PI) and purified phenolic extract (PPE) were prepared from Cinnamomum camphora seed kernel (CCSK). The effects of covalent modification of PI by PPE at different concentrations (1, 2, 3, 4 and 5%, w/w) were investigated with respect to structural properties and antioxidant activities of protein. Fifteen bioactive compounds in PPE were tentatively identified by UPLC-ESI-MSⁿ. With the increase of PPE concentration, the turbidity, covalent binding rate, phenolic content and color intensity of the PI-PPE complexes were gradually increased. Fourier transform infrared spectroscopy and circular dichroism spectroscopy analysis showed that the secondary and tertiary structures of the complexes were changed and became greater order than PI. Furthermore, the complexes exhibited stronger thermal stability and antioxidant activities than those of PI. These results suggested that the protein-phenolic covalent complexes obtained from CCSK may have great potential to be used in food formulations as functional ingredients.

Effect of succinylation on the secondary structures, surface, and thermal properties of date palm pollen protein concentrate

The present study was attempted to investigate the effect of succinylation, as chemical modification, on the functionality of male date palm pollen protein concentrate (MDPPPC). Succinylation was applied at two levels, 4 and 8 mol of succinic acid per mole of lysine. 4 M and 8 M were compared to the native MDPPPC. Findings proved that succinylation improved the surface properties of pollen protein including solubility and surfactant activity. Increased solubility of succinylated MDPPPC has been noticed especially in pH superior to pHi. The results from the differential scanning calorimetry showed a significant decrease (P < 0.05) of the denaturation temperature and the heat enthalpy for succinylated MDPPPC. β turn of succinylated MDPPPC increased significantly (P < 0.05) at the expense of β sheet indicating that the protein gained more mobility after succinylation which explains the enhancement of the functional properties and promotes the use of succinylated protein as a techno-functional ingredient.

Quartz crystal microbalance sensor based on 11-mercaptoundecanoic acid self-assembly and amidated nano-titanium film for selective and ultrafast detection of phosphoproteins in food

A novel quartz crystal microbalance (QCM) sensor for trace-phosphoprotein ultrafast detection was constructed based on the bridge interactions between the NH₂-TiO₂ sites enriched on Au-electrode and phosphate groups. Herein, 11-mercaptoundecanoic acid (MUA) modified by Au-S bond acted as carrier for immobilizing NH₂-TiO₂. Functionalized NH₂-TiO₂ to absorb phosphoproteins. Under the optimal conditions, the proposed sensor showed a linear frequency shift to the concentration of α-casein ranging from 1.0 × 10^-3 to 1.0 mg mL^-1 with a low detection limit of 5.3 × 10^-6 mg mL^-1 (S/N = 3), and the limit of quantitation was 0.001 mg mL^-1. Compared with traditional Ti⁴⁺-IMAC/MOAC-system, the analysis process of NH₂-TiO₂/MUA/AuE-QCM sensor was simpler and faster which could complete within 5 min. Additionally, the constructed biosensor was successfully used for the non-fat milk and chicken egg white. This proposed sensor presents a great prospective strategy for the evaluation of the nutrition in different foods.

Determination of Trace Phosphoprotein in Food Based on Fluorescent Probe-Triggered Target-Induced Quench by Electrochemiluminescence

Evaluation of the nutrition and determination of phosphoproteins is of great importance in different foods as aberrant phosphorylation changes many biological processes and can relate to health conditions. In this study, an ultrafast (5 min) and sensitive electrochemiluminescence (ECL) sensor was innovatively fabricated for the determination of phosphoproteins in foods on the basis of fluorescent probe NH₂-TiO₂/upconversion nanomaterials (UCNPs). Impressively, the ECL intensity of NH₂-TiO₂/UCNPs-rGO/GCE was remarkably enhanced by 29 times. Furthermore, the photoactive NH₂-TiO₂ layer provided not only specific selectivity but also a large surface area as well as an unprecedented photocatalytic activity for the NH₂-TiO₂/UCNPs-rGO/GCE ECL sensor (TIECLS), which could serve as an identification element for trace phosphoproteins. Under optimal conditions, the TIECLS achieved a relatively low detection limit of 9.2 × 10^-5 mg/mL (S/N = 3). Practical application of this TIECLS was carried out in different food samples with satisfying results, which were validated by laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS).

Influence of processing and pH on amino acid profile, morphology, electrophoretic pattern, bioactive potential and functional characteristics of alfalfa protein isolates

Protein isolates were prepared from wet heat processed (APIp) and unprocessed alfalfa seeds (APIc) and characterized for composition and functionality at different pH. APIc and APIp exhibited high content of all the essential amino acids. Antinutrient content of APIp was lower in comparison to APIc and marked reduction in the trypsin inhibitor (85.97%) and lectin activity (100%) was observed. Processing did not cause much reduction of bioactive constituents and antioxidant activity of APIp. Alfalfa protein isolates exhibited complex polypeptide banding ranging from molecular weight of 11-75 kDa. APIp exhibited change in the conformation of protein discerned as alteration in interrelated nuances of ATR-FTIR spectra, XRD-pattern, morphology, charge on proteins and reduced solubility in comparison to APIc due to processing. APIp exhibited marked improvement in the functional properties in comparison to APIc discerned as improved hydration, surface active and gelation properties. Highest hydration and surface active properties were exhibited at pH 9.0, even though APIp at pH 7.0 showed fairly similar functional properties as APIc and APIp at pH 9.0. APIp exhibited reduced least gelation concentration in comparison to APIc at pH 7.0 and also engendered gelation at pH 4.0 and 9.0 contrary to APIc.

Study on Extraction of Peanut Protein and Oil Bodies by Aqueous Enzymatic Extraction and Characterization of Protein

Cell wall degrading enzymes break down the cell wall by degrading the main cell wall components and destroying structure of the cell wall without influencing the protein. Effects of various enzymes (Viscozyme® L, cellulase, hemicellulase, and pectinase) on the molecular weight distribution of peanut protein and yield of peanut protein and oil bodies during an aqueous enzymatic extraction process were investigated in this study. The molecular weight distribution of peanut protein was not changed, and Viscozyme® L was selected to assist peanut protein and oil bodies extraction by the aqueous extraction process. The aqueous enzymatic extraction process was optimized by a signal factor experiment and response surface methodology, and the optimal condition was enzyme hydrolysis temperature of 52°C, solid-liquid ratio of 1 : 4, enzyme concentration of 1.35%, and enzyme hydrolysis time of 90 min. A peanut protein yield of 78.60% and oil bodies yield of 48.44% were achieved under the optimal condition. Compared with commercial peanut protein powder (CPPP), the solubility and foaming properties of peanut protein powder obtained by aqueous enzymatic extraction (AEEPPP) were a little lower. However, the functional properties of foam stability, emulsifying activity, emulsifying stability, water holding capacity, and oil holding capacity of AEEPPP were better than that of CPPP.

Functional properties of Grass pea protein concentrates prepared using various precipitation methods

Pulses are an affordable source of proteins, starch, lipids, minerals and high value nutritional sources. This study was conducted to evaluate relationship between protein functional properties and their preparation methods. Therefore, the functional properties of Grass pea protein concentrates (GPPC) prepared using isoelectric precipitation (IE), salt extraction (SE) and ultrafiltration-diafiltration methods (UF/D) were determined. The GPP processed by those three precipitation methods contained all of the amino acids which aspartic acid and glutamic acid were dominate amino acids followed by arginine and leucine. However, methionine and tryptophan were limited amino acids. Water binding capacity was in following order: UF/D-GPPC > SE-GPPC > IE-GPPC. Meanwhile, highest value of oil binding capacity belonged to UF/D-GPPC. GPPC prepared using UF/D method had highest solubility. In term of interfacial tension, it was revealed that the interfacial tension of all isolates did not significantly reduced (P > 0/05). Net negative zeta potential with values was observed which IE-GPPC had highest surface charge followed by UF/D-GPPC and SE-GPPC, respectively. In terms of surface hydrophobicity, it was altered in the following order: IE-GPPC > SE-GPPC > UF/D-GPPC. It was observed that foaming capacity ranged between 85.06 and 89.78% and foaming stability ranged between 77.34 and 84.35%. Emulsifying capacity, emulsifying activity index and emulsifying stability index ranged between 105.06-109.78%, 31.09-36.29 m²/g and 12.90-18.86 min respectively. Evaluation of least gelling concentration showed that UF/D-GPPC were capable to form firm gel at low concentration (10% W/V). The functional properties of proteins are influenced by their extraction technique and can be achieve maximum functional characteristics by selecting appropriate extraction method. The results indicated the technological potential of GPP for health-promoting food formulations.