Enhancing the water-solubility of curcuminoids-rich extract using a ternary inclusion complex system: Preparation, characterization, and anti-cancer activity

Orodispersible Dosage Forms with Rhinacanthin-Rich Extract as a Convenient Formulation Dedicated to Pediatric Patients

Rhinacanthins, derived from Rhinacanthus nasutus, widely used in traditional medicine, exhibit antifungal, anticancer, antiviral, antibacterial, and antiplatelet aggregation effects. Recently, their anti-diabetic activity was confirmed, which makes them an interesting natural alternative in the therapy of the early stage of diabetes mellitus. The aim of this study was to demonstrate the possibility of formulating orodispersible tablets (ODTs) and orodispersible films (ODFs) containing rhinacanthin-rich extract (RRE). Tablets with 50 mg or 100 mg of RRE were produced by direct compression. ODFs were manufactured by casting of Lycoat RS 720 or polyvinyl alcohol solution with RRE and additional excipients. The mechanical properties and disintegration times of the prepared formulations were studied. The effectiveness of taste masking was analyzed with an electronic tongue system. Six months simplified stability studies were performed in conditions complying to ICH guidelines. Appropriate friability of ODTs was achieved, despite low tensile strength (0.45-0.62 MPa). All prepared ODFs successfully met the acceptance criteria regarding Young's modulus, tensile strength, and elongation at break. The observed variations in their mechanical properties were dependent on the type and quantity of polymers and plasticizers used. Disintegration time of ODTs ranged from 38.7 s to 54.2 s, while for ODFs from 24.2 to 40 s in the pharmacopoeial apparatus. Analyses made with the electronic tongue showed the significant taste-masking effect in both formulations. The addition of sucralose as a sweetener and menthol with mint flavor as a taste-masking agent was sufficient to mask an RRE's taste in the case of ODTs and ODFs. Stability studies of ODTs packed in the PVC/Alu blisters showed a decrease in the RRE content below 90% after 6 months. However, ODFs with PVA were physicochemically stable for 6 months while being stored in Alu/Alu sachets. Our study proved for the first time the possibility of the formulation of orodispersible dosage forms with RRE, characterized by good mechanical properties, disintegration time, and appropriate taste masking.

Febuxostat ternary inclusion complex using SBE7-βCD in presence of a water-soluble polymer: physicochemical characterization, in vitro dissolution, and in vivo evaluation

Febuxostat (FBX), a potent xanthine oxidase inhibitor, is widely used as a blood uric acid-reducing agent and has recently shown a promising repurposing outcome as an anti-cancer. FBX is known for its poor water solubility, which is the main cause of its weak oral bioavailability. In a previous study, we developed a binary system complex between FBX and sulfobutylether-β-cyclodextrin (SBE7-βCD) with improved dissolution behavior. The aim of the current study was to investigate the effect of incorporating a water-soluble polymer with a binary system forming a ternary one, on further enhancement of FBX solubility and dissolution rate. In vivo oral bioavailability was also studied using LC-MS/MS chromatography. The polymer screening study revealed a marked increment in the solubility of FBX with SBE7-βCD in the presence of 5% w/v polyethylene glycol (PEG 6000). In vitro release profile showed a significant increase in the dissolution rate of FBX from FBX ternary complex (FTC). Oral in vivo bioavailability of prepared FTC showed more than threefold enhancement in Cmax value (17.05 ± 2.6 µg/mL) compared to pure FBX Cmax value (5.013 ± 0.417 µg/mL) with 257% rise in bioavailability. In conclusion, the association of water-soluble polymers with FBX and SBE7-βCD system could significantly improve therapeutic applications of the drug.

QbD Assisted Systematic Review for Optimizing the Selection of PVP as a Ternary Substance in Enhancing the Complexation Efficiency of Cyclodextrins: a Pilot Study

Inclusion complexes require higher concentration of Beta cyclodextrins (βCD) resulting in increased formulation bulk, toxicity, and production costs. This systematic review offers a comprehensive analysis using Quality by design (QbD) as a tool to predict potential applications of Polyvinylpyrrolidone (PVP) as a ternary substance to address issues of inclusion complexes. We reviewed 623 documents from 2013 to 2023 and Eighteen (18) research papers were selected for statistical and meta-analysis using the QbD concept to identify the most critical factors for selecting drugs and effect of PVP on inclusion complexes. The QbD analysis revealed that Molecular weight (MW), Partition coefficient (Log P), and the auxiliary substance ratio directly affected complexation efficiency (CE), thermodynamic stability in terms of Gibbs free energy (ΔG), and percent drug release. However, Stability constant (Ks) remained unaffected by any of these parameters. The results showed that low MW (250), median Log P (6), and a βCD: PVP ratio of 2:3 would result in higher CE, lower G, and improved drug release. PVP improves drug solubility, enhances delivery and therapeutic outcomes, and counteracts increased drug ionization due to decreased pH. In certain cases, its bulky nature and hydrogen bonding with CD molecules can form non-inclusion complexes. The findings of the study shows that there is potential molecular interaction between PVP and β-cyclodextrins, which possibly enhances the stability of inclusion complexes for drug with low MW and log P values less than 9. The systematic review shows a comprehensive methodology based on QbD offers a replicable template for future investigations into drug formulation research.

The Antitumoral Effect In Ovo of a New Inclusion Complex from Dimethoxycurcumin with Magnesium and Beta-Cyclodextrin

Breast cancer is one of the leading causes of death in the female population because of the resistance of cancer cells to many anticancer drugs used. Curcumin has cytotoxic activities against breast cancer cells, although it has limited use due to its poor bioavailability and rapid metabolic elimination. The synthesis of metal complexes of curcumin and curcuminoids is a relevant topic in the search for more active and selective derivatives of these molecular scaffolds. However, solubility and bioavailability are concomitant disadvantages of these types of molecules. To overcome such drawbacks, the preparation of inclusion complexes offers a chemical and pharmacologically safe option for improving the aqueous solubility of organic molecules. Herein, we describe the preparation of the inclusion complex of dimethoxycurcumin magnesium complex (DiMeOC-Mg, (4)) with beta-cyclodextrin (DiMeOC-Mg-BCD, (5)) in the stoichiometric relationship 1:1. This new inclusion complex's solubility in aqueous media phosphate buffer saline (PBS) was improved by a factor of 6x over the free metal complex (4). Furthermore, 5 affects cell metabolic rate, cell morphology, cell migration, induced apoptosis, and downregulation of the matrix metalloproteinase-2 (MMP-2) and matrix metalloproteinase-9 (MMP-9), interleukin-6 (IL-6), and signal transducer and activator of transcription-3 (STAT3) expression levels on MD Anderson metastasis breast-231 cancer (MDA-MB-231) cell lines. Results of an antitumor assay in an in ovo model showed up to 30% inhibition of tumor growth for breast cancer (MDA-MB-231) when using (5) (0.650 mg/kg dose) and 17.29% inhibition with the free homoleptic metal complex (1.5 mg/kg dose, (4)). While the formulation of inclusion complexes from metal complexes of curcuminoids demonstrates its usefulness in improving the solubility and bioavailability of these metallodrugs, the new compound (5) exhibits excellent potential for use as a therapeutic agent in the battle against breast cancer.

Curcuminoids-enriched extract and its cyclodextrin inclusion complexes ameliorates arthritis in complete Freund's adjuvant-induced arthritic mice via modulation of inflammatory biomarkers and suppression of oxidative stress markers

Curcuma longa extract and its marker curcuminoids have potential use in inflammatory conditions. However, curcuminoids solubility and bioavailability are major hindrances to their bioactivity. The current study investigated green extraction-based curcuminoids-enriched extract (CRE) prepared from C. longa and its cyclodextrin inclusion complexes, i.e., binary inclusion complexes (BC) and ternary inclusion complexes (TC), in complete Freund's adjuvant (CFA)-induced mice for their comparative anti-arthritic efficacy. CRE, BC, and TC (2.5 and 5 mg/kg) with the standard drug diclofenac sodium (13.5 mg/kg) were orally administered to mice for 4 weeks. Variations in body weight, hematological and biochemical parameters, along with gene expression analysis of arthritis biomarkers, were studied in animals. The histopathological analysis and radiographic examination of joints were also performed. CRE, BC and TC treatment significantly restored the arthritic index, histopathology and body weight changes. The concentration of C-reactive protein, rheumatoid factor and other liver function parameters were significantly recovered by curcuminoids formulations. The pro-inflammatory cytokines (NF-κB, COX-2, IL-6, IL-1β, and TNF-α) gene expression was considerably (p < 0.001) downregulated, while on the other side, the anti-inflammatory genes IL-4 and IL-10 were upregulated by the use of CRE and its complexes. The concentration of antioxidant enzymes was considerably (P < 0.001) recovered by CRE, BC and TC with marked decrease in lipid peroxidation, erosion of bone, inflammation of joints and pannus formation in comparison to arthritic control animals. Therefore, it is concluded that green CRE and its cyclodextrin formulations with enhanced solubility could be considered as an applicable therapeutic choice to treat chronic polyarthritis.

Stability-Enhanced Ternary Solid Dispersions of Glyburide: Effect of Preparation Method on Physicochemical Properties

Introduction

Limited aqueous solubility and subsequent poor absorption and low bioavailability are the main challenges in oral drug delivery. Solid dispersion is a widely used formulation strategy to overcome this problem. Despite their efficiency, drug crystallization tendency and poor physical stability limited their commercial use. To overcome this defect, ternary solid dispersions of glyburide: sodium lauryl sulfate (SLS) and polyethylene glycol 4000 (PEG), were developed using the fusion (F) and solvent evaporation (SE) techniques and subsequently evaluated and compared.

Materials and Methods

Physicochemical and dissolution properties of the prepared ternary solid dispersions were evaluated using differential scanning calorimetry (DSC), infrared spectroscopy (FTIR), and dissolution test. Flow properties were also assessed using Carr's index and Hausner's ratio. The physical stability of the formulations was evaluated initially and after 12 months by comparing dissolution properties.

Results

Formulations prepared by both methods similarly showed significant improvements in dissolution efficiency and mean dissolution time compared to the pure drug. However, formulations that were prepared by SE showed a greater dissolution rate during the initial phase of dissolution. Also, after a 12-month follow-up, no significant change was observed in the mentioned parameters. The results of the infrared spectroscopy indicated that there was no chemical interaction between the drug and the polymer. The absence of endotherms related to the pure drug from thermograms of the prepared formulations could be indicative of reduced crystallinity or the gradual dissolving of the drug in the molten polymer. Moreover, formulations prepared by the SE technique revealed superior flowability and compressibility in comparison with the pure drug and physical mixture (ANOVA, P  <  0.05).

Conclusion

Efficient ternary solid dispersions of glyburide were successfully prepared by F and SE methods. Solid dispersions prepared by SE, in addition to increasing the dissolution properties and the possibility of improving the bioavailability of the drug, showed acceptable long-term physical stability with remarkably improved flowability and compressibility features.

Curcumin Hybrid Lipid Polymeric Nanoparticles: Antioxidant Activity, Immune Cellular Response, and Cytotoxicity Evaluation

Poor solubility and short biological half-life present a challenge that needs to be overcome in order to improve the recognized bioactivities of curcumin (CUR), the main phenolic compounds derived from the roots of Curcuma longa. However, drug delivery systems have proven to be an excellent strategy to improve and obtain greater bioavailability. Our previous studies on curcuminoid hybrid nanoparticles have shown promising results by significantly increasing the solubility of desmethoxycurcumin (DMC) and bisdemethoxycurcumin (BDM). In this contribution, we performed a detailed characterization of a CUR as well as in vitro and in vivo studies. The developed method produced CUR loaded nanoparticles with an average size of 49.46 ± 0.80. Moreover, the FT-IR analysis confirmed the encapsulation, and TEM images showed their spherical shape. The NP achieved an encapsulation efficiency greater than 99%. Further, the release studies found that the NPs obtained a significantly higher release than the pure compounds in water. In vivo delayed-type hypersensitivity (DTH) studies showed promising results by enhancing the immune activity response of CUR in NP compared to bulk CUR. Furthermore, we report a significant increase in antioxidant activity for CUR-NP in aqueous solution compared to free CUR. Finally, an important in vitro cytotoxic effect on gastric AGS and colon SW620 adenocarcinoma cell lines was found for CUR-NP while empty carrier nanoparticles are observed to exhibit low cytotoxicity, indicating the potential of these CUR-PLU NPs for further studies to assess their phytotherapeutic applications.

A review of transglycosylated compounds as food additives to enhance the solubility and oral absorption of hydrophobic compounds in nutraceuticals and pharmaceuticals

Transglycosylation has been used to modify the physicochemical properties of original compounds. As a result, transglycosylated compounds can form molecular aggregates in size ranges of a few nanometers in an aqueous medium when their concentrations exceed a specific level. Incorporating these hydrophobic compounds has been observed to enhance the solubility of hydrophobic compounds into aggregate structures. Thus, this review introduces four transglycosylated compounds as food additives that can enhance the solubility and oral absorption of hydrophobic compounds. Here, transglycosylated hesperidin, transglycosylated rutin, transglycosylated naringin, and transglycosylated stevia are the focus as representative substances. Significantly, we observed that amorphous formations containing hydrophobic compounds with transglycosylated compounds improved solubility and oral absorption compared to untreated hydrophobic compounds. Moreover, combining transglycosylated compounds with hydrophilic polymers or surfactants enhanced the solubilizing effects on hydrophobic compounds. Furthermore, the enhanced solubility of hydrophobic compounds improved their oral absorption. Transglycosylated compounds also influenced nanoparticle preparation of hydrophobic compounds as a dispersant. This study demonstrated the benefits of transglycosylated compounds in developing supplements and nutraceuticals of hydrophobic compounds with poor aqueous solubility.

Differential neuroprotective effect of curcuminoid formulations in aluminum chloride-induced Alzheimer's disease

Alzheimer's disease (AD) is a slowly progressive brain degenerative disorder which gradually impairs memory, thinking, and ability to perform easy routine tasks. This degenerative disorder mainly targets the elderly people and has imposed an endemic burden on society. Hence, there is a crucial need to investigate the efficacious herbal pharmacotherapies that can effectively mitigate and prevent the pathological hallmarks of AD. The current study aims to explore the potential efficacy of curcuminoid-rich extract (CRE) and its ternary complex (TC). Experimental rodents were administered with AlCl₃ (300 mg/kg) to induce AD and treated with rivastigmine, curcuminoid crude extract, CRE, and TC orally for three consecutive weeks. Neurobehavioral, biochemical, and histopathological studies were performed from the last week of the study period. The mRNA expression of different pathological biomarkers was estimated by RT-qPCR analysis. The results of the study suggested that CRE and TC significantly improved the behavioral, biochemical parameters and acetylcholinesterase inhibitory activity in treatment groups. Histological analysis was also carried out indicating that the neurodegenerative changes and neuronal loss were stabilized by CRE and TC supplementation. CRE and TC supplementation remarkably downregulated the interleukin-1α, tumor necrosis factor-α, interleukin-1β, acetylcholinesterase, and β-secretase pathological gene expression. Hence, it was concluded that CRE and TC may act as promising candidates in the prevention of AD via numerous underlying signaling pathways.

Bovine Serum Albumin-Based Nanoparticles: Preparation, Characterization, and Antioxidant Activity Enhancement of Three Main Curcuminoids from Curcuma longa

Bovine Serum Albumin (BSA) lipid hybrid nanoparticles are part of the new solutions to overcome low bioavailability of poor solubility drugs such as curcuminoids, which possess multiple biological advantages; however, they are counterbalanced by its short biological half-life. In this line, we prepared the three main curcuminoids: curcumin (CUR), desmethoxycurcumin (DMC), and bisdemethoxycurcumin (BDM)-loaded BSA nanoparticles. The three formulations were characterized by the average size, size distribution, crystallinity, weight loss, drug release, kinetic mechanism, and antioxidant activity. The developed method produced CUR-, DMC-, and BDM-loaded BSA nanoparticles with a size average of 15.83 ± 0.18, 17.29 ± 3.34, and 15.14 ± 0.14 nm for CUR, DMC, and BDM loaded BSA, respectively. FT-IR analysis confirmed the encapsulation, and TEM images showed their spherical shape. The three formulations achieved encapsulation efficiency upper to 96% and an exhibited significantly increased release from the nanoparticle compared to free compounds in water. The antioxidant activity was enhanced as well, in agreement with the improvement in water release, obtaining IC₅₀ values of 9.28, 11.70, and 15.19 µg/mL for CUR, DMC, and BDM loaded BSA nanoparticles, respectively, while free curcuminoids exhibited considerably lower antioxidant values in aqueous solution. Hence, this study shows promises for such hybrid systems, which have been ignored so far, regarding proper encapsulation, protection, and delivery of curcuminoids for the development of functional foods and pharmaceuticals.

Integrating diverse plant bioactive ingredients with cyclodextrins to fabricate functional films for food application: a critical review

The popularity of plant bioactive ingredients has become increasingly apparent in the food industry. However, these plant bioactive ingredients have many deficiencies, including low water solubility, poor stability, and unacceptable odor. Cyclodextrins (CDs), as cyclic molecules, have been extensively studied as superb vehicles of plant bioactive ingredients. These CD inclusion compounds could be added into various film matrices to fabricate bioactive food packaging materials. Therefore, in the present review, we summarized the extraction methods of plant bioactive ingredients, the addition of these CD inclusion compounds into thin-film materials, and their applications in food packaging. Furthermore, the release model and mechanism of active film materials based on various plant bioactive ingredients with CDs were highlighted. Finally, the current challenges and new opportunities based on these film materials have been discussed.

Enhanced Antioxidant Activity of Fresh Fruits through Salicylic Acid/β-CD Hydroalcoholic Gels

Oxidation is an important cause of fruit spoilage, and therefore improving the antioxidant capacity of fresh fruits is beneficial to their preservation. Herein, fresh-cut bananas were used as a type of fresh fruit and soaked in 75% hydroalcoholic gels containing salicylic acid (SA) or SA/β-CD inclusion complex (SA/β-CD). After treatment, they were placed in an atmosphere at 85% relative humidity at 20 °C for 12 days. A significant reduction in spoilage in bananas treated with the hydroalcoholic gels in the presence of SA/β-CD was observed, compared with those treated with gels in the presence or absence of SA. The free-radical-scavenging performances of SA and its complex were investigated using the DPPH (1,1-diphenyl-2-picryl-hydrazil) method. Based on the results, the significant increase in antioxidant activity was attributed to the fact that the inclusion complex could break the intramolecular hydrogen bonding of SA, thus efficiently eliminating ROS in the fruits. The formation of the inclusion complex was confirmed by experiments and theoretical calculations. Our findings indicate that treatment with SA/β-CD can provide an efficient method of maintaining postharvest quality and extending the shelf life of bananas.

Design of Hybrid Polymeric-Lipid Nanoparticles Using Curcumin as a Model: Preparation, Characterization, and In Vitro Evaluation of Demethoxycurcumin and Bisdemethoxycurcumin-Loaded Nanoparticles

Polymeric lipid hybrid nanoparticles (PLHNs) are the new generation of drug delivery systems that has emerged as a combination of a polymeric core and lipid shell. We designed and optimized a simple method for the preparation of Pluronic F-127-based PLHNs able to load separately demethoxycurcumin (DMC) and bisdemethoycurcumin (BDM). CUR was used as a model compound due to its greater availability from turmeric and its structure similarity with DMC and BDM. The developed method produced DMC and BDM-loaded PLHNs with a size average of 75.55 ± 0.51 and 15.13 ± 0.014 nm for DMC and BDM, respectively. An FT-IR analysis confirmed the encapsulation and TEM images showed their spherical shape. Both formulations achieved an encapsulation efficiency ≥ 92% and an exhibited significantly increased release from the PLHN compared with free compounds in water. The antioxidant activity was enhanced as well, in agreement with the improvement in water dissolution; obtaining IC₅₀ values of 12.74 ± 0.09 and 16.03 ± 0.55 for DMC and BDM-loaded PLHNs, respectively, while free curcuminoids exhibited considerably lower antioxidant values in an aqueous solution. Hence, the optimized PHLN synthesis method using CUR as a model and then successfully applied to obtain DMC and BDM-loaded PLHNs can be extended to curcuminoids and molecules with a similar backbone structure to improve their bioactivities.