Effects of glutenin and gliadin modified by protein-glutaminase on pasting, rheological properties and microstructure of potato starch

Preparation and characterization of carboxymethylated Anemarrhena asphodeloides polysaccharide and its effect on the gelatinization of wheat starch

In this study, a carboxymethylated Anemarrhena asphodeloides polysaccharide (CM-AARP) with an molecular weight (Mw) of 7.8 × 104 Da was obtained. CM-AARP was composed of four monosaccharides including d-mannose, d-glucose, d-galactose, and l-arabinose. Nuclear magnetic resonance (NMR) spectra revealed that the skeleton of CM-AARP was identical to that of AARP. Compared with AARP, CM-AARP had a superior inhibition effect on the gelatinization of wheat starch (WS) under the same condition. The addition of CM-AARP and AARP at 12 % enhanced the gelatinization temperature (60.47 ± 1.30 °C) of WS to 73.88 ± 0.49 °C and 69.75 ± 0.52 °C, respectively. CM-AARP could maintain the crystal structure of WS during gelatinization, the relative crystallinity with the 12 % CM-AARP addition was determined as 29.18 % ± 1.49 %, exceeding that of pure WS at 21.96 % ± 0.66 %. Moreover, CM-AARP influenced the rheological behavior of the gelatinized WS by reducing the viscosity and improving the fluidity. The results suggested that CM-AARP played an essential role in starch gelatinization and was a potential stabilizer in the starch-based food industry.

Effects of soaking glutinous sorghum grains on physicochemical properties of starch

Glutinous sorghum grains were soaked (60-80 °C, 2-8 h) to explore the effects of soaking, an essential step in industrial processing of brewing, on starch. As the soaking temperature increased, the peak viscosity and crystallinity of starch gradually decreased, while the enzymatic hydrolysis rate and storage modulus first increased and then decreased. At 70 °C, the content of amylose, the enzymatic hydrolysis rate of starch, and the final viscosity first increase and then decrease with the increase of soaking time, reaching their maximum at 6 h, increased by 53.1 %, 11.0 %, and 10.4 %, respectively, as compared with the non-soaked sample. At 80 °C (4 h), the laser confocal microscopy images showed a network structure formed between the denatured protein chains and the leached-out amylose chains. The molecular weights of starch before and after soaking were all in the range of 3.82-8.98 × 107 g/mol. Since 70 °C is lower than that of starch gelatinization and protein denaturation, when soaking for 6 h, the enzymatic hydrolysis rate of starch is the highest, and the growth of miscellaneous bacteria is inhibited, which is beneficial for subsequent processing technology. The result provides a theoretical basis for the intelligent control of glutinous sorghum brewing.

Heat-Induced Gelation of Chickpea and Faba Bean Flour Ingredients

This study aimed to investigate the gelling behavior of faba bean (FB) and chickpea (CP) flour between 10 and 20% (w/w) concentration at pH 3.0, 5.0, and 7.0. Both sources formed at pH 3.0 and 5.0 self-standing gels with 12% (w/w) of flour, while 16% (w/w) of flour was required to obtain a gel at pH 7.0. During gelling between 40 and 70 °C, a sharp increase of the elastic modulus G' was observed in both flours, mainly due to water absorption and swelling of the starch, one of the major constituents in the ingredients. Increasing the temperature at 95 °C, G' increased due to the denaturation of globulins and therefore the exposure of their internal part, which allowed more hydrophobic interactions and the formation of the gel. After cooling, both FB and CP gels displayed a solid-like behavior (tan δ ranging between 0.11 and 0.18) with G' values at pH 3.0 and 5.0 significantly (p < 0.05) higher than those at pH 7.0, due to the lower electrostatic repulsions at pHs far from the isoelectric point. The rheological properties were supported by the water binding capacity values, confirming the better gels' strength described by rheological analysis. These results will enhance our understanding of the role of legume flours in formulating innovative and sustainable food products as alternatives to animal ones.

Effects of zucchini polysaccharide on pasting, rheology, structural properties and in vitro digestibility of potato starch

Zucchini polysaccharide (ZP) has a unique molecular structure and a variety of biological activities. This study aimed to evaluate the effects of ZP (1, 2, 3, 4 and 5 %, w/w) on the properties of potato starch (PS), including pasting, rheological, thermodynamic, freeze-thaw stability, micro-structure, and in vitro digestibility of the ZP-PS binary system. The results showed that the appearance of ZP significantly reduced the peak, breakdown, final and setback viscosity and prolonged the pasting temperature of PS, whereas increased the trough viscosity. The tests of rheological showed that ZP had a damaging effect on PS gels. Meanwhile, the results of thermodynamic and Fourier transform infrared exhibited that the presence of ZP significantly retarded the retrogradation of PS, especially at a higher levels. The observation of the microstructure exhibited that ZP significantly altered the microscopic network structure of the PS gels, and ZP reduced the formation of the gel structure. Besides, ZP postponed the retrogradation process of PS gels. Moreover, ZP weakened the freeze-thaw stability of the PS gel. Furthermore, ZP also can decrease the digestibility and estimated glycemic index (eGI) value of PS from 86.04 % and 70.89 to 77.67 % and 65.22, respectively. Simultaneously, the addition of ZP reduced the rapidly digestible starch content (from 25.09 % to 16.59 %) and increased the slowly digestible starch (from 24.99 % to 26.77 %) and resistant starch content (from 49.92 % to 56.64 %). These results have certain guiding significance for the application of ZP in starch functional food.

Effect of protein addition in properties of gels produced with jackfruit (Artocarpus integrifolia) seed starch: rheological and texture properties

Starches and proteins are two major types of biopolymer components in many foods. The interactions of protein with starches greatly influence the matrix structure and properties of starch-based food systems. In this study, the physical-chemical properties and the effect of the commercial whey protein concentrate in the texture and rheological properties of jackfruit starch gels were evaluated. The experimental design was completely randomized, using a 4 × 4 complete factorial scheme, with four levels of starch (3, 6, 9 and 12%) and four levels of protein (0, 2, 4 and 6%). In higher concentrations of starch the addition of proteins delayed the beginning of gelatinization, led to an increase in G' and G″ and decrease in the tan (δ) values, characterizing the gel as strong, e.g., the gel network became more structured. However, in the treatment with 6% starch the addition of protein led to a decrease in gel strength. For gels with 9% starch the increase in protein concentration, led a slight increase in the hardness and cohesiveness, characterizing a more rigid and cohesive gel. Overall, gels with 3 and 6% of starch showed characteristic behavior of a weak gel and with 9 and 12% of strong gel.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05793-1.

Retrogradation inhibition of wheat starch with wheat oligopeptides

Starch staling greatly reduces the cereal products quality, and the staling retardation becomes a focus in current research. The effect of wheat oligopeptide (WOP) on anti-staling properties of wheat starch (WS) was studied. Rheology property indicated that WOP reduced WS viscosity, showing more liquid-like behavior. WOP improved the water holding capacity, inhibited swelling power, and reduced the hardness of WS gels, which decreased from 1200 gf to 800 gf compared with the control after 30 days storage. Meanwhile, the water migration of WS gels were also reduced with WOP incorporation. The relative crystallinity of WS gel with 1% WOP was reduced by 13.3%, and the pore size and the microstructure of gels was improved with WOP. Besides, the short-range order degree reached the lowest value with 1% WOP. In conclusion, this study explained the interaction between WOP and WS, which was beneficial to the application of WOP in WS-based food.

Climate-Nutrient-Crop Model: Novel Insights into Grain-Based Food Quality

Mineral nutrients spatiotemporally participate in the biosynthesis and accumulation of storage biopolymers, which directly determines the harvested grain yield and quality. Optimizing fertilizer nutrient availability improves the grain yield, but quality aspects are often underestimated. We hypothesize that extensive mineral nutrients have significant effects on the biosynthesis, content, and composition of storage proteins, ultimately determining physicochemical properties and food quality, particularly in the context of climate change. To investigate this, we hierarchized 16 plant mineral nutrients and developed a novel climate-nutrient-crop model to address the fundamental question of the roles of protein and starch in grain-based food quality. Finally, we recommend increasing the added value of mineral nutrients as a socioeconomic strategy to enhance agro-food profitability, promote environmental sustainability, and improve climate resilience.

Physicochemical, Pasting, and Thermal Properties of Native Corn Starch-Mung Bean Protein Isolate Composites

Starch is widely used in food and non-food industries because of its unique characteristics. However, native starch shows some weaknesses that restrict its applications. Recently, some studies have demonstrated the benefits of using protein to overcome these limitations. Therefore, the aim of the present study was to investigate the effect of mung bean protein isolate (MBPI) (2%, 4%, 6%, and 8%) on the physicochemical, pasting, and thermal properties of native corn starch (NCS), as a novel starch-protein composite. Higher swelling power (SP), water absorbance capacity (WAC), and solubility values of NCS were observed with increasing MBPI concentration. Additionally, by the addition of MBPI, the rapid visco analyzer (RVA) showed a reduction in pasting temperature (77.98 to 76.53 °C), final viscosity (5762 to 4875 cP), and setback (3063 to 2400 cP), while the peak viscosity (4691 to 5648 cP) and breakdown (1992 to 3173 cP) increased. The thermal properties of NCS/MBPI gels investigated by differential scanning calorimetry (DSC) showed higher onset, peak, and conclusion temperatures (69.69 to 72.21 °C, 73.45 to 76.72 °C, and 77.75 to 82.26 °C, respectively), but lower gelatinization enthalpy (10.85 to 8.79 J/g) by increasing MBPI concentration. Fourier transform infrared spectroscopy (FT-IR) indicated that the addition of MBPI decreased the amount of hydrogen bonds within starch. Furthermore, after three cycles of freeze-thaw shocks, the syneresis of NCS-MBPI composites decreased from 38.18 to 22.01%. These results indicated that the MBPI could improve the physicochemical properties of NCS, especially its syneresis and retrogradation characteristics.

Effect of annealing using plasma-activated water on the structure and properties of wheat flour

In this study, wheat flour (WF) was modified by annealing (ANN) using plasma-activated water (PAW) for the first time. Compared with WF and DW-WF, the results of scanning electron microscopy (SEM) and particle-size analysis showed that the granule structure of wheat starch in PAW-WF was slightly damaged, and the particle size of PAW-WF was significantly reduced. The results of X-ray diffraction and Fourier transforming infrared spectroscopy indicated that PAW-ANN could reduce the long-range and short-range order degrees of wheat starch and change the secondary structure of the protein in WF, in which the content of random coils and α-helices was significantly increased. In addition, the analysis of solubility, viscosity, and dynamic rheological properties showed that PAW-ANN improved the solubility and gel properties of WF and decreased its viscosity properties and short-term regeneration. PAW-ANN, as a green modification technology, has the potential for further application in WF modification, as well as in the production of flour products.

Study on the Pasting Properties of Indica and Japonica Waxy Rice

In this study, the physicochemical properties of indica (IWR) and japonica (JWR) waxy rice were investigated to find the critical factor that differentiates the pasting behaviors among the two cultivars. The results showed that the peak viscosity of 5 IWR flours was in the range of 1242 to 1371 cP, which was significantly higher than 4 JWR flours (667 to 904 cP). Correlation analysis indicated that all pasting parameters were not correlated (p < 0.05) with physicochemical properties of rice flours and the fine structure of isolated starches. The pasting profiles of IWRs were still significantly higher than those of JWRs after removing lipid, while there were no significant differences between the two cultivars after removing protein sequentially. Meanwhile, the addition of extracted protein from JWR to the isolated starch significantly decreased the viscosity compared to the addition of protein extracted from IWR. The protein composition results found that the IWR protein contained about 18% globulin and 64% glutelin, while the JWR protein contained 11% globulin and 73% glutelin. The addition of glutelin to isolated starch significantly decreased viscosity compared to the addition of globulin. Therefore, the differences in the content of globulin and glutelin might be the main reasons that differentiate the pasting behaviors of the two cultivars.

Microencapsulated procyanidins by extruding starch improved physicochemical properties, inhibited the protein and lipid oxidant of chicken sausages

Microencapsulated procyanidins by extruding starch (MPS) were used in meat and meat products as an antioxidant for their simple production process and high stability. This study investigated the controlled released properties of MPS and their effect on antioxidant capacity, physicochemical properties, and sensory qualities of chicken sausages during 4°C storage within 28 days. Antioxidant capacity, particle size analysis, and simulated digestion in vitro demonstrated that microencapsulation by extruding starch delayed the procyanidins release. The reduced crystal structure of MPS was determined by the morphology observation (SEM) and the decrease of the typical diffraction peak at 2θ of 20.9° (XRD). The MPS-added sausage had a higher (p < 0.05) ABTS and DPPH radical scavenging ratio (97.6% and 67.3%) and sulfhydryl contents (114.69 nmol/g protein) than other groups. Moreover, lower (p < 0.05) thiobarbituric acid reactive substances (TBARS) (0.67 mg MDA/kg sausage) and carbonyl values (3.24 nmol/mg protein) were detected in MPS-added sausages than others at the end of storage. The MPS addition increased redness (a* value) and decreased the lightness (L* value). The sensory analysis suggested that the sausage with the increased redness was favorable. These results denominated that MPS was an alternative antioxidant in chicken sausages. Practical Application: In this study, microencapsulated procyanidins were prepared by extrusion technology, and the effect on the quality of chicken sausages was investigated, which provides an alternative natural antioxidant for meat and meat products.

Effects of Inca peanut seed albumin fraction on rheological, thermal and microstructural properties of native corn starch

In this work, the effect of Inca peanut seed albumin fraction (IPA) on the rheological, thermal and microstructural properties of native corn starch (NCS) was firstly studied. Compared to the NCS, IPA addition could obviously decrease the transparency of NCS, and the transparency of NCS and NCS-IPA suspensions decreased during the storage time. The textural paraments of NCS pastes with or without IPA reached to the maximum at a concentration of 5%. Steady shear rheological tests showed that all systems were non-Newtonian fluid, and the consistency coefficient (K) values reached to the maximum at 5% IPA concentration. The storage and loss modulus values of NCS-IPA pastes were higher than those of NCS pastes, and curves of loss angle (tan δ) indicated that all pastes were typical weak gel. With the increasing addition of IPA, DSC analysis showed that the thermal properties (To, Tp and Tc) of NCS were significantly changed, whereas, there was no distinct difference in the enthalpy. Microscopy illustrated that there were some wrinkle shrinkage and severe folds on the NCS-IPA granules. Fourier-transform infrared (FT-IR) spectroscopy showed that the hydrogen bonding was primarily interaction forces between IPA and NCS molecules.

Control of wheat starch rheological properties and gel structure through modulating granule structure change by reconstituted gluten fractions

Reconstituted gluten fractions (RGF) varying in glutenin/gliadin (glu/gli) ratios was applied to change the property of wheat starch. The addition of RGF, irrespective of glu/gli ratio, significantly decreased the gelatinization enthalpy, viscosity, storage modulus (G'), and gel strength of starch. Starch particle size and leached amylose decreased by 4.5% and 22.2%, respectively, as the ratio of glu/gli changed from 1:0 to 0:1, indicating that the increase in gliadin ratio could inhibit swelling and rupturing of starch granules to a larger extent. Confocal laser scanning micrographs showed that gliadin could surround starch granules more effectively, thereby stabilizing the granule structure better than glutenin. With the increasing of gliadin ratio, the storage modulus (G') and loss modulus (G″) of the starch paste declined, accompanied by more loose gel structure and weaker gel strength. By varying the ratios of glu/gli in RGF, the change of wheat starch granule structure could be modulated, and therefore the rheological properties and gel structure could be regulated.

Effect of dandelion root polysaccharide on the pasting, gelatinization, rheology, structural properties and in vitro digestibility of corn starch

The influence of dandelion root polysaccharide (DRP) on the gelatinization properties and in vitro digestibility of corn starch was investigated. Pasting behaviors indicated that the addition of DRP led to an increase of the pasting temperature and a decrease of viscosity. Compared to native corn starch, the swelling power, solubility and content of amylose leaching were reduced as the DRP addition increased. Scanning electron microscopy (SEM) analysis showed that DRP was easily dispersed in the starchy matrix, and a more uniform structure was observed in corn starch/DRP pastes. Fourier transform infrared (FT-IR) and X-ray diffraction (XRD) analyses confirmed that the crystal shape of the corn starch gels was not changed and no new groups were produced with increasing DRP concentration. Moreover, DRP could improve the fluidity of the gelatinized corn starch and reduce its digestibility. These findings provided fundamental information about DRP's application in the whole processing of corn starch.

Physicochemical properties and in vitro digestibility of hydrothermal treated Chinese yam (Dioscorea opposita Thunb.) starch and flour

The objective of this study was to investigate the effects of hydrothermal treatments (heat-moisture treatment (HMT) and annealing (ANN)) on the physicochemical properties and in vitro digestibility of yam starch and yam flour. Hydrothermal treatments decreased the pasting properties of yam starch and yam flour. Compared with yam starch, HMT significantly (p < 0.05) reduced the pasting viscosities of yam flour. Both HMT and ANN caused an increase of the gelatinization temperatures (T_o, T_p, and T_c) and a decrease of enthalpy (△H). The increasement in ratio of 1047/1022 cm^-1 and 995/1022 cm^-1 suggested that HMT and ANN resulted in an increase in short-range order. The crystalline pattern of all samples was still A-type, and HMT yam starch exhibited higher crystallinity (26.20%). The most significant inhibition of in vitro digestibility was found in HMT yam flour, with slowly digestible starch and resistant starch contents increasing by 3.73% and 4.40%, respectively. Hydrothermal treatments made the no-starch ingredients in yam flour agglomerate and adhere to starch granules. Confocal laser scanning microscopy showed that the starch being coated or embedded by protein was a possible reason for the differences in physicochemical properties and in vitro digestibility between yam starch and yam flour.

Improving the Stability and Curcumin Retention Rate of Curcumin-Loaded Filled Hydrogel Prepared Using 4αGTase-Treated Rice Starch

In this study, 4-α-glucanotransferase (4αGTase)-treated rice starch (GS) was added after 1-h (1 GS) and 96-h (96 GS) treatments to the aqueous phase of a curcumin-loaded emulsion to produce filled hydrogels (1 GS-FH and 96 GS-FH, respectively). The relative protective effects of the FH system, native rice starch-based filled hydrogel (RS-FH), and emulsion without starch (EM), on curcumin were evaluated based on ultraviolet (UV) stability and simulated gastrointestinal studies. The UV stability and curcumin retention after in vitro digestion of the filled hydrogels (FH) samples were greater than those of the EM samples. RS-FH showed a 2.28-fold improvement in UV stability over EM due to the higher viscosity of RS. 1 GS-FH and 96 GS-FH increased curcumin retention by 2.31- and 2.60-fold, respectively, and the microstructure of 96 GS-FH, determined using confocal laser microscopy, remained stable even after the stomach phase. These effects were attributed to the molecular structure of GS, with decreased amylopectin size and amylose content resulting from the enzyme treatment. The encapsulation of lipids within the GS hydrogel particles served to protect and deliver the curcumin component, suggesting that GS-FH can be applied to gel-type food products and improve the chemical stability of curcumin.

The preparation of modified nano-starch and its application in food industry

Starch, which is a carbohydrate polymer with a semicrystalline granular structure, has been the subject of academic research for decades due to its renewable and biodegradable property as well as various applications in food, pharmaceutical and other industries. Nano-starch (NS) is a novel type of starch material with unique physiochemical properties due to its small size. However, the nano-size nature of NS determines its tendency to agglomeration as a natural process to approach a thermodynamically steady state, and the single hydroxyl functional group is also not favorable to its applications in hydrophobic environments. Thus, modified-NS with improved dispersion property, hydrophobicity, and stability is emerging as a new research direction. However, information about modified-NS is sporadic in literature, and a systematic review from its preparation, application, the problem and challenge as well as related health concerns is carried out to further the understanding of modified-NS. It is expected that the theoretical basis and new insight into the development of modified-NS will be improved.

The functionality of laccase- or peroxidase-treated potato flour: Role of interactions between protein and protein/starch

Potato flour is used in bakery products, extruded products and snacks. However, it displays weaker gel strengths and thus the wholesome utility is curtailed significantly. To improve viscoelastic properties and stability of potato gels, herein potato flour was treated with laccase and peroxidase to create a protein network structure leading to stable gels. The results revealed that the secondary structure of potato proteins altered upon the enzyme treatment. The gels of peroxidase-treated potato flour (PPF) and laccase-treated potato flour (LPF) displayed larger anti-shear ability, thermal stability and stronger three-dimensional network structure compared to the native potato gel. The PPF and LPF gels exhibited stronger viscoelastic properties and structural stability compared to peroxidase-treated potato protein and laccase-treated potato protein gels. The outcome serves as a theoretical basis to improve the properties of potato gels and to promote the designing and the development of novel potato flour based functional food.

Mass production of active recombinant Chryseobacterium proteolyticum protein glutaminase in Escherichia coli using a sequential dual expression system and one-step purification

Protein glutaminase (PG) is an enzyme that specifically catalyzes the deamidation of glutamine residues on proteins or peptides, remarkably improving the solubility, emulsification and foaming properties of food proteins and, thereby, conferring great potential in food industry applications. PG is primarily produced from wild strains of Chryseobacterium proteolyticum and the low enzyme production yield restricts large-scale industrial applications. In this context, by evaluating different cleavage site insertions between the pro-region and mature domain of PG as well as different linkers flanking the cleavage site, an E. coli expression and purification protocol has been developed to produce active recombinant PG. To simplify the production workflow, we developed a sequential dual expression system. More than 15 mg of pure and active PG was obtained from 1 L of shaking-flask bacteria culture by one-step nickel affinity chromatography purification. The enzymatic characteristics of the recombinant PG protein were similar to those of native PG. For the deamidation effect of recombinant PG, the deamidation degree (DD) of gliadin reached up to 67% and the solubility increased 84-fold. Thus, this study provides a practical approach to mass producing active PG proteins and investigates its potential applications on food proteins.

Effect of Hydrocolloid Gums on the Pasting, Thermal, Rheological and Textural Properties of Chickpea Starch

The study was planned to evaluate the effect of non-commercial gums as compared to commercial gums. The concentration dependent effect of two commercial (arabic, xanthan) and four non-commercial (cress seed, fenugreek, flaxseed, okra) polysaccharide gums on the pasting, rheological, textural and thermal properties of chickpea were investigated by rapid visco analyzer (RVA), hybrid rheometer, texture analyzer and differential scanning calorimetry (DSC). Blends were prepared by replacing chickpea starch at 0.5% and 2.0% with gums, whereas native chickpea starch was used as a control. RVA data showed that peak and final viscosities were dramatically increased with xanthan contrary to reduction with gum arabic, flaxseed and okra gums. Hybrid rheometer displayed that storage and loss moduli were increased as a function of angular frequency and dominance of elastic properties over viscous ones. Xanthan blend was less temperature dependent due to dramatic decrease in activation energy value as compared to control while other gums were more temperature dependent. The magnitude of this effect was reliant on the type and concentration of gum. After storage for 21 days at -20 °C, total syneresis was reduced with the incorporation of xanthan and cress seed and also with high levels of gum arabic, flaxseed and fenugreek gums. The gel hardness was increased after overnight storage at ambient temperature (23 °C) with fenugreek while reduction in hardness was observed with xanthan, flaxseed and okra gums. The presence of gums resulted in significantly higher onset and peak temperatures determined through differential scanning calorimetry.

Evaluation of Starch⁻Protein Interactions as A Function of pH

Protein-starch gels are becoming more common in food processing when looking for enriched foods. However, processing conditions scarcely are considered when producing those gels. The aim of this research was to study the effect of processing pH (4.5, 6.0, and 7.5) on the hydration and pasting properties, gel microstructure, and texture of corn starchy gels made with four different proteins (pea, rice, egg albumin, and whey) at a ratio of 1:1 starch/protein and a solid content of 12.28%. The water binding capacity of the starch-protein mixtures was positively influenced by low solubility of the protein used. Acidic pH decreased the apparent peak viscosity of both starch and starch-protein mixtures, with the exception of starch-albumin blends, which increased it. The gels' microstructure showed that the uniformity of the protein-enriched gels was dependent on protein type and pH, leading to diverse hardness. In general, the starchy gels containing animal proteins (albumin and whey) were more affected by pH than those obtained with vegetal proteins (pea and rice). Therefore, processing pH might be an advisable method to modify the functionality of starch-protein gels.

Complete Genome Sequence and Characterization of a Protein-Glutaminase Producing Strain, Chryseobacterium proteolyticum QSH1265

Recently, an enzyme named protein-glutaminase (PG) has been identified as a new type of enzyme with significant potential for deamidation of food proteins. The enzyme is shown to be expressed as a pre-pro-protein with a putative signal peptide of 21 amino acids, a pro-sequence of 114 amino acids, and a mature PG of 185 amino acids. The microbial enzyme PG specifically catalyzes deamidation of proteins without protein hydrolysis pretreatment and only reacts with glutamine residues in the side-chains of proteins or long peptides. All these attributes suggest that it has a great potential for food industrial applications. However, until recently, there have been relatively few studies of the PG-producing strains. A strain named Chryseobacterium proteolyticum QSH1265 which can produce PG was isolated from a soil sample collected in Songjiang, Shanghai, China. Its enzyme activity was about 0.34 ± 0.01 U/mL when using carboxybenzoxy-Gln-Gly as a substrate. The strain can produce acid from D-glucose, maltose, L-arabinose sucrose, glycerol, and mannitol but not fructose, and it is also positive for indole production and urease. Here we describe the complete genome sequence of this strain via PacBio RSII sequencing. The C. proteolyticum QSH1265 genome consists of a circular chromosome with total length of 4,849,803 bp without any plasmids. All of 4563 genes were predicted including 4459 genes for protein-coding and 104 RNA-relative genes with an average G+C content of 36.16%. The KEGG and COG annotation provide information for the specific function of proteins encoded in the genome, such as proteases, chromoproteins, stress proteins, antiporters, etc. A highly conserved hypothetical protein shares a promoter with the gene encoding the protein-glutaminase enzyme. The genome sequence and preliminary annotation provide valuable genetic information for further study of C. proteolyticum.