On-site, rapid and visual determination of Hg2+ and Cu2+ in red wine by ratiometric fluorescence sensor of metal-organic frameworks and CdTe QDs

Ensuring food safety by artificial intelligence-enhanced nanosensor arrays

Current analytical methods utilized for food safety inspection requires improvement in terms of their cost-efficiency, speed of detection, and ease of use. Sensor array technology has emerged as a food safety assessment method that applies multiple cross-reactive sensors to identify specific targets via pattern recognition. When the sensor arrays are fabricated with nanomaterials, the binding affinity of analytes to the sensors and the response of sensor arrays can be remarkably enhanced, thereby making the detection process more rapid, sensitive, and accurate. Data analysis is vital in converting the signals from sensor arrays into meaningful information regarding the analytes. As the sensor arrays can generate complex, high-dimensional data in response to analytes, they require the use of machine learning algorithms to reduce the dimensionality of the data to gain more reliable outcomes. Moreover, the advances in handheld smart devices have made it easier to read and analyze the sensor array signals, with the advantages of convenience, portability, and efficiency. While facing some challenges, the integration of artificial intelligence with nanosensor arrays holds promise for enhancing food safety monitoring.

N-Doping CQDs as an Efficient Fluorescence Probe Based on Dynamic Quenching for Determination of Copper Ions and Alcohol Sensing in Baijiu

To address an accurate detection of heavy metal ions in Baijiu production, a nitrogen-doping carbon quantum dots (N-CQDs) was prepared by hydrothermal method from citric acid and urea. The as-prepared N-CQDs had an average particle size of 2.74 nm, and a large number of functional groups (amino, carbonyl group, etc.) attached on its surface, which obtained a 9.6% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the fluorescence of N-CQDs at 380 nm excitation wavelength could be quenched quantitatively by adding Cu2+, due to the dynamic quenching of electron transfer caused by the binding of amine groups and Cu2+, which showed excellent sensitivity and selectivity to Cu2+ in the range of 0.5-5 μM with a detection limit (LOD) of 0.032 μM. In addition, the N-CQDs as well as could be applied to quantitative determine alcohol content in the range of 10-80 V/V% depending on the fluorescence enhancement. Upon the experiment, the fluorescent mechanism was studied by Molecular dynamics (MD) simulations, which demonstrated that solvent effect played an influential role on sensing alcohol content in Baijiu. Overall, the work provided a theoretically guide for the design of fluorescence sensors to monitor heavy metal ion in liquid drinks and sense alcohol content.

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

The regular and on-site monitoring of ions in drinking water is essential for safeguarding public health, ensuring high water quality, and preserving the ecological balance of aquatic ecosystems. Thus, developing a portable analytical device for the rapid, cost-effective, and visual on-site detection of multiple environmental pollutants is notably significant. In the present work, a novel ratiometric microfluidic paper-based analytical device (μPAD) was designed and developed for the simultaneous detection of Fe3+ and Cu2+ ions in water samples taking advantages from built-in masking zone. The μPAD was functionalized with a greenish-yellow fluorescent Zn-based metal-organic framework@tetracycline (FMOF-5@TC) nanocomposite, and the ratiometric design was based on the change in emission color from greenish yellow (FMOF-5@TC) to blue (FMOF-5). The μPAD consisted of one sample zone linked to two detection zones via two channels: the first channel was for the detection of both ions, while the second was intended for detecting only Cu2+ ions and comprised a built-in masking zone to remove Fe3+ ions prior to reaching the detection zone. The corresponding color changes were recorded with the aid of a smartphone and RGB calculations. The linear ranges were 0.1-80 μM for Cu2+ and 0.2-160 μM for Fe3+, with limits of detection of 0.027 and 0.019 μM, respectively. The simple μPAD design enabled the simultaneous detection of Cu2+ and Fe3+ ions in drinking water samples with excellent accuracy and precision, with spike recoveries of 81.28-96.36% and 83.01-102.33% for Cu2+ and Fe3+, respectively.

Highly Sensitive Ratiometric Fluorescent Flexible Sensor Based on the RhB@ZIF-8@PVDF Mixed-Matrix Membrane for Broad-Spectrum Antibiotic Detection

Antibiotics play an essential role in the treatment of various diseases. However, the overuse of antibiotics has led to the pollution of water bodies and food safety, affecting human health. Herein, we report a dual-emission MOF-based flexible sensor for the detection of antibiotics in water, which was prepared by first encapsulating rhodamine B (RhB) by a zeolite imidazolium ester skeleton (ZIF-8) and then blending it with polyvinylidene difluoride (PVDF). The luminescent properties, structural tunability, and flexible porosity of the MOF-based composites were combined with the processability and flexibility of polymers to prepare luminescent membranes. The sensor is capable of dual-emission ratiometric fluorescence sensing of nitrofurantoin (NFT) and oxytetracycline (OTC), exhibiting sensitive detection of fluorescence burst and fluorescence enhancement, respectively, with detection limits of 0.012 μM and 8.9 nM. With the advantages of visual detection, high sensitivity, short detection time, and simplicity, the highly sensitive ratiometric fluorescent flexible sensor has great potential for detecting antibiotics in an aqueous environment. It will further stimulate interest in luminescent MOF-based mixed matrix membranes and their sensing applications.

Low Cu(II) Concentration Detection Based on Fluorescent Detector Made from Citric Acid and Urea

Carbon quantum dots (CQD) are an advanced fluorescent material, which has attracted more and more attention in theoretical research and practical applications. To obtain stable CQDs with high fluorescence characteristics for detecting trace metal ions in water, nitrogen-doped carbon quantum dots (N-CQDs) based fluorescent sensors were synthesized by the hydrothermal method, using citric acid and urea as source. Transmission electron microscopy (TEM) images showed that the synthesized N-CQDs maintained a narrow particle size distribution bellow 10 nm, and its average size was 3.07 nm. Fourier transform infrared spectroscopy (FT-IR) indicated that abundant hydroxyl and carboxyl functional groups existed on N-CQDs surface, which helped N-CQDs highly disperse in water. In addition, UV-vis spectroscopy and photoluminescence demonstrated that the N-CQDs obtained a 10.27% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the N-CQDs showed a fluorescence "ON-OFF" mechanism during the Cu2+ detection, which was induced from the electrons transition in surface functional groups. The final N-CQDs exhibited a wide linear relationship between fluorescence response and concentration of Cu2+ in range of 0.3-0.7 μM with a detection limit of 0.071 μM. Furthermore, the detection of Cu2+ in the simulating surface water (by adding interfering metal ions in purified water) and the tap water (from municipal water in Beijing) were used to verify N-CQDs practical application.

CdTe-QDs Affect Reproductive Development of Plants through Oxidative Stress

With the continuous development of industry, an increasing number of nanomaterials are widely used. CdTe-QDs is a nanomaterial with good optical properties, but its release into the natural environment may pose a potential threat. The toxicity of nanoparticles in plants is beginning to be questioned, and the effect on phytotoxicity is unclear. In this study, we simulated air pollution and soil pollution (CdTe-QDs concentrations of 0, 0.2, 0.4, 0.8 mmol/L) by spraying and watering the seedlings, respectively. We determined the transport pathways of CdTe-QDs in Arabidopsis thaliana and their effects on plant reproductive growth. Spraying CdTe-QDs concentration >0.4 mmol/L significantly inhibited the formation of fruit and decreased the number of seeds. Observation with a laser confocal scanning microscope revealed that CdTe-QDs were mainly transported in plants through the vascular bundle, and spraying increased their accumulation in the anthers and ovaries. The expression level of genes associated with Cd stress was analyzed through RT-qPCR. CdTe-QDs significantly increased the expression levels of 10 oxidative stress-related genes and significantly decreased the expression levels of four cell-proliferation-related genes. Our results reveal for the first time the transport of CdTe-QDs in Arabidopsis flowers and demonstrate that QDs can cause abnormal pollen morphology, form defects of pollen vitality, and inhibit pollen tube growth in Arabidopsis through oxidative damage. These phenomena ultimately lead to the inability of Arabidopsis to complete the normal fertilization process and affect the reproductive growth of the plant.

A ratiometric fluorescence sensor based on gold silver nanoclusters and tungsten disulfide quantum dots with simple fabrication for the detection of copper ions in river water

Copper plays a key role in the human body; meanwhile, excess Cu²⁺ ions can result in various diseases. Nanoclusters (NCs) are often used to measure Cu²⁺ ions, but there are two difficulties. On the one hand, a single probe of NCs is easily affected by environmental factors. On the other hand, it is difficult to mask the interference of Pb²⁺ ions and Cd²⁺ ions in the process of detecting Cu²⁺ ions. As a new type of quantum dots (QDs), tungsten disulfide quantum dots (WS₂-QDs) have some advantages of simple synthesis and stable luminescence properties. Stable WS₂-QDs with blue fluorescence are used as a reference probe, while gold silver nanoclusters (AuAgNCs) with red fluorescence are used as a response probe. A ratiometric fluorescent sensor was constructed by mixing the two styles of fluorescent probes, which is abbreviated as NCs/QDs. This nano-sensor can be used to detect the concentration of Cu²⁺ ions, in which the fluorescence of QDs does not change significantly, while the fluorescence of NCs can be quenched by Cu²⁺ ions. The concentration of Cu²⁺ ions can be determined as low as 0.12 μM with a linear range from 0.3 to 3 μM. The common interference caused by Pb²⁺ and Cd²⁺ ions can be eliminated by the phosphate buffer solution (PBS). This sensor was used to detect the concentration of Cu²⁺ in river water with satisfactory results.

Discrimination of Chinese green tea according to tea polyphenols using fluorescence sensor array based on Tb (III) and Eu (III) doped Zr (IV) metal-organic frameworks

A facile and rapid fluorescence sensor array based on Tb (III) and Eu (III) doped Zr (IV) metal-organic frameworks was proposed for Chinese green tea discrimination. According to large porosity of Tb@UiO-66-(COOH)₂ and Eu@UiO-66-(COOH)₂, phenolic hydroxyl groups of tea polyphenols could coordinate with free carboxylic acid groups and was captured into the pores, which led to the disturbance of electronic structure of ligand and inhibited the energy transfer efficiency from ligand to Tb (III) and Eu (III) center, causing the fluorescence quenching effect. Based on Hierarchy Cluster Analysis and Linear Discrimination Analysis, the fluorescence sensor array was employed for successful tea polyphenols classification through the analysis of different fluorescence quenching effect to tea polyphenols. Green tea samples within different categories and grades were also successfully discriminated using this assay according to tea polyphenols, providing a new method for Chinese green tea identification.

The fabrication of N-doped carbon dots by methionine and their utility in sensing Cu2+ in real water

Copper ions (Cu²⁺) are ubiquitous in the ecosystem and cause serious environmental pollution, posing a threat to human health. Therefore, sensitive detection of Cu²⁺ is urgently needed. Herein, we employed a solvothermal method to prepare blue-emitting carbon dots (Met-CDs) using formamide (FA) and methionine (Met) as precursors, with a high quantum yield (QY) of 38%. Based on the good optical stability of Met-CDs and selective quenching by Cu²⁺, a sensitive probe using Met-CDs for the detection of Cu²⁺ in water was successfully designed. Within the linear range of 0.15-2 μM, the limit of detection (LOD) was determined to be as low as 47.7 nM, enabling the quantitative detection of Cu²⁺. Moreover, the recovery data of the spiked analysis of lake/river water samples were also satisfactory and verified the feasibility of the probe by the analysis of Cu²⁺ in natural conditions.

A Simple and Effective Visual Fluorescent Sensing Paper-Based Chip for the Ultrasensitive Detection of Mercury Ions in Environmental Water

Traces of mercury ions in environmental water can harm humans and animals. Paper-based visual detection methods have been widely developed for the rapid detection of mercury ions; however, existing methods are not sensitive enough to be used in real environments. Here, we developed a novel, simple and effective visual fluorescent sensing paper-based chip for the ultrasensitive detection of mercury ions in environmental water. CdTe-quantum-dots-modified silica nanospheres were firmly absorbed by and anchored to the fiber interspaces on the paper's surface to effectively avoid the unevenness caused by liquid evaporation. The fluorescence of quantum dots emitted at 525 nm can be selectively and efficiently quenched with mercury ions, and the ultrasensitive visual fluorescence sensing results attained using this principle can be captured using a smartphone camera. This method has a detection limit of 2.83 µg/L and a fast response time (90 s). We successfully achieved the trace spiking detection of seawater (from three regions), lake water, river water and tap water with recoveries in the range of 96.8-105.4% using this method. This method is effective, low-cost, user-friendly and has good prospects for commercial application. Additionally, the work is expected to be utilized in the automated big data collection of large numbers of environmental samples.

Semiconductor/Carbon Quantum Dot-based Hue Recognition Strategy for Point of Need Testing: A Review

The requirement to establish novel methods for visual detection is attracting attention in many application fields of analytical chemistry, such as, healthcare, environment, agriculture, and food. The research around subjects like "point-of-need", "hue recognition", "paper-based sensor", "fluorescent sensor", etc. has been always aimed at the opportunity to manufacture convenient and fast-response devices to be used by non-specialists. It is possible to achieve economic rationality and technical simplicity for optical sensing toward target analytes through introduction of fluorescent semiconductor/carbon quantum dot (QD) and paper-based substrates. In this Review, the mechanisms of anthropic visual recognition and fluorescent visual assays, characteristics of semiconductor/carbon QDs and ratiometric fluorescence test paper, and strategies of semiconductor/carbon QD-based hue recognition are described. We cover latest progress in the development and application of point-of-need sensors for visual detection, which is based on a semiconductor/carbon quantum dot-based hue recognition strategy generated by ratiometric fluorescence technology.

Ultra-small highly fluorescent zinc-based metal organic framework nanodots for ratiometric visual sensing of tetracycline based on aggregation induced emission

Color tonality by intrinsic fluorescent metal-organic frameworks (MOFs) is highly desirable in bioanalytical applications due to its stability, low-cost and robustness with no need for functionalization and/or encapsulation of fluorophores. In the present work, ultra-small and higly fluorescent zinc-based MOFs (FMOF-5) were synthesized. The prepared FMOFs were around 5 nm in size, and gave strong blue emission at 440 nm when excited at 350 nm. Interestingly, tetracycline (TC) selectively tuned the blue emission of FMOF-5 to greenish-yellow emission (520 nm) with dramatic enhancement through aggregation induced emission (AIE). The fluorimetric analysis of TC was carried out through the ratiometric peak intensities of F520/F440, with detection limit (LOD) of 5 nM. To realize quantitative point-of-care based on color tonality, a smartphone integrated with the ratiometric visual platform was thereby design. Hence, TC was visually detected with LOD of 10 nM. The prepared FMOF-5-based probe showed high stability (3 months) and reusability (∼10 times). The developed visual-based platform presents great promise for practical point of care testing due to its low-cost, robustness, ruggedness, simple operation, and excellent selectivity and repeatability.

Copper in grape and wine industry: Source, presence, impacts on production and human health, and removal methods

Heavy metals are of particular concern in grape and wine processing, especially copper. The sources of copper are diverse, including vineyard soil, copper-containing pesticides on the fruit surface, copper wine-making equipment, and exogenous addition in winemaking. Copper has potential risks to human nerves, metabolism, and others. It can inhibit yeast growth, delay fermentation, and also mediate oxidation reactions, which has a huge impact on the nutritional quality and sensory quality of fresh wine and aged wine. It is therefore crucial to detect, quantify, and remove copper from grapes and wine. However, the copper situations in the wine industries of various countries are complicated and diverse, and the existing forms of copper are quite different, which makes the research challenging. This review summarizes and analyzes the existence and influence of copper in the wine industry by analyzing the sources of, the current situation regarding, and the detection and removal methods for copper in wine. With the study, a better understanding of copper's impact on wine production will be gained, facilitating further control of copper in wine and helping the wine industry grow.

A microdots array-based fluoremetric assay with superwettability profile for simultaneous and separate analysis of iron and copper in red wine

A microdots array-based fluoremetric method with superwettability profile has been developed for the simultaneous and separate detection of Fe³⁺ and Cu²⁺ ions in red wine samples. A wettable micropores array was initially designed with high density by using polyacrylic acid (PAA) and hexadecyltrimethoxysilane (HDS), followed by the NaOH etching route. Zinc metal organic frameworks (Zn-MOFs) were fabricated as the fluorescent probes to be immobilized into the micropores array to obtain the fluoremetric microdots array platform. It was found that the fluorescence of Zn-MOFs probes could decrease significantly in the presence of Fe³⁺ and/or Cu²⁺ ions towards their simultaneous analysis. Yet, the specific responses to Fe³⁺ ions could be expected if using histidine to chelate Cu²⁺ ions. Moreover, the developed Zn-MOFs-based microdots array with superwettability profile can enable the accumulation of targeting ions from the complicated samples without any tedious pre-processing. Also, the cross-contamination of different samples droplets can be largely avoided so as to facilitate the analysis of multiple samples. Subsequently, the feasibility of simultaneous and separate detection of Fe³⁺ and Cu²⁺ ions in red wine samples was demonstrated. Such a design of microdots array-based detection platform may promise the wide applications in analyzing Fe³⁺ and/or Cu²⁺ ions in the fields of food safety, environmental monitoring, and medical diseases diagnostics.

Machine Learning System To Monitor Hg2+ and Sulfide Using a Polychromatic Fluorescence-Colorimetric Paper Sensor

An optical monitoring device combining a smartphone with a polychromatic ratiometric fluorescence-colorimetric paper sensor was developed to detect Hg2+ and S2- in water and seafood. This monitoring included the detection of food deterioration and was made possible by processing the sensing data with a machine learning algorithm. The polychromatic fluorescence sensor was composed of blue fluorescent carbon quantum dots (CDs) (BU-CDs) and green and red fluorescent CdZnTe quantum dots (QDs) (named GN-QDs and RD-QDs, respectively). The experimental results and density functional theory (DFT) prove that the incorporation of Zn can improve the stability and quantum yield of CdZnTe QDs. According to the dynamic and static quenching mechanisms, GN-QDs and RD-QDs were quenched by Hg2+ and sulfide, respectively, but BU-CDs were not sensitive to them. The system colors change from green to red to blue as the concentration of the two detectors rises, and the limits of detection (LOD) were 0.002 and 1.488 μM, respectively. Meanwhile, the probe was combined with the hydrogel to construct a visual sensing intelligent test strip, which realized the monitoring of food freshness. In addition, a smartphone device assisted by multiple machine learning methods was used to text Hg2+ and sulfide in real samples. It can be concluded that the fabulous stability, sensitivity, and practicality exhibited by this sensing mechanism give it unlimited potential for assessing the contents of toxic and hazardous substances Hg2+ and sulfide.

Selective recognition of Hg2+ ions in aqueous solution by a CdII-based metal-organic framework with good stability and vacant coordination sites

A novel water-stable Cd^II-based metal-organic framework, namely {[Cd(BIBT)(TDC)]·2H₂O}_n (JXUST-28, BIBT = 4,7-bi(1H-imidazol-1-yl)benzo-[2,1,3]thiadiazole and H₂TDC = 2,5-thiophenedicarboxylic acid), was synthesized using a mixed-ligand strategy. Structural analysis demonstrates that JXUST-28 exhibits a two-dimensional layer structure with 4-connected sql topology. Intriguingly, JXUST-28 presents good stability in boiling water (at least 5 days), common organic solvents and aqueous solutions with different pH values of 2-12 (more than 24 hours). Furthermore, fluorescence experiments revealed that JXUST-28 could sense Hg²⁺ ions in aqueous solution via a quenching effect with a detection limit of 0.097 μM. Meanwhile, JXUST-28 can also be regenerated at least 5 times to detect Hg²⁺ ions. In addition, light-emitting diode lamps, luminescent films, and test papers of JXUST-28 have been successfully developed for practical applications.

A smartphone-assisted down/up-conversion dual-mode ratiometric fluorescence sensor for visual detection of mercury ions and l-penicillamine

Establishment of a rapid, sensitive, visual, accurate and low-cost fluorescence detection system to detect multiple targets was of great significance in food safety evaluation, ecological environment monitoring and human health monitoring. In this work, a smartphone-assisted down/up-conversion dual-mode ratiometric fluorescence sensor was proposed based on metal-organic framework (NH₂-MIL-101(Fe)) and CdTe quantum dots (CdTe QDs) for visual detection of mercury ions (Hg²⁺) and L-penicillamine (L-PA), in which NH₂-MIL-101(Fe) was used as the reference signal and CdTe QDs was used as the response signal. The down-conversion fluorescence system at excitation wavelength of 300 nm (ex: 330 nm) was used to detect Hg²⁺ and L-PA, in which the detection limit of Hg²⁺ was 0.053 nM with the fluorescence color changed from green to blue, and the detection limit of L-PA was 1.10 nM with the fluorescence color changed from blue to green. Meanwhile, the up-conversion fluorescence system at excitation wavelength of 700 nm (ex: 700 nm) was used to detect Hg²⁺ and L-PA. The detection limits of Hg²⁺ and L-PA were 0.11 nM and 2.93 nM, respectively. The detection of Hg²⁺ and L-PA were also carried out based on the color extraction RGB values identified by the smartphone with a detection limit of 0.091 nM for Hg²⁺ and 8.97 nM for L-PA. In addition, the concentrations of Hg²⁺ and L-PA were evaluated by three-dimensional dynamic analysis in complex environments. The smartphone-assisted down/up-conversion dual-mode ratiometric fluorescence sensor system provides a new strategy for detection Hg²⁺ and L-PA in food safety evaluation, environmental monitoring and human health monitoring.

Catalytic nanozyme Zn/Cl-doped carbon quantum dots as ratiometric fluorescent probe for sequential on-off-on detection of riboflavin, Cu2+ and thiamine

A novel metal-doped Zn/Cl carbon quantum dots (Zn/Cl-CQDs) was developed successfully as ratiometric fluorescent probes for the sequential on-off-on detection of riboflavin, Cu²⁺ ion and thiamine. The excellent catalytic performance of the Zn/Cl-CQDs nanozyme serves as an ideal platform for sensitive detection of thiamine. Due to the addition of riboflavin to the Zn/Cl-CQDs, the blue emission peak of Zn/Cl-CQDs at 440 nm remains unaffected and used as an internal reference approach, while the green emission peak of riboflavin at 520 nm appeared and increased remarkably. Following the presence of Cu²⁺, a quenching blue fluorescence signal of Zn/Cl-CQDs was observed which resulted in consequent fluorescent 'turn-off' response toward Cu²⁺ ion. Finally, upon the addition of thiamine to the above solution under alkaline condition, the blue emission of Zn/Cl-CQDs was gradually recovered. The prepared Zn/Cl-CQDs could act as a nanozyme catalyst for directly catalyzing the oxidation of non-fluorescent substrate of thiamine to produce highly fluorescent substrate of thiochrome. As a result, the blue fluorescence emission peak at 440 nm was recovered. Eventually, the sequential detection properties of ratiometric probes for riboflavin, Cu²⁺ ion and thiamine were successfully applied in VB2 tablets, drinking water and VB1 tablet with good recoveries of 96.21%, 98.25% and 98.44%, respectively.

One-pot synthesis of copper nanocluster/Tb-MOF composites for the ratiometric fluorescence detection of Cu2

The increasing degradation of ecosystems due to heavy metal residues has led to environment and food contamination, prompting the development of convenient platforms for monitoring heavy metals. Here, a new dual-emission fluorescent sensor CuNCs@Tb@UiO-66-(COOH)₂ for the detection of copper ions (Cu²⁺ ) has been synthesized by one-pot encapsulation of Tb (III) and glutathione-stabilized copper nanoclusters (CuNCs) into metal-organic frameworks (MOFs) UiO-66-(COOH)₂ . In this ratiometric sensor, the fluorescence intensity of Tb³⁺ decreased significantly upon the addition of Cu²⁺ , while that of CuNCs showed good stability, together with an apparent color change. Therefore, ratiometric fluorescence detection of Cu²⁺ can be accomplished by measuring the ratio of the fluorescence intensity at the 450 nm (F₄₅₀ ) wavelength of CuNCs to the 548 nm (F₅₄₈ ) emission of Tb³⁺ in the fluorescence spectra of the CuNCs@Tb@UiO-66-(COOH)₂ suspension. Moreover, the obtained fluorescent probe shows good results in the detection of actual samples. This work can provide the basis of method for the exploration of ratiometric fluorescence and visual sensors of trace pollutants analysis in complicated samples.

Ratiometric fluorescence sensing with logical operation: Theory, design and applications

The construction of ratiometric fluorescence sensing logic systems has gradually become a hot topic in fluorescence analysis, due to the multi-target analysis potential of logic operations and the high specificity and selectivity of ratiometric fluorescence sensing. In this paper, the basic principles of various logic functions implemented in ratiometric fluorescence detection are discussed in the context of sensing mechanisms, and the strategies for constructing logic systems in different ratiometric fluorescence sensing application areas are summarized. Although there are limitations such as cumbersome operations and complicated experiments, ratiometric fluorescence sensing logic circuits that combine the visualization of logic operations and the accuracy of ratiometric fluorescence are still worthy of in-depth study. This review may be useful for researchers interested in the construction of logic operations based on ratiometric fluorescence sensing applications.

A gel fluorescence sensor based on CDs@SiO2/FeS2@MIPs for the visual detection of p-chlorophenol

There is a critical need for the rapid detection of p-chlorophenol produced by pesticide abuse and industrial wastewater discharge, which has been an urgent problem in the realm of environmental protection. Here, a green and environmentally friendly method was developed to prepare stable and low toxicity quantum dots. First, blue-green fluorescent FeS₂ quantum dots (B-FeS₂ QDs) were prepared with FeCl₃·6H₂O (an iron source) and L-cysteine (a capping agent) by the solvothermal method. By combining B-FeS₂ QDs with orange carbon dots (O-CDs), a CDs@SiO₂/FeS₂@MIPs visual fluorescence sensor for the selective detection of p-chlorophenol was constructed. Under optimum conditions, this sensor exhibited a detection limit of 1.265 μM with a linear range of 5.00-50.00 μM and was successfully applied to detect p-chlorophenol in real samples. Moreover, this sensor was successfully applied to visual semi-quantitative detection of p-chlorophenol. This work demonstrated that these sensors, based on FeS₂ QDs and CDs, had potentials for in situ and visual detection of environmental contaminants.

Methyl viologen induced fluorescence quenching of CdTe quantum dots for highly sensitive and selective "off-on" sensing of ascorbic acid through redox reaction

A turn-on fluorescent sensor based on CdTe quantum dots (QDs) is designed for highly sensitive and selective ascorbic acid (AA) detection. CdTe shows a strong emission centered at 578 nm. When assembled with poly(sodium 4-styrenesulfonate) (PSS) and methyl viologen (Mv²⁺) through electrostatic interaction, the emission is found to be effectively quenched. In the presence of AA, Mv²⁺ is reduced to Mv⁺, making the fluorescence of CdTe QDs restored. Under the optimal conditions, the proposed AA sensing method shows a linear proportional response from 0.8 µM to 20 µM, with the detecting limit as low as 50 nM. The developed method was successfully applied in the analysis of AA in human serum samples and cell lysates with satisfactory results.

Ratiometric fluorescent nanoprobes based on carbon dots and multicolor CdTe quantum dots for multiplexed determination of heavy metal ions

Owing to the high risk to human and environmental health, heavy metal pollution has become a global problem. Rapid, accurate and multiplexed determination of heavy metal ions is critical. In this work, we reported a promising approach to designing ratiometric fluorescent nanoprobes for multiplexed determination of Hg²⁺, Cu²⁺, and Ag⁺ ions. The nanoprobes (CDs-QDx) were designed by mixing the CDs and multicolor CdTe QDs without the involvement of recognition elements. The CDs were insensitive to heavy metal ions while CdTe QDs showed the size-dependent fluorescence response to different heavy metal ions, thereby establishing a ratiometric detection scheme by measuring the fluorescence intensity ratios of CDs-QDx systems. By evaluating the detection performance, the CDs-QDx (x = 570, 650, and 702) were successfully used for differentiation and quantification of Hg²⁺, Cu²⁺, and Ag⁺ ions. In addition, we also carried out the detection of heavy metal ions in actual samples with acceptable results. We believed that this work offers new insight into the design of ratiometric fluorescent nanoprobe for multiplexed determination of not only heavy metals but also some other analytes by combining the CDs with CdTe QDs with fine-tuned sizes.

Self-assembled nanoplatforms with ZIF-8 as a framework for FRET-based glutathione sensing in biological samples

A nanoprobe was constructed by embedding QDs and a rhodamine B derivative (RBD) into ZIF-8. Then, the ultraviolet absorption of RBD that reacted with glutathione can overlap with the emission spectrum of the QDs, causing FRET-based glutathione sensing.

Bio-inspired Track-Etched Polymeric Nanochannels: Steady-State Biosensors for Detection of Analytes

Bio-inspired polymeric nanochannel (also referred as nanopore)-based biosensors have attracted considerable attention on account of their controllable channel size and shape, multi-functional surface chemistry, unique ionic transport properties, and good robustness for applications. There are already very informative reviews on the latest developments in solid-state artificial nanochannel-based biosensors, however, which concentrated on the resistive-pulse sensing-based sensors for practical applications. The steady-state sensing-based nanochannel biosensors, in principle, have significant advantages over their counterparts in term of high sensitivity, fast response, target analytes with no size limit, and extensive suitable range. Furthermore, among the diverse materials, nanochannels based on polymeric materials perform outstandingly, due to flexible fabrication and wide application. This compressive Review summarizes the recent advances in bio-inspired polymeric nanochannels as sensing platforms for detection of important analytes in living organisms, to meet the high demand for high-performance biosensors for analysis of target analytes, and the potential for development of smart sensing devices. In the future, research efforts can be focused on transport mechanisms in the field of steady-state or resistive-pulse nanochannel-based sensors and on developing precisely size-controlled, robust, miniature and reusable, multi-functional, and high-throughput biosensors for practical applications. Future efforts should aim at a deeper understanding of the principles at the molecular level and incorporating these diverse pore architectures into homogeneous and defect-free multi-channel membrane systems. With the rapid advancement of nanoscience and biotechnology, we believe that many more achievements in nanochannel-based biosensors could be achieved in the near future, serving people in a better way.

Development of QDs-based nanosensors for heavy metal detection: A review on transducer principles and in-situ detection

Heavy metal pollution has severe threats to the ecological environment and human health. Thus, it is urgent to achieve the rapid, selective, sensitive and portable detection of heavy metal ions. To overcome the defects of traditional methods such as time-consuming, low sensitivity, high cost and complicated operation, QDs (Quantum dots)-based nanomaterials have been used in sensors to significantly improve the sensing performance. Due to their excellent physicochemical properties, high specific surface area, high adsorption and reactive capacity, nanomaterials could act as potential probes or offer enhanced sensitivity and create a promising nanosensors platform. In this review, the rapidly advancing types of QDs for heavy metal ions detection are first summarized. Modified with ligands, nanomaterials, or biomaterials, QDs are assembled on sensors by the interaction of electrostatic adsorption, chemical bonding, steric hindrance, and base-pairing. The stability of QDs-based nanosensors is improved by doping the elements to QDs, providing the reference substance, optimizing the assemble strategies and so on. Then, according to transducer principles, the two most typical sensor categories based on QDs: optical and electrochemical sensors are highlighted to be discussed. In the meanwhile, portable devices combining with QDs to adapt the practical detection in complex situations are summarized. The deficiencies and future challenges of QDs in toxicity, specificity, portability, multi-metal co-detection and degradation during the detection are also pointed out. In the end, the development trends of QDs-based nanosensors for heavy metal ions detection are discussed. This review presents an overall understanding, recent advances, current challenges and future outlook of QDs-based nanosensors for heavy metal detection.

Assaying of Cu2+ with near-infrared l-cysteine-capped CdSeTe/CdS quantum dots and its effect on cell imaging

Near-infrared (NIR) core-shell CdSeTe/CdS quantum dots (QDs) modified with l-cysteine were synthesized in aqueous solution. The QDs had a special NIR-emitting spectrum, high fluorescence stability and low cytotoxicity. In addition, they exhibited an obvious fluorescence quenching when Cu²⁺ was present. An NIR nanosensor was prepared for rapidly, sensitively, and selectively determining Cu²⁺ in solution quantitatively and monitoring the changes in Cu²⁺ in cells with fluorescence imaging in a semiquantitative way. The linear relationship between the relative fluorescence intensity (F₀ /F) and the concentration of Cu²⁺ from 5.12 × 10^-8  M to 2.56 × 10^-5  M in solution was observed using an NIR fluorescence spectrophotometer with R² equal to 0.9958. Moreover, in the experiment with the fluorescence microscope, F₀ /F versus the concentration of Cu²⁺ from 5.00 × 10^-8  M to 7.68 × 10^-6  M also showed a good linear relationship with R² equal to 0.9817. Practical water sample ion detecting experiments had good accuracy and recovery rates. Cell experiments showed that the NIR imaging intensity of cells was inversely proportional to the concentration of copper ions, therefore NIR QDs have great potential for detection of metal ions in solution and in cells.

Progress in Metal-Organic Frameworks Facilitated Mercury Detection and Removal

Metal Organic Frameworks (MOFs) are noted as exceptional candidates towards the detection and removal of specific analytes. MOFs were reported in particular for the detection/removal of environmental contaminants, such as heavy metal ions, toxic anions, hazardous gases, explosives, etc. Among heavy metal ions, mercury has been noted as a global hazard because of its high toxicity in the elemental (Hg0), divalent cationic (Hg2+), and methyl mercury (CH3Hg+) forms. To secure the environment and living organisms, many countries have imposed stringent regulations to monitor mercury at all costs. Regarding the detection/removal requirements of mercury, researchers have proposed and reported all kinds of MOFs-based luminescent/non-luminescent probes towards mercury. This review provides valuable information about the MOFs which have been engaged in detection and removal of elemental mercury and Hg2+ ions. Moreover, the involved mechanisms or adsorption isotherms related to sensors or removal studies are clarified for the readers. Finally, advantages and limitations of MOFs in mercury detection/removal are described together with future scopes.

Encapsulation of Luminescent Guests to Construct Luminescent Metal-Organic Frameworks for Chemical Sensing

Metal-organic frameworks (MOFs), which are a class of coordination polymers constructed by metal ions or clusters with organic ligands, have emerged as exciting inorganic-organic hybrid materials with the superiorities of inherent crystallinity, adjustable pore size, clear structure, and high degree of functionalization. The MOFs have attracted much attention to develop good luminescent functional materials due to their inherent luminescent centers of both inorganic and organic photonic units. Furthermore, the pores within MOFs can also be used to encapsulate a large number of luminescent guest species, which provides a broader luminescent property for MOF materials. MOFs possess the incomparable multifunctional advantages of inorganic and organic luminescent materials. A large number of luminescent MOFs (LMOFs) have been synthesized for applications in sensing, white-light-emitting diodes (LED), photocatalysis, biomedicine, etc. This paper reviews the encapsulation of various luminescent guests such as lanthanide ions, dyes, quantum dots, and luminescent complexes in metal-organic frameworks to construct luminous sensors with single- or double-emission centers, as well as the research progress of these sensors in chemical sensing. Finally, the challenges in these fields were outlined and the prospects for future development were put forward.

A reusable AuNPS with increased stability applied for fast screening of trace heavy metals in edible and medicinal marine products

Heavy metal pollution in marine environment poses a severe threat to the safety of marine products and is thus causing increasingly concerns in terms of their toxicity and potential health risks pose to human. Due to the complex matrix of marine products, a fast screening method for heavy metals at trace level with low price, reusability, high accuracy and long lifetime is of urgency and necessity for consumers and processing factories. This work described a simplified screening system through the preparation, characterization and particular application of Au nano particle sensor (AuNPS) in the complex marine matrix, the main aim is to significantly increase the stability, sensitivity and lifetime of detection system dedicated to Cu and Hg trace analysis in marine products. It is worth mentioning that, the proposed screening system was characterized through electrochemical experiments and theoretical calculations, which could be a new evidence for selecting the detection system in commercially complex samples. Importantly, the discipline of deposition and oxidative stripping process on AuNPS was explained based on the mechanism of Metal Ion Deficient Layer (MIDL), and illustrated with SEM changes during stripping process, as well as the dissolving-out rate of metals on AuNPS material. Moreover, to further improve the reusability and stability of AuNPS sensor, the complex marine matrix was purified by pre-plating interferences on indium tin oxide glass electrode. The screening system exhibited a liner response in the range of 0.02-0.10 μg mL^-1 for Hg, 0.01-0.10 μg mL^-1 and 0.001-0.01 μg mL^-1 for Cu with the detection limits of 0.138 mg kg^-1 and 1.51 mg kg^-1 in marine matrix, respectively. The sensitivity and lifetime was at least two times better as compared to similar works even after 20-times use. Finally, this proposed analysis system combined with purification procedure was successfully applied for the edible and medicinal marine products analysis, meanwhile, the accuracy and stability were confirmed with standard analytical methods.

Silver ion-doped CdTe quantum dots as fluorescent probe for Hg2+ detection

Mercury(ii), which is a well-known toxic species, exists in the industrial waste water in many cases. In the present work, CdTe quantum dots (QDs) are studied as a fluorescence probe for Hg²⁺ detection. Ag ions are induced to QDs to enlarge their detection concentration range. l-cysteine is employed in the QD-based fluorescence probe to connect QDs with Hg²⁺. X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy results indicate the formation of zinc blende CdTe QDs with sizes of ∼5 nm and the existence of Ag⁺ in crystalline CdTe. Photoluminescence (PL) spectra and PL decay spectra were acquired to investigate the emission mechanism of Ag-doped CdTe QDs, revealing multi-emission in QD samples with higher concentrations of Ag⁺ doping. The highest PL quantum yield of the QD samples was 59.4%. Furthermore, the relationship between the fluorescence intensity and the concentration of Hg²⁺ has been established. Two linear relationships were obtained for the plot of F/F₀ against Hg²⁺ concentration, enlarging the detection concentration range of Hg²⁺.

Ag-doped CdTe QDs emit multiple-fluorescence peaks, and the relationship between fluorescence intensity and the concentration of Hg²⁺ is established. Two linear relationships are obtained, which is benefit to the extension of detection range.