Benzaldehyde in cherry flavour as a precursor of benzene formation in beverages

Aroma component analysis by HS-SPME/GC-MS to characterize Lager, Ale, and sour beer styles

The world of beer is a rich tapestry woven with diverse styles, each with its unique character. Lager, known for its crispness, ferments at lower temperatures, while ale, at warmer ones, boasts a wide spectrum of aromas. Belgian beers dazzle with their complexity, from fruity Trappist ales to sour lambics. German wheat beers, like hefeweizens, charm with their effervescence and fruity undertones. India Pale Ales (IPAs) showcase a hoppy burst, while sour ales tantalize with their tanginess. Craftsmanship, history, and regional ingredients intertwine in this world of brewing, offering aficionados an array of delightful experiences. Research on craft beer aromas is limited, and molecular fingerprint could be crucial. To date, there have been no studies focused on characterizing compound profiles to differentiate beer styles. The Headspace Solid Phase Microextraction (HS-SPME) method provides a rapid and solvent-free approach to volatile compound. The present study aims to characterize the aroma profile of a wide range of beers by using HS-SPME/GC-MS technique combined with multivariate data processing. A total of 120 beer samples were collected and divided into five categories: Pilsen (n = 28); Lager (n = 23); Ale (n = 32); Sour (n = 24); and Belgian Ales (n = 13). Among the Pilsen beers, 18 unique compounds were found for beers with hop extract and hops, and 2 for beers with hop extract (Octyl acetate; and alpha-Terpineol). When comparing the remaining groups to each other, Belgian beers exhibited 5 unique compounds, and Lagers had one (nonanal). Sours and Ales did not have unique compounds but shared 2 distinct compounds with the Belgian group each. We concluded that Belgian beers are the most complex in terms of various aroma-related compounds, and that it is possible to distinguish beers that use pure hops from hop extract.

Utilizing metabolomics and network analysis to explore the effects of artificial production methods on the chemical composition and activity of agarwood

Introduction: Agarwood is a traditional aromatic southern medicine. It has a long history of being used in traditional Chinese aromatherapy to treat insomnia, anxiety and depression. Due to the scarcity of wild resources, people have planted trees successfully and begun to explore various agarwood-inducing techniques. This study comparative analysis of volatile metabolites in agarwood produced by various inducing techniques and its potential sleep-promoting, anti-anxiety and anti-depressant network pharmacological activities. Methods: A total of 23 batches of two types of agarwood were collected, one of which was produced by artificial techniques, including 6 batches of TongTi (TT) agarwood produced by "Agar-Wit" and 6 batches of HuoLao (HL) agarwood produced by "burning, chisel and drilling", while the other was collected from the wild, including 6 batches of BanTou (BT) agarwood with trunks broken due to natural or man-made factors and 5 batches of ChongLou (CL) agarwood with trunks damaged by moth worms. The study employed metabolomics combined with network analysis to compare the differences in volatile metabolites of agarwood produced by four commonly used inducing techniques, and explored their potential roles and possible action targets in promoting sleep, reducing anxiety, and alleviating depression. Results: A total of 147 volatile metabolites were detected in agarwood samples, mainly including small aromatic hydrocarbons, sesquiterpenes and 2-(2-phenylethyl) chromone and their pyrolysis products. The results showed composition of metabolites was minimally influenced by the agarwood induction method. However, their concentrations exhibited significant variations, with 17 metabolites showing major differences. The two most distinct metabolites were 6-methoxy-2-(2-phenylethyl) chromone and 6,7-dimethoxy-2-(2-phenylethyl) chromone. Among the volatile metabolites, 142 showed promising potential in treating insomnia, anxiety, and depression, implicating various biological and signaling pathways, predominantly ALB and TNF targets. The top three active metabolites identified were 2-(2-phenylethyl) chromone, 1,5-diphenylpent-1-en-3-one, and 6-methoxy-2-[2-(4'-methoxyphenyl) ethyl] chromone, with their relative content in the four types of agarwood being TT>HL>CL>BT. Conclusion: The differences in the content of 2-(2-phenylethyl) chromones suggest that they may be responsible for the varying therapeutic activities observed in different types of agarwood aromatherapy. This study offers theoretical support for the selection of agarwood in aromatherapy practices.

Developing a High-Umami, Low-Salt Soy Sauce through Accelerated Moromi Fermentation with Corynebacterium and Lactiplantibacillus Strains

The traditional fermentation process of soy sauce employs a hyperhaline model and has a long fermentation period. A hyperhaline model can improve fermentation speed, but easily leads to the contamination of miscellaneous bacteria and fermentation failure. In this study, after the conventional koji and moromi fermentation, the fermentation broth was pasteurized and diluted, and then inoculated with three selected microorganisms including Corynebacterium glutamicum, Corynebacterium ammoniagenes, and Lactiplantibacillus plantarum for secondary fermentation. During this ten-day fermentation, the pH, free amino acids, organic acids, nucleotide acids, fatty acids, and volatile compounds were analyzed. The fermentation group inoculated with C. glutamicum accumulated the high content of amino acid nitrogen of 0.92 g/100 mL and glutamic acid of 509.4 mg/100 mL. The C. ammoniagenes group and L. plantarum group were rich in nucleotide and organic acid, respectively. The fermentation group inoculated with three microorganisms exhibited the best sensory attributes, showing the potential to develop a suitable fermentation method. The brewing speed of the proposed process in this study was faster than that of the traditional method, and the umami substances could be significantly accumulated in this low-salt fermented model (7% w/v NaCl). This study provides a reference for the low-salt and rapid fermentation of seasoning.

Streamlined synthesis of iron and cobalt loaded MCM-48: High-performance heterogeneous catalysts for selective liquid-phase oxidation of toluene to benzaldehyde

Hydrothermal synthesis of MCM-48 molecular sieves featuring the incorporation of both iron and cobalt with Si/M ratios of 20, 40 and 80 (where M represents either iron or cobalt) was performed using tetraethyl orthosilicate as the silica source and cetyltrimethylammonium bromide as a template. To gain a comprehensive understanding of the synthesized materials, these were thoroughly characterized using various techniques, including XRD, XPS, UV-Vis (DRS), FT-IR, N2 adsorption-desorption analysis, SEM with EDX, TEM, TGA and NH3-TPD analysis. XRD analysis revealed the presence of well-ordered MCM-48 structure in the metal-incorporated materials, while XPS and UV-Vis DRS confirmed the successful partial incorporation of metal ions precisely in their desired tetrahedral coordination within the framework. To assess their catalytic performance, we studied the activity and selectivity of these catalysts in liquid phase oxidation of toluene using tert-butyl hydroperoxide as the oxidant. Under optimized conditions, employing a 6% (w/w) Fe-MCM-48 (40) catalyst and maintaining a toluene to oxidant molar ratio of 1:3 at 353 K in a solvent-free environment for 8 h, the oxidation reaction resulted in the formation of benzaldehyde (88.1%) as the major product and benzyl alcohol (11.9%) as the minor product.

Benzoates and in situ formed benzene in food supplements and risk assessment

Upward trend in the use of food supplements urged the assessment of their safety. Eighty-eight liquid herbal supplements collected in Novi Sad (Serbia) in 2018 (36 samples) and 2021 (52 samples) were analysed for the presence of benzoates and sorbates (HPLC-UV) and benzene (HS-GC/MS). Benzoic acid varied from 599 to 9253 mg/kg and sorbic acid between 185 and 1658 mg/kg. The acceptable daily intake of sorbic acid was not reached, but in case of benzoic acid, it was exceeded by 5.3% of the samples. The presence of benzene was confirmed in 41.2% of benzoate preserved supplements (0.9-51.7 µg/kg). Benzene exposure revealed no health concern: maximum hazard quotients ranged from 0.39% (toddlers) to 0.84% (adolescents); minimum margins of exposure were between 35,680 (adolescents) and 77,419 (toddlers); estimates of lifetime cancer risk did not reach one extra cancer case per 100 000 persons. However, measures to mitigate benzene presence in food should be considered.

Fluorosensing of benzaldehydes by CuI-graphene: A spectroscopy, thermodynamics and docking supported phenomenon

Benzaldehyde and 4-methyl benzaldehyde constitute a major part of the harmful volatile organic compounds (VOCs) found in the environment. Hence, rapid and selective detection of benzaldehyde derivatives are required to minimize the environmental degradation as well as the potential hazards on human health. In this study, the surface of the graphene nanoplatelets were functionalized with CuI nanoparticles for specific and selective detection of benzaldehyde derivatives by fluorescence spectroscopy. CuI-Gr nanoparticles exhibited higher efficiency towards the detection of benzaldehyde derivatives as compared to pristine CuI nanoparticles with detection limit (LOD) 2 ppm and 6 ppm for benzaldehyde and 4-methyl benzaldehyde respectively in aqueous medium. The LOD values for the detection of benzaldehyde and 4-methyl benzaldehyde by pristine CuI nanoparticles were poor and found to be 11 ppm and 15 ppm respectively. Fluorescence intensity of CuI-Gr nanoparticles were found to be quenched with increasing concentration (0-0.01 mg/mL) of the benzaldehyde and 4-methyl benzaldehyde. This novel graphene-based sensor was also found to be highly selective for the benzaldehyde derivatives as no changes in signal were detected in presence of other VOCs like formaldehyde and acetaldehyde.

GC-MS and GC×GC-ToF-MS analysis of roasted / broth flavors produced by Maillard reaction system of cysteine-xylose-glutamate

Maillard reaction products (MRPs) with roasted/broth flavors were prepared and analyzed for the resulting flavor differences. The identification of volatile compounds in MRPs was carried out by GC-MS and GC × GC-ToF-MS. A total of 88 compounds were identified by GC-MS; 130 compounds were identified by GC × GC-ToF-MS, especially acids and ketones were identified. Principal component analysis (PCA) was used to visualize the volatile compounds, and the roasted/broth flavors were differentiated. The contents and types of pyrazines were more in roasted flavors; thiol sulfides and thiophenes were more in broth flavors. All in all, the differences in volatile compounds producing roasted/broth flavors were studied through the cysteine-xylose-glutamate Maillard reaction system, which provided a theoretical basis for the future use of Maillard reaction to simulate meat flavor.

Comparative Study of the Petal Structure and Fragrance Components of the Nymphaea hybrid, a Precious Water Lily

Nymphaea hybrid, a precious water lily, is a widely-cultivated aquatic flower with high ornamental, economic, medicinal, and ecological value; it blooms recurrently and emits a strong fragrance. In the present study, in order to understand the volatile components of N. hybrid and its relationship with petals structure characteristics, the morphologies and anatomical structures of the flower petals of N. hybrid were investigated, and volatile compounds emitted from the petals were identified. Scanning and transmission electron microscopy were used to describe petal structures, and the volatile constituents were collected using headspace solid-phase microextraction (HS-SPME) fibers and analyzed using gas chromatography coupled with mass spectrometry (GC-MS). The results indicated that the density and degree of protrusion and the number of plastids and osmiophilic matrix granules in the petals play key roles in emitting the fragrance. There were distinct differences in the components and relative contents of volatile compounds among the different strains of N. hybrid. In total, 29, 34, 39, and 43 volatile compounds were detected in the cut flower petals of the blue-purple type (Nh-1), pink type (Nh-2), yellow type (Nh-3) and white type (Nh-4) of N. hybrid at the flowering stage, with total relative contents of 96.78%, 97.64%, 98.56%, and 96.15%, respectively. Analyses of these volatile components indicated that alkenes, alcohols, and alkanes were the three major types of volatile components in the flower petals of N. hybrid. The predominant volatile compounds were benzyl alcohol, pentadecane, trans-α-bergamotene, (E)-β-farnesene, and (6E,9E)-6,9-heptadecadiene, and some of these volatile compounds were terpenes, which varied among the different strains. Moreover, on the basis of hierarchical cluster analysis (HCA) and principal component analysis (PCA), the N. hybrid samples were divided into four groups: alcohols were the most important volatile compounds for Nh-4 samples; esters and aldehydes were the predominant volatiles in Nh-3 samples; and ketones and alkenes were important for Nh-2 samples. These compounds contribute to the unique flavors and aromas of the four strains of N. hybrid.

Margin of Exposure Analyses and Overall Toxic Effects of Alcohol with Special Consideration of Carcinogenicity

Quantitative assessments of the health risk of the constituents of alcoholic beverages including ethanol are reported in the literature, generally with hepatotoxic effects considered as the endpoint. Risk assessment studies on minor compounds such as mycotoxins, metals, and other contaminants are also available on carcinogenicity as the endpoint. This review seeks to highlight population cancer risks due to alcohol consumption using the margin of exposure methodology. The individual and cumulative health risk contribution of each component in alcoholic beverages is highlighted. Overall, the results obtained consistently show that the ethanol contributes the bulk of harmful effects of alcoholic beverages, while all other compounds only contribute in a minor fashion (less than 1% compared to ethanol). Our data provide compelling evidence that policy should be focused on reducing total alcohol intake (recorded and unrecorded), while measures on other compounds should be only secondary to this goal.

Catalytic Oxidation of Toluene into Benzaldehyde and Benzyl Alcohol Using Molybdenum-Incorporated Manganese Oxide Nanomaterials

Oxidation of toluene (an organic pollutant), into useful chemical products, is of great interest nowadays. However, efficient conversion of toluene under mild and sustainable conditions is a thought-provoking task. Here, we report MnMoO₄ nanomaterials (CH1-CH2), synthesized through a very facile solvothermal approach. Catalytic efficiencies of MnMoO₄ nanomaterials were evaluated by direct oxidation of toluene via C-H activation. Toluene was converted into benzaldehyde and benzyl alcohol in the presence of H₂O₂ as an oxidant at 80 °C. The reaction parameters, that is, catalyst dose, time, and toluene concentration, were varied to obtain the optimal conditions for the oxidation process. The 40.62% maximum toluene conversion rate was obtained after 18 h of oxidation activity with 0.06 g of catalyst CH1. A maximum of 78% benzaldehyde selectivity was obtained with 0.06 g of catalyst CH1 after 18 h of toluene oxidation activity. Also, 62.33% benzyl alcohol selectivity was achieved using 0.1 g of catalyst CH1 after 1 h of activity. Several catalytic cycles were run with CH1 to evaluate catalyst reusability. Potential % toluene conversion was obtained for up to six cycles and their turnover frequencies were found to be 1.94-1.01 s^-1. FTIR spectra of catalyst CH1 before and after recovery indicate no significant change. The good conversion rate of toluene and efficient selectivity toward benzaldehyde and benzyl alcohol indicates the robustness and high potential of these catalysts to oxidize toluene under a milder, greener, and hazardous chlorine-free environment.

Benzaldehyde, A New Absorption Promoter, Accelerating Absorption on Low Bioavailability Drugs Through Membrane Permeability

Styrax, one of the most famous folk medicines, is a necessary medicine in formulas to help other drugs reach the focal zone and maximize the effectiveness, the mechanism that promotes absorption is not clear yet. This study was carried out to investigate the absorption-promoting effects and the mechanism of benzaldehyde, a key active compound of styrax, on the diffusion rates of drugs with different oral bioavailability. Caco-2 transport experiments were used to investigate the transport rate. Molecular Dynamics Simulation analysis and fluorescence-anisotropy measurements were used to explore the underlying mechanism of absorption-promoting. Validation test in vivo was carried out to reveal the absorption-promoting effects of benzaldehyde on high hydrophilicity drugs. Our data indicated that benzaldehyde(50 μM) elevated the cumulative quantity of passively diffusion drugs with high hydrophilicity such as acyclovir and hydrochlorothiazide. MD and membrane fluidity data explained that benzaldehyde can loosen the structure of the lipid bilayer. The validation tests showed that benzaldehyde (140 mg/kg) remarkably increased the C_max and AUC0-6 of acyclovir and hydrochlorothiazide in vivo. These present studies suggested that benzaldehyde can promote the absorption of drugs with a lower oral bioavailability through disturbing the integrity of lipid bilayer enhanced membrane permeability.

Cinnamil- and Quinoxaline-Derivative Indicator Dyes for Detecting Volatile Amines in Fish Spoilage

Colorimetric indicators are versatile for applications such as intelligent packaging. By interacting with food, package headspace, and/or the ambient environment, color change in these indicators can be useful for reflecting the actual quality and/or monitoring distribution history (e.g., time and temperature) of food products. In this study, indicator dyes based on cinnamil and quinoxaline derivatives were synthesized using aroma compounds commonly present in food: diacetyl, benzaldehyde, p-tolualdehyde and p-anisaldehyde. The identities of cinnamil and quinoxaline derivatives were confirmed by Fourier transform infrared (FT-IR) spectroscopy, mass spectrometry (MS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR analyses. Photophysical evaluation showed that the orange-colored cinnamil derivatives in dimethylsulfoxide (DMSO) turned to dark brownish coloration when exposed to strong alkalis. The cinnamil and acid-doped quinoxaline derivatives were sensitive to volatile amines commonly present during the spoilage in seafood. Quinoxaline derivatives doped by strong organic acid were effective as pH indicators for volatile amine detection, with lower detection limits than cinnamil. However, cinnamil exhibited more diverse color profiles than the quinoxaline indicators when exposed to ammonia, trimethylamine, triethylamine, dimethylamine, piperidine and hydrazine. Preliminary tests of acid-doped quinoxaline derivatives on fresh fish demonstrated their potential as freshness indicators in intelligent packaging applications.

Headspace conditions and ingredients can affect artefactual benzene formation in beverages

A headspace sampling-gas chromatography/mass spectrometry (HS-GC/MS) method using mild HS conditions (40 °C, 30 min) was established, validated in terms of specificity, linearity (1.75-87.65 ng mL^-1), precision (0.3-9.1% RSD), and accuracy (81.1-117.7%); and applied for the monitoring of 900 commercial beverage samples of six different types. These mild (low-temperature) conditions were compared with 1) optimized (high-temperature) conditions and 2) a liquid-phase microextraction method involving no heat treatment. This method was desirable because a high equilibrium temperature induced artefactual benzene formation from benzoate and ascorbic acid. In a 2_IV^8-3 fractional factorial design, eight variables-ascorbic acid, benzoate, benzaldehyde, Cu²⁺, Fe²⁺, riboflavin, pyridoxine, and heat treatment-were tested as potential factors affecting benzene formation. All variables except Fe²⁺ and pyridoxine significantly affected benzene formation, both individually and interactively. The present study suggests an accurate and reliable method for benzene analysis and provides strategies to prevent unintentional benzene formation in beverages.

Phenolic Composition Stability and Antioxidant Activity of Sour Cherry Liqueurs

The aim of the study was to evaluate changes of phenolic and anthocyanin contents, antioxidant activity, aroma compounds and color of sour cherry liqueurs with and without sugar during 6 months of storage at temperatures of 15 °C and 30 °C. Contents of phenolic compounds (HPLC, UPLC-MS) and antiradical activity (ABTS) changes were measured. Color changes were measured by an objective method (ColorQuest XE). During storage fluctuations of phenolic compounds and antioxidant activity content were observed. The content of substances which react with Folin-Ciocalteu reagent was comparable before and after 24 weeks. During the 24 weeks of storage, the highest average antioxidant activity against ABTS radicals was shown by sour cherry liqueurs without sugar, stored at 15 °C. Quicker degradation of anthocyanins was observed in liqueurs without sugar, stored at 30 °C (t_1/2—5.9 weeks in liqueurs with sugar and 6.6 weeks in liqueurs without sugar). Better stability of red color was observed in liqueurs with sugar, stored at 15 °C. The content of the dominant aroma compound, benzaldehyde, increased during storage. Long-term storage and sugar addition decreases color attributes but increases organoleptic value without of great influence on antioxidant activity. Studies on a half-year period of liqueur storage showed that their characteristic features are almost unchanged if stored at 15 °C and without sugar added, but organoleptic properties were better in samples stored at 30 °C.

Carcinogenic compounds in alcoholic beverages: an update

The consumption of alcoholic beverages has been classified as carcinogenic to humans by the International Agency for Research on Cancer (IARC) since 1988. More recently, in 2010, ethanol as the major constituent of alcoholic beverages and its metabolite acetaldehyde were also classified as carcinogenic to humans. Alcoholic beverages as multi-component mixtures may additionally contain further known or suspected human carcinogens as constituent or contaminant. This review will discuss the occurrence and toxicology of eighteen carcinogenic compounds (acetaldehyde, acrylamide, aflatoxins, arsenic, benzene, cadmium, ethanol, ethyl carbamate, formaldehyde, furan, glyphosate, lead, 3-MCPD, 4-methylimidazole, N-nitrosodimethylamine, pulegone, ochratoxin A, safrole) occurring in alcoholic beverages as identified based on monograph reviews by the IARC. For most of the compounds of alcoholic beverages, quantitative risk assessment provided evidence for only a very low risk (such as margins of exposure above 10,000). The highest risk was found for ethanol, which may reach exposures in ranges known to increase the cancer risk even at moderate drinking (margin of exposure around 1). Other constituents that could pose a risk to the drinker were inorganic lead, arsenic, acetaldehyde, cadmium and ethyl carbamate, for most of which mitigation by good manufacturing practices is possible. Nevertheless, due to the major effect of ethanol, the cancer burden due to alcohol consumption can only be reduced by reducing alcohol consumption in general or by lowering the alcoholic strength of beverages.