Antibacterial chitosan composite films with food-inspired carbon spheres immobilized AgNPs

Rapid synthesis of ferulic acid-derived lignin coated silver nanoparticles with low cytotoxicity and high antibacterial activity

Antibiotic resistance and the rise of untreatable bacterial infections pose severe threats to human health. Silver nanoparticles (AgNPs) have emerged as a promising antibacterial solution due to their broad-spectrum effectiveness. However, their relatively high cytotoxicity has limited their widespread application. In this study, ferulic acid (FA) was used as a reducing agent, while silver oxide served as a silver precursor to rapidly prepare FA-derived lignin (FAL) coated AgNPs (AgNPs@FAL) with a size ranging from 34.8 to 77.1 nm. Density functional theory (DFT) calculations indicated that the coating of FAL endowed AgNPs@FAL with high stability, preventing the oxidation of AgNPs prior to antibacterial applications. Cell experiments further indicated that AgNPs@FAL exhibited lower cell toxicity (~80 % viability of normal kidney cells cultured at 25 μg/mL AgNPs@FAL) compared to fully exposed commercially available citrate-modified AgNPs (AgNPs@CA). Antibacterial experiments revealed that the minimum inhibitory concentrations (MIC) of AgNPs@FAL against E. coli and S. aureus were 12.5 μg/mL and 25 μg/mL, respectively, surpassing the antibacterial effect of AgNPs@CA, as well as ampicillin and penicillin. Additionally, AgNPs@FAL was capable of disrupting E. coli and S. aureus biofilm formation. This novel AgNPs@FAL formulation presents a promising antibacterial solution, addressing limitations observed in conventional drugs.

Dehydration-Toughing Dual-Solvent Gels with Viscoelastic Transition for Infectious Wound Treatment

The modulus of traditional biomedical hydrogels increases exponentially meditated by dehydration-stiffing mechanism, which leads to the failure of interface matching between hydrogels and soft tissue wounds. It is found in the study that the dual-solvent gels exhibit dehydration-toughening mechanism with the slowly increasing modulus that are always match the soft tissue wounds. Therefore, dual-solvent glycerol hydrogels (GCFen-gly DGHs) are prepared with hydrophobically modified catechol chitosan (hmCSC) and gelatin based on the supramolecular interactions. GCFen-gly DGHs exhibit excellent water retention capacity with a total solvent content exceeding 80%, permanent skin-like modulus within a range of 0.45 to 4.13 kPa, and stable photothermal antibacterial abilities against S, aureus, E. coli, as well as MRSA. Infectious full-thickness rat skin defect model and tissue section analysis indicate that GCFen-gly DGHs are able to accelerate infectious wound healing by alleviating the inflammatory response, promoting granulation tissue growth, re-epithelialization, collagen deposition, and vascular regeneration. As a result, GCFen-gly DGHs is expected to become the next-generation biological gel materials for infectious wound treatment.

Preparation and Application of Hemostatic Hydrogels

Hemorrhage remains a critical challenge in various medical settings, necessitating the development of advanced hemostatic materials. Hemostatic hydrogels have emerged as promising solutions to address uncontrolled bleeding due to their unique properties, including biocompatibility, tunable physical characteristics, and exceptional hemostatic capabilities. In this review, a comprehensive overview of the preparation and biomedical applications of hemostatic hydrogels is provided. Particularly, hemostatic hydrogels with various materials and forms are introduced. Additionally, the applications of hemostatic hydrogels in trauma management, surgical procedures, wound care, etc. are summarized. Finally, the limitations and future prospects of hemostatic hydrogels are discussed and evaluated. This review aims to highlight the biomedical applications of hydrogels in hemorrhage management and offer insights into the development of clinically relevant hemostatic materials.

Curcumin and silver nanoparticles loaded antibacterial multifunctional pectin/gelatin films for food packaging applications

Renewable biomass-based materials have a huge potential to replace petroleum-based products in food packaging. Herein, pectin/gelatin films loaded with curcumin and silver nanoparticles (AgNPs) are prepared by solution-pouring technology to serve as antimicrobial multifunctional food packaging films. AgNPs and curcumin are found to equally distribute in the films. Fourier transform infrared spectroscopy (FT-IR) reveal the hydrogen bonding and electrostatic interaction among curcumin, AgNPs, pectin and gelatin. The composite films show good antioxidant activity, mechanical performance, hydrophobicity and antibacterial ability. The films of P-GCA 0.5 showed 99.57 ± 0.16 % and 100 % inhibition against E. coli and S. aureus, respectively. The films also demonstrate excellent water vapor barrier qualities. In addition, the composite films possess pH-responsive color change behaviors from yellow (pH 3-8) to light red (pH 8-9) to dark red (pH 11-12), which is suitable for monitoring the freshness of shrimp packaging based on pH changes during deterioration process. As sustainable biomass-based materials, the multifunctional composite films are promising in intelligent food packaging applications.

Degradable chitosan-based bioplastic packaging: Design, preparation and applications

Food packaging is an essential part of food transportation, storage and preservation. Biodegradable biopolymers are a significant direction for the future development of food packaging materials. As a natural biological polysaccharide, chitosan has been widely concerned by researchers in the field of food packaging due to its excellent film-forming property, good antibacterial property and designability. Thus, the application research of chitosan-based food packaging films, coatings and aerogels has been greatly developed. In this review, recent advances on chitosan-based food packaging materials are summarized. Firstly, the development background of chitosan-based packaging materials was described, and then chitosan itself was introduced. In addition, the design, preparation and applications of films, coatings and aerogels in chitosan-based packaging for food preservation were discussed, and the advantages and disadvantages of each research in the development of chitosan-based packaging materials were analyzed. Finally, the application prospects, challenges and suggestions for solving the problems of chitosan-based packaging are summarized and prospected.

Biodegradable bio-film based on Cordyceps militaris and metal-organic frameworks for fruit preservation

In this study, Cordyceps militaris matrix was employed for the first time to fabricate a biodegradable food packaging. Carmine and Ag@CuBTC were introduced to cross-link with mycelium and were uniformly dispersed within the matrix to enhance the water resistance, antimicrobial, and antioxidant properties of the bio-films. The bio-film displayed high biodegradability, with nearly 100 % degradation achieved after three weeks. The bio-film exhibited exceptional resistance to oxidation (49.30 % DPPH and 93.94 % ABTS•+), as well as effective inhibitory capabilities against E. coli and S. aureus, respectively. The composite film maintained a high CO2/O2 selective permeability, which was advantageous for mitigating fruit metabolism and extending shelf life. Simultaneously, food preservation experiments confirmed that these bio-films can decelerate the spoilage of fruits and effectively prolong the shelf-life of food. The experimental findings indicated that the prepared Bio-R-Ag@Cu film held promise as an environmentally friendly biodegradable material for food packaging.

SERS detection of apramycin and kanamycin through sliver nanoparticles modified with β-cyclodextrin and α-iron oxide

Using sliver nanoparticles modified with β-cyclodextrin and α-iron oxide (β-CD/α-Fe2O3@AgNPs) as surface-enhanced Raman spectroscopy (SERS) substrate, two sensitive methods for detecting apramycin and kanamycin were established. The synthesized β-CD/α-Fe2O3@AgNPs were characterized through ultraviolet visible (UV-vis) spectroscopy, transmission electron microscope (TEM), X-ray diffraction (XRD) and thermogravimetric analyses (TGA). The interactions of the two drugs and substrate were researched by UV-vis absorption and fourier transform infrared (FT-IR). The linear relationship between apramycin/kanamycin and SERS intensity was observed. The limits of detection (LODs) (S/N = 3) were 3.42 and 0.31 nmol/L. The two SERS methods were effectively applied to detect apramycin and kanamycin in beef samples and commercial injection. The recoveries were 96.84 - 102.20% with relative standard deviations (RSD) of 0.6---4.0% for apramycin and 95.67 - 103.18% with RSD of 1.4 - 2.5% for kanamycin, respectively.

Antibacterial Activity and Mechanism of Self-Assembly Spermidine-Capped Carbon Dots against Staphylococcus aureus

This paper investigated the antibacterial mechanism of spermidine-capped carbon dots (S-PCDs) against Staphylococcus aureus. The results showed that there were a large number of amino groups on the surface of S-PCDs and they had a high positive charge (+47.06 mV), which could be adsorbed on the negatively charged bacterial surface through electrostatic interaction and changed the permeability of the bacterial cell membrane. The extracellular protein and nucleic acid contents of S. aureus treated with S-PCDs were 5.4 and 1.2 times higher than those of the control group, respectively. The surface folds and defects of the bacterial cell membrane, and the leakage of cell contents were observed using SEM and TEM. The expression of metabolic oxidation regulatory genes dmpI, narJ and narK was upregulated and the intracellular ROS generation was induced, causing bacterial oxidative stress and eventually bacterial death. S-PCDs can effectively inhibit biofilm formation and had low cytotoxicity. The S-PCD treatment successfully inhibited microbial reproduction when pasteurized milk was stored at 25 °C and 4 °C. These results provide important insights into the antimicrobial mechanism of S-PCDs and lay the foundation for their application in the food field as a potentially novel bacteriostatic nanomaterial.

A signal-off photoelectrochemical sandwich-type immunosensor based on WO3/TiO2 Z-scheme heterojunction

A sandwich "signal-off" type photoelectrochemical (PEC) immunosensor was fabricated based on a composite heterojunction of tungsten oxide/titanium oxide microspheres (WO3/TiO2) acting as signal amplification platform and carbon microspheres loaded by gold nanoparticles (Cs@Au NPs) utilized as the label for detecting antibody. WO3/TiO2 had excellent photoelectric performance, and the results of Mott-Schottky plots, open-circuit voltage, and electron spin resonance spectroscopy indicated that it belonged to the Z-scheme heterojunction transfer mechanism of photogenerated carriers. To achieve the sensitization of PEC immunosensor, Cs@Au NP-labeled immunocomplex can effectively reduce the photocurrent signal. The PEC immunosensors were fabricated under the optimal conditions of 1:1 WO3/TiO2 (molar ratio), 2.0 mg mL-1 WO3/TiO2, and 1.5 mg mL-1 Cs@Au NPs. Through comparison of the detection results of label-free and sandwich-type PEC immunosensors for nucleocapsid (N) protein of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), we found that the sensitivity of the sandwich type was 2.53 times the label-free type, and the limit of detection was 0.006 ng mL-1, i.e., 3.17 times lower than the label-free type. This demonstrates that the developed sandwich-type PEC immunosensor will have a brighter application prospect.

Antioxidation Effect of Graphene Oxide on Silver Nanoparticles and Its Use in Antibacterial Applications

Silver nanoparticles (AgNPs) have drawn great attention due to their outstanding antibacterial effect in a wide range of applications, such as biomass packaging materials, wound dressings, flexible sensors, etc. However, the oxidation of AgNPs limits the antibacterial effect. Firstly, the effects of pretreatment methods on the antibacterial property of AgNPs were investigated by the shake flask method and agar diffusion plate method. Secondly, graphene oxide/silver nanoparticle (GO/AgNPs) nanocomposite prepared by an in-situ growth method was used as antibacterial filler for polyacrylate emulsion via a blending method. The antibacterial mechanism of GO/AgNPs was revealed by comparing the actual contents of oxygen with the theoretically calculated contents of oxygen. Finally, the polyacrylate/graphene oxide/silver nanoparticles (PA/GO/AgNPs) composite emulsion was applied onto a leather surface using a layer-by-layer spraying method to improve the leather's antibacterial properties. The results showed that ultraviolet irradiation could better maintain the antibacterial property of AgNPs, while GO could improve the dispersibility of AgNPs and prevent their oxidation. The leather finished with the PA/GO/AgNPs-2 wt% composite emulsion showed the highest bacteriostatic rate of 74%, demonstrating its great potential in the application of antibacterial leather products.

Fabrication of BODIPY/polyvinyl alcohol/alkaline lignin antibacterial composite films for food packing

Foodborne pathogens seriously endanger people's health and cause significant economic losses. Therefore, it is of great significance to design potent packaging materials with the function of alleviating food spoiling and extending shelf life. Here, three BODIPY derivatives (named as N-BDPI, B-BDPI and P-BDPI) were synthesized by substituting the 8-position of BODIPY with naphthalene, biphenyl and pyridine groups, respectively, and their photophysical properties as well as antibacterial capacities were characterized. The results demonstrated that N-BDPI had the best singlet oxygen generation ability and could completely kill S. aureus under light irradiation with the minimum inhibitory concentration of only 50 nmol/L. In addition, 1.0% BDPI@PVA/AL composite film was fabricated by doping N-BDPI into polyvinyl alcohol (PVA) and alkaline lignin (AL) exhibited high antibacterial activity on Gram-positive bacteria. The coating of strawberries with 1.0% BDPI@PVA/AL film not only effectively inhibited the mildew of strawberries, but also extended their shelf life.

Multifunctional Oxidized Dextran Cross-Linked Alkylated Chitosan/Drug-Loaded and Silver-Doped Mesoporous Bioactive Glass Cryogel for Hemostasis of Noncompressible Wounds

Noncompressible wounds resulting from accidents and gunshots are typically associated with excessive bleeding, slow wound healing, and bacterial infection. Shape-memory cryogel presents great potential in controlling the hemorrhaging of noncompressible wounds. In this research, a shape-memory cryogel was prepared using a Schiff base reaction between alkylated chitosan (AC) and oxidized dextran (ODex) and then incorporated with a drug-laden and silver-doped mesoporous bioactive glass (MBG). Hydrophobic alkyl chains enhanced the hemostatic and antimicrobial efficiency of the chitosan, forming blood clots in the anticoagulated condition, and expanding the application scenarios of chitosan-based hemostats. The silver-doped MBG activated the endogenous coagulation pathway by releasing Ca²⁺ and prevented infection through the release of Ag⁺. In addition, the proangiogenic desferrioxamine (DFO) in the mesopores of the MBG was released gradually to promote wound healing. We demonstrated that AC/ODex/Ag-MBG DFO(AOM) cryogels exhibited excellent blood absorption capability, facilitating rapid shape recovery. It provided a higher hemostatic capacity in normal and heparin-treated rat-liver perforation-wound models than gelatin sponges and gauze. The AOM gels simultaneously promoted infiltration, angiogenesis, and tissue integration of liver parenchymal cells. Furthermore, the composite cryogel exhibited antibacterial activity against Staphylococcus aureus and Escherichia coli. Thus, AOM gels show great promise for clinical translation in treating lethal, noncompressible bleeding and the promotion of wound healing.

A sensitive surface-enhanced Raman spectroscopy detection for gentamicin and tobramycin using γ-Al2O3-modified silver nanoparticles coated with bovine serum albumin as substrate

Two aminoglycoside antibiotics (AGs), gentamicin (GEN) and tobramycin (TOB), have good antibacterial activity against most pseudomonas aeruginosa and staphylococcus. The molecular structure of these drugs lack chromogenic groups, which brings challenges to their detection. In this project, the detecting methods for GEN and TOB utilizing surface-enhanced Raman spectroscopy (SERS) based on γ-Al₂O₃-modified silver nanoparticles (AgNPs) coated with bovine serum albumin (BSA) were established. The enhancement factors (EFs) of GEN and TOB were 2.44 × 10⁵ and 2.67 × 10⁶, respectively. The transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and spectrophotometric techniques were used to characterize the substrate and the combination of the substance with drugs. The pH, the addition amounts for the substrate and coagulant, as well as the mixing time were optimized. On the basis of single factor experiments, a more scientific response surface model was established. The concentrations of GEN and TOB showed good linear relationships with their Raman signals in the ranges of 6.67 × 10^-8 - 2.00 × 10^-6 and 6.67 × 10^-9 - 3.00 × 10^-7 mol L^-1 respectively. The limits of detection (LODs) were 11.88 and 1.26 nmol L^-1 for GEN and TOB, respectively. The methods were used successfully for the samples determination of the two AGs in commercial drugs and meat products.

Design of AgNPs doped chitosan/sodium lignin sulfonate/polypyrrole films with antibacterial and endotoxin adsorption functions

There is an urgent need to develop materials to prevent bacterial infection and the deleterious effects of endotoxins. In this study, we introduce a one-step electrodeposition method to prepare films composed of chitosan/Ag/polypyrrole and layer-by-layer self-assembly to introduce lignin sulphonate (LS) to obtain chitosan/Ag/polypyrrole/LS films. Antibacterial effects against both E. coli and S. aureus are shown by bacterial growth profiles and observation of bacteriostatic zones. Meanwhile, the addition of self-assembled LS improved the antibacterial effect of the film. For E. coli, the inhibition zone diameter was 0.93 cm, while for S. aureus, the inhibition zone diameter was 0.72 cm. Rapid and efficient endotoxin adsorption effects were shown whereby the electrostatic interactions between chitosan and endotoxin molecules played a major role. After adsorption for 1 h, in initial concentration of 1 EU/mL endotoxin solution, the adsorption efficiency could reach up to 85 %, while in initial concentration of 5 EU/mL endotoxin solution, the adsorption efficiency could reach up to 87.6 %. The results suggest chitosan/Ag/polypyrrole/LS films for their capability as a new type of antibacterial film with intrinsic endotoxin adsorption activity.

Azadirachta indica leaf extract mediated silver nanoparticles impregnated nano composite film (AgNP/MCC/starch/whey protein) for food packaging applications

In order to be used in food packaging, the study aims to develop a composite film based on microcrystalline cellulose (MCC) and coated with silver nanoparticles (AgNPs). The MCC was derived from sugar cane bagasse. Protein, starch, and poly-ethylene glycol 1500 (PEG-1500) are employed to improve the tensile strength, flexibility, and durability of the packaging film. The AgNPs was synthesized by a green route employing Azadirachtaindica leaf extract as reducing agent. The determined average crystallite size of AgNPs was seen at 20 nm. The X-ray diffraction (XRD) studies of the final film prepared have an elevated peak with a crystallinity of 37.5%. The scanning electron microscopic images (SEM) of the AgNPs and the prepared samples, reveal their surface morphology. The Fourier transform infrared spectroscopic studies (FT-IR) disclose the functional group changes during the film preparation. The antibacterial activity of the amalgamated AgNPs against five bacterial pathogens studied was found to be highly active against tested food pathogens, except for Proteus vulgari. When coated over a vegetable, the produced nanocomposite film displayed an increased shelf life for the vegetable by limiting the decay impact caused by food pathogens. According to the findings, the AgNPs-impregnated MCC/Starch/Whey protein has the potential to be employed as an antimicrobial packaging material.

Chemical modifications in the structure of marine polysaccharide as serviceable food processing and preservation assistant: A review

Marine polysaccharides are a kind of natural polysaccharides which isolated and extracted from marine organisms. Now some marine polysaccharides, such as chitosan, sodium alginate and agar, have been proven to exhibit antibacterial, antioxidant functions and biocompatibility, which are often used to preserve food or improve the physicochemical properties of food. However, they still have the defects of unsatisfactory preservation effect and biological activity, which can be remedied by its modification. Chemical modification is the most effective of all modification methods. The advances in common chemical modification methods of chitosan, sodium alginate, agar and other marine polysaccharides and research progress of modified products in food processing and preservation were summarized, and the influence of additional reaction conditions on the existence of chemical modification sites of polysaccharides was discussed. The modification of functional groups in natural marine polysaccharides leads to the change of molecular structure, which can improve the physical, chemical and biological properties of marine polysaccharides. Chemically modified products have been used in various fields of food applications, such as food preservatives, food additives, food packaging, and food processing aids. In general, chemical modification has excellent potential for food processing and preservation, which can improve the function of marine polysaccharides.

Double-Layered Films Based on Furcellaran, Chitosan, and Gelatin Hydrolysates Enriched with AgNPs in Yerba Mate Extract, Montmorillonite, and Curcumin with Rosemary Essential Oil

Double-layered active films based on furcellaran (1st layer—FUR), chitosan, and gelatin hydrolysates (2nd layer—CHIT+HGEL) were successfully prepared. Bioactive ingredients were added to the 1st film layer: AgNPs, which were synthesized in situ with yerba mate extract; montmorillonite clay (MMT); and different loads of ethanolic curcumin (CUR) extract enriched with rosemary essential oil (REO). SEM images confirmed the presence of AgNPs with a size distribution of 94.96 ± 3.33 nm throughout the films, and AFM and SEM photos indicated that the higher substance concentrations had rougher and more porous film microstructures. However, the water vapor transmission rate was reduced only at the lowest load of this ingredient. Despite the tensile strength of the films having decreased, the incorporation of the compounds showed a tendency towards reducing the modulus of elasticity, resulting in a lower stiffness of the composites. The addition of CUR and AgNPs improved the UV light barrier properties of the materials. The presented films showed quick reactions to changes in the pH value (from orange to red along with an increase in pH from 2 to 10), which indicates their potential use as indicators for monitoring the freshness of food products. Composite No. 2 showed the highest antimicrobial potential, while none of the presented films showed an antifungal effect. Finally, the antioxidant activities of the films increased dramatically at higher AgNP and CUR loads, suggesting an outstanding potential for active food packaging applications.

Unraveling the Antibiofilm Activity of a New Nanogold Resin for Dentures and Epithesis

Dentures and epitheses are mostly made from poly(methyl methacrylate) (PMMA), which does not show antimicrobial properties. They present reservoirs of microorganisms grown in biofilms. The aim of this study is to prepare a PMMA enriched with gold nanoparticles (AuNPs)-PMMA/AuNPs and the examination of its physical, mechanical and antimicrobial properties. The AuNPS were synthetized from HAuCl₄ using the ultrasonic spray pyrolysis method with lyophilization. The PMMA/AuNP samples were compared to PMMA samples. Density was measured by pycnometer. Microhardness was evaluated using the Vickers hardness test. Monomicrobial biofilm formation (Streptococcus mitis, Candida albicans, Staphylococcus aureus and Escherichia coli) was measured by colony-forming units (CFUs) and MTT test and visualized by SEM. AuNP release was measured indirectly (the CFUs of the medium around the sample). The density and microhardness of the PMMA/AuNPs were similar to those of the PMMA. CFU and MTT values for the biofilms formed on the PMMA for each of the tested species were higher than those of the biofilms formed on the PMMA/AuNPs. The CFUs of the medium around the sample were similar for both materials. PMMA/AuNPs showed a significant reduction in the monomicrobial biofilms of all tested species. AuNPs are not released from PMMA/AuNPs. Density, indirect measurement of residual monomer and dentures weight were similar between PMMA and PMMA/AuNPs. Microhardness, as a measure of the wear resistance, was also similar between tested discs.

Surface-Oxidized Polymer-Stabilized Silver Nanoparticles as a Covering Component of Suture Materials

In this work, we obtained silver nanoparticles stabilized with polyvinylpyrrolidone, ranging in size from 70 to 110 nm, which exhibits good crystallinity and anisotropic structure. For the first time, we studied the influence of the molar ratio of silver between silver and peroxide on the oxidation process of the nanoparticles and determined the regularities of this process by analyzing changes in absorption spectra. Our results showed that at molar ratios of Ag:H₂O₂ = 1:1 and 1:5, dependences of changes in the intensity, position and half-width of the absorption band of the plasmon resonance are rectilinear. In vivo studies of silver nanoparticles have shown that silver nanoparticles belong to the toxicity class III (moderately hazardous substance) and to the third group according to the degree of accumulation. We established that silver nanoparticles and oxidized silver nanoparticles form a uniform layer on the surface of the suture material. We found that the use of the suture material with silver nanoparticles and oxidized silver nanoparticles does not cause allergic reactions in the organisms of laboratory animals.

Oxidized dextran crosslinked polysaccharide/protein/polydopamine composite cryogels with multiple hemostatic efficacies for noncompressible hemorrhage and wound healing

Noncompressible hemorrhage caused by gunshots and sharp objects leads to higher trauma mortality, and cryogels have great potential in controlling noncompressible hemorrhage applications owing to their shape-memory properties. However, the use of non-toxic crosslinkers to prepare cryogels for noncompressible hemorrhage remains a challenge. In this study, a series of cryogels were prepared using oxidized dextran (ODex) as a biocompatible crosslinker, combined with the good hemostatic properties of chitosan (CS) and human-like collagen (HLC), and polydopamine nanoparticles (PDA-NPs) were also introduced to strengthen the shape recovery speed of the cryogels and further enhance their hemostatic performance. The CS/HLC/ODex/PDA-NPs (CHOP) cryogels presented a highly interconnected macroporous structure, powerful water/blood absorption capacity, robust mechanical performance, and rapid water/blood-triggered shape recovery. In vitro coagulation and coagulation mechanism tests showed that CHOP exhibited strong procoagulant ability, high adhesion to blood cells and fibrinogen, and the capacity to activate platelets and intrinsic pathways. In vivo hemostatic tests indicated that CHOP could effectively shorten the bleeding time and reduce the bleeding volume of liver incision bleeding and liver noncompressible hemorrhage. Meanwhile, CHOP exhibited good biocompatibility and biodegradability, and could promote wound healing. These results suggest that CHOP cryogels will be a promising hemostatic dressing.

Facile synthesis, characterization, antioxidant activity, and antibacterial activity of carboxymethyl inulin salt derivatives

A series of novel carboxymethyl inulin derivatives bearing thiosemicarbazide salts, aminoguanidine salts, and aniline salts were prepared via a facile method and employed to evaluate in vitro antioxidant activity and antibacterial activity. Their structures were characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The characterization results confirmed the successful synthesis of carboxymethyl inulin salt derivatives. The in vitro antioxidant activity evaluation results presented a significant improved superoxide radical scavenging ability, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability, and reducing ability of carboxymethyl inulin salt derivatives as compared to inulin and carboxymethyl inulin. In particular, the series of carboxymethyl inulin derivatives containing thiosemicarbazide salts and aminoguanidine salts showed remarkable free radical scavenging ability and reducing ability. Moreover, the carboxymethyl inulin derivatives containing thiosemicarbazide salts and aniline salts displayed potential antibacterial activity against Escherichia coli and Staphylococcus aureus bacteria. The cytotoxicity assay was also carried out on L929 cells by CCK-8 method, and all samples showed weak cytotoxicity. Furthermore, hemolysis results showed no hemolytic activity of most prepared inulin derivatives. In summary, the inulin derivatives containing thiosemicarbazide salts exhibited outstanding antioxidant activity, antibacterial activity, and biocompatibility, and the all-inclusive properties highlighted their potential use in food and medical applications.

One-pot biofabrication and characterization of Tara gum/Riceberry phenolics-silver nanogel: A cytocompatible and green nanoplatform with multifaceted biological applications

This work proposed a one-pot green route for the development of a biocompatible Tara gum-Riceberry phenolics‑silver nanosphere hybrid nanocomposite (TG/RiPE-SNG) with manifold biological potentialities. The reaction system comprised of AgNO₃ as nanosilver precursor, Riceberry phenolic extract as the green in situ reductant, and Tara gum as stabilizing and anchoring agent. TG/RiPE-SNG was extensively characterized using UV-vis spectroscopy, FTIR, RAMAN, TEM, FESEM, EDX, DLS/zeta potential, XRD, and TGA analyses. Small, stable, spherical, well-dispersed SNP with an average particle size of 13.01 nm and λ_max of 421 nm were synthesized in situ, and uniformly distributed within the gel-like TG/RiPE composite. The prepared nanocomposite demonstrated superior antibacterial properties (MIC of 12.5 μg/mL) against S. aureus and S. epidermidis compared to the gum or extract. Additionally, TG/RiPE-SNG exhibited strong light barrier, tyrosinase inhibitory and antioxidant functionalities. TG/RiPE-SNG also exhibited high stability at different pH and was more thermally stable relative to the plain TG/RiPE composite. Furthermore, TG/RiPE-SNG showed good biocompatibility towards mouse L929 fibroblasts and rat erythrocytes. The obtained findings revealed a simple, benign, and inexpensive approach using only natural ingredients for the preparation of gum-based biopolymer-nanosilver hybrid nanocomposite and underscored the strong attributes of TG/RiPE-SNP as a nanomaterial with desirable biomedical potentials.

High antibacterial activity of chitosan films with covalent organic frameworks immobilized silver nanoparticles

In this study, chitosan (CS) film containing covalent organic frameworks (COFs) immobilized silver nanoparticles (AgNPs) were developed for food packaging with improved antibacterial activities and film properties. COFs-AgNPs were fabricated via in-situ synthesis of immobilizing AgNPs on COFs. Transmission electron microscope, Zeta potential, X-ray diffraction, element mapping and Fourier transform infrared spectroscopy confirmed the successful fabrication of COFs-AgNPs, and COFs-AgNPs showed superior antibacterial activity against S. aureus and E. coli. Furthermore, the as-prepared COFs-AgNPs composite was further used to fabricate CS composite films (CS/COFs-AgNPs) by a solution casting method. The findings showed that the tensile strength of the nanocomposite films enhanced dramatically with the increase of the COFs-AgNPs content, while the UV-visible light barrier property, water swelling and solubility properties, and water vapor permeability (WVP) decreased significantly. Not only that, the CS/COFs-AgNPs nanocomposite films also showed outstanding antibacterial activity and effectively prolonged the storage time of white crucian carp (Carassius auratus). As a result, CS/COFs-AgNPs nanocomposite films show great potential in active food packaging.

Cellulose nanofibers aerogels functionalized with AgO: Preparation, characterization and antibacterial activity

In the experiment, a chemical oxidation method was used to prepare nano-divalent silver oxide powder with a particle size of about 10 nm. Compared with silver nanoparticles and monovalent silver compounds, nano‑silver oxide has better antibacterial properties. The cellulose antibacterial aerogel was prepared by combining it with cellulose nanofibrils and using freeze-thaw cycles and freeze-drying methods. The microscopic morphology, mechanical properties, in vitro release of silver ions, antibacterial properties and biodegradability of composite aerogels were studied. The porosity of the cellulose antibacterial aerogel can reach 94%, the swelling rate was greater than 1000%, and the pore size was between 13 and 15 nm, which showed a larger storage space and attachment site for the aerogel. The diameter of the inhibition zone of the aerogel against Escherichia coli and Staphylococcus aureus was 23 mm and 20 mm respectively, and the aerogels still exhibited significant antibacterial activities with more than 99.5% reductions in Escherichia coli and Staphylococcus aureus, which shows highly effective antibacterial properties. This research proposes an economical and novel preparation method of antibacterial cellulose aerogel, making it a candidate material with high efficiency, broad-spectrum antibacterial and more suitable for life needs.

Collagen/Chitosan Gels Cross-Linked with Genipin for Wound Healing in Mice with Induced Diabetes

Diabetes mellitus continues to be one of the most common diseases often associated with diabetic ulcers. Chitosan is an attractive biopolymer for wound healing due to its biodegradability, biocompatibility, mucoadhesiveness, low toxicity, and hemostatic effect. A panel of hydrogels based on chitosan, collagen, and silver nanoparticels were produced to treat diabetic wounds. The antibacterial activity, cytotoxicity, swelling, rheological properties, and longitudinal sections of hydrogels were studied. The ability of the gels for wound healing was studied in CD1 mice with alloxan-induced diabetes. Application of the gels resulted in an increase in VEGF, TGF-b1, IL-1b, and TIMP1 gene expression and earlier wound closure in a comparison with control untreated wounds. All gels increased collagen deposition, hair follicle repair, and sebaceous glands formation. The results of these tests show that the obtained hydrogels have good mechanical properties and biological activity and have potential applications in the field of wound healing. However, clinical studies are required to compare the efficacy of the gels as animal models do not reproduce full diabetes pathology.