Synergetic effects of water-soluble polysaccharides for intensifying performances of oleogels fabricated by oil-absorbing cryogels

Effect of Ganoderma lucidum water extract on flavor volatiles and quality characteristics of set-type yogurt

This study investigated the effects of several concentrations of Ganoderma lucidum water extract (GLWE) (0, 0.5, 1.0, and 1.5 %) on set-type yogurt's flavor volatiles as well as the physicochemical, textural, and antioxidant activities of the yogurt during storage. The HS-SPME-GC-MS investigation found that adding GLWE increased the amount of flavor volatiles in yogurt, which improved the quality of flavor volatiles produced by the yogurt. The yogurt's water holding capacity, syneresis, color, and texture all showed optimum values at a 0.5 % GLWE concentration, and its total number of flavor volatiles reached 43. To sum up, the incorporation of GLWE at a 0.5 % concentration promotes the development of superior flavor volatiles in yogurt and enhances its qualitative attributes in contrast to the control group.

Construction of foam-templated Antarctic krill oil oleogel based on pea protein fibril and ι-carrageenan

Edible plant-based oleogels with zero trans-fat are promising solid fat substitutes. In this study, Antarctic krill oil (AKO) oleogels prepared from pea protein fibril (PPF) and ι-carrageenan (CG) by foam-templated method were developed for the first time. The modulation of the ratio of PPF and CG concentration on the structure and properties of foam, cryogel and oleogel was investigated and the potential formation mechanism of the foam-templated oleogel was explained. The results demonstrated that the addition of CG significantly decreased the foam size and enhanced the foam stability. The oil absorption and oil holding ability of the dense and reticular porous structure of the cryogel was demonstrated. Fourier infrared spectroscopy confirmed the interaction between PPF and CG involved in the formation of cryogels. With the addition of CG, the network structure and mechanical strength of the cryogel were reinforced, leading to more compact pores and higher capillary suction, which was appropriate for the establishment of good viscoelastic semi-solid oleogels. In addition, the oleogel was effective in masking the fishy odor of AKO. The significance of this study lies in its provision of a novel approach to the preparation of the foam-templated oleogel with PPF and CG as the oleogelators.

Development and characterization of defatted coconut flour based oleogels: A fat substitute for application in oil-fortified surimi

This research examined the impact of defatted coconut flour (DCF)-based oleogels on the quality of surimi. Microscopic analysis indicated that the dietary fiber present in DCF could act as the main structure of the oleogels network. The formation of the oleogels network primarily relies on the tensile intramolecular or intermolecular hydrogen bonds between DCF and corn oil. The oleogels displayed oil binding capacity of up to 96.95% and exhibited favorable mechanical and rheological properties. Efforts were undertaken to integrate the acquired oleogels into silver carp surimi to create oil-fortified surimi products. Adding oleogels significantly enhanced the gel strength, texture, and water-holding capacity of surimi compared to adding corn oil. Especially, oleogels containing 5.0 % (w/v) DCF concentration elevated the lipid content in the surimi and preserved the gel and texture properties. Therefore, incorporating oleogels in surimi presents a potential solution for enhancing the nutritional content of surimi products.

Novel organic-inorganic composite pea protein silica food-grade aerogel materials: Fabrication, mechanisms, high oil-holding property and curcumin delivery capacity

The fragility of the skeleton and poor bioaccessibility limit Silica aerogel's application in the food industry. In this study, composite gels were obtained by cross-linking pea proteins isolate (PPI) with Tetraethoxysilane (TEOS)to improve the bioavailability of silica-derived aerogels. It indicated that TEOS first condensed with H+ to form secondary particles and then complexed with PPI via hydroxyl groups to form a composite aerogel. Meanwhile, the PPI-Si composite aerogel formed a dense mesoporous structure with a specific surface area of 312.5 g/cm3. This resulted in a higher oil holding percentage of 89.67 % for the PPI (10 %)-Si aerogel, which was 34.1 % higher than other studies, leading to a more stable oleogel. Finally, as a delivery system, the composite oleogel not only could significantly increase the bioaccessibility rate by 27.4 % compared with silica aerogel, but also could efficiently inhibit the premature release of curcumin in the simulated gastric fluids, while allowed sustainably release in the simulated intestinal fluids. These results provided a theoretical basis for the application of silica-derived aerogels in food and non-food applications.

Effects of Semen Ziziphi Spinosae extract and binary probiotics co-fermentation on the quality of yogurt and their underlying molecular mechanisms

The study aimed to investigate the impact of water-soluble extract from Semen Ziziphi Spinosae (SZSE) on yogurt quality and understand the underlying mechanism. The results demonstrated that adding 0.5% (w/v) SZSE had a significant effect on reducing yogurt syneresis and resulted in a more compact and uniform casein gel. Notably, the co-fermented yogurt with binary probiotics (Lacticaseibacillus casei CGMCC1.5956 and Levilactobacillus brevis CGMCC1.5954) along with SZSE led to increased viable probiotics and a higher odor score (23.23). This effect might be attributed to the increased amino acid utilization by binary probiotics through biosynthesis of valine, leucine and isoleucine, metabolic pathways, and amino acid biosynthesis to produce amino acid derivatives such as N5-(l-1-carboxyethyl)-l-ornithine and diaminopyrimidine acid. The yogurt contained 79 volatile flavor compounds, with hexanoic acid, 2-heptanone, and 2-nonanone potentially contributing to the high odor scores. These findings have strategic implications for developing yogurt with high gel characteristics and distinctive flavor.

Effects of drying method and oil type on edible polyunsaturated oleogels co-structured by hydroxylpropyl methyl cellulose and xanthan gum

The subtle balance between the interactions of polysaccharide molecules and the interactions of polysaccharide molecules with oil molecules is significantly important for developing polysaccharide-based polyunsaturated oleogels. Here, hydroxylpropyl methyl cellulose and xanthan gum were used to structure edible oleogels via emulsion-template methodology, while the effects of drying methods (hot-air drying (AD) and vacuum-freeze drying (FD)) and oil types (walnut, flaxseed and Moringa seed oil) on the structure, oil binding capacity (OBC), rheological properties, thermal behaviors and stability of oleogels were specially investigated. Compared with AD oleogels, FD oleogels exhibited significantly better OBC, enhanced gelation strength (G' value) and better capacity to holding oil after high temperature processing, which was attributed to the possibly increased oil-polysaccharide interactions. However, the weakened polysaccharide-polysaccharide interactions in FD oleogels failed in providing stronger physical interface or enough rigidity to restrict the migration of oil molecules. Polyunsaturated triacylglycerols in vegetable oils deeply participated in the construction of the network of AD oleogels through weak intermolecular non-covalent interactions, which in turn greatly changed the crystallization and melting behaviors of vegetables oils. In brief, this research may provide useful information for the development of polysaccharide-based polyunsaturated oil oleogels.

Edible polysaccharide-based oleogels and novel emulsion gels as fat analogues: A review

Polysaccharide-based oleogels and emulsion gels have become novel strategies to replace solid fats due to safe and plentiful raw material, healthier fatty acid composition, controllable viscoelasticity, and more varied nutrition/flavor embedding. Recently, various oleogelation techniques and novel emulsion gels have been reported further to enrich the potential of polysaccharides in oil structuring, in which a crucial step is to promote the formation of polysaccharide networks determining gel properties through different media. Meanwhile, polysaccharide-based oleogels and emulsion gels have good oil holding, nutrient/flavor embedding, and 3D food printability, and their applications as fat substitutes have been explored in foods. This paper comprehensively reviews the types, preparation methods, and mechanisms of various polysaccharide-based oleogels and emulsion gels; meanwhile, the food applications and new trends of polysaccharide-based gels are discussed. Moreover, some viewpoints about potential developments and application challenges of polysaccharide-based gels are mentioned. In the future, polysaccharide-based gels may be flexible materials for customized nutritional foods and molecular gastronomy. However, it is still a challenge to select the appropriate oleogels or emulsion gels to meet the requirements of the products. Once this issue is addressed, oleogels and emulsion gels are anticipated to be used widely.

Adhesive and biodegradable polymer mixture composed of high -biosafety pharmaceutical excipients as non-setting periodontal dressing

Periodontal dressing is a surgical dressing applied to oral wounds after periodontal surgery. Currently, all commercially available setting periodontal dressings are stiff, uncomfortable, with poor aesthetics, and need to be removed at the patient's follow-up visit, which may cause secondary damage. A periodontal dressing with soft texture, biodegradable properties, and that could balance both comfort and aesthetics is urgently desired. Hence, non-setting and degradable dressings were developed using sodium carboxymethyl cellulose, Eudragit S 100 and povidone K30, which were compared with the commercial degradable dressing Reso-pac®. The mucosal adhesion of the dressings was evaluated by lap shear tests, which indicated adequate adhesion. The in vitro swelling rates of the dressings were approximately half that of Reso-pac®, which led to less saliva adsorption and better dimensional stability. The dressings also exhibited satisfactory biocompatibility according to the results of CCK-8, Live/Dead staining, hemolysis, and subcutaneous implantation assays. Moreover, the dressing promoted the healing of full-thickness mucosal wounds in the palatal gingivae of SD rats and contributed to better therapeutic effect than Reso-pac®. Considering the multiple advantages and the pure pharmaceutical excipient formula, we anticipate that this dressing could be a promising product and may enter clinical practice in the near future.

Flaxseed Gum/Arabic Gum/Tween 80-Based Oleogel as a Fat Substitute Applied in Emulsified Sausage: Physicochemical Properties, Sensory Attributes and Nutritional Quality

In the present study, flaxseed gum (FG), Arabic gum (GA) and Tween 80 were used to prepare oleogels through an emulsion-templated method, and the obtained oleogels were designed for the partial substitution of pork fat in emulsified sausage. An increment in FG concentrations enhanced the viscoelasticity of emulsions, which resulted in the improved stability of emulsion systems, with smaller droplet sizes. In addition, increased FG concentrations contributed to higher mechanical strength, denser network structure and lower oil loss of oleogels. As a fat substitute, the prepared oleogels improved the textural properties and nutritional quality of emulsified sausages. With the increase in the substitution level of oleogels, the hardness and chewiness of the emulsified sausage increased, and the cooking loss decreased. Meanwhile, the reformulation with oleogels decreased the saturated fat from 57.04 g/100 g lipid to 12.05 g/100 g lipid, while increasing the ratio of omega-6 to omega-3 essential fatty acids from 0.10 to 0.39. The obtained results demonstrated that the flaxseed gum/Arabic gum/Tween 80-based oleogels had huge potential to successfully replace pork fat in emulsified sausage products.

Recent advances in natural gums as additives to help the construction and application of edible biopolymer gels: the example of hydrogels and oleogels

Novel, innovative approaches like edible gels (hydrogels and oleogels) are important food materials with great scientific interest due to their positive impacts on structural and functional foods and other unique properties. Biopolymers (protein, starch and other polysaccharides) can be excellent and cost-effective materials for the formed edible gels. Recently, natural gums, although also as biopolymers, are preferred as additives to further improve the textural and functional properties of edible gels, which have received extensive attention. However, these studies have not been outlined in previous reviews. In this review, we highlighted the advantages of gums as additives to construct edible gels. Moreover, the various roles (including electrostatic or covalent interactions) for natural gums in regulation of food gel properties (solvent-holding and rheological properties) are highlighted. Finally, the use of natural gums as additives to improve the stability and targeted delivery of phytochemicals in food gels and their application in food systems are summarized. The information covered in this article may be useful for the design of functional foods that can better meet personalized needs of people.

Characterization of chitosan-gelatin cryogel templates developed by chemical crosslinking and oxidation resistance of camellia oil cryogel-templated oleogels

In this study, chitosan-gelatin conjugates were prepared by chemical crosslinking of tannic acid. The cryogel templates were developed through freeze-drying and immersed in camellia oil to construct cryogel-templated oleogels. Chemical crosslinking resulted in apparent colour changes and improved emulsion-related/rheological properties on conjugates. The cryogel templates with different formulas exhibited different microstructures with high porosities (over 96 %), and crosslinked samples might have higher hydrogen bonding strength. Tannic acid crosslinking also led to enhanced thermal stabilities and mechanical properties. Cryogel templates could reach a considerable oil absorption capacity of up to 29.26 g/g and prevent oil from leaking effectively. The obtained oleogels with high tannic acid content possessed outstanding antioxidant abilities. After 8 days of rapid oxidation at 40 °C, Oleogels with a high degree of crosslinking owned the lowest POV and TBARS values (39.74 nmol/kg, and 24.40 μg/g, respectively). This study indicates that the involvement of chemical crosslinking would favor the preparation and the application potential of cryogel-templated oleogels, and the tannic acid in the composite biopolymer systems could act as both the crosslinking agent and the antioxidant.

Effects of vegetable oil and ethylcellulose on the oleogel properties and its application in Harbin red sausage

The effects of ethylcellulose (EC) concentration (6-12 %) and types of vegetable oil (sunflower, peanut, corn, and flaxseed oils) on the color, hardness, oil loss, lipid oxidation, and rheology property of oleogels were investigated in this study. Peanut oil (PO) oleogel was selected to replace pork fat partially in Harbin red sausage. Meanwhile, the fatty acid profile, texture, and sensory attributes of the reformulated sausages were analyzed. Oleogels formulated with higher EC concentration had higher brightness and hardness, a higher degree of lipid oxidation, and greater storage (G') and loss (G'') moduli. Oleogels formulated with PO had lower oil loss, flaxseed oil oleogel had higher hardness. Corn oil and PO oleogels had a lower level of lipid oxidation. The texture, lipid oxidation, and sensory attributes of the reformulated sausages, in which 10-30 % pork fat was replaced with PO oleogel, did not significantly differ from those without oleogel replacement. Meanwhile, the reformulated sausages had a healthier fatty acids profile and higher nutritional value.

Edible oleogels based on high molecular weight oleogelators and its prospects in food applications

Food industry is actively looking for alternative ingredients to replace saturated and trans fats in foods while preserving their original organoleptic attributes to ensure consumers' acceptance. A plausible approach is the replacement of solid fats with oleogels. Oleogels can be engineered to mimic properties that are commonly played by regular solid fats but using hydrophobic liquid vegetable oil with an optimum fatty acid profile and, they can also act as carriers for lipophilic bioactive substance. Low molecular weight oleogelators (LMOGs) are well studied and reviewed. In contrast, high molecular weight oleogelators (HMOGs) e.g., polysaccharides and proteins, are not fully researched yet. This review focusses on development of HMOG oleogels produced by means of emulsion templated, direct dispersion, foam templated and solvent exchange methods that can influence the stability, physicochemical properties and their potential application in food industry. Multi-component oleogels can solve the inefficiencies in a single component oleogel and, thus, combinations of HMOGs and HMOGs & LMOGs can produce oleogels with desired properties. These new oleogels can find application as fat substitutes in food products, providing better nutritional and sensory acceptance. A comprehensive overview of recent developments in the field of HMOG and multicomponent oleogels with HMOG is deeply reviewed.

Double network oleogels co-stabilized by hydroxypropyl methylcellulose and monoglyceride crystals: Baking applications

Edible double network oleogels were prepared by hydroxypropyl methylcellulose (HPMC) and glyceryl monostearate (GMS) by the cryogel-templated method. Hot GMS soybean oil solutions were absorbed by HPMC cryogels, which were further homogenized and cooled to form oleogels containing both the HPMC network and GMS network. The crystal network constructed by GMS crystal clusters significantly enhanced the mechanical and rheological attributes of oleogels. Both the HPMC network and the GMS network were built up due to hydrogen bonds. According to the normalization analysis of FTIR and the deepening of the shift of the absorption peak, hydrogen bonds could also be formed between HPMC and GMS to connect the two independent networks. Double network oleogels were further used to fabricate cookies and cakes, assessed by the texture profile analysis. The combination of the HPMC network and GMS network in preparing oleogels will promote the application of oleogels as the fat replacer.