Determination of polychlorinated biphenyls in tea using gas chromatography–tandem mass spectrometry combined with dispersive solid phase extraction

Single injection by LC-ESI-MS/MS for simultaneous determination of organophosphate tri- and di-esters in plant tissue based on ultrasonic-assisted sequential extraction and single-step purification

A novel methodology based on ultrasonic-assisted sequential extraction, dispersive-SPE purification, and single-injection on liquid chromatography-tandem mass spectrometry (LC-MS/MS) is proposed, for the first time, to simultaneously measure 14 tri-OPEs and 9 di-OPEs in plant tissues. The samples were successively ultrasonicated with a mixture of hexane:dichloromethane (1:1, v/v) and 8% acetic acid in acetonitrile for extracting tri- and di-OPEs purified with graphitized carbon black and quantitated on LC-MS/MS at the same time. The recoveries of targeted tri- and di-OPEs in the matrix spike ranged from 66% to 120% and 71% to 110% respectively. The proposed method was validated by processing eight types of common vegetables including spinach (Spinacia oleracea L.), lettuce (Lactuca sativa), carrot (Daucus carota var. sativa Hoffm.), sweet potato (Solanum tuberosum L.), cucumber (Cucumis sativus L.), tomato (Solanum lycopersicum L.), green beans (Phaseolus vulgaris), and cowpeas (Vigna unguiculata), with the recoveries of surrogates ranging from 84% to 98%.

Uptake and translocation of organic pollutants in Camellia sinensis (L.): a review

Camellia sinensis (L.) is a perennial evergreen woody plant with the potential for environmental pollution due to its unique growth environment and extended growth cycle. Pollution sources and pathways for tea plants encompass various factors, including atmospheric deposition, agricultural inputs of chemical fertilizers and pesticide, uptake from soil, and sewage irrigation. During the cultivation phase, Camellia sinensis (L.) can absorb organic pollutants through its roots and leaves. This review provides an overview of the uptake and translocation mechanisms involving the absorption of polycyclic aromatic hydrocarbons (PAHs), pesticides, anthraquinone (AQ), perchlorate, and other organic pollutants by tea plant roots. Additionally, we summarize how fresh tea leaves can be impacted by spraying pesticide and atmospheric sedimentation. In conclusion, this review highlights current research progress in understanding the pollution risks associated with Camellia sinensis (L.) and its products, emphasizing the need for further investigation and providing insights into potential future directions for research in this field.

Integrating CRISPR-Cas12a with catalytic hairpin assembly as a logic gate biosensing platform for the detection of polychlorinated biphenyls in water samples

Polychlorinated biphenyls (PCBs) are ubiquitous persistent organic pollutants that cause harmful effects on environmental safety and human health. There is an urgent need to develop an intelligent method for PCBs sensing. In this work, we proposed a logic gate biosensing platform for simultaneous detection of multiple PCBs. 2,3',5,5'-tetrachlorobiphenyl (PCB72) and 3,3',4,4'-tetrachlorobiphenyl (PCB77) were used as the two inputs to construct biocomputing logic gates. We used 0 and 1 to encode the inputs and outputs. The aptamer was used to recognize the inputs and release the trigger DNA. A catalytic hairpin assembly (CHA) module is designed to convert and amplify each trigger DNA into multiple programmable DNA duplexes, which initiate the trans-cleavage activity of CRISPR/Cas12a for the signal output. The activated Cas12 cleaves the BHQ-Cy5 modified single-stranded DNA (ssDNA) to yield the fluorescence reporting signals. In the YES logic gate, PCB72 was used as the only input to carry out the logic operation. In the OR, AND, and INHIBIT logic gates, PCB72 and PCB77 were used as the two inputs. The output signals can be visualized by the naked eye under UV light transilluminators or quantified by a microplate reader. Our constructed biosensing platform possesses the merits of multiple combinations of inputs, intuitive digital output, and high flexibility and scalability, which holds great promise for the intelligent detection of different PCBs.

Ant nest-like hierarchical porous imprinted resin-dispersive solid-phase extraction for selective extraction and determination of polychlorinated biphenyls in milk

Polychlorinated biphenyls (PCBs) are persistent toxic, organic chemicals that tend to accumulate in the food chain. This study reports the rapid and selective extraction and determination of PCBs (PCB81, 153, 105, 126, and 157) in milk samples by a dispersive solid-phase extraction (DSPE) coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS). An ionic liquid-molecularly imprinted porous resin (IL-MIPPR) as a DSPE adsorbent was synthesized from m-aminophenol, formaldehyde, and 2,2'-benzidinedisulfonic acid as the monomer, crosslinker, and virtual template, respectively. The IL-MIPPR had a fast mass transfer (1.0 min) and good selectivity (imprinting factors of 1.8-3.0). The IL-MIPPR - DSPE - GC-MS/MS method exhibited good linearity (R² ≥ 0.9995), the limit of detections (LODs) < 0.6 pg/g, and the recoveries ranged from 82.8 % to 106 % with relative standard deviations ≤ 6.6 %. This method is thus better than previously reported methods in terms of the LOD, the adsorbent dosage, and the extraction time.

Magnetic solid phase extraction and determination of polychlorinated biphenyls in beverages utilizing C60 modified magnetic polyamido-amine dendrimers in combination with gas chromatography-tandem mass spectrometry

Polychlorinated biphenyls (PCBs) are persistent organic pollutants which are widely present in environment and harmful to human health. In this study, an efficient and convenient magnetic solid phase extraction method with C₆₀ modified magnetic polyamido-amine (PAMAM) dendrimers as sorbents was established for enriching trace amounts of PCBs in beverage samples. Gas chromatography-tandem mass spectrometry (GC-MS/MS) was utilized for analysis of PCBs. Parameters affecting extraction efficiency were optimized. Under optimal parameters, good linearity can be achieved in concentration range of 0.001-20 μg L^-1 and 0.002-20 μg L^-1 for nine selected PCBs. The limits of detection for PCBs were in the range of 0.1-0.2 ng L^-1. The spiked recoveries were in the range of 87.0 %-115.1 % (n = 3). The results proved that this established method was reliable for monitoring trace PCBs in beverage samples.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

Short- and medium-chain chlorinated paraffins in green tea from 11 Chinese provinces and their migration from packaging

Chlorinated paraffins (CPs) have been found to occur ubiquitously in foodstuff of both animal and plant origin. However, limited information is available on the content of CPs in green tea, one of the most commonly consumed beverages worldwide. Herein, 107 commercial green tea samples originating from 11 provinces of China, were collected to study the occurrence of short- and medium-chain chlorinated paraffins (SCCPs and MCCPs, respectively). The concentration of SCCPs in all green tea samples ranged from 4.99 to 717 ng/g (mean: 55.7 ng/g), while MCCPs ranged from 2.55 to 543 ng/g (mean: 33.5 ng/g). CP profiles in green tea samples from different provinces exhibited no regional differences. To identify the potential sources of CPs in green tea, 19 tea packaging samples were collected and analyzed, showing that SCCPs and MCCPs existed at much higher concentrations in the tea packaging material than in the teas. Migration tests indicated that CPs could migrate from packaging into teas during storage, with the migration velocity and efficiency of SCCPs being higher than MCCPs.

Ultrasonic Solvent Extraction Followed by Dispersive Solid Phase Extraction (d-SPE) Cleanup for the Simultaneous Determination of Five Anthraquinones in Polygonum multiflorum by UHPLC-PDA

A rapid and effective ultra-high performance liquid chromatography (UHPLC) method was developed for the determination of five anthraquinones (emodin, physcion, aloe-emodin, rhein, and chrysophanol) in Polygonum multiflorum. The target compounds were ultrasonically extracted with 70% methanol, followed by dispersive solid-phase extraction (d-SPE) with HC-C18 and desorption with acetonitrile. The five anthraquinones were separated on an ACQUITY UPLC® HSS T3 column (2.1 × 100 mm, 1.8 μm) and detected by a photodiode array detector (PDA) at 254 nm. Under the optimized conditions, linear relationships were achieved in the range of 0.3~100 mg/L for emodin, 0.3~40 mg/L for physcion, 0.1~20 mg/L for aloe-emodin, and 0.05~20 mg/L for rhein and chrysophanol. The limits of detection of the five analytes ranged from 0.01 to 0.08 mg/L, and the recoveries were within the range of 82.8~118.4% with an RSD (n = 6) of 1.0~10.3%. The intra-day and inter-day precision (n = 5) of the five targets were in the range of 1.0~1.8% and 3.0~3.1%, respectively. Furthermore, this method was applied to analyses of Polygonum multiflorum samples collected from different regions in China with satisfactory results. All the results indicated that this method is suitable for the detection of five anthraquinones in Polygonum multiflorum.

Comprehensive Strategy for Sample Preparation for the Analysis of Food Contaminants and Residues by GC-MS/MS: A Review of Recent Research Trends

Food safety and quality have been gaining increasing attention in recent years. Gas chromatography coupled to tandem mass spectrometry (GC-MS/MS), a highly sensitive technique, is gradually being preferred to GC-MS in food safety laboratories since it provides a greater degree of separation on contaminants. In the analysis of food contaminants, sample preparation steps are crucial. The extraction of multiple target analytes simultaneously has become a new trend. Thus, multi-residue analytical methods, such as QuEChERs and adsorption extraction, are fast, simple, cheap, effective, robust, and safe. The number of microorganic contaminants has been increasing worldwide in recent years and are considered contaminants of emerging concern. High separation in MS/MS might be, in certain cases, favored to sample preparation selectivity. The ideal sample extraction procedure and purification method should take into account the contaminants of interest. Moreover, these methods should cooperate with high-resolution MS, and other sensitive full scan MSs that can produce a more comprehensive detection of contaminants in foods. In this review, we discuss the most recent trends in preparation methods for highly effective detection and analysis of food contaminants, which can be considered tools in the control of food quality and safety.

Applications of covalent organic frameworks and their composites in the extraction of pesticides from different samples

Pesticides are used extensively in a wide range of applications and due to their high rate of consumption, they are ubiquitous in the different media and samples like environment, water sources, air, soil, biological materials, wastes (liquids, solids or sludges), vegetables and fruits, where they can persist for long periods. Pesticides often have hazardous side effects and can cause a range of harmful diseases like Parkinson, Alzheimer, asthma, depression and anxiety, cancer, etc, even at low concentrations. To this end, extraction, pre-concentration and determination of pesticides from various samples presents significant challenges caused by sample complexity and the low concentrations of them in many samples. Often, direct extraction and determination of pesticides are impossible due to their low concentrations and the complexity of samples. The main goals of sample preparation are removing interfering species, pre-concentrating target analyte/s and converting the analytes into more stable forms (when needed). The most popular approach is solid-phase extraction due to its simplicity, efficiency, ease of operation and low cost. This method is based on using a wide variety of materials, among which covalent organic frameworks (COFs) can be identified as an emerging class of highly versatile materials exhibiting advantageous properties, such as a porous and crystalline structure, pre-designable structure, high physical and chemical stability, ease of modification, high surface area and high adsorption capacity. The present review will cover recent developments in synthesis and applications of COFs and their composites for extraction of pesticides, different synthesis approaches of COFs, possible mechanisms for interaction of COFs-based adsorbents with pesticides and finally, future prospects and challenges in the fabrication and utilization of COFs and their composites for extraction of pesticides.

Preparation of Ti3 C2 Tx MXene based solid-phase microextraction coating for sensitive determination of polychlorinated biphenyls in environmental water samples

In this study, a new Ti₃ C₂ T_x -coated fiber was synthesized and utilized as coatings for solid-phase microextraction of seven polychlorinated biphenyls. The as-produced multilayered Ti₃ C₂ T_x MXene was characterized by X-ray diffractometer, thermos-gravimetric analysis, scanning electron microscopy, and energy dispersive spectroscopy. It is noteworthy that the Ti₃ C₂ T_x showed some attractive features including unique 2D layered structures, large surface area, good hydrophilicity, and rich active recognition sites, endowing it has a high affinity towards the target polychlorinated biphenyls. Subsequently, the affecting parameters on the extraction efficiency of polychlorinated biphenyls were optimized. Under the optimal conditions, a novel method for the analysis of polychlorinated biphenyls in water samples was proposed. The Ti₃ C₂ T_x -coated fiber-based solid-phase microextraction method showed good linearity (r²  > 0.9928), high enrichment factors (268-442), low limits of detection (0.06-0.15 ng/L), and satisfactory repeatability (RSDs < 7.5%) for the polychlorinated biphenyls. The excellent method recoveries were in the range of 90.0-98.4, 92.0-98.2, and 92.0-98.0% for river water, lake water, and tap water samples, respectively. These results suggested that the proposed Ti₃ C₂ T_x -coated fiber-based method represents a promising alternative for the analysis of polychlorinated biphenyls.

Persistent organic pollutants (PCBs and PCDD/Fs), PAHs, and plasticizers in spices, herbs, and tea - A review of chromatographic methods from the last decade (2010-2020)

Edible and highly demanded plant-derived products such as herbs, spices, and tea may be subjected to exogenous contamination of well-known chemical hazards such as persistent organic pollutants (POPs), and emerging ones such as plasticizers, affecting negatively the safety of these food commodities. This fact has led to the increasing analysis of exogenous compounds including priority POPs such as polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs), as well as highly persistent polycyclic aromatic hydrocarbons (PAHs). Currently, plasticizer residues are also considered an emerging issue because of the extensive use in food packaging and potential migration into foodstuffs. In this review, the studies published from 2010 to 2020 were discussed, including the main extraction methods applied for these contaminants from herbs, spices, and tea, and it was revealed the trend toward the use of less solvent-consuming and time-effective methods. Chromatographic methods were also described, which were mainly combined with detection techniques such as classical or mass spectrometry (MS) detection. Finally, a comprehensive overview of the occurrence of these selected exogenous compounds was presented in the studied matrices, showing that their monitoring should be further investigated to ensure food safety of highly consumed condiments and tea.

Dispersive solid phase extraction combined with solidification of floating organic drop-liquid-liquid microextraction using in situ formation of deep eutectic solvent for extraction of phytosterols from edible oil samples

In this study, a dispersive solid phase extraction method was combined with solidification of floating organic drop-liquid-liquid microextraction based on in situ synthesis of deep eutectic solvent. It was used for the extraction of some phytosterols from edible oil samples. The extracted analytes were quantified by gas chromatography-mass spectrometry. In this procedure, the sample lipids are saponified with sodium hydroxide and then the analytes are adsorbed onto an octadecylsilane sorbent. After that the analytes are desorbed from the sorbent with ethanol as an elution solvent and the eluant is diluted with deionized water to obtain a homogenous solution. Then, a few amounts of choline chloride and n-butyric acid are dissolved in the solution and transferred into a water batch adjusted at 75 ⁰C for 5 min. During this period Choline chloride and n-butyric acid form a deep eutectic solvent (extraction solvent) dispersed in whole parts of the solution. The obtained cloudy solution is placed into an ice bath. The extraction solvent is collected and solidified on the top of the solution. Finally, it is removed and allows melted at room temperature and an aliquat of the solution is injected into the separation system. Validation of the method showed that limits of detection and quantification were in the ranges of 0.52-1.6 and 1.7-5.6 ng mL-1, respectively. Enrichment factors and extraction recoveries of the analytes ranged from 312 to 375 and 75-90%, respectively. The method had a proper percision with relative standard deviations less than ≤8.2% for intra- (n = 6) and inter-day (n = 6) precisions at a concentration of 15 ng mL-1 of each analyte. Finally the method was successfully used for determination of the analytes in some edible oil samples.