A silver nanorod resonance rayleigh scattering-energy transfer analytical platform for trace tea polyphenols

A new surface molecularly imprinted polyacrylamide nanoprobe for trace Cr(VI) with RRS technique

This article was used potassium dichromate as the template molecule, silver nanoclusters as the nano matrix, acrylamide as the monomer, ethylene glycol dimethacrylate (EGDMA) as the crosslinking agent, and azodiisobutyronitrile (AIBN) as the initiator to prepare a new silver nanocluster surface MIP (AgNCs@MIP) nanoprobe for chromate. Upon addition of Cr(VI), it selectively adsorbs on the surface of AgNCs@MIP nanoprobes. The dichromate ion absorption peak at 350 nm overlaps with the AgNCs@MIP RRS peak at 370 nm, resulting in strong RRS energy transfer (RRS-ET) and a decrease in the RRS intensity. The decreased RRS intensity is directly proportional to the concentration of dichromate ions in the range of 0.0025-0.015 µmol/L, with a detection limit of 0.8 nmol/L. Therefore, a simple, fast, sensitive and selective RRS method for the determination of trace Cr(VI) in mineral water has been established, with a relative standard deviation of 9.2-9.8 % and recovery of 95.20 %-103.60 %.

A new strategy for RRS-based determination of phosphate with a bifunctional Fe3O4 magnetic nanoparticle surface molecularly imprinted polydopamine probe

In this paper, a magnetic nanoparticle surface molecularly imprinted polydopamine RRS probe Fe3O4@MIP was prepared using phosphomolybdic acid (PMo) as the template, Fe3O4 magnetic nanoparticles as the substrate and dopamine hydrochloride (PD) as the monomer and crosslinking agent for the determination of PO43-. Under acidic conditions, phosphomolybdic acid is formed by the reaction of PO43- with ammonium molybdate (MSA), which can be imprinted with the Fe3O4@MIP probe surface and reduced to phosphomolybdic blue (PMoB) by ascorbic acid (Aa). Strong resonance Rayleigh scattering energy transfer (RRS-ET) occurs between the probe and PMoB, resulting in a decrease in the RRS signal value. A new, simple and selective RRS method for the determination of PO43- in water samples was developed. The linear range of this method is 1-22.5 μmol L-1, and the detection limit (DL) is 0.49 μmol L-1. Furthermore, the magnetic enrichment ability of Fe3O4@MIP is discussed. Experimental data show that even 0.2 μmol L-1 of phosphate can be detected within a 20% error range.

A facile COF loaded-molybdate resonance Rayleigh scattering and fluorescence dimode probe for determination of trace PO43

A new covalent organic framework loaded-molybdate (COF_Mo) nanomaterial was prepared simply by solvothermal procedure and characterized by electron microscopy and molecular spectral techniques. The COF_Mo had a strong resonance Rayleigh scattering (RRS) signal at 465 nm and a fluorescence peak at 345 nm. When the PO₄^3- was added in the system, it reacted with the molybdate, which loaded on the surface of COF particles, to form stable phosphomolybdic acid occurring RRS/fluorescence-energy transfer, the RRS and fluorescence signals were decreased. The decreased RRS/fluorescence intensities were linear to the PO₄^3- concentration in the range of 0.053-3.2 nmol/L and 0.10-3.2 nmol/L, with a detection limit of 0.050 nmol/L and 0.090 nmol/L respectively. Accordingly, a new and facile RRS/fluorescence dimode method for detection of trace PO₄^3- was established, only one fluorometer was used.

A cholesterol benzoate RRS probe for the determination of trace ammonium ions

The measurement of NH₄⁺ has attracted considerable attention with the increase of NH₄⁺ emissions in sewage caused by human activities. So far, a variety of photometric and fluorescence methods for the detection of NH₄⁺ have been researched and summarized, but there is no report about the use of liquid crystals (LCs) cholesteryl benzoate (CB) as a resonance Rayleigh scattering (RRS) probe to determine ammonium ions. In the NaAc-HAc buffer solution with pH = 4.80, the yellow compounds 3,5 diacetyl-1,4 dihydrolutidine (DDL) generated by the reaction of NH₄⁺ with acetylacetone (AT) and formaldehyde (HCHO) act as the energy receiver and CB as the donor. Because the RRS spectrum of CB overlaps with the DDL absorption spectrum, resonance Rayleigh scattering energy transfer (RRS-ET) occurs. When the NH₄⁺ concentration increased, the generated DDL increased, and the RRS-ET also increased, so the RRS intensity of the system at 395 nm decreased. For this reason, a fast and sensitive CB RRS-ET method was established to apply to the detection of NH₄⁺ in water. The detection range was 1.00 × 10^-3 - 4.66 μg/mL, and the detection limit was 6.62 × 10^-3 μg/mL. Using this method to analyze and detect NH₄⁺ in environmental water samples, the precision and recovery rate were between 1.30-9.30% and 95.5-109.9%, respectively. Therefore, this method has the advantages of sensitivity and simplicity.

A resonance Rayleigh scattering and fluorescence quenching dual-channel sensor for sensitive detection of chitosan based on Eosin Y

The sensitive chitosan (CTS) detection methods based on the resonance Rayleigh scattering (RRS) quenching method and fluorescence quenching of Eosin Y were put forward. In the HAC-NaAC buffer solution, Eosin Y interacted with Triton X-100 to generate the binary complex which served as the RRS spectral probe. When CTS was interacted with the binary complex, the RRS intensity decreased with the increase of CTS. At the same time, the fluorescence intensity of Eosin Y decreased in the presence of Triton X-100, and the fluorescence intensity of "Eosin Y+Triton X-100" system further decreased when CTS was added. So it was further proved that there was a forming complex in "Eosin Y+Triton X100+CTS" system. The interaction was characterized by zeta potential, RRS, fluorescence spectrum, and UV-Vis spectroscopy. Under optimal conditions, there was a good linear relationship between the RRS decreased intensity (ΔI) and the concentration of CTS in the range of 0.05-1.30 μg/mL, with a regression equation of ΔI = 1325c + 73.66 and correlation coefficient (R²) of 0.9907. The detection limit was 0.0777 μg/mL. Likewise, the linear range of the fluorescence quenching was 0.03-1.30 μg/mL; the regression equation was ΔF = 1926c + 294.0 with R² = 0.9800 under fluorescence quenching. The detection limit was 0.0601 μg/mL. Therefore, the dual-channel sensor for the determination of CTS was applied to the health products, and the results were satisfactory. The t test result showed that there was no statistical difference between the two methods.

Silver nanorods induced oxidative stress and chromosomal aberrations in the Allium cepa model

The production of different size and shape silver nanoparticles (AgNPs) has increased considerably in recent years due to several commercial and biological applications. Here, rod-shaped AgNPs (SNRs) were prepared using the microwave-assisted method and characterised by ultraviolet-visible spectroscopy, and transmission electron microscopy analysis. The present study aims to investigate the cyto-genotoxic effect of various concentrations (5, 10, and 15 µM) of SNRs using Allium cepa model. As a result, concentration-dependent cyto-genotoxic effect of SNRs was observed through a decrease in the mitotic index, and an increase in the chromosomal aberrations such as chromosome break, disturbed metaphase, and anaphase bridge. To check the impact of Ag+ ions, 15 µM silver nitrate (AgNO3) was prepared and tested in all the assays. Furthermore, cell viability and different reactive oxygen species assays were performed to test the cytotoxicity evaluation of SNRs. The authors found that in all the tested assays, SNRs at high concentrations (15 µM) and AgNO3 (15 µM) were observed to cause maximal damage to the roots. Therefore, the current study implies that the cytotoxicity and genotoxicity of SNRs were dependent on the concentration of SNRs.

Application of Gelatin Decorated with Allura Red as Resonance Rayleigh Scattering Sensor to Detect Chito-Oligosaccharides

A convenient and sensitive triple-wavelength overlapping resonance Rayleigh scattering (TWO-RRS) method for the detection of chito-oligosaccharides (COS) was proposed based on enhancing the rigid surface of porous reticular spatial structure of gelatin and COS by introducing allura red AC (AR). The interaction and resultant porous reticular spatial structure were characterized with transmission electron microscopy (TEM), RRS, and UV-Vis spectroscopy. The results indicated that gelatin and COS formed porous reticular spatial structure with an average diameter of 1.5-2.0 μm, and the RRS value of COS-AR-gelatin ternary system with gelatin participation was significantly higher than that of COS-AR binary system. Under the optimal conditions, the enhanced TWO-RRS intensity of the system was linearly proportional to COS concentration in the range of 0.30-2.50 μg/mL, and the regression equation was ΔI = 4933.2c-446.21 with R2 = 0.9980. The limit of detection was 0.0478 μg/mL. So, a new method for the detection of COS was established and verified in the health products with satisfactory results.

A simple and selective resonance Rayleigh scattering-energy transfer spectral method for determination of trace neomycin sulfate using Cu2O particle as probe

The stable Cu₂O nanocubic (Cu₂ONC) sol was prepared, based on graphene oxide (GO) catalysis of glucose-Fehling's reagent reaction, and its absorption and resonance Rayleigh scattering (RRS) spectra, transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) were examined. Using the as-prepared Cu₂ONC as RRS probe, and coupling with the neomycin sulfate (NEO) complex reaction, a new, simple, sensitive and selective RRS-energy transfer (RRS-ET) method was established for detection of neomycin sulfate, with a linear range of 1.4-112μM and a detection limit of 0.4μM. The method has been applied to the detection of neomycin sulfate in samples with satisfactory results.