Soy oil and SPI based-oleogels structuring with glycerol monolaurate by emulsion-templated approach: Preparation, characterization and potential application

Preparation of soybean protein isolate-ester emulsifier oleogels and comparative study of their structure and properties

In recent years, oleogel as a viscoelastic semi-solid to replace trans fatty acids and reduce saturated fatty acids in food has received more and more attention. Herein, an emulsion template method was used to produce soybean oil-based oleogels with seven different ester emulsifiers and soy protein isolate as oleogelators. The chemical and physical characteristics of oleogels produced via various crosslinking factors were comparatively examined. Results revealed that all oleogels generated β-type needle crystals and exhibited high oil-holding capacity (>80 %), among which glycerol monolaurate G2 and diacetyl tartaric acid ester of mono-diglycerides G6 exhibited the strongest oil-holding capacity (96.6 % and 96.2 %, respectively). Furthermore, all oleogels exhibited strong thixotropic recovery, high thermal stability, as well as high gel strength (G' > G''). Of these, G2 and G6 exhibited the highest thixotropic recovery rates at 74.54 % and 78.19 %, respectively. Additionally, in accelerated oxidation trials, the peroxide value and thiobarbituric acid reactive substances of all oleogels had low oxidation rates, indicating high oxidative stability. These results contribute to a better understanding of oleogels for formulating trans-free and low-saturated foodstuffs with desired physical and functional properties.

Fabrication, characterization, and fat substitution application in chocolate spreads of methyl cellulose and xanthan gum foam-templated oleogels

Food-grade oleogels were prepared by lyophilizing the foam-template of methyl cellulose (MC) and xanthan gum (XG). The cryogels prepared using MC exhibited low density, high porosity and firmness, as well as high oil absorption capacity (OAC) and oil binding capacity (OBC). Furthermore, the addition of XG improved properties of cryogels. As the concentrations of MC and XG were incremented, notable enhancements in the cryogels' density and firmness were observed, accompanied by a corresponding decrease in porosity. Upon attaining MC concentration of 1.2 % and XG concentration of 0.3 %, the OBC of the cryogels surpassed 90 %. SEM images revealed that the cryogels possessed a dense and highly uniform porous network structure. Furthermore, oleogels formulated using the higher viscosity variant of MC (designated as MC3) exhibited greater firmness and apparent viscosity, resulting in the formation of a robust network structure that demonstrated excellent thermal stability. The incorporation of oleogels into chocolate spreads significantly enhanced textural and rheological characteristics, while simultaneously decreasing their enthalpy of crystallization. Notably, the partial substitution of these oleogels in the spreads yielded a crystalline morphology that was indistinguishable from those prepared solely with saturated fats, indicating a successful integration and preservation of desirable structural attributes.

MP-based plant oleogels structuring with various unsaturated oil: Fabrication, characterization, and in-vitro digestion

Recently, research on the plant-based oleogels, has gained significant attention as a promising approach for oil formulation. In this research, emulsion-templated technique utilizing millet prolamin (MP) as oleogelator was employed for crafting edible oleogels from various vegetable oils of varying degree of unsaturation. The focus of the study was to examine the formation process, structural characteristics, rheological properties, and lipid digestion of these oleogels. The results indicated that MP-based oleogels exhibited uniform morphology and low oil loss. The construction of the oleogel network could be attributed to hydrogen bonding between oleogelator molecules, hydrophobic interactions among the oleogelator molecules and between the oleogelator and oil, as well as van der Waals forces between the oil molecules themselves. Increasing MP concentration formed a denser oleogel network, and exhibited greater elastic moduli (G') and viscous moduli (G''). Additionally, 8 % MP oleogel prepared from flaxseed oil with high linolenic acid showed low oil loss, high hardness and efficient release of free fatty acids. These results indicated the potential of MP as an oleogelator in creating oleogels, and it is promising for fabricating trans-free and low-saturated oleogel-based products.

Development and characterization of wax-bovine bone protein-grapeseed oil composite oleogels: Experimental and molecular simulation studies

Three new types of composite oleogel formulations were designed. Specifically, oleogels were prepared using 90% grapeseed oil as the oil phase and carnauba wax (CW)/beeswax/rice bran wax-bovine bone protein (BBP) as gelators. All samples were solid and had an oil-binding capacity of >90%. BBP addition considerably improved the waxy texture of the oleogel and had an important effect on the crystalline network. X-ray diffractometry indicated that BBP increased the β'-crystal content. All samples showed sol-gel thermodynamic behavior under temperature scanning. Fourier-transform infrared spectroscopy and molecular docking confirmed the formation of noncovalent interactions dominated by van der Waals forces during the development of the oleogel. The optimal components of the three oleogels exhibited an excellent effect of slowing down the release of free fatty acids. This study could serve as a reference for the development and application of wax-protein as a new binary gelator in the food industry.

Fabrication of novel polysaccharides and glycerol monolaurate based camellia oil composite oleogel: Application in wound healing promotion

In this study, a novel camellia oil composite oleogel (SX@G-CO) was prepared by a combination of direct dispersion and emulsion-templated methods using polysaccharides (sodium alginate and xanthan gum, ratio in 4:6) as oleogelators and glycerol monolaurate (GML, 7 wt%) as gel-enhancer. The comparative experiments revealed that the polysaccharides could effectively enhance the densification of the three-dimensional network structure of the oleogel through hydrogen bonding and electrostatic interactions, and significantly improve its thermal stability, rheological properties (adhesive strength 49,243.6 mPa•s, viscosity recovery rate 94.6 %) and oil binding capacity (80.6 %). The introduction of GML further enriched the crystal diversity of the oleogel and imparted excellent antimicrobial ability (nearly 100 % inhibition effect on E.coli). Furthermore, the in vitro experiments demonstrated that the synergistic effect of polysaccharides and GML significantly enhanced the anti-inflammatory, antioxidant, cell migration and proliferation abilities of SX@G-CO oleogel compared with GML-CO and SX-CO oleogels. In addition, SX@G-CO oleogel has also been demonstrated to effectively promote full-thickness burn healing in mice by reducing bacterial infection and inflammatory response, regulating free radical levels, and promoting neovascularization in vivo, with effects comparable to marketed ointment. SX@G-CO oleogel as a bioactive molecule-polysaccharides composite has potential clinical application in burn wound repair.

Composite-structure oleogels constructed by glycerol monolaurate and whey protein isolate: Preparation, characterization and in vitro digestion

The Glycerol monolaurate (GML) oleogel was induced using Camellia oil by slowly raising the temp to the melting point (MP) of GML. Whey protein isolate (WPI) solution with different ratios was composited with GML oleogel by emulsion template methods, forming dense spines and honeycomb-like networks and impressed with an adjustable composite structure. Textural results showed that compared with single GML-based oleogels, the GML/WPI composite oleogels had the advantages of high hardness and molding, and structural stability. The composite oleogels had moderate thermal stability and maximal oil binding (96.36%). In particular, as up to 6 wt% GML/WPI, its modulus apparent viscosity was significantly increased in rheology and similar to commercial fats. Moreover, it achieved the highest release of FFA (64.07%) and the synergy provided a lipase substrate and reduced the body's burden. The resulting composite oleogel also showed intermolecular hydrogen bonding and van der Waals force interactions. These findings further enlarge the application in the plant and animal-based combined of fat substitutes, delivery of bioactive molecules, etc., with the desired physical and functional properties according to different proportions.

Food-grade emulsion gels and oleogels prepared by all-natural dual nanofibril system from citrus fiber and glycyrrhizic acid

The natural dual nanofibril system consisting of the rigid semicrystalline nanofibrils disintegrated from citrus fiber (CF) and soft semiflexible nanofibrils self-assembled from glycyrrhizic acid (GA) has been recently shown to be effective structural building blocks for fabrication of emulsion gels. In this work, the effect of the CF nanofibrils prepared by different mechanical disintegration approaches (i.e., high-pressure microfluidization and hydrodynamic cavitation) on the interfibrillar CF-GA interactions and the subsequent formation and properties of emulsion gels were investigated, with the aim of evaluating the potential of the dual nanofibril-stabilized emulsion gels as templates for synthesizing all-natural edible oleogels. The obtained results demonstrate that compared to the cavitation, the high-pressure microfluidization is more capable of generating CF nanofibrils with a higher degree of nanofibrillation and individualization, thus forming a denser CF-GA gel network with higher viscoelasticity and structural stability due to the stronger multiple intrafibrillar and interfibrillar interactions. The emulsion gels stabilized by the dual nanofibril system are demonstrated to be an efficient template to fabricate solid-like oleogels, and the structural properties of the oleogels can be well tuned by the mechanical disintegration of CF and the GA nanofibril concentration. The prepared oleogels possess high oil loading capacity, dense network microstructure, superior rheological and large deformation compression performances, and satisfactory thermal stability, which is attributed to the compact and ordered CF-GA dual nanofibrillar network via multiple hydrogen-bonding interactions in the continuous phase as well as at the droplet surface. This study highlights the unique use of all-natural dual nanofibrils to develop oil structured soft materials for sustainable applications.

Konjac glucomannan-assisted fabrication of stable emulsion-based oleogels constructed with pea protein isolate and its application in surimi gels

Konjac glucomannan (KGM) is widely used as a stabilizer for the structuring of highly unsaturated oils. This study aimed to investigate the changes in structure and functional properties of soybean oil - based oleogels (emulsion template method) prepared with different amounts of KGM-modified pea isolate protein (PPI). The findings revealed that the oleogels formed three - dimensional networks through van der Waals interactions and hydrogen bonding between the stretched PPI and KGM. As the amount of KGM increased, the oil droplets were more uniformly dispersed within the continuous PPI - KGM rigid network, especially when the ratio of PPI to KGM was 4:1. This formulation also showed the highest thixotropy (73.2 %) and the best oil binding capacity (94 %). Cryo - SEM revealed that the oleogel - prepared surimi gels successfully enclosed oil droplets in a dense matrix through a dual stabilization mechanism. Additionally, the incorporation of oleogels significantly improved the textural properties of surimi in comparison to directly adding oil.

A comprehensive review of medium chain monoglycerides on metabolic pathways, nutritional and functional properties, nanotechnology formulations and applications in food system

A large and growing body of literature has investigated the broad antibacterial spectrum and strong synergistic antimicrobial activity of medium chain monoglycerides (MCMs) have been widely investigated. Recently, more and more researches have focused on the regulation of MCMs on metabolic health and gut microbiota both in vivo and in vitro. The current review summarizes the digestion, absorption and metabolism of MCMs. Subsequently, it focuses on the functional and nutritional properties of MCMs, including the antibacterial and antiviral characteristics, the modulation of metabolic balance, the regulation of gut microbiota, and the improvement in intestinal health. Additionally, we discuss the most recent developments and application of MCMs using nanotechnologies in food industry, poultry and pharmaceutical industry. Additionally, we analyze recent application examples of MCMs and their nanotechnology formation used in food. The development of nanotechnology platforms facilitating molecular encapsulation and functional presentation contribute to the application of hydrophobic fatty acids and monoglycerides in food preservation and their antibacterial effectiveness. This study emphasizes the metabolic mechanisms and biological activity of MCMs by summarizing the prevailing state of knowledge on this topic, as well as providing insights into prospective techniques for developing the beneficial applications of MCMs to realize the industrialized production.

A novel edible solid fat substitute: Preparation of biphasic stabilized bigels based on glyceryl monolaurate and gellan gum

Solid fats contribute to a delicate and pleasant flavor for food, but its excessive intake increases the risk of cardiovascular disease. Bigel is considered a promising solid fat substitute as it significantly reduces fat content while meeting consumer demands for food flavor and a balanced diet. In this study, bigels were prepared by mixing glyceryl monolaurate-based oleogel (10 wt%) and gellan gum-based hydrogel (0.8 wt%) at ratios of 1:3, 1:1, and 3:1. The microscopic results indicated that the oleogel/hydrogel ratios influenced the structure of bigels, forming oil-in-water, bi-continuous, and water-in-oil bigels with the increase of oleogel proportion, respectively. All bigels presented a semi-solid structure dominated by elasticity, and their hardness, gumminess, chewiness, and cohesiveness increased with the enhancement of hydrogel proportion. Among them, the bigels (S25:L75 and S25:H75) prepared with an oleogel/hydrogel ratio of 1:3 showed excellent freeze-thaw stability, maintaining an oil holding capacity of >95 % after three freeze-thaw cycles. Meanwhile, they also presented good oxidative stabilities, where the peroxide values and malondialdehyde contents were below 0.07 g/100 g and 1.5 mg MDA/kg at 12 d, respectively. Therefore, S25:L75 and S25:H75 are expected to be green, low-cost, healthy, and sustainable alternatives to solid fats.

Improvement in texture and color of soy protein isolate gel containing capsorubin and carotenoid emulsions following microwave heating

The effects of microwave heating on the properties and pigment release of soybean protein isolate (SPI) emulsion gel and hydrogel were investigated. The properties of the samples were analyzed by rheology and texture. The results showed that the hardness of the emulsion gel was lower than that of the hydrogel, but the cohesiveness was the opposite. The hydrogen bonding and electrostatic interaction between SPI and soybean soluble polysaccharide (SSPS) enhanced the thermal stability of the gel, and the enthalpy values were the lowest. In addition, a chroma meter was used to assess the slow-release effect of pigment, with results indicating that the emulsion gel was more red and yellow than the hydrogel; the values of a* and b* were reduced with the extension of heating time, indicating that the emulsion had a good protective effect on carotenoids and capsorubin, which was helpful to the application of the pigment in food.

A review of different frying oils and oleogels as alternative frying media for fat-uptake reduction in deep-fat fried foods

Purpose

This review aims to examine the potential of oleogels as a frying medium to decrease oil absorption during deep-frying and enhance the nutritional and energy content of foods. By investigating the factors influencing oil incorporation during deep-frying and examining the application of oleogels in this process, we seek to provide insights into using oleogels as an alternative to traditional cooking oils.

Scope

Deep-frying, a widely used cooking method, leads to the retention of large amounts of oil in fried food, which has been associated with health concerns. To address this issue, researchers have investigated various methods to minimize oil absorption during frying. One promising approach is the use of oleogels, which are thermo-reversible, three-dimensional gel networks formed by entrapment of bulk oil with a low concentration (<10% of weight) of solid lipid materials known as oleogelators. This review will focus on the following aspects: a) an overview of deep-fried foods, b) factors influencing oil uptake and underlying mechanisms for oil absorption during deep-frying, c) the characterization and application of different frying oils and their oleogels in deep-fried foods, d) components of the oleogel system for deep-frying, and e) the health impact, oxidative stability, and sensory acceptability of using oleogels in deep-frying.

Key findings

The review highlights the potential of oleogels as a promising alternative frying medium to reduce fat absorption in deep-fried foods. Considering the factors influencing oil uptake during deep-frying, as well as exploring the properties and applications of different frying oils and their oleogels, can result in improved product qualities and heightened consumer acceptance. Moreover, oleogels offer the advantage of lower fat content in fried products, addressing health concerns associated with traditional deep-frying methods. The capacity to enhance the nutritional and energy profile of foods while preserving sensory qualities and oxidative stability positions oleogels as a promising choice for upcoming food processing applications.

Application of soy protein isolate-xylose conjugates for improving the viability and stability of probiotics microencapsulated by spray drying

BACKGROUND

Production and consumption of probiotics need to meet many adverse stresses, which can reduce their health-promoting effects on humans. Microencapsulation is an effective technique to improve the biological activity of probiotics and wall materials are also required during encapsulation. Application of Maillard reaction products (MRPs) in probiotic delivery is increasing.

RESULTS

This work aims to study the effects of soy protein isolate (SPI)-xylose conjugates heated at different times on the viability and stability of probiotics. SPI-xylose MRPs formed after heat treatment based on changes in the browning intensity, sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Fourier transform infrared spectroscopy. After heat treatment, α-helix and β-sheet contents of SPI-xylose mixture shifted from 11.3% and 31.3% to 6.4-11.0% and 31.0-36.9%, respectively, and the thermal stability slightly changed. During spray drying, except for MRP240@LAB, probiotic viability was higher in the MRP-based probiotic microcapsules (21.36-25.31%) than in Mix0@LAB (20.17%). MRP-based probiotic microcapsules had smaller particle sizes (431.1-1243.0 nm vs. 7165.0 nm) and greater intestinal digestion tolerance than Mix0@LAB. Moreover, the MRP-based probiotic microcapsules showed better storability than Mix0@LAB and adequate growth and metabolism capacity.

CONCLUSION

SPI-xylose Maillard reaction products are a promising wall material for probiotics microencapsulation, which can improve bacterial survivability during spray drying and enhance bacterial gastrointestinal digestion resistance. This study sheds light on preparing probiotic microcapsules with superior properties by spray drying. © 2023 Society of Chemical Industry.

A Plant-Based Animal Fat Analog Produced by an Emulsion Gel of Alginate and Pea Protein

As the market for plant-based meat analogs grows, the development of plant-based animal fat analogs has become increasingly important. In this study, we propose an approach by developing a gelled emulsion based on sodium alginate, soybean oil (SO), and pea protein isolate. Formulations containing 15% to 70% (w/w) SO were successfully produced without phase inversion. The addition of more SO resulted in pre-gelled emulsions with a more elastic behavior. After the emulsion was gelled in the presence of calcium, the color of the gelled emulsion changed to light yellow, and the formulation containing 70% SO exhibited a color most similar to actual beef fat trimming. The lightness and yellowness values were greatly influenced by the concentrations of both SO and pea protein. Microscopic images revealed that pea protein formed an interfacial film around the oil droplets, and the oil was more tightly packed at higher oil concentrations. Differential scanning calorimetry showed that lipid crystallization of the gelled SO was influenced by the confinement of the alginate gelation, but the melting behavior was like that of free SO. FTIR spectrum analysis indicated a potential interaction between alginate and pea protein, but the functional groups of SO were unchanged. Under mild heating conditions, gelled SO exhibited an oil loss similar to that observed in actual beef trims. The developed product has the potential to mimic the appearance and slow-rendering melting attribute of real animal fat.

Emulsion-Templated Liquid Oil Structuring with Egg White Protein Microgel- Xanthan Gum

In this study, oleogels were prepared by the emulsion-template method using egg-white protein microgel as a gelator and xanthan gum (XG) as thickener. The physicochemical properties of the emulsion and oleogels were investigated. The adsorption of protein on the surface of the oil droplet reached saturation when the protein microgel concentration reached 2%. The excess protein combined with XG and accumulated on the outer layer of the oleogel, which prevented the emulsion from flocculation, enhanced the oil-holding capacity of the oleogel, and had a positive effect on preventing the oxidation of oil. When the concentration of XG was less than 0.4%, the EWP microgel, combined with the XG, stabilized the emulsion. As the concentration of XG was greater than 0.4%, excessive XG in the emulsion improved the viscosity and mechanical properties of the emulsion to prevent the aggregation of oil droplets. However, the change in XG concentration had no significant effect on the oxidation of the oil.