Ultra-sensitive and absolute quantitative detection of Cu2+ based on DNAzyme and digital PCR in water and drink samples

Engineering DNAzyme strategies for fluorescent detection of lead ions based on RNA cleavage-propelled signal amplification

Based on the high recognition ability and flexible programmability of GR5 DNAzyme, two fluorescent biosensors were engineered for amplified detection of Pb²⁺ via incorporating Ti₃C₂T_X MXenes and embedding 2-aminopurine (2-AP), respectively. The quencher-required approach relied on the DNA affinity and fluorescence quenching ability of Ti₃C₂T_X MXenes. Benefiting from the low background signal modulated by Ti₃C₂T_X MXenes, the sensitive determination of Pb²⁺ was achieved in the linear range of 0.2-10 ng mL^-1 with the limit of detection (LOD) of 0.05 ng mL^-1. The quencher-free approach combined the fluorescent trait of 2-AP embedded in DNA structure, and the RNA cleavage-propelled digestion process of Exonuclease I (Exo I) for signal amplification, indicating the sensitive detection of Pb²⁺ with the LOD as low as 0.02 ng mL^-1 in the linear range of 0.1-10 ng mL^-1. Both DNAzyme assays exhibited simple procedures, favorable specificity, rapid analysis, and satisfactory application in standard reference materials (lead in drinking water) and spiked water samples. The two fluorescent biosensors established in this work would not only provide theoretic fundament for DNA adsorption of Ti₃C₂T_X MXenes and the design of 2-AP-embedded DNAzyme assays, but also hold a great potential for on-site monitoring of lead pollution in water samples.

One-pot synthesis of copper nanocluster/Tb-MOF composites for the ratiometric fluorescence detection of Cu2

The increasing degradation of ecosystems due to heavy metal residues has led to environment and food contamination, prompting the development of convenient platforms for monitoring heavy metals. Here, a new dual-emission fluorescent sensor CuNCs@Tb@UiO-66-(COOH)₂ for the detection of copper ions (Cu²⁺ ) has been synthesized by one-pot encapsulation of Tb (III) and glutathione-stabilized copper nanoclusters (CuNCs) into metal-organic frameworks (MOFs) UiO-66-(COOH)₂ . In this ratiometric sensor, the fluorescence intensity of Tb³⁺ decreased significantly upon the addition of Cu²⁺ , while that of CuNCs showed good stability, together with an apparent color change. Therefore, ratiometric fluorescence detection of Cu²⁺ can be accomplished by measuring the ratio of the fluorescence intensity at the 450 nm (F₄₅₀ ) wavelength of CuNCs to the 548 nm (F₅₄₈ ) emission of Tb³⁺ in the fluorescence spectra of the CuNCs@Tb@UiO-66-(COOH)₂ suspension. Moreover, the obtained fluorescent probe shows good results in the detection of actual samples. This work can provide the basis of method for the exploration of ratiometric fluorescence and visual sensors of trace pollutants analysis in complicated samples.

DNAzyme-Amplified Electrochemical Biosensor Coupled with pH Meter for Ca2+ Determination at Variable pH Environments

For more than 50% of multiparous cows, it is difficult to adapt to the sudden increase in calcium demand for milk production, which is highly likely to cause hypocalcemia. An electrochemical biosensor is a portable and efficient method to sense Ca²⁺ concentrations, but biomaterial is easily affected by the pH of the analyte solution. Here, an electrochemical biosensor was fabricated using a glassy carbon electrode (GCE) and single-walled carbon nanotube (SWNT), which amplified the impedance signal by changing the structure and length of the DNAzyme. Aiming at the interference of the pH, the electrochemical biosensor (GCE/SWNT/DNAzyme) was coupled with a pH meter to form an electrochemical device. It was used to collect data at different Ca²⁺ concentrations and pH values, and then was processed using different mathematical models, of which GPR showed higher detecting accuracy. After optimizing the detecting parameters, the electrochemical device could determine the Ca²⁺ concentration ranging from 5 μM to 25 mM, with a detection limit of 4.2 μM at pH values ranging from 4.0 to 7.5. Finally, the electrochemical device was used to determine the Ca²⁺ concentrations in different blood and milk samples, which can overcome the influence of the pH.

Enhanced Bio-Barcode Immunoassay Using Droplet Digital PCR for Multiplex Detection of Organophosphate Pesticides

A bio-barcode immunoassay based on droplet digital polymerase chain reaction (ddPCR) was developed to simultaneously quantify triazophos, parathion, and chlorpyrifos in apple, cucumber, cabbage, and pear. Three gold nanoparticle (AuNP) probes and magnetic nanoparticle (MNP) probes were prepared, binding through their antibodies with the three pesticides in the same tube. Three groups of primers, probes, templates, and three antibodies were designed to ensure the specificity of the method. Under the optimal conditions, the detection limits (expressed as IC₁₀) of triazophos, parathion, and chlorpyrifos were 0.22, 0.45, and 4.49 ng mL^-1, respectively. The linear ranges were 0.01-20, 0.1-100, and 0.1-500 ng mL^-1, and the correlation coefficients (R²) were 0.9661, 0.9834, and 0.9612, respectively. The recoveries and relative standard deviations (RSDs) were in the ranges of 75.5-98.9 and 8.3-16.7%. This study provides the first insights into the ddPCR for the determination of organophosphate pesticides. It also laid the foundation for high-throughput detection of other small molecules.

Biosensing with DNAzymes

This article provides a comprehensive review of biosensing with DNAzymes, providing an overview of different sensing applications while highlighting major progress and seminal contributions to the field of portable biosensor devices and point-of-care diagnostics. Specifically, the field of functional nucleic acids is introduced, with a specific focus on DNAzymes. The incorporation of DNAzymes into bioassays is then described, followed by a detailed overview of recent advances in the development of in vivo sensing platforms and portable sensors incorporating DNAzymes for molecular recognition. Finally, a critical perspective on the field, and a summary of where DNAzyme-based devices may make the biggest impact are provided.

Simultaneous and ultra-sensitive detection of Cu2+ and Mg2+ in wine and beer based on dual DNA tweezers and entropy-driven three-dimensional DNA nanomachine

Simultaneous and ultra-sensitive detection strategy of Cu²⁺ and Mg²⁺ in wine and beer was developed based on dual DNA tweezers and entropy-driven three-dimensional DNA nanomachine. The dual DNAzyme can simultaneously respond to two kinds of metal ions and cause two kinds of "turn-on" fluorescent signals. The working principle of this strategy was indirectly proven. In addition, some key experimental parameters were also optimized. Under the optimum conditions, the limit of detection was 10 pM for Cu²⁺ and 2 nM for Mg²⁺ respectively which was significantly improved by entropy driven amplification. This strategy also showed good selectivity and specificity. It was successfully used to detect of Cu²⁺ and Mg²⁺ in wine and beer with 5.26% to 9.12% of relative standard deviation and 90.4% to 110.5% of recoveries.

Enhancing the Sensitivity of the Bio-barcode Immunoassay for Triazophos Detection Based on Nanoparticles and Droplet Digital Polymerase Chain Reaction

An ultrasensitive bio-barcode competitive immunoassay method based on droplet digital polymerase chain reaction (ddPCR) was developed for the determination of triazophos. Gold nanoparticles (AuNPs) were coated with monoclonal antibodies (mAbs) and complementary double-stranded DNA (dsDNA), which included bio-barcode DNA and thiol-capped DNA. Magnetic nanoparticle (MNP) probes were constructed by modifying the MNPs with ovalbumin-hapten conjugates (OVA-hapten). The target pesticide and OVA-hapten on the surface of the MNP probes competed with the AuNP probes simultaneously, and then the bio-barcode DNA was released for quantification by ddPCR. The concentration of released DNA was inversely proportional to the concentration of pesticide to be tested. Under the optimum conditions, the competitive immunoassay exhibited a wide linear range of 0.01-20 ng/mL and a low detection limit of 0.002 ng/mL. Spike recovery tests were carried out using apple, rice, cabbage, and cucumber samples to verify the feasibility of the method. The recovery and relative standard deviations (RSDs) of the technique ranged from 76.9 to 94.4% and from 10.8 to 19.9%, respectively. To further validate the results, a linear correlation analysis was performed between the proposed method and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Consequently, the bio-barcode immunoassay based on nanoparticles and ddPCR, an ultrasensitive method, showed great potential for the determination of target pesticides in real samples.

A mediator-free whole-cell electrochemical biosensing system for sensitive assessment of heavy metal toxicity in water

A bioelectrochemical sensing system (BES) based on electroactive bacteria (EAB) has been used as a new and promising tool for water toxicity assessment. However, most EAB can reduce heavy metals, which usually results in low toxicity response. Herein, a starvation pre-incubation strategy was developed which successfully avoided the metal reduction during the toxicity sensing period. By integrating this starvation pre-incubation procedure with the amperometric BES, a sensitive, robust and mediator-free biosensing method for heavy metal toxicity assessment was developed. Under the optimized conditions, the IC50 (half maximal inhibitory concentration) values for Cu²⁺, Ni²⁺, Cd²⁺, and Cr⁶⁺ obtained were 0.35, 3.49, 6.52, 2.48 mg L^-1, respectively. The measurement with real water samples also suggested this method was reliable for practical application. This work demonstrates that it is feasible to use EAB for heavy metal toxicity assessment and provides a new tool for water toxicity warning.

Ultrasensitive Detection of Pb2+ Based on a DNAzyme and Digital PCR

In this study, an ultrasensitive detection method for aqueous Pb²⁺ based on digital polymerase chain reaction (dPCR) technology and a Pb²⁺-dependent DNAzyme was developed. In the presence of Pb²⁺, the Gr-5 DNAzyme was activated and catalyzed the hydrolytic cleavage of the substrate strand, resulting in an increase in the amount of template DNA available for dPCR and a resultant change in the number of droplets showing a positive signal. Moreover, the detection system was found to be sensitive and stable in environmental sample detection. In summary, an ultrasensitive quantitative detection method for Pb²⁺ within environmental substrates was established.

DNAzyme sensors for detection of metal ions in the environment and imaging them in living cells

The on-site and real-time detection of metal ions is important for environmental monitoring and for understanding the impact of metal ions on human health. However, developing sensors selective for a wide range of metal ions that can work in the complex matrices of untreated samples and cells presents significant challenges. To meet these challenges, DNAzymes, an emerging class of metal ion-dependent enzymes selective for almost any metal ion, have been functionalized with fluorophores, nanoparticles and other imaging agents and incorporated into sensors for the detection of metal ions in environmental samples and for imaging metal ions in living cells. Herein, we highlight the recent developments of DNAzyme-based fluorescent, colorimetric, SERS, electrochemical and electrochemiluminscent sensors for metal ions for these applications.