Pickering emulsions stabilized by β-cyclodextrin and cinnamaldehyde essential oil/β-cyclodextrin composite: A comparison study

Sustained-release mechanism of β-Cyclodextrin/cationic cellulose-stabilized Pickering emulsions loaded with citrus essential oil

Citrus oil (CO) is a commonly used natural flavor with high volatility, which is not conducive to sustained release under food environmental stress. This study constructed novel β-cyclodextrin/cationic cellulose nanocrystal (β-CD/C-CNC) complexes via noncovalent interaction, which were used to stabilize CO-loaded Pickering emulsions (PEβ-CD/C-CNC). The C-CNC greatly improved the physical stability, droplet dispersion and viscoelasticity of PEβ-CD/C-CNC by forming a tight network structure, as verified by rheological behavior. Moreover, C-CNC improved the wettability of β-CD/C-CNC complexes and enhanced the interaction between adjacent β-CD/C-CNC complexes. C-CNC also contributed to the interfacial viscoelasticity, hydrated mass, and layer thickness via the interfacial dilational modulus and QCM-D. β-CD/C-CNC complexes adsorbed on the oil-water interface gave rise to a dense filling layer as a physical barrier, enhancing the sustained-release performance of PEβ-CD/C-CNC by limiting diffusion of citrus essential oil into the headspace. This study provides new technical approaches for aroma retention in the food industry.

Advances in the preparation and application of cyclodextrin derivatives in food and the related fields

Cyclodextrin (CD) derivatives have recently gained worldwide attention, which have versatile advantages and restrained the defects of parent CDs. The superior properties of CD derivatives in encapsulation, stabilization, and solubilization facilitate their application in food, biomedicine, daily chemicals, and textiles. In this review, the preparation, classification, and main benefits of CD derivatives are systematically introduced. By introducing targeted groups into the parent CD molecule, they exhibit significant improvement in their required characteristic. Besides, the important point closely related to application, the safety assessment, has also been highlighted. Most tested CD derivatives have been verified to be relatively safe in a limited dosage. Then, the applications of CD derivatives have been described in detail from the food to its related field. In food field, CD derivatives play an important role in the stability and bioavailability of bioactive compounds, control flavor release, and improve the antimicrobial and antioxidant properties of packaging materials. These advantages can also be expanded to the related field, offering innovative solutions that enhance product quality, human health, and environmental sustainability. This review highlights the broad applications and potential of CD derivatives, underscoring their role in driving advancements across multiple industries.

Improving physical stability of microalgae protein-based emulsions under acidic and neutral conditions via carboxymethyl chitosan complexation

The emulsification stability of microalgae protein (MP) is limited to strongly alkaline conditions, restricting its applications in food processing. This study aims to investigate the capability of carboxymethyl chitosan (CMCS) to improve MP's emulsification stability over a wider pH range. Results indicated soluble MP-CMCS complexes formed at pH 2, 4, and 7, while aggregation of the complexes occurred at pH 8. The complexes stabilized emulsions exhibited smaller droplet sizes and higher absolute zeta potential at pH 2, 4, and 7 compared to pH 8. After 2 weeks of storage, emulsions remained stable at pH 2, 4, and 7, with significant delamination at pH 8. Laser confocal microscopy confirmed uniform droplet distribution at pH 2 and 7, with slight fusion at pH 4. The complexes stabilized emulsions exhibited higher viscosity and shear stress than MP stabilized emulsions at pH 2, 4, and 7. The stronger viscoelastic properties and higher storage moduli (G') values of MP-CMCS complexes under acidic and neutral conditions indicated stronger intermolecular interactions compared to alkaline conditions. The increase in G' and loss moduli (G") values for emulsions at pH 8 under stress highlighted the significant impact on network structure strength and viscosity in these emulsions. This study elucidated the binding interactions between MP and CMCS under various pH conditions, and demonstrated a feasible approach to improving MP's emulsification stability over a wider pH range.

High-pressure homogenization to improve the stability of liquid diabetes formula food for special medical purposes: Structural characteristics of casein-polysaccharide complexes

The stability of diabetes formula food for special medical purposes (D-FSMP) was improved by high-pressure homogenization (HPH) at different homogenization pressures (up to 70 MPa) and number of passes (up to 6 times). The process at 60 MPa/4 times was the best. Casein had the highest surface hydrophobicity in this condition. The casein-polysaccharide complexes were endowed with the smallest size (transmission electron microscopy images). The complex particles exhibited nearly neutral wettability (the three-phase contact angle was 90.89°), lower interfacial tension, and the highest emulsifying activity index (EAI) and emulsifying stability index (ESI). The prepared D-FSMP system exhibited the narrowest particle size distribution range, the strongest interfacial deformation resistance and the best storage stability. Therefore, an appropriate intensity of HPH could enhance the stability of D-FSMP by improving the interfacial and emulsifying properties of casein-polysaccharide complexes. This study provides practical guidance on the productions of stable D-FSMP.

Pickering emulsion stabilized by quercetin-β-cyclodextrin-diglyceride particles: Effect of diglyceride content on interfacial behavior and emulsifying property of complex particles

This research develops diacylglycerol (DAG) based Pickering emulsions with enhanced oxidative stability stabilized by self-assembled quercetin/DAG/β-cyclodextrin (β-CD) complexes (QDCCs) using a one-step agitation method. Influence of DAG content (5%, 15%, 40%, and 80%, w/w) on the self-assembly behavior, interfacial properties, and emulsifying ability of complex particles was investigated. SEM, XRD and ATR-FTIR studies confirmed the formation of ternary composite particles. QDCCs in 80% DAG oil had the highest quercetin encapsulation efficiency (6.09 ± 0.01%), highest DPPH radical scavenging rate and ferric reducing antioxidant property (FRAP). β-CD and quercetin adsorption rates in emulsion with 80% DAG oil were 88.4 ± 2.53% and 98.34 ± 0.15%, respectively. Pickering emulsions with 80% DAG had the smallest droplet size (8.90 ± 1.87 μm) and excellent oxidation stability. This research develops a novel approach to regulate the physicochemical stability of DAG-based emulsions by anchoring natural antioxidants at the oil-water interface through a one-pot self-assembly method.

Slow-release antimicrobial preservation composite coating based on bamboo-derived xylan-A new way to preserve blueberry freshness

In recent years, the biocompatibility and environmental friendliness of xylan-based materials have demonstrated great potential in the field of food packaging and coatings. In this study, the cationized xylan based composite coating (CXC) was developed using a hybrid system of cationic-modified bamboo xylan (CMX) and sodium alginate (SA) combined with thyme oil microcapsules (TM). The optimized CXC-B was composed of 1.27 % TM, 2.42 % CMX (CMX: SA = 3:2), and 96.31 % distilled water. When applied to the surface of a blueberry, the CXC-B treatment extended the ambient storage time of the fruit to 10 days while substantially reducing its morbidity (P < 0.05) and protecting its texture, flavor, and nutritional integrity. The resulting composite coating provides a promising solution to the problem of blueberry perishability during ambient storage.

Development and characterization of sodium alginate and β-cyclodextrin nanoemulsions encapsulating betel leaf (Piper betle L.) extract for enhanced antimicrobial efficacy against foodborne pathogen

This study aims to investigate the physical stability, droplet size, zeta potential, and antimicrobial properties of nanoemulsions formulated with betel leaf extract using β-cyclodextrin (CD) and sodium alginate (SA) biopolymers. Nanoemulsions with β-cyclodextrin exhibit superior stability at lower temperatures, with limited droplet size, and strong electrostatic repulsion. Morphological images demonstrate the successful encapsulation of betel leaf extract within both biopolymers, highlighting their potential for antimicrobial applications. Both CD and SA nanoemulsions display inhibitory effects on bacterial strains (E. coli, P. aeruginosa, L. monocytogenes, S. aureus, and B. cereus) and fungal growth (A. brasiliensis, R. stolonifer, F. oxysporum, and C. albicans). SA nanoemulsions show higher antimicrobial activity due to H+ ion release, particularly against A. brasiliensis and C. albicans. These findings underscore the potential of betel leaf extract nanoemulsions, especially those with SA, for various antimicrobial applications for sustainable food packaging, highlighting their significance in addressing microbial challenges.

Synergistic effects of xanthan gum and β-cyclodextrin on properties and stability of vegetable oil-based whipped cream

The synergistic effects between xanthan gum (XG) and β-cyclodextrin (β-CD) on the properties and stability of vegetable oil-based whipped cream stabilized by kidney bean protein aggregates was investigated. The visual appearance, SEM, TEM, CLSM, FT-IR and LF-NMR results showed that when the ratio of XG to β-CD in the XG-β-CD complex was appropriate, the hydrogen bonding effect between β-CD and XG was significant enhanced, the three-dimensional network structure has the highest density, the emulsion droplets were the smallest and evenly distributed. The unique tapered microstructure of β-CD acted as a bridge between the hydrophilic and hydrophobic components, effectively preventing the aggregation of oil droplets and establishing a flexible support system between oil droplets; while the flexible molecular structure of XG could support Pickering emulsion system. The XG-β-CD complex had a synergistic effect with protein aggregates, making it ideal for use in whipped cream products. This study explored the stability mechanism of β-CD in the Pickering emulsion-based whipped cream system, providing valuable insights into producing whole plant-based whipped cream by texturizing highly unsaturated oils. This effectively solves the problem of inadequate intake of unsaturated oil for individuals who consume excessive amounts of animal-derived fats.

Encapsulation of apigenin into β-cyclodextrin metal-organic frameworks with high embedment efficiency and stability

In an effort to improve the application performance of apigenin, β-cyclodextrin metal-organic frameworks (BCDMOFs) known as porous materials were used to encapsulate apigenin via an innovative pH-adjusted method. The embedment efficiency had a significant positive pH dependence, reaching a maximum of 79.2 % ± 1.2 % at pH12. Scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis demonstrated formation of apigenin/BCDMOFs composites, and exposure of BCDMOFs pores facilitated high embedment efficiency. Storage stability experiment and kinetic analysis showed degradation of apigenin/BCDMOFs composites was less than that of apigenin alone. Apigenin stability was increased by approximately 18 % after 7 days. BCDMOFs effectively encapsulated and controlled the release of apigenin, and the composites exhibited improved application performance in vitro.

Influence of thermal denaturation on whey protein isolates in combination with chitosan for fabricating Pickering emulsions: a comparison study

Composite natural emulsifiers such as whey protein isolate (WPI) and chitosan (CS) are commonly used in Pickering emulsions to address the effect of thermal deformation of proteins before complexation with CS and heating after complexation. In this study, the properties of WPI and CS composites were investigated by complexing CS with either unmodified WPI or thermally denatured WPI (DWPI). Three types of composite particles were prepared, WPI-CS, DWPI-CS, and D(WPI-CS). Atomic force microscopy revealed that the composite particles formed larger aggregates with increased contour size and surface roughness compared to CS and WPI, whereas the interfacial tension decreased, indicating improved emulsifying abilities. Fourier-transform infrared analysis revealed differences in the hydrogen bonds between CS and WPI/DWPI. All three composite particles formed stable emulsions with droplet sizes of 20.00 ± 0.15, 27.80 ± 0.35, and 16.77 ± 0.51 μm, respectively. Thermal stability experiments revealed that the curcumin emulsion stabilized with WPI-CS and DWPI-CS exhibited relatively better thermal stability than that stabilized with D(WPI-CS). In vitro experiments results indicated that the bioaccessibility of the curcumin emulsion stabilized with WPI-CS was 61.18 ± 0.16%, significantly higher than that of the emulsions prepared with the other two composite particles (p < 0.05). This study will enable the customized design of WPI composite-based Pickering emulsions for application in the food and nutrition industries.

Mechanism for improving the in vitro digestive properties of coconut milk by modifying the structure and properties of coconut proteins with monosodium glutamate

In this paper, the effect of monosodium glutamate (MSG) on coconut protein (CP) solubility, surface hydrophobicity, emulsification activity, ultraviolet spectroscopy and fluorescence spectroscopy was investigated. Meanwhile, the changes in the in vitro digestive properties of coconut milk were also further analyzed. MSG treatment altered the solubility and surface hydrophobicity of CP, thereby improving protein digestibility. Molecular docking showed that CP bound to pepsin and trypsin mainly through hydrogen bonds and salt bridges. And MSG increased the cleavable sites of pepsin and trypsin on CP, thus further improving the protein digestibility. In addition, MSG increased the Na+ concentration in coconut milk, promoted flocculation and aggregation between coconut milk droplets, which prevented the binding of lipase and oil droplets and inhibited lipid digestion. These findings may provide new ideas and insights to improve the digestive properties of plant-based milk.

Effect of xanthan gum (XG) and carrageenan (CG) ratio on casein (CA)-XG-CG ternary complex: Used to improve the stability of liquid diabetes formula food for special medical purposes

Poor storage stability limits the application of liquid diabetes formula food for special medical purposes (L-D-FSMP) in maintaining blood sugar stability in diabetic patients. This work aims to improve the stability of L-D-FSMP by adjusting the ratio of xanthan gum (XG) and carrageenan (CG) in casein (CA)-XG-CG ternary complex. The centrifugal sedimentation rate results showed that the compound ratio of XG and CG had a greater impact on L-D-FSMP storage stability. Transmission electron microscopy (TEM) results showed that the combination of CA, XG and CG occurred. Fourier transform infrared spectroscopy (FTIR) results showed that CA, XG and CG were mainly combined through hydrogen bonds and ionic bonds to form a CA-XG-CG ternary complex. When the ratio of XG and CG was 1:1, the number of disulfide bonds was the largest. The results of three-phase contact angle and emulsifying ability confirmed that when the ratio of XG and CG was 1:1, CA-XG-CG had the strongest emulsifying ability. The particle size distribution and zeta-potential results showed that when the ratio of XG and CG was 1:1, L-D-FSMP had the narrowest particle size distribution range and the strongest stability. These results may provide valuable information for the production of stable L-D-FSMP.

Structural characteristics and emulsifying properties of linear dextrin/eicosapentaenoic acid composites: Effect of the degree of polymerization

This work aimed at building functional emulsions based on the linear dextrins (LDs) emulsion system. The gradient polyethylene glycol (PEG) precipitaion method was used to fractionate LDs into fractions with different degrees of polymerization (DP). A package, and co-precipitation procedure of LDs, and eicosapentaenoic acid (EPA) was used to fabricate LDs-EPA composites. The gas chromatograph, Fourier transform infrared spectroscopy, X-ray diffraction and differential scanning calorimetry analyses affirmed the formation of the LDs-EPA composites. The sizes of these composites were 38.55 nm, 59.14 nm to 80.62 nm, respectively, and they had good amphiphilicity. Compared with LDs, these LDs-EPA composites stabilized Pickering emulsion had higher stability and antioxidant capacity. Their emulsifying ability was positively correlated with the DP values of LDs. Furthermore, the oxidation stability results showed that LDsF10-EPA emulsion had the lowest lipid hydroperoxide (LHs) content, malondioxide (MDA) content and hexal concentration, which were 138.75 mmol kg-1 oil, 15.50 mmol kg-1 oil and 3.83 μmol kg-1 oil, respectively. The study provided a new idea and application values for the application of LDs in emulsion.

Pickering nanoemulsion loaded with eugenol contributed to the improvement of konjac glucomannan film performance

Konjac glucomannan (KGM) is becoming a very potential food packaging material due to its good film-forming properties and stability. However, KGM film has several shortcomings such as low mechanical strength, strong water absorption, and poor self-antibacterial performance, which limits its application. Therefore, in order to enhance the mechanical and functional properties of KGM film, this study prepared Pickering nanoemulsion loaded with eugenol and added it to the KGM matrix to explore the improvement effect of Pickering nanoemulsion on KGM film properties. Compared to pure KGM film and eugenol directly added film, the mechanical strength of Pickering-KGM film was significantly improved due to the establishment of ample hydrogen bonding interactions between the β-cyclodextrin inclusion complex system and KGM. Pickering-KGM film had significant antioxidant capacity than pure KGM film and eugenol directly added KGM film (eugenol-KGM film) (~3.21 times better than KGM film, ~0.51 times better than eugenol-KGM film). In terms of antibacterial activity, Pickering-KGM film had good inhibitory effect on Escherichia coli, Staphylococcus aureus, and Candida albicans, and raspberry preservation experiment showed that the shelf life of the Pickering-KGM film could be extended to about 6 days. To sum up, this study developed a novel means to improve the film performance and provide a new insight for the development and application of food packaging film.

Fabrication and characterization of anthocyanin-loaded double Pickering emulsions stabilized by β-cyclodextrin

Anthocyanins, one of the important water-soluble pigments, are sensitive to environmental factors, which limits the application of anthocyanins in food field. In order to overcome this limitation, double Pickering emulsions stabilized by β-cyclodextrin were developed. The optimum preparation conditions of the emulsions were determined firstly and the performance and structure of emulsions were investigated. Results showed that the optimum preparation conditions of emulsions were the ratio of (W1/O): W2 = 6:4 and 4 % β-cyclodextrin concentration. Optical microscope and confocal laser scanning microscope results confirmed that β-cyclodextrin adsorbed onto the surface of droplets forming stable double Pickering emulsions structure. In vitro gastrointestinal digestion experiments proved that double Pickering emulsions played a controlled-release effect in the small intestine. Rheological analysis proved that the emulsions exhibited elastic properties and demonstrated shear thinning behavior. The emulsions showed excellent stability under centrifugation and thermal conditions. These findings will promote anthocyanins' application in daily diet.

β-Cyclodextrin based Pickering emulsions for α-tocopherol delivery: Antioxidation stability and bioaccessibility

β-Cyclodextrin (β-CD) Pickering emulsion and cinnamaldehyde/β-cyclodextrin (CIN/β-CD) Pickering emulsion were prepared and the influences of oxidation and digestion were investigated. CIN/β-CD composite was better dispersed at the oil-water interface than β-CD. Hydrophobic group of CIN anchored in the oil phase and Hydrophilic hydroxyl group of β-CD extended into the aqueous phase, which allowed CIN/β-CD composite to be oriented at the oil-water interface and formed a more stable oil-water interface layer. β-CD Pickering emulsion was more susceptible to oxidative deterioration than CIN/β-CD Pickering emulsion, its malondialdehyde (MDA) value was as high as 509.41 ± 9.37 nmol/L. Digestion experiment indicated that CIN/β-CD Pickering emulsion was released inner oil phase in the small intestine and free fatty acid (FFA) release rate was 44.32 ± 1.08%. Pharmacokinetic parameters manifested that α-tocopherol peak concentration (Cmax) was 64.32 ± 6.45 mg/L and the peak time (Tmax) appeared at 5 h after administration of CIN/β-CD Pickering emulsion.

Research progress on plant-based protein Pickering particles: Stabilization mechanisms, preparation methods, and application prospects in the food industry

At present, there have been many research articles reporting that plant-based protein Pickering particles from different sources are used to stabilize Pickering emulsions, but the reports of corresponding review articles are still far from sufficient. This study focuses on the research hotspots and related progress on plant-based protein Pickering particles in the past five years. First, the article describes the mechanism by which Pickering emulsions are stabilized by different types of plant-based protein Pickering particles. Then, the extraction, preparation, and modification methods of various plant-based protein Pickering particles are highlighted to provide a reference for the development of greener and more efficient plant-based protein Pickering particles. The article also introduces some of the most promising applications of Pickering emulsions stabilized by plant-based protein Pickering particles in the food field. Finally, the paper also discusses the potential applications and challenges of plant-based protein Pickering particles in the food industry.

Mechanism for improving coconut milk emulsions viscosity by modifying coconut protein structure and coconut milk properties with monosodium glutamate

In this study, monosodium glutamate (MSG) was used to improve the viscosity of coconut milk and the underlying mechanism was explored by investigating the changes in structures of coconut milk protein and physicochemical properties of coconut milk. Firstly, the effect of MSG on the properties of coconut milk was studied. The results showed that MSG increased the pH and zeta potential, reduced the particle size, thus enhancing the droplet interaction and increasing the viscosity of coconut milk. Subsequently, the effects of MSG on the structure and properties of coconut proteins (CP) were investigated. FTIR spectroscopy and circular dichroism spectroscopy showed that MSG was able to change the secondary structure of CP. The results of SDS-PAGE showed that MSG was able to bind to CP to form a larger molecular weight protein, thus improving the viscosity of coconut milk. Moreover, MSG was also able to increase the water-binding capacity of CP. In addition, molecular docking and driving force analysis revealed that hydrogen bonds, electrostatic forces, disulfide bonds, and hydrophobic interactions are the main interactions between MSG and CP. Studying the effect of MSG on the viscosity of coconut milk provides theoretical support to improve the viscosity of other plant protein emulsions.

Surface Functionalization of Sugarcane-Bagasse-Derived Cellulose Nanocrystal for Pickering Emulsion Gel: Microstructural Properties and Stability Efficiency

An environmentally friendly Pickering stabilizer was developed by upcycling sugarcane bagasse (SCB) into a cellulose nanocrystal (CNC), which was subjected to surface modification by using quaternary ammonium compound to enhance its amphiphilic characteristics. The changes in microstructural properties of modified cellulose nanocrystal (m-CNC), such as surface functional group, thermal stability, surface morphology, elemental composition, and particle size distribution were investigated. Results indicated the success of quaternary ammonium compound grafting with the presence of a trimethyl-alkyl chain on the cellulose structure, while the m-CNC preserves the needle-like nanoparticles in length of ~534 nm and width of ~20 nm. The colloidal profile of m-CNC-stabilized oil-water emulsion gels with different concentrations of m-CNC (1-5 wt%), and oil:water (O:W) ratios (3:7, 5:5, 7:3) were examined. The emulsion gel stability study indicated that the optimal concentration of m-CNC (3 wt%) was able to stabilize all the emulsion gels at different O:W ratios with an emulsion index of >80% for 3 months. It is the minimum concentration of m-CNC to form a robust colloidal network around the small oil droplets, leading to the formation of stable emulsion gels. The emulsion gel with O:W ratio (3:7) with 3 wt% of m-CNC rendered the best m-CNC-oil-droplets dispersion. The m-CNC effectively retained the size of oil droplets (<10 μm for 3 months storage) against coalescence and creaming by creating a steric barrier between the two immiscible phases. Furthermore, the emulsion gel exhibited the highest viscosity and storage modulus which was able to prevent creaming or sedimentation of the emulsion gels.

Effects of Heat Treatment on the Structural and Functional Properties of Phaseolus vulgaris L. Protein

The paper presents the effect of heat treatment at 80 °C at different times (3, 5, 7, and 9 min) on the structural and functional properties of Phaseolus vulgaris L. protein (PVP, bean protein powder). Surface and structure properties of PVP after heat treatment were analyzed using a Fourier transform infrared spectrometer (FTIR), a fluorescence spectrophotometer, a visible light spectrophotometer, a laser particle size analyzer, and other equipment. The secondary structure and surface hydrophobicity (H0) of PVP changed significantly after heat treatment: the β-sheet content decreased from 25.32 ± 0.09% to 24.66 ± 0.09%, the random coil content increased from 23.91 ± 0.11% to 25.68 ± 0.08%, and the H0 rose by 28.96-64.99%. In addition, the functional properties of PVP after heat treatment were analyzed. After heat treatment, the emulsifying activity index (EAI) of PVP increased from 78.52 ± 2.01 m2/g to 98.21 ± 1.33 m2/g, the foaming ability (FA) improved from 87.31 ± 2.56% to 95.82 ± 2.96%, and the foam stability (FS) rose from 53.23 ± 1.72% to 58.71 ± 2.18%. Finally, the degree of hydrolysis (DH) of PVP after gastrointestinal simulated digestion in vitro was detected by the Ortho-Phthal (OPA) method. Heat treatment enhanced the DH of PVP from 62.34 ± 0.31% to 73.64 ± 0.53%. It was confirmed that heat treatment changed the structural properties of PVP and improved its foamability, emulsification, and digestibility. It provides ideas for improving PVP's potential and producing new foods with rich nutrition, multiple functions, and easy absorption.

Pickering Emulsion Stabilized by β-Cyclodextrin and Cinnamaldehyde/β-Cyclodextrin Composite

A Pickering emulsion was prepared using β-cyclodextrin (β-CD) and a cinnamaldehyde (CA)/β-CD composite as emulsifiers and corn oil, camellia oil, lard oil, and fish oil as oil phases. It was confirmed that Pickering emulsions prepared with β-CD and CA/β-CD had good storage stability. The rheological experiments showed that all emulsions had G' values higher than G″, thus confirming their gel properties. The results of temperature scanning rheology experiments revealed that the Pickering emulsion prepared with β-CD and CA/β-CD composites had high stability, in the range of 20-65 °C. The chewing properties of Pickering emulsions prepared by β-CD and corn oil, camellia oil, lard, and herring oil were 8.02 ± 0.24 N, 7.94 ± 0.16 N, 36.41 ± 1.25 N, and 5.17 ± 0.13 N, respectively. The chewing properties of Pickering emulsions made with the CA/β-CD composite and corn oil, camellia oil, lard, and herring oil were 2.51 ± 0.05 N, 2.56 ± 0.05 N, 22.67 ± 1.70 N, 3.83 ± 0.29 N, respectively. The texture properties confirmed that the CA/β-CD-composite-stabilized-emulsion had superior palatability. After 28 days at 50 °C, malondialdehyde (MDA) was detected in the emulsion. Compared with the β-CD and CA + β-CD emulsion, the CA/β-CD composite emulsion had the lowest content of MDA (182.23 ± 8.93 nmol/kg). The in vitro digestion results showed that the free fatty acid (FFA) release rates of the CA/β-CD composite emulsion (87.49 ± 3.40%) were higher than those of the β-CD emulsion (74.32 ± 2.11%). This strategy provides ideas for expanding the application range of emulsifier particles and developing food-grade Pickering emulsions with antioxidant capacity.

Preparation of aromatic β-cyclodextrin nano/microcapsules and corresponding aromatic textiles: A review

Fragrance finishing of textiles is receiving substantial interest, with aromatherapy being one of the most popular aspects of personal health care. However, the longevity of aroma on textiles and presence after subsequent launderings are major concerns for aromatic textiles directly loaded with essential oils. These drawbacks can be weakened by incorporating essential oil-complexed β-cyclodextrins (β-CDs) onto various textiles. This article reviews various preparation methods of aromatic β-cyclodextrin nano/microcapsules, as well as a wide variety of methods for the preparation of aromatic textiles based on them before and after forming, proposing future trends in preparation processes. The review also covers the complexation of β-CDs with essential oils, and the application of aromatic textiles based on β-CD nano/microcapsules. Systematic research on the preparation of aromatic textiles facilitates the realization of green and simple industrialized large-scale production, providing needed application potential in the fields of various functional materials.

Composition, morphology, interfacial rheology and emulsifying ability of soy hull polysaccharides extracted with ammonium oxalate and sodium citrate as extractants

BACKGROUND

Soy hull, a by-product of crop processing, is rich in pectin-like polysaccharides that have potential for thickening, gelling and emulsifying applications. The effect of ammonium oxalate (SHPA) and sodium citrate (SHPS) on the conformation, physicochemical properties and emulsifying ability of soy hull polysaccharide (SHP) were investigated.

RESULTS

The composition analysis showed that SHPS had more polysaccharide, protein, and higher molecular weight than SHPA. Images of atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that SHPS molecules appeared spherical bodies with smooth and firm surfaces, while SHPA molecules appeared chain-like bodies with rough and wrinkled surface. At the oil-water interface, SHPS adsorbed faster and formed a more elastic interfacial layer than SHPA. The characterization of the prepared emulsions showed that the SHPS emulsion was a smaller particle size and more stable system within 30 days than SHPA emulsion, especially at the SHPS concentration of 9 mg mL^-1 . Images of cryo-scanning electron microscopy (cryo-SEM) also demonstrated SHPS formed clearer network structure on the surface of the oil droplets, compared to SHPA.

CONCLUSION

Overall, ammonium oxalate and sodium citrate significantly influenced the composition and properties of the SHP. SHPS exhibited a better emulsifying ability than SHPA, which was mainly due to the higher protein content of SHPS and the sodium ion (Na⁺ ) residue of sodium citrate. This study is useful for the extraction and application of SHP and other plant-based polysaccharides. © 2023 Society of Chemical Industry.