Synthesis of magnetic graphene/mesoporous silica composites with boronic acid-functionalized pore-walls for selective and efficient residue analysis of aminoglycosides in milk

Boronic acid-functionalized magnetic covalent organic frameworks based solid-phase extraction coupled with hydrophilic interaction chromatography-tandem mass spectrometry for the determination of trace gentamicin residues in milk

Boric acid-functionalized magnetic covalent organic frameworks (Fe3O4-TpBD-B) with large surface area and high porosity were prepared and applied for magnetic solid-phase extraction adsorbent of gentamicin from milk before UPLC-MS/MS detection. By utilizing a new HILIC chromatographic column with zwitterionic sulfoalkyl betaine stationary phase based on ethyl bridged hybrid particles (BEH), isomers of gentamicin (C1, C1a, and C2+C2a components). The developed methods demonstrated good linearity (R2 > 0.99), acceptable accuracy and good precision (<10 %), and low limit of quantitation (1.59 ng mL⁻1 for C1, 1.52 ng mL⁻1 for C1a and 2.72 ng mL⁻1 for C2+C2a). In addition, this method has been effectively applied to the analysis of real milk samples.

A pH/ROS-responsive antioxidative and antimicrobial GelMA hydrogel for on-demand drug delivery and enhanced osteogenic differentiation in vitro

Long-term inflammation, including those induced by bacterial infections, contributes to the superfluous accumulation of reactive oxygen species (ROS), further aggravating this condition, decreasing the local pH, and adversely affecting bone defect healing. Conventional drug delivery scaffold materials struggle to meet the demands of this complex and dynamic microenvironment. In this work, a smart gelatin methacryloyl (GelMA) hydrogel was synthesized for the dual delivery of proanthocyanidin and amikacin based on the unique pH and ROS responsiveness of boronate complexes. Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated the co-crosslinking of two boronate complexes with GelMA. The addition of the boronate complexes improved the mechanical properties, swelling ratio, degradation kinetics and antioxidative properties of the hydrogel. The hydrogel exhibited pH and ROS responses and a synergistic control over the drug release. Proanthocyanidin was responsively released to protect mouse osteoblast precursor cells from oxidative stress and promote their osteogenic differentiation. The hydrogel responded to pH changes and released sufficient amikacin in a timely manner, thereby exerting an efficient antimicrobial effect. Overall, the hydrogel delivery system exhibited a promising strategy for solving infectious and inflammatory problems in bone defects and promoting early-stage bone healing.

An integrated methodology for quality assessment of therapeutic antibodies with potential long circulation half-life in harvested cell culture fluid using FcRn immobilized hydrophilic magnetic graphene

Designing modified therapeutic antibodies with enhanced FcRn-binding affinity holds promise in the extension of circulation half-lives and potential refinement of pharmacokinetics. During the development of these new-generation therapeutic antibodies, FcRn binding affinity of IgGs is emphasized and monitored as a critical quality attribute (CQA), alongside other critical assessments including titer and aggregation level. However, the traditional workflow for assessing the overall quality of expressed IgGs in harvested cell culture fluid (HCCF) is blamed to be cumbersome and time-consuming. This study presents an integrated methodology for the rapid quality assessment of IgGs in HCCF by selectively extracting IgGs with favorable high FcRn affinity for subsequent analysis using size exclusion chromatography (SEC). The approach utilizes innovative adsorbents known as FcRn immobilized hydrophilic magnetic graphene (MG@PDA@PAMAM-FcRn) in a magnetic solid-phase extraction (MSPE) process. To simulate the in vivo binding dynamics, MSPE binding and dissociation was performed at pH 6.0 and 7.4, respectively. The composite have demonstrated enhanced extraction efficiency and impurity removal ability in comparison to commercially available magnetic beads. The SEC monomer peak area value provides the output of this method, the ranking of which enabled the facile identification of superior HCCF samples with high overall quality of IgG. Optimization of MSPE parameters was performed, and the method was validated for specificity, precision, sensitivity, and accuracy. The proposed method exhibited an analytical time of 0.6 h, which is 7-22 times shortened in comparison to the conventional workflow.

Preparation of restricted-access boronate affinity adsorbent with excellent anti-protein adsorption property for directly extracting small cis-diol molecules from biological matrices

Boronate affinity adsorbents are of great promise in the enrichment of small cis-diol-containing molecules (cis-diols) from biological matrices. This work develops a restricted-access boronate affinity mesoporous adsorbent, in which boronate sites are only distributed on the internal surface of mesopores and the external surface is a strongly hydrophilic layer. The adsorbent has high binding capacities (30.3 mg g-1, 22.9 mg g-1 and 14.9 mg g-1 for dopamine, catechol and adenosine, respectively) in spite of removal of the boronate sites on the external surface of adsorbent. The adsorption specific of adsorbent towards cis-diols was assessed by dispersive solid-phase extraction (d-SPE) method, and the results show that the adsorbent can selectively extract small cis-diols in the biosamples while exclude proteins completely. Under the optimal d-SPE, the nucleosides and cis-diol drugs in human serum were successfully analyzed by coupling d-SPE with high-performance liquid chromatography. Where, the detection limits are between 6.1 and 13.4 ng mL-1 for four nucleosides, and 24.9 and 34.3 ng mL-1 for two cis-diol drugs; the relative recoveries of all the analytes vary from 84.1% to 110.1% (RSDs <13.4%, n = 6). The results indicate that the adsorbent can directly treat the real biosamples without the necessary protein precipitation steps in advance, thus simplifying the analysis process.

Residue analysis of 10 aminoglycoside antibiotics in aquatic products by multiwalled carbon nanotubes combined with mixed-mode ion exchange liquid chromatography-tandem mass spectrometry

An ultra-high-performance liquid chromatography-tandem mass spectrometry method was developed for simultaneous determination of 10 kinds of aminoglycosides in edible parts of aquatic products. The samples were extracted with 10 mmol/L potassium dihydrogen phosphate buffer solution, then the pH value of the extract was adjusted to neutral by sodium hydroxide. Half volume of the extract was loaded onto multiwalled carbon nanotubes cartridge. All the target compounds were separated on a mixed-mode ion exchange column and detected by ultra-high-performance liquid chromatography-tandem mass spectrometry with electrospray in the positive ionization mode. Under optimized conditions, this method had a good linearity with a squared correlation coefficient > 0.999. For neomycin, the limit of detection and limit of quantification were 5.0 μg/kg and 10.0 μg/kg, respectively; for hygromycin B and apramycin, values were 2.0 μg/kg and 5.0 μg/kg, respectively; for the other seven kinds of aminoglycosides, values were 1.0 μg/kg and 2.0 μg/kg, respectively. The average recoveries presented 75.8%-107.2% with intra- and interday reproducibility ranging between 3.8% and 12.5%. The method was rapid with good separation and sharp peak shapes, had the characteristicsis of high accuracy and good precision, and was suitable for simultaneous determination of 10 kinds of aminoglycosides in aquatic products.

Mesoporous Silica Nanoparticles for the Uptake of Toxic Antimony from Aqueous Matrices

Contamination of water sources by toxic antimony Sb(III) ions poses a threat to clean water supplies. In this regard, we have prepared a mesoporous silica nanoparticle (MSN)-derived adsorbent by reverse microemulsion polymerization, using cetyltrimethylammonium chloride (CTAC) and triethanolamine (TEA) as co-templates. The physical and chemical properties were characterized using advanced tools. The MSN exhibits a higher surface area of up to 713.72 m2·g-1, a pore volume of 1.02 cm3·g-1, and a well-ordered mesoporous nanostructure with an average pore size of 4.02 nm. The MSN has a high adsorption capacity for toxic Sb(III) of 27.96 mg·g-1 at pH 6.0 and 298 K. The adsorption data followed the Langmuir isotherm, while the kinetics of adsorption followed the pseudo-second-order model. Interestingly, the effect of coexisting iron showed a promoting effect on Sb(III) uptake, while the presence of manganese slightly inhibited the adsorption process. The recyclability of the MSN adsorbent was achieved using a 0.5 M HCl eluent and reused consecutively for three cycles with a more than 50% removal efficiency. Moreover, the characterization data and batch adsorption study indicated physical adsorption of Sb(III) by mesopores and chemical adsorption due to silicon hydroxyl groups.

Triblock copolymer–grafted restricted access materials with zwitterionic polymer outer layers for highly efficient extraction of fluoroquinolones and exclusion of proteins

High-selectivity and high-exclusion restricted access materials (RAMs) benefit the analysis of biological samples. Herein, triblock copolymer-functionalized poly(4-vinylbenzyl chloride-co-divinylbenzene) (P_VBC/DVB) microspheres were prepared via the sequential surface-initiated atom radical polymerization of hydrophobic styrene (St), ionic vinylimidazole (VIm), and zwitterionic sulfobetaine methacrylate (SBMA), affording RAMs with multiple interaction-adsorption sites and zwitterionic polymer exclusion sites on the internal and external surfaces of P_VBC/DVB. The preferential extraction of fluoroquinolones (FQs) is realized based on the hydrophobic/π-π/ion exchange interactions due to the grafted poly-St-VIm, and the zwitterionic poly-SBMA block in the triblock copolymers can efficiently exclude various proteins. A sensitive detection method for FQs in chicken was established by solid phase extraction with RAMs as adsorbent combined with UPLC-MS/MS, achieving wide linearity (2.0-200.0 ng mL^-1), low limit of detection (0.5 μg kg^-1) and limit of quantification (1.5 μg kg^-1), and good inter- and intraday precision with satisfactory recoveries (104.1%-117.7% and 115.3%-121.2% with RSDs < 12%).

Hierarchical Macroporous Agarose Materials with Polyethyleneimine-Assisted Multiple Boronate Affinity Binding Sites for the Separation of Neomycin

Quantification of neomycin residues in food samples demands an efficient purification platform. Herein, hierarchical macroporous agarose monoliths with multiple boronate affinity sites were established for selective separation of neomycin. The silica core was synthesized by "one-step" Stöber procedures followed by modification with amino group and incorporation of polyethyleneimine. A versatile macroporous agarose monolith was prepared by emulsification strategies and functionalized with epoxy groups. After introducing polyethyleneimine-integrated silica nanoparticles onto the agarose monolith, fluorophenylboronic acids were immobilized. The physical and chemical characteristics of the composite monolith were analyzed systematically. After optimization, neomycin showed high binding ability of 23.69 mg/g, and the binding capacity can be manipulated by changing the pH and adding monosaccharides. The composite monolith was subsequently utilized to purify neomycin from the spiked model aquatic products followed by high-performance liquid chromatography analysis, which revealed a remarkable neomycin purification effect, indicating the great potential in the separation of neomycin from complicated aquatic products.

Affinity-Based Analysis Methods for the Detection of Aminoglycoside Antibiotic Residues in Animal-Derived Foods: A Review

With the increasingly serious problem of aminoglycoside antibiotic residues, it is imperative to develop rapid, sensitive and efficient detection methods. This article reviews the detection methods of aminoglycoside antibiotics in animal-derived foods, including enzyme-linked immunosorbent assay, fluorescent immunoassay, chemical immunoassay, affinity sensing assay, lateral flow immunochromatography and molecular imprinted immunoassay. After evaluating the performance of these methods, the advantages and disadvantages were analyzed and compared. Furthermore, development prospects and research trends were proposed and summarized. This review can serve as a basis for further research and provide helpful references and new insights for the analysis of aminoglycoside residues. Accordingly, the in-depth investigation and analysis will certainly make great contributions to food safety, public hygiene and human health.

Recent advances of ordered mesoporous silica materials for solid-phase extraction

This review mainly focuses on the development and application of ordered mesoporous silica materials for solid-phase extraction in recent years. It overviews not only bare mesoporous silica but also the functionalized mesoporous silica with organic groups, molecularly imprinted polymers, and magnetic materials. These mesoporous silica materials were used as the extraction adsorbents in cartridge solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction and matrix solid phase dispersion. Coupled with atomic emission spectrometry, chromatography or other detection methods, these techniques efficiently extracted and sensitively determined various targets, such as metal ions, perfluorocarboxylic acids, pesticides, drugs, endocrine disruptors, phenols, flavanones, polycyclic aromatic hydrocarbons, parabens and so on. Based on unique advantages of mesoporous silica materials, the developed analytical method successfully analyzed different matrix samples, like environmental water samples, soil samples, food samples, biological samples and cosmetics. In addition, the prospects of these materials in solid-phase extraction are presented, which can offer an outlook for the further development and applications.

Multi-class, multi-residue determination of 132 veterinary drugs in milk by magnetic solid-phase extraction based on magnetic hypercrosslinked polystyrene prior to their determination by high-performance liquid chromatography-tandem mass spectrometry

A quantitative multi-class multi-residue analytical method was developed for the determination of veterinary drugs in milk by high-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS). A total of 132 veterinary drugs investigated belonged to almost 15 classes including sulfonamides, β-lactams, tetracyclines, quinolones, macrolides, nitrofurans, nitroimidazoles, phenicols, lincosamides, pleuromutilins, macrocyclic lactones, quinoxaline antibiotics, benzimidazoles, anthelmintics, coccidiostats and some others. A magnetic solid-phase extraction procedure was developed using magnetic hypercrosslinked polystyrene (HCP/Fe₃O₄) for the sample preparation prior to HPLC-MS/MS without deproteinization step. The results indicated recoveries of 85-107% for 14 sulfonamides, 85-120% for 13 β-lactams, 89-115% for 4 tetracyclines, 82-119% for 14 quinolones, 82-115% for 8 macrolides, 97-109% for 4 nitrofurans, 84-115% for 10 nitroimidazoles, 89-114% for 3 phenicols, 86-111% for 3 lincosamides, 97-102% for 2 pleuromutilins, 72-88% for 4 macrocyclic lactones, 87-104% for 4 quinoxaline antibiotics, 76-119% for 21 benzimidazoles, 79-115% for 12 anthelmintics, 81-118% for 12 coccidiostats and 75-119 % for 5 unclassified drugs, with relative standard deviations (RSDs) of less than 20%, and the LOQs ranged from 0.05 to 1 μg kg^-1. This methodology was then applied to field-collected real milk samples and trace levels of some veterinary drugs were detected.

Connecting the Dynamics and Reactivity of Arylboronic Acids to Emergent and Stimuli-Responsive Material Properties

Over the past two decades, arylboronic acid-functionalized biomaterials have been used in a variety of sensing and stimuli-responsive scaffolds. Their diverse applications result from the diverse reactivity of arylboronic acids,...

A low-cost and effective bagasse-based magnetic porous biochar as an adsorbent for solid phase extraction of triazine herbicides in brown sugar

A rapid and sensitive approach for enriching and extracting triazines from brown sugar samples was developed by combining magnetic dispersive solid-phase extraction and HPLC/UV. In this work, a magnetic porous biochar (MPB) derived from low-cost bagasse was prepared and successfully employed as an adsorbent. A particular emphasis was placed on optimizing the extraction conditions, including the amount of MPB, extraction time, pH, type and volume of eluent, and salt concentration. Under optimized MSPE conditions, the method showed satisfactory linearity over concentration ranges of 2-200 μg L^-1 for four triazines, with correlation coefficient values no less than 0.9981. Low limits of detection (0.27-0.33 μg L^-1), good recoveries (81.7-100.7%), and satisfactory repeatability (RSDs ≤ 8.1%) were also demonstrated with respect to the analytical performance. The results demonstrated that the developed method was simple, rapid, sensitive, and efficient, indicating that it could extract and enrich trace triazines from real samples.

[Preparation of branched polyethyleneimine-assisted boric acid-functionalized magnetic nanoparticles and its application to selective enrichment of ginsenoside Re]

为了实现更高效的人参皂苷富集,以硼亲和色谱为核心,结合支链聚乙烯亚胺放大硼酸配基数量,合成了支链聚乙烯亚胺辅助硼酸功能化磁性纳米粒(PEI-BA-MNPs),用于实际样品中人参皂苷的选择性富集,结合高效液相色谱,建立了一种分析实际样品中的人参皂苷的方法。以人参皂苷Re为代表,在优化的磁性固相萃取的条件下,该方法在50~800 μg/L的范围内呈现良好的线性,线性相关系数(R²)为0.9681。添加水平在0.1~10 mg/L时,回收率为91.5%~117.3%,相对标准偏差为7.2%~13.4%。由于所得材料对于人参皂苷的高亲和力,经所建立的方法富集过后,人参皂苷Re的灵敏度提高了约50倍。同时,所得材料重复使用5次以后还可以保持至少72%的原始吸附量。最后,将该方法用于启脾口服液中人参皂苷Re的含量分析,并与2015版《中国药典》的标准方法做对比。结果显示,所建立的方法检测出的人参皂苷Re含量为0.27%,虽然与标准方法测得的含量(0.31%)有些微差距,但该法极大地节约了实际操作中样品前处理的步骤和时间。结果表明,所制得的PEI-BA-MNPs可以用作磁性固相萃取吸附剂实现实际样品中人参皂苷的选择性富集。该方法亲和力强,选择性好,灵敏度高,操作快速简便且准确度高,具有很大的应用价值和发展前景。

Molecularly imprinted polymers in toxicology: a literature survey for the last 5 years

The science of toxicology dates back almost to the beginning of human history. Toxic chemicals, which are encountered in different forms, are always among the chemicals that should be investigated in criminal field, environmental application, pharmaceutic, and even industry, where many researches have been carried out studies for years. Almost all of not only drugs but also industrial dyes have toxic side and direct effects. Environmental micropollutants accumulate in the tissues of all living things, especially plants, and show short- or long-term toxic symptoms. Chemicals in forensic science can be known by detecting the effect they cause to the body with the similar mechanism. It is clear that the best tracking tool among analysis methods is molecularly printed polymer-based analytical setups. Different polymeric combinations of molecularly imprinted polymers allow further study on detection or extraction using chromatographic and spectroscopic instruments. In particular, methods used in forensic medicine can detect trace amounts of poison or biological residues on the scene. Molecularly imprinted polymers are still in their infancy and have many variables that need to be developed. In this review, we summarized how molecular imprinted polymers and toxicology intersect and what has been done about molecular imprinted polymers in toxicology by looking at the studies conducted in the last 5 years.

Recent progress of personal glucose meters integrated methods in food safety hazards detection

Development of personal glucose meters (PGMs) for blood glucose monitoring and management by the diabetic patients has been a long history since its first invention in 1968 and commercial application in 1975. The main reasons for its wide acceptance and popularity can be attributed mainly to the easy operation, test-to-result model, low cost, and small volume of sample required for blood glucose concentration test. During past decades, advances in analytical techniques have repurposed the use of PGMs into a general point-of-care testing platform for a variety of non-glucose targets, especially the food hazards. In this review, we summarized the recent published research using PGMs to detect the food safety hazards of mycotoxins, illegal additives, pathogen bacteria, and pesticide and veterinary drug residues detection with PGMs. The progress on PGM-based detection achieved in food safety have been carefully compared and analyzed. Furthermore, the current bottlenecks and challenges for practical applications of PGM for hazards detection in food safety have also been proposed.

Effective Enrichment Strategy Using Boronic Acid-Functionalized Mesoporous Graphene-Silica Composites for Intact N- and O-Linked Glycopeptide Analysis in Human Serum

The heterogeneity and low abundance of protein glycosylation present challenging barriers to the analysis of intact glycopeptides, which is key to comprehensively understanding the role of glycosylation in an organism. Efficient and specific enrichment of intact glycopeptides could help greatly with this problem. Here, we propose a new enrichment strategy using a boronic acid (BA)-functionalized mesoporous graphene-silica composite (denoted as GO@mSiO₂-GLYMO-APB) for isolating intact glycopeptides from complex biological samples. The merits of this composite, including high surface area and synergistic effect from size exclusion functionality of mesoporous material, hydrophilic interaction of silica, and the reversible covalent binding with BA, enable the effective and specific enrichment of both intact N- and O-glycopeptides. The results from the enrichment performance of the strategy evaluated by standard glycoproteins and the application to global N- and O-glycosylation analyses in human serum indicate the robustness and potential of the strategy for intact glycopeptide analysis.

Recent advances in aptamer-based sensors for aminoglycoside antibiotics detection and their applications

Aminoglycoside antibiotics (AAs) have been extensively applied in medical field and animal husbandry owing to desirable broad-spectrum antibacterial activity. Excessive AAs residues in the environment can be accumulated in human body through food chain and cause detrimental effect on human health. The establishment of highly specific, simple and sensitive detection methods for monitoring AAs residues is highly in demand. Aptasensor using aptamer as the biological recognition element is the efficient and promising sensing method for detection of AAs. In this review, we have made a summary of specific aptamers sequences against AAs. Subsequently, we provide a systematical and comprehensive overview of modern techniques in aptasensors for detection of AAs according to optical aptasensors as well as electrochemical aptasensors and further summarize their advantages and disadvantages to compare their applications. In addition, we present an overview of practical applications of aptasensors in sample detection of AAs. Moreover, the current challenges and future trends in this field are also included to reveal a promising perspective for developing novel aptasensors for AAs.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Magnetic solid phase extraction followed by in-situ derivatization with core-shell structured titanium dioxide coated ferriferrous oxide microspheres for determination of alendronate in plasma

In this study, for the first time, magnetic solid phase extraction (MSPE) was combined with in-situ derivatization to determine alendronate in plasma. TiO₂ coated Fe₃O₄ microspheres (denoted as Fe₃O₄@TiO₂) were synthesized via polydopamine coating, titanium ions immobilizing and calcination steps. The as-prepared microspheres could selectively extract alendronate and be quickly isolated from plasma. The drug-adsorbed Fe₃O₄@TiO₂ microspheres were then directly incubated in derivatization reagent solution to perform novel in-situ derivatization and elution procedure, in which the derivatized alendronate lost its affinity to TiO₂ and was spontaneously eluted for further LC-MS/MS detection. Satisfactory results were obtained on the creative attempt to couple dispersive magnetic solid phase extraction with in-situ derivatization. The developed method was validated and demonstrated good linearity (0.05-500 ng mL^-1), low detection limit (20 pg mL^-1), great accuracy (100.6% to 105.3%) and precision (RSDs<5.27%). Manual operation and analysis time could be greatly reduced compared to other reported methods. The method was successfully applied to a pharmacokinetic study in beagle dogs.

Preparation of boronate-functionalized surface molecularly imprinted polymer microspheres with polydopamine coating for specific recognition and separation of glycoside template

A facile strategy based on the boronate affinity and polydopamine coating was proposed for the preparation of surface molecularly imprinted polymer microspheres using naringin as the glycoside template. The poly(methacrylic acid-co-methyl methacrylate-co-ethyleneglycol dimethacrylate) microspheres were firstly synthesized as inner cores by suspension polymerization method, and then functionalized with 3-aminophenylboronic acid. The imprinted shell layer was obtained by self-polymerization of dopamine on the surface of boronic acid-functionalized polymer microspheres after reversible immobilization of naringin. The resultant surface molecularly imprinted microspheres showed good imprinting efficiency and recognition specificity toward the template molecule in aqueous environment. The isothermal and kinetic adsorption behaviors of the polymers were investigated. The results showed that the covalent surface imprinted microspheres possessed homogeneous recognition sites, strong adsorption affinity, and rapid rebinding kinetics. In addition, the surface imprinted microspheres were utilized as the sorbents of solid phase extraction to successfully separate and enrich naringin from Citri Grandis extract, and the recovery of naringin in eluting solution reached 84.4%.

Synthesis of sandwich-structured magnetic graphene-Zn-MOFs composites for quantitative determination of acarbose in rat plasma

In this study, sandwich-structured magnetic graphene composites with Zn metal-organic framework layer coated on both two sides (denoted as magG@Zn-MOFs) were synthesized. The composites have large specific surface of 114 m² g⁻¹, uniform porous structure and rapid magnetic separation within 10 s. The magG@Zn-MOFs composites were used for extraction of acarbose in plasma prior to its quantitative analysis by LC-MS/MS. The established method has good linearity (10-1000 ng mL^-1), satisfactory recovery (94.3-107.5%), low detection limit (as low as 2.5 ng mL^-1), good intra-day precision (RSD 3.5-5.3%) and inter-day precision (RSD 6.3-8.1%). Finally, the method was successfully applied to pharmacokinetic study of acarbose in rats.

Development of carbohydrate functionalized magnetic nanoparticles for aminoglycosides magnetic solid phase extraction

Magnetic nanoparticles decorated with d-galactose and galactitol (Fe₃O₄@SiN-galactose and Fe₃O₄@SiN-galactitol) were synthesized and employed as sorbent in a magnetic solid phase extraction (MSPE) procedure prior the analysis of aminoglycosides (AGs) in honey samples by LC-MS/MS. AGs are broad spectrum antibiotics, characterized by aminosugars, widespread used in therapeutic and veterinary applications. AGs can be found in the environment and food of animal origin. Fe₃O₄@SiN-galactose and Fe₃O₄@SiN-galactitol were synthesized via copper catalyzed alkyne azide cycloaddition and the synthesis was efficiently followed by infrared spectroscopy. They were characterized by electron microscopy, thermogravimetric analysis and magnetization curves. The nature of the loading (acetonitrile:water, 50:50 v/v) and elution solution (formic acid 190 mM) were studied in order to optimize the MSPE. Quantitative difference between MSPE with Fe₃O₄@SiN-galactose and MSPE with Fe₃O₄@SiN-galactitol in terms of recovery was found. The final optimized method using Fe₃O₄@SiN-galactose and Fe₃O₄@SiN-galactitol was applied in the determination of AGs in honey. The MSPE performance of Fe₃O₄@SiN-galactitol was found to be superior to that of MSPE with Fe₃O₄@SiN-galactose. The limits of quantification were between 2 and 19 μg kg^-1 for amikacin, dihydrostreptomycin, tobramicyn and gentamycin. A good correlation between predicted and nominal values of AGs in honey was found (trueness from 84% to 109%). This MSPE procedure not only requires a minimum amount of sorbent (1 mg) and sample (0.2 g), but it can also be accomplish in a rather short time.

Interaction of graphene oxide with cell culture medium: Evaluating the fetal bovine serum protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions

The interaction of single-layer graphene oxide (SLGO) and multi-layered graphene oxide (MLGO) with a cell culture medium (i.e. DMEM) was studied by evaluating fetal bovine serum (FBS) protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions. SLGO and MLGO exhibited different colloidal behavior in the culture medium, which was visualized by cryogenic transmission electron microscopy in situ analysis. Exploring proteomics and bioinformatics tools, 394 and 290 proteins were identified on the SLGO and MLGO hard corona compositions, respectively. From this amount, 115 proteins were exclusively detected on the SLGO and merely 11 on MLGO. SLGO enriched FBS proteins involved in metabolic processes and signal transduction, while MLGO enriched proteins involved in cellular development/structure, and lipid transport/metabolic processes. Such a distinct corona profile is due to differences on surface chemistry, aggregation behavior and the surface area of GO materials. Hydrophilic interactions were found to play a greater role in protein adsorption by MLGO than SLGO. Our results point out implications for in vitro studies of graphene oxide materials concerning the effective dose delivered to cells and corona bioactivity. Finally, we demonstrated the importance of integrating conventional and modern techniques thoroughly to understand the GO-FBS complexes towards more precise, reliable and advanced in vitro nanotoxicity assessment.

Determination of perchlorate from tea leaves using quaternary ammonium modified magnetic carboxyl-carbon nanotubes followed by liquid chromatography-tandem quadrupole mass spectrometry

The novel quaternary ammonium modified magnetic carboxyl-carbon nanotubes (QA-Mag-CCNTs) have been synthesised and characterized. QA-Mag-CCNTs were applied in magnetic dispersive solid phase extraction (Mag-dSPE) for preconcentration of perchlorate from tea leaves prior to liquid chromatography-tandem quadrupole mass spectrometry (LC-MS/MS) analysis. The Mag-dSPE procedure for preconcentration of perchlorate succeed in overcoming the flaw (containing target analyte randomly) of commercially available SPE cartridge. Under optimal conditions, the results showed higher extraction efficiency of QA-Mag-CCNTs, with recoveries between 85.2% and 107%. And the satisfactory precision with inter-day and intra-day RSD values were lower than 8.0%. Furthermore, QA-Mag-CCNTs were evaluated for reuse up to 20 times. The limit of quantification (LOQ) for perchlorate was 8.21 ng kg^-1. The developed method was successfully applied in tea leaves for food-safety risk monitoring in Zhejiang province, China. The results showed the concentrations of perchlorate in 229 out of 240 collected samples were in the range of 0.082-988 μg kg^-1. It was confirmed that QA-Mag-CCNTs were highly effective materials used for preconcentration of perchlorate.

Polyaniline Coated Core-Shell Typed Stimuli-Responsive Microspheres and Their Electrorheology

Functional core-shell-structured particles have attracted considerable attention recently. This paper reviews the synthetic methods and morphologies of various electro-stimuli responsive polyaniline (PANI)-coated core-shell-type microspheres, including PANI-coated Fe₃O₄, SiO₂, Fe₂O₃, TiO₂, poly(methyl methacrylate), poly(glycidyl methacrylate), and polystyrene along with their electrorheological (ER) characteristics when prepared by dispersing these particles in an insulating medium. In addition to the various rheological characteristics and their analysis, such as shear stress and yield stress of their ER fluids, this paper summarizes some of the mechanisms proposed for ER fluids to further understand the responses of ER fluids to an externally applied electric field.