Determination of trace metals in vegetables and water samples using dispersive ultrasound-assisted cloud point-dispersive µ-solid phase extraction coupled with inductively coupled plasma optical emission spectrometry

Recent Advances in the Determination of Major and Trace Elements in Plants Using Inductively Coupled Plasma Optical Emission Spectrometry

Interest in measuring major and trace elements in plants has increased in recent years because of growing concerns about the elements' contribution to daily intakes or the health risks posed by ingesting vegetables contaminated by potentially toxic elements. The recent advances in using inductively coupled plasma atomic emission spectrometry (ICP-OES) to measure major and trace elements in plant samples are reviewed in the present work. The sample preparation before instrumental determination and the main advantages and limitations of ICP-OES are described. New trends in element extraction in liquid solutions using fewer toxic solvents and microextractions are observed in recently published literature. Even though ICP-OES is a well-established and routine technique, recent innovations to increase its performance have been found. Validated methods are needed to ensure the obtaining of reliable results. Much research has focused on assessing principal figures of merit, such as limits of detection, quantification, selectivity, working ranges, precision in terms of repeatability and reproducibility, and accuracy through spiked samples or certified reference materials analysis. According to the published literature, the ICP-OES technique, 50 years after the release of the first commercially available equipment, remains a powerful and highly recommended tool for element determination on a wide range of concentrations.

Simultaneous preconcentration and quantification of ultra-trace tin and lead species in seawater by online SPE coupled with HPLC-ICP-MS

BACKGROUND

Tin and lead contamination is a global threat to marine ecosystems considering their species-specific toxicity, bioavailability and mobility. Hence simultaneous measurement of multiple tin and lead compounds at μg L-1 to pg L-1 levels in environmental water is always an indispensable but challengeable task. High performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (HPLC-ICP-MS) is one of the most widely used choices for this purpose because of good sensitivity, strong separation power and good compatibility. Previous HPLC-ICP-MS methods based on a single elemental speciation strategy are low-efficiency and sensitivity-insufficient for a large set of unstable samples and interaction of multiple metal(loid)s down to ng L-1 levels.

RESULTS

In this study, we developed a sensitive, efficient and environment-friendly analytical method for accurate quantification of inorganic and organic species of tin and lead simultaneously based on HPLC-ICP-MS with online integration of solid phase extraction (SPE). By using graphene oxide modified silica conditioned with 1 mM benzoic acid to enrich tin and lead species from 10 mL sample, detection limits were improved to 2-8 pg per liter due to satisfactory enrichment factors (522-2848 folds). The SPE-HPLC-ICP-MS method was applicable to quantification of ultra-trace tin and lead species at pg L-1 levels in uncontaminated seawater. Tributyltin was the only tin species detected at subnanograms per liter levels while Pb(II) was the only lead species detected at several nanograms per liter in thirteen coastal seawater samples collected in Hangzhou Bay, indicating light contamination of tin and lead.

SIGNIFICANCE

Overall, the proposed SPE-HPLC-ICP-MS method is highly sensitive, efficient and environment-friendly that are fairly suitable to routine speciation analysis of tin and lead in environmental, food, and biological samples.

Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Novel poly (N-methacryloyl-L-alanine acid) grafted chitosan microspheres based solid-phase extraction coupled with ICP-MS for simultaneous detection of trace metal elements in food

Poly (N-methacryloyl-L-alanine acid) grafted tartaric acid-crosslinked chitosan microspheres (PNMA-TACS) were successfully synthesized and employed as a novel adsorbent for the separation and enrichment of metal ions in the food system. PNMA-TACS microspheres-based solid phase extraction (SPE) was coupled with ICP-MS for accurate quantification of trace V(V), Cr(III), As(III), Pb(II), Cd(II) and Cu(II). The obtained PNMA-TACS microspheres were characterized, and parameters influencing the method were optimized. Under optimal conditions, the calibration curves for Cu(II) and V(V) were linear within 0.01-30 μg L-1, the linear ranges of Cr(III), As(III), Pb(II) and Cd(II) were 0.01-15 μg L-1, and the detection limit of the developed approach was 1.1-3.7 ng L-1. The results were consistent with the consensus values of method validation implemented by two standards. Moreover, standard addition recovery experiments were performed in rice and milk powder, which achieved satisfactory recovery of 86.1-103.5%.

Improvement in the Chromium(VI)-Diphenylcarbazide Determination Using Cloud Point Microextraction; Speciation of Chromium at Low Levels in Water Samples

A reliable, rapid, and low-cost procedure for determining very low concentrations of hexavalent chromium (Cr) in water is discussed. The procedure is based in the classical reaction of Cr6+ with diphenylcarbazide. Once this reaction has taken place, sodium dodecylsulfate is added to obtain an ion-pair, and Triton X-114 is incorporated. Next, the heating of the mixture allows two phases that can be separated by centrifugation to be obtained in a cloud point microextraction (CPE) process. The coacervate contains all the Cr6+ originally present in the water sample, so that the measurement by molecular absorption spectrophotometry allows the concentration of the metal to be calculated. No harmful organic solvents are required. The discrimination of hexavalent and trivalent forms is achieved by including an oxidation stage with Ce4+. To take full advantage of the pre-concentration effect inherent to the coacervation process, as well as to minimize reagent consumption and waste generation, a portable mini-spectrophotometer which is compatible with microvolumes of liquid samples is used. The preconcentration factor is 415 and a chromium concentration as low as 0.02 µg L-1 can be detected. The procedure shows a good reproducibility (relative standard deviation close to 3%).

Innovative approaches in cloud-point extraction

Cloud-point extraction (CPE) is a pre-treatment technique for the extraction and preconcentration of different chemical compounds, such as metal ions, pesticides, drugs, phenols, vitamins etc., from various samples. CPE is based on the phenomenon of two phases (micellar and aqueous) forming after the heating of an aqueous isotropic solution of a non-ionic or zwitterionic surfactant above the cloud-point temperature. If analytes are added to the surfactant solution under suitable conditions, they should be extracted into the micellar phase, also called the surfactant-rich phase. Recently, the traditional CPE procedure is being increasingly replaced by improved CPE procedures. In this study, recent advances in CPE over the last three years (2020 - 2022), including the application of various innovative approaches, are reviewed. In addition to the basic principle of CPE, alternative extraction media in CPE, CPE supported by various auxiliary energies, a different modified CPE procedure and the use nanomaterials and solid-phase extraction in combination with CPE are presented and discussed. Finally, some future trends for improved CPE are presented.

Determination of lead in Gentiana rigescens and evaluation of the effect of lead exposure on the liver protection of the natural medicine

In this work, ultrasound-assisted rapidly synergistic cloud point extraction (UARS-CPE) and inductively coupled plasma optical emission spectrometry (ICP-OES) were combined to determine trace Pb in Gentiana rigescens Franch. ex Hemsl. (G. rigescens) samples. Under the optimal conditions, the enhancement factor (EF), limit of detection (LOD), limit of quantitation (LOQ) and precision were 33, 0.11 μg L^-1, 0.37 μg L^-1 and 1.3%, respectively. This method was applied to the analysis of G. rigescens samples, and the outcomes were in good agreement with the results determined by inductively coupled plasma mass spectrometry (ICP-MS). A mice model of immune liver injury induced by concanavalin A (ConA) was established, and the liver protection of G. rigescens and gentiopicroside (GPS) on it and the effects of various dosages of Pb exposure on its liver protection were studied. Pb at a dosage of 5 mg kg^-1 had little effect on the liver protection of G. rigescens and GPS, while 25, 125 mg kg^-1 dosages of Pb could significantly attenuate the liver protection of both. In addition, it aggravated the necrosis of hepatocytes and inflammatory cell infiltration, and these effects were dose-dependent.

Ultra-trace determination of cadmium in water and food samples by a thin-film microextraction using a supported liquid membrane combined with smartphone-based colorimetric detection

A mixture of n-octanol and dithizone was introduced as an effective and novel extraction agent in a thin-film microextraction technique for the pre-concentration of cadmium ions. The extraction agent was immobilized on small pieces of porous polypropylene flat membrane as a supported liquid membrane. The analyte extraction was performed by immersing the modified film in the sample solution, and via a complex formation between the immobilized dithizone on the film and cadmium ions. After the thin-film microextraction process, the colored cadmium-dithizone complex was directly measured by a smartphone colorimetric analysis. Under optimized conditions, the linear dynamic range, the limit of detection, and the limit of quantification were 0.5-300.0, 0.1, and 0.4 μg L^-1, respectively. The developed technique was successfully employed to quantify cadmium ions in water and food samples. The high relative recovery values (95.0-103.0%) along with relative standard deviations of less than 2.5% were obtained for the spiked samples.

Lignin-based covalent organic polymers with improved crystallinity for non-targeted analysis of chemical hazards in food samples

Lignin, the most abundant source of renewable aromatic compounds derived from natural lignocellulosic biomass, has great potential for various applications as green materials due to its abundant active groups. However, it is still challenging to quickly construct green polymers with a certain crystallinity by utilizing lignin as a building block. Herein, new green lignin-based covalent organic polymers (LIGOPD-COPs) were one-pot fabricated with water as the reaction solvent and natural lignin as the raw material. Furthermore, by using paraformaldehyde as a protector and modulator, the LIGOPD-COPs prepared under optimized conditions displayed better crystallinity than reported lignin-based polymers, demonstrating the feasibility of preparing lignin-based polymers with improved crystallinity. The improved crystallinity confers LIGOPD-COPs with enhanced application performance, which was demonstrated by their excellent performances in sample treatment of non-targeted food safety analysis. Under optimized conditions, phytochromes, the main interfering matrices, were almost completely removed from different phytochromes-rich vegetables by LIGOPD-COPs, accompanied by "full recovery" of 90 chemical hazards. Green, low-cost, and reusable properties, together with improved crystallinity, will accelerate the industrialization and marketization of lignin-based COPs, and promote their applications in many fields.

Easily operated COF-based monolithic sponges as matrix clean-up materials for non-targeted analysis of chemical hazards in oil-rich foods

Non-targeted analysis of chemical hazards in foods plays a crucial role in controlling food safety. However, because it brings forward high demand for sample pretreatment, materials suitable for the pretreatment of foods, especially animal foods, are rare. Herein, covalent organic frameworks (COF)-based monolithic materials were constructed by three successive steps: preparation of polydimethylsiloxane (PDMS) sponge using sugar cube as a sacrificial template, loading of a heteroporous COF on PDMS sponge via ultrasonic or in-situ growth method, coating of the obtained PDMS@COF by polydopamine (PDA) network. As-prepared PDMS@COF@PDA sponges were demonstrated to work well in sample pretreatment of animal foods for non-targeted analysis of chemical hazards. After a simple vortex treatment for about 2 min, more than 98% triglycerides, the main interfering matrix components in animal foods, could be removed from lard and pork samples, accompanied by "full recovery" (recovery efficiencies: ≥63%) of 44 chemical hazards with different physicochemical properties. Besides providing promising sample pretreatment materials for non-targeted food safety analysis, this work also paves a feasible way to improve COF-based monolithic materials and thus promote their practical applications, because we found that the introduction of PDA network on COF-based monolithic material surface could play a role in "killing three birds with one stone": enhancing the stability of the materials by overcoming the detachment of COF during operations; controllably adjusting hydrophobic and hydrogen-bonding interactions on the material surface to promote the removal of triglycerides; weakening the hydrophobic and π-π interactions between COF and chemical hazards to increase the recoveries of chemical hazards.

Highly efficient and simultaneous magnetic solid phase extraction of heavy metal ions from water samples with l-Cysteine modified magnetic polyamidoamine dendrimers prior to high performance liquid chromatography

Due to the strong metal-sulfur interaction between mercapto groups and metal ions, which can be used to functionalize polyamidoamine dendrimer decorated Fe₃O₄ nanoparticles for high enrichment of trace heavy metal ions from waters. Based on this concept, polyamidoamine dendrimer modified Fe₃O₄ nanomaterials were functionalized with l-Cysteine and a new magnetic solid phase extraction for rapid adsorption and separation of Hg²⁺, Pb²⁺, Co²⁺ and Cd²⁺ from waters was established. The factors affecting extraction efficiency have been optimized. Upon the optimal parameters, the established method provided good linear ranges of 0.1-200 μg L^-1 for Hg²⁺ and 0.05-200 μg L^-1 for Pb²⁺, Co²⁺ and Cd²⁺, and high sensitivity with limits of detection (LOD) of 0.018 μg L^-1, 0.014 μg L^-1, 0.013 μg L^-1 and 0.025 μg L^-1 for Cd²⁺, Pb²⁺, Co²⁺ and Hg²⁺, respectively. Real water samples were utilized to validate the proposed method, and achieved results revealed that the proposed method was sensitive, effective, stable and suitable for monitoring Pb²⁺, Cd²⁺, Co²⁺and Hg²⁺ in environmental waters. This work provided a novel strategy for the simultaneous analysis of target cations in waters, and a new direction for developing decoration method of nanomaterials according to specific purpose.

Novel Graphene oxide-Polyethylene Glycol mono-4-nonylphenyl Ether adsorbent for solid phase extraction of Pb2+ in blood and water samples

A novel and efficient Graphene Oxide-Polyethylene Glycol mono-4-nonylphenyl Ether (GO-PEGPE) nanocomposite was synthesized and used for solid phase extraction of trace levels of Pb²⁺ in different water and blood samples. The synthesized adsorbent was then characterized by the Fourier Transform-Infrared spectrophotometry (FT-IR), Field Emission-Scanning Electron Microscopy (FE-SEM), Energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction analysis (XRD). To optimize the critical parameters including pH of samples solution, amounts of adsorbent and extraction time, the response surface methodology based on the central composite design (RSM-CCD) was used and based on the results, pH = 6.0, extraction time = 22 min and amounts of adsorbent = 15 mg were selected as the optimum conditions. The relative standard deviation based on seven replicate analysis of 2 µg L^-1 Pb²⁺ was 5.2% and the limit of detection was 0.023 µg L^-1 (n = 8). The results of adsorption isotherm investigation show that the adsorption of Pb²⁺ onto the GO-PEGPE nanocomposite obeyed by the Langmuir isotherm with the maximum adsorption capacity of 69.44 mg g^-1. Also, based on the Temkin and Dubinin-Radushkevich (DR) isotherms, the adsorption of Pb²⁺ onto the GO-PEGPE nanocomposite is a physisorption phenomenon and the consequences of the kinetic models illustrated that the adsorption of Pb²⁺ followed by the pseudo second order adsorption kinetic model. Finally, the proposed method was successfully applied for preconcentration of Pb²⁺ in different water and blood samples of turning industry workers.

Ultrasonic-assisted dispersive liquid-liquid microextraction based on hydrophilic deep eutectic solvents: Application to lead and cadmium monitoring in water and food samples

A green and innovative ultrasonic-assisted dispersive liquid-liquid microextraction using hydrophilic deep eutectic solvents (UA-HDES-DLLME) was developed for the selective and simultaneous extraction and enrichment of Pb (II) and Cd (II) in water and food samples for flame atomic absorption spectrometry. Several natural deep eutectic solvents (NADES) were used for the preparation of six different HDES and methyl violet was used as chelating reagent. Effective parameters such as pH, sonication time, methyl violet amount, DES type, dispersive solvent types, etc were optimized. Relative standard deviation (RSD) and preconcentration factor (PF) were 4.0% and 80. Low limits of detection (LOD, 1.3 ng mL^-1 for Pb (II) and 0.33 ng mL^-1 for Cd (II)) and quantification (LOQ, 4.0 ng mL^-1 for Pb (II) and 1.0 ng mL^-1 for Cd (II)) were found. The method accuracy was confirmed with analyses of certified reference materials.

Turn-off detection of Cr(III) with chelation enhanced fluorescence quenching effect by a naphthyl hydrazone Shiff base chemosensor

A thiophene substituted naphthyl hydrazone derivative NHT was synthesized using a one-step route for the detection of trivalent chromium (Cr³⁺). UV-visible absorption and emission spectra, density functional theory calculations as well as ¹H NMR titration confirmed that the probe underwent a turn-off response via the chelation enhanced fluorescence quenching effect upon exposure to Cr³⁺ and the NHT-Cr³⁺ complex was formed at a 1:1 binding stoichiometry. NHT exhibited a fast response rate of 2.3 min in buffer solution and a relatively low limit of detection of 41 nM. In addition, the Schiff base chemosensor exhibited excellent selectivity with high affinity towards Cr³⁺ in the presence of other competing cations. Bioimaging of the probe in PC3 cells further demonstrated the potential real life application of the probe in detecting Cr³⁺.

Green Extraction Techniques as Advanced Sample Preparation Approaches in Biological, Food, and Environmental Matrices: A Review

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted.

In situ adsorbent formation based dispersive micro-solid phase extraction using a deep eutectic solvent as an elution solvent for the extraction of some pesticides from honey samples prior to GC-MS analysis

In this work, a simple, inexpensive, green, and fast dispersive micro-solid phase extraction method has been developed for the extraction of several pesticides from honey samples. In this approach, a solution of curcumin was prepared in ethanol and it was dispersed into a sample solution with the aid of a syringe. Curcumin was precipitated in the sample solution as tiny particles and the analytes were adsorbed onto them. After centrifugation the adsorbed analytes were eluted with tetrabutylammonium chloride:dichloroacetic acid deep eutectic solvent. The dissolved analytes in the deep eutectic solvent were analyzed by gas chromatography-mass spectrometry. Parameters affecting the extraction efficiency of the method including sorbent amount, dispersive solvent type and volume, elution solvent type and volume, salting out effect, and sonication time were investigated. Extraction recovery of the method was obtained in the range of 70-83%. Also wide calibration ranges and low detection limits (0.22-0.81 ng g^-1) were obtained. Relative standard deviation values for intra- and inter-day precisions were ≤10.2% for all analytes at a concentration of 5 ng g^-1 of each (n = 6). Finally, ten honey samples were analyzed and data showed that all of the studied samples were free of the analytes.

Selective extraction and determination of Cr(VI) in food samples based on tandem electromembrane extraction followed by electrothermal atomic absorption spectrometry

In this study, electromembrane extraction (EME) combined with micro-EME (µ-EME) was used for the selective extraction of Cr(VI) from food samples (milk powder, Ocimum basilicum, and fish samples). Electrothermal atomic absorption spectrometry was used for the quantification of Cr(VI). Under the optimized extraction conditions, the extraction recovery of Cr(VI) was 73.7%. This proposed method provided a linear range from 0.01 to 5.0 ng/mL and the limit of detection (LOD) and limit of quantification (LOQ) were 0.003 and 0.010 ng/mL. The %RSD (n = 5) was in the range of 11.2-11.8% at 0.05, 1.0 and 2.5 ng/mL of Cr(VI), and the enrichment factor was 584. The accuracy of the method was evaluated by analysis of SRM 2700 as a certified reference material (CRM) and result was in good agreement with the certified value.

Application of curcumin as a green and new sorbent in deep eutectic solvent-based dispersive micro-solid phase extraction of several polycyclic aromatic hydrocarbons from honey samples prior to gas chromatography-mass spectrometry determination

A green, simple, and efficient dispersive micro-solid phase extraction method was developed for the extraction of polycyclic aromatic hydrocarbons from honey samples. In this method, for the first time, curcumin was used as an efficient and green sorbent to extract the analytes from the sample. After that the adsorbed analytes were eluted using a deep eutectic solvent prepared by mixing tetrabutylammonium chloride: ethylene glycol and analyzed by gas chromatography-mass spectrometry. Important experimental factors affecting adsorption and desorption steps of the method were optimized and under optimal experimental conditions, low limits of detection (0.14-0.37 ng/g) and quantification (0.49-1.3 ng/g), wide linear range (1.3-500 ng/g) with a coefficient of determination ≥0.994 were obtained. Relative standard deviation values for intra- and interday precisions were ≤7.5% for all of the analytes at a concentration of 2 ng/g for each analyte (n = 6). Extraction recovery of the method was in the range of 72-81%. Finally, 20 honey samples were analyzed and the analytes were successfully detected. The method is environment friendly because of the use of curcumin as a sorbent. Also, biodegradability of the used deep eutectic solvent components is another advantage of the method.

A new analytical approach for preconcentration, separation and determination of Pb(II) and Cd(II) in real samples using a new adsorbent: Synthesis, characterization and application

A green and efficient analytical approach was reported for simultaneous preconcentration, and separation of Pb(II) and Cd(II) in water, vegetables, and barbecue samples by dispersive solid-phase microextraction prior to their determination using flame atomic absorption spectrometry. A new poly-3-hydroxy butyrate-polyvinyl triethyl ammonium chloride comb-type amphiphilic cationic block copolymer (PHBvbNCl) was synthesized and characterized. Main variables such as pH, sorbent amount, adsorption time, eluent type, desorption time, and sample volume were optimized. Detection limits and working ranges for Pb(II) and Cd(II) were 0.03 μg L^-1, 0.15 μg L^-1, 0.1-250 μg L^-1 and 0.5-375 μg L^-1, respectively. Enhancement factor for Pb (II) and Cd (II) were 114 and 98. The adsorption capacity of PHBvbNCl for Pb(II) and Cd(II) was 175.2 mg g^-1 and 152.9 mg g^-1. After the accuracy of the method was confirmed by the analysis of certified reference materials, it was successfully applied to real samples. Finally, the analytical performance of the present method was compared with other methods.

Highly selective simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii) in water samples using microfluidic paper-based analytical devices

A new paper-based analytical device design was fabricated by a wax printing method for simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii). Colorimetry was used to quantify these heavy metal ions using bathocuproine (Bc), dimethylglyoxime (DMG), dithizone (DTZ), and 4-(2-pyridylazo) resorcinol (PAR) as complexing agents. The affinity of complexing agents to heavy metal ions is dependent on the formation constant (Kf). To enhance the selectivity for heavy metal ion determination, the new device was designed with two pretreatment zones, where masking agents remove the interfering ions. It was found that two pretreatment zones worked better than a single pretreatment zone at removing interferences. The reaction time, sample and complexing agent volumes, and complexing agent concentrations were optimized. The analytical results were achieved with the lowest detectable concentrations of 0.32, 0.59, 5.87, 0.20, and 0.11 mg L-1 for Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii), respectively. The linear ranges were found to be 0.32-63.55 mg L-1 (Cu(ii)), 0.59-4.71 mg L-1 (Co(ii)), 5.87-352.16 mg L-1 (Ni(ii)), 0.20-12.04 mg L-1 (Hg(ii)), and 0.11-0.55 mg L-1 (Mn(ii)). The lowest detectable concentration and linearity for the five metal ions allow the application of this device for the determination of heavy metal ions in various water samples. The sensor showed high selectivity and efficiency for simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii) in drinking, tap, and pond water samples on a single device and detection with the naked eye. The results illustrated that the proposed sensor showed good accuracy and precision agreement with the standard ICP-OES method.

Determination of prohibited lead and cadmium traces in hair dyes and henna samples using ultrasound assisted-deep eutectic solvent-based liquid phase microextraction followed by microsampling-flame atomic absorption spectrometry

In this study ultrasound assisted-deep eutectic solvent-based liquid phase microextraction followed by microsampling-flame atomic absorption spectrometry was developed to determine prohibited lead and cadmium traces in hair dye and henna samples. For this purpose, deep eutectic solvent, prepared from choline chloride and phenol, was used as an extraction solvent, dithizone was used as a complexing agent, and THF was used as an aprotic solvent. All parameters that affect extraction efficiency, such as pH, the DES volume and composition, the extraction time, the amount of dithizone, were optimized. Under the optimal conditions, for Pb(ii) and Cd(ii), enhancement factors of 92 and 57, LODs of 2.5 μg L^-1 and 0.75 μg L^-1, LOQs of 7.8 μg L^-1 and 2.5 μg L^-1, linear working ranges of 10-250 μg L^-1 and 2.5-50 μg L^-1, were obtained, respectively. Relative standard deviation (n = 10) was calculated to be 2.7 for 100 μg L^-1 of Pb(ii) and 2.1 for 25 μg L^-1 of Cd(ii). The matrix effect was investigated by comparing the solvent-based calibration curve with the matrix-matched calibration curve. The determination of lead and cadmium in hair dye and henna samples without being affected by the sample matrix was successfully performed. The lead content was between 1.3 and 6.5 μg g^-1, and the cadmium content was between 0.028 and 0.54 μg g^-1 for the selected hair dye and henna samples.

Removal of Lead(II) from Aqueous Solution Using Triton X-114 in the Presence of Alanine or Phenylalanine as Biodegradable System

The Cloud Point Extraction (CPE) of Pb(II) ion, using Triton X-114/ alanine and Triton X-114/phenyalanine as biodegradable systems, was carried out. The experimental results are expressed by four responses to surfactant concentration, amino acid concentration and temperature variations: extent of solute extraction (E), remaining solute (Xm,w) and surfactant (Xt,w) concentrations in dilute phase and volume fraction of coacervate (}C) at equilibrium. An empirical smoothing method was used, where the results were represented on three dimensional plots using the Box-Behnken design (BBD) and the response surface methodology (RSM). High extraction efficiencies (94% with alanine and 98% with phenylalanine) are reached in optimal conditions. Thereby, solute concentration reduction in the dilute phase is about 4 and 12 times with alanine and phenylalanine, respectively. The pH effect is also studied. Finally, the possibility of recycling the surfactant/amino acid system by pH change is proved.

Nanographene oxide modified phenyl methanethiol nanomagnetic composite for rapid separation of aluminum in wastewaters, foods, and vegetable samples by microwave dispersive magnetic micro solid-phase extraction

A new method based on graphene oxide modified (4-phenyl) methanethiol nanomagnetic composite (Fe₃O₄@4-PhMT-GO) was used for extraction and separation of aluminum from wastewater, food, and vegetable samples in aluminum cookware by microwave dispersive magnetic micro solid-phase extraction (MDM-μ-SPE). In optimized conditions, the working range (WR), the linear range (LR), the limit of detection (LOD), and enrichment factor (EF) were obtained 5-5200 μg L^-1, 5-1600 μg L^-1, 1.5 µg L^-1, and 48.8, respectively (RSD% = 2.5). By MDM-μ-SPE procedure, the aluminum concentrations in baking rice and spinach with aluminum cookware were obtained 97.43 ± 2.57 mg g^-1 and 131.64 ± 5.18 mg g^-1, respectively which was analyzed by atom trap flame atomic absorption spectrometer (AT-FAAS). The results showed, the aluminum concentrations in cooked foods with Teflon cookware were less than aluminum cookware. The methodology was validated by standard reference materials (SRM) and inductively coupled plasma mass spectrometry analysis (ICP-MS).