Insight into the correlations among rheological behaviour, protein molecular structure and 3D printability during the processing of surimi from golden pompano (Trachinotus ovatus)

Nondestructive frozen protein ink: Antifreeze mechanism, processability, and application in 3D printing

Antifreeze peptide (AFP) including in frozen protein ink is an inevitable trend because AFP can make protein ink suitable for 3D printing after freezing. AFP-based surimi ink (ASI) was firstly investigated, and the AFP significantly enhanced 3D printability of frozen surimi ink. The rheological and textural results of ASI show that the τ0, K, and n values are 321.14 Pa, 2.2259 × 105 Pa·sn, and 0.19, respectively, and the rupture strength of the 3D structure is up to 217.67 g. Circular dichroism, intermolecular force, and differential scanning calorimeter show ASI has more undenatured protein after freezing when compared that surimi ink (SI), which was denatured, and the α-helix changed to a β-sheet due to the destruction of hydrogen bonds and the exposure of hydrophobic groups. The water distribution, water holding capacity, and microstructure indicate that ASI effectively binds free water after freezing, while SI has weak water binding capacity and a large amount of free water is formed. ASI is suitable for 3D printing, and can print up to 40.0 mm hollow isolation column and 50.0 mm high Wuba which is not possible with SI. The application of AFP provides guidance for 3D printing frozen protein ink in food industry.

Gelatinous quality and quantitative proteomic analyses of snakehead (Channa argus) surimi treated by atmospheric cold plasma

In this study, the comprehensive quality characteristics and proteome changes of snakehead (Channa argus) surimi gel under different atmospheric cold plasma (ACP) treatment times were systematically analyzed and compared. The results showed that the ubiquitin-associated proteins and heat shock proteins were activated after ACP treatment for 90 s (ACP90), thus inducing rearrangement of surimi structural proteins. Meanwhile, the increased hydrophobic interactions and disulfide bonds might strengthen the interactions among the myofibrillar protein, keratin, and type-I collagen, which led to the formation of a dense gel network. Moreover, the high nodality between actin and myosin promoted the regulation of muscle contraction by changing the spatial obstruction of their binding sites. These beneficial effects obviously contributed to the superior water-holding capacity (76.13%), gel strength (285.6 g·cm) and viscoelasticity of snakehead surimi in the ACP90 group. These results would provide some useful information for the in-depth and efficient processing of surimi products.

Effects of pre-formulation and post-cooking method on the rheological and gelation properties of 3D printed chicken products

This study investigated the influence of oil type (olive, soybean, and peanut oil) and post-cooking methods (oven bake and microwave) on the quality of 3D printed chicken meat products. The Ostwald-de-Waele model was used to describe the flow behavior of chicken meat paste (R2 > 0.995). Oil-fortified groups present significantly lower consistency index (K) and flow behavior index (n), indicating better fluidity. A modified Cox-Merz rule was applied by multiplying angular frequency with shift factors (αSF). Surprisingly, the values of αSF are well-correlated with accuracy parameters of 3D printed cubes (|r| >0.8). For post-heating methods, baking results in higher fluid loss but contributes to a smoother surface. The microwaved gels showed better fluid retention ability and higher accuracy but lost the detail shape of the 3D printing model. Overall, the PO (peanut oil) meat emulsion group presented better textural properties and flat surfaces than other oil-added counterparts.

Investigation on 3D Printing of Shrimp Surimi Adding Three Edible Oils

Three-dimensional (3D) printing provides a new method for innovative processing of shrimp surimi. However, there still exists a problem of uneven discharge during the 3D printing of surimi. The effects of different amounts of lard oil (LO), soybean oil (SO), and olive oil (OO) (0%, 2%, 4%, and 6%, respectively) added to shrimp surimi on the 3D printability of surimi were evaluated. The findings showed that with the increase in the added oil, the rheological properties, texture properties, water-holding capacity (WHC), and water distribution of surimi with the same kind of oil were significantly improved; the printing accuracy first increased and then decreased; and the printing stability showed an increasing trend (p < 0.05). The surimi with 4% oil had the highest printing adaptability (accuracy and stability). Different kinds of oil have different degrees of impact on the physical properties of surimi, thereby improving 3D-printing adaptability. Among all kinds of oil, LO had the best printing adaptability. In addition, according to various indicators and principal component analysis, adding 4% LO to shrimp surimi gave the best 3D-printing adaptability. But from the aspects of 3D printing properties and nutrition, adding 4% SO was more in line with the nutritional needs of contemporary people.

Interaction between liposome and myofibrillar protein in surimi: Effect on gel structure and digestive characteristics

This study investigated the effects of the interaction between liposomes and myofibrillar protein (MP) on tilapia surimi. The strong interaction between liposomes and MP was primarily mediated through hydrogen bonding and hydrophobic interaction. Liposomes caused the unfolding of MP structure, resulting in the decrease of α-helix content and transformation of spatial structure. Notably, the appropriate ratio of liposomes improved the gel properties of tilapia surimi. The water distribution, microstructure, and texture characteristics further confirmed that liposomes strengthened the structure of surimi gel through non-covalent bonds. However, excessive liposomes (1.0 %) weakened gel characteristics and texture. Moreover, the proper ratio of liposomes enhanced the stability of surimi gels during digestion, reducing protein digestibility from 66.0 % to 54.8 %. Curcumin-loaded liposomes in gel matrix notably delayed digestion and improved bioavailability. This delay in digestion was attributed to the ability of liposomes to decrease the interaction between MP and digestive enzymes. This study provides new insight into the application of liposomes in protein-rich food matrixes.

Effects of CaCl2 on 3D Printing Quality of Low-Salt Surimi Gel

In order to develop low-salt and healthy surimi products, we limited the amount of NaCl to 0.5 g/100 g in this work and studied the effect of CaCl₂ (0, 0.5, 1.0, 1.5, and 2.0 g/100 g) on the 3D printing quality of low-salt surimi gel. The results of rheology and the 3D printing showed that the surimi gel with 1.5 g/100 g of CaCl₂ added could squeeze smoothly from the nozzle and had good self-support and stability. The results of the chemical structure, chemical interaction, water distribution, and microstructure showed that adding 1.5 g/100 g of CaCl₂ could enhance the water-holding capacity and mechanical strength (the gel strength, hardness, springiness, etc.) by forming an orderly and uniform three-dimensional network structure, which limited the mobility of the water and promoted the formation of hydrogen bonds. In this study, we successfully replaced part of the salt in surimi with CaCl₂ and obtained a low-salt 3D product with good printing performance and sensory properties, which could provide theoretical support for the development of healthy and nutritious surimi products.

Effects of tetrasodium pyrophosphate coupled with soy protein isolate on the emulsion gel properties of oxidative myofibrillar protein

The effects of protein oxidation on the emulsion gel properties of myofibrillar protein (MP) in the presence of tetrasodium pyrophosphate (TSPP) and soybean protein isolate (SPI) were investigated from the perspective of interfacial protein interactions. The results showed that the emulsifying activity and emulsion stability of MP increased by 35.2 %-181.6 % with elevated H₂O₂ concentrations (1-20 mM), while the gel strength and water holding capacity of MP emulsions first increased to a maximum at 5 mM H₂O₂ and then decreased. TSPP and SPI further reinforced the effects caused by oxidation. The emulsifying properties of MP and its emulsion gel properties were closely related to surface hydrophobicity/hydrogen bonds/hydrophobic interactions and disulfide bonds among interfacial proteins, respectively. However, these correlations became difficult to define when TSPP and SPI were introduced. The study provides a theoretical basis for the strategy development to reduce protein oxidation damage on meat product quality.

Effects of pH and NaCl on the Spatial Structure and Conformation of Myofibrillar Proteins and the Emulsion Gel System—Insights from Computational Molecular Dynamics on Myosin of Golden Pompano

In this study, the effects of pH and NaCl concentrations on the structure of golden pompano myosin and emulsion gel were analyzed using SEM in combination with molecular dynamics simulations (MDS). The microscopic morphology and spatial structure of myosin were investigated at different pH (3.0, 7.0, and 11.0) and NaCl concentrations (0.0, 0.2, 0.6, and 1.0 M), and their effects on the stability of emulsion gels were discussed. Our results show that pH had a greater effect on the microscopic morphology of myosin than NaCl. The MDS results show that under the condition of pH 7.0 and 0.6 M NaCl, the myosin expanded and experienced significant fluctuations in its amino acid residues. However, NaCl showed a greater effect on the number of hydrogen bonds than pH. Although changes in pH and NaCl concentrations only slightly altered the secondary structures in myosin, they, nevertheless, significantly influenced the protein spatial conformation. The stability of the emulsion gel was affected by pH changes but not NaCl concentrations, which only affect the rheology. The best elastic modulus G″ of the emulsion gel was obtained at pH 7.0 and 0.6 M NaCl. Based on the results, we conclude that pH changes have a greater influence than NaCl concentrations on the spatial structure and conformation of myosin, contributing to the instability of its emulsion gel state. The data from this study would serve as a valuable reference for emulsion gel rheology modification in future research.

Regulation of the Colour Change of 3D-Printed Mackerel Mince (Scomber scombrus) Based on Purple Potato Powder and Citric Acid

The present study evaluates the effect of purple potato (PP) powder and citric acid (CA) on the regulation of the colour change of 3D (three-dimensional) printed mackerel mince (Scomber scombrus). In addition, the effects of PP and CA content on the 3D-printability and quality of mackerel mince were also investigated. The results showed that an increase in PP and CA concentrations gradually brightened the product colour and turned it pink. Furthermore, an increase in PP concentration and added CA reduced the fluidity and loss of water in mackerel mince. Proper PP and CA concentrations moderately increased the storage modulus (G'), loss modulus (G″), and yield stress of mackerel mince, making it suitable for 3D printing. At the same time, an increase in PP and CA concentrations enhanced the umami and sweet taste of mackerel mince but reduced the fishy and sour taste, and the degree of preference was within the acceptable range, except for PP1%-CA0%. It was found that, when the 3D-printing accuracy of mackerel-mince samples reached more than 97% and was acceptable, the optimal PP and CA concentrations for realizing the regulation of L*, a*, and b* were 1.00~3.00% and 0.09~0.32%, respectively.

Effect of konjac glucomannan with different viscosities on the quality of surimi-wheat dough and noodles

It was investigated that the rheology, starch-gluten-surimi network, thermal properties, and water distribution of surimi-wheat dough, and texture characteristics, cooking properties, and microscopic characteristics of the surimi-wheat noodles with konjac glucomannan (KGM) of different viscosities in different concentrations. The results showed that the storage (G'), loss (G″), and complex (G⁎) moduli of dough increased with adding KGM. With the increase of KGM viscosity, the reduction in the free sulfhydryl (SH) content to 0.84 μmol/g and the increase in the free water content to 8.25 % led to significantly improved enthalpy and the microstructure density. The hardness and tensile length of noodles were substantially increased by adding 3 % KGM. In addition, the KGM enhanced the starch-gluten-surimi network and improved the cooking qualities and textural properties of noodles. More importantly, the application of KGM in the wheat flour composite system also showed better performance. Thus, the introduction of KGM into the surimi-wheat dough had a significant effect on the optimization of the macro- and micro-characteristics of dough and noodles.

The Spatial Distribution Patterns, Physicochemical Properties, and Structural Characterization of Proteins in Oysters (Crassostrea hongkongensis)

Protein content, a vital component determining the nutritional quality of oysters, is unevenly distributed in different parts of oyster. In this study, the spatial distribution (visceral mass, mantle, gill, and adductor) patterns and structural characteristics of proteins, including water–soluble proteins (WSP), salt–soluble proteins (SSP), acid–soluble proteins (ASP) and alkali–soluble proteins (ALSP) of oysters (Crassostrea hongkongensis) were investigated with the amino acid analyzer, circular dichroism spectroscopy (CD), fourier transform infrared spectroscopy (FTIR), and fluorescence spectroscopy. The results showed that oyster proteins were mainly distributed in the visceral mass and mantle. The protein composition was WSP, SSP, ALSP, and ASP in descending order, which conformed to the ideal amino acid pattern. Variations in secondary structure, molecular weight distribution, and thermal denaturation temperatures of the oyster proteins were observed. SSP had wider bands (16–270 kDa) than those of ASP (30–37 kDa) and ALSP (66–270 kDa). Among the four proteins, the SSP of the mantle showed the highest thermal stability (87.4 °C), while ALSP of the adductor muscle had the lowest the lowest the peak denaturation temperature (Tm) (53.8 °C). The proportions of secondary structures in oyster proteins were different, with a higher proportion of solid protein β–folds, and the exposure of aromatic amino acid residues and disulfide bonds and the microenvironment in which they were located were also different.

Application of Protein in Extrusion-Based 3D Food Printing: Current Status and Prospectus

Extrusion-based 3D food printing is one of the most common ways to manufacture complex shapes and personalized food. A wide variety of food raw materials have been documented in the last two decades for the fabrication of personalized food for various groups of people. This review aims to highlight the most relevant and current information on the use of protein raw materials as functional 3D food printing ink. The functional properties of protein raw materials, influencing factors, and application of different types of protein in 3D food printing were also discussed. This article also clarified that the effective and reasonable utilization of protein is a vital part of the future 3D food printing ink development process. The challenges of achieving comprehensive nutrition and customization, enhancing printing precision and accuracy, and paying attention to product appearance, texture, and shelf life remain significant.

Changes in Gel Structure and Chemical Interactions of Hypophthalmichthys molitrix Surimi Gels: Effect of Setting Process and Different Starch Addition

The modifications of histological properties and chemical forces on heated surimi gels with starch addition (0-12 g/100 g surimi) were investigated. Two types of heating processes (direct heating and two-step heating) were carried out on surimi gels in order to reveal the effect of setting on mixed matrices. The results of transverse relaxation time showed less immobile water and free water converted into bound water in a matrix subjected to the setting process. Scanning electron microscope and light microscopy images revealed inefficient starch-swelling in two-step heated gels. Chemical interactions and forces in direct cooking gels were more vulnerable to starch addition, resulting in significant decreases in hydrophobic interaction and sulfhydryl content (p < 0.05). With the increment of starch, the disulfide stretching vibrations of the gauche-gauche-gauche conformation were reduced in both gel matrices. The structural variations of different components collectively resulted in changes in texture profile analysis and water holding capacity. Overall, the results demonstrated that starch addition had a great and positive effect on the weak gel matrix by direct heating.

LF-NMR as a tool for predicting the 3D printability of surimi-starch systems

In this study, surimi from golden pompanos was mixed with starch to form a surimi-starch system. The water properties, rheological properties, and three-dimensional (3D) printability of the surimi-starch were measured. Cluster analysis results showed that the 3D printability was closely related to the type and addition content of starch, and the water and rheological properties. The low-field nuclear magnetic resonance (LF-NMR) parameters were used to predict 3D printability using polynomial regression models. The correlation coefficients (R²) for 3D printing accuracy and stability were 0.88 and 0.93, and the root mean square error (RMSE) values were 0.20% and 4.59%, respectively. In the verification test, the R² for the two models were 0.85 and 0.89, and the RMSE values were 0.20% and 1.06%, respectively. The nonlinear surface regression fitting exhibited superior predictive performance. Therefore, LF-NMR is a good non-destructive tool for quickly and accurately predicting the 3D printability of the surimi-starch systems.