Effects of microwave power and hot air temperature on the physicochemical properties of dried ginger (Zingiber officinale) using microwave hot-air rolling drying

Changes in flavor profile of vegetable seasonings by innovative drying technologies: A review

Seasonings like garlic, ginger, and scallion provide spicy and masking flavor or aroma in vegetables. However, the method or technique used for drying these spices can affect the flavor profile. Therefore, this review focuses on vegetable seasonings like ginger, garlic, and scallion, the characteristic flavor of fresh and dehydrated vegetable seasoning, and how drying methods (freeze-drying [FD], convective hot air drying [HAD], infrared drying, microwave drying [MW]), and other recent dryers (swirling fluidized bed [SFB], pulsed-vacuum dryer, relative humidity-convective dryer, etc.) affect the flavor profile of the common vegetable seasonings. HAD increases α-zingiberene, reduces gingerol, and forms β-citral and citral in fresh ginger. FD increased sesquiterpenes, retained terpenoids, sulfides, and other volatiles in fresh ginger, and did not produce new volatile compounds (VOCs) in garlic. SFB drying better preserves 6-gingerol than FD and HAD. MW increases trisulfides and cyclic sulfur compounds in garlic. In general, drying, especially thermal drying reduces the VOCs in fresh garlic, ginger, and scallion and causes the formation of new VOCs.

Optimization of Processing Parameters for Continuous Microwave Drying of Crab Apple Slices via Response Surface Methodology

To improve product quality and obtain suitable processing parameters for crab apple slices (CASs) produced by continuous microwave drying (CMD), the effects of processing parameters, including slice thickness, microwave power, air velocity, and conveyor belt speed, on the evaluation indexes in terms of temperature, moisture content, color (L*, a*, b*), hardness, brittleness, and total phenolic content of CASs were investigated via the response surface method. The results indicated that microwave power has the greatest effect on the evaluation indexes applied to the CASs under CMD, followed by air velocity, slice thickness, and conveyor belt speed. To produce the desired product quality, the appropriate parameters for CMD of CASs were optimized as 1.25 mm slice thickness, 14,630 W microwave power, 0.50 m·s-1 air velocity, and 0.33 m·min-1 conveyor belt speed. Following that, the moisture content under CMD was found to be 13.53%, the desired color, hardness 0.79 g, brittleness 12.97 (number of peaks), and the total phenolic content 5.48 mg·g-1. This research provides a theoretical framework for optimizing the processing parameters of CASs using the response surface method.

Characterization of the Aroma Profile of Ginger Powder Produced by a Split-Stream Spray-Drying Process

Freeze-dried ginger (Zingiber officinale) is renowned for its high quality, but it is expensive. As an alternative, spray drying can be explored for producing ginger powder. However, sugar rich feed solutions can lead to stickiness development during the process. Adding carrier materials increases costs and labeling. Accordingly, a split-stream spray-drying process was developed, where ginger fibers in their natural composition were reintroduced as a carrier material into the spray-drying process. The inlet and outlet temperatures were set at 220 and 80 °C, respectively, for optimal aroma retention. Using a stir bar sorptive extraction-gas chromatography-mass spectrometry-olfactometry, the results revealed that reintegrating ginger fibers significantly increased the concentration of eight key odorants. Although freeze-dried ginger retains more aroma, the total concentration of twenty-seven odorants in the developed spray-dried ginger was 1.9 times higher compared to frozen ginger.

Enhanced Quick-Cooking Red Beans: An Energy-Efficient Drying Method with Hot Air and Stepwise Microwave Techniques

This research introduced an energy-efficient drying method combining hot-air drying with stepwise microwave heating for producing quick-cooking red beans. Crucial parameters such as the effective diffusivity coefficient (De), and specific energy consumption (SEC) were examined across varying conditions with the aim of optimizing the drying condition. The results showed that De and SEC varied in a range of 0.53 × 10-9-3.18 × 10-9 m2·s-1 and 16.58-68.06 MJ·(kg·h-1)-1, respectively. The findings from the response surface methodology indicated that optimal drying conditions for cooked red beans are achieved at a hot air temperature of 90 °C, a microwave power of 450 W (corresponding to an initial intensity of 2.25 W·g-1), and a rotational speed of 0.2 Hz. These conditions lead to the maximum effective diffusivity coefficient and the lowest specific energy consumption. Further investigations into step-up (150-300 W to 300-450 W) and step-down (300-450 W to 150-300 W) microwave heating modes were conducted to refine the drying process for enhanced energy efficiency. The synthetic evaluation index revealed that step-down microwave heating strategies of 450 W-to-150 W and 300 W-to-150 W, applied at a temperature of 90 °C and a rotational speed of 0.2 Hz, were notably effective. These methods successfully minimized energy use while preserving the quality attributes of the final product, which were comparable to those of traditionally cooked and freeze-dried red beans. The combined approach of hot-air drying with step-down microwave heating presents a promising, energy-saving technique for producing quick-cooking beans that retain their rehydration qualities and texture.

Vacuum-steam pulsed blanching: An emerging method to enhance texture softening, drying behavior and physicochemical properties of Cornus officinalis

Vacuum steam pulsed blanching (VSPB) was employed as a novel blanching technology on Cornus officinalis to soften the tissue for subsequent coring and dehydration. The current work aims to explore its effect on mass transfer behavior, PPO inactivation, drying characteristics, physicochemical properties, antioxidant capacity, and microstructure of C. officinalis. Results showed that VSPB increased water loss, decreased solid gain, and increased weight reduction with increased blanching cycles. Besides, VSPB significantly changed physical properties and extensively reduced drying time which was attributed to the cell wall components dissolving and cell turgor pressure decreasing, also verified by observing microstructure alteration. PPO was completely denatured after blanching in 6 cycles, but phenolic compounds were still diffused or degraded. Notably, the content of flavonoids and antioxidant capacity significantly increased compared to fresh samples probably due to increased extractability caused by the disrupting cell structure. Besides, the carotenoids and ascorbic acid could be well preserved.

Optimum drying conditions for ginger (Zingiber officinale Roscoe) based on time, energy consumption and physicochemical quality

The effect of ultrasonic pre-treatment on moisture removal characteristics of ginger in a convective dryer was investigated. The slabs were dried by practicing sonication durations of 0, 15 and 30 min at different levels of the air temperature and velocity. Following increasing the sonication duration and air temperature, required time and energy to dehydrate the samples were decreased. The pre-treatment played important role in improving rehydration capability and surface color retention in the dried gingers. Content of the main volatile component (α-Zingiberene) was not influenced by the sonication. Mean values for the phenolic contents and antioxidant activity at sonication duration of 0, 15 and 30 min were determined to be 18.93, 18.15 and 17.49 GAE/g dry matter and 83.57, 78.33 and 74.58 %, respectively. The desired values for the temperature, velocity and sonication duration were revealed to be about 66 °C, 3 m/s and 20 min, respectively.

Ultrasound-Microwave Combined Extraction of Novel Polysaccharide Fractions from Lycium barbarum Leaves and Their In Vitro Hypoglycemic and Antioxidant Activities

Ultrasound-microwave combined extraction (UMCE), gradient ethanol precipitation, chemical characterization, and antioxidant and hypoglycemic activities of Lycium barbarum leaf polysaccharides (LLP) were systematically studied. The optimal conditions for UMCE of LLP achieved by response surface method (RSM) were as follows: microwave time of 16 min, ultrasonic time of 20 min, particle size of 100 mesh, and ratio of liquid to solid of 55:1. Three novel polysaccharide fractions (LLP₃₀, LLP₅₀, LLP₇₀) with different molecular weights were obtained by gradient ethanol precipitation. Polysaccharide samples exhibited scavenging capacities against ABTS and DPPH radicals and inhibitory activities against α-glucosidase and α-amylase. Among the three fractions, LLP₃₀ possessed relatively high antioxidant and hypoglycemic activities in vitro, which showed a potential for becoming a nutraceutical or a phytopharmaceutical for prevention and treatment of hyperglycemia or diabetes.