Selenium release kinetics and mechanism from Cordyceps sinensis exopolysaccharide-selenium composite nanoparticles in simulated gastrointestinal conditions

Selenium deficiency exacerbates ROS/ER stress mediated pyroptosis and ferroptosis induced by bisphenol A in chickens thymus

Bisphenol A (BPA) is an industrial pollutant that can cause immune impairment. Selenium acts as an antioxidant, as selenium deficiency often accompanies oxidative stress, resulting in organ damage. This study is the first to demonstrate that BPA and/or selenium deficiency induce pyroptosis and ferroptosis-mediated thymic injury in chicken and chicken lymphoma cell (MDCC-MSB-1) via oxidative stress-induced endoplasmic reticulum (ER) stress. We established a broiler chicken model of BPA and/or selenium deficiency exposure and collected thymus samples as research subjects after 42 days. The results demonstrated that BPA or selenium deficiency led to a decrease in antioxidant enzyme activities (T-AOC, CAT, and GSH-Px), accumulation of peroxides (H2O2 and MDA), significant upregulation of ER stress-related markers (GRP78, IER 1, PERK, EIF-2α, ATF4, and CHOP), a significant increase in iron ion levels, significant upregulation of pyroptosis-related gene (NLRP3, ASC, Caspase1, GSDMD, IL-18 and IL-1β), significantly increase ferroptosis-related genes (TFRC, COX2) and downregulate GPX4, HO-1, FTH, NADPH. In vitro experiments conducted in MDCC-MSB-1 cells confirmed the results, demonstrating that the addition of antioxidant (NAC), ER stress inhibitor (TUDCA) and pyroptosis inhibitor (Vx765) alleviated oxidative stress, endoplasmic reticulum stress, pyroptosis, and ferroptosis. Overall, this study concludes that the combined effects of oxidative stress and ER stress mediate pyroptosis and ferroptosis in chicken thymus induced by BPA exposure and selenium deficiency.

Bovine serum albumin as a nanocarrier for efficient encapsulation of hydrophobic garcinol-A strategy for modifying the in vitro drug release kinetics

Garcinia indica, known as kokum, has been extensively researched for its therapeutic potential. Among the wide variety of phytoconstituents, garcinol is the most efficacious, holding anti-inflammatory, anti-cancer, and anti-diabetic properties. Hydrophobicity and a certain level of toxicity have constrained the drug's application and necessitated a modified dosage form design. The drug has been well explored in the form of extracts but bears very limited application in dosage forms. These prompted in implementation of protein polymers, due to non-toxicity, biocompatibility, and biodegradability. BSA encapsulates the drug, by the desolvation method. The unavailability of past exploration of garcinol with protein polymer accelerated the novelty of this study, to improve the solubility and bioavailability of the drug, modify the drug release kinetics, and ascertain the effectiveness of the NPs to combat inflammation in-vitro. NPs were characterized and satisfactory outcomes were retrieved in terms of all characterizations. The drug release studies depicted a sustained release of up to 85 % over 16 h, ensuring that garcinol can be modulated to give a desired scale of modified release. In vitro cellular uptake studies suggested a substantial uptake of NPs in cell lines and its effectiveness to mitigate inflammation was affirmed by in-vitro anti-inflammatory studies, using ELISA.

Preparation, characterization and evaluation of microwave-assisted synthesized selenylation Codonopsis pilosula polysaccharides

In this work, the selenylation Codonopsis pilosula polysaccharide (Se-CPPS) were synthesized using an optimized microwave-assisted method. Then, physicochemical properties, including molecular weight, particle size, valence state of selenium, antioxidant capacity, release mechanism of selenium under gastrointestinal conditions, as well as their effects on HT-29 cell viability were comprehensively investigated. The results demonstrated that Se-CPPS with the highest selenium content (21.71 mg/g) was synthesized using 0.8% nitric acid concentration under microwave conditions of 90 min at 70 °C. FTIR and XPS analysis revealed that Se was bound to the polysaccharide chain in the form of O-Se-O and O-H···Se, with a valence state of either 0 or +4. In vitro investigations on antioxidant activity and selenium release capacity indicated that selenization not only enhanced the antioxidant activity of CPPS but also endowed Se-CPPS with robust selenium release capability in simulated gastric digestion. The effects of Se-CPPS on HT-29 cells was further investigated by CCK-8 method. The results showed that the selenide modification effectively reduced the toxicity of Na2SeO3 and enhanced the viability of CPPS. The findings of this study offer valuable methodological guidance for the synthesis of Se-polysaccharides with superior functional properties.

Investigation of cellular uptake and transport capacity of Cordyceps sinensis exopolysaccharide‑selenium nanoparticles with different particle sizes in Caco-2 cell monolayer

Cordyceps sinensis exopolysaccharide‑selenium nanoparticles (EPS-SeNPs) were successfully constructed, characterized, and its Se release kinetics and mechanism were also evaluated in our previous studies. However, the intestinal cellular uptake and transport capacities of EPS-SeNPs remain unknown. On the basis of our previous researches, this work was designed to evaluate the uptake and transport capacities of EPS-SeNPs (EPS/Se = 20/1, 3/1, 1/1, and 3/4) in intestinal epithelial (Caco-2) cells. Confocal laser scanning microscopy results indicated that the internalization of coumarin-6 labeled EPS-SeNPs was in a time-dependent process and eventually located in the cytoplasm, not in the nucleus. Endocytosis inhibitors were employed to evaluate the cellular uptake pathway of EPS-SeNPs, relevant results revealed that clathrin-, caveolae-, and energy-mediated pathways were participated in the internalization of EPS-SeNPs by Caco-2 cells. In addition, the transportation of EPS-SeNPs across Caco-2 cell monolayers was in a concentration-dependent manner. Different particle sizes of EPS-SeNPs presented different uptake and transport capacities in Caco-2 cells. Noteworthy, EPS/Se = 3/4 with the highest selenium content possessed the most superior cellular uptake and transport abilities in Caco-2 cells. The present work may contribute to illustrate the internalization and transport mechanism of EPS-SeNPs, thus facilitating its application in food and medical industries.

New insights into the influence of encapsulation materials on the feasibility of ultrasonic-assisted encapsulation of Mosla chinensis essential oil

The study aimed to estimate the feasibility of α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), and γ-cyclodextrin (γ-CD) to encapsulate Mosla chinensis essential oil (EO) by ultrasonic-assisted method. The physical properties variations, stabilization mechanisms, and formation processes of the inclusion complexes (ICs) were investigated using experimental methods, molecular docking, and molecular dynamics (MD) simulation. Scanning electron microscopy, fourier transform infrared spectroscopy, thermogravimetric analysis, and gas chromatography-mass spectrometry showed that the ICs were successfully prepared, which differentially improved the thermal stability and retained the chemical composition of EO. The dissolution profile showed that the Peppas model can be used to describe the diffuse release mechanism of EO. Finally, molecular docking and MD simulation theoretically confirmed the interaction and conformational changes of carvacrol (the main active component of Mosla chinensis EO) inside the cavity of CDs. The results indicate that hydrogen bonding was the primary driving force for the carvacrol spontaneous access to the cavity. Further, a binding dynamic balance occurs between carvacrol and β-CD, whereas a bind and away dynamic balance occurs in the IC between carvacrol and α-CD, γ-CD. The comprehensive results show that the medium cavity size of β-CD is a suitable host molecule for Mosla chinensis EO of encapsulation, release, and stabilization. A combination of experimental and theoretical calculations is useful for the pinpoint targeted design and optimization of CD molecular encapsulation of small entity molecules. β-CD was rationally screened as a better candidate for stabilizing EO, which provides an option for a meaningful path to realistic EO applications.

Extraction of cellulose nanocrystalline from Camellia oleifera Abel waste shell: Study of critical processes, properties and enhanced emulsion performance

Cellulose nanocrystals (CNCs) extracted from the waste shell of Camellia oleifera Abel (C. oleifera) are gaining attention as valuable materials. In this study, CNCs were extracted from the agricultural waste shell of C. oleifera through phosphoric acid and sulfuric acid hydrolysis, respectively. Firstly, we optimized the alkaline treatment process for cellulose isolation by using response surface methodology. Furthermore, the properties of CNCs were investigated by neutralizing them with NaOH and NH3·H2O, and by dialysis in water. In addition, the characterization methods including FT-IR, TGA, AFM and TEM were used to analysis the properties of the synthesized CNCs. Finally, CNCs were studied for their application in essential oil-based Pickering emulsions. CNCs obtained from sulfuric acid showed the smallest particle size and good dispersibility. Moreover, the release profiles of essential oils in the emulsions were followed by Peppa's kinetic release model. The antibacterial activity of the emulsions against E. coli and S. aureus showed that CNCs-stabilized emulsions enhanced the antibacterial activity of essential oils. Therefore, neutralization treatments may enhance the properties of CNCs, and CNCs stabilized Pickering emulsions can enhance antibacterial activity of essential oil. This study provides insight into the potential application of CNCs derived from C. oleifera waste shells.

Evaluation of antioxidation, regulation of glycolipid metabolism and potential as food additives of exopolysaccharide from Sporidiobolus pararoseus PFY-Z1

At present, there are relatively few studies on the production of exopolysaccharide (EPS) by yeasts. Therefore, exploring the properties of EPS produced by yeast can not only enrich the source of EPS, but also play an important role in its future application in the food field. The aim of this study was to explore the biological activities of EPS (named SPZ) from Sporidiobolus pararoseus PFY-Z1, as well as the dynamic changes in physical and chemical properties that occur during simulated gastrointestinal digestion, and the effects of SPZ on microbial metabolites during fecal fermentation in vitro. The results revealed that SPZ had good water solubility index, water-holding capacity, emulsifying ability, coagulated skim milk, antioxidant properties, hypoglycemic activities, and bile acid-binding abilities. Furthermore, the content of reducing sugars increased from 1.20 ± 0.03 to 3.34 ± 0.11 mg/mL after gastrointestinal digestion, and had little effect on antioxidant activities. Moreover, SPZ could promote the production of short-chain fatty acids during fermentation for 48 h, in particular, propionic acid and n-butyric acid increased to 1.89 ± 0.08 and 0.82 ± 0.04 mmol/L, respectively. Besides this, SPZ could inhibit LPS production. In general, this study can help us to better understand the potential bioactivities, and the changes in bio-activities of compounds after digestion of SPZ.

The cellular uptake of Cordyceps sinensis exopolysaccharide‑selenium nanoparticles and their induced apoptosis of HepG2 cells via mitochondria- and death receptor-mediated pathways

This wok investigated the effects of Cordyceps sinensis exopolysaccharide‑selenium nanoparticles (EPS-SeNPs), EPS-Se-1, EPS-Se-2, EPS-Se-3, and EPS-Se-4) with particle sizes (79-124 nm) and Se contents (20.11-40.80 μg/mg) on endocytosis and antitumor activity against human hepatocellular carcinoma (HepG2) cells and revealed the apoptosis-related mechanisms. EPS-SeNPs inhibited HepG2 cells proliferation in a dose and Se content-dependent manner by disrupting cell membrane and mitochondrial integrity, promoting reactive oxygen species production. EPS-SeNPs were endocytosed by HepG2 cells through a clathrin-mediated pathway and followed the quasi-first-order kinetics model, indicating physical adsorption played a dominant role in cellular uptake behavior of EPS-SeNPs. Notably, EPS-Se-3 with the lowest particle size (79 nm) showed the highest antitumor activity and the strongest ability to promote cell apoptosis. Western blotting results revealed that EPS-Se-3 increased expressions of Bax, Cytochrome c, cleaved caspase-9, cleaved caspase-3, Fas, p53, and cleaved caspase-8, while decreased the expressions of Bcl-2 and PARP, as contrast to that of control. Overall, EPS-SeNPs induced cell apoptosis through intrinsic mitochondria-mediated and extrinsic death receptor-mediated pathways.

The Developments of Surface-Functionalized Selenium Nanoparticles and Their Applications in Brain Diseases Therapy

Selenium (Se) and its organic and inorganic compounds in dietary supplements have been found to possess excellent pharmacodynamics and biological responses. However, Se in bulk form generally exhibits low bioavailability and high toxicity. To address these concerns, nanoscale selenium (SeNPs) with different forms, such as nanowires, nanorods, and nanotubes, have been synthesized, which have become increasingly popular in biomedical applications owing to their high bioavailability and bioactivity, and are widely used in oxidative stress-induced cancers, diabetes, and other diseases. However, pure SeNPs still encounter problems when applied in disease therapy because of their poor stability. The surface functionalization strategy has become increasingly popular as it sheds light to overcome these limitations in biomedical applications and further improve the biological activity of SeNPs. This review summarizes synthesis methods and surface functionalization strategies employed for the preparation of SeNPs and highlights their applications in treating brain diseases.

A New Galactoglucomannan from the Mycelium of the Medicinal Parasitic Fungus Cordyceps cicadae and Its Immunomodulatory Activity In Vitro and In Vivo

A new galactoglucomannan (C-0-1) was purified from the medicinal parasitic fungus of Cordyceps cicadae using an anion-exchange column and gel permeation column. The results of high-performance liquid chromatography and high-performance gel permeation chromatography indicated that C-0-1 consists of galactose, glucose, and mannose in a ratio of 5:1:4 and has a molecular weight of 23.3 kDa. The combined structural elucidation analysis methods including partial acid hydrolysis, methylation analysis, and NMR experiments revealed that C-0-1 was a comb-like polysaccharide with a core structure including (1→2)-α-D-Manp residues in the backbone and branches at O-6 of the main chain. (1→4)-α-D-Glcp, (1→2)-β-D-Galf, (1→2,6)-β-D-Galf, and terminal β-Galf were located at the side chains. An in vitro experiment using RAW 264.7 cells indicated that C-0-1 exhibits good immunomodulatory activity by enhancing inducible nitric oxide synthase secretion and the production of some major inflammatory cytokines. On inhibiting the cytokine production using anti-pattern recognition receptors antibodies, it was revealed that the activation of macrophages is mainly carried out by C-0-1 through the mannose receptor. Toll-like receptor 4 and Toll-like receptor 2 were also involved in this identification process. An in vivo experiment on immunosuppressive mice treated with cyclophosphamide indicated that C-0-1 improves the secretion of serum-related cytokines (IFN-γ, TNF-α, IL-2, IL-4, and IL-10) and affects the balance of T helper cells Th1/Th2. Given the structural and bioactivity similarity between Cordyceps cicadae and Cordyceps sinensis, we can conclude that Cordyceps cicadae could be used as an important medicinal fungus like Cordyceps sinensis.

Synthesis of zeolite A from fly ash and its application in the slow release of urea

The study focused on the transformation of coal fly ash to zeolite A (ZA) as a potential carrier for the slow release of urea. After being treated with HCl aqueous solution and NaOH successively, SiO₂ and Al₂O₃ were converted into sodium silicoaluminate. The obtained silicoaluminate was then heated with NaAlO₂ in an aqueous NaOH solution at 70-110 °C for 3-18 h and zeolite A was successfully prepared according to the X-ray diffraction measurements. By changing the hydrothermal temperature and time, ZA could reach 237.3 mmol/100 g in maximum cation exchange capacity. ZA impregnated with urea (ZA-U) at a mass ratio of more than 5:1 exhibited slow release of urea and the kinetics release mechanism of ZA-U was proposed. The plant growth test proved that the slow release of urea from ZA-U can promote the growth of maize seedling.

Construction and sustained release of konjac glucomannan/naringin composite gel spheres

Objective

To improve the bioavailability of active substances and reduce the toxic and side effects on the human body, natural biological macromolecules are used to load active substances and control their release speed in different environments of the human body. In this study, mesoporous silica (MSN) was combined with konjac glucomannan (KGM) and sodium alginate (AC) to prepare pH-sensitive konjac glucomannan/sodium alginate-mesoporous silica loaded naringin gel spheres (KS/MSN). On this basis, the structure, morphology, and release properties of the composite gel spheres were characterized. The results showed that the cumulative release rates of both simulated gastric fluid (SGF) and Simulated colonic fluid (SCF) were lower than that of simulated small intestinal fluid (SIF), which indicated that the prepared composite gel spheres were pH-sensitive to SIF and obtained the best release rate of about 70% under SIF environment.

Methods

The pH-sensitive konjac glucomannan/sodium alginate composite gel spheres (KGM/SA) were prepared by combining inorganic nano-materials mesoporous silica (MSN) with natural macromolecular polysaccharides konjac glucomannan (KGM) and sodium alginate (SA) and characterized.

Results

The results showed that there was a process of ionic crosslinking and entanglement between konjac glucomannan (KGM) and sodium alginate (SA). Naringin (NG) and mesoporous silica (MSN) were successfully compounded and had good compatibility. The gel microstructure diagram showed that the addition of MSN improved the gel properties of KGM, and KGM and SA gel spheres (KGM/SA) had good compatibility with mesoporous silica/naringenin nanoparticles (NG/MSN). The study of the simulated digestive environment of the gastrointestinal release medium showed that Konjac glucomannan/sodium alginate-mesoporous silica loaded naringin gel spheres (KS/NM) composite gel spheres had the best slow-release effect and the highest final-release completion degree in SIF. The release of NG from KS/NM composite gel spheres showed a slow upward trend. The results showed that KS/NM composite gel spheres were pH-sensitive.

Conclusion

The KS/NM composite gel spheres showed obvious pH sensitivity to the release of NG, and the gel spheres had a good sustained release effect on NG.

Structure, stability, antioxidant activity, and controlled-release of selenium nanoparticles decorated with lichenan from Usnea longissima

Selenium nanoparticles (SeNPs) have attracted widespread attention, but the poor water dispersibility restricted their applications seriously. Herein, Usnea longissima lichenan decorated selenium nanoparticles (L-SeNPs) were constructed. The formation, morphology, particle size, stability, physicochemical characteristics, and stabilization mechanism of L-SeNPs were investigated via TEM, SEM, AFM, EDX, DLS, UV-Vis, FT-IR, XPS, and XRD. The results indicated that the L-SeNPs displayed orange-red, amorphous, zero-valent, and uniform spherical nanoparticles with an average diameter of 96 nm. Due to the formation of CO⋯Se bonds or the hydrogen bonding interaction (OH⋯Se) between SeNPs and lichenan, L-SeNPs exhibited better heating and storage stability, which kept stable for more than one month at 25 °C in an aqueous solution. The decoration of the SeNPs surface with lichenan endowed the L-SeNPs with superior antioxidant capability, and their free radicals scavenging ability exhibited in a dose-dependent manner. Furthermore, L-SeNPs showed excellent selenium controlled-release performance. In simulated gastric liquids, selenium release kinetics from L-SeNPs followed the Linear superimposition model, which was governed by the polymeric network retardation of macromolecular, while in simulated intestinal liquids, it was well fitted to the Korsmeyer-Peppas model and followed a Fickian mechanism controlled by diffusion.

Fabrication of soy protein isolate/κ-carrageenan hydrogels for release control of hydrophilic compounds: Flax lignans

A suitable carrier for flax lignans using Soybean protein isolated (SPI) - κ-carrageenan (KC) hydrogels was developed. The effects of KC concentration on the stability of hydrogels were investigated, as well as water holding capacity (WHC), syneresis and morphological changes. A solid-like gel network and viscoelasticity of composite hydrogels were confirmed by rheological behavior test. Scanning electron microscopy (SEM) displayed a dense and uniform structure for hydrogels with the optimum KC concentration (0.6 %). Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) curves suggested lignan might interact with SPI and KC by hydrogen bonding or hydrophobic effects. The release of flax lignans in hydrogels was followed with Fick diffusion in simulated gastric fluids (SGF) and non-Fickian diffusion in simulated intestinal fluids (SIF), respectively. The cumulative release rate of flax lignan in complex gels (46.00 %) was lower than that of pure SPI hydrogels (77.43 %) at the end of digestion. The results indicated that KC protected the protein by hindering the accession of digestive enzymes into the hydrogels, thus resulting in a reduction of gel matrix erosion and lignan release during digestion. These findings shield a light on SPI-KC hydrogels as carriers for water-soluble bioactive compounds in food and pharmaceutical industries.

Survey of antibacterial activity and release kinetics of gold-decorated magnetic nanoparticles of Fe0 conjugated with sulfamethoxazole against Escherichia coli and Staphylococcus aureus

Drug delivery of antibiotics with magnetic nanoparticles improved by coating metals such as gold and silver has recently been studied. This work describe a simple method to synthesize modified magnetic nanoparticles which have high ability to modify the customary formulation of antibiotics such as sulfamethoxazole (SMX) and pursuant study of adsorption-desorption (release) of this drug. These synthesized nanoparticles were characterized by different methods, including field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and mapping, Fourier-transform infrared spectroscopy, X-ray diffraction, vibrating-sample magnetometry, thermogravimetric analysis and zeta potential test. Present assay showed a well correlation with the introduced carrier for the drug. Also the hypothesis were proved by some adsorption isotherm models and drug kinetics studies of carriers with different drug release kinetics models. This study confirmed the adsorption isotherm models and kinetics of drug sorbate are Temkin and Pseudo-First-Order Lagergren models, respectively; the kinetics of drug release from this carrier is based on Zero-Order model. The values of MIC in antibacterial test for pure SMX and SMX conjugated nanoparticles against Escherichia coli were calculated to be 14 and 2.5 μg/mL, respectively, and these values against Staphylococcus aureus were 24 and 1.25 μg/mL, respectively.

Synthesis, characterization, and evaluation of microwave-assisted fabricated selenylation Astragalus polysaccharides

Selenylation Astragalus polysaccharides (Se-APS) was fabricated by an optimized microwave-assisted method. Their physicochemical properties, antioxidant capacities and selenium (Se) release rate under gastrointestinal conditions were determined. Se-APS with the highest Se content (18.8 mg/g) was prepared in 0.4 % nitric acid, under the microwave conditions of 90 min and 80 °C. FTIR and XPS spectra indicated that Se was bound to the polysaccharide chain in the form of O-Se-O and O-H···Se, and most of Se⁺⁴ was reduced to Se⁰. Meanwhile, the micromorphology of Se-APS became clusters, loose and porous, which decreased its hydrodynamic particle size and negative surface charges. Besides, Se-APS displayed strong scavenging capacities towards ABTS and superoxide anion free radicals than Na₂SeO₃, and showed higher Se release rate (12.52 ± 0.31 %) under intestinal fluid comparing with gastric fluid (3.14 ± 0.38 %) during 8 h in vitro digestion. The results provided efficient preparation method references for selenylation polysaccharides, and broaden the application fields of APS.

Uniform and disperse selenium nanoparticles stabilized by inulin fructans from Codonopsis pilosula and their anti-hepatoma activities

The present work reported the extraction, purification and characterization of an inulin fructan from Codonopsis pilosula (CPW1) and its application in stabilization of selenium nanoparticles (SeNPs). The morphology, stability, and stabilization mechanism of CPW1 stabilized SeNPs (CPW1-Se) were explored, and the results showed that the SeNPs were amorphous state, with size of 54-79 nm, and kept stable within 15 days due to the interaction between SeNPs and the hydroxyl groups on the surface of CPW1. Moreover, the effects on proliferation and apoptosis of CPW1-Se to both normal cells (293T) and liver cancer cells (Huh-7 and HepG2) were evaluated systematically by using the CCK8 assay, plate clone formation assay, flow cytometry and western blot. The results indicated that CPW1-Se possessed selective anti-hepatoma activities without side effects on normal cells, which exhibited strong potential application in liver cancer treatments.

Digestion and absorption properties of Lycium barbarum polysaccharides stabilized selenium nanoparticles

In the present study, the digestion and absorption properties of Lycium barbarum polysaccharides stabilized selenium nanoparticles (LBP-SeNPs) were investigated. The results showed that selenium nanoparticles (SeNPs) exhibited a higher selenium release rate than LBP-SeNPs (p＜0.05) after being digested in the stages of oral cavity, stomach and intestine. During the digestion process, the particle size of the LBP-SeNPs and SeNPs were both significantly increased, but the particle size of LBP-SeNPs was significantly smaller than that of SeNPs. The results of TEM further indicated that LBP-SeNPs can better maintain the morphology and properties of nanoparticles. Besides, the experiments of the intestinal sac model showed that LBP-SeNPs can better promote the absorption of selenium in various parts (duodenum, jejunum and ileum) of the intestine. Therefore, the LBP can help to improve the structural stability of SeNPs in the digestion process and improve the bioavailability of selenium.

Toxicity of selenium nanoparticles on Poterioochromonas malhamensis algae in Waris-H culture medium and Lake Geneva water: Effect of nanoparticle coating, dissolution, and aggregation

Understanding the algal toxicity of selenium nanoparticles (SeNPs) in aquatic systems by considering SeNPs physicochemical properties and environmental media characteristics is a concern of high importance for the evaluation and prediction of risk assessment. In this study, chitosan (CS) and sodium carboxymethyl cellulose (CMC) coated SeNPs are considered using Lake Geneva water and a Waris-H cell culture medium to investigate the effect of SeNPs on the toxicity of algae Poterioochromonas malhamensis, a widespread mixotrophic flagellate. The influence of surface coating, z-average diameters, ζ-potentials, aggregation behavior, ions release, and medium properties on the toxicity of SeNPs to algae P. malhamensi was investigated. It is found that SeNPs are 5-10 times more toxic in Lake Geneva water compared to the culture medium, suggesting that the traditional algal tests in Waris-H culture medium currently underestimate the toxicity of NPs in a natural water environment. Despite significant dissolution, it is also found that SeNPs themselves are the toxicity driver, and dissolved ions have only a marginal influence on toxicity. SeNPs diameter is found a minor factor in toxicity. Based on a principal component analysis (PCA) it is found that in Lake Geneva water, the nature of the surface coating (CMC versus CS) is the most influential factor controlling the toxicity of SeNPs. In the culture medium, surface coating, ζ-potential, and aggregation are found to contribute at the same level. These results highlight the importance of considering in details both NPs intrinsic and media properties in the evaluation of NPs biological effects.

Stability and surface properties of selenium nanoparticles coated with chitosan and sodium carboxymethyl cellulose

The effect of polysaccharide coatings on the stability and release characteristics of selenium nanoparticles (SeNPs) was evaluated by comparing the characteristics of chitosan-coated SeNPs (CS-SeNPs) and sodium carboxymethyl cellulose-coated SeNPs (CMC-SeNPs). The release characteristics of SeNPs were investigated in storage conditions, gastrointestinal conditions, and free radical systems. CMC-SeNPs formed dimers or trimers, whereas CS-SeNPs were monodispersed but formed large aggregates in a pH range of 7.4-8.25. Upon 50 days of storage at 30 °C, both CMC-SeNPs and CS-SeNPs were converted to Se⁴⁺. SeNPs exhibited a lower release rate in simulated gastrointestinal conditions than in free radical systems. SeNPs release in ABTS and superoxide anion free radical systems followed the first-order and Korsmeyer-Peppas models, respectively, indicating that SeNP release is mainly governed by dissolution mechanisms. Additional studies are needed to examine the potential environmental effects and biological activity of the Se⁴⁺ released from SeNPs.

Coating of betanin and carvone Co-loaded nanoliposomes with synthesized cationic inulin: A strategy for enhancing the stability and bioavailability

Betanin (BET) and carvone (CAR) as antioxidant and antibacterial compounds were co-loaded in the coated nanoliposomes (NLPs) with cationic inulin to improve their stability and bioavailability. A cationic inulin was successfully synthesized and used for surface coating of the NLPs. The zeta potential, particle size, and PDI values of the coated NLPs were 21.70 ± 7.00 mV, 143.5 ± 15.2 nm, and 0.35 ± 0.03 respectively. The encapsulation efficiency values of the coated NLPs for BE and CAR were 86.1 ± 3.9 and 77.2 ± 5.2 %, respectively. Electron microscopy results showed that the coated NLPs had spherical and core-shell structures. The slowest sustained release profile in the simulated gastrointestinal condition was obtained for the coated NLPs. The physical and oxidative stability of NLPs, as well as the physical stability of loaded compounds were improved by surface coating. In conclusion, the developed nanocarrier is a suitable platform to use all benefits of BET and CAR in the food industry.

AIE-active polymeric micelles based on modified chitosan for bioimaging-guided targeted delivery and controlled release of paclitaxel

In this study, a novel polymer based on aggregation-induced emission (AIE) fluorogen, biotin and disulfide bonds modified chitosan (TPE-bi(SS-CS-Bio)) was designed and synthesized. The polymer could self-assemble into micelles in aqueous media and encapsulate paclitaxel (PTX) into the core with high drug loading. Fluorescence study indicated that the micelles exhibited excellent AIE feature with intense blue fluorescence emitted. In vitro drug release study indicated that the micelles could disassemble rapidly in the presence of high level of glutathione. The modification by biotin could enhance the cellular uptake of the micelles. The drug-loaded micelles possessed remarkable cytotoxicity against MCF-7 cells, and their distribution in the cells could be traced due to the excellent AIE feature. In vivo antitumor efficacy study demonstrated the superior antitumor activity of the PTX-loaded TPE-bi(SS-CS-Bio) micelles. These results indicated that TPE-bi(SS-CS-Bio) has the ability of biological imaging and can be used as a potential carrier for PTX.