A novel global hydrodynamic analysis of the molecular flexibility of the dietary fibre polysaccharide konjac glucomannan

Study on properties and simulation application scenarios of flame retarded modified konjac glucomannan organic and inorganic composite aerogel

In this paper, a new organic-inorganic biomass composite aerogel was prepared by freeze-drying method with glucomannan, hydrophilic isocyanate, water-soluble flame retardant, and water glass as raw materials. Biomass Konjac glucose mannan (KGM) was used as the main network framework, KGM was chemically cross-linked and alkali-cross-linked with hydrophilic isocyanate and Na2SiO3 solution, and flame retardant modified with water-soluble flame retardant and water glass. The microstructure showed an obvious organic-inorganic interpenetrating network structure. The compressive strength of sample K2S4P2 was 4.751 ± 0.089 MPa, and the compression modulus of sample K2S4P1B modified by boric acid hydrolysis of Na2SiO3 was 63.76 ± 1.81 × 103 m2/s2. The introduction of boron ions contributes to the thermal stability of organic components. The peak and total heat release rates of sample K2S4P1A4 decreased by 80.3 % and 50.8 %, respectively. In addition, the thermal simulation calculation of the external wall in winter and summer using ANSYS software showed that the thickness of the insulation layer with the best insulation effect is 40-60 mm. The organic-inorganic composite aerogel provides a simple and environmentally friendly method for the application of external wall insulation systems in low-energy buildings with both mechanical properties and flame retardant properties.

Effect of konjac oligo-glucomannan on emulsifying properties of myofibrillar protein

BACKGROUND

The high viscosity of konjac glumannan (KGM) limits its application in meat processing. In this work, the effects of konjac oligo-glucomannan (KOG), as a derivative of KGM, on the emulsifying properties of myofibrillar protein (MP) and the related mechanism were investigated.

RESULTS

It was found that the addition of KOG had no significant effect on the secondary structure of MP, but altered the tertiary conformation of MP, resulting in exposure of tyrosine residues to polar microenvironments and decreased intrinsic fluorescence intensity. In addition, the addition of KOG increased the emulsifying activity of MP, resulting in decreased particle size and improved physical stability of the emulsion. The emulsifying activity of MP reached the maximum value when 1.0 wt% KOG was added. Moreover, the interfacial tension and interfacially adsorbed protein content of MP/KOG emulsions decreased with the increase in KOG concentration.

CONCLUSION

These findings demonstrated that KOG mainly interacted with MP and changed the amphipathy of the KOG-MP at the oil-water interface, forming a stable interface film to improve the emulsifying properties of MP. © 2023 Society of Chemical Industry.

Effect of konjac glucomannan on aggregation patterns and structure of wheat gluten with different strengths

Konjac glucomannan (KGM) can act as a food additive to improve the quality of dough. The effects of KGM on the aggregation patterns and structural properties of weak, middle, and strong gluten were studied. We found that with a higher proportion of KGM substitution (10%), the aggregation energy of middle and strong gluten became lower than the control samples, while exceeding the control for weak gluten. With 10% KGM, aggregation of glutenin macropolymer (GMP) was enhanced for weak gluten, but suppressed for middle and strong gluten. The α-helix transferred to β-sheet in weak, but caused more random-coil structures for middle and strong gluten induced by 10% KGM. With 10% KGM, the network for weak gluten became more continuous, but severely disrupted for middle and strong gluten. Thus, KGM has distinct effects on weak, middle, and strong gluten, which related to the alteration of gluten secondary structures and GMP aggregation pattern.

Study on the impact of temperature, salts, sugars and pH on dilute solution properties of Lepidium perfoliatum seed gum

The functional properties of food gums are remarkably affected by the quality of solvent/cosolutes and temperature in a food system. In this work, for the first time, the chemical characterizations and dilute solution properties of Lepidium perfoliatum seed gum (LPSG), as an emerging carbohydrate polymer, were investigated. It was found that xylose (14.27%), galacturonic acid (10.70%), arabinose (9.07%) and galactose (8.80%) were the main monosaccharaide components in the LPSG samples. The uronic acid content of LPSG samples was obtained to be 14.83%. The average molecular weight and polydispersity index of LPSG were to be 2.34 × 105 g/mol and 3.3, respectively. As the temperature was increased and the pH was decreased and the concentration of cosolutes (Na+, Ca2+, sucrose and lactose) presented in the LPSG solutions was enhanced, the intrinsic viscosity [η] and coil dimension (R coil , V coil , υ s ) of LPSG molecular chains decreased. Activation energy and chain flexibility of LPSG were estimated to be 0.46 × 107 J/kg.mol and 553.08 K, respectively. The relative stiffness parameter (B) of LPSG in the presence of Ca2+ (0.079) was more than that of Na+ (0.032). Incorporation of LPSG into deionized water (0.2%, w/v) diminished the surface activity from 76.75 mN/m to 75.70 mN/m. Zeta potential (ζ) values (-46.85 mV--19.63 mV) demonstrated that dilute solutions of LPSG had strong anionic nature in the pH range of 3-11. The molecular conformation of LPSG was random coil in all the selected solution conditions. It can be concluded that temperature and presence of cosolutes can significantly influence on the LPSG properties in the dilute systems.

The impact of konjac glucomannan on the physical and chemical stability of walnut oil-in-water emulsions coated by whey proteins

BACKGROUND

Walnut oil, which is rich in polyunsaturated fatty acids (PUFAs), can be incorporated into food emulsions to increase their nutritional value. However, these emulsions are highly susceptible to deterioration during storage due to lipid oxidation. Konjac glucomannan (KGM) is a neutral plant polysaccharide used as a stabilizer, thickener or gelling agent in foods. The goal of this study was to incorporate KGM into oil-in-water emulsions containing walnut oil droplets coated by whey protein isolate (WPI) and then determine its effects on their physical and oxidative stability.

RESULTS

At pH 3, inclusion of KGM (0.1-1 g kg^-1 ) reduced the positive surface potential on the droplets in the emulsions and modified the secondary structure of the adsorbed whey proteins, suggesting an interaction between KGM and WPI at the droplet surfaces. The physical stability of the emulsions was enhanced when 0.1-0.6 g kg^-1 KGM was added but reduced at higher levels. Lipid oxidation was inhibited in the emulsions in a dose-dependent manner when 0.2-0.6 g kg^-1 KGM was added but protein oxidation was promoted at higher KGM levels. The steric hindrance provided by the thick WPI-KGM interfaces, as well as the ability of the polysaccharides to modify the antioxidant properties of the adsorbed proteins, may account for these effects.

CONCLUSION

These results suggest that KGM can be used to inhibit lipid oxidation in emulsified foods containing protein-coated oil droplets. However, its level must be optimized because higher doses can result in droplet aggregation and protein oxidation. © 2022 Society of Chemical Industry.

Structural Elucidation, Modification, and Structure-Activity Relationship of Polysaccharides in Chinese Herbs: A Review

Chinese herbal polysaccharides (CHPs) are natural polymers composed of monosaccharides, which are widely found in Chinese herbs and work as one of the important active ingredients. Its biological activity is attributed to its complex chemical structure with diverse spatial conformations. However, the structural elucidation is the foundation but a bottleneck problem because the majority of CHPs are heteropolysaccharides with more complex structures. Similarly, the studies on the relationship between structure and function of CHPs are even more scarce. Therefore, this review summarizes the structure-activity relationship of CHPs. Meanwhile, we reviewed the structural elucidation strategies and some new progress especially in the advanced structural analysis methods. The characteristics and applicable scopes of various methods are compared to provide reference for selecting the most efficient method and developing new hyphenated techniques. Additionally, the principle structural modification methods of CHPs and their effects on activity are summarized. The shortcomings, potential breakthroughs, and developing directions of the study of CHPs are discussed. We hope to provide a reference for further research and promote the application of CHPs.

Konjac Glucomannan (KGM), Deacetylated KGM (Da-KGM), and Degraded KGM Derivatives: A Special Focus on Colloidal Nutrition

Konjac flour, mainly obtained and purified from the tubers ofAmorphophallus konjac C. Koch, yields a high molecular weight (M_w) and viscous hydrocolloidal polysaccharide: konjac glucomannan (KGM). KGM has been widely applied in the food industry as a thickening and gelation agent as a result of its unique colloidal properties of effective viscosity enhancement and thermal-irreversible gelling. This review first narrates the typical commercial KGM source species, the industrial production, and the purification process of KGM flour. The structural information on native KGM, gelation mechanisms of alkali-induced deacetylated KGM (Da-KGM) hydrogel, progress on degraded KGM derivatives, cryoprotection effect, and colloidal nutrition are highlighted. Finally, the regulatory requirements of konjac flour and KGM among different countries are briefly introduced. The fine structure and physicochemical properties of KGM can be regulated in a great range via the deacetylation or degradation reaction. Here, the relationship between the physicochemical properties, such as viscosity, solubility, gelation, and nutritional effects, of native KGM, Da-KGM, and degraded KGM derivatives was preliminary established, which would provide theoretical guidance for designing KGM-based products with certain nutritional needs.

Konjac Oligosaccharides Modulate the Gut Environment and Promote Bone Health in Calcium-Deficient Mice

This study aimed to investigate the beneficial effect of konjac oligosaccharides (KOS) on bone health in calcium-deficient mice. During the experimental period, low-calcium diet-fed mice were administered with calcium chloride to simulate daily calcium supplementation. Meanwhile, different levels of KOS intervened by adding them into the diet. After 8 weeks, the calcium balance status, bone mass parameters, and gut environment modulation were evaluated. The results showed that dietary KOS intervention alleviated the negative calcium balance, significantly promoted the trabecular number and cortical thickness, and remarkably enhanced the skeletal mechanical strength. Moreover, Pearson's correlation analysis among significantly changed gut microbiota, gut metabolites, and relevant physiological indexes showed that the microbial genera of Lactobacillus, Bifidobacterium, Mucispirillum, Alistipes, and unidentified Clostridia and gut metabolites of kynurenine and testosterone were significantly associated with increased bone mass. These findings provided a new insight into the effect of prebiotics on bone health.

Prunus armeniaca gum exudates: An overview on purification, structure, physicochemical properties, and applications

Prunus armeniaca gum exudate (PAGE) is obtained from the trunk branches of apricot trees. PAGE is a high-molecular-weight polysaccharide with arabinogalactan structure. The physicochemical and rheological characteristics of this gum have been investigated in various researches. PAGE offers a good potential for use as an emulsifying, binding, and stabilizing agent in food and pharmaceutical industries. It also can be used as an organic additive in tissue culture media, synthesizing of metallic nanoparticles, binding potential in tablets, antioxidant agent, and corrosion inhibitor. For desirable emulsifying, stabilizing, shelf life-enhancing properties, and antioxidant activity of PAGE, it can be used as additive in many foods. We present here a comprehensive review on the existing literatures on characterization of this source of polysaccharide to explore its potential applications in various systems.

Molecular engineering of thixotropic, sprayable fluids with yield stress using associating polysaccharides

HYPOTHESIS

Molecular engineering facilitates the development of a complex fluid with contradictory requirements of yield stress and sprayability, while minimizing the amount of structuring material (<0.05 wt%). This unique system can be achieved by a biopolymer hydrogel with tunable inter- and intra-molecular interactions for microstructural robustness and molecular extensibility by the variation of chemical conformations that microstructure breaks up under shear followed by a low molecularly extensible response.

EXPERIMENTS

Blends of xanthan and konjac glucomannan containing 99.95 wt% water are demonstrated to satisfy these contradictory requirements and formulated as a function of KCl concentrations. A systematic study was performed using shear and extensional rheology and compared to a reference solution of polyethylene oxide (PEO), a well-known, Boger fluid, highlights the role of molecular elasticity in controlling critical rheological properties. Static light scattering (SLS) and simultaneous rheology and small-angle neutron scattering (RheoSANS) are also used to elucidate the equilibrium structure and flow dynamics.

FINDINGS

The blends exhibit a lower yield stress and extensional resistance with added KCl, which leads to good spray characteristics in contrast to strain-hardening PEO. The results suggest that the inter-molecular attractions between the two gums leading to network formation with appropriate stiffness, that break up readily under shear, and low molecular elasticity are critical molecular design parameters necessary to achieve sprayable, yields stress fluids.

Hypoglycemic and antioxidant properties of konjac (Amorphophallus konjac) in vitro and in vivo

The aim of this study was to evaluate the hypoglycemic and antioxidant potential of konjac in vitro and in vivo. Glucose diffusion and enzymatic starch digestion of konjac were assayed using α-amylase and α-glucosidase. Oral glucose tolerance test (OGTT) and oral starch tolerance test (OSTT) were performed at dose of 102 mg/Kg of body weight (equivalent to 1 g/meal in humans). Additionally, the antioxidant activity of konjac was evaluated through inhibition of lipid peroxidation. The konjac decreased glucose diffusion by 36% and 19% compared with the negative and positive controls, respectively. Additionally, konjac inhibited α-amylase and α-glucosidase activities by 14% and 90%, respectively. After OSTT, group treated with konjac showed significant lower glucose levels compared with control group (p = .03). Finally, konjac reduced lipid peroxidation in human plasma (93%) compared with the negative control. Our results suggest that konjac exhibits hypoglycemic and antioxidant activities in vitro and in vivo. PRACTICAL APPLICATIONS: Because the use of herbal products have emerged as an attractive therapeutic option for chronic diseases, konjac administration may be an adjuvant for the treatment of type 2 diabetes.

Isolation and Biophysical Characterisation of Bioactive Polysaccharides from Cucurbita Moschata (Butternut Squash)

Cucurbits are plants that have been used frequently as functional foods. This study includes the extraction, isolation, and characterisation of the mesocarp polysaccharide of Cucurbita moschata. The polysaccharide component was purified by gel filtration into three fractions (NJBTF1, NJBTF2, and NJBTF3) of different molecular weights. Characterisation includes the hydrodynamic properties, identification of monosaccharide composition, and bioactivity. Sedimentation velocity also indicated the presence of small amounts of additional discrete higher molecular weight components even after fractionation. Sedimentation equilibrium revealed respective weight average molecular weights of 90, 31, and 19 kDa, with the higher fractions (NJBTF1 and NJBTF2) indicating a tendency to self-associate. Based on the limited amount of data (combinations of 3 sets of viscosity and sedimentation data corresponding to the 3 fractions), HYDFIT indicates an extended, semi-flexible coil conformation. Of all the fractions obtained, NJBTF1 showed the highest bioactivity. All fractions contained galacturonic acid and variable amounts of neutral sugars. To probe further, the extent of glycosidic linkages in NJBTF1 was estimated using gas chromatography–mass spectrometry (GCMS), yielding a high galacturonic acid content (for pectin polysaccharide) and the presence of fructans—the first evidence of fructans (levan) in the mesocarp. Our understanding of the size and structural flexibility together with the high bioactivity suggests that the polysaccharide obtained from C. moschata has the potential to be developed into a therapeutic agent.

Recent Advances in Chain Conformation and Bioactivities of Triple-Helix Polysaccharides

Natural polysaccharides derived from renewable biomass sources are regarded as environmentally friendly and sustainable polymers. As the third most abundant biomacromolecule in nature, after proteins and nucleic acids, polysaccharides are also closely related with many different life activities. In particular, β-glucans are one of the most widely reported bioactive polysaccharides and are usually considered as biological response modifiers. Among them, β-glucans with triple-helix conformation have been the hottest and most well-researched polysaccharides at present, especially lentinan and schizophyllan, which are clinically used as cancer therapies in some Asian countries. Thus, creation of these active triple-helix polysaccharides is beneficial to the research and development of sustainable "green" biopolymers in the fields of food and life sciences. Therefore, full fundamental research of triple-helix polysaccharides is essential to discover more applications for polysaccharides. In this Review, the recent research progress of chain conformations, bioactivities, and structure-function relationships of triple-helix β-glucans is summarized. The main contents include the characterization methods of the macromolecular conformation, proof of triple helices, bioactivities, and structure-function relationships. We believe that the governments, enterprises, universities, and institutes dealing with the survival and health of human beings can expect the development of natural bioproducts in the future. Hence, a deep understanding of β-glucans with triple-helix chain conformation is necessary for application of natural medicines and biologics for a sustainable world.

Xanthan Gum-Konjac Glucomannan Blend Hydrogel for Wound Healing

Hydrogels are considered to be the most ideal materials for the production of wound dressings since they display a three-dimensional structure that mimics the native extracellular matrix of skin as well as a high-water content, which confers a moist environment at the wound site. Until now, different polymers have been used, alone or blended, for the production of hydrogels aimed for this biomedical application. From the best of our knowledge, the application of a xanthan gum-konjac glucomannan blend has not been used for the production of wound dressings. Herein, a thermo-reversible hydrogel composed of xanthan gum-konjac glucomannan (at different concentrations (1% and 2% w/v) and ratios (50/50 and 60/40)) was produced and characterized. The obtained data emphasize the excellent physicochemical and biological properties of the produced hydrogels, which are suitable for their future application as wound dressings.

Ultrasonic Degradation of Konjac Glucomannan and the Effect of Freezing Combined with Alkali Treatment on Their Rheological Profiles

The effect of freezing combined with alkali treatment on physicochemical property of konjac glucomannan (KGM) with different molecular weight was investigated in this work. The properties and structure of degraded KGM was characterized by means of intrinsic viscosity measurement, atomic force microscope (AFM) and Fourier transformation infrared (FT-IR). The results suggested that the intrinsic viscosity of KGM solution gradually decreased during the ultrasonic treatment. The AFM observation indicated that KGM with lower viscosity average molecular weight had smaller height and lateral diameter of molecules. The main repeating units of the KGM chain could not be destroyed no matter how long the KGM was sonicated. Rheometrical studies revealed that with increasing alkali concentration from 0% to 0.36%, both viscosities and shear stress of deacetylated konjac glucomannan (Da-KGM) system were increased and moduli G' were substantially higher in either freezing or unfreezing samples. Da-KGM system performed a solid-like behavior (G' > G'') along the frequency range after freezing treatment. With increasing sonication time, both viscosity and shear stress of unfreezing samples were decreased while had an inverse effect for freezing treated samples. The modulus G' and G'' declined for unfreezing samples but rise significantly for freezing treated samples with increase of sonication time.

Effects of Ultrasonication on the Conformational, Microstructural, and Antioxidant Properties of Konjac Glucomannan

This study aims to evaluate the effects of ultrasonication (US) on the conformational, microstructural, and antioxidant properties of konjac glucomannan (KGM). US treatment with a 20-kHz and 750-W ultrasonic processor at 60% amplitude was applied for partial degradation of KGM with an average molecular weight (MW) of 823.4 kDa. Results indicated that the US treatment caused dramatic reduction in the MW, apparent viscosity, hydrodynamic radius, and z-average mean radius of gyration. The flexibility of chain conformation of native KGM was slightly increased during the US treatment. According to electronic microscopic imaging, the compact, smooth, and orderly fibrous strings formed by KGM were changed to amorphous, porous flakes and globular particles after US treatment. KGM and its US-treated fractions showed moderate radical-scavenging and ferric-reducing antioxidant activity. US degradation of KGM affected these activities either positively or negatively, depending on the US treatment period. In summary, ultrasonic degradation of KGM caused changes in its conformation characteristics, microstructure, and antioxidant activities.

Effects of dough mixing time before adding konjac glucomannan on the quality of noodles

In this study, effects of 5% konjac glucomannan (KGM) blended with low-protein flour at different dough mixing duration on the properties of dough and noodles were investigated. To prepare the KGM noodle samples, 5% KGM was added after low-protein flour mixed with water for 0, 2 and 4 min, respectively. The three samples above were defined as T₀ KGM, T₂ KGM and T₄ KGM noodle samples, respectively. The results revealed that the elastic modulus (G') and viscous modulus (G″) of dough both increased with extending dough mixing time before adding KGM. T₄ KGM samples showed the least cooking loss. Textural properties including hardness, cohesiveness and tensile strength of KGM noodles had a tendency to increase with a longer dough mixing time before adding KGM. Microstructure of dough and noodles confirmed that a longer dough mixing time before adding KGM made microstructure more compact with a thickened gluten matrix. The sensory quality of the T₂ KGM and T₄ KGM samples was better than that of the T₀ KGM samples.

Solution conformation and flexibility of capsular polysaccharides from Neisseria meningitidis and glycoconjugates with the tetanus toxoid protein

The structural integrity of meningococcal native, micro-fluidized and activated capsular polysaccharides and their glycoconjugates - in the form most relevant to their potential use as vaccines (dilute solution) - have been investigated with respect to their homogeneity, conformation and flexibility. Sedimentation velocity analysis showed that the polysaccharide size distributions were generally bimodal with some evidence for higher molar mass forms at higher concentration. Weight average molar masses Mw where lower for activated polysaccharides. Conjugation with tetanus toxoid protein however greatly increased the molar mass and polydispersity of the final conjugates. Glycoconjugates had an approximately unimodal log-normal but broad and large molar mass profiles, confirmed by sedimentation equilibrium "SEDFIT MSTAR" analysis. Conformation analysis using HYDFIT (which globally combines sedimentation and viscosity data), "Conformation Zoning" and Wales-van Holde approaches showed a high degree of flexibility - at least as great as the unconjugated polysaccharides, and very different from the tetanus toxoid (TT) protein used for the conjugation. As with the recently published finding for Hib-TT complexes, it is the carbohydrate component that dictates the solution behaviour of these glycoconjugates, although the lower intrinsic viscosities suggest some degree of compaction of the carbohydrate chains around the protein.

Konjac glucomannan, a promising polysaccharide of Amorphophallus konjac K. Koch in health care

In recent year, konjac glucomannan (KGM) has attracted more attention due to its non-harmful and non-toxic properties, good biocompatibility, biodegradability and hydrophilic ability. Moreover, KGM and their derivatives have several importances in the multidirectional research areas such as nutritional, biotechnological and fine chemical fields. In the previous article, we have reviewed the nutritional aspects of KGM covering the various aspects of functional foods, food additives and their derivatives. This review aims at highlighting the diverse biomedical research conducted on KGM in the past ten years, covering therapies for anti-obesity, regulation in lipid metabolism, laxative effect, anti-diabetic, anti-inflammatory, prebiotic to wound dressing applications. Moreover, this review deals with global health aspects of KGM and the disparate health related factors associated with diseases and their control measures.

A glycoconjugate of Haemophilus influenzae Type b capsular polysaccharide with tetanus toxoid protein: hydrodynamic properties mainly influenced by the carbohydrate

Three important physical properties which may affect the performance of glycoconjugate vaccines against serious disease are molar mass (molecular weight), heterogeneity (polydispersity), and conformational flexibility in solution. The dilute solution behaviour of native and activated capsular polyribosylribitol (PRP) polysaccharides extracted from Haemophilus influenzae type b (Hib), and the corresponding glycoconjugate made by conjugating this with the tetanus toxoid (TT) protein have been characterized and compared using a combination of sedimentation equilibrium and sedimentation velocity in the analytical ultracentrifuge with viscometry. The weight average molar mass of the activated material was considerably reduced (Mw ~ 0.24 × 10(6) g.mol(-1)) compared to the native (Mw ~ 1.2 × 10(6) g.mol(-1)). Conjugation with the TT protein yielded large polydisperse structures (of Mw ~ 7.4 × 10(6) g.mol(-1)), but which retained the high degree of flexibility of the native and activated polysaccharide, with frictional ratio, intrinsic viscosity, sedimentation conformation zoning behaviour and persistence length all commensurate with highly flexible coil behaviour and unlike the previously characterised tetanus toxoid protein (slightly extended and hydrodynamically compact structure with an aspect ratio of ~3). This non-protein like behaviour clearly indicates that it is the carbohydrate component which mainly influences the physical behaviour of the glycoconjugate in solution.

Characterization of Capsular Polysaccharides and Their Glycoconjugates by Hydrodynamic Methods

Hydrodynamic methods are relevant for the characterization of carbohydrates such as capsular bacterial polysaccharides or glycoconjugates in solution. This chapter focuses on the following hydrodynamic methods: sedimentation velocity analytical ultracentrifugation (SV AUC), dynamic light scattering (DLS), sedimentation equilibrium analytical ultracentrifugation (SE AUC), size exclusion chromatography coupled to multi-angle light scattering (SEC-MALS), and capillary viscometry-intrinsic viscosity measurement. The chapter highlights the general principle of these five methods, describes experimental details, and specifies advances in the last years.

Characterization of glucomannan from Amorphophallus oncophyllus and its prebiotic activity in vivo

Porang (Amorphophallus oncophyllus) is local perennial plant rich in glucomannan. The aim of this study was to extract and characterize glucomannan from porang tuber and to evaluate its potency as prebiotic in vivo. The research consisted of the following steps, i.e. extraction of glucomannan, evaluation of its physico-chemical properties, and in vivo study. Extraction was done by immersing porang fluor with water at 55 °C followed by coagulating glucomannan using ethanol. Solubility, water holding capacity, viscosity, degree of acetylation, degree of polymerization (DP), and purity of the glucomannan were evaluated. In vivo study was done using thirty-two Wistar rats which were divided into four groups. Each group was treated for 14 days with standard AIN 93 (standard), porang glucomannan, commercial konjac glucomannan, and inulin diet as source of fiber. Bacterial population and chemical properties of digesta were analyzed after intervention. The results of the study indicated that the yield of glucomannan from porang flour was 18.05% with 92.69% purity. Compared to commercial glucomannan, porang glucomannan showed higher solubility (86.4%) and degree of acetylation (13.7%), but lower viscosity (5400 cps), WHC (34.5 g/g), and DP (9.4). Diet supplemented with porang glucomannan inhibited the growth of Escherichia coli, enhanced the production of total SCFA, and reduced pH value of cecal content. The study indicated that glucomannan from porang may be used as functional food.

A novel method to estimate the stiffness of carbohydrate polyelectrolyte polymers based on the ionic strength dependence of zeta potential

Polysaccharides have received a great deal of attention from, for example, the food, cosmetic and pharmaceutical industries. Their conformations (flexibility/stiffness) span a wide range of conformational flexibilities with large hydrated volumes, these properties are important in relation to polysaccharide structure-function relationships. Perhaps the simplest parameter available to estimate the dilute solution conformation of polysaccharides is the Smidsrød-Haug stiffness parameter (B) where the stiffness of polyelectrolytes can be estimated by measuring the intrinsic viscosity at a number of different ionic strengths. In this paper we propose an alternative method for estimating the Smidsrød-Haug stiffness parameter (B) using the ionic strength dependency of zeta potential. For this purpose we have studied a number of different polysaccharides.