Adsorption of nisin and pediocin on nanoclays

Preparation and characterization of nisin-loaded chitosan nanoparticles functionalized with DNase I for the removal of Listeria monocytogenes biofilms

Listeria monocytogenes biofilms represent a continuous source of contamination, leading to serious food safety concerns and economic losses. This study aims to develop novel nisin-loaded chitosan nanoparticles (CSNPs) functionalized with DNase I and evaluate its antibiofilm activity against L. monocytogenes on food contact surfaces. Nisin-loaded CSNPs (CS-N) were first prepared by ionic cross-linking, and DNase I was covalently grafted on the surface (DNase-CS-N). The NPs were subsequently characterized by Zetasizer Nano, transmission electron microscopy, Fourier transform infrared (FT-IR), and X-ray diffraction (XRD). The antibiofilm activity of NPs was evaluated against L. monocytogenes on polyurethane (PU). The DNase-CS-N was fabricated and characterized with quality attributes (particle size-427.0 ± 15.1 nm, polydispersity [PDI]-0.114 ± 0.034, zeta potential-+52.5 ± 0.2 mV, encapsulation efficiency-46.5% ± 3.6%, DNase conjugate rate-70.4% ± 0.2). FT-IR and XRD verified the loading of nisin and binding of DNase I with chitosan. The DNase-CS-N caused a 3 log colony-forming unit (CFU)/cm2 reduction of L. monocytogenes biofilm cells, significantly higher than those in CSNPs (1.4 log), CS-N (1.8 log), and CS-N in combination with DNase I (2.2 log) treatment groups. In conclusion, nisin-loaded CSNPs functionalized with DNase I were successfully prepared and characterized with smooth surface and nearly spherical shape, high surface positive charge, and good stability, which is effective to eradicate L. monocytogenes biofilm cells on food contact surfaces, exhibiting great potential as antibiofilm agents in food industry. PRACTICAL APPLICATION: Listeria monocytogenes biofilms are a common safety hazard in food processing. In this study, novel nanoparticles were successfully constructed and are expected to be a promising antibiofilm agent in the food industry.

Highly active nisin coated polycaprolactone electrospun fibers against both Staphylococcus aureus and Pseudomonas aeruginosa

In this study, a wound dressing of electrospun polycaprolactone (PCL) fibers incorporating the antimicrobial peptide (AMP) nisin was fabricated. Nisin was physically adsorbed to the PCL fibers and tested for antibacterial activity against both Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). The PCL fibers had an average diameter of 1.16 μm ± 0.42 μm and no significant change in diameter occurred after nisin adsorption. X-ray photoelectron spectroscopy (XPS) analysis of the fibers detected nitrogen indicative of adsorbed nisin and the signal was used to quantify the levels of coverage on the fiber surfaces. In vitro nisin release studies showed a burst release profile with 80 % of the nisin being released from the fibers within 30 min. Air plasma pre-treatment of the PCL fibers to render them hydrophilic improved nisin loading and release. Antibacterial testing was performed using minimum inhibitory concentration (MIC) and surface attachment assays. The released nisin remained active against both Gram positive S. aureus and Gram negative P. aeruginosa, which has previously been difficult to achieve with single polymer fiber systems. Mammalian cell culture of the nisin coated fibers with L-929 mouse fibroblasts and human epidermal keratinocytes (HEKa) showed that the nisin did not have a significant effect on the biocompatibility of the PCL fibers. The results presented here demonstrate that the physical adsorption, which is a post-treatment, overcomes the potential limitations of harsh chemicals and fabrication conditions of electrospinning from organic solvents and provides a drug loading system having effective antibacterial properties in wound dressings.

Investigation of herbicide sorption-desorption using pristine and organoclays to explore the potential carriers for controlled release formulation

Injudicious application of available commercial herbicide formulations leads to water, air and soil contamination, which adversely affect the environment, ecosystems and living organisms. Controlled release formulation (CRFs) could be an effective way to reduce the problems associated with commercially available herbicides. Organo-montmorillonites are prominent carrier materials for synthesising CRFs of commercial herbicides. Quaternary amine and organosilane functionalised organo-montmorillonite and pristine montmorillonite were used to investigate their potential as suitable carriers for CRFs in herbicide delivery systems. The experiment involved a batch adsorption process with successive dilution method. Results revealed that pristine montmorillonite is not a suitable carrier for CRFs of 2,4-D due to its low adsorption capacity and hydrophilic nature. Conversely, octadecylamine (ODA) and ODA-aminopropyltriethoxysilane (APTES) functionalised montmorillonite has better adsorption capacities. Adsorption of 2,4-D onto both organoclays is higher at pH.3 (232.58% for MMT1 and 161.29% for MMT2) compared to higher pH until pH.7 (49.75% for MMT1 and 68.49% for MMT2). Integrated structural characterisation studies confirmed the presence of 2,4-D on the layered organoclays. The Freundlich adsorption isotherm model fitted best to the experimental data, which revealed an energetically heterogeneous surface of the experimental organoclays, and adsorption which specifically involved chemisorption. The cumulative desorption percentages of adsorbed 2,4-D from MMT1_{(2,4-D loaded)} and MMT2_{(2,4-D loaded)} after seven desorption cycles were 65.53% and 51.45%, respectively. This outcome indicates: firstly, both organoclays are potential carrier materials for CRFs of 2,4-D; secondly, they have the ability to reduce the instantaneous release of 2,4-D immediately after application; and thirdly, eco-toxicity is greatly diminished.

Antimicrobial Active Packaging Containing Nisin for Preservation of Products of Animal Origin: An Overview

The preservation of food represents one of the greatest challenges in the food industry. Active packaging materials are obtained through the incorporation of antimicrobial and/or antioxidant compounds in order to improve their functionality. Further, these materials are used for food packaging applications for shelf-life extension and fulfilling consumer demands for minimal processed foods with great quality and safety. The incorporation of antimicrobial peptides, such as nisin, has been studied lately, with a great interest applied to the food industry. Antimicrobials can be incorporated in various matrices such as nanofibers, nanoemulsions, nanoliposomes, or nanoparticles, which are further used for packaging. Despite the widespread application of nisin as an antimicrobial by directly incorporating it into various foods, the use of nisin by incorporating it into food packaging materials is researched at a much smaller scale. The researchers in this field are still in full development, being specific to the type of product studied. The purpose of this study was to present recent results obtained as a result of using nisin as an antimicrobial agent in food packaging materials, with a focus on applications on products of animal origin. The findings showed that nisin incorporated in packaging materials led to a significant reduction in the bacterial load (the total viable count or inoculated strains), maintained product attributes (physical, chemical, and sensorial), and prolonged their shelf-life.

Antimicrobial peptide-based materials: opportunities and challenges

The multifunctional properties of antimicrobial peptides (AMPs) make them attractive candidates for the treatment of various diseases. AMPs are considered alternatives to antibiotics due to the rising number of multidrug-resistant...

Structured silica materials as innovative delivery systems for the bacteriocin nisin

Nisin was encapsulated in silica through sol-gel process by acid-catalyzed routes. The silica xerogels were characterized through nitrogen adsorption isotherms, small-angle X-ray scattering (SAXS), zeta potential, X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), and Fourier transform infrared spectroscopy (FTIR). SAXS results showed that the particle diameters in a second level of aggregation varied from 4.78 to 5.86 nm. Zeta potential of silica particles were from -9.6 to -25.3 mV, while the surface area and pore diameters ranged from 216 to 598 m² g^-1 and 2.53 to 2.90 nm, respectively, indicating the formation of mesoporous nanostructures. Nisin retained the antimicrobial activity against all microorganisms tested after encapsulation in silica materials. These novel silica-based structures can be valuable carriers for nisin delivery in food systems.

Research of mechanisms of transformation and removal of antibiotics from wine by sorbents of different nature

On the basis of own research, the authors experimentally confirmed the reliability of the hypothesis expressed in the scientific literature about the possibility of effective removal of nisin and natamycin from wines and wine materials. New knowledge has been obtained about the possible mechanisms of sorption of nisin and natamycin through the use of sorbents of various nature. Comparative experimental data on the interaction of sorbents with antibiotics in wines are presented. In this work, experimental data are presented that indicate different efficiency of antibiotic removal during wine processing, which is due to the structure and properties of sorbents. It has been shown that the sorption capacity of sorbents for natamycin and nisin decreases in the series: activated carbon, bentonite, and colloidal silicon dioxide. Mathematical models have been obtained for decontamination of antibiotics from wine production using sorbents of various nature.

Nanomedicines for the Delivery of Antimicrobial Peptides (AMPs)

Microbial infections are still among the major public health concerns since several yeasts and fungi, and other pathogenic microorganisms, are responsible for continuous growth of infections and drug resistance against bacteria. Antimicrobial resistance rate is fostering the need to develop new strategies against drug-resistant superbugs. Antimicrobial peptides (AMPs) are small peptide-based molecules of 5–100 amino acids in length, with potent and broad-spectrum antimicrobial properties. They are part of the innate immune system, which can represent a minimal risk of resistance development. These characteristics contribute to the description of these molecules as promising new molecules in the development of new antimicrobial drugs. However, efforts in developing new medicines have not resulted in any decrease of drug resistance yet. Thus, a technological approach on improving existing drugs is gaining special interest. Nanomedicine provides easy access to innovative carriers, which ultimately enable the design and development of targeted delivery systems of the most efficient drugs with increased efficacy and reduced toxicity. Based on performance, successful experiments, and considerable market prospects, nanotechnology will undoubtedly lead a breakthrough in biomedical field also for infectious diseases, as there are several nanotechnological approaches that exhibit important roles in restoring antibiotic activity against resistant bacteria.

Intercalation of cationic peptides within Laponite layered clay minerals in aqueous suspensions: The effect of stoichiometry and charge distance matching

Clays can be synthesised to have specific functional properties, which have been exploited in a range of industrial processes. A key characteristic of clay is the presence of a negatively charged surface, surrounded by an oppositely charged rim. Because of that, clays are able to sequester cationic compounds resulting in the formation of ordered layered structures, known as tactoids. Recent research has highlighted the possibility of utilising clay as a drug delivery compound for cationic peptides. Here, we investigate the process of intercalation by using the highly cationic peptide deca-arginine, and the synthetic clay Laponite, in aqueous suspensions with 2.5 wt% Laponite, and varying peptide concentrations. Small-angle X-ray scattering experiments show that tactoids are formed as a function of deca-arginine concentration in the dispersion, and for an excess of peptide, i.e. above a matched charge-ratio between the peptide and clay, the growth of the tactoids is limited, resulting in tactoidal dissolution. Zeta-potential measurements confirm that the observed dissolution is caused by overcharging of the platelets. By employing coarse-grained molecular dynamics simulations based on the continuum model, we are able to predict the tactoid formation, the growth, and the dissolution, in agreement with experimental results. We propose that the present simulation method can be a useful tool to tune peptide and clay characteristics to optimise and determine the extent of intercalation by cationic peptides of therapeutic interest.

Effects of chitosan oligosaccharide-nisin conjugates formed by Maillard reaction on the intestinal microbiota of high-fat diet-induced obesity mice model

Objectives

The goal of this study was to evaluate the modulatory effect of chitosan oligosaccharide-nisin conjugate (CON-C) on intestinal microbiota of human flora-associated (HFA) mice and also reveal its effect towards the high-fat diet (HFD)-induced obesity. Both Chitosan oligosaccharides and nisin showed great potential in modulating the intestinal microbiota, so it is worth to explore whether the modulation effect of chitosan oligosaccharide could be improved by covalently binding with nisin.

Materials and Methods

CON-C was prepared by heating the mixed solution of chitosan oligosaccharide and nisin at 80°C and pH 2.0 for 24h. The structure of CON-C were analyzed by Fourier transform-infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The CON-C’s anti-obesity effect and modulatory effect toward intestinal microbiota were analyzed using human flora-associated (HFA) mice model.

Results

CON-C could alleviated HFD-induced gut dysbiosis, by significantly decreasing the numbers of Bifidobacterium and Lactobacillus/Enterococcus spp., and increasing the numbers of Bacteroides–Prevotella and Clostridium groups. CON-C could also enriched the most differentially expressed genes through KEGG pathways of biosynthesis of amino acids, two-component system, and ATP binding cassette (ABC) transporters.

Conclusions

The improved therapeutic effect of CON-C against HFD-induced obesity has been approved, and hence, CON-C has a great potential to be utilized as a functional food ingredient in reducing body weight.

Antimicrobial Applications of Clay Nanotube-Based Composites

Halloysite nanotubes with different outer surface/inner lumen chemistry (SiO₂/Al₂O₃) are natural objects with a 50 nm diameter hollow cylindrical structure, which are able to carry functional compounds both inside and outside. They are promising for biological applications where their drug loading capacity combined with a low toxicity ensures the safe interaction of these nanomaterials with living cells. In this paper, the antimicrobial properties of the clay nanotube-based composites are reviewed, including applications in microbe-resistant biocidal textile, paints, filters, and medical formulations (wound dressings, drug delivery systems, antiseptic sprays, and tissue engineering scaffolds). Though halloysite-based antimicrobial materials have been widely investigated, their application in medicine needs clinical studies. This review suggests the scalable antimicrobial nano/micro composites based on natural tubule clays and outlines research and development perspectives in the field.

Controlled release of nisin from Neusilin particles to enhance food safety of sour curd cheese

Nisin is frequently added as food additive to soft cheese to increase food safety against foodborne pathogens like Listeria monocytogenes. The goal of this study was the extension of the antimicrobial activity of nisin in sour curd cheese (SCC) by self-releasing adsorbed nisin from Neusilin UFL2 over production-based pH shift. First, the antimicrobial activity of nisin adsorbed to Neusilin UFL2 (UFL2-N) and free nisin was investigated in BHI broth at a pH range from 7.5 to 4.5 for each of six L. monocytogenes field isolates. UFL2-N showed similar minimal inhibition concentration to L. monocytogenes over time as free nisin. Distribution of nebulized, fluorescence-labelled UFL2 was homogenous on SCC surface. Thereafter, SCC surface was inoculated with L. monocytogenes and 0.004, 0.013, 0.026, and 0.132 mg mL-1 UFL2-N or free nisin. In SCC, L. monocytogenes was below quantification limit at 0.132 mg mL-1 UFL2-N or free nisin after 2 days of ripening. Collectively, UFL2-N enabled a slow release and antilisterial activity in vitro as well as in cheese manufacturing.

Adsorption of plantaricin Q7 on montmorillonite and application in feedback regulation of plantaricin Q7 synthesis by Lactobacillus plantarum Q7

Kieselguhr, bentonite, and montmorillonite were investigated as potential carriers of plantaricin Q7. Highest level of adsorption of plantaricin Q7 was obtained with montmorillonite. Meanwhile, visible inhibition zones were observed against Listeria monocytogenes for montmorillonite adsorbed with plantaricin Q7. Adsorption kinetics showed that the adsorption behaviour followed the pseudo-first-order and Weber's intra-particle diffusion models, suggesting two steps had taken place during the adsorption process. X-ray diffraction assays revealed that plantaricin Q7 was intercalated into the interlayer space of montmorillonites. Electrostatic, hydrogen bonding and hydrophobic interactions proved to play important roles in the mechanisms of interaction between montmorillonite and plantaricin Q7, as shown by infrared spectroscopy analysis. In addition, plantaricin Q7 production was inhibited by feedback regulation with its high concentrations. In order to remove product feedback inhibition in plantaricin Q7 production, a strategy was implemented for its adsorption onto montmorillonite during fermentation. The final plantaricin Q7 output reached 3713.40 IU/mL during fermentation using montmorillonite to adsorb plantaricin Q7, 41.61% higher than that of non- montmorillonite. These results indicate that montmorillonites are suitable carriers for plantaricin Q7 adsorption, and the adsorption of plantaricin Q7 onto montmorillonite during fermentation could be a good method to increase final plantaricin Q7 production.

Mining the tree of life: Host defense peptides as antiviral therapeutics

Discovering new therapeutics for human viral diseases is important for combatting emerging infectious viruses and omnipresent circulating viruses as well as those that can become resistant to the drugs we currently have available. The innate host defense peptide (HDP) repertoire present in animals is a wealth of potential antimicrobial agents that could be mined to meet these needs. While much of the body of research regarding HDPs is in the context of bacteria, there is increasing evidence that they can be an effective source for antivirals. Peptides can be identified in a number of ways, including eco-conservation-minded approaches. Those shown to have antiviral properties can be modified to exhibit desired properties as the relationship between structure and function is elucidated and then developed into therapeutics for human use. This review looks at the discovery and therapeutic potential of HDPs for human viral infections.

Incorporation of antimicrobial peptides on electrospun nanofibres for biomedical applications

The aim of this work was to immobilize antimicrobial peptides onto a fibrous scaffold to create functional wound dressings. The scaffold was produced by electrospinning from a mixture of the water soluble polymers poly(acrylic acid) and poly(vinyl alcohol) and subsequently heat cured at 140 °C to produce a stable material with fibre diameter below micron size. The peptides were incorporated into the negatively charged scaffold by electrostatic interaction. The best results were obtained for lysozyme impregnated at pH 7, which rendered a loading of up to 3.0 × 10⁻⁴ mmol mg⁻¹. The dressings were characterized using SEM, ATR-FTIR, elemental analysis, ζ-potential and confocal microscopy using fluorescamine as an amine-reactive probe. The dressings preserved their fibrous structure after impregnation and peptides were distributed homogeneously throughout the fibrous network. The antibacterial activity was assessed by solid agar diffusion tests and growth inhibition in liquid cultures using Staphylococcus aureus, a pathogenic strain generally found in infected wounds. The antibacterial activity caused clear halo inhibition zones for lysozyme-loaded dressings and a 4-fold decrease in S. aureus viable colonies after two weeks of contact of dressings with bacterial liquid cultures. The release profile in different media showed sustained release in acidic environments, and a rapid discharge at high pH values. The incorporation of lysozyme resulted in dressing surfaces essentially free of microbial growth after 14 days of contact with bacteria at pH 7.4 attributed to the peptide that remained attached to the dressing surface.

The aim of this work was to immobilize antimicrobial peptides onto a fibrous scaffold to create functional wound dressings.

Fabrication of biocompatible and efficient antimicrobial porous polymer surfaces by the Breath Figures approach

We designed and fabricated highly efficient and selective antibacterial substrates, i.e. surface non-cytotoxic against mammalian cells but exhibiting strong antibacterial activity. For that purpose, microporous substrates (pore sizes in the range of 3-5 μm) were fabricated using the Breath Figures approach (BFs). These substrates have additionally a defined chemical composition in the pore cavity (herein either a poly(acrylic acid) or the antimicrobial peptide Nisin) while the composition of the rest of the surface is identical to the polymer matrix. As a result, considering the differences in size of bacteria (1-4 μm) in comparison to mammalian cells (above 10 µm) the bacteria were able to enter in contact with the inner part of the pores where the antimicrobial functionality has been placed. On the opposite, mammalian cells remain in contact with the top surface thus preventing cytotoxic effects and enhancing the biocompatibility of the substrates. The resulting antimicrobial surfaces were exposed to Staphylococcus aureus as a model bacteria and murine endothelial C166-GFP cells. Superior antibacterial performance while maintaining an excellent biocompatibility was obtained by those surfaces prepared using PAA while no evidence of significant antibacterial activity was observed at those surfaces prepared using Nisin.

Application of Synthetic Layered Sodium Silicate Magadiite Nanosheets for Environmental Remediation of Methylene Blue Dye in Water

The removal of methylene blue (MB) dye from water was investigated using synthetic nano-clay magadiite (SNCM). SNCM was synthesized by a hydrothermal treatment under autogenous pressure. A rosette-shaped single mesoporous magadiite phase with 16.63 nm average crystallite size and 33 m²∙g⁻¹ Braunauer-Emmet-Teller (BET)-surface area was recorded. The adsorption results indicated the pronounced affinity of the SNCM to the MB dye molecules, which reached an adsorption uptake of 20.0 mg MB dye/g of SNCM. The elimination of MB dye by the SNCM was kinetically and thermodynamically considered; a pseudo-second-order kinetic model was attained, and its spontaneous, chemical, and endothermic nature was verified. SNCM was shown to be robust without a detectable reduction in the adsorption capacity after up to four times re-use.

Nanostructures for delivery of natural antimicrobials in food

Natural antimicrobial compounds are a topic of utmost interest in food science due to the increased demand for safe and high-quality foods with minimal processing. The use of nanostructures is an interesting alternative to protect and delivery antimicrobials in food, also providing controlled release of natural compounds such as bacteriocins and antimicrobial proteins, and also for delivery of plant derived antimicrobials. A diversity of nanostructures are capable of trapping natural antimicrobials maintaining the stability of substances that are frequently sensitive to food processing and storage conditions. This article provides an overview on natural antimicrobials incorporated in nanostructures, showing an effective antimicrobial activity on a diversity of food spoilage and pathogenic microorganisms.

Low-cost magnetic herbal biochar: characterization and application for antibiotic removal

Magnetic biochar (M-BC) was derived from herbal medicine waste, Astragalus membranaceus residue, and was used as an adsorbent for ciprofloxacin removal from aqueous solutions. The M-BC was characterized by Brunauer-Emmett-Teller surface area analyses, Fourier transform infrared spectrometry, X-ray diffraction analysis, hysteresis loops, scanning electron microscopy energy-dispersive spectrometry, and X-ray photoelectron spectroscopy. The BET surface area increased from 4.40 to 203.70 m²/g after pyrolysis/magnetic modification. Batch experiments were performed at different dosages, initial concentrations, contact times, and solution pHs. Adsorption performances were evaluated using Langmuir and Freundlich isotherm models, and the results indicated that the Langmuir model appropriately described the adsorption process. The kinetic data were better fitted by a pseudo-second-order kinetic model. The maximum ciprofloxacin removal was observed at pH 6 (adsorption capacity of 68.9 ± 3.23 mg/g). Studies demonstrated that magnetically modified biochar might be an attractive, cost-effective, and easily separated adsorbent for contaminated water. Graphical abstract.

Non-sticky and antimicrobial zwitterionic nanocomposite dressings for infected chronic wounds

Zwitterionic poly(sulfobetaine acrylamide) (pSBAA)-based nanocomposite hydrogels can have high potential for the treatment of infected chronic wounds.