Rapid determination of methyl parathion in vegetables using electrochemical sensor fabricated from biomass-derived and β-cyclodextrin functionalized porous carbon spheres

Advanced chemically modified electrodes and platforms in food analysis and monitoring

Electrochemical sensors and electroanalytical techniques become emerging as effective and low-cost tools for rapid assessment of special parameters of the food quality. Chemically modified electrodes are developed to change properties and behaviour, particularly sensitivity and selectivity, of conventional electroanalytical sensors. Within this comprehensive review, novel trends in chemical modifiers material structure, electrodes construction and flow analysis platforms are described and evaluated. Numerous recent application examples for the detection of food specific analytes are presented in a form of table to stimulate further development in both, the basic research and commercial field.

Synergistic Manganese Cobalt Phosphide core-shell for the Electrochemical Detection of Methyl Parathion in Food Sample

The development of a robust electrocatalyst for the electrochemical sensor for hazardous pesticides will reduce its effects on the ecosystem. Herein, we synthesized the robust manganese cobalt phosphide (MnCoP) - Core-shell as an electrochemical sensor for the determination of hazardous pesticide methyl parathion (MP). The MnCoP- Core-shell was prepared with the sustainable self-template route can help with the larger surface area. The Core-shell structure of MnCoP possesses a higher active surface area which increases the electrocatalytic performance and is utilized to improve the electrochemical MP reduction with the synergism of the core and shell structure. Remarkably, it realizes the higher sensitivity (0.014 μA μM-1 cm-2) of MnCoP- Core-shell/GCE achieves towards MP with lower limit of detection (LoD 50 nM) and exceptional recovery rate of MP in vegetable samples are achieved with the differential pulse voltammetry (DPV) technique. The MnCoP- Core-shell electrode reserved their superior electrochemical performances with high reproducibility and repeatability. This prominent activity of the MnCoP core-shell towards the MP in real sample analysis, makes it a promising electrochemical sensor for the detection of MP.

Seafood waste derived carbon nanomaterials for removal and detection of food safety hazards

Nanobiotechnology and the engineering of nanomaterials are currently the main focus of many researches. Seafood waste carbon nanomaterials (SWCNs) are a renewable resource with large surface area, porous structure, high reactivity, and abundant active sites. They efficiently adsorb food contaminants through π-π conjugated, ion exchange, and electrostatic interaction. Furthermore, SWCNs prepared from seafood waste are rich in N and O functional groups. They have high quantum yield (QY) and excellent fluorescence properties, making them promising materials for the removal and detection of pollutants. It provides an opportunity by which solutions to the long-term challenges of the food industry in assessing food safety, maintaining food quality, detecting contaminants and pretreating samples can be found. In addition, carbon nanomaterials can be used as adsorbents to reduce environmental pollutants and prevent food safety problems from the source. In this paper, the types of SWCNs are reviewed; the synthesis, properties and applications of SWCNs are reviewed and the raw material selection, preparation methods, reaction conditions and formation mechanisms of biomass-based carbon materials are studied in depth. Finally, the advantages of seafood waste carbon and its composite materials in pollutant removal and detection were discussed, and existing problems were pointed out, which provided ideas for the future development and research directions of this interesting and versatile material. Based on the concept of waste pricing and a recycling economy, the aim of this paper is to outline current trends and the future potential to transform residues from the seafood waste sector into valuable biological (nano) materials, and to apply them to food safety.

Synchronous activation of praseodymium vanadate/graphitic carbon nitride nanocomposite: A promising electrode material for detection of flavonoid- Quercetin

Flavonoids or phenolic compounds are part of the daily intake of every human being. Though they are positive traders for metabolism, excessive intakes bring about detrimental impacts on human health. Herein, the anti-cancer capacitive nature quercetin (Qc) was electrochemically detected through the rare earth metal-based sphere like praseodymium vanadate (PrVO4) entrapped graphitic carbon nitride (g-CN) as electrode modifiers. The nanocomposite was prepared by the one-pot hydrothermal method and characterized by phase compositional and morphology-based techniques. The existing synergistic nature between the PrV@g-CN (praseodymium vanadate@graphitic carbon nitride) makes them have an enhanced electrochemical response towards the Qc than the individual material. The obtained cyclic voltammogram and differential pulse voltammogram profile show one major oxidation peak which is attributed to the conversion of quercetin to quercetin-o-quinone. The PrV@g-CN/GCE (GCE- glassy carbon electrode) shows a good electrochemical active surface area (A = 110 cm2) and linear range between 0.05 and 252.00 μM with a LOD (limit of detection) of 0.002 µM. Moreover, the PrV@g-CN/GCE exhibits good current retention (94.76 %) around 14 days and appreciable repeatability (RSD- 0.5 %) and reproducibility (RSD- 1.3 %) towards the Qc. The real-time implementation of the proposed sensor exhibits a good recovery range towards the black tea (95.00-98.10 %) and green tea (97.80-99.60 %).

Designing and preparing supramolecular encapsulation systems based on fraxetin and cyclodextrins for highly selective detection of nicotine

Herein, a series of water-soluble supramolecular inclusion complexes (ICs) probes were prepared using cyclodextrins (CDs) and fraxetin (FRA) to detect nicotine (NT) with high selectivity in vitro and in vivo. The FRA/CD ICs prepared through the saturated solution method exhibited excellent water solubility, stability, and biocompatibility. A clear host-guest inclusion model was provided by the theoretical calculations. The investigation revealed that NT was able to enter into the cavities of FRA/β-CD IC and FRA/γ-CD IC, and further formed charge transfer complexes with FRA in the CD cavities, resulting in a rapid and highly selective fluorescence-enhanced response with the lowest detection limits of 1.9 × 10-6 M and 9.7 × 10-7 M, and the linear response ranged from 0.02 to 0.3 mM and 0.01-0.05 mM, respectively. The IC probes showed good anti-interference performance to common interferents or different pH environments, with satisfactory reproducibility and repeatability of response to NT. Furthermore, the potentiality of the probes was confirmed through fluorescence imaging experiments using human lung cancer cells and the lung tissue of mice. This study offers a fresh perspective for detecting NT in environmental and biomedical analysis.

Hinge-like paper-based dual-channel enzyme-free ratiometric fluorescent microfluidic platform for simultaneous visual detection of carbaryl and glyphosate

On-site multi-pesticide residues detection is particularly urgent and challenging. Here, we fabricated an enzyme-free ratiometric fluorescent detection system in combination with a hinge-like dual-channel 3D microfluidic paper analytical device (3D μPAD) for simultaneous visual detection of carbaryl and glyphosate. Blue-emission 1-naphthol (Em. 470 nm) was hydrolyzed from carbaryl, while yellow-emission 2,3-diaminophenazine (Em. 570 nm) was produced with the aid of Cu2+ for glyphosate sensing. Inner-filter effect between 1-naphthol or 2,3-diaminophenazine and green-emission carbon dots (Em. 510 nm) realized two ratiometric fluorescent detection systems. Remarkable color variation of green-blue for carbaryl (50.00-1100 μΜ) and yellow-green for glyphosate (5.00-600 μΜ) were observed on a dual-channel 3D μPAD without crosstalk. Their detection limits were 1.11 and 0.63 μΜ, respectively. The strategy realized simultaneous visual detection of carbaryl and glyphosate in food/herbal with excellent accuracy (spiked recoveries, 91.00-107.2%), high precision (RSD ≤ 8.43%), and superior selectivity.

Room-temperature ultrasonic-assisted self-assembled synthesis of silkworm cocoon-like COFs@GCNTs composite for sensitive detection of diuron in food samples

Diuron (DU) exhibits good weed control effect but possesses strong hazard to human health, thereby designing a fast and sensitive method to detect DU is highly urgent. Herein, we report the ultrasonic-assisted self-assembly synthesis of porous covalent organic frameworks (COFs) spheres@graphitized multi-walled carbon nanotubes (GCNTs) composite based on π-π conjugation effect at room temperature, which was employed for DU determination. For the COFs@GCNTs composite, COFs with ultrahigh specific surface area shows strong adsorption ability towards DU, whereas GCNTs with favorable conductivity help to form the 3D interconnected conductive network around COFs spheres, thereby effectively compensating for the poor conductivity of COFs. Because of the synergistic effect between COFs and GCNTs, the developed sensor presented a low detection limit of 0.08 µM in the concentration range of 0.30-18.00 µM. Moreover, the actual sample analysis in the tomato and cucumber yielded satisfactory recoveries (96.40%-103.20%), proving reliable practicability of the developed sensor.

Selection and electrochemical-sensor application of an DNA-aptamer for methyl parathion detection

An aptamer-based electrochemical sensor for methyl parathion (MP) detection is herein reported. The modified magnetic beads-systematic evolution of ligands by enrichment (MB-SELEX) was used to select the MP aptamer. After 14 rounds of selection, the aptamer (MPapta-6) with high affinity for MP was obtained, and its dissociation constant (K_d) was 39.66 ± 14.73 μM. Using the MPapta-6, the ultra-sensitive electrochemical sensor based on PLL-BP and AuNPs was constructed. The linear range of MP was 1-10⁵ pM and detection limit (LOD) was as low as 0.49 pM. In addition, the application of the sensor in water samples was verified, and the recovery rate was 96.6%-103.5%. The results from this study showed that this strategy could be applied in practical detection.

Cyclodextrin Inclusion Complexes and Their Application in Food Safety Analysis: Recent Developments and Future Prospects

Food safety issues are a major threat to public health and have attracted much attention. Therefore, exploring accurate, efficient, sensitive, and economical detection methods is necessary to ensure consumers' health. In this regard, cyclodextrins (CDs) are promising candidates because they are nontoxic and noncaloric. The main body of CDs is a ring structure with hydrophobic cavity and hydrophilic exterior wall. Due to the above characteristics, CDs can encapsulate small guest molecules into their cavities, enhance their stability, avoid agglomeration and oxidation, and, at the same time, interact through hydrogen bonding and electrostatic interactions. Additionally, they can selectively capture the target molecules to be detected and improve the sensitivity of food detection. This review highlights recent advances in CD inclusion technology in food safety analysis, covering various applications from small molecule and heavy metal sensing to amino acid and microbial sensing. Finally, challenges and prospects for CDs and their derivatives are presented. The current review can provide a reference and guidance for current research on CDs in the food industry and may inspire breakthroughs in this field.