Influence of different anionic polysaccharide coating on the properties and delivery performance of nanoliposomes for quercetin

Zein/fucoidan-coated phytol nanoliposome: preparation, characterization, physicochemical stability, in vitro release, and antioxidant activity

BACKGROUND

To improve phytol bioavailability, a novel method of magnetic stirring and high-pressure homogenization (HPH) combination was used to prepare zein/fucoidan-coated phytol nanoliposomes (P-NL-ZF). The characterization, the simulated in vitro digestion, and the antioxidant activity of these phytol nanoliposomes from the different processes have been studied.

RESULTS

Based on the results of dynamic light scattering (DLS) and gas chromatography-mass spectrometer (GC-MS) analysis, P-NL-ZF prepared through the combination of magnetic stirring and HPH exhibited superior encapsulation efficiency at 76.19% and demonstrated exceptional physicochemical stability under a series of conditions, including storage, pH, and ionic in comparison to single method. It was further confirmed that P-NL-ZF by magnetic stirring and HPH displayed a uniform distribution and regular shape through transmission electron microscopy (TEM). Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) analysis showed that electrostatic interactions and hydrogen bonding were the primary driving forces for the formation of composite nanoliposomes. Additionally, an in vitro digestion study revealed that multilayer composite nanoliposomes displayed significant and favorable slow-release properties (58.21%) under gastrointestinal conditions compared with traditional nanoliposomes (82.36%) and free phytol (89.73%). The assessments of chemical and cell-based antioxidant activities demonstrated that the coating of zein/fucoidan on phytol nanoliposomes resulted in enhanced effectiveness in scavenging activity of ABTS free radical and hydroxyl radical and mitigating oxidative damage to HepG2 cells.

CONCLUSION

Based on our studies, the promising delivery carrier of zein/fucoidan-coated nanoliposomes is contributed to the encapsulation of hydrophobic natural products and enhancement of their biological activity. © 2024 Society of Chemical Industry.

Thermal stability, antioxidant activity and bioavailability of pea protein-naringin Pickering emulsion for enhanced delivery applications

After successfully addressing to mitigate bitterness of naringin through construction Pickering emulsion using pea protein (PP) and naringin (NG) in our previous study, we now probed thermal stability, antioxidant efficacy, and bioavailability. FTIR analysis and UV-vis spectroscopy indicated predominant interactions between PP and NG were hydrogen and hydrophobic bonds. TGA and DSC analyses demonstrated that PP-NG complexes exhibited superior heat-resistance compared to pure PP and NG. Thermal stability assessments indicated a significant retention of NG in the PP-NG Pickering emulsion than the control NG across varied temperatures (4 °C, 25 °C, 37 °C, and 65 °C). Moreover, the antioxidant activity of PP-NG emulsion was dependent on the concentration of NG, as evidenced by DPPH and ABTS free radicals scavenging abilities, ferric reducing power, and lipid peroxidation resistance. Additionally, PP-NG Pickering emulsion exhibited substantially high bioavailability (92.01 ± 3.91%). These results suggest a promising avenue for the application of NG with improved characteristics.

Polysaccharide-Based Micro/Nanomotors for Active Ingredient Delivery in Food

Micro/nanomotors (MNMs) are miniature devices that can generate energy through chemical reactions or physical processes, utilizing this energy for movement. By virtue of their small size, self-propulsion, precise positioning within a small range, and ability to access microenvironments, MNMs have been applied in various fields including sensing, biomedical applications, and pollutant adsorption. However, the development of food-grade MNMs and their application in food delivery systems have been scarcely reported. Currently, there are various issues with the decomposition, oxidation, or inability to maintain the activity of some nutrients or bioactive substances, such as the limited application of curcumin (Cur) in food. Compared to traditional delivery systems, MNMs can adjust the transport speed and direction as needed, effectively protecting bioactive substances during delivery and achieving efficient transportation. Therefore, this study utilizes polysaccharides as the substrate, employing a simple, rapid, and pollution-free template method to prepare polysaccharide-based microtubes (PMTs) and polysaccharide-based micro/nanomotors (PMNMs). PMNMs can achieve multifunctional propulsion by modifying ferrosoferric oxide (Fe3O4), platinum (Pt), and glucose oxidase (GOx). Fe-PMNMs and Pt-PMNMs exhibit excellent photothermal conversion performance, showing promise for applications in photothermal therapy. Moreover, PMNMs can effectively deliver curcumin, achieving the effective delivery of nutrients and exerting the anti-inflammatory performance of the system.

Liposomes in the cosmetics: present and outlook

Liposomes are small spherical vesicles composed of phospholipid bilayers capable of encapsulating a variety of ingredients, including water- and oil-soluble compound, which are one of the most commonly used piggybacking and delivery techniques for many active ingredients and different compounds in biology, medicine and cosmetics. With the increasing number of active cosmetic ingredients, the concomitant challenge is to effectively protect, transport, and utilize these substances in a judicious manner. Many cosmetic ingredients are ineffective both topically and systemically when applied to the skin, thus changing the method of delivery and interaction with the skin of the active ingredients is a crucial step toward improving their effectiveness. Liposomes can improve the delivery of active ingredients to the skin, enhance their stability, and ultimately, improve the efficacy of cosmetics and and pharmaceuticals. In this review, we summarized the basic properties of liposomes and their recent advances of functionalities in cosmetics and and pharmaceuticals. Also, the current state of the art in the field is discussed and the prospects for future research areas are highlighted. We hope that this review will provide ideas and inspiration on the application and development of cosmetics and pharmaceuticals.

Techniques, applications and prospects of polysaccharide and protein based biopolymer coatings: A review

The growing relevance of sustainable materials has recently led to the exploration of naturally derived biopolymeric hydrogels as coating materials due to their biodegradability, biocompatibility, ease of fabrication and modification. Although many review articles exist on biopolymeric coatings, they mainly focus on a specific polysaccharide, protein biopolymer, or a particular application- biomedical engineering or food preservation. The current review first summarizes the commonly used polysaccharide and protein-based biopolymers like chitosan, alginate, carrageenan, pectin, cellulose, starch, pullulan, agarose and silk fibroin, gelatin, respectively, with a systematic description of the techniques widely used for physical coating on substrates. Then, broad applications of these biopolymeric coatings on various substrates in biomedical engineering- 3D scaffolds, biomedical implants, and nanoparticles are described in detail. It also entails the application of biopolymeric coatings for food preservation in the form of food packaging and edible coatings. A brief discussion on the newly discovered interest in exploring biopolymers for anticorrosive coating applications is also included. Finally, concluding remarks on the role of biopolymer microstructures in forming homogeneous coatings, prospective alternatives to the currently used biopolymers as coating material and the advent of computer-aided technologies to expedite experimental findings are presented.

Polysaccharide-coated quercetin-loaded nanoliposomes mitigate bitterness: A comparison of carrageenan, pectin, and trehalose

The intense bitterness of quercetin poses a challenge to its utilization in the food industry. To address this issue, three anionic polysaccharides (carrageenan, pectin, and trehalose) were individually incorporated to fabricate polysaccharide-coated liposome nanocarriers. Electronic tongue analysis revealed a significant decreasing bitterness value (10.34 ± 0.07 mV, sensory score 1.8 ± 0.2, taste weak bitter) in quercetin-loaded nanoliposomes, compared with the bitterness value of quercetin aqueous solution (14 ± 0.01 mV, sensory score 7.3 ± 0.3, taste strong bitter). Furthermore, the polysaccharide-coated nanoliposomes exhibited an even greater capacity to mask the bitterness of quercetin, with carrageenan coated nanoliposomes demonstrating the most pronounced effect. The superior bitter masking ability of carrageenan coated nanoliposomes can be attributed to its high charge and viscosity. In sensory evaluations, gummy incorporated with carrageenan-coated nanoliposomes received the highest ratings, exhibiting enhanced overall palatability and antioxidant activity. This study offers insights into expanding the use of bitter nutrients in food applications and paves the way for more appealing and healthful food products.

Influence of Auricularia cornea Polysaccharide Coating on the Stability and Antioxidant Activity of Liposomes Ginsenoside Rh2

Liposomes (Lip) are microstructures containing lipid and aqueous phases for encapsulation and delivery of bioactivators. In this study, Ginsenoside Rh2 liposomes (Rh2-Lip) were prepared by a thin-film hydrated ultrasonic binding method. But they are not stable during storage. In addition, Rh2-Lip was wrapped with Auricultural cornea polysaccharide (ACP) and Chitosan (CS) as coating materials to improve stability. CS coating was used as a positive control. The particle sizes determined by dynamic light scattering (DLS) showed 183 ± 5.52 nm for liposomes, 197 ± 6.7 nm for Auricultural cornea polysaccharide coated liposomes (ACP-Rh2-Lip), and 198 ± 3.5 nm for Chitosan coated liposomes (CS-Rh2-Lip). The polydispersity index (PDI) of all liposomes was less than 0.3. Transmission electron microscopy (TEM) showed that ACP and CS were successfully encapsulated on the liposome surface. In vitro simulations of digestive stability in the gastrointestinal tract showed that ACP-Rh2-Lip and CS-Rh2-Lip were more stable in gastrointestinal fluids compared to Lip. The antioxidant experiment revealed that ACP-Rh2-Lip has greater antioxidant activity than Lip. The purpose of this study was to look into the effects of ACP-Rh2-Lip and to offer a reference for Ginsenoside Rh2 (Rh2) delivery.

Regulation of Nanoliposome Rigidity and Bioavailability of Oligomeric Proanthocyanidin with Phytosterols Containing Different C3 Branches

The rigidity of nanoliposomes significantly influences their physical stability and in vitro and in vivo behaviors (e.g., cellular uptake, blood circulation, biodistribution, etc.). This study aimed to quantify the rigidity of the nanoliposomes composed of phytosterol with varying C3 branches and phospholipids (DPPC, DOPC) using atomic force microscopy. Young's modulus, determined by the Shell model, effectively differentiated between mechanical differences in nanoliposomes with varying components and component structure and phase states. FTIR results indicated that P-SG exhibited the highest Young's modulus (175.98 ± 10.53 MPa) due to the hydrogen bond between the glucose residue of steryl glycosides (SGs) and the phospholipid polar head. However, the rigidity of DOPC nanoliposomes was not significantly different due to the unsaturated bond. The addition of oligomeric proanthocyanidin (OPC) did not change the order of rigidity among the nanoliposomes, with P-SG-OPC having the highest Young's modulus (126.27 ± 2.06 MPa). In the simulated gastrointestinal tract experiment, P-SG-OPC exhibited the greatest stability, with minimal particle aggregation. Cellular uptake experiments revealed that DPPC nanoliposomes with high rigidity had optimal endocytosis, while DOPC nanoliposome uptake was independent of rigidity. In melanin production inhibition tests, the inhibitory effect correlated directly with Young's modulus and P-SG-OPC had the best inhibitory effect on melanin generation. Our findings in this study provide valuable insights into the design and optimization of nanoliposomes for the efficient delivery of active substances, offering potential solutions for improving the efficacy of drug delivery systems.

Mechanical and Surface Properties of Edible Coatings Elaborated with Nanoliposomes Encapsulating Grape Seed Tannins and Polysaccharides

Edible composite coatings (ECC) formulated from biopolymers that incorporate antioxidant molecules represent an innovative alternative to improve food texture and provide health benefits. Tannins have aroused great interest due to their ability to stabilize suspensions and counteract the effects of free radicals. The mechanical and surface properties are crucial to establishing its quality and applicability. In this study, the objective was to analyze the mechanical and surface properties of ECC made with nanoliposomes that encapsulate grape seed tannins (TLS) and polysaccharides such as hydroxypropylmethylcellulose (HPMC) and kappa carrageenan (KCG) for their future direct application in foods susceptible to oxidation. The inclusion of HPMC or KCG affected the density, showing values in the range of 1010 to 1050 [kg/m3], evidencing significant changes (p < 0.05) in the surface tension in the TLS/FS-HPMC and TLS/FS mixtures. KCG and in the dispersion coefficients, with values in the range of -2.9 to -17.6 [mN/m] in HPS (S1) and -17.6 to -40.9 [mN/m] in PDMS (S2). The TLS/FS-HPMC coating showed higher stiffness and elastic recovery capacity than the TLS/FS-KCG coating, suggesting that the presence of TLS influenced the stiffness of the polymer. HPMC is recommended as a suitable polymer for coating solids, while KCG is more appropriate for suspensions. These findings provide valuable information for directly applying these ECC compounds to food products, potentially offering better preservation and health benefits.

Impact of Biogenic and Chemogenic Selenium Nanoparticles on Model Eukaryotic Lipid Membranes

Microbial nanotechnology is an expanding research area devoted to producing biogenic metal and metalloid nanomaterials (NMs) using microorganisms. Often, biogenic NMs are explored as antimicrobial, anticancer, or antioxidant agents. Yet, most studies focus on their applications rather than the underlying mechanism of action or toxicity. Here, we evaluate the toxicity of our well-characterized biogenic selenium nanoparticles (bSeNPs) produced by the Stenotrophomonas maltophilia strain SeITE02 against the model yeast Saccharomyces cerevisiae comparing it with chemogenic SeNPs (cSeNPs). Knowing from previous studies that the biogenic extract contained bSeNPs in an organic material (OM) and supported here by Fourier transform infrared spectroscopy, we removed and incubated it with cSeNPs (cSeNPs_OM) to assess its influence on the toxicity of these formulations. Specifically, we focused on the first stages of the eukaryotic cell exposure to these samples─i.e., their interaction with the cell lipid membrane, which was mimicked by preparing vesicles from yeast polar lipid extract or phosphatidylcholine lipids. Fluidity changes derived from biogenic and chemogenic samples revealed that the bSeNP extract mediated the overall rigidification of lipid vesicles, while cSeNPs showed negligible effects. The OM and cSeNPs_OM induced similar modifications to the bSeNP extract, reiterating the need to consider the OM influence on the physical-chemical and biological properties of bSeNP extracts.

Enhancing the Stability and Bioaccessibility of Tree Peony Seed Oil Using Layer-by-Layer Self-Assembling Bilayer Emulsions

Tree peony seed oil (TPSO) is an important plant source of n-3 polyunsaturated fatty acid (α-linolenic acid, ALA > 40%) that is receiving increasing attention for its excellent antioxidant and other activities. However, it has poor stability and bioavailability. In this study, a bilayer emulsion of TPSO was successfully prepared using a layer-by-layer self-assembly technique. Among the proteins and polysaccharides examined, whey protein isolate (WPI) and sodium alginate (SA) were found to be the most suitable wall materials. The prepared bilayer emulsion contained 5% TPSO, 0.45% whey protein isolate (WPI) and 0.5% sodium alginate (SA) under selected conditions and its zeta potential, droplet size, and polydispersity index were -31 mV, 1291 nm, and 27%, respectively. The loading capacity and encapsulation efficiency for TPSO were up to 84% and 90.2%, respectively. It was noteworthy that the bilayer emulsion showed significantly enhanced oxidative stability (peroxide value, thiobarbituric acid reactive substances content) compared to the monolayer emulsion, which was accompanied by a more ordered spatial structure caused by the electrostatic interaction of the WPI with the SA. This bilayer emulsion also exhibited markedly improved environmental stability (pH, metal ion), rheological properties, and physical stability during storage. Furthermore, the bilayer emulsion was more easily digested and absorbed, and had higher fatty acid release rate and ALA bioaccessibility than TPSO alone and the physical mixtures. These results suggest that bilayer emulsion containing WPI and SA is an effective TPSO encapsulation system and has significant potential for future functional food development.

Pentacyclic triterpene-loaded emulsion stabilized by Agaricus blazei Murill polysaccharides: Factorial design and cytoprotection study

In this study, pentacyclic triterpene-loaded emulsions were stabilized by polysaccharides from Agaricus blazei Murill mushroom (PAb). The drug-excipient compatibility results by Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) showed the absence of physicochemical incompatibilities. The use of these biopolymers at 0.75 % led to obtaining emulsions with droplets smaller than 300 nm, moderate polydispersity, and ζ-potential >30 mV in modulus. The emulsions presented high encapsulation efficiency, suitable pH for topical application, and absence of macroscopic signs of instability during 45 days. Morphological analysis suggested the deposition of thin layers of PAb around the droplets. The encapsulation of pentacyclic triterpene in emulsions, stabilized by PAb, improved the cytocompatibility of this drug against PC12 and murine astrocyte cells. There was a reduction in cytotoxicity, which resulted in a lower accumulation of intracellular reactive oxygen species and maintenance of the mitochondrial transmembrane potential. Based on these results, it is estimated that PAb are promising biopolymers for the emulsions' stabilization by improving their physicochemical and biological properties.