Sensitive lateral flow immunoassay strips based on Fe3+-chelated polydopamine nanospheres for the detection of kanamycin

Sensitive detection of kanamycin based on ECL resonance energy transfer between iridium complex doped SiO2 nanospheres and Au nanoparticles decorated TiVC MXene

Herein, a novel sandwich electrochemiluminescence (ECL) aptasensor was developed based on the resonance energy transfer (RET) with iridium complex doped silicate nanoparticles (SiO2@Ir) as energy donor and gold nanoparticles modified TiVC MXene (AuNPs@TiVC) as energy acceptor. Strong anodic ECL signal of SiO2@Ir was obtained through both co-reactant pathway and annihilation pathway. Electrochemical results showed that SiO2@Ir has good electron transfer rate and large specific surface area to immobilize more aptamers. AuNPs@TiVC apparently quenched the ECL signal of SiO2@Ir due to the ECL resonance energy transfer between them. In the presence of kanamycin (KAN), a sandwich type sensor was formed with the aptamer probes as connecters between the donor and the acceptor, resulting in the decrease of ECL intensity. Under the optimal condition, KAN could be sensitively detected in the range of 0.1 pg/mL to 10 ng/mL with a low detection limit of 24.5 fg/mL. The proposed ECL system exhibited satisfactory analytical performance, which can realize the detection of various biological molecules by adopting suitable aptamer.

Decentralized food safety and authentication on cellulose paper-based analytical platform: A review

Food safety and authenticity analysis play a pivotal role in guaranteeing food quality, safeguarding public health, and upholding consumer trust. In recent years, significant social progress has presented fresh challenges in the realm of food analysis, underscoring the imperative requirement to devise innovative and expedient approaches for conducting on-site assessments. Consequently, cellulose paper-based devices (PADs) have come into the spotlight due to their characteristics of microchannels and inherent capillary action. This review summarizes the recent advances in cellulose PADs in various food products, comprising various fabrication strategies, detection methods such as mass spectrometry and multi-mode detection, sampling and processing considerations, as well as applications in screening food safety factors and assessing food authenticity developed in the past 3 years. According to the above studies, cellulose PADs face challenges such as limited sample processing, inadequate multiplexing capabilities, and the requirement for workflow integration, while emerging innovations, comprising the use of simplified sample pretreatment techniques, the integration of advanced nanomaterials, and advanced instruments such as portable mass spectrometer and the innovation of multimodal detection methods, offer potential solutions and are highlighted as promising directions. This review underscores the significant potential of cellulose PADs in facilitating decentralized, cost-effective, and simplified testing methodologies to maintain food safety standards. With the progression of interdisciplinary research, cellulose PADs are expected to become essential platforms for on-site food safety and authentication analysis, thereby significantly enhancing global food safety for consumers.

Novel litchi-like Au-Ag nanospheres driven dual-readout lateral flow immunoassay for sensitive detection of pyrimethanil

Pyrimethanil (PYR) is a fungicide that is harmful to consumers when present in foods at concentrations greater than maximum permitted residue levels. High-performance immunoprobes and dual-readout strategy may be useful for constructing sensitive lateral flow immunoassay (LFIA). Herein, the prepared litchi-like Au-Ag bimetallic nanospheres (LBNPs) exhibited high mass extinction coefficients and fluorescence quenching constants. Benefiting from LBNPs and dual-readout mode, the limits of detection of LBNPs-CM-LFIA and LBNPs-FQ-LFIA for PYR were 0.957 and 0.713 ng mL-1, which were 2.54- and 3.41-fold lower than that of gold nanoparticles-based LFIA, respectively. The limits of quantitation of LBNPs-CM-LFIA and LBNPs-FQ-LFIA were 3.740 and 1.672 ng mL-1, respectively. LBNPs-LFIA was applied to detect PYR in cucumber and grape samples with satisfactory recovery (90%-111%). LBNPs-LFIA showed good agreement with LC-MS/MS for the detection of PYR in the samples. Accordingly, this sensitive and accurate dual-readout LFIA based on LBNPs can be effectively applied for food safety.

Polyoxometalate-based nanozyme with laccase-mimicking activity for kanamycin detection based on colorimetric assay

As a kind of aminoglycoside antibiotics, kanamycin (KAN) is widely applied to animal husbandry and aquaculture. However, the abuse of KAN causes the large-scale discharge of it into rivers, lakes and groundwater, which threatens environmental safety and human health. Therefore, it is imperative to develop a method that is applicable to detect KAN in an efficient and accurate way. The colorimetric method based on enzymes provides a feasible solution for the detection of organic pollutants. However, the extensive application of natural enzymes is constrained by high cost and low stability. Herein, a polyoxometalate-based nanozyme, namely [H7SiW9V3O40(DPA)3]·4H2O (SiW9V3/DPA) (DPA = dipyridylamine), is synthesized. As a low-cost nanozyme with high stability compared to natural enzymes, SiW9V3/DPA performs well in laccase-mimicking activity. It can be used to induce chromogenic reaction between 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP), which generates red products. With the addition of KAN, the color fades. That is to say, KAN can be detected with colorimetric assay in the concentration range 0.1 to 100 μM with high selectivity and low limit of detection (LOD) of 6.28 μM. Moreover, SiW9V3/DPA is applied to KAN detection in lake and river water and milk with satisfactory results. To sum up, polyoxometalate-based nanozyme is expected to provide a promising solution to the detection of organic pollutants in the aquatic environment.

Development and application of bisphenol S electrochemical immunosensor and iridium oxide nanoparticle-based lateral flow immunoassay

Bisphenol S (BPS) is a common pollutant in the environment and has posed a potential threat to aquatic animals and human health. To accurately assess the pollution level and ecological risk of BPS, there is an urgent need to establish simple and sensitive detection methods for BPS. In this study, BPS complete antigen was successfully prepared by introducing methyl 4-bromobutyrate and coupling bovine serum albumin (BSA). The monoclonal antibody against BPS (anti-BPS mAb) with high affinity (1: 256,000) was developed based on the BPS complete antigen, which showed low cross-reactivity with BPS structural analogues. Then, an electrochemical immunosensor was constructed to detect BPS using multi-walled carbon nanotubes and gold nanoflower composites as signal amplification elements and using anti-BPS mAb as the probe. The electrochemical immunosensor had a linear range from 1 to 250 ng⋅mL-1 and a limit of detection (LOD) down to 0.6 ng⋅mL-1. Additionally, a more stable and sensitive lateral flow immunoassay (LFIA) for BPS was developed based on iridium oxide nanoparticles, with a visual detection limit of 1 ng⋅mL-1, which was 10 times lower than that of classical Au-NPs LFIA. After evaluation of their stability and specificity, the reliability of these two methods were further validated by measuring BPS concentrations in the water and fish tissues. Thus, this study provides sensitive, robust and rapid methods for the detection of BPS in the environment and organisms, which can provide a methodological reference for monitoring environmental contaminants.

UiOL@AIEgens-assisted lateral flow immunosensor for the ultrasensitive dual-modal point-of-care detection of aflatoxin B1

Aflatoxin B1 (AFB1) contamination in food has attracted worldwide attention. The sensitive detection of AFB1 is vital for ensuring food quality and safety. This study developed an ultrasensitive signal-enhanced lateral flow immunosensor (LFIS) based on the functionalized zirconium metal-organic framework (MOF) of a UiO linker enriched with abundant aggregation-induced emission luminogen (UiOL@AIEgens) probes for the rapid dual-modal point-of-care (POC) determination of AFB1. Using UiO MOFs with numerous active sites as the carrier facilitated abundant AIEgens enrichment on the surface. After coupling with enough anti-AFB1 monoclonal antibodies (mAbs), the green-emissive UiOL@AIEgens-mAbs probes with high specificity and remarkably-enhanced fluorescence responses were obtained to competitively capture target AFB1 in the standard or sample solution and AFB1 antigen immobilized on the test (T) line of the POC LFIS. Under optimum conditions, the LFIS was capable of visual qualitative and smartphone-assisted dual-modal determination of target AFB1 within 7 min. Detection occurred in a range of 0.01-5 ng/mL at an ultra-low detection limit of 0.003 ng/mL, which was 300- and 600-fold lower than traditional immunoassays and the maximum limit set by the European Union, respectively. Moreover, the feasibility and robustness of the LFIS platform were assessed by detecting AFB1 in maize and lotus seed samples with average recoveries of 94.3-109.0%. The developed UiOL@AIEgens-based POC LFIS can be used for ultrasensitive, reliable, on-site detection in food. This study provides a new method for the real-time monitoring of AFB1 and other harmful contaminants in food and more complex matrices.

High extinction coefficient material combined with multi-line lateral flow immunoassay strip for ultrasensitive detection of bacteria

Lateral flow immunoassay strips (LFIAs) are a reliable and point-of-care detection method for rapid monitoring of bacteria, but their sensitivity was limited by the low extinction coefficient of colloidal gold nanoparticles (Au NPs) and low capture efficiency of test-line. In this study, polydopamine nanoparticles (PDA NPs) were employed to replace Au NPs, due to their high extinction coefficient. And the amount of test-line was increased to 5 for further improving the efficiency of bacteria capture. Thus, under visual observation, the detection limits of PDA-based LFIAs (102 CFU/mL) were about 2 orders of magnitude lower than Au-based LFIAs (104 CFU/mL). Furthermore, the invisible signal could be collected by Image J and the detection limit can reach 10 CFU/mL. The proposed test strips were successfully applied for the quantitative, accurate, and rapid screening of E. coli in food samples. This study provided a universal approach to enhance the sensitivity of bacteria LFIAs.

High Specific and Rapid Detection of Cannabidiol by Gold Nanoparticle-Based Paper Sensor

In order to facilitate monitoring of cannabidiol (CBD), we devised a gold immunochromatographic sensor based on a specific monoclonal antibody (mAb). To prepare the antigen, a novel hapten with CBD moiety and a linear carbon chain was employed. By utilizing hybridoma technology, a specific mAb was screened and identified that exhibited a 50% maximal inhibitory concentration against CBD ranging from 28.97 to 443.97 ng/mL. Extensive optimization led to the establishment of visual limits of detection for CBD, achieving a remarkable sensitivity of 8 μg/mL in the assay buffer. To showcase the accuracy and stability, an analysis of CBD-spiked wine, sparkling water, and sports drink was conducted. The recovery rates observed were as follows: 88.4-109.2% for wine, 89.9-107.8% for sparkling water, and 83.2-95.5% for sports drink. Furthermore, the coefficient of variation remained impressively low, less than 4.38% for wine, less than 2.07% for sparkling water, and less than 6.34% for sports drink. Importantly, the developed sensor exhibited no cross-reaction with tetrahydrocannabinol (THC). In conclusion, the proposed paper sensor, employing gold nanoparticles, offers a user-friendly and efficient approach for the precise, rapid, and dependable determination of CBD in products.

Construction of Liquid Crystal-Based Sensors Using Enzyme-Linked Dual-Functional Nucleic Acid on Magnetic Beads

The development of liquid crystal (LC)-based sensors with superior performances such as high portability, excellent stability, great convenience, and remarkable sensitivity is highly demanded. This work proposes a new strategy for constructing the LC-based sensor using enzyme-linked dual-functional nucleic acid (d-FNA) on magnetic beads (MBs). The detection of kanamycin (KA) is demonstrated as a model. Acetylcholinesterase (AChE) is assembled onto the KA aptamer-modified MBs with a d-FNA strand that consists of an AChE aptamer and the complementary sequence of a KA aptamer. As the specific recognition of KA by its aptamer triggers the release of AChE from the MBs, the myristoylcholine (Myr) solution after incubation with the MBs causes the black image of the LCs due to the formation of the Myr monolayer at the aqueous/LC interface. Otherwise, in the absence of KA, AChE is still decorated on the MBs and causes the hydrolysis of Myr. Therefore, a bright image of LCs is obtained. The detection of KA is successfully achieved with a lower detection limit of 48.1 pg/mL. In addition, a thin polydimethylsiloxane (PDMS) layer-coated glass and a portable optical device are used to improve the stability and portability of the LC-based sensor to advance potential commercial applications. Furthermore, the detection of KA in milk with a portable device is demonstrated, showing the potential of the proposed enzyme-linked LC-based sensor.

A novel colorimetric assay for sensitive detection of kanamycin based on the aptamer-regulated peroxidase-mimicking activity of Co3O4 nanoparticles

Kanamycin is used widely in livestock farming due to its antimicrobial properties and low cost, but has led to antibiotic residues in food, which can damage human health. Therefore, there is an urgent need for convenient technology that can be used to detect kanamycin rapidly. We found that Co₃O₄ nanoparticles (NPs) possessed peroxidase-like activity that catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine to change color. Interestingly, a target-specific aptamer could regulate the catalytic activity of Co₃O₄ NPs and inhibit this effect through aptamer-target binding. On the basis of a colorimetric assay combined with an aptamer-regulatory mechanism, the linear range for quantitative detection of kanamycin was 0.1-30 μM, the minimum limit of detection was 44.2 nM, and the total time needed for detection was 55 min. Moreover, this "aptasensor" displayed excellent selectivity and could be applied to detect KAN in milk samples. Our sensor might have promising applications for kanamycin detection in animal husbandry and agricultural products.