Adsorption isotherm studies on the interaction between polyphenols and apple cell walls: Effects of variety, heating and drying

Improving complexation of puerarin with kudzu starch by various ultrasonic pretreatment: Interaction mechanism analysis

The industrial preparation of kudzu starch (KS) significantly reduces the remaining of flavonoids like puerarin (PU) in the product, weakening its biological activity and making pre-treatments on kudzu crucial. Ultrasonic technique, widely used for modifying biomolecules, can enhance nutrient interactions like those between starch and polyphenols in foods. Thus, a puerarin-kudzu starch (PKS) complex was prepared with the introduction of ultrasonic pretreatment. The results indicated that sonication increased the binding of PU to KS from 0.399 ± 0.01 to 0.609 ± 0.05 mg/g. Particle size analysis and SEM revealed that the particles of the ultrasonic puerarin-kudzu starch complex (UPKS) were larger than those of the untreated complexes. XRD, UV-vis, and FT-IR spectroscopic analyses indicated that hydrogen bonding primarily governs the interaction between PU and KS. Additionally, incorporating PU decreased the starch structure's orderliness, while ultrasonic treatment altered the helical configuration of straight-chain starch, leading to the formation of a new, ordered structure through the creation of new hydrogen bonds. Additionally, gels formed from UPKS exhibited higher viscosity, elasticity, and shear stress, suggesting that ultrasound significantly altered the intermolecular interactions between PKS. In conclusion, the use of ultrasound under optimal conditions has demonstrated its effectiveness in preparing PKS complexes, highlighting its significant potential to produce high value-added kudzu-based products.

The interaction of polyphenols-polysaccharides and their applications: A review

Polyphenols, as important secondary metabolites in nature, are widely distributed in vegetables, fruits, grains, and other foods. Polyphenols have attracted widespread attention in the food industry and nutrition due to their unique structure and various biological activities. However, the health benefits of polyphenols are compromised owing to their structural instability and sensitivity to the external environment. The interaction between polyphenols and polysaccharides largely determined the stability and functional characteristics of polyphenols in food processing and storage. Thus, this topic has attracted widespread attention in recent years. The main purposes of this article are as follows: 1) to review the interaction mechanisms of polyphenols and polysaccharides including non-covalent and covalent bonds; 2) to comprehensively analyze the influencing factors of the interaction between polyphenols and polysaccharides, and introduce the effects of their interaction on the properties of polyphenols; 3) to systematically summarize the applications of interaction between polyphenols and polysaccharides. The findings can provide the important reference and theoretical support for the application of polyphenols and polysaccharides in food industry.

Tannic acid-enriched nanocellulose hydrogels improve physical and oxidative stability of high-internal-phase Pickering emulsions

A cellulose suspension and tannic acid (TA) were co-sonicated to prepare TA-incorporated nanocellulose hydrogels with the aim of improving the physical and oxidative stability of high-internal-phase emulsions (HIPEs). Cellulose nanocrystal (CNC) hydrogels were used to stabilize HIPEs, relying on the interfacial adsorption behavior of CNCs and the reversible gelation properties of hydrogels. TA was incorporated due to its ability to improve emulsification performance and antioxidant properties. Introducing TA enhanced the gel strength of hydrogels by decreasing the interfibrillar distance. The utilization of CNC-TA hydrogels effectively improved physical properties of HIPEs. This improvement included a reduction in droplet size from the initial 103.41 μm to 39.66 μm, an enhancement of the gel structure, and an improvement in storage stability. A denser and orderly interfacial structure was formed in CNCs-TA hydrogel stabilized HIPEs due to anchoring TA at the interface driven by the hydrogen-bonding interaction between CNCs and TA. This densely interfacial layer with good antioxidant activity markedly enhanced the oxidative stability of emulsions, as evidenced by the low level of oxidation products in HIPEs. This study has the potential to extend the utilization of CNC-stabilized emulsions to new applications in the food, cosmetic, and pharmaceutical industries.

Surface Modification of Okara Cellulose Crystals with Phenolic Acids to Prepare Multifunction Emulsifier with Antioxidant Capacity and Lipolysis Retardation Effect

Emulsion-based foods are widely consumed, and their characteristics involving colloidal and oxidative stabilities should be considered. The fabrication of the interfaces by selecting the emulsifier may improve stability and trigger lipolysis, thereby reducing energy uptake from the emulsified food. The present work aimed to develop Okara cellulose crystals (OCs) as a multifunction emulsifier to preserve the physical and chemical stability of a Pickering emulsion via surface modification with phenolic acids. The modification of OC was performed by grafting with the selected phenolics to produce OC-gallic acid (OC-G) and OC-tannic acid (OC-T) complexes. There was a higher phenolic loading efficiency when the OC reacted with gallic acid (ca. 70%) than with tannic acid (ca. 50%). This trend was concomitant with better antioxidant activity of the OC-G than OC-T. Surface modification based on grafting with phenolic acids improved capability of the OC to enhance both the colloidal and oxidative stability of the emulsion. In addition, the cellulosic materials had a retardation effect on the in vitro lipolysis compared to a protein-stabilized emulsion. Surface modification by grafting with phenolic acids successfully provided OC as an innovative emulsifier to promote physico-chemical stability and lower lipolysis of the emulsion.

The Use of Fruit and Vegetable by-Products as Enhancers of Health Status of Piglets after Weaning: The Role of Bioactive Compounds from Apple and Carrot Industrial Wastes

At weaning, piglets are exposed to a large variety of stressors, from environmental/behavioral factors to nutritional stress. Weaning transition affects the gastrointestinal tract especially, resulting in specific disturbances at the level of intestinal morphology, barrier function and integrity, mucosal immunity and gut microbiota. All these alterations are associated with intestinal inflammation, oxidative stress and perturbation of intracellular signaling pathways. The nutritional management of the weaning period aims to achieve the reinforcement of intestinal integrity and functioning to positively modulate the intestinal immunity and that of the gut microbiota and to enhance the health status of piglets. That is why the current research is focused on the raw materials rich in phytochemicals which could positively modulate animal health. The composition analysis of fruit, vegetable and their by-products showed that identified phytochemicals could act as bioactive compounds, which can be used as modulators of weaning-induced disturbances in piglets. This review describes nutritional studies which investigated the effects of bioactive compounds derived from fruit (apple) and vegetables (carrot) or their by-products on the intestinal architecture and function, inflammatory processes and oxidative stress at the intestinal level. Data on the associated signaling pathways and on the microbiota modulation by bioactive compounds from these by-products are also presented.

Wood structure-inspired injectable lignin-based nanogels as blood-vessel-embolic sustained drug-releasing stent for interventional therapies on liver cancer

An embolic reagent with easy injection, well-controlled target embolization, and sustained release of chemotherapy drugs is urgently needed for successful trans-arterial chemo-embolization (TACE) treatment. However, the development of a highly effective embolic reagent is still challenged. Here, inspired and guided by the structural supporting properties and defense mechanisms of wood cell walls, an ideal lignin-based embolic nanogel (DOX-pN-KL) was explored. Based on the mechanical support of branched lignin and the π-π stacking force between the lignin aromatic ring with anti-tumor drug doxorubicin (DOX), DOX-pN-KL showed the highest mechanical strength among the reported thermosensitive embolization nanogel and performed high drug-loading and favorable sustained-release. Moreover, further TACE treatment and tumor microenvironment evaluation of VX2 tumor-bearing rabbits showed that this nanogel can completely block all levels of vessels in long term and continuously release DOX, thus having effective inhibition on tumor growth and metastasis. DOX-pN-KL is expected to be a promising alternative reagent for interventional therapy.

Involvement of branched RG-I pectin with hemicellulose in cell-cell adhesion of tomato during fruit softening

Cell adhesion of four cultivars of tomato fruit, "Micro Tom (MT)", "Heinz 1706 (H1706)", "Money Maker (MM)", "Ailsa Craig (AC)" were evaluated and cell walls were analyzed in order to assess the possible contribution of pectic and hemicellulosic polysaccharides to the softening and altered cell adhesion at two different stages of ripeness. Cell wall material (CWM) and solubilised fractions of green and red ripe fruit were analyzed by chemical, enzymatic techniques. In comparison with the four cultivars of tomato fruits, H1706 and MM are harder than MT and AC at both green and red ripe stage. The ripening-associated solubilisation of rhamnogalacturonan-riched pectic polysaccharides was reduced in H1706 and MM, and the content of side -chain sugars from RG-I reduced by more than 50% in MT and AC. In addition to recognized pectic modifying enzymes, RGase had a good effect on cell separation of H1706 and MM fruit at red ripe stage. The higher RG-I content and branching degree have been associated with increased cell adhesion and reduced cell wall porosity, thus maintained fruit firmness.

Soluble dietary fibres decrease α-glucosidase inhibition of epigallocatechin gallate through affecting polyphenol-enzyme binding interactions

The effects of soluble dietary fibres (SDFs) on α-glucosidase inhibition of EGCG were studied. Three arabinoxylans and polygalacturonic acid (PGA) significantly decreased inhibitory activity of EGCG against α-glucosidase, while two β-glucans hardly affected the inhibition. Although arabinoxylans and PGA weakened the competitive inhibition character of EGCG, they maintained the fluorescence quenching effect of EGCG. Then, arabinoxylans and PGA significantly decreased the particle size and turbidity of EGCG-enzyme complex. These results suggest that there formed SDFs-EGCG-enzyme ternary complexes. The stronger decreasing-effects of arabinoxylans and PGA on α-glucosidase inhibition of EGCG than β-glucans resulted from the stronger non-covalent interactions of arabinoxylans and PGA with EGCG. This is considered to arise from the short-branches of arabinoxylans that provided more opportunity for capturing EGCG, and from the strong polarity of PGA carboxyl that promoted hydrogen bondings with EGCG. Conclusively, SDFs should be considered as an impact factor when evaluating α-glucosidase inhibition of dietary polyphenols.

Ultrasonic-assisted enzymatic improvement of polyphenol content, antioxidant potential, and in vitro inhibitory effect on digestive enzymes of Miang extracts

The aims of this research were to optimize the ultrasonic-assisted enzymatic extraction of polyphenols under Miang and tannase treatment conditions for the improvement of antioxidant activity of Miang extracts via response surface methodology. Miang extracts treated with and without tannase were investigated for their inhibitory effects on digestive enzymes. The optimal conditions for ultrasonic-assisted enzymatic extraction of the highest total polyphenol (TP) (136.91 mg GAE/g dw) and total flavonoid (TF) (5.38 mg QE/g dw) contents were as follows: 1 U/g cellulase, 1 U/g xylanase, 1 U/g pectinase, temperature (74 °C), and time (45 min). The antioxidant activity of this extract was enhanced by the addition of tannase obtained from Sporidiobolus ruineniae A45.2 undergoing ultrasonic treatment and under optimal conditions (360 mU/g dw, 51 °C for 25 min). The ultrasonic-assisted enzymatic extraction selectively promoted the extraction of gallated catechins from Miang. Tannase treatment improved the ABTS and DPPH radical scavenging activities of untreated Miang extracts by 1.3 times. The treated Miang extracts possessed higher IC₅₀ values for porcine pancreatic α-amylase inhibitory activity than those that were untreated. However, it expressed approximately 3 times lower IC₅₀ values for porcine pancreatic lipase (PPL) inhibitory activity indicating a marked improvement in inhibitory activity. The molecular docking results support the contention that epigallocatechin, epicatechin, and catechin obtained via the biotransformation of the Miang extracts played a crucial role in the inhibitory activity of PPL. Overall, the tannase treated Miang extract could serve as a functional food and beneficial ingredient in medicinal products developed for obesity prevention.

Combination with litchi procyanidins under PEF treatment alters the physicochemical and processing properties of inulin

A novel alternative to prepare the inulin-procyanidin complex assisted by pulsed electric field (PEF) treatment was explored in this study. Results showed that the optimal condition of PEF treatment enhanced the adsorption rate of procyanidins to inulin from 78.56 to 103.46 μg/mg. Based on well fitted by Redlich-Peterson model and spectral analysis including UV and FT-IR, the interaction between inulin and procyanidin was evidenced to be dominated by hydrogen bonds. The DSC curve and the SEM spectrum displayed better stability of the PEF-treated inulin-procyanidin complex than the untreated complex. The PEF-treated complex had lower solubility but higher water-holding capacity than inulin, which exhibited stronger shear-thinning property and more stable flow behavior referring to rheological analysis. Furthermore, the gel formed from the PEF-treated complex possessed greater hardness, chewiness and viscosity, with no significant effects noted in terms of springiness, cohesiveness and resilience.

Application of Citrus and Apple Fibers for Formulation of Quercetin/Fiber Aggregates: Impact of Quercetin Concentration

Among flavonoids, quercetin has gained special attention due to its positive biological activities. Quercetin's disadvantages, such as its hydrophobic nature, poor solubility, and permeability, could be overcome by complexation with different polymers. Dietary fibers are known as carriers of polyphenols, which can protect them from environmental conditions and thus allow them to be absorbed. In this study, apple and citrus fibers (as applicable food by-products) were used as carriers of quercetin. A constant amount of fibers (1%) and different concentrations of quercetin solution (5 mM, 10 mM, and 20 mM) were complexed. Obtained fiber aggregates were subjected to HPLC to determine the quercetin concentration and antioxidant activity of aggregates (ABTS, DPPH, FRAP, and CUPRAC assays). IR spectra were recorded to confirm complexation of quercetin with selected fibers, and an additional DSC study was performed to evaluate the thermal stability of fiber aggregates. The results of HPLC analysis showed that quercetin had higher affinity towards apple fiber than citrus fiber, without proportional trends of adsorption. Consequently, apple fiber aggregates had higher antioxidant potential than citrus fiber aggregates. FTIR-ATR analysis showed the formation of new bands and the loss of existing bands when quercetin was present. Adsorption of quercetin also had an impact on the thermal stability of formulated fiber aggregates. For apple fiber, this impact was negative, while for citrus fiber, the impact was positive. These results could contribute to greater understanding of quercetin's behavior during the preparation of food additives based on polyphenols and fibers.

Hawthorn Juice Simulation System for Pectin and Polyphenol Adsorption Behavior: Kinetic Modeling Properties and Identification of the Interaction Mechanism

The interaction between polyphenols and polysaccharides plays an important role in increasing the turbidity stability of fruit juice and improving unpleasant sensory experiences. The binding adsorption behavior between hawthorn pectin (HP) and polyphenols (epicatechin and chlorogenic acid) accorded with the monolayer adsorption behavior driven by chemical action and were better fitted by pseudo-second order dynamic equation and Langmuir model. The HP binding sites (Qm) and adsorption capacity (Qe) to epicatechin were estimated at 75.188 and 293.627 μg/mg HP, respectively, which was about nine and twelve times higher than that of chlorogenic acid. The interaction between HP and polyphenols exhibited higher turbidity characteristics, particle size and lower zeta potential than epicatechin and chlorogenic acid alone. Meanwhile, according to Fourier Transform Infrared Spectroscopy (FT-IR) analysis, it could be speculated that the interaction between HP and polyphenols resulted in chemical combination. Moreover, ΔH < 0 and TΔS < 0, which indicated that the interaction between HP and polyphenols was mainly driven by hydrogen bonds and van der Waals forces.

Investigation on the rehydration mechanism of freeze-dried and hot-air dried shiitake mushrooms from pores and cell wall fibrous material

Shiitake mushrooms are unique in their porous structure, which could be affected by various chemical/physical changes during freeze-drying process. In this work, rehydration characteristics of freeze-dried products which were pre-frozen at -20 ℃, -40 ℃, -80 ℃, and -196 ℃ (by liquid nitrogen) were explored from aspects of pores and cell wall fibrous material. Although the appearance and rehydration rate of freeze-dried samples was better than hot-air dried samples with drying temperature ranging from 30 ℃ to 90 ℃, the final rehydration ratio was still less than hot-air dried samples dried at low temperature (30 ℃ and 40 ℃) due to the more serious structural damage by freeze-drying. Hydration capacity of the cell wall fiber was increased by freeze-drying, which might be ascribed to the loosen structure of cell wall instead of composition changes. Thus, hot-air drying at low temperature is still recommend and freeze-drying should be further optimized.

Molecular Dynamics Beyond the Monolayer Adsorption as Derived from Langmuir Curve Fitting

Langmuir adsorption model is a classic physical-chemical adsorption model and is widely used to describe the monolayer adsorption behavior at the material interface in environmental chemistry. Traditional adsorption dynamic modeling solely considered the surface physiochemical interaction between the adsorbent and adsorbate. The surface reaction dynamics resulting from the heterogeneous surface and intrinsic electronic structure of absorbents were rarely considered within the reported adsorption experiments. Herein, by employing the chlorine hybrid graphene oxide (GO-Cl) to adsorb Ag⁺ in an aqueous solution, complicated molecular dynamics significantly deviated from the monolayer adsorption mechanism, as suggested by Langmuir adsorption curve fitting, has been elucidated down to atomic scale. In the time-dependent Ag adsorption experiments, both Ag single atoms and Ag/AgCl nanoparticle heterostructures are observed to be formed sequentially on GO-Cl. These observations indicate that for the surface adsorption dynamics, not only the surface chemical adsorption process involved but also photoreduction and the C-Cl bond cleavage reaction has been heavily engaged within the GO-Cl interface, suggesting a much more complicated vision rather than the monolayered adsorption algorithm as derived from curve fitting. This study uses GO-Cl as a simple example to disclose the complicated adsorption dynamic process underneath Langmuir adsorption curve fitting. It advocates the necessity of imaging the interfacial atomic-scale dynamic structure with high-resolution microscopy techniques in modern adsorption studies, rather than simply explaining the adsorption dynamics relying on the curve fitting results due to the complicated physiochemical reactivity of the adsorbents.

Polyphenol-Polysaccharide Complex: Preparation, Characterization and Potential Utilization in Food and Health

Polysaccharides and polyphenols coexist in many plant-based food products. Polyphenol-polysaccharide interactions may affect the physicochemical, functional, and physiological properties, such as digestibility, bioavailability, and stability, of plant-based foods. In this review, the interactions (physically or covalently linked) between the selected polysaccharides and polyphenols are summarized. The preparation and structural characterization of the polyphenol-polysaccharide conjugates, their structural-interaction relationships, and the effects of the interactions on functional and physiological properties of the polyphenol and polysaccharide molecules are reviewed. Moreover, potential applications of polyphenol-polysaccharide conjugates are discussed. This review aids in a comprehensive understanding of the synthetic strategy, beneficial bioactivity, and potential application of polyphenol-polysaccharide complexes. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Recent advances in interactions between polyphenols and plant cell wall polysaccharides as studied using an adsorption technique

Polyphenols include flavonoids, phenolic acids, tannins and lignans which are known to have antioxidant, UV protection and antimicrobial properties. Among them the most commonly investigated are flavonoids and phenolic acids, which, due to their plant origin, may interact with the plant cell wall (PCW) components, specifically with its polysaccharides. Knowledge concerning the nature of the interactions between these components may be used in the production of functional food or in the development of food packaging materials with additional properties. The content of polyphenols in such products is responsible for their colour and taste, and may also act as a natural preservative. On the other hand, the PCW components may have protective role of polyphenols which has impact on their release in the human digestive system. Therefore, this review is an attempt to summarize the current state of knowledge that emerged after 2017 concerning the interaction of PCW components with polyphenols, with a particular focus on hemicellulose and pectin.

Relationship between anthocyanins, proanthocyanidins, and cell wall polysaccharides in grapes and red wines. A current state-of-art review

Numerous research studies have evaluated factors influencing the nature and levels of phenolics and polysaccharides in food matrices. However, in grape and wines most of these works have approach these classes of compounds individually. In recent years, the number of publications interconnecting classes have increased dramatically. The present review relates the last decade's findings on the relationship between phenolics and polysaccharides from grapes, throughout the entire winemaking process up to evaluating the impact of their relationship on the red wine sensory perception. The combination and interconnection of the most recent research studies, from single interactions in model wines to the investigation of the formation of complex macromolecules, brings the perfect story line to relate the relationship between phenolics and polysaccharides from the vineyard to the glass. Grape pectin is highly reactive toward grape and grape derived phenolics. Differences between grape cultivars or changes during grape ripeness will affect the extractability of these compounds into the wines. Therefore, the nature of the grape components will be crucial to understand the subsequent reactions occurring between phenolics and polysaccharide of the corresponding wines. It has been demonstrated that they can form very complex macromolecules which affect wine color, stability and sensory properties.

Effects of bamboo shoots (Phyllostachys edulis) dietary fibers prepared by different processes on the adsorption characteristics of polyphenols

In this work, adopting bamboo shoots as raw materials, three kinds of bamboo shoots dietary fibers were prepared by physical, chemical, and enzymatic methods, termed BSPDF, BSCDF, and BSEDF, respectively, and then investigating their adsorption characteristics for polyphenols through soaked them in different concentrations and different types of polyphenol solutions. The results of the adsorption kinetics showed that the adsorption amounts of polyphenols significantly increased during the initial 30 s of soaking, and the subsequent adsorption rate became slower and slower achieving adsorption kinetics after 2 hr. Moreover, their adsorption isotherms met well with the Langmuir model, but differences in saturated adsorption capacity and adsorption rate. More impressively, the maximum adsorption capacities Q_max of them to polyphenols followed the order of catechin > phlorizin dihydrate > chlorogenic acid > gallic acid. In addition, BSPDF, BSCDF and BSEDF all could adsorb a large amount of free catechin with the saturated adsorption capacity of 15.77, 14.69 and 16.76 mg/g, respectively and which exhibited blue and green characteristic fluorescence emission signals in the presence of catechin. Therefore, compared with the other two methods, the enzymatic hydrolysis method retains the spatial network structure of the fibrils, has a larger surface area and porosity, retains the original bound phenol of fibrils, with stronger physiological activity and more potential applications. PRACTICAL APPLICATIONS: Polyphenols are easy to oxidize in vitro, and are easily affected by gastric acid and various enzymes in vivo, which reduce their physiological activity. However, dietary fibers can resist the destruction of various enzymes and acids in the gastrointestinal tract. It is increasingly being realized that dietary fibers play a very important role in adsorbing polyphenols into its network structure, which can achieve the purpose of protecting polyphenols. In this contest, the bamboo shoots dietary fibers prepared by different methods had different adsorption characteristics for polyphenols. The aim of current study was to compare the saturated adsorption capacity of three kinds of dietary fibers to polyphenols, and screen suitable processing technology. We believed that our findings could be to provide basis for the development of new functional foods.

Systematic Review of Phenolic Compounds in Apple Fruits: Compositions, Distribution, Absorption, Metabolism, and Processing Stability

As the most widely consumed fruit in the world, apple (Malus domestica Borkh.) fruits provide a high level of phenolics and have many beneficial effects on human health. The composition and content of phenolic compounds in natural apples differs according to the tissue types and cultivar varieties. The bioavailability of apple-derived phenolics, depending on the absorption and metabolism of phenolics during digestion, is the key determinant of their positive biological effects. Meanwhile, various processing technologies affect the composition and content of phenolic compounds in apple products, further affecting the bioavailability of apple phenolics. This review summarizes current understanding on the compositions, distribution, absorption, and metabolism of phenolic compounds in apple and their stability when subjected to common technologies during processing. We intend to provide an updated overview on apple phenolics and also suggest some perspectives for future research of apple phenolics.

Interactions between cell wall polysaccharides and polyphenols: Effect of molecular internal structure

Cell wall polysaccharides (CPSs) and polyphenols are major constituents of the dietary fiber complex in plant-based foods. Their digestion (by gut microbiota) and bioefficacy depend not only on their structure and quantity, but also on their intermolecular interactions. The composition and structure of these compounds vary with their dietary source (i.e., fruit or vegetable of origin) and can be further modified by food processing. Various components and structures of CPSs and polyphenols have been observed to demonstrate common and characteristic behaviors during interactions. However, at a fundamental level, the mechanisms that ultimately drive these interactions are still not fully understood. This review summarizes the current state of knowledge on the internal factors that influence CPS-polyphenol interactions, describes the different ways in which these interactions can be mediated by molecular composition or structure, and introduces the main methods for the analysis of these interactions, as well as the mechanisms involved. Furthermore, a comprehensive overview is provided of recent key findings in the area of CPS-polyphenol interactions. It is becoming clear that these interactions are shaped by a multitude of factors, the most important of which are the physicochemical properties of the partners: their morphology (surface area and porosity/pore shape), chemical composition (sugar ratio, solubility, and non-sugar components), and molecular architecture (molecular weight, degree of esterification, functional groups, and conformation). An improved understanding of the molecular mechanisms that drive interactions between CPSs and polyphenols may allow us to better establish a bridge between food processing and the bioavailability of colonic fermentation products from CPSs and antioxidant polyphenols, which could ultimately lead to the development of new guidelines for the design of healthier and more nutritious foods.

Adsorption between Quercetin Derivatives and β-Glucan Studied with a Novel Approach to Modeling Adsorption Isotherms

Interactions between polyphenols and fibers are important for polyphenol bioactivities, and have been studied in vitro with adsorption process and isotherms. However, the theoretical interpretations of adsorption potentially can be affected by the method of isotherm modeling. The aim was to study the interactions between β-glucan and quercetin derivatives (quercetin-3-glucoside, quercetin-3-galactoside, quercetin-3-rhamnoside) by studying adsorption, and to potentially improve the modeling of adsorption isotherms. Quercetin derivatives were determined by using spectrophotometric method. Experimental results were modeled with Langmuir, Dubinin-Radushkevich, and Hill isotherms using non-linear regression, linear regression, and improved non-linear regression. For improved non-linear regression, code in the R programming language was developed. All quercetin derivatives adsorbed onto the surface of β-glucan. Improved non-linear regression gave somewhat lower errors and may be the most appropriate for adsorption interpretation. According to isotherms obtained with improved regression, it may be suggested that adsorption is higher for rhamnoside and glucoside of quercetin than for quercetin-3-galactoside which agrees with experimental results. Adsorption could be a physical process. The spatial arrangement of hydroxyl (OH) groups on the glycoside part of quercetin could affect the adsorption. In conclusion, a novel approach using improved non-linear regression has been shown to be a useful, novel tool for adsorption interpretation.

Magnetic metal organic framework for pre-concentration of ampicillin from cow milk samples

The aim of this study is a present of a simple solvothermal synthesis approach to preparation of Cu-based magnetic metal organic framework (MMOF) and subsequently its application as sorbent for ultrasound assisted magnetic solid phase extraction (UAMSPE) of ampicillin (AMP) from cow milk samples prior to high performance liquid chromatography-Ultraviolet (HPLC-UV) determination. Characteristics of prepared MMOF were fully investigated by different techniques which showed the exclusive properties of proposed sorbent in terms of proper functionality, desirable magnetic property and also high specific surface area. Different influential factors on extraction recovery including sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume were assessed using central composite design (CCD) based response surface methodology (RSM) as an operative and powerful optimization tool. This is the first report for determination of AMP using MMOF. The proposed method addressed some drawbacks of other methods and sorbents for determination of AMP. The presented method decreases the extraction time (4 min) and also enhances adsorption capacity (250 mg/g). Moreover, the magnetic property of presented sorbent (15 emu/g) accelerates the extraction process which does not need filtration, centrifuge and precipitation procedures. Under the optimized conditions, the proposed method is applicable for linear range of 1.0–5000.0 μg/L with detection limit of 0.29 μg/L, satisfactory recoveries (≥95.0%) and acceptable repeatability (RSD less than 4.0%). The present study indicates highly promising perspectives of MMOF for highly effective analysis of AMP in complicated matrices.

•

MMOF was prepared and used for the first time for determination of ampicillin from cow milk samples.

•

The extraction method was convenient, rapid and the MMOF can be used more than 8 times.

•

The MMOF have high specific surface area (300.0 m²/g) and high adsorption capacity (250.5 mg g⁻¹).

•

The separation time was only 5 min, which was much shorter than other reported.

In Vitro Digestion of Apple Tissue Using a Dynamic Stomach Model: Grinding and Crushing Effects on Polyphenol Bioaccessibility

Food structure is a key determinant for the release of phenolic compounds during gastric and intestinal digestion. We evaluated the bioaccessibility of polyphenols from apple tissue during gastric digestion in vitro from bio-mechanical perspectives including the effects of gastric juice and mucin on the apple tissue matrix under simulated stomach peristalsis. The gastric model system was effective in releasing polyphenols because of simultaneous compression and extrusion, with 3 times higher release from coarse than from fine particles. However, bioaccessibility of polyphenols was reduced up to 44% in the presence of both cell walls and gastric mucin. Most individual phenolic molecules were gradually released and were stable in the gastric environment, except for procyanidin B2. The study suggests that the bioaccessibility of polyphenols from apples in the upper digestive tract is dependent on mechanical disintegration and the residual matrix present in the swallowed bolus.