Effect of flaxseed polyphenols on physical stability and oxidative stability of flaxseed oil-in-water nanoemulsions

Flaxseed polyphenols: Effects of varieties on its composition and antioxidant capacity

This study identified phenolic compounds in five flaxseed varieties and evaluated their antioxidant activities. Results showed significant variations in phenolic acids and flavonoids among the varieties. Longya 16 had the lowest flavonoid content, Longya 13 had the lowest phenolic acid content, while Longya 10 exhibited the highest content and diversity of polyphenols, including six flavonoids (vitexin, quercitrin, quercetin, apigenin, kaempfero1, (+)-dihydroquercetin) and five phenolic acids (gallic acid, vanillic acid, ferulic acid, sinapic acid, and 4-hydroxybenzoic acid). Antioxidant activity was assessed using DPPH and ABTS radical scavenging assays, and cell-based assays under tBHP-induced oxidative stress. Flaxseed polyphenol extracts significantly reduced ROS, MDA, and GSSG levels and increased SOD and CAT activities, preserving cell vitality and morphology. These findings confirmed the significant antioxidant activity of flaxseed polyphenols, providing a theoretical basis for their application in antioxidative functional areas.

Effect of heat-treated flaxseed lignan macromolecules on the interfacial properties and physicochemical stability of α-linolenic acid-enriched O/W emulsions

Flaxseed lignan macromolecules (FLMs) are important polyphenols present in flaxseeds with interfacial adsorption behavior. However, FLMs are easily degraded during thermal treatment in emulsions, which further influences their interfacial properties and application. In this work, the interfacial properties of FLMs between oil and water were evaluated using compression isotherms and interfacial tension to investigate the regulation mechanism of FLMs and their heat-treated products on the stability of O/W emulsions. Furthermore, the improvement mechanism of FLM heat-treated products on the physicochemical stability of flaxseed oil emulsions was clarified. Studies showed that thermal degradation occurred on terminal phenolic acids in FLMs when treated under 100 and 150 °C (FLM-100 and FLM-150) without any decrease in antioxidant activity. FLM-100 and FLM-150 improved the physicochemical stability of sunflower lecithin (S90)-stabilized flaxseed oil emulsions and reduced the concentration of hydroperoxides and TBARS by 26.7% and 80% (p < 0.05), respectively, during storage. This was due to the high interfacial anchoring of FLM-100 and FLM-150, which further strengthened the interface of oil droplets and improved the interfacial antioxidant effect of FLMs. This implies that FLM-100 and FLM-150 could act as new efficient antioxidants for application in food emulsions.

Hyaluronic acid-poly(glyceryl)10-stearate nanoemulsion for co-delivery of fish oil and resveratrol: Enhancing bioaccessibility and antioxidant potency

Hyaluronic acid (HA), an endogenous polysaccharide comprising alternating D-glucuronic acid and N-acetylglucosamine units, is renowned for its high hydrophilicity, biocompatibility, and biodegradability. These attributes have rendered HA invaluable across medical and drug delivery fields. HA can be altered through physical, chemical, or enzymatic methods to improve the properties of the modified substances. In this work, we synthesized a derivative via the esterification of HA with poly(glyceryl)10-stearate (PG10-C18), designated as HA-PG10-C18. This novel derivative was employed to fabricate a nano co-delivery system (HA-PG10-C18@Res-NE) for fish oil and resveratrol (Res), aiming to enhance their stability and bioaccessibility. An exhaustive investigation of HA-PG10-C18@Res-NE revealed that the HA-modified system displayed superior physicochemical stability, notably in withstanding oxidation and neutralizing free radicals. Moreover, in vitro simulated digestion underscored the system's enhanced bioaccessibility of Res and more efficient release of free fatty acids. These outcomes underscore the strategic advantage of HA in modifying PG10-C18 for nanoemulsion formulation. Consequently, HA-PG10-C18 stands as a promising emulsifier for encapsulating lipophilic bioactives in functional foods, nutraceuticals, and pharmaceuticals.

Effect of Pretreatments on the Chemical, Bioactive and Physicochemical Properties of Cinnamomum camphora Seed Kernel Extracts

Cinnamomum camphora seed kernels (CCSKs) are rich in phytochemicals, especially plant extracts. Phytochemicals play a vital role in therapy due to their strong antioxidant and anti-inflammatory activities. Extracts from CCSK can be obtained through multiple steps, including pretreatment, extraction and purification, and the purpose of pretreatment is to separate the oil from other substances in CCSKs. However, C. camphora seed kernel extracts (CKEs) were usually considered as by-products and discarded, and their potential bioactive values were underestimated. Additionally, little has been known about the effect of pretreatment on CKE. This study aimed to investigate the effects of pretreatment methods (including the solvent extraction method, cold pressing method, aqueous extraction method and sub-critical fluid extraction method) on the extraction yields, phytochemical profiles, volatile compounds and antioxidant capacities of different CKE samples. The results showed that the CKE samples were rich in phenolic compounds (15.28-20.29%) and alkaloids (24.44-27.41%). The extraction yield, bioactive substances content and in vitro antioxidant capacity of CKE pretreated by the sub-critical fluid extraction method (CKE-SCFE) were better than CKEs obtained by other methods. CKE pretreated by the solvent extraction method (CKE-SE) showed the best lipid emulsion protective capacity. Moreover, the volatile substances composition of the CKE samples was greatly influenced by the pretreatment method. The results provided a fundamental basis for evaluating the quality and nutritional value of CKE and increasing the economic value of by-products derived from CCSK.

Nutritional composition, lipid profile and stability, antioxidant activities and sensory evaluation of pasta enriched by linseed flour and linseed oil

Pasta assortments fortified with high quality foods are a modern nutritional trends. This study, explored the effects of fortification with linseed flour (LF) and linseed oil (LO) on durum wheat pasta characteristics. Wheat flour semolina was replaced with 5%, 10% and 15% of LF or 1%, 2.5% and 5% of LO. Control pasta CP (without LF or LO addition), LF-enriched pasta LFP 5%, LFP 10% and LFP 15% and LO-enriched pasta LOP 1%, LOP 2.5% and LOP 5% was compared for the proteins, fat and phenolic contents and fatty acids (FA) profile. Impact on lipid oxidation and sensory evaluation were also determined. Fortification of pasta with LF improved significantly (p < 0.05) the contents of protein, fat and phenolic compared to CP whereas the enrichment of pasta with LO resulted in a significant increase (p < 0.05) in the content of fat and a significant decrease in protein and phenolic contents. All the formulations decreased the saturated FA percent and increased the polyunsaturated FA percent with enhancement of omega-3 FA content. Antioxidant activity measured by FRAP and DPPH assays was improved after the fortification. For lipid oxidation, the replacement of semolina by LF or LO promoted an increase (p < 0.05) on TBARS values in level-dependent manner. Regarding sensory evaluation, the two types of fortification did not affect the taste; flavor and aroma of cooked pasta, but LOP 5% showed the highest score of the overall acceptability. The results recommended the possibility of producing pasta supplemented with LF or LO (even at a level of 15% and 5% respectively) as a functional food.

Encapsulation of Black Rice Bran Extract in a Stable Nanoemulsion: Effects of Thermal Treatment, Storage Conditions, and In Vitro Digestion

This study aimed to improve the dispersibility of phenolic compounds from black rice bran through the encapsulation process within nanoemulsion. The study focused on assessing the stability of the nanoemulsions, which were prepared using a combination of surfactants with distinct hydrophilic-lipophilic balance (HLB) values and sunflower oil under different thermal treatments and storage conditions. The study revealed a significant correlation between the mixed surfactant HLB value and the nanoemulsions properties, including average particle size, polydispersity index (PDI), and ζ-potential. Specifically, an increase in the HLB value was associated with a decrease in the initial average particle size. The encapsulated polyphenols exhibited remarkable stability over a storage period of up to 30 days at different temperatures with no significant changes observed in particle size or PDI. The study also investigated the impact of different ionic strengths (0.2, 0.5, and 1.00 mol L-1 NaCl) on the physical stability and antioxidant black rice bran extract nanoemulsion, and the results revealed that adding NaCl influenced the particle size and surface charge of the nanoemulsions. Total phenolic content and DPPH results demonstrated a significant impact of salt concentration on antioxidant properties, with varying trends observed among the HLB formulations. Furthermore, the behavior of the encapsulated extracts during digestion was examined, and their antioxidant activity was evaluated.

Aroma characteristics of flaxseed milk via GC-MS-O and odor activity value calculation: Imparts and selection of different flaxseed varieties

Currently, the effect of varieties on the flavor and stability of flaxseed milk remains unknown. Therefore, this study was conducted to investigate the effects of different varieties on the stability, sensory, and aromas of flaxseed milk. 51 volatile compounds were identified in flaxseed milk using Stir Bar Sorptive Extraction-Gas Chromatography-Olfactometry-Mass Spectrometry (SBSE-GC-O-MS). Among them, 1-octen-3-ol, 2-methoxy-4-vinylphenol, and 2,3,5-trimethylpyrazine contributed higher relative odor active values (ROAV), resulted in the fruity, roasted, sweet, and cucumber in flaxseed milk. Isovaleraldehyde (green notes) was not detected in XHZM. However, other compounds such as 1-nonanol (floral), γ-nonanolactone and γ-octanoic lactone (coconut milk) had higher concentrations, causing a better sensory evaluation. Additionally, its stability was relatively good. The orthogonal partial least-squares regression (OPLS) model and VIP values showed that eight compounds were responsible for the sensory differences from different varietals. The study provided references to selection and understanding flavor composition basis of flaxseed milk.

Encapsulated nanopesticides application in plant protection: Quo vadis?

The increased global food insecurity due to the growing population can be addressed with precision and sustainable agricultural practices. To tackle the issues regarding food insecurity, farmers used different agrochemicals that improved plant growth and protection. Among these agrochemicals, synthetic pesticides used for plant protection in the agricultural field have various disadvantages. Conventional applications of synthetic pesticides have drawbacks such as rapid degradation, poor solubility, and non-target effects, as well as increased pesticide runoff that pollutes the environment. Nanotechnology has evolved as a potential solution to increase agricultural productivity through the development of different nanoforms of agrochemicals such as nanopesticides, nano-fabricated fertilizers, nanocapsules, nanospheres, nanogels, nanofibers, nanomicelles, and nano-based growth promoters. Encapsulation of these pesticides inside the nanomaterials has provided good biocompatibility over conventional application by inhibiting the early degradation of active ingredients (AI), increasing the uptake and adhesion of pesticides, improving the stability, solubility, and permeability of the pesticides, and decreasing the environmental impacts due to the pesticide runoff. In this review, different nanoforms of encapsulated pesticides and their smart delivery systems; nanocarriers in RNA interference (RNAi) based pesticides; environmental fate, practical implications, management of nanopesticides; and future perspectives are discussed.

Effect of Different Temperatures on the Storage Stability of Flaxseed Milk

In this study, the physical and oxidative stability of flaxseed milk without food additives at different temperatures (25 °C and 37 °C) was assessed. Over in 206 days in storage, the particle size, Turbiscan stability index (TSI), centrifugal sedimentation rate, and primary and secondary oxidation products of flaxseed milk increased, viscosity decreased, and the absolute value of the potential first decreased and then increased. These phenomena indicated a gradual decrease in the physical stability of flaxseed milk, accompanied by drastic oxidative changes. The antioxidant capacity of flaxseed milk was related to the location of the physical distribution of flaxseed lignin, which was more effective in the aqueous phase compared to the non-aqueous phase. Interestingly, after 171 days in storage at 37 °C, the particle size of flaxseed milk was approximately doubled (6.98 μm → 15.27 μm) and the absolute value of the potential reached its lowest point (-13.49 mV), when the content of primary oxidation products reached its maximum (8.29 mmol/kg oil). The results showed that temperature had a significant effect on the stability of flaxseed milk and that stability decreased with increasing temperature and shortened shelf life. This work provides a theoretical basis for elucidating the stabilization-destabilization mechanism of flaxseed milk.

Duration of the Flaxseed Supplementation Affects Antioxidant Defence Mechanisms and the Oxidative Stress of Fattening Pigs

This study was conducted to investigate the effect of the duration of a flaxseed diet on fattening pigs' antioxidant defence mechanism in blood and tissues. Eighteen 20-week-old Landrace breed fattening pigs (BW 76.61 ± 2.30 kg) were divided into three groups of six animals. The control group was fed a basal diet. The FS3 group was fed the basal diet supplemented with 10% flaxseed for 3 weeks. The FS6 group received the same basal diet with flaxseed for 6 weeks. The total antioxidant capacity of the blood, measured as the total antioxidant status (TAS), total plasma antioxidant capacity (FRAP), reactive oxygen metabolites (dROMs) and total antioxidant capacity (PAT), was not affected by the flaxseed diet. The superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx) and glutathione reductase (GR) activities were significantly decreased in the FS3 pigs in the heart (p < 0.05). However, in the FS3 group, the glutathione-S-transferase (GST) activity significantly increased compared to the control, but in the FS6 group, the activity was inhibited (p < 0.05). In the muscle, the CAT and GST activity was significantly decreased in the FS3 group (p < 0.05). The thiobarbituric acid reactive substance (TBARS) content was significantly reduced in the brain, muscle and heart in the FS3 group(p < 0.05). In FS6, the TBARS content significantly increased in the heart and brain (p < 0.05). Our results showed that the health effect of a flaxseed diet is significantly conditioned by the length of the flaxseed addition.

Identification of the Microbial Transformation Products of Secoisolariciresinol Using an Untargeted Metabolomics Approach and Evaluation of the Osteogenic Activities of the Metabolites

Secoisolariciresinol (SECO) is one of the major lignans occurring in various grains, seeds, fruits, and vegetables. The gut microbiota plays an important role in the biotransformation of dietary lignans into enterolignans, which might exhibit more potent bioactivities than the precursor lignans. This study aimed to identify, synthesize, and evaluate the microbial metabolites of SECO and to develop efficient lead compounds from the metabolites for the treatment of osteoporosis. SECO was fermented with human gut microbiota in anaerobic or micro-aerobic environments at different time points. Samples derived from microbial transformation were analyzed using an untargeted metabolomics approach for metabolite identification. Nine metabolites were identified and synthesized. Their effects on cell viability, osteoblastic differentiation, and gene expression were examined. The results showed that five of the microbial metabolites exerted potential osteogenic effects similar to those of SECO or better. The results suggested that the enterolignans might account for the osteoporotic effects of SECO in vivo. Thus, the presence of the gut microbiota could offer a good way to form diverse enterolignans with bone-protective effects. The current study improves our understanding of the microbial transformation products of SECO and provides new approaches for new candidate identification in the treatment of osteoporosis.

Functional stirred yogurt manufactured using co-microencapsulated or free forms of grape pomace and flaxseed oil as bioactive ingredients: Physicochemical, antioxidant, rheological, microstructural, and sensory properties

Functional stirred yogurt samples were manufactured with combinations of grape pomace (GP) and flaxseed oil (FO) in microencapsulated or free forms (2% w/w) and quality characteristics of yogurts were investigated during 21 days of storage. The incorporation of GP and FO in microencapsulated or free forms caused a significant decrease in pH, syneresis, and a significant increase in acidity, water holding capacity, and viscosity of stirred yogurt (p < .05). While stirred yogurt containing GP and FO in free form had the highest loss modulus (G″), all yogurt samples represented solid-like behavior. Stirred yogurts containing the microencapsulated form of GP and FO showed the highest amount of phenolics and antioxidant activity compared with the two other yogurt samples (p < .05). More compact structure and higher gel strength were observed in stirred yogurts formulated with the microencapsulated or free form of GP and FO, compared to the control yogurt sample. The overall sensory acceptability of stirred yogurt manufactured using the encapsulated form of GP and FO was not significantly different from the control yogurt sample (p > .05). In conclusion of this competitive study, GP and FO as bioactive compounds could be used in the microencapsulated form in order to develop functional stirred yogurt with specific quality characteristics.

Changes in flax yield and quality in response to various mineral nutrition

The researchers of Russian State Agrarian University, Moscow Timiryazev Agricultural Academy in 2013-2016 conducted a long-term stationary experiment to study chemical and toxicological properties of fiber flax, Voskhod variety, growing on sod-podzolic soil in the soil and climate of the Moscow region. Test plots were selected with following crop rotation options: without fertilizers, without liming; without fertilizers, with liming; N100P150K120 (kg a.i./ha), without liming; N100P150K120, with liming; N100P150K120 + manure 20 t/ha, without liming; N100P150K120 + manure 20 t/ha, with liming. The agro-climatic conditions of the growing seasons during the research years did not have a negative impact on the growth and development of fiber flax, the hydro-thermal index was 1.1 in 2013, -1.05 in 2014, 1.5 in 2015, and 1.5 in 2016. The maintained crop rotation and the introduction of a full range of mineral and organic fertilizers has been found to contribute to high yields of flax in terms of fiber (18.5-18.9 hwt/ha) and seeds (7.9-8.3 hwt/ha). The seeds contain 16.9-19.5% protein and 33.5-39.4% lipids. The yield of flaxseed oil from seeds ranged from 19.5-35.7% on average for different variants of the experiment. The peroxide number index was 2.5-1.5 mg-eq O2/kg, the acid number index was 1.1-1.9 mg KOH/g, which corresponds to obtaining high-quality linseed oil in compliance with quality standards for all variants of the experiment.

Antioxidant properties of lipid concomitants in edible oils: A review

Edible oils are indispensable for human life, providing energy and necessary fatty acids. Nevertheless, they are vulnerable to oxidation via a number of different mechanisms. Essential nutrients deteriorate as well as toxic substances are produced when edible oils are oxidized; thus, they should be retarded wherever possible. Lipid concomitants have a strong antioxidant capacity and are a large class of biologically active chemical substances in edible oils. They have shown remarkable antioxidant properties and were documented to improve the quality of edible oils in varied ways. An overview of the antioxidant properties of the polar, non-polar, and amphiphilic lipid concomitants present in edible oils is provided in this review. Interactions among various lipid concomitants and the probable mechanisms are also elucidated. This review may provide a theoretical basis and practical reference for food industry practitioners and researchers to understand the underlying cause of variations in the quality of edible oils.

Nanoemulsion containing Yellow Monascus pigment : Fabrication, characterization, storage stability, and lipase hydrolytic activity in vitro digestion

The natural pigment of monascus is favored by human for its special coloring and physiological activity, and its development and application have attracted much attention. In this study, a novel corn oil-based nanoemulsion encapsulated with Yellow Monascus Pigment crude extract (CO-YMPN) was successfully prepared via the phase inversion composition method. The fabrication and stable conditions of the CO-YMPN including Yellow Monascus pigment crude extract (YMPCE) concentration, emulsifier ratio, pH, temperature, ionic strength, monochromatic light and storage time were investigated systemically. The optimized fabrication conditions were the emulsifier ratio (5:3 ratio of Tween 60 to Tween 80) and the YMPCE concentration (20.00% wt%)). Additionally, the DPPH radical scavenging capability of the CO-YMPN (19.47 ± 0.52%) was more excellent than each YMPCE or corn oil. Moreover, the kinetic analysis results based on Michaelis-Menten equation and constant revealed that CO-YMPN could improve lipase hydrolysis capacity. Therefore, the CO-YMPN complex had excellent storage stability and water solubility in the final water system, and the YMPCE showed brilliant stability.

Improvement of Oxidative Stability of Fish Oil-in-Water Emulsions through Partitioning of Sesamol at the Interface

The susceptibility of polyunsaturated fatty acids to oxidation severely limits their application in functional emulsified foods. In this study, the effect of sesamol concentration on the physicochemical properties of WPI-stabilized fish oil emulsions was investigated, focusing on the relationship between sesamol-WPI interactions and interfacial behavior. The results relating to particle size, zeta-potential, microstructure, and appearance showed that 0.09% (w/v) sesamol promoted the formation of small oil droplets and inhibited oil droplet aggregation. Furthermore, the addition of sesamol significantly reduced the formation of hydrogen peroxide, generation of secondary reaction products during storage, and degree of protein oxidation in the emulsions. Molecular docking and isothermal titration calorimetry showed that the interaction between sesamol and β-LG was mainly mediated by hydrogen bonds and hydrophobic interactions. Our results show that sesamol binds to interfacial proteins mainly through hydrogen bonding, and increasing the interfacial sesamol content reduces the interfacial tension and improves the physical and oxidative stability of the emulsion.

Stability of protein particle based Pickering emulsions in various environments: review on strategies to inhibit coalescence and oxidation

The emerging research interests in fabrication of protein particles as soft-particle emulsifiers show the prospective potential of using protein particles in novel poly-phase dispersing food systems. This review first provides a comprehensive summary and analysis on the dominant role of key physicochemical properties of protein particles including wettability, morphology, surface charge and protein concentration on their emulsifying abilities to construct Pickering emulsions. It was found that the constructed emulsions showed high sensitivity to changes in pH, ionic strength and temperature (thermal and freeze-thaw treatment). Moreover, oxidation remains as a challenge for protein particle based Pickering emulsions during prolonged storage, reducing their acceptance in food products. Current strategies for improving the stability of these emulsions to variable aqueous conditions and variable temperatures, and restricting oxidation event are summarized. In summary, an "ideal" protein particle-based Pickering emulsion system is proposed, encompassing aspects of interfacial property, emulsion network and texture, and antioxidant enrichment, thus promoting industrial translation into novel food and nutraceutical products.

A review of the structure, function, and application of plant-based protein-phenolic conjugates and complexes

Interactions between plant-based proteins (PP) and phenolic compounds (PC) occur naturally in many food products. Recently, special attention has been paid to the fabrication of PP-PC conjugates or complexes in model systems with a focus on their effects on their structure, functionality, and health benefits. Conjugates are held together by covalent bonds, whereas complexes are held together by noncovalent ones. This review highlights the nature of protein-phenolic interactions involving PP. The interactions of these PC with the PP in model systems are discussed, as well as their impact on the structural, functional, and health-promoting properties of PP. The PP in conjugates and complexes tend to be more unfolded than in their native state, which often improves their functional attributes. PP-PC conjugates and complexes often exhibit improved in vitro digestibility, antioxidant activity, and potential allergy-reducing activities. Consequently, they may be used as antioxidant emulsifiers, edible film additives, nanoparticles, and hydrogels in the food industry. However, studies focusing on the application of PP-PC conjugates and complexes in real foods are still scarce. Further research is therefore required to determine the structure-function relationships of PP-PC conjugates and complexes that may influence their application as functional ingredients in the food industry.

Antioxidant activity and interactions between whey protein and polysaccharides from different parts of Houttuynia cordata

Houttuynia cordata polysaccharides (PSY) are known to exhibit a variety of beneficial activities, but these are currently not specifically utilized in food. Hence, using the two edible parts of Houttuynia cordata, a herbaceous plant native to Southeast Asia, this study developed polysaccharides of a stem (HCPS)-whey protein concentrate (WPC) complex and a leaf (HCPL)-WPC complex, and studied their stability, structure and antioxidant activity. The results showed that stability differed in complexes with different proportions, exhibiting only relative stability in the two complexes in which the ratio of HCPS-WPC and HCPL-WPC was 1:4, but increased stability in the HCPL-WPC complex (ζ-potential of HCPL-WPC: | -21.87 mv| >ζ-potential of HCPS-WPC: | -21.70 mv|). Structural characterization showed that there was electrostatic interaction between HCPS and WPC and between HCPL and WPC. The HCPL-WPC was found to have better antioxidant activity. The findings of this study, thus, provide a reference for the development of Houttuynia cordata polysaccharide applications in food.

Composition, processing, and quality control of whole flaxseed products used to fortify foods

Whole flaxseed (flour) as a good source of omega-3 fatty acid and phytochemicals with excellent nutritional and functional attributes has been used to enrich foods for health promotion and disease prevention. However, several limitations and contemporary challenges still impact the development of whole flaxseed (flour)-enriched products on the global market, such as naturally occurring antinutritional factors and entrapment of nutrients within food matrix. Whole flaxseed (flour) with different existing forms could variably alter the techno-functional performance of food matrix, and ultimately affect the edible qualities of fortified food products. The potential interaction mechanism between the subject and object components in fortified products has not been elucidated yet. Hence, in this paper, the physical structure and component changes of flaxseed (flour) by pretreatments coupled with their potential influences on the edible qualities of multiple fortified food products were summarized and analyzed. In addition, several typical food products, including baked, noodle, and dairy products were preferentially selected to investigate the potential influencing mechanisms of flaxseed (flour) on different substrate components. In particular, the altered balance between water absorption of flaxseed protein/gum polysaccharides and the interruption of gluten network, lipid lubrication, lipid-amylose complexes, syneresis, and so forth, were thoroughly elucidated. The overall impact of incorporating whole flaxseed (flour) on the quality and nutritional attributes of fortified food products, coupled with the possible solutions against negative influences are aimed. This paper could provide useful information for expanding the application of whole flaxseed (flour) based on the optimal edible and nutritional properties of fortified food products.

Review on the Antioxidant Activity of Phenolics in o/w Emulsions along with the Impact of a Few Important Factors on Their Interfacial Behaviour

This review paper focuses on the antioxidant properties of phenolic compounds in oil in water (o/w) emulsion systems. The authors first provide an overview of the most recent studies on the activity of common, naturally occurring phenolic compounds against the oxidative deterioration of o/w emulsions. A screening of the latest literature was subsequently performed with the aim to elucidate how specific parameters (polarity, pH, emulsifiers, and synergistic action) affect the phenolic interfacial distribution, which in turn determines their antioxidant potential in food emulsion systems. An understanding of the interfacial activity of phenolic antioxidants could be of interest to food scientists working on the development of novel food products enriched with functional ingredients. It would also provide further insight to health scientists exploring the potentially beneficial properties of phenolic antioxidants against the oxidative damage of amphiphilic biological membranes (which link to serious pathologic conditions).

Fabrication of Antioxidant Pickering Emulsion Based on Resveratrol-Grafted Zein Conjugates: Enhancing the Physical and Oxidative Stability

Lipid oxidation is still a major problem complicating the development of food emulsions. In this study, an antioxidant Pickering emulsion stabilized by resveratrol-grafted zein (Z-R) conjugates and pectin (P) complex particles was prepared. The hydrophilic pectin successfully adjusted the wettability of Z-R; when the mass ratio of Z-R to P was 2:1 (Z-R/P_2:1), the three-phase contact angle was 90.68°, and the wettability of the particles was close to neutral. Rheological analysis showed that the emulsion formed an elastic gel structure. FTIR spectra indicated that there was a hydrogen bond and electrostatic interaction between Z-R and P. The disappearance of characteristic infrared peaks of corn oil was due to a dense protective film formed on the surface of oil drops by Z-R/P_2:1 particles, which was confirmed by confocal laser scanning microscopy. The emulsion stabilized by Z-R/P_2:1 had excellent physical stability at a wide range of pH values (4-9), salt ion concentrations (0.04-0.15 mol·L^-1) and storage times (0-30 days). The anti-lipid oxidation ability of the emulsion was outstanding; after storage for 14 days at room temperature, the MDA content in the emulsion was only 123.85 μmol/kg oil. In conclusion, the Z-R/P_2:1 particles prepared in this study can effectively stabilize a Pickering emulsion and expand the usability of the method for constructing antioxidant Pickering emulsions.

Structural Characterization and Biological Activity of Polysaccharides from Stems of Houttuynia cordata

In this study, water-soluble natural polysaccharides were extracted from the stems of Houttuynia cordata Thunb (HCPS). The optimization of the hot water extraction process using response surface methodology (RSM), and the extraction factors, were analyzed by multiple stepwise regression analysis and Pearson analysis. Then, the structural characterization and biological activity of the HCPS were investigated. The results indicated that the maximum extraction yield (2.43%) of the HCPS was obtained at the optimal condition (extraction temperature for 90 °C, extraction time for 5 h, solid-liquid ratio for 1:30 g/mL). The extraction temperature was determined to be the primary factor influencing the extraction yield. The HCPS molecules had an average molecular weight of 8.854 × 103 kDa and were primarily of mannose (Man), rhamnose (Rha), glucuronic acid (GlcA), galacturonic acid (GalA), glucose (Glc), and xylose (Xyl). In addition, the backbone of the HCPS might consist of →6)-α-d-Glcp-(1→ and →6)-β-d-GalpA-(1→. The HCPS had no triple-helix structure. The scanning electron microscopy (SEM) results showed that the HCPS presented a smooth and uniform appearance, and some sheet and chain structures existed. Moreover, the HCPS exhibited significant anti-oxidant activity and inhibited the activity of α-amylase and α-glucosidase. These findings showed that HCPS might be developed into a potential material for hypoglycemia, and provides a reference for the development of Houttuynia cordata polysaccharide applications in food.

Fabrication and Characterization of Botanical-Based Double-Layered Emulsion: Protection of DHA and Astaxanthin Based on Interface Remodeling

Both DHA and astaxanthin, with multiple conjugated double bonds, are considered as health-promoting molecules. However, their utilizations into food systems are restricted due to their poor water solubility and high oxidizability, plus their certain off-smell. In this study, the interactions between perilla protein isolate (PPI) and flaxseed gum (FG) were firstly investigated using multiple spectroscopies, suggesting that hydrophobic, electrostatic force and hydrogen bonds played important roles. Additionally, double-layer emulsion was constructed by layer-by-layer deposition technology and exhibited preferable effects on masking the fishy smell of algae oil. Calcium ions also showed an improving effect on the elasticity modulus of O/W emulsions and was managed to significantly protect the stability of co-delivered astaxanthin and DHA, without additional antioxidants during storage for 21 days. The vegan system produced in this study may, therefore, be suitable for effective delivery of both ω-3 fatty acid and carotenoids for their further incorporation into food systems, such as plant-based yoghourt, etc.

An Efficient Deacidification Process for Safflower Seed Oil with High Nutritional Property through Optimized Ultrasonic-Assisted Technology

Safflower seed oil (SSO) is considered to be an excellent edible oil since it contains abundant essential unsaturated fatty acids and lipid concomitants. However, the traditional alkali-refined deacidification process of SSO results in a serious loss of bioactive components of the oil and also yields massive amounts of wastewater. In this study, SSO was first extracted by ultrasonic-assisted ethanol extraction (UAEE), and the extraction process was optimized using random centroid optimization. By exploring the effects of ethanol concentration, solid−liquid ratio, ultrasonic time, and the number of deacidification times, the optimum conditions for the deacidification of safflower seed oil were obtained as follows: ethanol concentration 100%, solid−liquid ratio 1:4, ultrasonic time 29 min, and number of deacidification cycles (×2). The deacidification rate was 97.13% ± 0.70%, better than alkali-refining (72.16% ± 0.13%). The values of acid, peroxide, anisidine and total oxidation of UAEE-deacidified SSO were significantly lower than those of alkali-deacidified SSO (p < 0.05). The contents of the main lipid concomitants such as tocopherols, polyphenols, and phytosterols in UAEE-decidified SSO were significantly higher than those of the latter (p < 0.05). For instance, the DPPH radical scavenging capacity of UAEE-processed SSO was significantly higher than that of alkali refining (p < 0.05). The Pearson bivariate correlation analysis before and after the deacidification process demonstrated that the three main lipid concomitants in SSO were negatively correlated with the index of peroxide, anisidine, and total oxidation values. The purpose of this study was to provide an alternative method for the deacidification of SSO that can effectively remove free fatty acids while maintaining the nutritional characteristics, physicochemical properties, and antioxidant capacity of SSO.

Review on the Regulation of Plant Polyphenols on the Stability of Polyunsaturated-Fatty-Acid-Enriched Emulsions: Partitioning Kinetic and Interfacial Engineering

The plant polyphenols are normally presented as natural functional antioxidants, which also possess the potential ability to improve the physicochemical stability of polyunsaturated fatty acid (PUFA)-enriched emulsions by interface engineering. This review discussed the potential effects of polyphenols on the stability of PUFA-enriched emulsions from the perspective of the molecular thermodynamic antioxidative analysis, the kinetic of interfacial partitioning, and the covalent and non-covalent interactions with emulsifiers. Recently, research studies have proven that the interfacial structure of emulsions can be concurrently optimized via promoting interfacial partitioning of polyphenols and further increasing interfacial thickness and strength. Moreover, the applied limitations of polyphenols in PUFA-enriched emulsions were summarized, and then some valuable and constructive viewpoints were put forward in this review to provide guidance for the use of polyphenols in constructing PUFA-enriched emulsions.

Sorption behaviors of petroleum on micro-sized polyethylene aging for different time in seawater

Microplastics (MPs; <5 mm) and oil pollution have been receiving global attention. To date, the adsorption mechanism of petroleum by MPs is largely unknown. This study investigated the adsorption of petroleum on micro-sized polyethylene (mPE) undergoing aging (days 0, 15, 30, 90 and 180). The petroleum adsorption capacity of mPE was further assessed at varying pH (2, 5, 7.32, 10 and 12), temperature (4, 15, 25, 45 and 65 °C) and in presence of coexisting pollutants (Cu, bisphenol A (BPA) and petroleum). The results indicated that the adsorption capacity of mPE increased with the prolonged aging time and smaller-sized particles, while the adsorption capacity of the 550 and 165 μm mPE undergoing aging increased by 12.7%-50.9% and 22.1%-63.9%, respectively. The adsorption kinetics and isotherm model of mPE on petroleum were well fitted by pseudo-second order, intraparticle diffusion, Freundlich and Langmuir models, showing the sorption behavior was controlled by the diffusion of pores, liquid film diffusion, and surface adsorption. The petroleum adsorption capacity of mPE was predominant affected by surface roughness, specific surface area, hydrophobicity, oxidation functional groups, adsorption sites, hydrogen bonds, while zeta potential and crystallinity may not be the crucial factors. Likewise, temperature and pH may influence the characteristics of petroleum, and further result in a decreasing adsorption capacity of mPE to petroleum. The highest adsorption capacity of mPE to petroleum was reached at pH 7.32 and 25 °C. The coexisting Cu, BPA and petroleum competed for adsorption sites on the surface of mPE. These findings could fundamentally provide new insights for environmental risk assessment of MPs, particularly for the specific location like harbor which is commonly rich in MPs and petroleum simultaneously.

Comparative structural and techno-functional elucidation of full-fat and defatted flaxseed extracts: implication of atmospheric pressure plasma jet

BACKGROUND

The relatively inferior techno-functionality of flaxseed protein/polysaccharide complexes, especially regarding emulsifying and antioxidant activities, has partially limited their implication in the health food system. The present study aimed to investigate the effects of an atmospheric pressure plasma jet (APPJ) on the physicochemical, structural and selected techno-functional properties of flaxseed extracts.

RESULTS

The results obtained showed that the full-fat and defatted flaxseed extract solutions (5 mg mL^-1 ) displayed a sustainable decline in pH (-54.06%, -48.80%, P < 0.05) and zeta potential values (-29.42%, -44.28%, P < 0.05), but a gradual increase in particle sizes, as visualised by an optical microscope, during 0-120 s of APPJ treatment. Moreover, the APPJ led to initial decrease but subsequent increase in protein carbonyls and secondary lipid oxidation products, and concurrently changed the spatial conformation and microstructure of flaxseed extracts, as indicated by endogenous fluorescence properties and scanning electron microscopy (SEM). Additionally, the protein subunit remodeling and gum polysaccharides depolymerization were different for full-fat and defatted flaxseed extracts after 30 s of APPJ exposure. Importantly, the emulsifying and antioxidant activities of defatted flaxseed extract were particularly improved, as assessed by cyro-SEM and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity following 15-30 s of APPJ treatment, as a result of the changing interactions between protein and gum polysaccharides, as well as the release of specific phenolic compounds.

CONCLUSION

APPJ could serve as a promising strategy for tailoring the specific techno-functionality of flaxseed extracts based on mild structural modification. © 2021 Society of Chemical Industry.

Effects of tocopherols on the stability of flaxseed oil-in-water emulsions stabilized by different emulsifiers: Interfacial partitioning and interaction

The potential effects of tocopherols (100 μM in emulsions) on the physicochemical stability of whey protein isolate (WPI), soy lecithin (SL), or Tween 20 (TW) stabilized flaxseed oil (FO)-in-water emulsions were investigated. During the storage (18 days at 55 ℃), the particle size, microstructure, and multiple light scattering results showed WPI-stabilized emulsions exhibited better physical stability when tocopherols were added hydroperoxides and TBARS concentration in TW-stabilized emulsions were higher than those of SL or WPI, which were suppressed differently by tocopherols. Among homologues, δ-tocopherol was more effective in inhibiting lipid oxidation than α-tocopherol, which was related to the higher interface partitioning. Moreover, the increased interfacial tension indicated tocopherols, especially δ-tocopherol, were adsorbed on the interface and interacted with WPI or SL via hydrophobic or electrostatic interactions determined by isothermal titration calorimetry. Our results suggest tocopherols are more applicable in WPI emulsion systems to achieve steady-state delivery of ALA.

Antioxidant and prooxidant activities of tea polyphenols in oil-in-water emulsions depend on the level used and the location of proteins

We studied the impacts of protein location (interface or aqueous phase) on the antioxidant and prooxidant activities of tea polyphenols (TP) in model oil-in-water emulsions (pH 7) at a low (0.01% w/v) or high (0.04 % w/v) concentration. TP at 0.01% reduced the levels of both lipid and protein oxidation markers in emulsions, independent of the protein location. However, TP were more potent when proteins were located at the interface. At 0.04%, TP were only weakly antioxidant towards lipids but were prooxidant towards proteins in emulsions with proteins at the interface, whereas they were still somewhat antioxidant for aqueous phase proteins. These results indicate that TP may act as either antioxidants or prooxidants depending on their concentration and also on the location of the proteins in emulsions. The level of TP should be optimized for emulsion-based foods or beverages to achieve optimum antioxidant activity.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Impact of Tetrapeptide-FSEY on Oxidative and Physical Stability of Hazelnut Oil-In-Water Emulsion

This study investigates the antioxidant behaviors of a hazelnut tetrapeptide, FSEY (Phe-Ser-Glu-Tyr), in an oil-in-water emulsion. The emulsion was prepared with stripped hazelnut oil at a ratio of 10%. O/W emulsions, both with and without antioxidants (FSEY and TBHQ), were incubated at 37 °C. The chemical stabilities, including those of free radicals and primary and secondary oxidation productions, along with the physical stabilities, which include particle size, zeta-potential, color, pH, and ΔBS, were analyzed. Consequently, FSEY displayed excellent antioxidant behaviors in the test system by scavenging free lipid radicals. Both primary and secondary oxidation products were significantly lower in the FSEY groups. Furthermore, FSEY assisted in stabilizing the physical structure of the emulsion. This antioxidant could inhibit the increase in particle size, prevent the formation of creaming, and stabilize the original color and pH of the emulsion. Consequently, FSEY may be an effective antioxidant additive to use in emulsion systems.

Astaxanthin-loaded emulsion gels stabilized by Maillard reaction products of whey protein and flaxseed gum: Physicochemical characterization and in vitro digestibility

In order to evaluate the effect of ultrasound and Maillard reaction on the physicochemical properties and gastrointestinal fate of astaxanthin-loaded emulsion gels, the Maillard reaction products (MRPs) of whey protein and flaxseed gum (FG) were prepared by traditional or ultrasonic assisted wet-heating. The MRPs obtained by ultrasonic assisted wet-heating had higher grafting degree and more expanded structures evidenced by the browning intensity, fluorescence intensity and circular dichroism (CD) analysis, thus enhancing its functional properties like solubility and emulsifying capacity. The MRPs improved the water holding capacity, encapsulation efficiency, stability of emulsion gels, in which astaxanthin was wrapped as a model bioactive compound. During the simulated digestion process, the bioaccessibility of loaded astaxanthin reached 72.08% for the emulsion gels stabilized by MRPs. The results highlighted the potential of MRPs in improving functionality of protein and as a delivery carrier of bioactive compounds in food industry.

Physical Stability, Oxidative Stability, and Bioactivity of Nanoemulsion Delivery Systems Incorporating Lipophilic Ingredients: Impact of Oil Saturation Degree

There is great interest in the application of a lipid-based delivery system (like nanoemulsion) to improve the bioavailability of lipophilic components. Although emulsion characteristics are believed to be influenced by oil types, there is still a lack of systematic research concentrating on the effect of oil saturation degree on the nanoemulsion quality, especially for evaluation of the bioactivity. Here, we aimed to test the effect of oil saturation degree on the physical stability, oxidative stability, and bioactivity of the designed nanoemulision system. Our findings suggest that the oxidative stability and bioactivity of a nanoemulsion incorporating tocopherol and sesamol highly depend on the oil saturation. A nanoemulsion with an oil with a high degree of unsaturation was more susceptible to oxidation, and addition of tocopherol and sesamol could retard the lipid oxidation. Sesamol exhibited better bioactivity during the experiment compared with tocopherol in the Caenorhabditis elegans (C. elegans) model. The lipid-lowering effect of tocopherol and sesamol increased with lower saturation oil groups. The antioxidant activity of tocopherol and sesamol was higher in the high saturation oil groups. Overall, the obtained data is meaningful for applications using the designed systems to deliver lipophilic ingredients.

Effect of different structural flaxseed lignans on the stability of flaxseed oil-in-water emulsion: An interfacial perspective

The influences of the different structural flaxseed lignans on flaxseed oil (FO) emulsions during storage and digestion were investigated, focusing on their interfacial behavior. From perspective of interface, more than 60% of secoisolariciresinol (SECO) and the acidic hydrolysates of flaxseed lignan macromolecule (FLEH) were located on the interface of FO emulsions. It improved the stability of FO emulsions both during storage and digestion by inhibiting of free radical penetration and improving their targeted antioxidative activity. By comparison, the secoisolariciresinol diglucoside (SDG) and the alkaline hydrolysates of flaxseed lignan macromolecule (FLE) largely located in the aqueous and exerted lower antioxidative efficiency in emulsions. Moreover, SDG, SECO, FLE and FLEH slowed down the digestive rate of FO in emulsions, which might be due to flaxseed lignans inhibited the activity of digestive enzymes. These findings suggested that the different structural flaxseed lignans had the potential as antioxidants in emulsions during storage and digestion.

Novel Processes for the Extraction of Phenolic Compounds from Olive Pomace and Their Protection by Encapsulation

Olive pomace, the solid by-product derived from olive oil production consists of a high concentration of bioactive compounds with antioxidant activity, such as phenolic compounds, and their recovery by applying innovative techniques is a great opportunity and challenge for the olive oil industry. This study aimed to point out a new approach for the integrated valorization of olive pomace by extracting the phenolic compounds and protecting them by encapsulation or incorporation in nanoemulsions. Innovative assisted extraction methods were evaluated such as microwave (MAE), homogenization (HAE), ultrasound (UAE), and high hydrostatic pressure (HHPAE) using various solvent systems including ethanol, methanol, and natural deep eutectic solvents (NADESs). The best extraction efficiency of phenolic compounds was achieved by using NADES as extraction solvent and in particular the mixture choline chloride-caffeic acid (CCA) and choline chloride-lactic acid (CLA); by HAE at 60 °C/12,000 rpm and UAE at 60 °C, the total phenolic content (TPC) of extracts was 34.08 mg gallic acid (GA)/g dw and 20.14 mg GA/g dw for CCA, and by MAE at 60 °C and HHPAE at 600 MPa/10 min, the TPC was 29.57 mg GA/g dw and 25.96 mg GA/g dw for CLA. HAE proved to be the best method for the extraction of phenolic compounds from olive pomace. Microencapsulation and nanoemulsion formulations were also reviewed for the protection of the phenolic compounds extracted from olive pomace. Both encapsulation techniques exhibited satisfactory results in terms of encapsulation stability. Thus, they can be proposed as an excellent technique to incorporate phenolic compounds into food products in order to enhance both their antioxidative stability and nutritional value.

A comprehensive review on different classes of polyphenolic compounds present in edible oils

Edible oils are used as a frying medium and in the preparation of several food products. They are mainly constituting triacylglycerols as major components, while other compounds are classified as minor constituents, which include polyphenols. This class of compounds plays an important role in the thermal stability and quality attributes of the finished industrial food products. In addition to other antioxidants, the desired thermal stability of edible is achieved by either fortification or mixing of edible oils. This comprehensive review was therefore aimed to review the different classes of polyphenolic compounds present in commonly consumed edible oils. The edible oils reviewed include soybean, olive, rapeseed, canola, sunflower, flaxseed, sesame, cottonseed, palm, almond, peanut, chestnut, coconut, and hazelnut oils. The identified classes of polyphenolic compounds such as simple phenols, hydroxybenzoic acids, phenylethanoids, hydroxycinnamic acid, esters of hydroxycinnamic acids, coumarins & chromans, stilbenes, flavonoids, anthocyanins, and lignans were discussed. It was observed that a single edible from different origins showed the varied composition of the different classes of phenolic compounds. Among the oils, soybean, sunflower, olive, and brassica oils received higher attention in terms of polyphenol composition. Some classes of phenolic compounds were either not reported or absent in one edible oil, while present in others. Among the different classes of phenolics, hydroxybenzoic acids, hydroxycinnamic acid and flavonoids were the most widely present compounds. Phenolic compounds in edible oils possess several health benefits such as antioxidant, antibacterial, anti-viral, anti-inflammatory, anti-tumour, antioxidants, cardioprotective, neuroprotective, anti-diabetic properties and anti-obesity.

Effect of sesamol on the physical and chemical stability of plant-based flaxseed oil-in-water emulsions stabilized by proteins or phospholipids

Plant-based polyphenols are increasingly being explored as functional ingredients in emulsified food systems. In this study, the effects of sesamol on the physical and chemical stability of flaxseed oil-in-water emulsions stabilized by either phospholipids (sunflower) or proteins (whey or pea) were investigated. In the absence of sesamol, the protein-based emulsions displayed better physical stability than the phospholipid-based ones, which was related to their smaller particle diameter and higher particle charge. For the phospholipid-based emulsions, sesamol addition did not improve their physical stability, but it did inhibit lipid oxidation. In particular, it decreased the formation of secondary oxidation products, with a 65% reduction in TBAR formation compared to the control after 8 days of storage. For the protein-based emulsions, sesamol addition reduced particle aggregation and inhibited lipid oxidation, reducing the secondary oxidation products by around 85% after 19 days of storage. The inhibitory efficiency of sesamol in the pea protein-based emulsions was comparable to that in the whey protein-based ones. The effects of sesamol on the physical and chemical stability of the emulsions were related to its partitioning between the oil, water, and interfacial layers. This study suggests that adding sesamol to plant-based emulsions may improve their physical and chemical stability, thereby extending their shelf life.