Bionic multi-tentacled ionic liquid-modified silica gel for adsorption and separation of polyphenols from green tea ( Camellia sinensis ) leaves

Facile engineering of mesoporous silica for the effective removal of anionic dyes from wastewater: Insights from DFT and experimental studies

The discharge of dye effluents from the textile industries has become a major environmental issue due to its potential to impart serious harm to human health and aquatic life. Mesoporous silica due to its high chemical stability, large surface area, tunable morphologies, large pore volume and pore size and cost-effectiveness is commonly used to remove such dyes before recycling of the wastewater for agricultural, domestic, and industrial applications. However, the low colloidal stability, the fast aggregation of the silica particles and the slow etching of the silica surface often results in the fast deactivation of the adsorbents and limits their long-term applications. In this study, we report the functionalization of mesoporous silica (SBA-15) with ZnO nanoparticles for the effective removal of anionic dyes. The Zn-silica exhibited highly positive surface with a dipole moment of 172 Debye and high charge transfer efficacy with an energy bandgap (ΔE) of 3.35 eV as revealed by quantum chemical DFT simulations. It achieved excellent removal of Alizarin red dye reaching a removal efficiency of 99.99 % and an adsorption capacity of 50 mg/g. In the presence of heavy metal ions commonly present in wastewater (Cd2+, Co2+, Zn2+, Ni2+, Cu2+ and Hg2+), the Zn-silica maintain excellent stability, high selectivity, and reusability within 5 cycles without a significant decline in efficiency. This study thus presents an effective way of wastewater purification on cost-effective adsorbents for meeting the water scarcity demands.

Natural Rubber/Hexagonal Mesoporous Silica Nanocomposites as Efficient Adsorbents for the Selective Adsorption of (-)-Epigallocatechin Gallate and Caffeine from Green Tea

(-)-Epigallocatechin gallate (EGCG) is a bioactive component of green tea that provides many health benefits. However, excessive intake of green tea may cause adverse effects of caffeine (CAF) since green tea (30-50 mg) has half the CAF content of coffee (80-100 mg). In this work, for enhancing the health benefits of green tea, natural rubber/hexagonal mesoporous silica (NR/HMS) nanocomposites with tunable textural properties were synthesized using different amine template sizes and applied as selective adsorbents to separate EGCG and CAF from green tea. The resulting adsorbents exhibited a wormhole-like silica framework, high specific surface area (528-578 m2 g-1), large pore volume (0.76-1.45 cm3 g-1), and hydrophobicity. The NR/HMS materials adsorbed EGCG more than CAF; the selectivity coefficient of EGCG adsorption was 3.6 times that of CAF adsorption. The EGCG adsorption capacity of the NR/HMS series was correlated with their pore size and surface hydrophobicity. Adsorption behavior was well described by a pseudo-second-order kinetic model, indicating that adsorption involved H-bonding interactions between the silanol groups of the mesoporous silica surfaces and the hydroxyl groups of EGCG and the carbonyl group of CAF. As for desorption, EGCG was more easily removed than CAF from the NR/HMS surface using an aqueous solution of ethanol. Moreover, the NR/HMS materials could be reused for EGCG adsorption at least three times. The results suggest the potential use of NR/HMS nanocomposites as selective adsorbents for the enrichment of EGCG in green tea. In addition, it could be applied as an adsorbent in the filter to reduce the CAF content in green tea by up to 81.92%.

Exploring the Absorption Mechanisms of Imidazolium-Based Ionic Liquids to Epigallocatechin Gallate

Imidazolium-based ionic liquids are wildly used in natural product adsorption and purification. In this work, one typical polymeric ionic liquid (PIL) was synthesized by using L-proline as the anion, which exhibited excellent adsorption capacity toward tea polyphenol epigallocatechin gallate (EGCG). The adsorption conditions were optimized with the response surface method (RSM). Under the optimum conditions, the adsorption capacity of the PIL for EGCG can reach as high as 552 mg/g. Dynamics and isothermal research shows that the adsorption process of EGCG by the PIL particularly meets the quasi-second-order kinetic equation and monolayer adsorption mechanism. According to thermodynamic parameter analysis, the adsorption process is endothermic and spontaneous. The results of theoretical calculation by molecular docking also demonstrated the interaction mechanisms between EGCG and the ionic liquid. Considering the wide application of imidazolium-based ionic liquids in component adsorption and purification, the present study can not only be extended to other similar experimental mechanism validation, but also be representative for guiding the synthesis of PIL and optimization of adsorption conditions.

Ionic liquid based composites: A versatile materials for remediation of aqueous environmental contaminants

Water pollution is one of the most aggravated problems threatening the sustainability of human race and other life forms due to the rapid pace of civilization and industrialization. A long history exists of release of hazardous pollutants into the water bodies due to selfish human activities since the Industrial Revolution, but no effort has been completely successful in curbing the activities that result in the degradation of our environment. These pollutants are harmful, carcinogenic and have adverse health effects to all forms of life. Thus, remarkable efforts have been geared up to obtain clean water by exploiting science and technology. The application of Ionic liquids (ILs) as sustainable materials have received widespread attention since the last decade. Their interesting properties, simplicity in operation and satisfactory binding capacities in elimination of the contaminants makes them a valuable prospect to be utilized in wastewater treatment. Immobilizing and grafting the solid supports with ILs have fetched efficient results to exploit their potential in the adsorptive removal processes. This review provides an understanding of the recent developments and outlines the possible utility of IL based nano adsorbents in the removal of organic compounds, dyes and heavy metal ions from aqueous medium. Effect of several parameters such as sorbent dosage, pH and temperature on the removal efficiency has also been discussed. Moreover, the adsorption isotherms, thermodynamics and mechanism are comprehensively studied. It is envisioned that the literature gathered in this article will guide the budding scientists to put their interest in this area of research in the days to come.

The Use of Modified Fe3O4 Particles to Recover Polyphenolic Compounds for the Valorisation of Olive Mill Wastewater from Slovenian Istria

Olive mill waste water (OMWW), a by-product created during the processing of olive oil, contains high amounts of polyphenolic compounds. If put to further use, these polyphenolic compounds could be a valuable resource for the speciality chemical industry. In order to achieve this, isolation of the polyphenolic compounds from OMWW is needed. Several techniques for this process already exist, the most widely used of which is adsorption beds. This research describes new ways of collecting polyphenolic compounds by using unmodified iron oxide (Fe₃O₄) particles and Fe₃O₄ modified with silica gel (Fe₃O₄@C18), citric acid (Fe₃O₄@CA), and sodium dodecyl sulphate (Fe₃O₄@SDS). This approach is superior to adsorption beds since it can be used in a continuous system without clogging, while the nano-sized shapes create a high surface area for adsorption. The results of this study show that, if used in a loop system of several adsorption and desorption cycles, (un)modified Fe₃O₄ has the potential to collect high concentrations of polyphenolic compounds. A combination of different modifications of the Fe₃O₄ particles is also beneficial, as these combinations can be tailored to allow for the removal of specific polyphenolic compounds.

A systematic comparison of the extraction and adsorption of theophylline by new amino acid ester-based ionic liquids

The selective extraction and adsorption of theophylline with a new amino acid ester-based ionic liquid was demonstrated, and a systematic comparison was made for future applications.

Current extraction, purification, and identification techniques of tea polyphenols: An updated review

Tea, as a beverage, has been reputed for its health benefits and gained worldwide popularity. Tea polyphenols, especially catechins, as the main bioactive compounds in tea, exhibit diverse health benefits and have wide applications in the food industry. The development of tea polyphenol-incorporated products is dependent on the extraction, purification, and identification of tea polyphenols. Recent years, many green and novel extraction, purification, and identification techniques have been developed for the preparation of tea polyphenols. This review, therefore, introduces the classification of tea and summarizes the main conventional and novel techniques for the extraction of polyphenols from various tea products. The advantages and disadvantages of these techniques are also intensively discussed and compared. In addition, the purification and identification techniques are summarized. It is hoped that this updated review can provide a research basis for the green and efficient extraction, purification, and identification of tea polyphenols, which can facilitate their utilization in the production of various functional food products and nutraceuticals.

[Research progress in application of immobilized ionic liquid materials to separation by solid-phase extraction]

Ionic liquids are low-temperature molten salts with almost no vapor pressure, and they are composed of organic cations and inorganic anions. Ionic liquids are characterized by the properties of good chemical stability, high solubility, designable structure, high conductivity and so on. The physicochemical properties of an ionic liquid depend on the nature and size of the cation and anion, which confer unique characteristics; hence, these reagents are also termed "designed extractants." As a new class of green solvents, ionic liquids are potential replacements to traditional volatile organic solvents used for extraction; for this reason, ionic liquids have attracted the attention of scientists. Research on the methods of preparation and applications of ionic liquids is being diversified, and they are extensively used in catalytic chemistry, photoelectron chemistry, materials chemistry, analytical chemistry, etc. By functional guiding design, the structures of ionic liquids, especially the imidazole ring cations, can be easily grafted with active groups such as hydroxyl, amino, carboxyl, and cyano groups, so that interactions between the ionic liquids and target molecules can be promoted via the formation of π-π bonds, hydrogen bonds, ionic bonds, and van der Waals forces. In addition, ionic liquids can be readily immobilized on solid carriers by physical or chemical means in order to obtain a new solid material with ionic liquids embedded internally or decorated on the surface. Furthermore, ionic liquids could be converted into ionic liquid-immobilized composite materials by impregnation, grafting, etc. The resulting composites not only suffer minimal loss of ionic liquids but also retain the typical characteristics of the ionic liquids and solid materials, thus showing improved mass transfer performance and better adsorption performance. Immobilized materials are characterized by high enrichment efficiency, high adsorption capacity, good stability, and strong extraction selectivity, as well as the presence of numerous recognition sites and high utilization rate of ionic liquids. In recent years, they have been widely used as solid-phase extraction adsorption materials for the separation of small organic molecules. This review introduces common immobilization methods and the characteristics of ionic liquid-immobilized materials, as well as their application in solid-phase extraction. In this paper, methods for the immobilization of ionic liquids with solid carriers such as silica gel, molecular sieves, molecularly imprinted polymers, graphene oxide, and magnetic nanomaterials are summarized, and the application of ionic liquid-immobilized materials in solid-phase extraction is reviewed. The target substances include alkaloids, flavonoids, polyphenols, and other natural active components as well as common drug molecules, organic pesticides, and other organic small molecular compounds. The properties, applications, and separation mechanisms of ionic liquids immobilized with various carriers are systematically introduced. Literature survey shows that the distribution of the binding active sites of ionic liquid-immobilized materials to the target molecules is more uniform, which increases the adsorption capacity of the materials. The adsorption efficiency of ionic liquid-immobilized materials is related to the type of ionic liquid, amount of adsorption material, concentration of the sample solution, adsorption temperature, solution pH, flow rate of the eluent, and type and amount of the eluting solvent. The existing disadvantages of ionic liquids, such as simple structures, insufficient basic theoretical research, and unsatisfactory extraction degree in complex matrixes would also be discussed. The corresponding solutions would be presented with the aim of providing guidance for the application of ionic liquid-immobilized materials in the separation and analysis of targets in complex matrices, thus paving the way for a new direction in the field of extraction and separation.

Ionic liquid@β-cyclodextrin-gelatin composite membrane for effective separation of tea polyphenols from green tea

A new kind of multi-component membrane was prepared by combining gelatin solution, porogen and an inclusion complex of ionic liquid (IL) and beta-cyclodextrin (β-CD) in a simple physical manner for selective separation of tea polyphenols (TPs) from green tea crude extracts. After screening, it was found that the resulting membrane containing the IL of dicationic N-vinylimidazole proline salt ([VIm]₂C₃[l-pro]₂) had the excellent performance for the enrichment of the target molecules. Then the newly-developed film was comprehensively characterized by scanning electron microscopy, conductivity, thermogravimetry and spectral analysis. Under pressure driving, the adsorption from an aqueous solution of a mixture of TPs and theophylline on IL@β-CD-Gel membrane showed that the adsorption capacity for TPs was 303.45 mg/g with removal percentages of 94.38%. The experimental data fit well with pseudo-second-order model and Freundlich model. By using this composite material, a new technology of membrane separation for selective adsorption of TPs was finally established.

Synthesis of a New Imidazole Amino Acid Ionic Liquid Polymer and Selective Adsorption Performance for Tea Polyphenols

A series of imidazolium ionic liquid monomers with L-Proline anions (ViImCn-L-Pro and (ViIm)2Cn(L-Pro)2) were firstly synthesized, after which new copolymer materials were prepared by polymerization of the ionic liquid monomers with N,N′-methylene diacrylamide (MBA). Polymerization conditions, including the ratio of Ils(ViImC_n-L-Pro or (ViIm)₂C_n(L-Pro)₂) and MBA, solvent, ionic liquids and initiator’s amount, were investigated and found to have an important effect on the adsorption capacity. Polymerization conditions were shown to have more significant impacts on adsorption capacities in the following order: the ratio of Ils and MBA > the amount of initiator > ionic liquids > solvent. The polymers were characterized by IR, EA, SEM, particle size distribution and TG. One of the polymers exhibited the highest selective adsorption capacity of tea polyphenols (521 mg/g). which was significantly higher than other adsorption media. The absorbed tea polyphenols could be desorbed readily with 2% hydrochloric acid methanol solution as eluent. The polymer material could maintain a higher adsorption capacity after four reuses. Based on this polymer, a new method for the efficient separation of tea polyphenols from tea water could be developed.

Signal optimized rough silver nanoparticle for rapid SERS sensing of pesticide residues in tea

Trace detection of toxic chemicals in foodstuffs is of great concern in recent years. Surface-enhanced Raman scattering (SERS) has drawn significant attention in the monitoring of food safety due to its high sensitivity. This study synthesized signal optimized flower-like silver nanoparticle-(AgNP) with EF at 25 °C of 1.39 × 10⁶ to extend the SERS application for pesticide sensing in foodstuffs. The synthesized AgNP was deployed as SERS based sensing platform to detect methomyl, acetamiprid-(AC) and 2,4-dichlorophenoxyacetic acid-(2,4-D) residue levels in green tea via solid-phase extraction. A linear correlation was twigged between the SERS signal and the concentration for methomyl, AC and 2,4-D with regression coefficient of 0.9974, 0.9956 and 0.9982 and limit of detection of 5.58 × 10^-4, 1.88 × 10^-4 and 4.72 × 10^-3 µg/mL, respectively; the RSD value < 5% was recorded for accuracy and precision analysis suggesting that proposed method could be deployed for the monitoring of methomyl, AC and 2,4-D residue levels in green tea.

Materials for Solid-Phase Extraction of Organic Compounds

This review provides an overview of the most recent developments involving materials for solid-phase extraction applied to determine organic contaminants. It mainly concerns polymer-based sorbents that include high-capacity, as well as selective sorbents, inorganic-based sorbents that include those prepared using sol-gel technology along with structured porous materials based on inorganic species, and carbon nanomaterials, such as graphene and carbon nanotubes. Different types of magnetic nanoparticles coated with these materials are also reviewed. Such materials, together with their main morphological and chemical features, are described, as are some representative examples of their application as solid-phase extraction materials to extract organic compounds from different types of samples, including environmental water, biological fluids, and food.

An ionic liquid functionalized polymer for simultaneous removal of four phenolic pollutants in real environmental samples

An ionic liquid functionalized polymer (IL-P) was prepared feasibly and simply by grafting1-butyl-3-vinylimidazolium bromide onto the silica surface. The IL-P was fully characterized, and the results showed that IL-P has a rough surface with a lower specific surface area (205.49 m² g^-1), and the involvement of ionic liquid significantly improved the adsorption performance of IL-P. The pH, initial concentration, adsorption time and temperature were investigated to discuss the adsorption behaviors of IL-P in aqueous solution. The adsorption process of 2,4-dichlorophenol (2,4-DCP), bisphenol A (BPA) and 2,4-dinitrophenol (2,4-DNP) onto IL-P better fitted the pseudo-second-order model, while that of 2-isonaphthol (2-NP) followed the pseudo-first-order model. The adsorption behaviors of IL-P towards 2,4-DCP and 2,4-DNP fitted well with Liu isotherm model, and that of BPA and 2-NP can be described by Langmuir model. The maximum adsorption capacities of 2,4-DCP, BPA, 2,4-DNP and 2-NP bound on IL-P was 239.7, 68.39, 56.86 and 64.28 mg g^-1, respectively, and the adsorption of IL-P is a spontaneous physical process. Comparing with other adsorbent, the as-prepared IL-P showed excellent recognition ability towards the phenolic compounds and can be applied to adsorb and remove trace 2,4-DCP, 2-NP, 2,4-DNP and BPA simultaneously in complicated wastewater and soil samples.

Simultaneous Separation of Antioxidants and Carbohydrates From Food Wastes Using Aqueous Biphasic Systems Formed by Cholinium-Derived Ionic Liquids

The food industry produces significant amounts of waste, many of them rich in valuable compounds that could be recovered and reused in the framework of circular economy. The development of sustainable and cost-effective technologies to recover these value added compounds will contribute to a significant decrease of the environmental footprint and economic burden of this industry sector. Accordingly, in this work, aqueous biphasic systems (ABS) composed of cholinium-derived bistriflimide ionic liquids (ILs) and carbohydrates were investigated as an alternative process to simultaneously separate and recover antioxidants and carbohydrates from food waste. Aiming at improving the biocompatible character of the studied ILs and proposed process, cholinium-derived bistriflimide ILs were chosen, which were properly designed by playing with the cation alkyl side chain and the number of functional groups attached to the cation to be able to create ABS with carbohydrates. These ILs were characterized by cytotoxicity assays toward human intestinal epithelial cells (Caco-2 cell line), demonstrating to have a significantly lower toxicity than other well-known and commonly used fluorinated ILs. The capability of these ILs to form ABS with a series of carbohydrates, namely monosaccharides, disaccharides and polyols, was then appraised by the determination of the respective ternary liquid-liquid phase diagrams at 25°C. The studied ABS were finally used to separate carbohydrates and antioxidants from real food waste samples, using an expired vanilla pudding as an example. With the studied systems, the separation of the two products occurs in one-step, where carbohydrates are enriched in the carbohydrate-rich phase and antioxidants are mainly present in the IL-rich phase. Extraction efficiencies of carbohydrates ranging between 89 and 92% to the carbohydrate-rich phase, and antioxidant relative activities ranging between 65 and 75% in the IL-rich phase were obtained. Furthermore, antioxidants from the IL-rich phase were recovered by solid-phase extraction, and the IL was recycled for two more times with no losses on the ABS separation performance. Overall, the obtained results show that the investigated ABS are promising platforms to simultaneously separate carbohydrates and antioxidants from real food waste samples, and could be used in further related applications foreseeing industrial food waste valorization.

The Protective Effects of Green Tea Catechins in the Management of Neurodegenerative Diseases: A Review

BACKGROUND

The therapeutic strategies to manage neurodegenerative diseases remain limited and it is necessary to discover new agents for their prevention and control. Oxidative stress and inflammation play a main role in the pathogenesis of neurodegenerative diseases. The aim of this study is to review the effects of green tea catechins against the Neurodegenerative Diseases.

METHODS

In this study, we extensively reviewed all articles on the terms of Green tea, catechins, CNS disorders, and different diseases in PubMed, Science Direct, Scopus, and Google Scholar databases between the years 1990 and 2017.

RESULTS

The present study found that catechins, the major flavonoids in green tea, are powerful antioxidants and radical scavengers which possess the potential roles in the management of neurodegenerative diseases. Catechins modulate the cellular and molecular mechanisms through the inflammation-related NF-κB and the nuclear factor erythroid 2-related factor 2 (Nrf2) signaling pathways.

CONCLUSION

The findings of the present review shows catechins could be effective against neurodegenerative diseases due to their antioxidation and anti-inflammation effects and the involved biochemical pathways including Nrf2 and NF-kB signaling pathways.

Synthesis, characterization and properties of tropine-based ionic liquids gels

Hydrophilic ionic liquid (IL) gels based-on tropine as a potential separation material.

Mono and co-immobilization of imidazolium ionic liquids on silica: effects of the substituted groups on the adsorption behavior of 2,4-dinitrophenol

Ionic liquid modified silicas with high adsorption capacity for phenols prompt us to deeply explore the contribution of interactions between the adsorbent and adsorbate, with a particular focus on hydrophobicity, π–π, electrostatic and acid–base interactions. Herein, by introducing a series of typical substituent groups including N,N-dimethylaminopropyl (A), benzyl (B), dodecyl (D) and naphthylmethyl (N) in an imidazole ring (Im), three mono-immobilized and two co-immobilized imidazolium ionic liquid modified silicas, namely SilprAImCl, SilprBImCl, SilprNImCl, SilprDBImCl and SilprDAImCl, werre synthesized for removal and recovery of 2,4-dinitrophenol (2,4-DNP) from aqueous solutions. Adsorption kinetics, isotherms, thermodynamic analysis and desorption experiments have been carried out. The experimental results reveal that the substituent groups such as N,N-dimethylaminopropyl, benzyl and naphthylmethyl on the imidazole ring can significantly enhance the adsorption of 2,4-DNP via the acid–base interaction or π–π interaction and the adsorption capacity of 2,4-DNP follows the order: SilprNImCl > SilprAImCl > SilprBImCl. Furthermore, SilprDBImCl exhibits the largest adsorption capacity and SilprDAImCl has the lowest among the five adsorbents. These interesting finds indicate that the combination of hydrophobicity and π–π interactions lead to enhanced adsorption performance towards 2,4-DNP, while the combination of the hydrophobicity and acid–base interactions can restrain greatly adsorption of 2,4-DNP from aqueous medium. Adsorption mechanisms of 2,4-DNP on the five adsorbents have been clarified. These results will provide a deeper insight for efficient removal of phenols from water environments.

Ionic liquid modified silicas with high adsorption capacity for phenols prompt us to deeply explore the contribution of interactions between the adsorbent and adsorbate, with a particular focus on hydrophobicity, π–π, electrostatic and acid–base interactions.

Highly selective adsorption of hydroquinone by hydroxyethyl cellulose functionalized with magnetic/ionic liquid

Magnetic hydroxyethyl cellulose/ionic liquid (MHEC/IL) materials were fabricated through a facile and fast process and their application as excellent adsorbents for hydroquinone was also demonstrated. The thermal stability, chemical structure and magnetic property of the MHEC/IL were characterized by the Scanning electron microscope (SEM), Transmission Electron Microscope (TEM), Fourier transform infrared spectrometer (FT-IR) and X-ray diffraction (XRD), respectively. The adsorbents were used for the removal of hydroquinone from simulated wastewater with a fast solid-liquid separation in the presence of external magnetic field. The influence of various analytical parameters on the adsorption of hydroquinone such as pH, contact time and initial ion concentration were studied in detail. The results showed that the maximum adsorption capacity was 335.68mgg^-1, observed at pH 5 and temperature 30°C. Equilibrium adsorption was achieved within 30min. The kinetic data, obtained at the optimum pH 5, could be fitted with a pseudo-second order equation. Adsorption process could be well described by Freundlich adsorption isotherms. The obtained results indicated that the impregnation of the room temperature IL significantly enhances the removal efficiency of hydroquinone. The MHEC/IL may be suitable materials in phenols pollution cleanup if they are synthesized in largescale and at low price in near future.