Double-enzymes-mediated fluorescent assay for sensitive determination of organophosphorus pesticides based on the quenching of upconversion nanoparticles by Fe3

Sensitive detection of choline and nicotine in real samples by switching upconversion luminescence

Nicotine (3-(1-methyl-2-pyrrolidinyl)pyridine) is one of the most common addictive substances, causing the trace detection of nicotine to be very necessary. Herein, we designed and prepared a functionalized nanocomposite CS-PAA (NaYF4:19.5%Yb,0.5%Tm@NaYF4-PAA) using a simple method. The nicotine concentration was quantitatively detected through the inhibition of choline oxidase activity by nicotine and the luminescence intensity of CS-PAA being quenched by Fe3+. The mechanism of Fe3+ quenching CS-PAA emission was inferred by luminescence lifetime and UV-vis absorption spectra characterization. During the nicotine detection, both excitation (980 nm) and emission (802 nm) wavelengths of CS-PAA enable the avoidance of the interference of background fluorescence in complicated food objects, thus providing high selectivity and sensitivity with a linear range of 5-750 ng/mL and a limit of detection of 9.3 nM. The method exhibits an excellent recovery and relative standard deviation, indicating high accuracy and repeatability of the detection of nicotine.

Gold-copper-doped lanthanide luminescent metal-organic backbone induced self-enhanced molecularly imprinted ECL sensors for ultra-sensitive detection of chlorpyrifos

Herein, a self-enhanced molecularly imprinted polymer luminescence (MIP-ECL) sensing platform based on gold-copper doped Tb-MOFs (Au@Cu:Tb-MOFs) was constructed for ultra-sensitive detection of chlorpyrifos (CPF). In this work, Au@Cu:Tb-MOFs as co-reaction promoters greatly improve the ECL emission signal, while Au@Cu:Tb-MOFs were used as cathode emitters. And chlorpyrifos and 4,7-bis(thiophene-2-yl)benzo [c][1,2,5] thiadiazole were electropolymerized on electrode surface to form MIP, where this films with thiophene derivatives could greatly improve ECL signal. Notably, the introduction of MIP as recognition elements enabled specific identification of target analytes, in which molecular docking technique validated target analyte and functional monomers are tightly bound through Pi-alkyl interaction. As the concentration of CPF increases, the ECL signal gradually decreases, showing a good linear relationship in the range of 0.1-106 pg/mL with a low detection limit (LOD) of 0.029 pg/mL. Moreover, actual sample testing experiment of this method displayed a special correlation in organophosphorus detection and development potential in actual sample analysis.

Self-ratiometric fluorescent platform based on upconversion nanoparticles for on-site detection of chlorpyrifos

Monitoring organophosphorus pesticides is significant for food safety assessment. Herein, we developed upconversion nanoparticles (UCNPs)-based self-ratiometric fluorescent platform for the detection of chlorpyrifos. The UCNPs have the ability to confine the detection and reference functions in one nanoparticle. Specifically, the blue upconversion (UC) emission (448 nm) in the shell layer of UCNPs is quenched by the product of the acetylcholinesterase-mediated reaction, while the red UC emission (652 nm) from the core remains constant as a self-calibrated reference signal. Employing the inhibition property of chlorpyrifos, self-proportional fluorescence is employed to detect chlorpyrifos. As proof-of-concept, test strips are fabricated by loading the UCNPs onto filter paper. Combined with the smartphone and image-processing algorithm, chlorpyrifos quantitative testing is achieved with a detection limit of 14.4843 ng mL-1. This portable platform displays anti-interference capability and high stability in the complicated matrix, making it an effective candidate for on-site application.

Inner filter effect-based upconversion nanosensor for rapid detection of thiram pesticides using upconversion nanoparticles and dithizone-cadmium complexes

Herein, we propose a method for detecting thiram based on the fluorescence inner filter effect using upconversion nanoparticles and dithizone-cadmium complexes (DZ-Cd2+). The ultraviolet absorption of DZ-Cd2+ was in the range of 480-600 nm under alkaline conditions, resulting in fluorescence quenching of the nanoparticles at 540 nm. Thiram had a stronger coordination effect with Cd2+ than dithizone; thus, more thiram-cadmium complex (T-Cd2+) formed when thiram was added, leading to fluorescence recovery at 540 nm. The standard thiram curve was found to have a detection limit of 6.75 ng/mL in the linear range of 0.01-1000 µg/mL. In addition, high-performance liquid chromatography results for detecting thiram in apple samples revealed good application performance. The results demonstrate that the developed method has great potential to detect thiram residues in food.

Electrochemiluminescence enhanced by isolating ACQphores in imine-linked covalent organic framework for organophosphorus pesticide assay

Most of covalent organic frameworks (COFs) are non or weakly emissive due to either the molecular thermal motion-mediated energy dissipation or the aggregation-caused quenching (ACQ) effect. Herein, we synthesize an imine-linked COF (TFPPy-TPh-COF) with high electrochemiluminescence (ECL) emission and the capability of eliminating the ACQ effect and further construct an ECL sensor for malathion detection. The imine-linked COF is obtained by the condensation reaction of (1,1':3',1″-terphenyl)-4,4″-diamine (TPh) and 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPPy), and it has higher ECL efficiency than TFPPy aggregates due to the separation of ACQ luminophores (i.e., TFPPy) from each other by TPh and the restriction of intramolecular motions of TFPPy and TPh to reduce the nonradiative decay. The efficient quenching of ECL is achieved by electrochemiluminescence resonance energy transfer (ERET) from the excited state of the TFPPy-TPh-COF to zeolite imidazolate framework-8 (ZIF-8) and the steric hindrance of ZIF-8. Acetylcholinesterase (AChE) can enzymatically hydrolyze acetylcholine (ACh) to generate acetic acid. The resultant acetic acid can trigger the dissolution of ZIF-8 to produce an enhanced ECL signal. Malathion as an organophosphorus pesticide serves as an AChE inhibitor to prevent the production of acetic acid, inducing the decrease of ECL signal. This sensor displays a limit of detection (LOD) of 2.44 pg/mL and a wide dynamic detection range of 0.01-1000 ng/mL. Furthermore, it can be used to detect other organophosphates pesticides (e.g., methidathion, chlorpyrifos, and paraoxon) and measure malathion in real samples (i.e., pakchoi, lettuce, and apples).

Enzyme-mediated Ru@UiO-66@MnO2 NSs/thiamine-based ratiometric fluorescence sensor for visual detection of organophosphorus pesticide residues

In view of the potential hazards of organophosphorus pesticides (OPs), this paper constructed a ratiometric fluorescent probe utilizing a functionalized metal-organic framework to detect OPs. Ru(bpy)3Cl2 was encapsulated inside UiO-66 as a reference signal, and MnO2 nanosheets (MnO2 NSs) were grown on the surface to obtain Ru@UiO-66@MnO2 NSs. Acetylcholinesterase catalyzed the decomposition of acetylcholine into reductive thiocholine, which consumed MnO2 NSs, thus restoring the Ru@UiO-66 fluorescence. Due to the enzymatic inhibition of OPs and the redox reaction between MnO2 NSs and thiamine, this probe emitted blue fluorescence in the presence of OPs. The probe achieved linear responses to dichlorvos and chlorpyrifos with LODs of 9.99 × 10-6 μg mL-1 and 9.99 × 10-5 μg mL-1. The probe exhibited a satisfactory recovery rate for OPs in green tea. Furthermore, a hydrogel detection platform was developed by embedding the probe into sodium alginate. Overall, this work provides a visual approach to detect OPs in agricultural products.

T4PPVB-COP composite-driven innovative electrochemiluminescence aptasensor for ultra-sensitive detection of chlorpyrifos

Herein, an enhanced electrochemiluminescence (ECL) aptasensor driven by a complex (T4PPVB-COP@CdS QDs) with large specific surface area and high stability was constructed for highly sensitive detection of chlorpyrifos (CPF), using electrostatic interactions and signal amplification techniques. In the presence of CPF, the specific binding between the aptamer and CPF caused partial detachment of the aptamer from the sensor, thus restoring the ECL signal. Notably, gold nanoparticles functionalized with streptavidin (SA) as signal enhancers further amplified the ECL signal in specific interactions with aptamers, thereby improving the sensitivity of the assay. Based on this, the proposed ECL aptasensor demonstrated significant detection performance for CPF with a linear range of 1-107 pg/mL and a LOD of 0.34 pg/mL. Furthermore, the feasibility of the ECL aptasensor was validated by the detection and analysis of CPF in real samples, which also provided a broad reference value for bioanalysis.

Ultrasensitive Fluorescence Platform Based on AgNPs In Situ-Incorporated Zr-MOFs for the Detection of Organophosphorus Pesticides

Organophosphorus pesticides (OPPs) are extensively used in agricultural production, and the contamination caused by their residues has raised significant concerns regarding potential threats to human health. Herein, a novel fluorescence nanoprobe based on an enzyme-mediated silver nanoparticle-modified metal organic framework (AgNPs@PCN-224) was successfully prepared for the rapid detection of OPPs. Initially, AgNPs@PCN-224 were synthesized by reducing silver nitrate (AgNO3) using sodium borohydride (NaBH4) embedded into luminescent PCN-224. This triggered the inner filter effect, leading to fluorescence quenching. Meanwhile, under the catalysis of acetylcholinesterase (AChE) and choline oxidase (CHO), acetylcholine (ATCh) was decomposed to hydrogen peroxide (H2O2), which could destroy AgNPs to form Ag+ released from PCN-224 for fluorescence recovery. Instead, fenitrothion, an OPP, inhibited AChE activity, allowing the quenched fluorescence to be reactivated. Under the current optimum conditions, the fluorescence intensity had a good correlation (Y = -728.5370X + 2178.4248, R2 = 0.9869) over a dynamic range of fenitrothion concentrations from 0.1 to 500 ng/mL, with an LOD of 0.037 ng/mL. In addition, the anti-interference ability and robustness of the proposed sensor was verified for the monitoring of fenitrothion in tea with recoveries of 87.67-103.72% and the relative standard deviations (RSD) < 5.43%, indicating that the system has excellent prospects for OPP determination in practical applications. Furthermore, this work provides a universal platform for screening other enzyme inhibitors to detect OPPs.

Recent advances in rare earth ion-doped upconversion nanomaterials: From design to their applications in food safety analysis

The misuse of chemicals in agricultural systems and food production leads to an increase in contaminants in food, which ultimately has adverse effects on human health. This situation has prompted a demand for sophisticated detection technologies with rapid and sensitive features, as concerns over food safety and quality have grown around the globe. The rare earth ion-doped upconversion nanoparticle (UCNP)-based sensor has emerged as an innovative and promising approach for detecting and analyzing food contaminants due to its superior photophysical properties, including low autofluorescence background, deep penetration of light, low toxicity, and minimal photodamage to the biological samples. The aim of this review was to discuss an outline of the applications of UCNPs to detect contaminants in food matrices, with particular attention on the determination of heavy metals, pesticides, pathogenic bacteria, mycotoxins, and antibiotics. The review briefly discusses the mechanism of upconversion (UC) luminescence, the synthesis, modification, functionality of UCNPs, as well as the detection principles for the design of UC biosensors. Furthermore, because current UCNP research on food safety detection is still at an early stage, this review identifies several bottlenecks that must be overcome in UCNPs and discusses the future prospects for its application in the field of food analysis.

Dual-mode supramolecular fluorescent probe for rapid and on-site detection of chlorpyrifos in the environment

Chlorpyrifos (CPF) as a classic organophosphorus pesticide has been widely used in agricultural applications to control insects and worms. CPF in the environment can cause deaths of diverse kinds of aquatic organism and bring a high risk to human health. Therefore, the development of effective analytical method for CPF is of great importance. In this work, a novel dual-mode albumin (ALB)-based supramolecular probe FD@ALB was designed and prepared for rapid detection of CPF in the environment. The limit of detection is 0.57 μM (∼ 0.2 ppm) with a wider detection range up to 200 μM, which is satisfactory for application. The sensing mechanism can be ascribed to CPF-induced phosphorylation of ALB, thus leading to a change in the binding microenvironment of FD dye. Moreover, the paper-based test strips were used in conjunction with the FD@ALB, realizing the portable detection of CPF. This method was demonstrated to be suitable for on-site detection of CPF in various kinds of environmental samples, including water, soil, and food samples, with the aid of a smartphone. To the best of our knowledge, this is the first analytical method achieving a combination of the rapid and ratiometric detection of CPF in the environment.

Near-infrared-excitable acetylcholinesterase-activated fluorescent probe for sensitive and anti-interference detection of pesticides in colored food

The development of a common and anti-interference acetylcholinesterase (AChE) inhibition assay for plant-originated food samples has been of great challenge because of the prevalent and strong signal interferences from natural pigments. Plant pigments normally exhibit non-negligible absorbance in the UV-visible region. As a result, the signals of a typical near-infrared (NIR) fluorescent probe could be disturbed through primary inner filter effect if it is excited by UV-visible light during plant sample analysis. In this work, an NIR-excitable AChE-activated fluorescent probe was biomimetically designed and synthesized. And the NIR-excitation strategy was utilized for the anti-interference detection of organophosphate and carbamate pesticides in colored samples with this probe. Sensitive and rapid response to AChE and pesticides was achieved due to the high affinity of the biomimetic recognition unit in the probe. The limits of detection for four representative pesticides including dichlorvos, carbofuran, chlorpyrifos and methamidophos reached 0.0186 μg/L, 2.20 μg/L, 12.3 μg/L and 13.6 μg/L, respectively. Most importantly, fluorescent response to pesticide contents could be accurately measured in the coexistence of different plant pigments by this probe, and the measured results showed completely irrelevance to the plant pigments and their colors. Taking advantage of such probe, the new developed AChE inhibition assay showed good sensitivity and anti-interference ability in the detection of organophosphate and carbamate pesticides in real samples.

Two-Dimensional Printed AgNPs@Paper Swab for SERS Screening of Pesticide Residues on Apples and Pears

In recent years, growing food safety and quality concerns have emerged and created an urgent need for the development of rapid and reliable food control technologies. This study proposes a novel surface-enhanced Raman spectroscopy (SERS) substrate printing technology that utilizes commercial filter paper functionalized by silver nanoparticles. We modified the Automatic TLC Sampler using a two-dimensional (2D) printer. The modification allows for various sampling modes which can be applied to 2D printing. The shape and size of nano silver on the substrate were determined, and the substrate sensitivity, uniformity, and stability were evaluated. As demonstrated by the experimental outcomes, the proposed technology is highly sensitive and reproducible, that is, the limit of quantitation was 10^-5 mg/kg, and the spot-to-spot and block-to-block Raman intensity variations were below 4.2%. We also successfully applied the technology to pears and apples for thiram recognition, yielding outstanding detectability down to 2.5 × 10^-6 and 3.9 × 10^-7 mg/mL (equal to 2.5 × 10^-3 and 3.9 × 10^-4 mg/kg), respectively. These were well below the maximum residue limit (7 mg/kg). More importantly, the linear relationships between thiram levels and the SERS intensity allow for sensitive monitoring of minute variations in agricultural insecticide residues. This proposed detection method can realize in situ detection with a strong signal fingerprint.

Two birds with one stone: An enzyme-regulated ratiometric fluorescent and photothermal dual-mode probe for organophosphorus pesticide detection

In this study, based on the oxidase activity and photothermal effect of manganese dioxide nanosheets (MnO₂ NSs), with thiamine (TH) as the fluorescence response signal and tris (2,2'-bipyridyl) ruthenium (II) hexahydrate as the reference signal, an enzyme-regulated ratiometric fluorescence and photothermal dual-mode probe was constructed for the quantitative detection of organophosphorus pesticide (OPs) residues. OPs reduced the production of the reductive product thiocholine by inhibiting the activity of acetylcholinesterase, thereby regulating the residual amount of MnO₂ NSs. With the increase of OPs concentration, the color of the probe solution gradually transitioned from red to blue, and the temperature gradually increased. Using dichlorvos and chlorpyrifos as pesticide models, the developed probes exhibited sensitive responses to OPs in a wide linear range of 0.1-8000 ng/mL. The detection limits of dichlorvos and chlorpyrifos in fluorescence mode were 1.13 × 10^-3 ng/mL and 0.86 ng/mL, respectively. The corresponding detection limits in photothermal mode were 1.01 ng/mL and 1.02 ng/mL, respectively. The proposed probe displayed excellent anti-interference and reliability in the analysis of OPs residues in real samples. The dual-mode probe with self-verification function is expected to provide more accurate and robust detection results than the single-mode probe, and has a wider application prospect.

A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Near-infrared-excited upconversion nanoparticles (UCNPs) have multicolor emissions, a low auto-fluorescence background, a high chemical stability, and a long fluorescence lifetime. The fluorescent probes based on UCNPs have achieved great success in the analysis of different samples. Here, we presented the research results of UCNPs probes utilized in analytical applications including environment, biology, food and medicine in the last five years; we also introduced the design and construction of upconversion optical sensing platforms. Future trends and challenges of the UCNPs used in the analytical field have also been discussed with particular emphasis.

CRISPR-Cas12a-mediated luminescence resonance energy transfer aptasensing platform for deoxynivalenol using gold nanoparticle-decorated Ti3C2Tx MXene as the enhanced quencher

Deoxynivalenol (DON) is a typical mycotoxin in cereals and poses tremendous threats to the ecological environment and public health. Therefore, exploiting sensitive and robust analytical methods for DON is particularly important. Here, we fabricated a CRISPR-Cas12a-mediated luminescence resonance energy transfer (LRET) aptasensor to detect DON by using single-stranded DNA modified upconversion nanoparticles (ssDNA-UCNPs) as anti-interference luminescence labels and gold nanoparticle-decorated Ti₃C₂T_x MXene nanosheets (MXene-Au) as enhanced quenchers. The DON aptamer can activate the trans-cleavage activity of Cas12a to indiscriminately cut nearby ssDNA-UCNPs into small fragments, which prevents ssDNA-UCNPs from adsorbing onto MXene-Au, and the upconversion luminescence (UCL) remains. Upon the binding of the aptamer with DON, the trans-cleavage activity of Cas12a was suppressed, and the ssDNA-UCNPs were not cleaved and easily adsorbed onto MXene-Au, which caused UCL quenching. Under optimized conditions, the limit of detection was determined to be 0.64 ng/mL with a linear range of 1 - 500 ng/mL. In addition, the sensor was successfully applied to detect DON in corn flour and Tai Lake water with recoveries of 96.2 - 105% and 95.2 - 104%, respectively. This platform achieves a sensitive and specific analysis of DON and greatly broadens the detection range of CRISPR-Cas sensors for non-nucleic acids hazards in the environment and food.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

Progress in Nanomaterials-Based Enzyme and Aptamer Biosensor for the Detection of Organophosphorus Pesticides

With the improvement of people's safety awareness, the requirement of pesticide detection is gradually increasing, and many new detection methods toward Organophosphorus pesticide (OPs) has been further developed and applied. Nanomaterials-based biosensors have played an important role in the trace detection of OPs. This article mainly introduces the detection principle of enzymes and aptamers as the identification element of biosensors. Various nanomaterials (i.e., metals and metal oxides, carbon nanotubes, graphene and graphene oxide, quantum dots, metal organic frameworks, molecular imprinted polymers, etc.) possess their unique properties and play different roles in the enzyme and aptamer-based biosensors toward OPs: (a) to produce the optical or electrochemical signal; (b) as a carrier to load the enzyme or aptamer; (c) to enhance the signal response. Besides, the intelligent portable devices provide the possibility to realize the onsite and real-time detection. The limitations of some nanomaterials and the future development are discussed. Finally, the future of enzyme and aptamer-based biosensors has prospected.

Graphitic-phase C3N4 nanosheets combined with MnO2 nanosheets for sensitive fluorescence quenching detection of organophosphorus pesticides

In this study, we have developed a sensitive approach to measure organophosphorus pesticides (OPs) using graphitic-phase C₃N₄ nanosheets (g-C₃N₄) combined with a nanomaterial-based quencher, MnO₂ nanosheets (MnO₂ NS). Since MnO₂ NS can quench the fluorescence of g-C₃N₄ via the inner-filter effect (IFE), enzymatic hydrolysate (thiocholine, TCh) can efficiently trigger the decomposition of MnO₂ nanosheets in the presence of acetylcholinesterase (AChE) and acetylthiocholine (ATCh), resulting in the fluorescence recovery of g-C₃N₄. OPs, as inhibitors to AChE activity, can prevent the generation of TCh and decomposition of MnO₂ nanosheets while exhibiting fluorescence quenching. Therefore, the AChE-ATCh-MnO₂-g-C₃N₄ system can be utilized to quantitatively detect OPs based on g-C₃N₄ fluorescence. Under optimal conditions, the linear ranges for the determination of parathion-methyl (PM) and 2,2-dichlorovinyl dimethyl phosphate (DDVP) were found to be 0.1-2.1 ng/mL and 0.5-16 ng/mL, respectively, with limits of detection of 0.069 ng/mL and 0.20 ng/mL, respectively. The advantages of this assay are user-friendliness, ease of use, and cost effectiveness compared to other more sophisticated analytical instruments.

Recent advances and perspectives of enzyme-based optical biosensing for organophosphorus pesticides detection

The overuse or abuse of organophosphorus pesticides (OPs) can bring about severe contamination problems in foodstuff and the environment, which will seriously threaten human health and the ecosystem's cycle. Hence, it is in high demand to establish sensitive, portable, specific, and cost-effective methods for monitoring OPs to control food safety, protect the ecosystem, and prevent disease. The optical biosensor with enzyme as bio-recognition elements has been an effective alternative for OPs detection. Herein, we firstly introduce various enzymes, sensing mechanisms, advantages and disadvantages used as bio-recognition elements in optical sensing for OPs detection. Then, we review various optical biosensing strategies based on enzymes as recognition elements that were ingeniously designed and successfully utilized for OPs detection, with a particular emphasis on photoluminescence (PL), chemiluminescence (CL), electrochemiluminescence (ECL), and colorimetric (CM) biosensing strategies. We not only highlight the state-of-art developments and the construction strategies of the enzyme-based optical biosensing method but also summarize the existing deficiencies, current challenges, and the future perspectives of OPs detection.

Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Foodborne diseases have become a significant threat to public health worldwide. Development of analytical techniques that enable fast and accurate detection of foodborne pathogens is significant for food science and safety research. Assays based on lanthanide (Ln) ion-doped upconversion nanoparticles (UCNPs) show up as a cutting edge platform in biomedical fields because of the superior physicochemical features of UCNPs, including negligible autofluorescence, large signal-to-noise ratio, minimum photodamage to biological samples, high penetration depth, and attractive optical and chemical features. In recent decades, this novel and promising technology has been gradually introduced to food safety research. Herein, we have reviewed the recent progress of Ln³⁺-doped UCNPs in food safety research with emphasis on the following aspects: 1) the upconversion mechanism and detection principles; 2) the history of UCNPs development in analytical chemistry; 3) the in-depth state-of-the-art synthesis strategies, including synthesis protocols for UCNPs, luminescence, structure, morphology, and surface engineering; 4) applications of UCNPs in foodborne pathogens detection, including mycotoxins, heavy metal ions, pesticide residue, antibiotics, estrogen residue, and pathogenic bacteria; and 5) the challenging and future perspectives of using UCNPs in food safety research. Considering the diversity and complexity of the foodborne harmful substances, developing novel detections and quantification techniques and the rigorous investigations about the effect of the harmful substances on human health should be accelerated.