High internal phase pickering emulsions stabilized by pea protein isolate-high methoxyl pectin-EGCG complex: Interfacial properties and microstructure

Soy protein isolate-xanthan gum complexes to stabilize Pickering emulsions for quercetin delivery

This study aimed to prepare soy protein isolate-xanthan gum complexes (SPI-XG) at pH 7.0 and as emulsifiers to prepare Pickering emulsions for delivering quercetin (Que). The results showed that SPI-XG exhibited a gel network structure in which protein particles were embedded. Fourier transform infrared spectroscopy (FTIR) and molecular docking elucidated that SPI-XG formed through hydrogen bonding, hydrophobic, and electrostatic interactions. Three-phase contact angle (θo/w) of SPI-XG approached 90° with biphasic wettability. SPI-XG adsorbed at the oil-water interface to form an interfacial layer with a gel network structure, which prevented droplet aggregation. Following in vitro simulated digestion, Que displayed higher bioaccessibility in SPI-XG stabilized Pickering emulsions (SPI-XG PEs) than SPI stabilized Pickering emulsions. In conclusion, SPI-XG PEs were a promising system for Que delivery.

Relationship between the interfacial properties of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex and the macroscopic properties of emulsions

This study explored the relationship between the interfacial behavior of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex (LF-EGCG) and the stability of high internal phase Pickering emulsions (HIPPEs). The formation of covalent bond between lactoferrin and polyphenol was verified by the increase in molecular weight. In LF-EGCG group, the surface hydrophobicity, interfacial pressure, and adsorption rate were decreased, while the molecular flexibility, interfacial film viscoelasticity, and interfacial protein content were increased. Meanwhile, LF-EGCG HIPPE possessed reduced droplet size, increased ζ-potential and stability. Rheology showed the viscoelasticity, structural recovery and gel strength of LF-EGCG HIPPE were improved, giving HIPPE inks better 3D printing integrity and clarity. Moreover, the free fatty acids (FFA) release of LF-EGCG HIPPE (62.6%) was higher than that of the oil group (50.1%). Therefore, covalent treatment effectively improved the interfacial properties of protein particles and the stability of HIPPEs. The macroscopic properties of HIPPEs were positively regulated by the interfacial properties of protein particles. The result suggested that the stability of emulsions can be improved by regulating the interfacial properties of particles.

Enhanced emulsification properties of microalgae protein through gellan gum conjugation: Mechanistic insights and applications in curcumin encapsulation and delivery

The emulsification properties of microalgae protein (MP) are poor, especially under acidic and neutral conditions, which may limit the broad applications of MP in food processing. This study aims to explore the effects of gellan gum (GG) on the emulsification properties of MP. Firstly, MP-GG complexes were prepared and their structures characterized. Subsequently, MP-GG complexes stabilized emulsions were prepared and their stability evaluated. Finally, these emulsions were employed for the encapsulation and delivery of curcumin to evaluate their potential as an efficient nutrient delivery medium. Results indicated that MP-GG complexes were formed under various pH conditions, with pH 6 identified as optimal for complexes stability (zeta-potential value was -31 mV). UV-vis and fluorescence spectroscopy demonstrated that GG did not significantly alter the MP's structure but induced slight conformational changes, leading to the burial of some amino acid residues. Zeta potential measurements confirmed that MP-GG complexes were stabilized by strong electrostatic repulsions. The increase of GG content was conducive to providing more negative charge and promoting the dissolution and dispersion of the MP-GG complexes (MP: GG = 1: 1). Emulsions stabilized by MP-GG complexes exhibited smaller droplet sizes and improved stability compared to those stabilized by MP alone, especially at oil phase volume fractions of 60 % and 70 %. Rheological analysis indicated that GG enhanced emulsion stability by increasing viscosity, and higher oil phase volume fractions facilitated better MP-GG complexes adsorption on oil droplets, strengthening network structures of emulsions. During in vitro simulated gastrointestinal digestion, emulsions with a 70 % oil phase exhibited higher curcumin retention rate (31.09 %) and lower curcumin bioaccessibility (13.23 %) compared to those with a 60 % oil phase. This suggests that emulsions with higher oil phase volume fractions may be more suitable for colon-targeted curcumin delivery, with potential applications in promoting colon health. These findings confirm that the complexation of MP and GG was an effective way to improve the emulsification properties of MP. Emulsions stabilized by MP-GG complexes can serve as stable nutritional delivery systems for fat-soluble bioactive compounds.

Enhancing cellulose-stabilized multiphase/Pickering emulsions systems: A molecular dynamics perspective

Cellulose stabilized multiphase systems (CSMS) have garnered significant attention due to their ultra-stabilization mechanism and vast potential across different fields. CSMS have found valuable applications in scientific disciplines, including Food Science, Pharmaceutical Science, Material Science, and related fields, owing to their beneficial attributes such as sustainability, safety, renewability, and non-toxicity. Furthermore, MPS exhibit novel characteristics that enable multiple mechanisms to produce HIPEs, aerogels, and oleogels revealing undiscovered information. Therefore, to explore the undiscovered phenomena of MPS, molecular level insights using advanced simulation/computational approaches are essential. The molecular dynamics simulation (MDS), play a valuable role in analyzing the interactions of ternary interphase. The MDS have successfully quantified the interactions of MPS by generating, visualizing, and analyzing trajectories. Through MDS, researchers have explored CSMS at the molecular level and advanced their applications in 3D printing, packaging, preparation, drug delivery, encapsulation, biosensors, electronic devices, biomaterials, and energy conservation. This review highlights the remarkable advancements in CSMS over the past five years, along with contributions of MDS in evaluating the relationships that dictate the functionality and properties of CSMS. By integrating experimental and computational methods, we underscore the potential to innovate and optimize these multiphase systems for groundbreaking applications.

Synergistic effect of gellan gum and guar gum on improving the foaming properties of soy protein isolate-based complexes: Interaction mechanism and interfacial behavior

Interactions among multi-component play a critical role in modulating the foaming properties of aerated foods. This study evaluated the mechanisms of synergistic improvement of gellan gum (GEG) and guar gum (GUG) on the foaming properties of soy protein isolate (SPI)-based complex. The results showed that the GEG/GUG ratio was closely related to the intermolecular interactions of SPI-based ternary complex and the dynamical changing of its foaming properties. The SPI/GEG/GUG ternary complex with a GEG/GUG ratio of 2/3 exhibited the highest foamability (195 %) and comparable foam stability (99.17 %), which were 32.95 % and 2.99 % higher than that of SPI/GEG binary complex. At this ratio, GUG promoted the interactions between SPI and GEG, and bound to complex's surface through hydrogen bonding, resulting in the increase of particle size and surface charge, and the decrease of surface hydrophobicity. Although this reduced the diffusion of complex onto the air/water interface, it increased permeation rate and molecular rearrangement behavior, which were the potential mechanisms to improve the foaming properties. Additionally, the synergistic effect of GEG and GUG also enhanced the elastic strength and solid characteristics of foam systems. This study provided a theoretical guidance for the targeted modulation of foaming properties of multi-component aerated foods.

Modification mechanism of soybean protein isolate-soluble soy polysaccharide complex by EGCG through covalent and non-covalent interaction: Structural, interfacial, and functional properties

Soybean protein isolate was modified with polysaccharides and polyphenols to prepare a natural emulsifier with antioxidant capacity. Physicochemical, structural, interfacial, and functional properties of SPI-SSPS complex were investigated after covalent and non-covalent interacted with EGCG. SPI-SSPS-EGCG ternary complex with low EGCG concentrations (0.0625 and 0.125 mg/mL) showed a significant increase in absolute potential value and a decrease in turbidity. EGCG destroyed the original rigid structure of SPI-SSPS complex, and the covalent complexes had an ordered structure, while the non-covalent interaction resulted in disordered. The ternary complex with high EGCG concentrations (0.25 and 0.5 mg/mL) exhibited stronger EGCG binding capacity and lower surface hydrophobicity, which in turn affected its interfacial properties. The EAI and ESI of SPI-SSPS-EGCG covalent complex increased significantly, while the non-covalent complex had a significant change in EAI but no significant change in ESI with increasing EGCG concentration. The ternary complex showed significantly enhanced antioxidant capacity. The SPI-SSPS-EGCG ternary complex, with excellent antioxidant capacity and emulsifying property, making it suitable for emulsion delivery systems.

Fabrication of soy protein-polyphenol covalent complex nanoparticles with improved wettability to stabilize high-oil-phase curcumin emulsions

BACKGROUND

Recent studies have shown that the wettability of protein-based emulsifiers is critical for emulsion stability. However, few studies have been conducted to investigate the effects of varying epigallocatechin gallate (EGCG) concentrations on the wettability of protein-based emulsifiers. Additionally, limited studies have examined the effectiveness of soy protein-EGCG covalent complex nanoparticles with improved wettability as emulsifiers for stabilizing high-oil-phase (≥ 30%) curcumin emulsions.

RESULTS

Soy protein isolate (SPI)-EGCG complex nanoparticles (SPIEn) with improved wettability were fabricated to stabilize high-oil-phase curcumin emulsions. The results showed that EGCG forms covalent bonds with SPI, which changes its secondary structure, enhances its surface charge, and improves its wettability. Moreover, SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) exhibited a better three-phase contact angle (56.8 ± 0.3o) and zeta potential (-27 mV) than SPI. SPIEn-2.0 also facilitated the development of curcumin emulsion gels at an oil volume fraction of 0.5. Specifically, the enhanced network between droplets as a result of the packing effects and SPIEn-2.0 with inherent antioxidant function was more effective at inhibiting curcumin degradation during long-term storage and ultraviolet light exposure.

CONCLUSION

The results of the present study indicate that SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) comprises the optimum conditions for fabricating emulsifiers with improved wettability. Additionally, SPIEn-0.2 can improve the physicochemical stability of high-oil-phase curcumin emulsions, suggesting a novel strategy to design and fabricate high-oil-phase emulsion for encapsulating bioactive compounds. © 2024 Society of Chemical Industry.

Food-packaging applications and mechanism of polysaccharides and polyphenols in multicomponent protein complex system: A review

With the increasingly mature research on protein-based multi-component systems at home and abroad, the current research on protein-based functional systems has also become a hot spot and focus in recent years. In the functional system, the types of functional factors and their interactions with other components are usually considered to be the subjective factors of the functional strength of the system. Because this process is accompanied by the transfer of protons and electrons in the system, it has antioxidant, antibacterial and anti-inflammatory properties. Polyphenols and polysaccharides have the advantages of wide source, excellent functionality and good compatibility with proteins, and have become excellent and representative functional factors. However, polyphenols and polysaccharides are usually accompanied by poor stability, poor solubility and low bioavailability when used as functional factors. Therefore, the effect of separate release and delivery will inevitably lead to non-significant or direct degradation. After forming a multi-component composite system with the protein, the functional factor will form a stable system driven by hydrogen bonds, hydrophobic forces and electrostatic forces between the functional factor and the protein. When used as a delivery system, it will protect the functional factor, and when released, through the specific recognition of the cell membrane receptor signal, the effect of fixed-point delivery is achieved. In addition, this multi-component composite system can also form a functional composite film by other means, which has a long-term significance for prolonging the shelf life of food and carrying out specific antibacterial.

Pea protein/carboxymethyl cellulose complexes prepared using a pH cycle strategy as stabilizers of high internal phase emulsions for 3D printing

The development of food-grade high internal phase emulsions (HIPEs) for 3D printing and the replacement of animal fats have attracted considerable attention. In this study, in order to improve the rheological properties and stability of pea protein to prepare HIPE, pea protein/carboxymethyl cellulose (pH-PP/CMC) was prepared and subjected to pH cycle treatment to produce HIPEs. The results showed that pH cycle treatment and CMC significantly reduced the droplet size of HIPEs (from 143.33 to 12.10 μm). At higher CMC concentrations, the interfacial tension of the PP solution decreased from 12.84 to 11.71 mN/m without pH cycle treatment and to 10.79 mN/m with pH cycle treatment. The HIPEs with higher CMC concentrations subjected to pH cycle treatment showed shear thinning behavior and higher viscoelasticity and recovered their solid-like properties after being subjected to 50 % strain, indicating that they could be used for 3D printing. The 3D printing results showed that the pH-PP/CMC HIPE with 0.3 % CMC had the finest structure. Our work provides new insights into developing food-grade HIPEs and facilitating their use in 3D printing inks as nutrient delivery systems and animal fat substitutes.

High internal phase Pickering emulsions stabilized by the complexes of ultrasound-treated pea protein isolate/mung bean starch for delivery of β-carotene

High internal phase Pickering emulsions (HIPPEs) stabilized by edible colloid particles have gained great interest. In this study, ultrasound-treated pea protein isolate and mung bean starch complexes (UPPI/MS) were prepared and used in stabilization of HIPPEs. The emulsifying properties of UPPI/MS were found to be superior to those of pea protein isolate (PPI), as evidenced by a smaller particle size and higher surface hydrophobicity. HIPPEs stabilized by UPPI/MS displayed a higher viscoelastic and gel-like structure. Low-Field NMR (LF-NMR) revealed that HIPPEs stabilized by UPPI60/MS (UPPI60/MS-HIPPEs) showed better ability to restrict the mobility of water. UPPI60/MS-HIPPEs also revealed the best environmental stability attributed a stronger three-dimensional network structure. Encapsulation of β-carotene within HIPPEs resulted in improving stability, with UPPI60/MS-HIPPEs exhibiting the highest retention rate of 73.58 %. Moreover, β-carotene encapsulated in HIPPEs displayed enhanced bioaccessibility, with UPPI60/MS-HIPPEs achieving the highest value of 25.37 %. This research highlighted the potential of UPPI60/MS complexes as effective stabilizers for HIPPEs and provided new insights on HIPPEs in nutrient delivery systems.

The present state and future outlook of pectin-based nanoparticles in the stabilization of Pickering emulsions

The stabilization of Pickering emulsions using micro/nanoparticles has gained significant attention due to their wide range of potential applications in industries such as cosmetics, food, catalysis, tissue engineering, and drug delivery. There is a growing demand for the development of environmentally friendly micro/nanoparticles to create stable Pickering emulsions. Naturally occurring polysaccharides like pectin offer promising options as they can assemble at oil/water interfaces. This polysaccharide is considered a green candidate because of its biodegradability and renewable nature. The physicochemical properties of micro/nanoparticles, influenced by fabrication methods and post-modification techniques, greatly impact the characteristics and applications of the resulting Pickering emulsions. This review focuses on recent advancements in Pickering emulsions stabilized by pectin-based micro/nanoparticles, as well as the application of functional materials in delivery systems, bio-based films and 3D printing using these emulsions as templates. The effects of micro/nanoparticle properties on the characteristics of Pickering emulsions and their applications are discussed. Additionally, the obstacles that currently hinder the practical implementation of pectin-based micro/nanoparticles and Pickering emulsions, along with future prospects for their development, are addressed.

General approaches to biopolymer-based Pickering emulsions

Pickering emulsion is a type of emulsion that uses solid particles or colloidal particles as emulsifiers rather than surfactants to adhere at oil-water interface. Pickering emulsions have gathered significant research attention recently due to their excellent stability and wide range of potential uses compared to traditional emulsions. Major advancements have been made in development of innovative Pickering emulsions using different colloidal particles by various techniques including homogenization, emulsification and ultrasonication. Use of biopolymer particles gives Pickering emulsions a more escalating possibilities. In this review paper, we seek to present a critical overview of development in food-grade particles that have been utilized to create Pickering emulsions with a focus on techniques and application of Pickering emulsions. Particularly, we have evaluated protein, lipid, polysaccharide-based particles and microalgal proteins that have emerged in recent years with respect to their potential to stabilize and add novel functionalities to Pickering emulsions. Some preparation methods of Pickering emulsions in brief, applications of Pickering emulsions are also highlighted. Encapsulation and delivery of bioactive compounds, fat substitutes, film formation and catalysis are potential applications of Pickering emulsions. Pickering double emulsions, nutraceutical and bioactive co-delivery, and preparation of porous materials are among research trends of food-grade Pickering emulsions.

Bovine serum albumin-liposome stabilized high oil-phase emulsion: Effect of liposome ratio on interface properties and stability

This study aimed to solve the issue of poor lipophilicity of natural bovine serum albumin (BSA) by combining with liposomes (Lips) to stabilize high oil-phase emulsions (HOPEs). The interaction between BSA and Lips was mainly driven by hydrophobic forces, followed by hydrogen bonding. The secondary structure and tertiary structure of BSA were characterized and indicated that the addition of Lips promoted the structural expansion of BSA exposing the hydrophobic groups inside. Interfacial adsorption behaviours were assessed through dynamic interfacial tension, three-phase contact angle, and quartz crystal microbalance with dissipation. These results indicated that BSA-Lips crosslinking improved wettability, promoting adsorption and rearrangement at the oil-water interface, thereby resulting in a dense interfacial layer. The emulsifying efficacy of BSA-stabilized HOPEs also displayed a distinct Lips dependency. Varying the BSA-to-Lips ratio transformed their consistency from flowing to semi-solid, reinforcing the gel network. Under optimal conditions (BSA: Lips = 1:1), the droplet size of BSA-Lips stabilized HOPEs reached a minimum with a highly uniform distribution. Moreover, a 1:1 BSA to Lips ensured outstanding storage, thermal, and centrifugal stability for the HOPEs. This work provides valuable references for the interaction between protein and Lips, guiding the development of highly stable HOPEs stabilizers.

The aggregation behavior between soybean whey protein and polysaccharides of diverse structures and their implications in soybean isoflavone delivery

The use of polysaccharides to recover soybean whey protein (SWP) from whey wastewater is recognized as an effective approach. However, the recovery rate can vary due to differences in the structure and compound ratios of the polysaccharides involved. The interaction between SWP and polysaccharides (sodium alginate, SA; chitosan, CHI; carrageenan, CAR) at different ratio was investigated. We harnessed these complexes to fabricate emulsions aimed at delivering soybean isoflavones. The results showed that the addition of polysaccharides unfolded the structure of SWP. The intermolecular hydrogen bonds within SWP-SA were stronger than those of the other complexes. These structural changes showed consistency across different ratios. The mean particle size of the complexes increased. SWP-SA exhibited the lowest interfacial tension. The emulsion with SWP-SA at 300 W demonstrated superior stability, and the bioavailability of soybean isoflavones increased by 3-6 %. These results shed light on the promising potential of polysaccharide-based strategies for SWP recovery and the effective delivery of soybean isoflavones.

Ultra-stable pickering emulsion stabilized by anisotropic pea protein isolate-fucoidan conjugate particles through Maillard reaction

Bio-based emulsifiers hold significant importance in various industries, particularly in food, cosmetics, pharmaceuticals and other related fields. In this study, pea protein isolate (PPI) and fucoidan (FUD) were conjugated via the Maillard reaction, which is considered safe and widely used in the preparation of food particle. The PPI-FUD conjugated particles exhibit an anisotropic non-spherical structure, thereby possessing a high detachment energy capable of preventing emulsion coalescence and Ostwald ripening. Compared to emulsions previously prepared in other studies (< 500 mM), the Pickering emulsion stabilized by PPI-FUD conjugate particles demonstrates outstanding ionic strength resistance (up to 5000 mM). Furthermore, when encapsulating curcumin, the Pickering emulsion protects the curcumin from oxidation. Additionally, the formulated emulsions demonstrated the capability to incorporate up to 60 % (v/v) oil phase, revealing remarkable performance in terms of storage stability, pH stability, and thermal stability.

Effect of pectin concentration on emulsifying properties of black soldier fly (Hermetia illucens) larvae albumin modified by pH-shifting and ultrasonication

The effect of pectin concentration on the structural and emulsifying properties of black soldier fly larvae albumin (BSFLA) modified by pH-shifting (pH12) and ultrasound (US) was studied. The results (intrinsic fluorescence, surface hydrophobicity, Fourier transform infrared spectrum, and disulfide bonds) showed that modified BSFLA samples, especially pH12-US, were more likely to bind to pectin through hydrogen bonding, electrostatic interactions, and hydrophobic interactions due to the unfolding of BSFLA, the collapse of disulfide bonds and exposure of hydrophobic groups. Thus, a BSFLA-pectin complex with smaller particle size, more negative charges, and a relatively loose structure was formed. The emulsifying activity (EAI) and stability index (ESI) of pH12-US modified BSFLA were significantly enhanced by the addition of pectin, reaching the highest values (associated with 174.41 % and 643.22 % increase, respectively) at pectin concentration of 1.0 %. Furthermore, the interface modulus of the emulsion prepared by the modified BSFLA was mainly viscous, and had higher apparent viscosity, smaller particle size and droplet size, contributing to higher EAI and ESI. The study findings suggest the addition of pectin to pH12-US treated BSFLA could be used in industry to prepare BSFLA-pectin emulsion with exceptional/desirable properties.

A review of high internal phase Pickering emulsions: Stabilization, rheology, and 3D printing application

High internal phase Pickering emulsion (HIPPE) is renowned for its exceptionally high-volume fraction of internal phase, leading to flocculated yet deformed emulsion droplets and unique rheological behaviors such as shear-thinning property, viscoelasticity, and thixotropic recovery. Alongside the inherent features of regular emulsion systems, such as large interfacial area and well-mixture of two immiscible liquids, the HIPPEs have been emerging as building blocks to construct three-dimensional (3D) scaffolds with customized structures and programmable functions using an extrusion-based 3D printing technique, making 3D-printed HIPPE-based scaffolds attract widespread interest from various fields such as food science, biotechnology, environmental science, and energy transfer. Herein, the recent advances in preparing suitable HIPPEs as 3D printing inks for various applied fields are reviewed. This work begins with the stabilization mechanism of HIPPEs, followed by introducing the origin of their distinctive rheological behaviors and strategies to adjust the rheological behaviors to prepare more eligible HIPPEs as printing inks. Then, the compatibility between extrusion-based 3D printing and HIPPEs as building blocks was discussed, followed by a summary of the potential applications using 3D-printed HIPPE-based scaffolds. Finally, limitations and future perspectives on preparing HIPPE-based materials using extrusion-based 3D printing were presented.

Lima bean (Phaseolus lunatus Linn.) protein isolate as a promising plant protein mixed with xanthan gum for stabilizing oil-in-water emulsions

BACKGROUND

Lima bean protein isolate (LPI) is an underutilized plant protein. Similar to other plant proteins, it may display poor emulsification properties. In order to improve its emulsifying properties, one effective approach is using protein and polysaccharide mixtures. This work investigated the structural and emulsifying properties of LPI as well as the development of an LPI/xanthan gum (XG)-stabilized oil-in-water emulsion.

RESULTS

The highest protein solubility (84.14%) of LPI was observed and the molecular weights (Mw ) of most LPI subunits were less than 35 kDa. The enhanced emulsifying activity index (15.97 m2  g-1 ) of LPI might be associated with its relatively high protein solubility and more low-Mw subunits (Mw  < 35 kDa). The effects of oil volume fraction (ϕ) on droplet size, microstructure, rheological behavior and stability of emulsions were investigated. As ϕ increased from 0.2 to 0.8, the emulsion was arranged from spherical and dispersed oil droplets to polyhedral packing of oil droplets adjacent to each other, while the LPI/XG mixtures changed from particles (in the uncrowded interfacial layer) to lamellae (in the crowded interfacial layer). When ϕ was 0.6, the emulsion was in a transitional state with the coexistence of particles and lamellar structures on the oil droplet surface. The LPI/XG-stabilized emulsions with ϕ values of 0.6-0.8 showed the highest stability during a 14-day storage period.

CONCLUSION

This study developed a promising plant-based protein resource, LPI, and demonstrates potential application of LPI/XG as an emulsifying stabilizer in foods. © 2023 Society of Chemical Industry.

Tunable rheological properties of high internal phase emulsions stabilized by phosphorylated walnut protein/pectin complexes: The effects of pH conditions, mass ratios, and concentrations

The current study reported high internal phase emulsions (HIPEs) stabilized by phosphorylated walnut protein/pectin complexes (PWPI/Pec) and elucidated how their rheological properties were modulated by pH conditions, mass ratios, and concentrations of the complexes. At pH 3.0, the HIPEs stabilized by PWPI/Pec exhibited smaller oil droplet sizes, as well as higher storage modulus (G') and flow stress, in comparison to those stabilized by the complexes formed at pH 4.0-6.0. These observations can be directly linked to pH-dependent changes in particle size, surface hydrophobicity, and wettability of the PWPI/Pec complexes. Rheological analysis revealed that all generated HIPEs displayed weak strain overshoot behavior, irrespective of pH conditions. Notably, HIPEs stabilized by PWPI/Pec at mass ratios of 2:1 and 4:1 showed enlarged oil droplet sizes, lower G' and flow stress but higher flow strain with unaffected loss factor compared to those stabilized by PWPI/Pec 1:1. However, reducing the concentration of PWPI/Pec led to a simultaneous decrease in G', flow stress, and flow strain, along with a significant increase in the loss factor of the HIPEs. Furthermore, the HIPEs formed with 1% PWPI/Pec 1:1 at pH 3.0 demonstrated excellent stability against heat treatment and long-term storage. These results provide valuable insights into the modulation of rheological characteristics of HIPEs and offer guidance for the application of walnut protein-based stabilizers in HIPE systems.

Preparations, application of polysaccharide-protein nanoparticles and their assembly at the oil-water interface

With the development of nanotechnology, nanoparticles have played an important role in pharmaceuticals, foods and materials, in particular, protein/polysaccharide based composite nanoparticles have received attention from researchers for safety and green production. This paper summarized in detail the preparation methods, applications of protein/polysaccharide nanoparticles (PPNPs) in recent years, especially the mechanism of stabilizing the oil-water interface. Currently, the polysaccharides applied are more traditional, such as chitosan, pectin and carboxymethyl cellulose, so there is still a lot of room for the development of raw materials that can be used to prepare PPNPs. Based on this, we also proposed three promising polysaccharides: seaweed polysaccharide, lycium barbarum polysaccharide and lactobacillus exopolysaccharides, describing their characteristics as well as their application prospects, this article can serve as a reference for interested researchers.

Correlationship between self-assembly behavior and emulsion stabilization of pea protein-high methoxyl pectin complexes treated with ultrasound at pH 2.0

This study investigated the effects of ultrasound on the self-assembly behavior of pea protein (PP)-high methoxyl pectin (HMP) complexes at pH 2.0 through transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and intrinsic fluorescence analysis. The emulsion stabilization mechanism of PP-HMP treated with ultrasound (PP-HMP-US) was also elucidated. The results indicated that ultrasound increased the emulsifying activity index (EAI) and emulsifying stability index (ESI) of PP-HMP. Moreover, PP-HMP-US-based emulsions formed small, dispersed oil drops, which were stable during storage. PP-HMP- and PP-HMP-US-based emulsions did not demonstrate any creaming. The TEM results revealed that ultrasound can regulate the self-assembly behavior of PP and HMP to form spherical particles with a core-shell structure. This structure possessed low turbidity, a small particle size, and high absolute zeta potential values. The FTIR and intrinsic fluorescence spectra demonstrated that ultrasound increased the α-helix and β-sheet contents and exposed the tryptophan groups to more hydrophilic environments. Ultrasound also promoted the PP-HMP self-assembly through electrostatic interaction and improved its oil-water interfacial behavior, as indicated by the EAI and ESI values of PP-HMP-US-based emulsions. The current results provide a reference for the development of an innovative emulsifier prepared by ultrasound-treated protein-pectin complexes at low pH.

Panax Notoginseng polysaccharide stabilized gel-like Pickering emulsions: Stability and mechanism

In this work, the polysaccharide from Panax Notoginseng (SPNP), a traditional herb in China, was used as an outstanding Pickering stabilizer to fabricate Pickering emulsions. The SPNP was characterized to be a porous network structure with a rough surface surrounded by some nanoparticles. Rheological measurement of the obtained Pickering emulsions demonstrated the formation of emulsion gels. Moreover, the emulsions exhibited excellent storage (14 days), pH (1.0-11.0), ionic strength (0-500 mM), and temperature (4-50 °C) stabilities. In addition, the Pickering emulsions showed a freeze-thaw stability, which is beneficial in food, cosmetic or biomedical applications when they may require freezing for storage and melting before use. Confocal laser scanning microscope (CLSM) and cryo-scanning electron microscopy (cryo-SEM) results showed that SPNPs effectively adsorbed at the oil-water interface by forming a compact three-dimensional (3D) network structure and multilayer anchoring on the surface of the emulsion droplets, thus inhibiting the droplet coalescence and flocculation. This study provides a kind of Pickering emulsions applicable in food, biomedical and cosmetic industries.

High internal phase Pickering emulsions stabilised by ultrasound-induced soy protein-β-glucan-catechin complex nanoparticles to enhance the stability and bioaccessibility of curcumin

AIMS

To evaluate the potential applications of soy protein-glucan-catechin (SGC) complexes prepared with different ultrasound times in stabilising high internal phase Pickering emulsion (HIPPE) and delivering curcumin.

METHODS

The SGC complexes were characterised by particle size, morphology, zeta potential, Fourier transform infra-red, and fluorescence spectroscopy. Formation and stability of curcumin emulsions were monitored by droplet size, microstructure, rheological property, lipid oxidation, and in vitro digestion.

RESULTS

Short-time ultrasound-induced complexes (SGC-U15) exhibited a small size and wettability of ∼82.5°. The chemical stability and bioaccessibility of curcumin was greatly improved by SGC-U15-stabilised HIPPEs, even after 70 days of storage, heating at 100 °C for 30 min, ultraviolet irradiation for 120 min, and in vitro digestion, owing to the formation of elastic gel-like structure at the oil/water interfaces.

CONCLUSION

Our findings may contribute to the design of emulsion-based delivery systems using ultrasound-induced protein-polysaccharide-polyphenol complexes.

Stabilization of ginger essential oil Pickering emulsions by pineapple cellulose nanocrystals

Pickering emulsions (PE) are systems made up of two incompatible fluids, these are stabilized by solid organic or inorganic particles located on their interface. Cellulose nanocrystals (CNCs) are sustainable and biocompatible value-added naturally occurring biomolecules which are being investigated as PE stabilizers in the cosmetic, food, and pharmaceutical industries. The objective of this research was to investigate the efficacy of pineapple cellulose nanocrystals as stabilizers for a ginger essential oil-in-water Pickering emulsion. Anionic pineapple cellulose nanocrystals were prepared by acid hydrolysis. Ginger essential oil-in-water emulsions were prepared by ultrasonication. Pineapple CNC produced stable Pickering emulsions with surface average droplet size of 4.3 μm-6.2 μm, high negative zeta potential, high viscosity, and high adsorption at the interface. Pickering emulsions by ultrasonication were stable against droplet coalescence, phase separation, and droplet flocculation for at least 8 weeks at 25 °C or 40 °C at various droplet sizes. The emulsion droplet size and volume density (droplet size distribution) were evaluated by varying the particle concentration (CNC 0.25 g/100 ml or 0.50 g/100 ml) and/or oil fraction (10-20 g/100 ml). At constant oil fraction, the emulsion viscosity increased as the nanocrystal concentration increased. The cellulose nanocrystal-stabilized ginger oil-Pickering emulsions exhibited shear-thinning characteristics of a pseudo-plastic fluid. Pineapple nanocellulose crystal -stabilized ginger oil-Pickering emulsions exhibited high stability with a creaming index of zero. CNC was found to be an effective Pickering stabilizer for oil-in-water emulsions in various food applications.

Intestine-targeted high internal phase Pickering emulsion formulated using silkworm pupa protein via ultrasonic treatment

High internal phase Pickering emulsions (HIPPEs) stabilized by food grade particles have received much attention as deliver vehicles for bioactives in recent years. In this study, ultrasonic treatment was conducted to regulate the size of silkworm pupa protein (SPP) particles, fabricating oil-in-water (O/W) HIPPEs with intestinal releasability. Briefly, the pretreated SPP and SPP-stabilized HIPPEs were characterized, and the targeting release was investigated using in vitro gastrointestinal simulations and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Results revealed ultrasonic treatment time was the key factor regulating emulsification performance and stability of HIPPEs. Optimized SPP particles were obtained based on their size and zeta potential of 152.67 nm and 26.77 mV, respectively. With ultrasonic treatment, the hydrophobic groups in the secondary structure of SPP were exposed, facilitating the formation of a stable oil-water interface for HIPPEs. Additionally, SPP-stabilized HIPPE showed high stable against the gastric digestion. The SPP with 70 kDa molecular weight, which was the major interfacial proteins of the HIPPE, can be hydrolyzed by intestinal digestive enzymes, enabling the intestine-targeted release of the emulsion. Overall, in the present study, a facile method was developed to stabilize HIPPEs using solo SPP with ultrasonic treatment to protect and deliver hydrophobic bioactive ingredients.

Understanding the structure, interfacial properties, and digestion fate of high internal phase Pickering emulsions stabilized by food-grade coacervates: Tracing the dynamic transition from coacervates to complexes

Although protein-polysaccharide complexes have shown tremendous potential in stabilizing high internal phase Pickering emulsions (HIPPEs), it is unclear whether coacervates have the same potential to be used as effective Pickering stabilizers. In this study, HIPPEs were prepared by ovalbumin (OVA)-pectin (PE) coacervates during the transition from coacervates to complexes. The results showed that enhanced OVA-PE interactions significantly affected the wettability and surface-tension reduction ability of the OVA-PE coacervates. At pH 2, the coacervate-stabilized HIPPEs exhibited smaller oil droplet sizes (21.3±2.3 μm), tighter droplet packing, and finer solid-like structures through the bridging of droplets and the generation of stronger gel-like network structures to prevent coalescence and lipid oxidation. The gastrointestinal digestion results proved that the OVA-PE coacervates promoted lipid hydrolysis and improved the bioaccessibility (from 19.7±0.7% to 36.5±2%) of curcumin-loaded HIPPEs. Our work provides new ideas for the development of biopolymer particles as effective Pickering stabilizers in the food industry.

Stability of glycosylated complexes loaded with Epigallocatechin 3-gallate (EGCG)

The application of Epigallocatechin-3-gallate (EGCG) in food industry was limited by its low stability in aqueous solutions and poor bioavailability in vivo. The novel EGCG glycosylated arachin nanoparticles (Ara-CMCS-EGCG) and EGCG glycosylated casein nanoparticles (Cas-CMCS-EGCG) were prepared to improve the stability and bioavailability of EGCG. The effect of different variables on the storage stability and the slow-release behavior of novel glycosylation complexes in nanoparticle background solution and artificial gastrointestinal fluid were investigated. The results showed that the DPPH scavenging activity of Ara-CMCS-EGCG and Cas-CMCS-EGCG were stable in temperature (25 ∼ 70 °C). EGCG could enhance the crosslinking effect of molecular particles in glycosylation complexes solution. The glycosylated protein nanoparticles were stable to acid-base and enzymolysis in simulated gastrointestinal fluid. The release rate of EGCG in simulated intestinal fluid was higher than that in simulated gastric fluid. The glycosylated protein carrier can not only release EGCG slowly, but also significantly improve the stability and bioavailability of EGCG in simulated gastrointestinal fluid.

Effect of polyphenolic structure and mass ratio on the emulsifying performance and stability of emulsions stabilized by polyphenol-corn amylose complexes

O/W emulsions stabilized by polyphenol/amylose (AM) complexes with several polyphenol/AM mass ratios and different polyphenols (gallic acid (GA), epigallocatechin gallate (EGCG) and tannic acid (TA)) were prepared by a high-intensity ultrasound emulsification technique. The effect of the pyrogallol group number of polyphenols and the mass ratio of polyphenols/AM on polyphenol/AM complexes and emulsions was studied. The soluble and/or insoluble complexes gradually formed upon adding polyphenols into the AM system. However, insoluble complexes were not formed in the GA/AM systems because GA has only one pyrogallol group. In addition, the hydrophobicity of AM could also be improved by forming polyphenol/AM complexes. The emulsion size decreased with increasing pyrogallol group number on the polyphenol molecules at a fixed ratio, and the size could also be controlled by the polyphenol/AM ratio. Moreover, all emulsions presented various degrees of creaming, which was restrained by decreasing emulsion size or the formation of a thick complex network. The complex network was enhanced by increasing the ratio or pyrogallol group number on the polyphenol molecules, which was because the increasing number of complexes was adsorbed onto the interface. Altogether, compared to GA/AM and EGCG/AM, the TA/AM complex emulsifier had the best hydrophobicity and emulsifying properties, and the TA/AM emulsion had the best emulsion stability.

Structural properties of pea proteins (Pisum sativum) for sustainable food matrices

Pea proteins are widely used as a food ingredient, especially in sustainable food formulations. The seed itself consists of many proteins with different structures and properties that determine their structure-forming properties in food matrices, such as emulsions, foams, and gels. This review discusses the current insights into the structuring properties of pea protein mixtures (concentrates, isolates) and the resulting individual fractions (globulins, albumins). The structural molecular features of the proteins found in pea seeds are discussed and based on this information, different structural length scales relevant to foods are reviewed. The main finding of this article is that the different pea proteins are able to form and stabilize structural components found in foods such as air-water and oil-water interfaces, gels, and anisotropic structures. Current research reveals that each individual protein fraction has unique structure-forming properties and that tailored breeding and fractionation processes will be required to optimize these properties. Especially the use of albumins, globulins, and mixed albumin-globulins proved to be useful in specific food structures such as foams, emulsions, and self-coacervation, respectively. These new research findings will transform how pea proteins are processed and being used in novel sustainable food formulations in the future.

Novel Colloidal Food Ingredients: Protein Complexes and Conjugates

Food proteins, polysaccharides, and polyphenols are natural ingredients with different functional attributes. For instance, many proteins are good emulsifiers and gelling agents, many polysaccharides are good thickening and stabilizing agents, and many polyphenols are good antioxidants and antimicrobials. These three kinds of ingredients can be combined into protein, polysaccharide, and/or polyphenol conjugates or complexes using covalent or noncovalent interactions to create novel multifunctional colloidal ingredients with new or improved properties. In this review, the formation, functionality, and potential applications of protein conjugates and complexes are discussed. In particular, the utilization of these colloidal ingredients to stabilize emulsions, control lipid digestion, encapsulate bioactive ingredients, modify textures, and form films is highlighted. Finally, future research needs in this area are briefly proposed. The rational design of protein complexes and conjugates may lead to the development of new functional ingredients that can be used to create more nutritious, sustainable, and healthy foods.

In situ polyphenol-adhesive hydrogel enhanced the noncarcinogenic repairing of KGF on the gut epithelial barrier on TNBS-induced colitis rats

Ulcerative colitis (UC) is a chronic recurrent disease affecting the gastrointestinal tract especially colorectum. Keratinocyte growth factor (KGF) plays the vital roles in maintaining the colonic mucosal barrier. The poor stability and off-target of KGF were two hindering factors for its clinical application. Herein, in situ hydrogel (PE) with mucoadhesive ability was constructed by using temperature-sensitive poloxamer and EGCG as hydrogel-forming material and adhesive enhancer, respectively. Incorporation of EGCG led to the slight decrease of the gelled temperature and shortened the gelled time of PE hydrogel. When the concentration of EGCG is 0.1 %, PE hydrogel exhibits the suitable viscosity of 280 ± 20 Pa·s and the strong adhesive force of 725 ± 25 mN. KGF was soluble in cold PE solution to obtain KGF-loaded PE hydrogel (KGF@PE). PE hydrogel could improve the stability of KGF in vitro. KGF@PE not only could recover greatly the body weight of TNBS-induced rats but also repair their colonic morphology and goblet cell function. Moreover, the potential of repairing the epithelial barrier was indicated by upregulating tight junction proteins. Importantly, the safety of KGF@PE hydrogel for colitis was also confirmed on AOM/DSS-induced mice models. Conclusively, KGF@PE may be a promising therapeutic platform without obvious side effect for ulcerative colitis.

Biopolymer-based pickering high internal phase emulsions: Intrinsic composition of matrix components, fundamental characteristics and perspective

Pickering HIPEs have received tremendous attention in recent years due to their superior stability and unique solid-like and rheological properties. Biopolymer-based colloidal particles derived from proteins, polysaccharides and polyphenols have been demonstrated to be safety stabilizers for the construction of Pickering HIPEs, which can meet the demands of consumers for "all-natural" products and provide "clean-label" foods. Furthermore, the functionality of these biopolymers can be further extended by forming composite, conjugated and multi-component colloidal particles, which can be used to modulate the properties of the interfacial layer, thereby adjusting the performance and stability of Pickering HIPEs. In this review, the factors affecting the interfacial behavior and adsorption characteristics of colloidal particles are discussed. The intrinsic composition of matrix components and fundamental characteristics of Pickering HIPEs are emphatically summarized, and the emerging applications of Pickering HIPEs in the food industry are reviewed. Inspired by these findings, future perspectives concerning this field are also put forward, including (1) the exploration of the interactions between biopolymers used to produce Pickering HIPEs and target food ingredients, and the influence of the added biopolymers on the flavor and mouthfeel of the products, (2) the investigation of the digestion properties of Pickering HIPEs under oral administration, and (3) the fabrication of stimulus-responsive or transparent Pickering HIPEs. This review will give a reference for exploring more natural biopolymers for Pickering HIPEs application development.

Fabrication, Characterization, and Emulsifying Properties of Complex Based on Pea Protein Isolate / Pectin for the Encapsulation of Pterostilbene

In this study, pectin (PEC) and pea protein isolate(PPI) was successfully used to create complexes as a novel delivery system for pterostilbene (PT). When the mass ratio of PEC to PPI was 0.5, the particle size and ζ-potential of PPI-PEC-PT were 119.41 ± 5.68 nm and -23.26 ± 0.61 mV, respectively, and the encapsulation efficiency (EE) of PT was 90.92 ± 2.08%. The photochemical stability of PT was enhanced after encapsulation. The results of the molecular docking and multispectral analysis demonstrated that the PPI and PT binding was spontaneous and mostly fueled by hydrophobic interactions. The hydrophobicity of PPI was significantly decreased and the emulsification activity and emulsion stability were significantly improved after production with PEC and PT. The best emulsification impact was demonstrated by the PPI-PEC-PT complex. PPI-PEC is an effective PT delivery material, and the PPI-PEC-PT complex is a new functional emulsification material with significant potential in liquid and semi-liquid food and health products.

Adsorption and Assembly of Octenyl Succinic Anhydride Starch/Chitosan Electrostatic Complexes at Oil-Water Interface

Biopolymer electrostatic complexes are popular Pickering stabilizers whose structures greatly affect their interfacial properties. This study comprehensively demonstrated the interfacial adsorption and assembly of dissolved octenyl succinic anhydride (OSA) starch (OSA-D)/chitosan (CS) electrostatic complexes with different structures through complementary characterization methods. We found that compared with single-component systems, OSA-D/CS complexes exhibited significantly increased wetting stability and adsorption rate to the interface, which was reinforced by molecular dynamics simulations. Their soft structures and the entanglement of molecular chains led to the formation of thick and highly viscoelastic multilayer adsorbed films, which greatly resisted deformation against shearing forces. The adsorption and assembly of the complexes were strongly influenced by OSA-D/CS ratios and pH, which could be related to the different interfacial interaction strengths. Overall, the electrostatic complexation, structural characteristics, and interfacial properties of OSA-D/CS complexes were well related, thereby providing valuable information for the regulation of controlled interfaces and bulk system properties.

An "intelligent -responsive" bactericidal system based on OSA-starch Pickering emulsion

Pickering emulsion based on OSA-starch was developed in this study as an intelligent delivery system for the application of thymol against foodborne pathogens. Morphology and microstructure characterization showed that the Pickering emulsion was an O/W type emulsion and stayed stable at starch concentration of 200 mg/mL and oil fraction at 30 % with particle size of 10 μm and absolute Zeta potential of -12.5 mV. Low field nuclear magnetic resonance and rheology experiments indicated that a denser network structure was formed in this stable Pickering emulsion. Besides, the Pickering emulsion could endure long-time storage, low pH (3,5) and additional NaCl (50, 100, 200, 400 mM) and it showed enhanced bactericidal effects against Escherichia coli, Staphylococcus aureus (thymol =1.48 μmol/L) and Aspergillus flavus (thymol = 0.624 μmol/L) by inducing ROS eruption, membrane lipid peroxidation and cell shrink. Moreover, the bactericidal assay demonstrated that thymol could be intelligently released and a considerable 75 % timely bactericidal effect was detected after 9 days' intermittently exposing to E. coli, S. aureus and A. flavus in vitro, by comparison thymol alone showed only 20 % bactericidal effect due to its volatility. The results are of great importance to offer an intelligent delivery system of bio-actives defending foodborne pathogens.

Fabrication and characterization of gelatin-EGCG-pectin ternary complex: formation mechanism, emulsion stability, and structure

BACKGROUND

Protein-polyphenol-polysaccharide ternary complex particles have better emulsion interfacial stability compared to protein-polysaccharide binary complexes. However, knowledge is scarce when it comes to the fabrication of protein-polyphenol-polysaccharide ternary complexes as interfacial stabilizers and the interactions between the three substances. In the present work, ternary complexes were prepared using gelatin, high methoxyl pectin, and epigallocatechin gallate (EGCG) as raw materials. The effect of different influencing factors on the formation process of ternary complexes was investigated by varying different parameters. physicochemical stability, emulsifying properties, and structural characteristics were analyzed.

RESULTS

The ternary complex had a smaller particle size (275 nm) and polydispersity index (0.112) when the mass concentration ratio of gelatin to high methoxyl pectin was 9:1, addition of EGCG was 0.05%, pH value was 3.0, and ionic strength was 10 mmol L^-1 . Meanwhile, the complex had the highest emulsifying stability index (691.75 min) and emulsifying activity index (22.96 m²  g^-1 ). Scanning electron microscopical observation demonstrated that the addition of EGCG promoted the dispersion of ternary complex more uniformly, and effectively reduced the agglomeration phenomenon. The discrepancy in fluorescence intensity suggested that interactions between EGCG and gelatin occurred, which altered the protein spatial conformation of gelatin. Fourier transform infrared spectroscopic analysis elucidated that hydrogen bond interaction was the primary non-covalent interaction between EGCG and gelatin-high methoxyl pectin binary complex.

CONCLUSION

The aforementioned results purposed to provide some theoretical reference and basis for the rational design of stable protein-polyphenol-polysaccharide ternary complexes. © 2022 Society of Chemical Industry.

Protein-Based High Internal Phase Pickering Emulsions: A Review of Their Fabrication, Composition and Future Perspectives in the Food Industry

Protein-based high internal phase Pickering emulsions (HIPEs) are emulsions using protein particles as a stabilizer in which the volume fraction of the dispersed phase exceeds 74%. Stabilizers are irreversibly adsorbed at the interface of the oil phase and water phase to maintain the droplet structure. Protein-based HIPEs have shown great potential for a variety of fields, including foods, due to the wide range of materials, simple preparation, and good biocompatibility. This review introduces the preparation routes of protein-based HIPEs and summarizes and classifies the preparation methods of protein stabilizers according to their formation mechanism. Further outlined are the types and properties of protein stabilizers used in the present studies, the composition of the oil phase, the encapsulating substances, and the properties of the constituted protein-based HIPEs. Finally, future development of protein-based HIPEs was explored, such as the development of protein-based stabilizers, the improvement of emulsification technology, and the quality control of stabilizers and protein-based HIPEs.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Optimization of Pea Protein Isolate-Stabilized Oil-in-Water Ultra-Nanoemulsions by Response Surface Methodology and the Effect of Electrolytes on Optimized Nanoemulsions

Nanoemulsions are optically transparent and offer good stability, bioavailability, and control over the targeted delivery and release of lipophilic active components. In this study, pea protein isolate (PPI)-stabilized O/W nanoemulsions were evaluated using response surface methodology to obtain optimized ultra-nanoemulsions of Sauter mean diameter (D3,2) < 100 nm using a high-pressure homogenizer (HPH). Furthermore, the effect of food matrix electrolytes, i.e., the pH and ionic strength, on the emulsion (prepared at optimized conditions) was investigated. The results revealed that the droplet size distribution of emulsions was mainly influenced by the PPI concentration and the interaction of oil concentration and HPH pressure. Moreover, a non-significant increase in droplet size was observed when the nanoemulsions (having an initial D3,2 < 100 nm) were stored at 4 °C for 7 days. Based on the current experimental design, nanoemulsions with a droplet size < 100 nm can effectively be prepared with a high PPI concentration (6.35%), with less oil (1.95%), and at high HPH pressure (46.82 MPa). Such emulsions were capable of maintaining a droplet size below 100 nm even at ionic conditions of up to 400 mM NaCl and at acidic pH.

Formation, Structure and stability of high internal phase Pickering emulsions stabilized by BSPI-C3G covalent complexes

•

The HIIPPE was stabilized by BSPI-C3G covalent particles.

•

HIPPEs stabilized with 74% (v/v) oil phase fraction have a stable gel-like state.

•

HIPPEs stability was the best with the 3 % (w/v) BSPI-C3G particle concentration.

Food-grade high internal phase Pickering emulsions (HIPPEs) are stabilized by protein-based particles, which have attracted extensive attention due to their good gel-like structure. The black soybean isolate protein/cyanidin-3-O-glucoside (BSPI-C3G) covalent particles were used as a particulate emulsifier to form stable HIPPEs with oil phase fractions (74 % v/v) and low particle concentrations (0.5 %–3 % w/v) The particle size distribution and microstructure demonstrated that the BSPI-C3G covalent particles acted as an interfacial layer and surrounded the oil droplets. As the concentration of BSPI-C3G particles increased from 0.5 % to 3 %, the droplet size, elasticity, antioxidant capacity of the heated or stored HIPPEs more stable. So, the HIPPEs had the best stability with the BSPI-C3G particle at 3 % (w/v) concentration. These findings may extend the application of BSPI and C3G in foods and provide the guidelines for the rational design of food-grade HIPPEs stabilized by protein/anthocyanin complexes.

Design and structural characterization of edible double network gels based on wheat bran arabinoxylan and pea protein isolate

Double network (DN) gels based on wheat bran arabinoxylan (WBAX) and pea protein isolate (PPI) were fabricated by a two-step sequential gelation method with laccase catalyzed cross-linking followed by heating. The rheological properties, water holding capacity, microstructure and molecular structure of WBAX/PPI DN gels were investigated. Increasing the concentrations of WBAX and PPI contributed to an enhanced viscoelastic modulus of DN gel, which exhibited an interconnected, bicontinuous and compact structure with smaller pore sizes, as a result of higher cross-linking intensity of WBAX molecules. Low field nuclear magnetic resonance (LF-NMR) results showed that increasing the contents of PPI and WBAX could further restrict the water mobility within DN gel, which was beneficial for enhancing the water holding capacity of gel samples. The molecular structure analysis showed that the crosslinking of WBAX-WBAX, PPI-PPI and WBAX-PPI participated in the formation of WBAX-PPI DN gels.