Magnetic graphene dispersive solid phase extraction combining high performance liquid chromatography for determination of fluoroquinolones in foods

In-tube solid phase extraction with graphitic-based polyurethane sponge as a superhydrophobic sorbent and determination of drug residues in foodstuffs using high-performance liquid chromatography

Veterinary drugs used in animal husbandry raise public health concerns due to their residues in the bodies of animals. This study employs a simple and quick sample preparation technique, in-tube solid phase extraction, to extract drug residues from foodstuffs, including eggs, honey, and water. This technique utilizes the synergy of graphitic-based materials and polyurethane sponges (PU) combined through dip coating method to make reusable sorbents for extracting drugs, including amoxicillin, paracetamol, ciprofloxacin, and cefixime. These prepared sorbents were characterized using FTIR, SEM, and XRD. HPLC analysis assessed the extraction efficiency, considering various parameters such as analyte concentration, sample solution pH, extraction time, type of eluting solvent, and graphitic-based polyurethane sponge reusability and stability. The proposed method exhibited a linear response for all three sorbents in the range of 0.03-1000 µg mL-1, with LOD 0.03-1.60 µg mL-1 and LOQ 0.18-4.84 µg mL-1. The % RSD ranged from 1.3 to 9.3 %, with recoveries of up to 98.42 %.

Hydroxyl-containing triazine-based conjugated microporous polymers for solid phase extraction of fluoroquinolone antibiotics in the environment and food samples

Fluoroquinolones (FQs) are a category of broadly used antibiotics. Development of an effective and sensitive approach for determination of trace FQs in environmental and food samples is still challenging. Herein, the hydroxyl-containing triazine-based conjugated microporous polymers (CMPs-OH) was constructed and served as SPE absorbent for the efficient enrichment of FQs. Based on DFT simulations, the excellent enrichment capacity between CMPs-OH and FQs was contributed by hydrogen bonding and π-π interactions. In combination with high-performance liquid chromatography-tandem mass spectrometry, the proposed approach exhibited a wide linear range (0.2-400 ng L-1), low detection limits (0.05-0.15 ng L-1), and good intraday and interday precisions under optimal conditions. In addition, the established method was effectively utilized for the determination of FQs in fourteen samples with recoveries between 82.6 % and 109.2 %. This work provided a feasible sample pretreatment method for monitoring FQs in environmental and food matrices.

Effective extraction and determination of 24 quinolones in water and egg samples using a novel magnetic covalent organic framework combined with UPLC-MS/MS

The excessive use of quinolones (QNs) has seriously threatened human health. In this study, a novel functionalized magnetic covalent organic framework Fe3O4@SiO2@Ah-COF was fabricated with biphenyl-3,3',5,5'-tetracarbaldehyde and hydrazine hydrate (85%) as monomers and was used as a magnetic solid-phase extraction (MSPE) absorbent for the determination of 24 QNs in water and egg samples through ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The extraction parameters of MSPE were optimized, including pH, adsorbent dosage, adsorption time, and eluent type. An effective and rapid detection method was then established, which showed good linearity (R2 ≥ 0.9990), low limits of detection (0.003-0.036 μg L-1) and low limits of quantitation (0.008-0.110 μg L-1) for QNs. The good recoveries of 24 QNs in water and egg samples were in the range of 70.3-106.1% and 70.4-119.7%, respectively, with relative standard deviations lower than 10% (n = 5). As a result, Fe3O4@SiO2@Ah-COF is a promising magnetic adsorbent, and the established method was successfully applied for the determination of 24 QNs in water and egg samples.

Current analytical strategies for the determination of quinolone residues in milk

Quinolones are potent antibacterial drugs extensively utilized for treating bacterial infections in poultry. However, the presence of quinolone antibiotic residues in milk is a matter of concern due to potential health risks and adverse effects on milk quality. This review provides an overview of current analytical strategies for the determination of quinolone residues in milk. Various sample preparation techniques, such as liquid-phase extraction, solid-phase extraction and QuEChERS, are discussed, along with detection methods including instrument-based detection, immune-based detection, and microbial detection. The advantages and limitations of each method are highlighted, as well as their applicability in different stages of milk production. Additionally, recent advancements in sample preparation and detection methods are presented. This comprehensive review aims to contribute to the development of accurate and reliable methods for the detection of quinolone residues in milk, ensuring the safety and quality of dairy products.

Fabrication of zwitterionic magnetic microporous organic network for efficient extraction of fluoroquinolone antibiotics from meat samples

A zwitterionic magnetic microporous organic network (MMON-SO3H-NH2) with numerous amino and sulfonic acid ion-pare binding sites was designed and synthesized for efficient magnetic solid-phase extraction (MSPE) of fluoroquinolones (FQs) from meat samples. The core-shell MMON-SO3H-NH2 offered large specific surface area, rapid magnetic responsiveness, good stability, and multiple binding sites for FQs. The density functional theory and independent gradient model evaluations confirmed hydrogen bonding, π-π and ion-pair interactions between MMON-SO3H-NH2 and FQs. Under the optimal conditions, the established MMON-SO3H-NH2-MSPE-HPLC-UV method gave wide linear range (0.15-1000 μg L-1), low limits of detection (0.05-4.5 μg L-1) and limits of quantitation (0.15-13 μg L-1), and high enrichment factors (82.1-99.6) using 3 mg of adsorbent. This work demonstrates that the preparation of zwitterionic MONs is an efficient way to promote the extraction performance of MONs for zwitterionic targets and provides an effective sample pretreatment method for enriching and monitoring FQs in complex food matrices.

Zinc (Ⅱ) functionalized magnetic geopolymer as sorbents for rapid extraction of Fluoroquinolones in food prior to quantification by UHPLC-MS/MS

A novel Zn@MGeo sorbent was easily constructed and can bind with FQs through the synergistic effect of electrostatic interaction and coordination. With the Zn@MGeo as sorbent, a MSPE-UHPLC-MS/MS method was established for simultaneous detection of FQs in complex matrices. The whole extraction process could be completed using 6.0 mg sorbent within 10 min under the optimal conditions. The established quantitative method obtained a wide linear range (0.01-200 μg/kg, R² > 0.9987), high sensitivity (LODs: 0.005-0.05 μg/kg) and negligible matrix effect. The method was applied for analysis of real samples, with recoveries between 75.6% and 103.7%. In addition, the sorbent could be reused at least 9 times without reducing the adsorption performance. In general, the established method not only proposes a novel sorbent for FQs extraction, but also provides a powerful tool for rapid and sensitive detection of FQs in food matrices with practical application value.

Simultaneous determination of six antibiotics belonging to four different classes in chicken meat BY HPLC/DAD and verification BY LC-MS/MS

The hypothesis of this study was to develop an extraction method allowing side-by-side extraction of six antibiotics belonging to four different classes and an HPLC/DAD method for the determination of their residues in chicken breast meat. The validation data showed that this hypothesis was achieved. The results were then confirmed by LC-MS/MS method. Sample preparation was based on the classical solid-liquid extraction with methanolic citric acid. The average recoveries were satisfactory and ranged from 75.68 to 101.3%. The linearity of the developed HPLC/DAD method was very high in the concentration range studied (R² > 0.9969). The accuracy and precision of the analytical method were between -10.8 and 12.0% relative error and 0.82 to 10.1% relative standard deviation, respectively. The LODs for five antibiotics ranged from 0.6 to 2.7 µg kg^-1 and LOQs ranged from 2.0 to 8.9 µg kg^-1. For penicillin G, the LOD was 0.16 and LOQ was 0.52 mg kg^-1.

Recent advances and applications of magnetic covalent organic frameworks in food analysis

Recently, covalent organic frameworks (COFs) have been widely used to prepare magnetic adsorbents for food analysis due to their highly tunable porosity, large specific surface area, excellent chemical and thermal stability and large delocalised π-electron system. This review summarises the main types and preparation methods of magnetic COFs and their applications in food analysis for the detection of pesticide residues, veterinary drugs, endocrine-disrupting phenols and estrogens, plasticisers and other food contaminants. Furthermore, challenges and future outlook in the development of magnetic COFs for food analysis are discussed.

A review on recent advances in the applications of composite Fe3O4 magnetic nanoparticles in the food industry

Fe3O4 magnetic nanoparticles (MNPs) have attracted tremendous attention due to their superparamagnetic properties, large specific surface area, high biocompatibility, non-toxicity, large-scale production, and recyclability. More importantly, numerous hydroxyl groups (-OH) on the surface of Fe3O4 MNPs can provide coupling sites for various modifiers, forming versatile nanocomposites for applications in the energy, biomedicine, and environmental fields. With the development of science and technology, the potential of nanotechnology in the food industry has also gradually become prominent. However, the application of composite Fe3O4 MNPs in the food industry has not been systematically summarized. Herein, this article reviews composite Fe3O4 MNPs, including their properties, modifications, and physical functions, as well as their applications in the entire food industry from production to processing, storage, and detection. This review lays a solid foundation for promoting food innovation and improving food quality and safety.

A Direct Z-Scheme AgBr/CuBi2O4 Photocathode for Ultrasensitive Detection of Ciprofloxacin and Ofloxacin by Controlling the Release of Luminol in Self-Powered Microfluidic Photoelectrochemical Aptasensors

An innovative self-powered microfluidic photoelectrochemical (PEC) aptasensor was developed that uses photoactive AgBr/CuBi₂O₄ (ACO) composites as the photocathode matrix for ultrasensitive detection of ciprofloxacin (CIP) and ofloxacin (OFL). The formation of direct Z-scheme heterojunctions in ACO composites greatly aided electron/hole pair separation. Meanwhile, ZnIn₂S₄-decorated CdS nanorod arrays (CZIS) as the photoanode were used instead of a platinum counter electrode to provide electrons. The "signal-off" CIP detection was accomplished through the steric hindrance effect in the photoanode due to the combination of aptamer_(CIP) and CIP. To increase the cathodic photocurrent intensity for OFL determination, controlled release of luminol was first used. Luminol molecules were successfully embedded in the porous structure of silicon dioxide nanospheres (PSiO₂) by the electrostatic adsorption between PSiO₂ and aptamer_(OFL). The luminol released by specific recognition between OFL and aptamer_(OFL) could not only react with •O₂^- but also produce chemiluminescence emission, resulting in the "signal-on" state. Because of the signal "on-off-on", the proposed aptasensor exhibited wide linear ranges for CIP (0.001-100 ng/mL) and OFL (0.0005-100 ng/mL) detection. Furthermore, the low detection limits of CIP (0.06 pg/mL) and OFL (0.022 pg/mL) could achieve the ultrasensitive analysis.

Application of Graphene and its Derivatives in Detecting Hazardous Substances in Food: A Comprehensive Review

Graphene and its derivatives have been a burning issue in the last 10 years. Although many reviews described its application in electrochemical detection, few were focused on food detection. Herein, we reviewed the recent progress in applying graphene and composite materials in food detection during the past 10 years. We pay attention to food coloring materials, pesticides, antibiotics, heavy metal ion residues, and other common hazards. The advantages of graphene composites in electrochemical detection are described in detail. The differences between electrochemical detection involving graphene and traditional inherent food detection are analyzed and compared in depth. The results proved that electrochemical food detection based on graphene composites is more beneficial. The current defects and deficiencies in graphene composite modified electrode development are discussed, and the application prospects and direction of graphene in future food detection are forecasted.

Synthesis of surface dual-template molecularly imprinted silica nanoparticles for extraction of ciprofloxacin and norfloxacin

Synthesis of selective dual-template molecularly imprinted silica nanoparticles (MI-SiNPs) on the surface of graphene quantum dots (GQDs) for the simultaneous extraction of ciprofloxacin (CIP) and norfloxacin (NOR) from biological samples.

Core-shell magnetic porous organic polymer for magnetic solid-phase extraction of fluoroquinolone antibiotics in honey samples followed by high-performance liquid chromatography with fluorescence detection

By monomer-mediated in-situ growth synthesis strategy, with hydroquinone and 1,3,5-tris(4-aminophenyl)benzene as monomers, a core-shell magnetic porous organic polymer was synthesized through a simple azo reaction. Based on this, a magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method was proposed for the analysis of fluoroquinolones in a honey sample. With ofloxacin, ciprofloxacin, enrofloxacin, lomefloxacin, and difloxacin as target analytes, factors affecting the extraction efficiency had been optimized. The LODs were 1.5-5.4 ng/L (corresponding to 0.23-0.81 μg/kg in honey). The linear range was 0.005-20 μg/L for difloxacin, 0.01-20 μg/L for ofloxacin, ciprofloxacin and lomefloxacin, and 0.02-20 μg/L for enrofloxacin. The enrichment factor was 84.4-91.7-fold with a high extraction efficiency of 84.4-91.7%. The method was assessed by the analysis of target fluoroquinolones in honey samples, and the recoveries for the spiked samples were 79.3-95.8%. The results indicated that the established magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method is efficient for the analysis of trace fluoroquinolones in honey.

Magnetic porous carbons derived from iron-based metal-organic framework loaded with glucose for effective extraction of synthetic organic dyes in drinks

The conversion of metal-organic frameworks (MOFs) to porous carbon has attracted extensive attention for developing multifunctional adsorbent materials. Herein, we demonstrated a facile method to prepare magnetic porous carbon via calcinating MIL-101(Fe) precursor loaded with glucose at 700 °C in an N₂ atmosphere. The obtained magnetic porous carbon (MPCG) contained plenty of oxygen-containing functional groups and exhibited an enlarged specific surface area (177.7 m²/g) compared with its precursor (41.2 m²/g). In addition, MPCG can be easily separated from the matrix by a magnet. Benefitting from these advantages, the magnetic porous carbon exhibited high affinity toward four synthetic organic dyes (amaranth, ponceau 4R, sunset yellow, and lemon yellow) in an aqueous solution. Moreover, the adsorbent can be applied to quantitatively detect synthetic organic dyes in drinks coupled with chromatography. A new magnetic solid-phase extraction method for dye analysis yielded reasonable linearity (r □ 0.99), low limits of detection (0.047-0.076 μg/L), and good precision within the analyte concentration range of 0.25-50 μg/L.

Critical review of solid phase extraction for multiresidue clean-up and pre-concentration of antibiotics from livestock and poultry manure

The release of antibiotics into the environment from agricultural industries has received tremendous attention in recent years. Nonpoint source contamination of the terrestrial environment by these compounds can result from fertilisation of agricultural soils with manure. The presence of antibiotics and their metabolites in manure may pose a threat to agro-ecosystems. This may result in the emergence of antibiotic resistance bacteria in humans through the food chain and this is a major concern globally at the moment. Therefore, monitoring of manure for antibiotic residues is of vital importance in order to assess the risks of environmental pollution to human health by these drugs. Several sample pre-treatment techniques have been developed for the extraction of antibiotic residues from complex matrices including manure over the years. Despite new developments in recent years in separation science where the common trend is miniaturisation and green approaches, solid-phase extraction is still the most widely used technique in the extraction of antibiotics from agricultural wastes such as manure. In view of this, the aim of this review was to give a critical overview of studies that have been conducted in the past 6 years on the extraction of antibiotic residues from manure employing solid-phase extraction based on Oasis HLB and Strata-X. Adsorption mechanisms of these sorbents were also briefly discussed.

Simultaneous determination of 11 quinolone residues in freshwater fish samples by magnetic solid-extraction coupled to liquid chromatography-tandem mass spectrometry

In this study, well-defined core-shell ethylenediamine-functional magnetic ferroferric oxide polymers were prepared and were fully characterized by transmission electron microscopy, scanning electron microscopy, FTIR spectroscopy, and vibrating sample magnetometry. Then, it was used as a magnetic solid-phase extraction adsorbent for simultaneous determination of 11 trace quinolone residues in freshwater fish samples coupled to liquid chromatography-tandem mass spectrometry. The obtained results revealed that the adsorbent showed good extraction efficiency and the adsorption mechanisms referred to hydrogen bond and π-π stacking interaction. Moreover, the magnetic solid-phase extraction conditions were also carefully optimized. The limits of quantitation of 11 quinolones were in the range of 0.15-0.36 μg/kg, while spiking recoveries were in the range of 80.2-99.5% for the 11 quinolones in freshwater fish samples at four spiked levels including limits of quantitation, 1.0, 40.0, and 80.0 μg/kg with the relative standard deviations ranging from 0.8 to 9.1%. The proposed method was applied to analyze 45 freshwater fish samples, and enrofloxacin was detected in 91.1% samples with concentrations ranging from 0.659 to 333 μg/kg. It could be concluded that the proposed method is fast, simple, sensitive, and accurate for the routine monitor of freshwater fish.

Polyethyleneimine-functionalized Fe3O4/attapulgite particles for hydrophilic interaction-based magnetic dispersive solid-phase extraction of fluoroquinolones in chicken muscle

Fluoroquinolone (FQ) residues in foods of animal origin may threaten public health but are challenging to determine because of their low contents and complex matrices. In this study, novel polyethyleneimine-functionalized Fe₃O₄/attapulgite magnetic particles were prepared by a simple co-mixing method and applied as hydrophilic sorbents for the magnetic dispersive solid-phase extraction (MSPE) of three FQs, i.e., ciprofloxacin, norfloxacin, and enrofloxacin, from chicken muscle samples. The preparation of the magnetic particles was of high reproducibility and the products could be reused many times with high adsorption capacity. The key experimental factors possibly influencing the extraction efficiencies, including sample solution, extraction time, sample loading volume, desorption solution, desorption time, and elution volume were investigated. Under optimum MSPE conditions, the analytes in chicken muscle samples were extracted and then determined by RPLC-MS/MS in MRM mode. Good linearity was obtained for the analytes with correlation coefficients ranged from 0.9975 to 0.9995. The limits of detection were in the range of 0.02-0.08 μg kg^-1, and the recoveries of the spiked FQs in chicken muscle samples ranged from 83.9 to 98.7% with relative standard deviations of 1.3-6.8% (n = 3). Compared with the traditional MSPE methods based on hydrophobic mechanism, this hydrophilic interaction-based method significantly simplifies the sample pretreatment procedure and improves repeatability. This method is promising for accurate monitoring of FQs in foods of animal origin.

Determination of antibiotics in meat samples using analytical methodologies: A review

Antibiotics are widely used to prevent or treat some diseases in human and veterinary medicine and also as animal growth promoters. The presence of these compounds in foods derived from food-producing animals can be a risk for human health. Consequently, regulatory agencies have set maximum residue limits for antibiotics in food samples. Therefore, the development of novel methodologies for its determination in food samples is required. Specifically, the analysis and quantification of these substances in meat tissues is a challenge for the analytical chemistry research community. This is due to the complexity of the matrix and the low detection limits required by the regulatory agencies. In this sense, a comprehensive review on the development of new sample preparation treatments involving extraction, cleanup, and enrichment steps of antibiotics in meat samples in combination with sensitive and sophisticated determination techniques that have been carry out in the last years is necessary. Therefore, the aim of this work is to summarize the published methodologies for the determination of antibiotics from 2016 until the beginning of the second semester of 2020. The first part of this review includes an introduction about antibiotic families, followed by sample preparation and determination techniques applied to the different families. Finally, a detailed discussion of the current trends and the future possible perspectives in this field are also included.

Adsorptive removal of enrofloxacin with magnetic functionalized graphene oxide@ metal-organic frameworks employing D-optimal mixture design

A novel sorbent based on a mixture of magnetic functionalized graphene oxide and MOFs was developed to remove enrofloxacin (EFX) from water samples. The prepared sorbent was characterized using Fourier transform infrared spectra, scanning electron microscope images, and X-ray powder diffraction pattern. The sorbent compositions were optimized by the mixture experimental design. Under the optimal condition, the percentages of each sorbent component, including triethylene tetramine-functionalized graphene oxide (FGO), Fe₃ O₄ , and MOF-5, were 40%, 21%, and 39%, respectively. Besides, the intraparticle diffusion and pseudo-second-order kinetic models can describe the EFX adsorption procedure because of two adsorption mechanisms of EFX on FGO and MOF-5. A positive standard enthalpy of 49.80 kJ/mol indicated the EFX adsorption is endothermic with a chemisorption process. The negative values of ΔG^o obtained in the range of -8.979 to -3.431 kJ/mol at all studied temperatures showed that the adsorption process was also spontaneous. The Langmuir and Freundlich isotherm models were analyzed with the partition coefficient to reduce bias in the isotherm model evaluation. The maximum adsorption capacity of 344.83 mg/g and a high partition coefficient of 17.42 g/L in an initial EFX concentration of 10 mg/L were obtained for the EFX removal. PRACTITIONER POINTS: Magnetic functionalized graphene oxide @MOF-5 as a sorbent for the enrofloxacin removal is synthesized. The percentage amount of each component of the sorbent is optimized using the D-optimal mixture design. Adsorption mechanisms of enrofloxacin on magnetic functionalized graphene oxide @MOF-5 are discussed. Thermodynamic parameters for the enrofloxacin adsorption with the sorbents are determined. Isotherm model for the enrofloxacin removal with the sorbent is investigated.

Selective extraction and enhanced-sensitivity detection of fluoroquinolones in swine body fluids by liquid chromatography-high resolution mass spectrometry: Application in long-term monitoring in livestock

To ensure food safety in livestock industries, developing a non-lethal and cost-effective detection method for the long-term monitoring of veterinary antibiotics in animals will be beneficial to avoid unnecessary losses. In this study, a highly-selective extraction using dispersive micro solid-phase extraction method coupled with an enhanced-sensitivity detection by pre-column dilution injection and liquid chromatography-high resolution mass spectrometry was used to determine the restricted fluoroquinolones (FQs) in swine body fluids. The proposed method showed good linear coefficients higher than 0.999, and high sensitivity with the LODs and LOQs in the range of 0.02-0.03 μg/L and 0.06-0.1 μg/L in swine body fluids, respectively. For further evaluation, the adequate recoveries (85.3-112.8%), satisfactory repeatability (intra-day and inter-day precisions of 2.1%-8.2% and 3.8%-13.7%, respectively), and acceptable matrix effect (0.92-1.12) of the FQs were achieved. It has been successfully applied for analysis of the FQs in body fluids without sacrificing animals in the future.

Determination of fluoroquinolones in foods using ionic liquid modified Fe3O4/MWCNTs as the adsorbent for magnetic solid phase extraction coupled with HPLC

In this work, a simple and sensitive method based on Fe₃O₄/multi-walled carbon nanotubes/ionic liquid (Fe₃O₄/MWCNTs/IL) as the adsorbent for magnetic solid phase extraction coupled with high performance liquid chromatography was developed for the determination of trace fluoroquinolones in foods. After a simple one-pot solvothermal synthesis, Fe₃O₄/MWCNTs were further modified with an amine-terminated ionic liquid to enhance their dispersibility and extraction capacity. The morphology, structure and magnetic properties of the composite adsorbent were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction spectrometry and vibrating-sample magnetometry. Under the optimized extraction and detection conditions, the studied fluoroquinolones were enriched effectively and separated well and their UV signals were linear to their concentrations in the range of 4-1000 ng mL^-1, with correlation coefficients ranging from 0.9958 to 0.9990. The enrichment factors were 29.1-43.9 fold and the limits of detection were 0.33-0.78 ng mL^-1. The spiked recoveries were 85.4-105.9% for milk and 85.2-103.7% for pork samples, with relative standard deviations of 0.8-5.7%. The developed method provided a fast, sensitive and reliable determination platform for fluoroquinolones in complex real samples.

Magnetic Graphene Dispersive Solid-Phase Extraction for the Determination of Phthalic Acid Esters in Flavoring Essences by Gas Chromatography Tandem Mass Spectrometry

In the present study, a sensitive, efficient and repeatable method for the simultaneous extraction and determination of 13 types of phthalic acid esters (PAEs) in flavoring essence samples using magnetic graphene solid-phase extraction coupled with gas chromatography tandem mass spectrometry was developed. Due to the unique structure of magnetic graphene, it has several advantages, such as large surface area and fast separation ability. This unique structure not only provided strong magnetic responsiveness for the separation but also prevented the self-aggregation of graphene. The large delocalized p-electron system of graphene can form strong π-stacking interactions with the benzene ring. Thus, graphene may be also a good candidate adsorbent for the adsorption of benzenoid-form compounds. Several magnetic soild-phase extraction parameters, such as elution solvents, amounts of sorbents, enrichment time and desorption time were optimized. The optimized procedures for this method were performed by ultrasonication using ethyl acetate as elution solvent for 5 min. Under the optimal conditions, the developed method provided spiked recoveries of 75.0–105.3% with relative standard deviations of ~5.6% and limits of detection were 0.011–0.091 mg/kg. Good linear relationships were observed with the coefficient of determination (R2) > 0.993 for all the analytes. Finally, the validated method was successfully applied to the analysis of PAEs in real samples.

Use of a magnetic covalent organic framework material with a large specific surface area as an effective adsorbent for the extraction and determination of six fluoroquinolone antibiotics by HPLC in milk sample

A magnetic covalent organic framework material was synthesized with a core-shell structure using a simple solvothermal method. It was prepared with Fe₃ O₄ as the magnetic core, covalent organic framework as the shell, which synthesized from 1,3,5-triformylphloroglucinol and p-phenylenediamine by Schiff base reaction. Transmission electron microscopy, Fourier transform infrared spectroscopy, powder X-ray diffraction, vibrating sample magnetometry, and nitrogen adsorption-desorption were used to characterize magnetic adsorbent. It has showed a large specific surface area (505.6 m² /g), which can provide many adsorption sites. Moreover, the saturation magnetization value was 48.4 emu/g enough to be separated by external magnet. Six kinds of fluoroquinolones (enoxacin, fleroxacin, ofloxacin, norfloxacin, pefloxacin, and lomefloxacin) were extracted by magnetic solid phase extraction with the magnetic adsorbent. High-performance liquid chromatography detects the entire adsorption and desorption process to further evaluate the optimal extraction and desorption conditions. Under the optimal chromatographic conditions, this method showed a low detection limit (0.05 to 0.20 μg/L), good linearity in the range of 0.5 to 200 μg/L, and the enrichment factor reaches 115.5-127.3. The spiked recovery of the fluoroquinolones in milk sample ranged from 90.4 to 101.2%.

Au nanoparticle preconcentration coupled with CE-electrochemiluminescence detection for sensitive analysis of fluoroquinolones in European eel (Anguilla anguilla)

In this work, a novel method based on gold nanoparticle preconcentration coupled with CE for electrochemiluminescence detection of ciprofloxacin, enrofloxacin, ofloxacin, and norfloxacin in European eels was developed. The addition of gold nanoparticles induced the rapid enrichment of fluoroquinolones, which was simpler than the conventional enrichment approaches such as solid phase extraction and solid-phase microextraction. More than 100 times enrichment was observed after gold nanoparticle aggregation-based preconcentration. The CE-electrochemiluminescence parameters that affected the separation and detection were optimized. Under the optimized conditions, the linear ranges for the four fluoroquinolones were 0.090-8.0 μmol L-1 with the detection limits between 0.020 and 0.050 μmol L-1. The proposed approach showed the advantages of high sensitivity, high selectivity, a wide linear range, and a low detection limit. It was used to analyze fluoroquinolones in European eel, and the results showed that the developed method can satisfy the detection requirements for fluoroquinolone determination in aquatic products set by China and the European Union.

NH2-MIL-53(Al) Polymer Monolithic Column for In-Tube Solid-Phase Microextraction Combined with UHPLC-MS/MS for Detection of Trace Sulfonamides in Food Samples

In this study, a novel monolithic capillary column based on a NH2-MIL-53(Al) metal-organic framework (MOF) incorporated in poly (3-acrylamidophenylboronic acid/methacrylic acid-co-ethylene glycol dimethacrylate) (poly (AAPBA/MAA-co-EGDMA)) was prepared using an in situ polymerization method. The characteristics of the MOF-polymer monolithic column were investigated by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, Brunauer-Emmett-Teller analysis, and thermogravimetric analysis. The prepared MOF-polymer monolithic column showed good permeability, high extraction efficiency, chemical stability, and good reproducibility. The MOF-polymer monolithic column was used for in-tube solid-phase microextraction (SPME) to efficiently adsorb trace sulfonamides from food samples. A novel method combining MOF-polymer-monolithic-column-based SPME with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was successfully developed. The linear range was from 0.015 to 25.0 µg/L, with low limits of detection of 1.3-4.7 ng/L and relative standard deviations (RSDs) of < 6.1%. Eight trace sulfonamides in fish and chicken samples were determined, with recoveries of the eight analytes ranging from 85.7% to 113% and acceptable RSDs of < 7.3%. These results demonstrate that the novel MOF-polymer-monolithic-column-based SPME coupled with UHPLC-MS/MS is a highly sensitive, practical, and convenient method for monitoring trace sulfonamides in food samples previously extracted with an adequate solvent.

Fiberoptic-Coupled Spectrofluorometer with Array Detection as a Process Analytical Chemistry Tool for Continuous Flow Monitoring of Fluoroquinolone Antibiotics

Nowadays, there is an increasing need for sensitive real-time measurements of various analytes and monitoring of industrial products and environmental processes. Herein, we describe a fluorescence spectrometer in continuous flow mode in which the sample is fed to the flow cell using a peristaltic pump. The excitation beam is introduced to the sample chamber by an optical fiber. The fluorescence emitted upon excitation is collected at the right angle using another optical fiber and then transmitted to the fluorescence spectrometer which utilizes an array detector. The array detection, as a key factor in process analytical chemistry, made the fluorescence spectrometer suited for multiwavelength detection of the fluorescence spectrum of the analytes. After optimization of the experimental parameters, the system has been successfully employed for sensitive determination of four fluoroquinolone antibiotics such as ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin. The linear dynamic ranges of four fluoroquinolones were between 0.25 and 20 μg·mL-1, and the detection limit of the method for ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin were 81, 36, 35, and 93 ng·mL-1, respectively. Finally, the proposed system is carried out for determination of fluoroquinolones in some pharmaceutical formulations.

High-Throughput and High-Efficient Micro-solid Phase Extraction Based on Sulfonated-Polyaniline/Polyacrylonitrile Nanofiber Mats for Determination of Fluoroquinolones in Animal-Origin Foods

We herein describe a high-throughput 96-well plate micro-solid phase extraction sample preparation technique based on novel sulfonated-polyaniline/polyacrylonitrile nanofiber mats (sulfonated-PANI/PAN NFMs) for multiresidue detection of fluoroquinolones (FQs) in various animal-origin food samples. Through the double-modification of polyaniline and sulfonic acid, the resulting functionalized sulfonated-PANI/PAN NFMs present high extraction efficiency for FQs. Compared with the existing methods, this approach demonstrates its advantages of being suitable for more sample matrices (milk, animal muscle, liver, kidney, and egg), lower sample amount (0.5 g), lower sorbent requirement (5.0 mg), lower volume of organic solvent (0.7 mL), shorter time (0.2 min per sample), and high sensitivity (0.012-0.06 μg·kg^-1). In addition, sulfonated-PANI/PAN NFMs possess excellent reusability which could be reused 10 times without an obvious decrease in extraction efficiency. Combined with ultra performance liquid chromatography-tandem mass spectrometry, the novel sample preparation technique can be expected as an efficient method for routine trace FQ residue monitoring in animal-origin food samples.

Determination of fluoroquinolones in food samples by magnetic solid-phase extraction based on a magnetic molecular sieve nanocomposite prior to high-performance liquid chromatography and tandem mass spectrometry

In this study, a magnetic molecular sieve material (Fe₃O₄@MCM-48) was synthesized by a combination of solvothermal and self-assembly methods. The physicochemical properties of the magnetic molecular sieve material were characterized by scanning electron microscopy, energy-dispersive spectroscopy, magnetic hysteresis loop measurements, transmission electron microscopy, powder X-ray diffraction, N₂ adsorption-desorption analysis, and Fourier transform infrared spectroscopy. The as-synthesized nanocomposite showed various advantages, including easy magnetic-assisted separation, high specific surface area, and a highly interwoven and branched mesoporous structure. The Fe₃O₄@MCM-48 nanocomposite was then used as an effective adsorbent material for magnetic solid-phase extraction of fluoroquinolones (FQs) from water samples. The FQs in the extract were determined via liquid chromatography-tandem mass spectrometry. Adsorption and desorption factors that affected the extraction performance were systematically optimized using spiked purified water samples. Good linearity (with R² > 0.99) was shown by this FQ detection system for FQ concentrations from 5 to 1000 ng L^-1. Moreover, low detection limits (0.7-6.0 ng L^-1) and quantitation limits (2.5-20.0 ng L^-1) and satisfactory repeatability (relative standard deviation < 10%, n = 6) were achieved for water samples. The developed method was also validated for the analysis of FQs in meat and milk samples. Finally, FQs in food and drinking water samples were successfully determined using the developed method. Graphical abstract.