Zein-hyaluronic acid binary complex as a delivery vehicle of quercetagetin: Fabrication, structural characterization, physicochemical stability and in vitro release property

Fabrication of high internal phase emulsions (HIPEs) using pea protein isolate-hyaluronic acid-tannic acid complexes: Application of curcumin-loaded HIPEs as edible inks for 3D food printing

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H7-T1), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H7-T1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components.

Exploring gelation properties and structural features on 3D printability of compound proteins emulsion gels: Emphasizing pH-regulated non-covalent interactions with xanthan gum

Rational regulation of pH and xanthan gum (XG) concentration has the potential to modulate interactions among macromolecules and enhance 3D printability. This study investigated non-covalent interactions between XG and other components within compound proteins emulsion gel systems across varying pH values (4.0-8.0) and XG concentrations (0-1 wt%) and systematically explored impacts of gelation properties and structural features on 3D printability. The results of rheological and structural features indicated that pH-regulated non-covalent interactions were crucial for maintaining structural stability of emulsion gels with the addition of XG. The 3D printability of emulsion gels would be significantly improved through moderate depletion flocculation produced when XG concentration was 0.75 wt% at the pH 6.0. Mechanical properties like viscosity exhibited a strongly negative correlation with 3D printability, whereas structural stability showed a significantly positive correlation. Overall, this study provided theoretical insights for the development of emulsion gels for 3D printing by regulating non-covalent interactions.

A curcumin-loaded biopolymeric nanocomposite alleviates dextran sulfate sodium induced ulcerative colitis via suppression of inflammation and oxidative stress

Functional drugs nano delivery systems manufactured from natural active products are promising for the field of biomedicines. In this study, an anti-ulcerative colitis (UC) curcumin loaded biopolymeric nanocomposite (CZNH) was fabricated and investigated. CZNH nanocomposite was obtained using the anti-solvent precipitation method, wherein curcumin-loaded zein colloidal particles served as the core, while sodium casein (NaCas) and hyaluronic acid (HA) formed the outermost layer of CZNH nanocomposite. Fourier transform infrared (FT-IR) spectrum and transmission electron microscopy (TEM) findings demonstrated that CZNH nanocomposite was a double-layer spherical micelle (250 nm) resulting from the hydrogen bond interactions and electrostatic adsorptions between zein, NaCas, and HA. Furthermore, CZNH nanocomposite exhibited prominent resuspension and storage stability in aqueous solution, which can be stored at 4 °C for approximately 30 days. In vivo anti-UC studies showed that CZNH nanocomposite could effectively alleviate UC symptoms via mediating inflammatory factors [tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β), and IL-6], myeloperoxidase (MPO), and oxidative stress factor [malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px)]. This study suggested that the CZNH nanocomposite showed great promise as an efficient curcumin nanocarrier for UC therapy.

Preparation and characterization of tilapia protein isolate - Hyaluronic acid complexes using a pH-driven method for improving the stability of tilapia protein isolate emulsion

This study aimed to investigate the non-covalent complexation between hyaluronic acid (HA) and tilapia protein isolate (TPI) on the stability of oil-in-water (O/W) TPI emulsion. The results showed that HA binds to TPI through electrostatic, hydrophobic, and hydrogen bonding interactions, forming homogeneous hydrophilic TPI-HA complexes. The binding of HA promoted the structural folding of TPI and altered its secondary structure during pH neutralization. The TPI-HA complexes presented significantly improved EAI and ESI (P < 0.05) when the HA concentration was 0.8 % (w/v). Emulsion characterization showed that HA promoted the transfer of TPI to the O/W interface, forming an emulsion with excellent stability, which, combined with the high surface charge and strong spatial site resistance effect of HA, improved TPI emulsion stability. Therefore, non-covalent complexation with HA is an effective strategy to improve the stability of TPI emulsion.

Natural Biomolecule Ovomucin-Chitosan Oligosaccharide Self-Assembly Nanogel for Lutein Application Enhancement: Characterization, Environmental Stability and Bioavailability

As an essential nutrient, lutein (LUT) has the ability to aid in the prevention of eye diseases, cardiovascular diseases, and cancer. However, the application of LUT is largely restricted by its poor solubility and susceptibility to oxidative degradation. Thus, in this study, LUT-loaded nanogel (OVM-COS-LUT) was prepared by a self-assembly of ovomucin (OVM) and chitosan oligosaccharide (COS) to enhance the effective protection and bioavailability of LUT. The nanogel had excellent dispersion (PDI = 0.25) and an 89.96% LUT encapsulation rate. XRD crystal structure analysis confirmed that the encapsulated LUT maintained an amorphous morphology. In addition, the nanogel showed satisfactory stability with pH levels ranging from 2 to 9 and high ionic strengths (>100 mM). Even under long-term storage, the nanogel maintained an optimistic stabilization and protection capacity; its effective retention rates could reach 96.54%. In vitro, digestion simulation showed that the bioaccessibility and sustained release of OVM-COS-LUT nanogel was superior to that of free LUT. The nanogel provided significant antioxidant activity, and no significant harmful effects were detected in cytotoxicity analyses at higher concentrations. In summary, OVM-COS-LUT can be utilized as a potential safe oral and functional carrier for encapsulating LUT.

Nanoencapsulation and delivery of bioactive ingredients using zein nanocarriers: approaches, characterization, applications, and perspectives

Zein has garnered widespread attention as a versatile material for nanosized delivery systems due to its unique self-assembly properties, amphiphilicity, and biocompatibility characteristics. This review provides an overview of current approaches, characterizations, applications, and perspectives of nanoencapsulation and delivery of bioactive ingredients within zein-based nanocarriers. Various nanoencapsulation strategies for bioactive ingredients using various types of zein-based nanocarrier structures, including nanoparticles, nanofibers, nanoemulsions, and nanogels, are discussed in detail. Factors affecting the stability of zein nanocarriers and characterization methods of bioactive-loaded zein nanocarrier structures are highlighted. Additionally, current applications of zein nanocarriers loaded with bioactive ingredients are summarized. This review will serve as a guide for the selection of appropriate nanoencapsulation techniques within zein nanocarriers and a comprehensive understanding of zein-based nanocarriers for specific applications in the food, pharmaceutical, cosmetic, and agricultural industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01489-6.

Lysozyme amyloid fibril-chitosan double network hydrogel: Preparation, characterization, and application on inhibition of Nε-(carboxyethyl)lysine

Nε-(carboxyethyl)lysine (CML), a typical advanced glycosylation end product produced during the processing of meat under high temperature, poses health risks. Active substances like polyphenols are known to inhibit the formation of harmful products during the processing of food. In this study, our objective was to prepare a double network hydrogel (DN) loaded with gallic acid using amyloid fibers and chitosan as a rigid and flexible network, respectively. The network as well as the interactions between the two networks were observed and analyzed. Chitosan concentration was the key factor regulating the structure and properties of the DN. At a chitosan concentration of 0.7%wt, the structure of DN became dense and its mechanical properties were improved, with the loading capacity and loading efficiency being increased by 143.79 % and 128.21 %, compared with those of amyloid fibril alone. Furthermore, the digestibility of gallic acid in simulated intestinal fluid was increased by 215.10 %. Moreover, adding DN to the beef patties effectively inhibited the formation of CML in a dose-response dependent manner. Addition of 3 wt% DN resulted in the inhibitory rate of CML in roast beef patties reaching a high 73.09 %. The quality and palatability of beef patties were improved. These findings suggest that DN shows great potential as an application that may be utilized to deliver active substances aimed at inhibiting CML in the meat processing industry.

Modulation of pea protein isolate nanoparticles by interaction with OSA-corn starch: Enhancing the stability of the constructed Pickering emulsions

The impact of particle concentration (0.5-2.5%) on the stability of Pickering emulsions was investigated in this work. Pickering emulsion was prepared using pea protein isolate (PPI)/octenyl succinic anhydrate corn starch (OSA-CS) composite nanoparticles (PPI/OSA-CS) as stabilizers. PPI/OSA-CS was prepared with pH adjustment and ultrasonic treatment, and the particle size was 100.05 ± 0.46 nm. The formation of PPI/OSA-CS through hydrophobic interaction and hydrogen bond was confirmed by Fourier transform infrared spectroscopy, intrinsic fluorescence spectroscopy and dissociation analysis. The results indicated that the emulsion stabilized with composite nanoparticles at 1.5% particle concentration had smaller particle size and better stability than at other concentrations. This could be attributed to the presence of sufficient composite nanoparticles wrapped around the surface of oil droplets. At high temperature (100 °C) and high ionic strength (500 mM), the emulsion remained stable. These results provide a potential method for preparing a novel and stable Pickering emulsion, which could have important applications in various fields.

Development of sorghum arabinoxylan-soy protein isolate composite nanoparticles for delivery of curcumin: Effect of polysaccharide content on stability and in vitro digestibility

The purpose of this study was to fabricate composite nanoparticles using soy protein isolate (SPI) and sorghum bran arabinoxylan (AX) for the delivery of curcumin (Cur). The influences of AX concentrations on the physicochemical characteristic, stability and bioaccessibility of curcumin were investigated. The findings showed that the encapsulation efficiency of curcumin obviously increased upon incorporating AX in comparison to SPI-Cur particles. Hydrogen bonds and hydrophobic interactions were the primary driving forces for the formation of SPI-Cur-AX nanoparticles (SCA). SCA nanoparticles with 1.00 % AX exhibited a uniform size with orderly distribution, suggesting its remarkable physical stability due to the strengthened electrostatic repulsion. However, excessive AX led to aggregation of particles, a noticeable increase in size, and subsequently, a reduction in stability. Due to the heightened free radical scavenging capacity of sorghum AX, SCA nanoparticles exhibited superior antioxidant capabilities. Compared to free curcumin, encapsulation within composite particles significantly enhanced the retention rate and bioaccessibility of curcumin. This improvement was attributed to the potent emulsification ability of AX, which coordinated with bile salt to promote the transfer of curcumin into micelles. The research provides an effective strategy for developing food-grade delivery carriers aimed at enhancing dispersibility, stability and bioaccessibility of the fat-soluble bioactives.

Stability and encapsulation properties of daidzein in zein/carrageenan/sodium alginate nanoparticles with ultrasound treatment

This study aimed to prepare carrageenan/sodium alginate double-stabilized layers of zein nanoparticles loaded with daidzein using ultrasound technology to investigate the effect of ultrasound treatment on the stability of composite nanoparticles and encapsulation of daidzein. Compared with composite nanoparticles without ultrasound treatment, the encapsulation efficiency of nanoparticles was increased (90.36 %) after ultrasound treatment (320 W, 15 min). Ultrasound treatment reduced the particle size and PDI of nanoparticles and improved the stability and solubility of nanoparticles. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed that the nanoparticles treated with ultrasound were smooth spherical and uniformly distributed. Fourier transform infrared spectroscopy (FTIR) results showed that the main forces that form nanoparticles are hydrogen bonding, electrostatic interactions and hydrophobic interactions. Fluorescence and CD chromatography showed that ultrasound treatment alters the secondary structure of zein and maintains nanoparticle stability. Encapsulation of daidzein in nanocarriers with ultrasound treatment can effectively scavenge DPPH and ABTS free radicals, improve antioxidant activity, and realize the slow release of daidzein in the gastrointestinal tract. The results showed that ultrasonication helps the construction of hydrophobic bioactives delivery carriers and provides better protection for unstable bioactives.

Improved emulsifying properties of water-soluble myofibrillar proteins at acidic pH conditions: Emphasizing pH-regulated electrostatic interactions with chitosan

Water-soluble muscle protein with enhanced functionalities has attracted great interest for low-salt food design. Electrostatic interactions of chitosan (CS) with myofibrillar proteins (MP) in water-aqueous solution at acidic pHs (4.0-6.5) were investigated, and how pH regulated complex formation, microstructures, conformation changes, and emulsifying capacity was systematically explored. At pH 4.0-4.5, MP and CS were positively charged and displayed a co-soluble system, exhibiting small particles and high solubility. When the pH increased to near the isoelectric point (pI) of MP (pH 5.0-6.0), electrostatic interactions largely inhibited the aggregation of MP by forming smaller particle complexes. The flexible structures and improved amphiphilic properties promoted protein absorption at the oil-water interface, further improving the emulsion stability. When the pH increased to 6.5, large aggregates were formed causing poor functionalities. This study could provide great insights to further exploit meat-protein-based low-salt functional foods in novel food design.

Zein/hyaluronic acid nanoparticle stabilized Pickering emulsion for astaxanthin encapsulation

Pickering emulsions have attracted considerable attention owing to the stability and functionality. In this study, zein/hyaluronic acid (ZH) nanoparticles were prepared and applied for stabilizing astaxanthin encapsulated Pickering emulsions. By non-covalent interaction between Zein and hyaluronic acid (HA), the conformation of zein changed and therefore improved the wettability of ZH nanoparticles. Unlike the spherical zein nanoparticles, ZH nanoparticles possessed a cross-linked structure with rough surface. Confocal laser scanning microscopy indicated that the nanoparticles accumulated at the oil-water interface. The Pickering emulsion stabilized by ZH nanoparticles exhibited high viscoelasticity and a solid-like behavior, as well as excellent stability during the storage. In vitro digestion results revealed that the presence of HA coating prevented the emulsion from pepsin hydrolysis and achieved efficient delivery of astaxanthin. This work confirmed that Pickering emulsion stabilized by ZH nanoparticles could be used as an effective deliver system for bioactive substances.

Analysis of non-covalent interaction between β-lactoglobulin and hyaluronic acid under ultrasound-assisted treatment: Conformational structures and interfacial properties

Hyaluronic acid (HA) used as a food ingredient is gaining acceptance and popularity. However, the studies available for the effect of HA concentrations on the properties of β-lactoglobulin (β-LG) were limited. In this study, we investigated that the molecular characterization and functional properties of the complex formed by the non-covalent binding of β-LG and HA, as well as the ultrasound-assisted treatment at acidic pH. The optimal pH and ratio of β-LG/HA were set as 7 and 4:1, respectively. The fluorescence spectroscopy, circular dichroism spectroscopy, and molecular docking results revealed that the addition of HA and ultrasound induced a decrease in random coil and α-helix and an increase in β-sheet contents in β-LG. By the complexation with HA, the thermal stability, freezing stability, and antioxidant properties of β-LG were all improved under ultrasound treatment. The results of the present study can be useful for the modulation of HA based biopolymer complexes and the exploitation as encapsulating or structuring agents in food industry.

Preparation and characterization of particle-filled microgels by chemical cross-linking based on zein and carboxymethyl starch for delivering the quercetin

This work aimed to develop novel particle-filled microgels based on zein and carboxymethyl starch for delivering quercetin (Que). The anti-solvent precipitation and chemical cross-linking methods were combined to produce the zein-carboxymethyl starch particle-filled microgels (SM-Z). The critical finding of the study was that adding zein nanoparticles significantly improved the strength, water holding capacity, and thermal stability of carboxymethyl starch microgel (SM). Besides, SM-Z had good biodegradability, and the particle size was about 44-61 μm. SM-Z successfully encapsulated Que with a high encapsulation efficiency of 86.7 %. Que-loaded SM-Z (Q/SM-Z) significantly enhanced 30 d storage and UV light stability (up to 89.4 % retention rate) of Que than the Que-loaded SM (Q/SM). Q/SM-Z exhibited pH-responsive swelling behavior, and the swelling was greatest in the simulated intestinal fluid (pH = 7). Besides, the Q/SM-Z showed good stability in simulated gastric fluids and sustained release of Que in simulated intestinal fluids, 72.5 % Que was released at 8 h. During Que transport in Caco-2 cell monolayers, Q/SM (5.8 %) and Q/SM-Z (9.7 %) were significantly higher than free Que (1.93 %). Therefore, as an oral delivery system for hydrophobic active substances, SM-Z possesses good biodegradability and pH-responsive intestinal-targeted delivery capability, providing a new strategy for designing starch-based encapsulation materials.

Thiol-modified hyaluronic acid improves the physical stability of curcumin-zein nanoparticles by forming disulfide bonds with zein

Zein-based nanoparticles have been developed in the food industry. However, their poor pH stability and unfavorable ionic strength stability remain a challenge even with the use of polysaccharides (such as hyaluronic acid) as stabilizers. To address this shortcoming, an improved strategy based on the disulfide bonds between thiol-modified hyaluronic acid (HASH) and zein was proposed. In this study, curcumin-zein nanoparticles (ZNs-HASH) were prepared with HASH as a stabilizer. The ZNs-HASH displayed similar particle sizes and spherical structures with ZNs and ZNs-HA (HA as a stabilizer). The Fourier transform infrared spectroscopy demonstrated the formation of disulfide bonds between zein and HASH. Among the three formulations tested, ZNs-HASH exhibited the highest pH and salt ion stability and the strongest antioxidant capacity. This study provided new insights for the improvement of physical stability of zein nanoparticles and the development of oral bioactive substances by chemical modification of natural polysaccharides.

Tuning whey protein isolate/hyaluronic acid emulsion gel structure to enhance quercetin bioaccessibility and in vitro digestive characteristics

Quercetin (Que), a health-promoting polyphenol, has limited applicability in food products due to its susceptibility to degradation in the gastrointestinal tract. To overcome this problem, Que-loaded emulsion gels were produced using whey protein isolate (WPI) and hyaluronic acid (HA) by combining heating and CaCl2 treatment. The effects of HA addition on the structural and rheological properties of the emulsion gels were evaluated, and the protective effect of the gel on Que under simulated digestion was investigated in vitro. Microstructural observations indicated that HA leads to a more compact and uniform network structure, which significantly enhances the textural and rheological properties of emulsion gels. In vitro digestion experiments revealed that WPI-HA emulsion gels exhibited a higher Que bioaccessibility (55.01%) compared to that produced by WPI alone (21.26%). This innovative delivery carrier has potential applications in food products to accomplish sustained nutrient release along with improved stability.

Toward function starch nanogels by self-assembly of polysaccharide and protein: From synthesis to potential for polyphenol delivery

Nanogels formed by self-assembly of natural proteins and polysaccharides have attracted great interest as potential carriers of bioactive molecules. Herein, we reported that carboxymethyl starch-lysozyme nanogels (CMS-Ly NGs) were prepared using carboxymethyl starch and lysozyme by green and facile electrostatic self-assembly, and the nanogels served as epigallocatechin gallate (EGCG) delivery systems. The dimensions and structure of the prepared starch-based nanogels (i.e., CMS-Ly NGs) were characterized by dynamic light scattering (DLS), ζ-potential, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and thermal gravimetric analyzer (TGA). FT-IR and 1H NMR spectra together confirmed the formation of CMS; FT-IR spectra confirmed the formation of CMS-Ly NGs; XRD spectra confirmed the disruption of the crystal structure of lysozyme after electrostatic self-assembly with CMS, and further confirmed the formation of nanogels. TGA demonstrated the thermal stability of nanogels. More importantly, the nanogels showed a high EGCG encapsulation rate of 80.0 ± 1.4 %. The CMS-Ly NGs encapsulated with EGCG exhibited regular spherical structure and stable particle size. Under the simulated gastrointestinal environmental conditions, CMS-Ly NGs encapsulated with EGCG showed the controlled release potential, which increased its utilization. Additionally, anthocyanins can also be encapsulated in CMS-Ly NGs and showed slow-release properties during gastrointestinal digestion in the same way. Cytotoxicity assay also demonstrated good biocompatibility between CMS-Ly NGs and CMS-Ly NGs encapsulated with EGCG. The findings of this research suggested the potential application of protein and polysaccharides-based nanogels in the delivery system of bioactive compounds.

Zein-maltodextrin nanocomplex based dissolving microneedle: A promising approach for Paliperidone palmitate delivery

Researchers are looking at microneedle devices as a possible solution to the problems with poor patient compliance and severe gastrointestinal side effects associated with conventional oral or injectable techniques for treating schizophrenia. Microneedles (MNs) may be an effective approach for transdermal drug delivery of antipsychotic drugs. We fabricated polyvinyl alcohol (PVA) microneedles loaded with paliperidone palmitate (PLDN) nanocomplex and studied their therapeutic potency for schizophrenia. We demonstrated that PLDN nanocomplex-loaded MNs had a pyramidal shape with high mechanical strength, which allowed us to successfully deliver PLDN into the skin and improve permeation behavior ex-vivo. Microneedling enhanced the concentration of PLDN in plasma and brain tissue as compared with the plain drug as observed. In addition, the therapeutic effectiveness was significantly improved by MNs with the capability of extended release. According to the findings of our study, the nanocomplex-loaded microneedle-mediated transdermal delivery of PLDN has the potential to be a novel treatment for schizophrenia.

Fucoidan/hyaluronic acid cross-linked zein nanoparticles loaded with fisetin as a novel targeted nanotherapy for oral cancer

Fisetin (FS) is an anticancer drug having potential role in oral tumors management. However, its clinical application is limited due to its hydrophobicity and instability. Bioactive polymers-based nanosystems have a great potential in cancer therapy. Herein, different biopolymers were selected for their anticancer activity and targeting ability for nanoparticles preparation namely; fucoidan (FU), zein (Zn) and hyaluronic acid (HA). The selected FS-loaded cross-linked Zn nanoparticles (ZFH) which contains HA& FU for Zn nanoparticles stabilization showed the most suitable particle size (196 ± 6.53 nm), mean surface net charge (-38.8 ± 1.47 mV) and entrapment efficiency (98 ± 1.2 %). This is the first study to utilize both HA &FU not only for stabilization but also for dual targeting effect due to their targeting ability to multiple tumor targets. In-vitro anticancer activity of ZHF revealed remarkable uptake by SCC-4 cells with significant cytotoxic action. Further, ZHF was appraised using 4-nitroquinoline 1-oxide (4-NQO)-induced oral cancer in-vivo; ZHF significantly reduced OSCC-specific serum biomarkers levels, histologic tumor grade and increased caspase-3 level. Moreover, potential of destroying two key tumor regulatory cells; TECs and CSCs, was evaluated using their specific markers. The elaborated ZFH nanoparticles could be considered as promising targeted nanotherapy for oral cancer treatment with enhanced efficacy and survival rate.

Berberine-loaded zein/hyaluronic acid composite nanoparticles for efficient brain uptake to alleviate neuro-degeneration in the pilocarpine model of epilepsy

Berberine hydrochloride is a plant alkaloid with versatile medicinal applications, yet it has suffered from multiple limitations in its usage. Nonetheless, the acknowledged role of berberine in controlling seizures has fuelled the need to develop a nanosystem capable of delivering it safely and efficiently to the brain. Consequently, zein and hyaluronic acid were chosen for this purpose, and about twenty formulations with different preliminary factors were screened. Afterward, three promising formulations were loaded with berberine and characterized to select an optimum formulation for further in vivo inspection. The B2 formula of particle size of 297.2 nm ± 1.86 and % entrapment efficiency of 83.75% ± 1.39 has succeeded in the increment of the brain uptake of berberine. Moreover, compared to free berberine suspension, the severity of pilocarpine-induced status epilepticus in rats was depleted after the subcutaneous administration of B2. The hippocampal tissue of rats receiving B2 showed signs of reduced neuro-degeneration, remarkably lower expression levels of COX-2 and TNF-α, and enhanced antioxidant activity. Finally, the relative safety of the developed system was determined after searching for any sign of intoxication or behavioral changes. In conclusion, the developed berberine loaded composite nanoparticles successfully delivered berberine across the BBB securely to ameliorate the deteriorating impact of pilocarpine-induced epilepsy.

HPMC films functionalized by zein/carboxymethyl tamarind gum stabilized Pickering emulsions: Influence of carboxymethylation degree

Pickering emulsions are promising systems to act as carriers of active hydrophobic components, and to improve compatibility and the water vapor barrier properties of bio-based films. This study aimed to investigated the effects of cinnamon essential oil Pickering emulsions (CEOEs) using zein/carboxymethyl tamarind gum as stabilizers on the mechanical, barrier, antibacterial and antioxidant properties of Hydroxypropyl methyl cellulose (HPMC) films, and assessed the influence of carboxymethylation degree. In addition, the effect of the packaging was studied on the shelf life of cherry tomatoes. Results showed that the droplet size reduced approximately from 93.03 to 10.59 μm with the increasing degree of substitution (DS), greatly facilitating the droplet uniform distribution in film matrix. Moreover, with the addition of CEOEs, significant increase was observed with the tensile strength from 8.46 to 25.41 MPa, and the water vapor permeability decreased from 6.18 × 10^-10 to 4.24 × 10^-10 g·m^-1·s^-1·Pa^-1. The films exhibited good UV barrier properties without sacrificing the transparency after adding CEO. Furthermore, the antibacterial and antioxidant activities of the prepared films have also been greatly improved. Consequently, the CEOEs was an ideal alternative for incorporation with HPMC based films for increasing the shelf life of cherry tomatoes.

Preparation and characterization of novel composite nanoparticles using zein and hyaluronic acid for efficient delivery of naringenin

Hyaluronic acid (HA), a polymer mainly found in animal tissues, plays an important role in food research. In this study, it was used for delivery improvement of naringenin (NAR) by loading it into zein nanoparticles using an anti-solvent precipitation method. The optimal Nar/zein-HA nanoparticles were uniformly spherical with particle sizes of 209.2 ± 1.9 nm, polydispersity indexes of 0.146 ± 0.032 and zeta-potentials of -19.0 ± 0.7 mV. Moreover, the microstructure of Nar/zein-HA nanoparticles was maintained primarily by hydrophobic, electrostatic, and hydrogen-bonding interactions. Furthermore, Nar/zein-HA nanoparticles showed favorable physical stability and enhanced encapsulation efficiency. Additionally, the antioxidant capacity and release in simulated gastrointestinal digestion of Nar were significantly improved. Overall, these findings indicate that the delivery efficiency of Nar was improved by formulation of ternary nanoparticles.

Emulsions stabilised by casein and hyaluronic acid: Effects of high intensity ultrasound on the stability and vitamin E digestive characteristics

This study aimed to prepare an emulsion stabilised by an ultrasound-treated casein (CAS)-hyaluronic acid (HA) complex and to protect vitamin E during in vitro digestion. It was found that high-intensity ultrasound (HIU) treatment significantly changed the hydrogen bonding, electrostatic interaction and hydrophobic interaction between CAS and HA, reduced the particle size of the CAS-HA complex, increased the intermolecular electrostatic repulsion, and thus significantly improved the emulsifying properties of the CAS-HA complex. Meanwhile, the creaming index (CI) and confocal laser scanning microscopy images showed that the stability of the CAS-HA-stabilised emulsion was the best when treated at 150 W for 10 min, which could be attributed to the enhanced adsorption capacity of the CAS-HA complex at the oil-water interface and the viscosity of the formed emulsion. In vitro digestion experiments revealed that the emulsion stabilised by the ultrasound-treated CAS-HA complex had a good protective effect on vitamin E. This study is significant for the development of emulsions for the delivery of lipophilic nutrients.

Biodegradable Polymeric Nanoparticles Loaded with Flavonoids: A Promising Therapy for Inflammatory Bowel Disease

Inflammatory bowel disease (IBD) is a group of disorders that cause chronic non-specific inflammation in the gastrointestinal (GI) tract, primarily affecting the ileum and colon. The incidence of IBD has risen sharply in recent years. Despite continuous research efforts over the past decades, the aetiology of IBD is still not fully understood and only a limited number of drugs are available for its treatment. Flavonoids, a ubiquitous class of natural chemicals found in plants, have been widely used in the prevention and treatment of IBD. However, their therapeutic efficacy is unsatisfactory due to poor solubility, instability, rapid metabolism, and rapid systemic elimination. With the development of nanomedicine, nanocarriers can efficiently encapsulate various flavonoids and subsequently form nanoparticles (NPs), which greatly improves the stability and bioavailability of flavonoids. Recently, progress has also been made in the methodology of biodegradable polymers that can be used to fabricate NPs. As a result, NPs can significantly enhance the preventive or therapeutic effects of flavonoids on IBD. In this review, we aim to evaluate the therapeutic effect of flavonoid NPs on IBD. Furthermore, we discuss possible challenges and future perspectives.

Enhancing the stability of oil-in-water emulsions by non-covalent interaction between whey protein isolate and hyaluronic acid

This study aimed to investigate the effect of non-covalent interactions between different concentrations (0.1-1.2 %, w/v) of hyaluronic acid (HA) and 3 % (w/v) whey protein isolate (WPI) on the stability of oil-in-water emulsions. Non-covalent interactions between WPI and HA were detected using Fourier-transform infrared spectroscopy. The addition of HA increased the electrostatic repulsion between molecules and reduced the particle size of WPI. Circular dichroism spectroscopy results indicated that the addition of HA caused an increase in β-sheet content and a decrease in α-helix and random coil content in WPI. Moreover, HA increased the emulsion viscosity and strength of the interfacial network structure. Micrographs obtained using confocal laser scanning microscopy indicated that the emulsion with 0.8 % (w/v) HA exhibited good dispersion and homogeneity after storage for 14 d. Complexation with HA significantly altered the rheological and emulsifying properties of WPI, providing an emulsion with excellent stability under heating treatment, freeze-thawing treatment and centrifugation. The results provide a potential for HA application in emulsified foods.

The thermal resistance and targeting release of zein-sodium alginate binary complexes as a vehicle for the oral delivery of riboflavin

Riboflavin (RF) is one kind of vitamin B, which has low bioavailability due to the low water solubility and the high photosensitivity during food processing and storage. The anti-solvent precipitation method was applied to fabricate a zein-sodium alginate (SA) binary complexes delivery system with the loading of RF, which was aimed to enhance the delivery efficiency, stability, and controlled release of RF in the gastrointestinal (GI) tract. The formation mechanism, physicochemical properties as well as the digestion behaviors were investigated. The incorporation of SA significantly increased the diameter and decreased the surface positive charge of the nanoparticles. The surface morphology of the nanoparticles was characterized using the scanning electron microscope. The FTIR analysis revealed that the electrostatic attraction was the dominant binding force in the formation of the zein-SA binary complexes nanoparticles. In addition, the study on the in vitro release process showed that the zein-SA nanoparticles could delay the release of the RF under the simulated GI tract conditions, which improved their oral bioavailability. In summary, the zein-SA nanoparticle is an effective vehicle for the oral delivery of RF as well as other vitamins and bioactives in the applications of food and nutrition.

Encapsulation of vitexin-rhamnoside based on zein/pectin nanoparticles improved its stability and bioavailability

To improve the solubility, stability, and bioavailability of vitexin-rhamnoside (VR) isolated from hawthorn, it was encapsulated by the zein-pectin nanoparticles system. When the mass ratio of zein to pectin was 1:4, the particle size of nanoparticles was 222.7 nm, and the encapsulation efficiency of VR was 67%. Analysis with the scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) revealed that the zein-VR-pectin nanoparticles were spherical and uniformly distributed. The hydrogen bonding and electrostatic interactions were the main forces to assemble the nanoparticles. The nanoparticle had good stability at pH 3-8.5 with particle sizes ranging from 234 to 251 nm, and the nanoparticles were able to resist the relatively lower ionic strength. In vitro simulated digestion and rat in vivo intestinal perfusion experiments showed that the nanoparticles exhibited significant slow-release properties and the highest absorption rate in the duodenal segment of rats, with Ka and Papp of 0.830 ± 0.11 and 17.004 ± 1.09. These results provided a theoretical and technological approach for the construction of flavonoids delivery system with slow-release properties and improved bioavailability.

Colloidal Polyelectrolyte Complexes from Hyaluronic Acid: Preparation and Biomedical Applications

Hyaluronic acid (HA) is a naturally occurring polysaccharide which has been extensively exploited in biomedical fields owing to its outstanding biocompatibility. Self-assembly of HA and polycations through electrostatic interactions can generate colloidal polyelectrolyte complexes (PECs), which can offer a wide range of applications while being relatively simple to prepare with rapid and "green" processes. The advantages of colloidal HA-based PECs stem from the combined benefits of nanomedicine, green chemistry, and the inherent properties of HA, namely high biocompatibility, biodegradability, and biological targeting capability. Accordingly, colloidal PECs from HA have received increasing attention in the recent years as high-performance materials for biomedical applications. Considering their potential, this review is aimed to provide a comprehensive understanding of colloidal PECs from HA in complex with polycations, from the most fundamental aspects of the preparation process to their various biomedical applications, notably as nanocarriers for delivering small molecule drugs, nucleic acids, peptides, proteins, and bioimaging agents or the construction of multifunctional platforms.

Biomaterials and Extracellular Vesicle Delivery: Current Status, Applications and Challenges

In this review, we will discuss the current status of extracellular vesicle (EV) delivery via biopolymeric scaffolds for therapeutic applications and the challenges associated with the development of these functionalized scaffolds. EVs are cell-derived membranous structures and are involved in many physiological processes. Naïve and engineered EVs have much therapeutic potential, but proper delivery systems are required to prevent non-specific and off-target effects. Targeted and site-specific delivery using polymeric scaffolds can address these limitations. EV delivery with scaffolds has shown improvements in tissue remodeling, wound healing, bone healing, immunomodulation, and vascular performance. Thus, EV delivery via biopolymeric scaffolds is becoming an increasingly popular approach to tissue engineering. Although there are many types of natural and synthetic biopolymers, the overarching goal for many tissue engineers is to utilize biopolymers to restore defects and function as well as support host regeneration. Functionalizing biopolymers by incorporating EVs works toward this goal. Throughout this review, we will characterize extracellular vesicles, examine various biopolymers as a vehicle for EV delivery for therapeutic purposes, potential mechanisms by which EVs exert their effects, EV delivery for tissue repair and immunomodulation, and the challenges associated with the use of EVs in scaffolds.

Preparation and Characterization of Rutin–Loaded Zein–Carboxymethyl Starch Nanoparticles

In this work, rutin (RT)–loaded zein–carboxymethyl starch (CMS) nanoparticles were successfully prepared by the antisolvent precipitation method. The effect of CMS on composite nanoparticles at different concentrations was studied. When the ratio of zein–RT–CMS was 10:1:30, the encapsulation efficiency (EE) was the highest, reaching 73.5%. At this ratio, the size of the composite nanoparticles was 196.47 nm, and the PDI was 0.13, showing excellent dispersibility. The results of fluorescence spectroscopy, FTIR, XRD, and CD showed that electrostatic interaction, hydrogen bonding, and hydrophobic interaction were the main driving forces for the formation of nanoparticles. It can be seen from the FE–SEM images that the zein–RT–CMS nanoparticles were spherical. With the increase in the CMS concentration, the particles gradually embedded in the cross–linked network of CMS (10:1:50). After RT was loaded on zein–CMS nanoparticles, the thermal stability and pH stability of RT were improved. The results showed that zein–CMS was an excellent encapsulation material for bioactive substances.

Development of self-assembled zein-fucoidan complex nanoparticles as a delivery system for resveratrol

Resveratrol is a well-studied dietary polyphenol with diverse health-promoting bioactivities. However, the aqueous insolubility and chemical instability of resveratrol hamper its practical application. This study set out to address these limitations by constructing zein-fucoidan composite nanoparticles as a delivery system of resveratrol. The optimized resveratrol-loaded zein-fucoidan particles (RE-ZFP) were obtained at zein-to-fucoidan ratio of 2:1 (w/w) and zein-to-resveratrol ratio of 10:1 (w/w), and RE-ZFP showed evenly distributed and smoothly spherical microstructures, mean particle size of 121 nm, ζ-potential of - 41 mV, encapsulation efficiency for resveratrol of 95.4%. Electrostatic, steric, hydrophobic, and hydrogen-bonding interactions were major forces required to form RE-ZFP. In addition, RE-ZFP exhibited greater photostability and colloidal stability (including pH, ionic, and storage stabilities) than resveratrol-loaded zein particles (RE-ZP). Particularly, RE-ZFP showed fairly good pH stability. Moreover, zein-fucoidan-based delivery system exhibited a controlled release of resveratrol under in vitro digestion. Finally, zein-fucoidan nanocarriers presented extremely low cytotoxicity to HIEC-6 cells. All the findings demonstrate that the zein-fucoidan nanoparticles developed in the current work will be a prospective strategy for loading resveratrol and other hydrophobic bioactive ingredients and thus extending their application in nutraceuticals or pharmaceuticals.

Hyaluronic acid and human/bovine serum albumin shelled nanocapsules: Interaction with mucins and in vitro digestibility of interfacial films

Liquid lipid nanocapsules are oil droplets surrounded by a protective shell, which enable high load and allow controlled delivery of lipophilic compounds. However, their use in food formulations requires analysing their digestibility and interaction with mucin. Here, serum albumins and hyaluronic acid shelled olive oil nanocapsules are analysed to discern differences between human and bovine variants, the latter usually used as model system. Interfacial interaction of albumins and hyaluronic acid reveals that human albumin presents limited conformational changes upon adsorption, which increase by complexation with the polysaccharide present at the interface. The latter also promotes hydrophobic interactions with mucin, especially at pH 3 and protects albumin interfacial layer under in vitro gastric digestion. The interfacial unfolding induced in human albumin by hyaluronic acid facilitates in vitro lipolysis while its limited conformational changes provide the largest protection against in vitro lipolysis.

Improvement of Storage Stability of Zein-Based Pickering Emulsions by the Combination of Konjac Glucomannan and L-Lysine

In this work, L-lysine (Lys) was employed together with konjac glucomannan (KGM) to fabricate zein colloidal particles (ZCPs) aimed at enhancing the storage stability of Pickering emulsions. With the addition of Lys, zein-Lys colloidal particles (ZLCPs) and zein-Lys-KGM (ZLKCPs) exhibited smaller particle size (133.64 ± 1.43, 162.54 ± 3.51 nm), polydispersity index (PDI) (0.10 ± 0.029, 0.13 ± 0.022), π value, and more adsorbed protein. Meanwhile, KGM underwent deamidation in an alkaline solution, so the emulsions stabilized by ZLKCPs exhibited a solid gel-like structure with higher storage modulus (G′) and loss modulus (G′′), leading to lower fluidity and better stability. The synergistic effects of Lys and KGM improved the stability of the emulsion. Hydrophobic interactions and hydrogen bonds were the main driving forces forming colloidal particles, which were determined by driving force analysis.

Nanoencapsulation of Thyme Essential Oils: Formulation, Characterization, Storage Stability, and Biological Activity

This study aimed to improve the effectiveness of Thymus capitatus and Thymus algeriensis essential oils (EOs), as food preservatives, through their encapsulation in different delivery systems (DSs), namely nanoemulsions and biopolymeric nanoparticles. DSs’ preparation is tailored to enhance not only physical stability but also resulting Eos’ antioxidant and antibacterial activities through different fabrication methods (high-pressure homogenization emulsification or antisolvent precipitation) and using different emulsifiers and stabilizers. DSs are characterized in terms of droplet size distribution, ζ-potential, and stability over time, as well as antioxidant and antibacterial activities of encapsulated EOs. The antioxidant activity was studied by the FRAP assay; the antibacterial activity was evaluated by the well diffusion method. EOs of different compositions were tested, namely two EOs extracted from Thymus capitatus, harvested from Tunisia during different periods of the year (TC1 and TC2), and one EO extracted from Thymus algeriensis (TA). The composition of TC1 was significantly richer in carvacrol than TC2 and TA. The most stable formulation was the zein-based nanoparticles prepared with TC1 and stabilized with maltodextrins, which exhibit droplet size, polydispersity index, ζ-potential, and encapsulation efficiency of 74.7 nm, 0.14, 38.7 mV, and 99.66%, respectively. This formulation led also to an improvement in the resulting antioxidant (60.69 µg/mg vs. 57.67 µg/mg for non-encapsulated TC1) and antibacterial (inhibition diameters varying between 12 and 33 mm vs. a range between 12 and 28 mm for non-encapsulated TC1) activities of EO. This formulation offers a promising option for the effective use of natural antibacterial bioactive molecules in the food industry against pathogenic and spoilage bacteria.

Zein Microparticles and Nanoparticles as Drug Delivery Systems

Zein is a natural, biocompatible, and biodegradable polymer widely used in the pharmaceutical, biomedical, and packaging fields because of its low water vapor permeability, antibacterial activity, and hydrophobicity. It is a vegetal protein extracted from renewable resources (it is the major storage protein from corn). There has been growing attention to producing zein-based drug delivery systems in the recent years. Being a hydrophobic biopolymer, it is used in the controlled and targeted delivery of active principles. This review examines the present-day landscape of zein-based microparticles and nanoparticles, focusing on the different techniques used to obtain particles, the optimization of process parameters, advantages, disadvantages, and final applications.

Delivery of Curcumin Using Zein-Gum Arabic-Tannic Acid Composite Particles: Fabrication, Characterization, and in vitro Release Properties

The application of curcumin (Cur) in fat-free food is limited due to its poor water solubility, stability, and bioaccessibility. In this study, zein-gum arabic-tannic acid (zein-GA-TA) composite particles with high physical stability were fabricated to deliver Cur (ZGT-Cur). Their stability and in vitro release properties were also evaluated. The results showed that the thermal and photochemical stability of Cur was improved after loading into composite particles. Meanwhile, the retention rate of Cur in ZGT-Cur composite particles was enhanced compared with Z-Cur or ZG-Cur particles. Fourier transform infrared (FTIR) spectroscopy confirmed that the hydrogen bond within the particles was greatly enhanced after the addition of tannic acid (TA). The in vitro antioxidant activity of Cur in ZGT-Cur composite particles was higher in terms of 2,2'-azino-bis (ABTS) (93.64%) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) (50.41%) compared with Z-Cur or ZG-Cur particles. The bioaccessibility of Cur in ZGT-Cur composite particles was 8.97 times higher than that of free Cur. Therefore, the particles designed in this study will broaden the application of Cur in the food industry by improving its stability and bioaccessibility.

Lipid oxidation and in vitro digestion of pickering emulsion based on zein-adzuki bean seed coat polyphenol covalent crosslinking nanoparticles

This study first used adzuki bean seed coat polyphenol (ABSCP) to modify zein and form covalent nanoparticles (ZAP) and used ZAP as an emulsifier to stabilize Pickering emulsion (ZAE). The results showed that the ratio of zein-ABSCP controlled the physicochemical properties of the two compounds. ZAP could be absorbed on the water-oil surface and stabilized ZAE, which presented as a non-Newtonian fluid state with good rheological properties. The addition of ABSCP inhibited lipid oxidation in a dose-dependent manner, as verified through the analysis of accelerated oxidation experiments (50 °C, 20 days). In in vitro gastrointestinal digestion of ZAE showed that free fatty acids (FFA) release gradually decreased with ABSCP concentration increasing. Moreover, ABSCP gave ZAE a strong red-yellow color, which allowed ZAE to be used for specific applications (e.g., natural pigments). Our findings make it feasible to develope functional food and food-grade delivery systems made of protein-plant polyphenols nanoparticles.