Facile synthesis of covalent organic frameworks functionalized with graphene hydrogel for effectively extracting organophosphorus pesticides from vegetables

NiFe-LDH/nylon 6 composite electrospun on polypropylene membrane: A new extractive device development for porous membrane protected micro-solid-phase extraction of organophosphate pesticides from fresh fruit juice samples coupled with liquid chromatography tandem mass analysis

A unique strategy for developing porous membrane protected micro-solid phase extraction has been provided. An electrospun composite was fabricated on the sheet of membrane. To this end, NiFe-layered double hydroxide/Nylon 6 composite nanofibers were coated on a polypropylene membrane sheet followed by folding into a pocket shape, which were then utilized as a novel extractive device to extract of organophosphorus pesticides from fresh fruit juice samples prior to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The fabricated hybrid composites were successfully characterized. The effective parameters on extraction performance were investigated. LODs were 0.020-0.065 ng mL-1. Excellent linearity (R2≥0.996) was observed between 0.05 and 100.0 ng mL-1. RSDs% were in the range of 3.1-5.8% (intra-day, n = 3) and 2.6-5.5% (inter-day, n = 3×3). Satisfactory related recovery values within the acceptable range of 90.7-111.2% with RSDs% below 6.7% were achieved for the analysis of real samples.

Synthesis and Characterization of Environmentally Friendly β-Cyclodextrin Cross-Linked Cellulose/Poly(vinyl alcohol) Hydrogels for Adsorption of Malathion

The widespread use of malathion enhances agricultural plant productivity by eliminating pests, weeds, and diseases, but it may lead to serious environmental pollution and potential health risks for humans and animals. To mitigate these issues, environmentally friendly hydrogel adsorbents for malathion were synthesized using biodegradable polymers, specifically cellulose, β-cyclodextrin (β-CD), poly(vinyl alcohol) (PVA), and biobased epichlorohydrin as a cross-linker. This study investigated the effects of the cellulose-to-PVA ratio and epichlorohydrin (ECH) content on the properties and malathion adsorption capabilities of β-CD/cellulose/PVA hydrogels. It was found that the gel content of the hydrogels increased with a higher cellulose-to PVA and ECH ratio, whereas the swelling ratio decreased, indicating a denser structure that impedes water permeation. In addition, various parameters affecting the malathion adsorption capacity of the hydrogel, namely, contact time, pH, hydrogel dosage, initial concentration of malathion, and temperature, were studied. The hydrogel prepared with a β-CD/cellulose/PVA ratio of 20:40:40 and 9 mL of ECH exhibited the highest malathion adsorption rate and capacity, which indicated an equilibrium adsorption capacity of 656.41 mg g-1 at an initial malathion concentration of 1000 mg L-1. Fourier transform infrared spectroscopy (FTIR), ζ-potential, and X-ray photoelectron spectroscopy (XPS) and NMR spectroscopy confirmed malathion adsorption within the hydrogel. The adsorption process followed intraparticle diffusion kinetics and corresponded to Freundlich isotherms, indicating multilayer adsorption on heterogeneous substrates within the adsorbent, facilitated by diffusion.

Facile preparation of biomimetic mineralized COFs based on magnetic silk fibroin and its effective extraction of sulforaphane from cruciferous vegetables

A novel biomimetic mineralized covalent organic framework (BM-COF) was prepared based on magnetic silk fibroin and a new sulforaphane pretreatment technology was constructed. First, metal coordination was performed on the surface of silk fibroin, and nanoparticles were deposited by in-situ mineralization after co-precipitation. Then, biomineralized COFs were prepared by in-situ self-assembly of a COF layer on Fe3O4@silk fibroin surface guided by interfacial directional growth technology. The BM-COFs had a multilayer structure, large specific surface area and pore volume, and superparamagnetic properties, which make them an ideal adsorbent. The adsorption of sulforaphane by BM-COFs is mainly multi-molecular layer adsorption and chemisorption, there might be electrostatic action, π-stacking and hydrogen bonding in the adsorption process. The composite material was successfully used for the pretreatment of sulforaphane in cruciferous vegetables. An extraction time of 30 min gave extraction efficiencies as high as 92%, and the recovery could reach more than 73%.

Facile Preparation of Magnetic COF-on-COF for Rapid Adsorption and Determination of Sulforaphane from Cruciferous Vegetables

Sulforaphane (SFN) is a natural isothiocyanate compound widely abundant in cruciferous vegetables with multiple bioactive functions. However, traditional analytical methods for the extraction and determination of SFN are cumbersome, time-consuming, and low sensitivity with large amounts of organic solvents. Herein, novel magnetic COF-on-COFs (MB-COFs) were fabricated using Fe3O4 as a magnetic core and COFs-1 grown with COFs-2 as a shell, and they were used as efficient adsorbents of magnetic dispersive solid-phase extraction for rapid quantification of SFN in cruciferous vegetables by combining with HPLC-MS/MS. At the optimal ratio of COFs-1 to COFs-2, MB-COFs had a spherical cluster-like structure and a rough surface, with a sufficient magnetic response for rapid magnetic separation (1 min). Due to the introduction of Fe3O4 and COFs-2, MB-COFs exhibited outstanding extraction efficiencies for SFN (92.5-97.3%), which was about 18-72% higher than that of the bare COFs. Moreover, MB-COFs showed good adsorption capacity (Qm of 18.0 mg/g), rapid adsorption (5 min) and desorption (30 s) to SFN, and favorable reusability (≥7 cycles) by virtue of their unique hierarchical porous structure. The adsorption kinetic data were well fitted by the pseudo-second-order, Ritchie-second-order, intra-particle diffusion, and Elovich models, while the adsorption isotherm data were highly consistent with the Langmuir, Temkin, and Redlich-Peterson models. Finally, under the optimized conditions, the developed method showed a wide linear range (0.001-0.5 mg/L), high sensitivity (limits of quantification of 0.18-0.31 μg/L), satisfactory recoveries (82.2-96.2%) and precisions (1.8-7.9%), and a negligible matrix effect (0.82-0.97). Compared to previous methods, the proposed method is faster and more sensitive and significantly reduces the use of organic solvents, which can achieve the efficient detection of large-scale samples in practical scenarios. This work reveals the high practical potential of MB-COFs as adsorbents for efficient extraction and sensitive analysis of SFN in cruciferous vegetables.

Exploration of porous imine-based covalent organic framework for solid-phase extraction of five trace sulfonamides in food samples

In this article, a highly crystalline porous imine-based covalent organic framework was synthesized at room temperature and used as solid-phase extraction (SPE) adsorbent for the purification and enrichment of trace sulfonamides (SAs) from food samples. The structure of the obtained material was characterized and studied in detail. The extraction process was optimized and the final elution was determined by the ultra-high-performance liquid chromatography-quadrupole time of flight mass spectrometry method. Low limits of detection (0.02-0.19 μg/kg) were obtained under optimal conditions, with the recoveries ranging from 70.5% to 105.3% when spiked at different levels. The adsorption process of the material for SAs was fitted by the Langmuir and Freundlich adsorption isotherm model, and the extraction capacity for Nitrofuran metabolites from food samples was also investigated for comparison. The results demonstrated that the framework was a good candidate SPE adsorbent that can be used for the enrichment of drug residues in complex matrix, and the work may provide a systematic study method for the development of porous adsorbents.

Fluorescent covalent organic frameworks for environmental pollutant detection sensors and enrichment sorbents: a mini-review

Covalent organic frameworks (COFs) are a class of porous crystalline materials based on organic building blocks containing light elements, such as C, H, O, N, and B, interconnected by covalent bonds. Because of their regular crystal structure, high porosity, stable mechanical structure, satisfactory specific surface area, easy functionalization, and high tunability, they have important applications in several fields. Currently, most of the established methods based on COFs can only be used for individual detection or adsorption of the target. Impressively, fluorescent COFs as a special member of the COF family are able to achieve highly selective and sensitive detection of target pollutants by fluorescence enhancement or quenching. The construction of a dual-functional platform for detection and adsorption based on fluorescent COFs can enable the simultaneous realization of visual monitoring and adsorption of target pollutants. Therefore, this paper reviews the research progress of fluorescent COFs as fluorescence sensors and adsorbents. First, the fluorescent COFs were classified according to the different bonding modes between the building blocks, and then the applications of fluorescent COF-based detection and adsorption bifunctional materials for various environmental contaminants were highlighted. Finally, the challenges and future application prospects of fluorescent COFs are discussed.

Sulfur-functionalized porphyrin-based covalent organic framework as a metal-free dual-functional catalyst for photodegradation of organophosphorus pesticides under visible-LED-light

Parathion and diazinon are two significant organophosphorus pesticides broadly used in agriculture. However, these compounds are toxic and can enter into the environment and atmosphere via various processes. Herein, we synthesized and post-functionalized a porphyrinic covalent organic framework (COF), COF-366, with elemental sulfur under solvent-free conditions to give polysulfide-functionalized COF-366, namely PS@COF. The resulting material consisting of porphyrin sensitizer and sulfur nucleophilic sites was used as a dual-functional heterogeneous catalyst for the degradation of these organic compounds using visible-LED-light. Accordingly, the effects of several pertinent parameters such as pH (3-9), the catalyst dosage (5-30 mg), time (up to 80 min), and substrate concentration (10-50 mg L-1) were studied in detail and optimized. The post-modified COF showed excellent photocatalytic activity (>97%) in the detoxification of diazinon and parathion for 60 min at pH 5.5. Kinetic studies indicated a fast degradation rate with pseudo-second order model for 20 mg L-1 of diazinon and parathion. The total organic carbon detection and gas chromatography-mass spectrometry (GC-MS) confirmed the organic intermediates and byproducts formed during the process. PS@COF displayed good recyclability and high reusable efficiency for six cycles without a noteworthy lose in its catalytic activity, owing to its robust structure.

Fabrication of β-cyclodextrin-polyacrylamide/covalent organic framework hydrogel at room temperature for the efficient removal of triazole fungicides from environmental water

Triazole is frequently-used fungicide, which can leach into surface water through farmland and cause serious environmental pollution. Continuous exposure to triazole fungicides may cause harm to human health. Herein, β-cyclodextrin-polyacrylamide/covalent organic framework (β-CD-PAAM/TFPB-BD) hydrogel was fabricated at room temperature and used for the efficient removal of triazole fungicides. It displayed a short adsorption equilibrium time (50 min) and a total qe of 79.92 mg g-1. The adsorption process for triazole fungicides on β-CD-PAAM/TFPB-BD hydrogel conforms to the pseudo-second-order kinetic model and Freundlich model. The prepared hydrogel was recyclable and resistant to salt, high temperature, acid, and alkali. The reusability of fabricated sorbent can be achieved (i.e., five extraction cycles) for removal of target fungicides. Moreover, the β-CD-PAAM/TFPB-BD hydrogel was successfully applied to remove triazole fungicides in environmental water with removal efficiency ranging from 79.4% to 99.0%.

Applicability and Limitations of a Capillary-LC Column-Switching System Using Hybrid Graphene-Based Stationary Phases

Graphene oxide sheets fixed over silica particles (SiGO) and their modification functionalized with C18 and endcapped (SiGO-C18ec) have been reported as sorbents for extraction and analytical columns in LC. In this study, a SiGO column was selected as the extraction column and a SiGO-C18ec as the analytical column to study the applicability and limitations of a column-switching system composed exclusively of columns packed with graphene-based sorbents. Pyriproxyfen and abamectin B1a were selected as the analytes, and orange-flavored carbonated soft drinks as the matrix. The proposed system could be successfully applied to the pyriproxyfen analysis in a concentration range between 0.5 to 25 µg/mL presenting a linearity of R² = 0.9931 and an intra-day and inter-day accuracy of 82.2-111.4% (RSD < 13.3%) and 95.5-99.8% (RSD < 12.7%), respectively. Furthermore, the matrix composition affected the area observed for the pyriproxyfen: the higher the concentration of orange juice in the soft drink, the higher the pyriproxyfen the signal observed. Additionally, the SiGO extraction column presented a life use of 120 injections for this matrix. In contrast, the proposed system could not apply to the analysis of abamectin B1a, and the SiGO-C18ec analytical column presented significant tailing compared to a similar approach with a C18 analytical column.

A new approach of magnetic field application in miniaturized pipette-tip extraction for trace analysis of four synthetic hormones in breast milk samples

Herein, a novel homemade electrical device was designed, including two pieces of external neodymium magnets, providing a reciprocating magnetic field to introduce a magnetic-assisted dispersive pipette-tip micro solid-phase extraction. To evaluate the performance efficiency of the proposed method, a novel magnetic calcined GO/SiO₂@Co-Fe nanocube sorbent was synthesized, filled into the pipette-tip, exposed to the reciprocating magnetic field, and applied for the preconcentration of some hormone therapy drugs in human biological matrices. The effective adsorption and desorption parameters were optimized using a rotatable central composite design and one-variable-at-a-time approaches. Under the optimized conditions, the target analytes' detection limits were found to be below 0.02 ng mL^-1. Moreover, the calibration curves were linear in the range of 0.03-500.00 ng mL^-1 (R² > 0.9966), with RSDs% less than 7.8 %. Eventually, the established method was applied to extract the analytes from breast milk samples, followed by LC-ESI-MS/MS analysis.

Facile room temperature synthesis of a NiFe2O4-based magnetic covalent organic framework for the extraction of tetracycline residues in environmental water samples prior to HPLC

In this study, a functionalized magnetic covalent organic framework (NiFe₂O₄@TAPB-TPA) was fabricated with NiFe₂O₄ nanoparticles as the magnetic core, and 1,3,5-tris(4-aminophenyl)benzene (TAPB) and terephthalaldehyde (TPA) as building blocks by a facile room temperature strategy. Benefitting from the π-π stacking and hydrogen bond interaction, NiFe₂O₄@TAPB-TPA showed great potential as a magnetic adsorbent for the extraction of tetracyclines (TCs). Under optimal conditions, good linearities (R² > 0.9990) were obtained between the peak area and TC concentration in the range of 1-500 μg L^-1 with limits of detection ranging from 0.09 to 0.26 μg L^-1. The intra-day and inter-day relative standard deviations were less than 2.2% and 4.7%, respectively. The established method was successfully applied for the determination of TCs in diverse environmental water samples with satisfactory recoveries in the range of 91.6-102.7%. In addition, NiFe₂O₄@TAPB-TPA showed good reusability with the recoveries for TCs higher than 73.1% after nine recycles, indicating potential application of NiFe₂O₄@TAPB-TPA as an ideal adsorbent for the enrichment of TCs.

Carbon aerogels derived from waste paper for pipette-tip solid-phase extraction of triazole fungicides in tomato, apple and pear

In order to develop environmentally friendly, economical and facile preparation method of carbon aerogels (CAs), the waste printing paper as the raw material was combined with graphene oxide and carboxylic multi-walled carbon nanotubes to produce CAs (ρ = 44 mg cm^-3). The CAs with different composition were investigated, the addition of graphene oxide led to the reduction of adsorption sites and the reduction of extraction performance. But the carbon nanotubes made CAs have a better pore structure. The CAs as adsorbent were loaded into a pipette-tip for solid-phase extraction of hexaconazole and diniconazole. Coupled with gas chromatography, an analytical method was established under the optimized conditions. The limits of detection were between 0.08 and 0.32 mg kg^-1, the linear ranges were 0.96-200.0 mg kg^-1 and 0.24-200.0 mg kg^-1. The relative recoveries were in the range of 81.0-119%. The results indicated that the method had potential application for the determination of triazole fungicides.

Determination of organophosphorus in dairy products by graphitic carbon nitride combined molecularly imprinted microspheres with ultra performance liquid chromatography

•

An OPP-based molecularly imprinted microsphere was synthesized.

•

Composite material was synthesized by polymerizing the MIM on the surface of g-C₃N₄.

•

A novel SPE cartridge was prepared by using the composite material MIM/g-C₃N₄.

•

An SPE-UPLC method was developed for the detection of OPPs in dairy products.

Organophosphorus (OPPs) residues in dairy products are a potential threat to human health. To extract trace amounts of OPPs in dairy products, a graphitic carbon nitride (g-C₃N₄) was synthesized and combined with OPPs-based molecularly imprinted microspheres (MIM) to create a composite material (MIM/g-C₃N₄). Then, the MIM/g-C₃N₄ was used to prepare a solid phase extraction (SPE) cartridge to detect the OPPs in dairy products with UPLC method. The specific surface area of MIM/g-C₃N₄ was 172.208 m²/g, good thermal stability under 300℃, and could reuse up to 15 times. The four OPPs had good linear relationship within the range of 1–10000 ng/mL (r² > 0.999). The limits of detection were 0.7–2.6 ng/mL, and recoveries from blank dairy samples were 86.4 to 95.3 %. In this study, MIM combined with g-C₃N₄ was firstly utilized for the detection of OPPs in dairy products, which indicated it might be an ideal adsorbent for dairy products pretreatment.

Layered Double Hydroxide@Metal-Organic Framework Hybrids for Extraction of Indole-3-Carbinol From Cruciferous Vegetables

Cruciferous vegetables are rich in glucosinolates, which can be metabolized to produce the antitumor compound indole-3-carbinol (I3C). The conventional solvent extraction method for I3C is inefficient. To improve the extraction efficiency of I3C from cruciferous vegetables, we prepared a metal-organic framework (MOF) material (Fe₃O₄@Zn-Al-LDH@B-D-MIL-100). First, Fe₃O₄ nanoparticles were introduced to layered double hydroxides by in situ polymerization. Then, the MOF material was grown on the surface of the layered double hydroxide by co-precipitation and the layer-by-layer self-assembly method. This gave Fe₃O₄@Zn-Al-LDH@B-D-MIL-100, which was characterized using a variety of techniques. The results showed that Fe₃O₄@Zn-Al-LDH@B-D-MIL-100 had a double-layer porous structure, excellent superparamagnetism (11.54955 emu/g), a large specific surface area (174.04 m²/g), and a pore volume (0.26 cm³/g). The extraction conditions for I3C were optimized. Non-linear fitting of the static adsorption model showed that the adsorption was mainly monolayer. Fe₃O₄@Zn-Al-LDH@B-D-MIL-100 had fast adsorption kinetics and could extract 95% of I3C in 45 min. It is superior to the traditional solvent extraction method because of its high enrichment efficiency in a short time and environmental friendliness. The successful preparation of the new nanomaterial will provide a new reference for the enrichment and extraction of the I3C industry.

Recent progress in organic-inorganic hybrid materials as absorbents in sample pretreatment for pesticide detection

Sample pretreatment is essential for trace analysis of pesticides in complex food and environment matrices. Recently, organic-inorganic hybrid materials have gained increasing attention in pesticide extraction and preconcentration. This review highlighted the common organic-inorganic hybrid materials used as absorbents in sample pretreatment for pesticide detection. Furthermore, the preparation and characterization of organic-inorganic hybrid materials were summarized. To obtain a deep understanding of adsorption toward target analytes, the adsorption mechanism and absorption evaluation were discussed. Finally, the applications of organic-inorganic hybrid materials in sample pretreatment techniques and perspectives in the future are also discussed.

Synthesis of metal-organic framework @molecularly imprinted polymer adsorbents for solid phase extraction of organophosphorus pesticides from agricultural products

The novel core-shell structural zeolitic imidazolate framework-8 @molecularly imprinted polymers were successfully synthesized by surface imprinting technique and used as adsorbents for solid-phase extraction of organophosphorus pesticides. The obtained hybrid composites were characterized by scanning electron microscopy, transmission electron microscopy and Fourier-transform infrared, and their adsorbing and recognition performance were evaluated by binding experiments. The results showed that zeolitic imidazolate framework-8 @molecularly imprinted polymers presented a typically core-shell structure with molecularly imprinted shell (about 50 nm) homogeneously polymerized on the surface of zeolitic imidazolate framework-8 core, and exhibited specific recognition towards organophosphorus pesticides with fast adsorption capacity. The adsorption and desorption conditions including sample loading solvent, sample pH, washing and elution solvent were optimized. Under optimum conditions, the solid-phase extraction based on zeolitic imidazolate framework-8 @molecularly imprinted polymers combined with high liquid chromatography-tandem mass spectrometry method for determining organophosphorus pesticides was established and exhibited good linearity (R² ≥ 0.9927) in the range of 1-200 µg/L. With spiked at three different concentration levels in agricultural products (cauliflower, radish, pear, muskmelon), the recoveries ranged from 82.5% to 123.0% with relative standard deviations lower than 8.24%. The developed method was sensitive, convenient and efficient. More importantly, this study could provide a promising strategy for designing new adsorbents with extremely fast mass transfer rate for other potential trace contaminants.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

Magnetic covalent organic framework immobilized gold nanoparticles with high-efficiency catalytic performance for chemiluminescent detection of pesticide triazophos

Covalent organic frameworks (COFs) are considered to be a promising support material for catalyst due to their highly ordered porous structure. Here, a core-shell structured Fe₃O₄ magnetic covalent organic framework (Fe₃O₄@COF) was synthesized and employed to provide basic sites for immobilization of gold nanoparticles (AuNPs). The AuNPs was in-situ immobilized on the shell of Fe₃O₄@COF via a citrate reducing method. The Fe₃O₄@COF-AuNP had convenient magnetic separability and exhibited excellent mimicking peroxidase-like activity in catalyzing chemiluminescence (CL) reaction of luminol with hydrogen peroxide (H₂O₂). With acetylcholine chloride (ACh) as substrate of acetylcholinesterase (AChE), a CL method was exploited for sensitive detection of organophosphorus pesticide triazophos due to its irreversible inhibiting effect on the AChE activity and subsequently influences the production of H₂O₂ under the condition of choline oxidase (ChOx). This method gave a good linearity for triazophos in the range of 5.0-300.0 nmol L^-1, and a limit of detection (LOD) of 1 nmol L^-1 was acquired. The applicability of this method was verified by the determination of triazophos in different spiked vegetable samples.

Sensitive fluorescence and visual detection of organophosphorus pesticides with a Ru(bpy)32+-ZIF-90-MnO2 sensing platform

Fluorescence sensing organophosphorus pesticides (OPs) is of great importance for both food safety and global environment; however, the reported fluorescent probes are usually directly exposed to the external environment, resulting in premature leakage or photobleaching and thus limiting their photostability and assay sensitivity. In this work, a fluorescent sensing platform consisting of a novel luminescent metal-organic framework (Ru(bpy)₃²⁺-ZIF-90) and manganese dioxide nanosheets (MnO₂ NSs) was prepared for sensing OPs. Due to the protection and improvement in the fluorescence of Ru(bpy)₃²⁺ by ZIF-90, the Ru(bpy)₃²⁺-ZIF-90 probe displayed remarkable photostability and high stability in water. By virtue of the high stability of Ru(bpy)₃²⁺-ZIF-90, as well as the outstanding fluorescence quenching and notable recognition ability of the MnO₂ NSs, this sensing platform provided excellent detection capability for parathion-methyl, with a wide concentration range of 0.050-60 ng mL^-1 and a low detection limit of 0.037 ng mL^-1. Additionally, the system exhibited a visual color change with the concentration of the OPs under sunlight. Moreover, satisfactory recoveries ranging from 93.3% to 103.6% were obtained for the real samples. The results indicated that the Ru(bpy)₃²⁺-ZIF-90-MnO₂-based OP sensing platform is promising for applications in food safety and environmental monitoring.

Online extraction based on ionic covalent organic framework for sensitive determination of trace per- and polyfluorinated alkyl substances in seafoods by UHPLC-MS/MS

The ionic covalent organic framework (TPB-BFBIm-iCOF) was facilely synthetized by the size-controllable confinement method and chosen as the online solid phase extraction (SPE) adsorbent. This adsorbent showed fast adsorption equilibrium (5 min) and high adsorption capacity (87.7-140.8 mg g^-1) for the per- and polyfluorinated alkyl substances (PFASs). The TPB-BFBIm-iCOF microsphere revealed the satisfactory enrichment performance for PFASs by means of the electrostatic interaction, hydrophobic effect and ordered channel structure. After extraction, the loaded TPB-BFBIm-iCOF-online SPE column was eluted and applied to the ultrahigh performance liquid chromatography tandem mass spectrometry analysis. Under the optimum conditions, the method displayed satisfactory linearity (R² ≥ 0.9910) and low limits of detection (≤0.0017 ng g^-1) for five seafoods. The relative recoveries of PFASs were 85.3%-109.4% with the relative standard deviation ≤ 9.9%. The method exhibited potential value in monitoring the toxicokinetics and environmental behaviors of PFASs.