Formulation of dark chocolate as a carrier to deliver eicosapentaenoic and docosahexaenoic acids: Effects on product quality

Bioactive properties of spearmint, orange peel, and baby sage oleoresins obtained by supercritical CO2 extraction and their integration into dark chocolate

This study investigated the potential health benefits of spearmint, orange peel, and baby sage oleoresins extracted using supercritical CO2 and subsequently emulsified. The oleoresins were incorporated into dark chocolate, and their impact on physicochemical properties was evaluated. Characterization revealed rich sources of phenolic compounds, carotenoids, and volatile compounds in these oleoresins. In vitro studies demonstrated anti-obesogenic, antioxidant, anti-inflammatory, and neuroprotective properties of the emulsified oleoresins. However, only physicochemical properties were determined for the formulations of dark chocolate with these emulsified oleoresins. Chocolate formulations fortified with these emulsions displayed a softer texture, lower water activity, and solid-like behavior. The findings suggest that these oleoresins could serve as nutraceutical agents for mitigating metabolic syndrome and associated pathologies. Incorporating them into chocolate matrices offers a practical approach to formulating functional foods. Further research is warranted to explore the preventive and therapeutic efficacy in an in vivo model.

Phenolic content and oxidative stability of chocolates produced with roasted and unroasted cocoa beans

The aim of this study was to produce chocolate using roasted (RB) and unroasted cocoa beans (URB). The effect of roasting on the total phenolic content (TPC), antioxidant activity [2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity, ferric reducing antioxidant power (FRAP), and cupric ion reducing antioxidant capacity (CUPRAC) values], phenolic compounds, caffeine, oxidative stability [free fatty acid, peroxide, conjugated dienes, conjugated trienes, and thiobarbituric acid reactive substances (TBARS)], Fourier transform infrared (FTIR), and differential scanning colorimetry (DSC) analysis of both cocoa beans and chocolate samples were analyzed. According to the results, the TPC of URB (24.96 mg gallic acid equivalent (GAE)/g sample) was higher than roasted beans (21.32 mg GAE/g sample). Similar results were also seen in the TPC of chocolate samples. Although roasting did not affect the DPPH scavenging activity and caffeine content of cocoa beans, it decreased FRAP and CUPRAC values. (-)-Epicatechin and chlorogenic acid values were higher in unroasted bean and chocolate samples, but the amount of gallic acid increased with the roasting process. Free fatty acid, peroxide, conjugated dienes, conjugated trienes, and TBARS results of unroasted samples were lower than roasted ones, indicating better oxidative stability. The melting temperatures of cocoa beans changed with roasting while it was similar between chocolate samples. Composition of the beans and the chocolate samples were qualitatively determined with FTIR.

Production of low-protein cocoa powder with enzyme-assisted hydrolysis

Amino acid-related disorders are caused by a defect in the metabolic pathways of amino acid groups. These patients must follow a lifelong protein diet. The objective of this study was to produce a low-protein cocoa powder (LPP) with enzymatic hydrolysis and precipitation method. First, the solubility of cocoa powder was increased by heat and enzyme treatments (Amylase, Viscozyme, and Alcalase). Then, the protein level was decreased by isoelectric precipitation. According to the obtained results, the solubility of cocoa powder rose from 28.61% to 50.69%. Protein content decreased by almost 40% and significant reductions in the amino acid profile were also provided; the highest ones were detected in methionine (100%), lysine (73.65%), leucine (53.64%), alanine (46.17%), and isoleucine (44.73%) levels. LPP had high phenolic content (25.10 mg/g GAE) and the changes in the antioxidant activities were not significant (p > .05). Moreover, chocolate production with LPP and control powder was also carried out under laboratory conditions. Hardness (1732.52 g), moisture content (0.60%), and water activity (0.37) of chocolate samples produced with low-protein cocoa powder (LPC) were lower than those of the control sample. The Casson model well fitted to the rheological data (R 2 > .990) and chocolate samples showed elastic behavior. The removal of proteins from the cocoa was verified with Fourier transform infrared spectroscopy analyses. The melting temperatures of chocolates (31.84 and 31.54°C for control and LPC samples, respectively) did not change with the applied process. As a conclusion, it was revealed that the production of low-protein cocoa powder and chocolate is feasible for patients with amino acid disorders with this study.

Bioactive fatty acids from non-conventional lipid sources and their potential application in functional food development

There is growing evidence that bioactive fatty acids (BFAs), including eicosapentaenoic acid (EPA; 20:5-3), docosahexaenoic acid (DHA; 22:6-3), and conjugated fatty acids offer multiple biological benefits and constitute ingredients in functional food development. Despite their potential, novel and alternative/nonconventional sources with unique bioactive properties to meet growing demand remain largely unexplored, poorly characterized, and their effects are not well understood. We systematically reviewed the literature to identify studies on alternative sources of BFAs, their functions, extraction, and application in the food and nutraceutical industry. Twenty studies delved into alternate sources such as plants, bacteria, and algae. Six studies found EPA and DHA as the dominant FA in algal sources, while ten studies reported several BFAs from plant sources. Five studies assessed the health benefits of docosapentaenoic acid (DPA), arachidonic acid (ARA), EPA, γ-linolenic acid (GLA), and linoleic acid (LA). Eleven studies compared the quality of oil recovered by green solvents, pressurized liquid, supercritical fluid, and assisted extraction methods. Three studies assessed the effects of assisted extraction methods and reported that these approaches improved oil yield and quality, but the findings may have limited applicability to other lipid sources. The quality of nonconventional lipids largely depends on extraction techniques. Four studies suggested methods like 1D and 2D NMR spectroscopy, LC-MS/MS; however, their analytical differences make accurate comparison inadequate. Five studies found that the incorporation of algal and seafood biolipids during product development increased EHA and DHA contents.

Fortification of chocolate with microencapsulated fish oil: Effect of protein wall material on physicochemical properties of microcapsules and chocolate matrix

Protein stabilized fish oil microcapsules were incorporated into chocolates in order to design fortified product which could bear the nutritional claim "source of or high omega-3 fatty acids". Protein wall material (soy, whey and potato) influenced microcapsules and chocolate performance. Soy protein resulted in the smallest microcapsules with the lowest content of surface oil. Peroxide values were low even after 14 days of microcapsules storage. Incorporation of microcapsules into chocolate led to increase in Casson viscosity and breaking force as well as decrease in melting enthalpy, due to prevalence of particle-particle over fat-fat interactions. Increase in microcapsules concentration resulted in chocolate with poorer snap and higher tendency to fat bloom formation. Whey protein microcapsules, having the largest diameter, resulted in chocolate with the lowest breaking force and melting enthalpy and the highest whitening index. In general, microcapsules addition did not require chocolate production modification and led to sensory acceptable product.

Characteristics and feasibility of olive oil-based diacylglycerol plastic fat for use in compound chocolate

With an aim to prepare the healthier functional chocolate, olive oil-based diacylglycerol plastic fat (ODAGP) was prepared by mixing olive oil-based diacylglycerol stearin (O-DAGS) and olive oil-based diacylglycerol olein (O-DAGO) as confectionery fat in compound chocolate. We reported the physicochemical properties of ODAGP and ODAGP-CB blends, and then evaluated their application potential in compound chocolate based on sensory, blooming property and polymorphic transition. ODAGP (40% O-DAGS) showed a wide plastic range (7.1-45.2%) and high component compatibility. The crystal properties results indicated that ODAGP mainly existed in stable β-forms (β₁ and β₂). On the other hand, the ODAGP-CB binary system containing 10-40% ODAGP displayed similar melt-in-mouth property and crystal polymorphism (Form V) to natural CB. Compound chocolate prepared with ODAGP-CB blends obtained satisfactory overall acceptability (score > 7.8) and showed stronger fat bloom resistance.

Dark chocolate: An overview of its biological activity, processing, and fortification approaches

Dark chocolate gets popularity for several decades due to its enormous health benefits. It contains several health-promoting factors (bioactive components - polyphenols, flavonoids, procyanidins, theobromines, etc, and vitamins and minerals) that positively modulate the immune system of human beings. It confers safeguards against cardiovascular diseases, certain types of cancers, and other brain-related disorders like Alzheimer's disease, Parkinson's disease, etc. Dark chocolate is considered a functional food due to its anti-diabetic, anti-inflammatory, and anti-microbial properties. It also has a well-established role in weight management and the alteration of a lipid profile to a healthy direction. But during the processing of dark chocolate, several nutrients are lost (polyphenol, flavonoids, flavan 3 ol, ascorbic acid, and thiamine). So, fortification would be an effective method of enhancing the overall nutrient content and also making the dark chocolate self-sufficient. Thus, the focus of this review study is to gather all the experimental studies done on dark chocolate fortification. Several ingredients were used for the fortification, such as fruits (mulberry, chokeberries, and elderberries), spices (cinnamon), phytosterols, peanut oil, probiotics (mainly Lactobacillus, bacillus spices), prebiotics (inulin, xanthan gum, and maltodextrin), flavonoids, flavan-3-ols, etc. Those fortifications were done to raise the total antioxidant content as well as essential fatty acid content simultaneously reducing total calorie content. Sometimes, the fortification was done to improve physical properties like viscosity, rheological propertiesand also improve overall consumer acceptance by modifying its bitter taste.

Chocolate flow behavior: Composition and process effects

Chocolate is a non-Newtonian substance, and such substance has different viscosities at different shear rates. Rheological evaluations have become indispensable instruments for characterizing final chocolate, forecasting product efficiency and consumer acceptance. During production, the different steps depend on a well-defined viscosity and yield stress. Furthermore, the characteristics of the final chocolate (the surface and mouth-feel) are directly related to the chocolate's viscous behavior. There is a demand for better understanding the variables affecting chocolates flow behavior. Current research realized great insight into the chocolate flow behavior in different processes such as refining, conching, and tempering. Also, the influence of formulation and particle characteristics on flow behavior of the intermediate product and the final product were discussed. Each stage of the production process: mixing, refining, conching and tempering involves modifications of macroscopic characteristics of the chocolate ingredients thus affecting the rheological attributes of the final product. Particle size distribution and ingredient composition play substantial roles in shaping its flow behavior and sensory perception. The rheological properties of chocolate provide substantial information for food scientists to improve and optimize their products and manufacturing processes. Nowadays, a thorough understanding of chocolate flow behavior is a necessity for food scientists and industry.

Chocolate as Carrier to Deliver Bioactive Ingredients: Current Advances and Future Perspectives

Consumer demand for healthier foods with improved taste and convenience has urged the food industry to develop functional foods added with bioactive ingredients that can supplement basic nutrition (food supplement) or exert a pharmacological effect (nutraceuticals). Chocolate could be used as an ideal carrier to deliver bioactive ingredients, mainly due to its high acceptability by consumers. However, a drawback of using chocolate as functional food is its high sugar content, which impedes its commercialization with the diabetic population. Therefore, there is need to develop sugar-free chocolate formulations added with bioactive ingredients. Nevertheless, sugar replacement and bioactive ingredients addition is a major technological challenge that affects texture, rheology, and sensory properties of chocolate. This review is designed as a practical guide for researchers and food industries to develop the next generation of functional chocolates. Different functional chocolate formulations, including sugar-free, are reviewed as potential carriers for the delivery of bioactive compounds. The physicochemical properties and sensory acceptability of the functional chocolates presented are also highlighted. Finally, future perspectives, such as the use of nanotechnology to improve the bioaccessibility and bioavailability of active ingredients, as well as the need for clinical trials to validate the pharmacological effect of functional chocolates, are also discussed.

Sugar-Free Milk Chocolate as a Carrier of Omega-3 Polyunsaturated Fatty Acids and Probiotics: A Potential Functional Food for the Diabetic Population

Chocolate is an adequate matrix to deliver bioactive ingredients. However, it contains high sugar levels, one of the leading causes of chronic degenerative diseases. This work aimed to evaluate the effects of milk chocolate reformulation with alternative sugar sweeteners (Sw; isomalt + stevia), probiotics (Prob), and ω-3 polyunsaturated fatty acids (PUFAs) on its physicochemical properties and consumers' acceptability. Lactobacillus plantarum 299v (L. p299v) and Lactobacillus acidophilus La3 (DSMZ 17742) were added as Prob strains, and fish oil (FO) was added as the source of ω-3 PUFAs. Prob addition resulted in chocolates with >2 × 107 colony forming unit (CFU) per serving size (12 g). Except for Prob, aw values of all treatments were <0.46. Sw and Sw + Prob presented the nearest values to the control in hardness, whereas Sw without FO increased fracturability. FO, Sw + FO, and Sw + Prob + FO contained 107.4 ± 12.84, 142.9 ± 17.9, and 133.78 ± 8.76 mg of ω-3 PUFAs per chocolate, respectively. Prob + FO increased the resistance of chocolate to shear stress, while Sw + FO showed a similar flow behavior to the control. The consumers' acceptability of Sw + Prob chocolate was adequate, while Sw + Prob + FO had higher acceptability than Prob + FO. Health benefits of reformulated milk chocolates requires further assessment by in vitro, in vivo and clinical studies.

Enrichment of dark chocolate with vitamin D3 (free or liposome) and assessment quality parameters

Liposomes are suitable carrier for bioactive components. Ethanol injection method was chosen for preparation liposomes included vitamin D₃ for addition into dark chocolate [5 µg/serving (10 g)]. Assessment the quality of prepared liposomes were performed by measurement particle size distribution, zeta potential, loading efficiency and FTIR. Loading efficiency was 62.58 ± 1.2%. It could be concluded the chosen method for liposome preparation was suitable. In vitro release of vitamin D₃ from liposome structure showed the release follow Korsmeyer-Peppas model. Fortified chocolate properties included Differential Scanning Calorimeter (DSC), color indexes, casson viscosity and sensory properties were evaluated. According to the results, there was no significant changes in all tested properties in fortified chocolate than control sample. Vitamin D₃ retention during storage time (0, 15, 30, 45, 60 and 70 days) were evaluated and results revealed there was better retention of vitamin D₃ in fortified samples with liposomes than free vitamin D₃. Observation showed addition both forms of vitamin D₃ (free or liposome) had no significant impact on color indexes, rheological properties, DSC parameters as well as sensory characteristics.

Red mombin (Spondias purpurea L.) seed flour as a functional component in chocolate brownies

The objective of the present study was to evaluate the technological properties of red mombin seed flour (RMSF) and its effect on the nutritional composition and physical properties of chocolate brownies. RMSF was incorporated at various levels (25%, 50%, 75%, and 100%) into the formulation, with control brownies produced using refined (white) wheat flour (WWF). Results demonstrated that the addition of RMSF was beneficial to dietary fiber and ash content. Mineral profiles were shown to be an important factor for recommended daily intake values. Moreover, the antioxidant activity in this dessert increased approximately 13% due to the addition of RMSF, thus allowing longer preservation of the product in face of oxidation. Regarding textural parameters, the lowest concentration (25%) was sufficient to improve chewiness, gumminess, cohesiveness and resilience. Therefore, the incorporation of RMSF in chocolate brownies was capable of completely replacing WWF, improving physical and nutritional characteristics.

Physicochemical Properties and Sensory Acceptability of a Next-Generation Functional Chocolate Added with Omega-3 Polyunsaturated Fatty Acids and Probiotics

In this study, a milk chocolate formulation was developed to serve as vehicle of Omega-3 (ω3) polyunsaturated fatty acids (PUFAs) and probiotics (L. plantarum 299v and L. rhamnosus GG). Fish oil (FO) was incorporated in chocolate as a source of ω3 PUFAs. Probiotics (Prob) and FO were added during tempering, obtaining chocolates with 76.0 ± 5.2 mg (FO1) or 195.8 ± 6.5 mg (FO2) of ω3 PUFAs, and >1 × 10⁶ CFU of Prob per chocolate portion (12 g). The physicochemical properties (rheological analysis, texture, surface instrumental color, aw, and fatty acid profile), and sensory acceptability of the formulations were determined. Prob and FO generated a decrease in L* and white index (WI) values. Except for Prob + FO2, all treatments showed a decrease in aw. Rheological parameters of FO1 and Prob + FO1 presented the most similar behavior as compared with the control. Prob or FO1 addition did not affect the overall consumer’s acceptability of chocolate; and when both nutraceuticals were combined (Prob + FO1) the product showed adequate overall acceptability. FO2 formulations were not considered adequate to maintain physicochemical properties and sensory acceptability of chocolate. Results indicated that milk chocolate is a suitable vehicle for delivering ω3 PUFAs and Prob, which are essential to enhance cognitive development in children.

Rheological, bioactive properties and sensory preferences of dark chocolates with partial incorporation of Sacha Inchi (Plukenetia volubilis L.) oil

We studied the effect of substituting partially, cocoa butter (CB) with Sacha Inchi (Plukenetia volubilis L.) oil (SIO) on rheology, bioactive properties, and sensory preferences in potentially functional chocolate. For this 70% dark chocolates were prepared and the CB was substituted with 1.5%, 3%, and 4.5% of SIO. Hardness and viscosity of the SIO-chocolates were significantly reduced compared to the control (5451 ± 658 g; 17.01 ± 0.94 Pa s, respectively). Total phenolic content remained constant while the antioxidant capacity increased up to IC₅₀ of 2.48 ± 0.10 as the content of SIO increased. The Casson yield stress and Casson plastic viscosity decreased as the amount of SIO increased. Chocolates with 4.5% SIO had a similar color, better glossiness, preferable snap attributes, and were more accepted (7.50 ± 0.08) compared to the control (p < 0.05), measured with a hedonic scale. Then, SIO can improve the bioactive properties of dark chocolates obtaining a potentially functional food with acceptable physicochemical characteristics. SIO can be considered as a new cocoa butter equivalent.

How unsaturated fatty acids and plant stanols affect sterols plasma level and cellular membranes? Review on model studies involving the Langmuir monolayer technique

The Langmuir monolayer technique has long been known for its usefulness to study the interaction between molecules and mimic cellular membranes to understand the mechanism of action of biologically relevant molecules. In this review we summarize the results that provided insight into the potential mechanism for lowering the plasma level of cholesterol by hypocholesterolemic substances (unsaturated fatty acids (UFAs) and phytocompounds) - in the aspect of prevention of atherosclerosis - and their effects on model biomembranes. The results on UFAs/cholesterol (oxysterols) interactions indicate that these systems are miscible and strongly interacting, contrary to immiscible systems containing saturated fatty acids. Lowering of cholesterol plasma level by UFAs was attributed to the strong affinity between UFAs and sterols, resulting in the formation of high stability complexes, in which sterols were bound and eliminated from the body. Studies on the effect of UFAs and plant sterols/stanols on simplified biomembranes (modeled as cholesterol/DPPC system) indicated that the studied hypocholesterolemic substances modify the biophysical properties of model membrane, affecting its fluidity and interactions between membrane components. Both UFAs and plant sterols/stanols were found to loosen interactions between DPPC and cholesterol and decrease membrane rigidity caused by the excess cholesterol in biomembrane, thus compensating strong condensing effect of cholesterol and restoring proper membrane fluidity, which is of utmost importance for normal cells functioning. The agreement between model - in vitro - studies and biological results prove the usefulness of the Langmuir monolayer technique, which helps in understanding the mode of action of biologically relevant substances.

Properties of dark chocolate enriched with free and encapsulated chlorogenic acids extracted from green coffee

Abstract To increase the functionality of dark chocolate, chlorogenic acids extracted from green coffee were added in free or encapsulated forms at different concentration (10, 20, 30, 40 and 50 mg/5 kg of free chlorogenic acids and equal quantity of encapsulated form). The extraction of chlorogenic acids was carried out by maceration of ground green coffee beans in distilled water (30 min at 80 °C), then, cooling, filtration and adsorption by active carbon were done. The final step was filtration and desorption from active carbon and rotary drying (at 60 °C and 120 rpm). Encapsulation of chlorogenic acids was done by coacervation of pectin and gelatin. For quality assessment, several analysis on chocolate samples were performed included color index and melting behavior by Differential Scanning Calorimeter. Flow behavior of the chocolate samples melted at 40 °C was determined using stress or strain controlled rheometer. The microstructure of the chocolate samples was analyzed by Scanning Electron Microscope technique at 500-1000x magnification. Particle size distribution and sensory evaluation was also performed. Results showed addition of free and encapsulated forms of chlorogenic acids decreased Tonset, Tpeak and ΔH of dark chocolate. Casson viscosity increased in the case of addition chlorogenic acids. Color indexes of chocolate samples were influenced by addition of chlorogenic acids. Particle size distribution decreased with addition of free form and increased when encapsulated form was added. Sensory characteristics were also influenced by chocolate formulation and samples included encapsulated chlorogenic acids exhibit better sensory properties than samples enriched with free form.

Characterization of gelatin/chitosan ploymer films integrated with docosahexaenoic acids fabricated by different methods

In this study, docosahexaenoic acid powder-enhanced gelatin-chitosan edible films were prepared by casting, electrospinning and coaxial electrospinning, respectively. The color (CR), transparency (UV), light transmission (UV), mechanical strength (TA-XT), thermal stability (DSC), crystalline structures (XRD), molecular interactions (FTIR), and microstructure (SEM) were assessed in the analytical research. The results of the research showed that the electrospinning process and the coaxial electrospinning process produced a smooth surface visible to by the naked eye and a uniform granular network structure in a unique film-forming manner, thereby exhibiting good water solubility and mechanical properties. In contrast, the casted film was smooth, transparent, and mechanically strong but poorly water soluble. It was also found that the addition of docosahexaenoic acid powder affected the optical, physical and mechanical properties of the film to varying degrees.