Effects of micro-/nano-scaled chicken bones on heat-induced gel properties of low-salt pork batter: Physicochemical characteristics, water distribution, texture, and microstructure

Evaluating the effect of thermo-reversible and thermo-irreversible curdlan gels on the gelling properties and in vitro digestibility of myofibrillar protein gels under low-salt condition

The purpose of the present study was to investigate the gelling properties and in vitro digestibility of myofibrillar protein (MP) gels under low-salt condition as mediated by different concentrations of thermo-reversible curdlan gels (TRC) or thermo-irreversible curdlan gels (TIRC). The results showed that the incorporation of TRC or TIRC obviously improved the gel strength and water holding capacity of MP gels (P < 0.05). Those properties were most improved by adding 0.3 % TRC or TIRC with gel strength of 0.18 N or 0.17 N and WHC of 54.85 % or 49.05 %. Meanwhile, both TRC and TIRC promoted the transformation of α-helix into β-sheet, as well as hydrophobic interactions and disulfide bonds, which are the main forces for the maintenance of the MP gels. The microstructure revealed that the formation of dense and uniform protein network structures can be promoted by the addition of TRC or TIRC. The different modes of interaction between TRC or TIRC and MP resulted in different microstructures of the MP gels. Furthermore, incorporation of TRC or TIRC significantly reduced in vitro protein digestibility, especially for the 0.3 % (w/w) form (P < 0.05). Meanwhile, MP gels had the lowest in vitro protein digestibility after the addition of TRC (66.67 %) compared to the form of TIRC (70.93 %). Therefore, our present study indicated that incorporation form of TRC or TIRC have distinct implications on regulating the gelling properties and in vitro digestibility of MP gels under low-salt condition.

Phase behavior of the gelation process of myofibrillar protein-curdlan blended system: Discussion based on rheology and gel properties

The phase behavior in protein-polysaccharide blended systems is the main factor affecting the physical properties of composite gels; however, the phase behavior at room temperature and during heated gelation is lacking discussion. In this research, extracted grouper myofibrillar protein (MP) and curdlan (CUR) were used as models for the MP-CUR blended system. The phase behavior of the MP-CUR blended system was analyzed using rheology and microstructure analysis, and the accuracy of the phase behavior analysis was verified by measuring the physical indices such as gel properties of the MP-CUR composite gels. At room temperature, MP and CUR showed good co-solubility, so the blended system with 0.8% CUR content obtained the best apparent viscosity, structural recoverability, and other rheological properties. After heating gelation, MP and CUR had strong thermodynamic unaffinity leading to phase separation, and the best storage modulus was obtained for the MP-CUR blended system with 0.6% CUR content. Therefore, it is concluded that 0.6% CUR content is the critical concentration for the MP-CUR blended system. The results were also confirmed by the best gel properties of 0.6% CUR composite gel when the physical properties of the composite gel were determined. The phase behavior evaluation was used to determine the appropriate polysaccharide concentrations as a means to improve the physicochemical properties of the composite gels and to exploit the value of polysaccharides in protein-based food applications.

Migration of Nutrient Substances and Characteristic Changes of Chicken White Soup Emulsion from Chicken Skeleton during Cooking

The protein and fat in chicken skeleton can be emulsified in a boiling state to form milky white chicken soup. White chicken soup has a delicious taste, good nutritional value, a beautiful color, and volatile flavor compounds. However, cooking time significantly impacts the quality of white chicken soup. Herein, we investigated the influence of cooking time (30, 60, 90, 120, 150, 180, and 210 min) on the migration of nutrient substances and characteristics changes in white chicken soup from chicken skeletons. The results showed that nutrients such as total lipids, water-soluble protein, total sugars, solid matter, and oligopeptides in the chicken skeletons' tissue continuously migrated into the soup during the cooking process. The total nutrient content in the chicken soup was highest after cooking for 180 min. Simultaneously, the white chicken soup obtained after cooking for 180 min had low interfacial tension and high whiteness, viscosity, and storage stability. The high stability index was associated with increased ζ potential and decreased particle size. The contact angle analysis results also indicated that the stability of the white chicken soup was improved when the cooking time reached 180 min. This research provides basic information for the production of high-quality white chicken soup.

Recent strategies for improving the quality of meat products

Processed meat products play a vital role in our daily dietary intake due to their rich protein content and the inherent convenience they offer. However, they often contain synthetic additives and ingredients that may pose health risks when taken excessively. This review explores strategies to improve meat product quality, focusing on three key approaches: substituting synthetic additives, reducing the ingredients potentially harmful when overconsumed like salt and animal fat, and boosting nutritional value. To replace synthetic additives, natural sources like celery and beet powders, as well as atmospheric cold plasma treatment, have been considered. However, for phosphates, the use of organic alternatives is limited due to the low phosphate content in natural substances. Thus, dietary fiber has been used to replicate phosphate functions by enhancing water retention and emulsion stability in meat products. Reducing the excessive salt and animal fat has garnered attention. Plant polysaccharides interact with water, fat, and proteins, improving gel formation and water retention, and enabling the development of low-salt and low-fat products. Replacing saturated fats with vegetable oils is also an option, but it requires techniques like Pickering emulsion or encapsulation to maintain product quality. These strategies aim to reduce or replace synthetic additives and ingredients that can potentially harm health. Dietary fiber offers numerous health benefits, including gut health improvement, calorie reduction, and blood glucose and lipid level regulation. Natural plant extracts not only enhance oxidative stability but also reduce potential carcinogens as antioxidants. Controlling protein and lipid bioavailability is also considered, especially for specific consumer groups like infants, the elderly, and individuals engaged in physical training with dietary management. Future research should explore the full potential of dietary fiber, encompassing synthetic additive substitution, salt and animal fat reduction, and nutritional enhancement. Additionally, optimal sources and dosages of polysaccharides should be determined, considering their distinct properties in interactions with water, proteins, and fats. This holistic approach holds promise for improving meat product quality with minimal processing.

Ultrasonic treatment combined with curdlan improves the gelation properties of low-salt Nemipterus virgatus surimi

In this study, the gel properties of ultrasonic alone, curdlan treatment alone, and the combination of both at low-salt surimi levels were investigated, mainly in terms of textural properties, water holding capacity, water distribution, dynamic rheology, protein secondary structure, microstructure and correlation analysis. The results showed that the springiness, gel strength, water holding capacity and energy storage modulus (G') of the low-salt surimi gels without ultrasonic or curdlan treatment were lower than those of the high-salt concentration surimi gels. Compared with the 1 % low-salt group, the ultrasonic treatment combination with curdlan resulted in a significant improvement (p < 0.05) in the texture, water holding capacity and energy storage modulus (G') of the low-salt surimi at the same salt concentration. The gel strength increased significantly from 3386.360 g·mm to 5457.203 g·mm, but there was no significant improvement in whiteness (p > 0.05). In addition, ultrasonic treatment combined with curdlan promoted the shift of the α-helix to the random coil and the β-turn angle shift, thus exposing the internal groups, enhancing protein intermolecular interactions, and promoting the orderly aggregation of proteins, resulting in a microstructure of dense, and obtained the lowest porosity of 14.534 %. The present study might be necessary for promoting the high-value use of aquatic surimi products and the development of low-salt foods.

In vitro digestion and fermentation combined with microbiomics and metabolomics reveal the mechanism of superfine yak bone powder regulating lipid metabolism by altering human gut microbiota

The effects of superfine yak bone powder (YBP) on human gut microbiota (HGM) were investigated by in vitro digestion and fermentation combined with microbiomics and metabolomics. Results showed that size reduction and protein structural degradation during digestion allowed superfine YBP to release more Ca²⁺ than CaCO₃ powders with similar particle size. Moreover, the indigestible YBP further influenced HGM and was associated with increased occurrence of beneficial bacteria such as Megasphaera spp., Megamonas spp., Acidaminococcus spp., and Prevotella spp. The altered HGM was associated with greater production of short-chain fatty acids with 4-6 carbon atoms. Furthermore, the indigestible YBP was associated with up-regulation of many lipid-related metabolites, including taurine, secondary bile acids, saturated long-chain fatty acids, and ω-3/ω-6 polyunsaturated fatty acids, which modulated favorably lipid metabolic pathways. These findings implied the potential activity of superfine YBP as a food fortifier in favorably altering HGM community structure and regulating lipid metabolism.

Effects of CaCl2 on 3D Printing Quality of Low-Salt Surimi Gel

In order to develop low-salt and healthy surimi products, we limited the amount of NaCl to 0.5 g/100 g in this work and studied the effect of CaCl₂ (0, 0.5, 1.0, 1.5, and 2.0 g/100 g) on the 3D printing quality of low-salt surimi gel. The results of rheology and the 3D printing showed that the surimi gel with 1.5 g/100 g of CaCl₂ added could squeeze smoothly from the nozzle and had good self-support and stability. The results of the chemical structure, chemical interaction, water distribution, and microstructure showed that adding 1.5 g/100 g of CaCl₂ could enhance the water-holding capacity and mechanical strength (the gel strength, hardness, springiness, etc.) by forming an orderly and uniform three-dimensional network structure, which limited the mobility of the water and promoted the formation of hydrogen bonds. In this study, we successfully replaced part of the salt in surimi with CaCl₂ and obtained a low-salt 3D product with good printing performance and sensory properties, which could provide theoretical support for the development of healthy and nutritious surimi products.

Physicochemical property, volatile flavor quality, and microbial community composition of Jinhua fatty ham and lean ham: A comparative study

The physicochemical property, volatile flavor compounds, and microbial community structure of Jinhua fatty ham (FH) and lean ham (LH) were investigated and compared by high-throughput sequencing and HS-GC-IMS. Results showed that FH had higher pH and slightly lighter and yellower color than LH. Meanwhile, 33 volatile flavor compounds were identified from FH and LH, among which LH showed higher abundance of total alcohols and acids, but FH had generally richer aldehydes, ketones, esters, heterocyclic, and sulfur-containing compounds. Moreover, FH and LH did not have significant difference in α-diversity of bacterial community, but LH presented a much lower α-diversity of fungal community than FH. Besides, the dominant microorganisms (relative abundance >2%) in FH were Ruminococcaceae UCG-005, Staphylococcus, Ruminococcaceae UCG-014, Meyerozyma, and Aspergillus at the genus level, while in LH were Staphylococcus, Psychrobacter, Halomonas, Propionicicella, Ruminococcaceae UCG-005, Meyerozyma, Yamadazyma, and Aspergillus. Furthermore, the analysis of Pearson's correlation and metabolic network confirmed that the discriminative flavor compounds of FH were mainly β-oxidation and degradation products of fatty acids, while those of LH were mostly derived from the Strecker reaction or microbial metabolism of amino acids. The present study could help understand the potential pathway of characteristic microorganisms affecting flavor formation of fat-deficient dry-cured hams and provide theoretical supports for developing healthier fermented meat products.

The Effect of Different Induction Methods on the Structure and Physicochemical Properties of Glycosylated Soybean Isolate Gels

Soybean protein isolate (SPI), as a full-valued protein, is rich in nutrients, such as amino acids. However, the isolated structure of soybeans makes it difficult to react and thus prepare good gels. In order to further improve the properties of SPIs and to prepare plant-based gels with good performance, this experiment was conducted to prepare maltodextrin glycosylated soybean isolate (MGSI) by the glycosylation of SPI and maltodextrin (MD), and the gels were prepared by thermal induction, transglutaminase (TGase) induction, and TG-MgCl₂ co-induction of this glycosylated protein to investigate the effects of different induction methods on the structure and properties of the gels produced by MGSIs. Moreover, the effects of different induction methods on the structure and properties of the gels produced by MGSI were investigated. SDS-PAGE protein electrophoresis, FTIR spectroscopy, and endogenous fluorescence spectroscopy revealed that all three inductions result in the covalent bond cross-linking of MGSI during the gel formation process. Compared with thermal induction, the TGase-induced MGSI secondary structure had a higher content of β-folded structures, increased fluorescence intensity of tertiary structures, and produced a red shift. The gel induced by TGase in collaboration with MgCl₂ contains a more β-folded structure and irregular curl and increases the β-turned angle and α-helix content further, the endogenous fluorescence λmax is significantly red-shifted, and the fluorescence intensity increases, demonstrating that the tertiary structure of MGSI unfolds the most, forming multilayered gels with the tightest structures. The three gels were analyzed by rheology and SEM, showing that the TGase-MgCl₂ synergistically induced gel had the highest energy-storage modulus G', viscoelasticity, and water-holding capacity, as well as the densest gel structure. In conclusion, the combined treatment of enzyme and MgCl₂ might be an effective way of improving the structure and gel properties of SPI. This study helps to promote the high-value utilization of SPI and the development of plant protein gels.

Conformational Changes in Proteins Caused by High-Pressure Homogenization Promote Nanoparticle Formation in Natural Bone Aqueous Suspension

As a natural calcium resource, animal bone needs to be miniaturized to the nanoscale to improve palatability and absorption capacity. To explore the mechanism of high-pressure homogenization (HPH) in preparing natural bone aqueous nanosuspensions, the relationships between the changes in protein conformation, solubility and quality characteristics of rabbit bone aqueous suspensions (RBAS) prepared by different HPH cycles were studied. The results showed that the improvements in particle size, stability and calcium solubility of RBASs could be mainly attributed to the improvement of protein solubility induced by the changes in protein conformation. HPH treatment led to the denaturation and degradation of protein in rabbit bone, generating soluble peptides and improving the stability of the suspensions by enhancing the surface charge of the particles. When collagen as the main protein was partially degraded, the hydroxyapatite in the bone was crushed into tiny particles. The increase in the particle-specific surface area led to the release of calcium ions, which chelated with the peptides to produce peptide calcium. However, excessive HPH treatment caused the production of protein macromolecular aggregates and affected the quality of RBASs. This study is helpful to promote the application of HPH technology in animal bone nanoprocessing.