Portable and on-site electrochemical sensor based on surface molecularly imprinted magnetic covalent organic framework for the rapid detection of tetracycline in food

Magnetic field-assisted surface engineering technology for active regulation of Fe3O4 medium to enable the laccase electrochemical biosensing of catechol with visible stripe patterns

BACKGROUND

Catechol (CC), a prevalent phenolic compound, is a byproduct in various agricultural, chemical, and industrial processes. CC detection is crucial for safeguarding water quality and plays a pivotal role in enhancing the overall quality of life of individuals. Electrochemical biosensors exhibit rapid responses, have small sizes, and can be used for real-time monitoring. Therefore, the development of a fast and sensitive electrochemical biosensor for CC detection is crucial.

RESULT

In this study, a laccase-based electrochemical biosensor for detection of CC is successfully developed using Fe3O4 nanoparticles as medium and optimized by applying a magnetic field. This research proposes a unique strategy for biosensor enhancement by actively controlling the distribution of magnetic materials on the electrode surface through the application of a magnetic field, resulting in a visibly alternating stripe pattern. This approach effectively disperses magnetic particles, preventing their aggregation and reducing the boundary layer thickness, enhancing the electrochemical response of the biosensor. After fabrication condition optimization, CC is successfully detected using this biosensor. The fabricated sensor exhibits excellent performance with a wide linear detection range of 10-1000 μM, a low detection limit of 1.25 μM, and a sensitivity of 7.9 μA/mM. The fabricated sensor exhibits good selectivity and reliable detection in real water samples. In addition, the laccase-based sensor has the potential for the fast and accurate monitoring of CC in olive oil.

SIGNIFICANCE

The magnetic field optimization in this study significantly improved the performance of the electrochemical biosensor for detecting CC in environmental samples. Overall, the sensor developed in this study has the potential for fast and accurate monitoring of CC in environmental samples, highlighting the potential importance of a magnetic field environment in improving the performance of catechol electrochemical biosensors.

Molecularly imprinted polymers and porous organic frameworks based analytical methods for disinfection by-products in water and wastewater

Disinfection by-products (DBPs) with heritage toxicity, mutagenicity and carcinogenicity are one kind of important new pollutants, and their detection and removal in water and wastewater has become a common challenge facing mankind. Advanced functional materials with ideal selectivity, adsorption capacity and regeneration capacity provide hope for the determination of DBPs with low concentration levels and inherent molecular structural similarity. Among them, molecularly imprinted polymers (MIPs) are favored, owing to their predictable structure, specific recognition and wide applicability. Also, metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) with unique pore structure, large specific surface area and easy functionalization, attract increasing interest. Herein, we review recent advances in analytical methods based on the above-mentioned three functional materials for DBPs in water and wastewater. Firstly, MIPs, MOFs and COFs are briefly introduced. Secondly, MIPs, MOFs and COFs as extractants, recognition element and adsorbents, are comprehensively discussed. Combining the latest research progress of solid-phase extraction (SPE), sensor, adsorption and nanofiltration, typical examples on MIPs and MOFs/COFs based analytical and removal applications in water and wastewater are summarized. Finally, the application prospects and challenges of the three functional materials in DBPs analysis are proposed to promote the development of corresponding analytical methods.

Dual-source signal amplification electrochemiluminescence sensor combined with molecularly imprinted polymers for the imidacloprid detection

A novel lanthanide metal-organic-gel (MOG)-derived material/nitrogen-doped graphdiyne (Tb-Ru-MOG/CeO2/N-GDY) composite with a dual-source signal amplification strategy was prepared and used to construct a molecularly imprinted sensor based on bifunctional monomers for the detection of imidacloprid (IMI) using electrochemiluminescence (ECL). In a green reaction environment, terbium (III) (Tb3+) can undergo multiple coordination reactions with 4'-(4-carboxyphenyl)-2,2':6',2″-terpyridine (Hcptpy) and tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride (Ru(dcbpy)32+), and combine with ceria nanoparticles (CeO2 NPs) to form Tb-Ru-MOG/CeO2. Within the Tb-Ru-MOG/CeO2 framework, energy transfer from the double ligands can sensitize the central Tb3+, triggering a distinct antenna effect and energy-transfer, and its polyporous configuration offered a nanoconfined space for Ce3+/Ce4+ to effectively catalyze coreactant radicals (S2O82-), leading to in-situ endogenous activation ECL reactions. The conductive N-GDY accelerated electron movement and increased the loading on the electrode surface, enhancing the exogenous excitation of the ECL signals. Leveraging the synergistic effect of the bifunctional monomer, the synthesized molecularly imprinted polymers (MIPs) ECL sensor demonstrated a wide detection range from 10 nM to 10,000 nM for IMI, with a limit of detection (LOD) of 1.37 nM, showcasing an innovative concept for the dual-source strategy of signal amplification in integrated ECL composites to analyze food and environmental hazards.

An antifouling electrochemical aptasensor based on a polydopamine-polyzwitterion copolymer for tetracycline analysis

Matrix interference resulting from the nonspecific adsorption of non-target components, particularly proteins (fouling), onto sensor surfaces poses a persistent challenge in electrochemical detection of food hazards. The development of antifouling sensor surfaces presents a viable approach to mitigate nonspecific adsorption. In this study, a novel antifouling electrochemical aptasensor, utilizing a zwitterionic polymer, was developed for the sensitive, accurate, and selective detection of tetracycline (TC) in milk. This sensor employs a poly (dopamine)-poly (sulfobetaine methacrylate) (PDA-PSBMA) antifouling copolymer, which is synthesized through an in-situ initiated copolymerization of dopamine on the sensor's surface. Subsequently, the thiol-containing aptamers were immobilized onto the PDA-PSBMA coating through a Michael addition reaction with the poly(dopamine). The resulting antifouling electrochemical aptasensor exhibited robust antifouling performance in various single protein solutions and diluted milk samples, coupled with sensitive and selective recognition of TC. The sensor demonstrated a broad linear response range of 0.1-1000.0 ng mL-1 and a low limit of detection (LOD) of 68.0 pg mL-1. The antifouling electrochemical aptasensor proved effective in assaying TC in diluted milk, with recoveries ranging from 100.0 % to 104.4 %, eliminating the need for additional pretreatments due to its exceptional resistance to nonspecific adhesion.

Lateral flow assemblies and allied application of carbon quantum dots derived from cigarette tobacco in biosensing, anticounterfeiting and fluorescent films: Theoretical and experimental overview

The bio-sensing activity of fluorescence based nanoprobes is one of the most significant aspects to scrutinize the analytical pursuance in modern security and lateral flow assays. Herein, potent transmogrification of waste cigarette tobacco into fluorescent carbon quantum dots (CQDs) has been achieved by calcination approach. The waste transformation to CQDs holds diverse benefits, comprising high quantum yield, low toxicity and scale up synthesis. The developed CQDs were able to identify tetracycline with phenomenal selectivity and sensitivity through fluorescence based method. The sensing mechanism was fully explored using Density Functional Theory (DFT) and Molecular docking studies. Governing features comprising tetracycline concentration, interfering studies, and real water analysis on the identification of tetracycline were also investigated. Along with, the prepared CQDs act as colorimetric probe, facilitating the detection of tetracycline with the naked eye. The lateral flow device was constructed for the on-site detection of tetracycline in real water samples. To the best of our knowledge, the present work represents a novel approach to designing CQDs and demonstrates their significant potential for application in anticounterfeiting measures and lateral flow devices. This work holds significant prospective as the prepared CQDs was fully utilized to its maximum usage in developing films and fluorescent anti-counterfeiting applications. Concisely, current work opens up distinctive opportunities for rapid on-site, real-time and visualized surveillance of tetracycline using CQDs prepared with a quite simple green approach.

Developing a novel magnetic organic polymer for selective extraction and determination of 16 macrolides in water and honey samples

A novel magnetic organic polymer Fe3O4@SiO2@Tb-PDAN was designed and synthesized, which was used as an adsorbent for magnetic solid-phase extraction (MSPE) of 16 macrolides (MALs) in water and honey. The synthesized adsorbent was characterized using techniques including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Then several parameters of the extraction process were further optimized. Under the optimized conditions, an MSPE-LC-MS/MS method was established for extraction and determination of 16 MALs, which showed good linearity (r ≥ 0.999), low limits of detection (0.001-0.012 μg L-1 for water and 0.001-0.367 μg kg-1 for honey) and satisfactory recoveries (70.02-118.91%) with the relative standard deviations (RSDs) lower than 10.0%. This established method was then successfully applied to detect MALs in real samples, which suggested that Fe3O4@SiO2@Tb-PDAN was a potential magnetic adsorbent for efficient extraction and analysis of MALs.

A direct electrochemical sensor based on covalent organic frameworks/platinum nanoparticles for the detection of ofloxacin in water

A direct electrochemical sensor based on covalent organic frameworks (COFs)/platinum nanoparticles (PtNPs) composite was fabricated for the detection of ofloxacin (OFX) in water. Firstly, the COF material was synthesized via the condensation reaction of 1,3,5-tris(4-aminophenyl)benzene (TAPB) with terephthalaldehyde (TPA) and integrated with PtNPs by in situ reduction. Then, TAPB-TPA-COFs/PtNPs composite was loaded onto the surface of the glassy carbon electrode (GCE) by drip coating to construct the working electrode (TAPB-TPA-COFs/PtNPs/GCE). The electrochemical performance of TAPB-TPA-COFs/PtNPs/GCE showed a significant improvement compared with that of TAPB-TPA-COFs/GCE, leading to a 3.2-fold increase in the electrochemical signal for 0.01 mM OFX. Under optimal conditions, the TAPB-TPA-COFs/PtNPs/GCE exhibited a wide linear range of 9.901 × 10-3-1.406 µM and 2.024-15.19 µM with a detection limit of 2.184 × 10-3 µM. The TAPB-TPA-COFs/PtNPs/GCE-based electrochemical sensor with excellent performance provides great potential for the rapid and trace detection of residual OFX.

Aptamer tuned nanozyme activity of nickel-metal-organic framework for sensitive electrochemical aptasensing of tetracycline residue

It is urgently needed to develop high-performance method for tetracycline (TC) analysis to meet the growing concerns about food safety. Herein, a MOF of Ni2+-2,3,6,7,10,11-hexahydroxytriphenylene (Ni-HHTP) with peroxidase activity has been prepared and coated on a screen printing electrode, followed by non-covalent adsorption of tetracycline aptamer (TC-Apt) through the π-stacking. The spectroscopic and electrochemical assays show that TC-Apt can effectively enhance the nanozyme activity of Ni-HHTP using 3,3',5,5'-tetramethylbenzidine (TMB)/H2O2 as the probe. Upon binding with TC, the configuration of TC-Apt is changed and desorbs from the Ni-HHTP, resulting in the decrease of the nanozyme activity of aptasensor. Based on this principle, the target TC can be analyzed in concentrations ranging from 10 pM to 1.0 μM, with a detection limit of 1.9 pM. The aptsensor is also applicable for TC analysis in fresh Ctenopharyngodon idella meat and milk, which provides a new approach for TC residue monitoring in food.

MXene fibers-based molecularly imprinted disposable electrochemical sensor for sensitive and selective detection of hydrocortisone

A molecularly imprinted electrochemical sensor based on MXene fibers was proposed in this work. Firstly, the wet spinning technique prepared MXene fibers with a large aspect ratio, which can make the sheet-like MXene uniformly arranged, avoiding the agglomeration of MXene and improving the electrical conductivity. Afterwards, molecularly imprinted polymers (MIPs) with specific recognition sites were synthesized on the surface of MXene fibers using the electro-polymerization method. The electrochemical sensor utilized the advantages of MXene fibers and molecular imprinting techniques to gain superior selectivity and sensitivity of hydrocortisone (HC). Electrochemical tests with different concentrations of HC (0.5 nM-10.0 μM) under optimal measurement conditions exhibited excellent linearity and a limit of detection (LOD) of 0.17 nM. Furthermore, the electrochemical sensor displayed excellent selectivity, interference resistance, reproducibility, stability and outstanding application performance in serum. This work has promising applications in trace analysis in real sample.

Recent Advances in and Applications of Electrochemical Sensors Based on Covalent Organic Frameworks for Food Safety Analysis

The international community has been paying close attention to the issue of food safety as a matter of public health. The presence of a wide range of contaminants in food poses a significant threat to human health, making it vital to develop detection methods for monitoring these chemical contaminants. Electrochemical sensors using emerging materials have been widely employed to detect food-derived contaminants. Covalent organic frameworks (COFs) have the potential for extensive applications due to their unique structure, high surface area, and tunable pore sizes. The review summarizes and explores recent advances in electrochemical sensors modified with COFs for detecting pesticides, antibiotics, heavy metal ions, and other food contaminants. Furthermore, future challenges and possible solutions will be discussed regarding food safety analysis using COFs.

Preparation of covalent organic framework-based nanofibrous films with temperature-responsive release of thymol for active food packaging

Thymol (THY) is commonly used in active food packaging, however because of its high volatility, poor water solubility, and strong aromatic odor, the application of THY is facing challenges. Herein, covalent organic frameworks (COFs) were synthesized in room temperature by asymmetric monomer exchange method for THY encapsulation, and solution blow spinning was used to fabricate the THY@COF/polycaprolactone (PCL) nanofibrous films. The synthesized COFs had a large specific surface area, porous structure, and loading capacity of 30.35% for THY, and THY@COFs possessed good thermal stability. Characterization analysis showed that THY@COFs were successfully incorporated into the PCL films and increased the barrier property of the films. Besides, the films showed good biocompatibility and antibacterial activity. Moreover, THY@COF/PCL films exhibited temperature-responsive THY release profiles, which is important for practical preservation applications, especially for preserving food in warm environments. Overall, THY@COF/PCL films possess promising potential in active food packaging.

MOF/COF heterostructure hybrid composite-based molecularly imprinted photoelectrochemical sensing platform for determination of dibutyl phthalate: A further expansion for MOF/COF application

A novel metal-organic framework (MOF)/covalent-organic framework (COF) heterostructure hybrid composite (NH₂-UiO-66/TpPa-1-COF) with excellent photoactivity was developed, which further acted as the photoelectrochemical sensitized layer of a molecularly imprinted photoelectrochemical (MIP-PEC) sensor for extremely sensitive and selective determination of dibutyl phthalate (DBP). The NH₂-UiO-66/TpPa-1-COF was synthesized using a simple one-step solvothermal method, which showed improved photocurrent response owing to heterojunction formation, favorable energy-band configuration and strong light absorption capacity. To improve the sensing performance, molecularly imprinted polymer (MIP) was developed by sol-gel polymerization method as the recognition component of PEC sensor. The specific binding of imprinting sites towards DBP could block the electron transfer, causing decreased photocurrent response of the MIP-PEC sensor. The MIP-PEC sensor showed a wide detection range from 0.1 nmol L^-1 to 100 μmol L^-1 with a limit of detection of 3.0 × 10^-11 mol L^-1 under optimal conditions. Meanwhile, the proposed MIP-PEC sensor showed good stability, selectivity, reproducibility, and applicability in real samples. This is the first attempt to apply MOF/COF heterostructure hybrid composite for MIP-PEC sensor construction, providing new insight into the potential applications of microporous crystalline framework heterostructure hybrid composite in the sensing field.

Covalent Organic Frameworks-Based Electrochemical Sensors for Food Safety Analysis

Food safety is a key issue in promoting human health and sustaining life. Food analysis is essential to prevent food components or contaminants causing foodborne-related illnesses to consumers. Electrochemical sensors have become a desirable method for food safety analysis due to their simple, accurate and rapid response. The low sensitivity and poor selectivity of electrochemical sensors working in complex food sample matrices can be overcome by coupling them with covalent organic frameworks (COFs). COFs are a kind of novel porous organic polymer formed by light elements, such as C, H, N and B, via covalent bonds. This review focuses on the recent progress in COF-based electrochemical sensors for food safety analysis. Firstly, the synthesis methods of COFs are summarized. Then, a discussion of the strategies is given to improve the electrochemistry performance of COFs. There follows a summary of the recently developed COF-based electrochemical sensors for the determination of food contaminants, including bisphenols, antibiotics, pesticides, heavy metal ions, fungal toxin and bacterium. Finally, the challenges and the future directions in this field are discussed.

Fabrication of an imprinted polymer based graphene oxide composite for label-free electrochemical sensing of Sus DNA

An innovative label-free electrochemical sensor was developed for selective detection of Sus (pig) Deoxyribonucleic acid (DNA) through adenine imprinted polypyrrole fabricated on the surface of allyl mercaptan modified GO (MIP/mGO).