Performance of egg white and hydroxypropylmethylcellulose mixtures on gelation and foaming

Multifunctional and edible egg white/amylose-tannin bilayer film for perishable fruit preservation

The substantial waste of perishable foods during transportation significantly contributes to greenhouse gas emissions, intensifying the climate crisis. To mitigate the rapid spoilage of fruits, an eco-friendly bilayer film was developed using natural egg white (EW), amylose (Am), and tannic acid (TA). The EW/Am-TA bilayer film features a primary layer of amphiphilic EW, ensuring a uniform coating on hydrophobic fruit surfaces, and a secondary layer composed of Am and TA, imparting notable tensile strength (5.3 ± 0.5 MPa) and elongation at break (28.5 ± 4.1 %). This bilayer film effectively shields fruits from UV-B and UV-C radiation (~0 % transmittance at 280 and 330 nm) and exhibits antioxidant and antibacterial properties due to the presence of TA. Fruits such as bananas, avocados, and cherry tomatoes, when dip-coated with the optimized EW/Am-TA bilayer, maintained their freshness, color, weight, and texture for up to seven days, demonstrating the effectiveness of this bilayer coating in food preservation. The natural materials in the coated film are edible and can be safely removed with tap water at room temperature in <10 s, posing no food safety risks. Thus, the proposed bilayer coating presents a significant solution to the global problem of food waste.

The level of sulfate substitution of polysaccharide regulates thermal-induced egg white protein gel properties: The characterization of gel structure and intermolecular forces

Sulfated polysaccharides exhibit great potential for regulating protein-protein interactions. In the present study, three sulfated microcrystalline cellulose (MCS) with different degrees of sulfate substitution (DSS: 0.33, 0.51, 0.61) were synthesized and the effects of DSS on the regulation of egg white protein (EWP) aggregation and gelation properties were investigated. The results found that the improvement of protein mechanical properties by MCS is closely related to the level of sulfate substitution. The higher the DSS, the more ordered protein aggregates and compact gel network formed during heating as compared to that of pure EWP. Lower DSS (0.33) shows little effect on the mechanical properties of EWP. Furthermore, all the MCSs could significantly destroy the tertiary structure of protein molecules during heating, while for the secondary structure, MCS with higher DSS (0.51 and 0.61) could effectively control the decreasing tendency of α-helix and increasing tendency of β-sheet. Hydrophobic interactions were recognized as the major intermolecular force in the compact mixed gels (EWP/MCS2 and EWP/MCS3 gels, DSS was 0.51 and 0.61, respectively). These findings provide a vital understanding of the gelling mechanism of the protein-polysaccharide system and the application of sulfated polysaccharides in protein-based food products.

Designation and characterization of cold-set egg white protein/dextran sulfate hydrogel for curcumin entrapment

This study aimed to design a cold-set hydrogel of egg white protein (EWP) with good mechanical properties for encapsulating curcumin. Dextran sulfate (DS) and transglutaminase (TGase) were used to control the aggregation and gelation behavior of EWP at preheating step and gelation step, respectively. The optimum soluble protein aggregate size was obtained in the EWP/DS mixture at a mass ratio of 10 under 85 °C preheated (HED₁₀). The presence of TGase further enhanced the cross-linking degree between protein aggregates during the gelation step. The highest gel hardness was found in HED₁₀ hydrogel with TGase, which is almost 10 times the pure EWP gel. Besides, the HED hydrogels effectively slowed down the release rate of curcumin in gastrointestinal digestion. This work provides a theoretical basis for the development of cold-set EWP hydrogel with good mechanical strength by sulfated polysaccharide addition and TGase cross-linking as encapsulation delivery systems.

Evaluation of Processing Conditions and Hydrocolloid Addition on Functional Properties of Aquafaba

Aquafaba, the cooking water from chickpeas, could replace animal-derived ingredients such as egg whites in systems that require the stabilization of an oil or gas phase. However, little is known about how processing methods and additives affect its functional properties. In this study, aquafaba was prepared via boiling or pressure-cooking at water-to-seed (WSR) ratios of 5:1, 4:1 and 3:1. The effects of preparation method and pH adjustment on viscosity, protein content, solubility and profile were evaluated. Samples were further analyzed for foaming capacity/stability (FC/FS) and emulsifying activity/stability index (EAI/ESI). Foams were also prepared in combination with xanthan gum or hydroxypropyl methylcellulose (HPMC). Solubility was lowest near pH 4 and not affected by cooking method and protein profile was not affected by method or ratio. Samples with pH 3 had high EAI and FS, but low ESI and FC. WSR did not significantly affect interfacial properties. Xanthan gum had a greater effect than HPMC on viscosity and prevented foam liquid drainage for 24 h. While the preparation method affects aquafaba properties, subsequent pH adjustment is of greater relevance for interfacial properties. Foam volumes can be maximized and foam drainage limited by appropriate choice of hydrocolloids and addition levels.

An insight on egg white: From most common functional food to biomaterial application

Natural egg white tis widely used as an ingredient in nutritional foods and for food processing. Due to its characteristic foaming, emulsification, adhesion, and gelation, and its heat setting, biocompatibility, and low cost, research into the application and development of egg white in biomaterials, especially medical biomaterials, have been receiving attention. The composition and characteristics of egg white protein, and the physical mixing and chemically cross-linking of egg white with other materials used to make degradable packaging films, bioceramics, bioplastics, biomimetic films, hydrogels, 3D scaffolds, bone regeneration, biopatterning, biosensors, and so forth, are reviewed in detail in this report. The novel egg white-based biomaterials in various forms and applications could be constructed mostly through physical treatments such as ultrasonic wave, ultraviolet, laser and other radiation or high-temperature calcination. Furthermore, the application and prospects for the use of egg white in biomaterials is also discussed.

Effect of polysaccharides on the gel characteristics of "Yu Dong" formed with fish (Cyprinus carpio L.) scale aqueous extract

A novel protein-based gel named "Yu dong" prepared with fish (Cyprinus carpio L.) scale aqueous extract and enhanced by polysaccharides is described in this study. The effects of pectin, alginate, and sodium carboxyl methyl cellulose (CMC-Na) on FS gel formation, stability, textural characteristics, microstructure, and water distribution were evaluated. The results indicated the viscosity of the FS gels decreased and changed slowly as the addition of pectin. While, the addition of alginate enhanced the formation of FS gels. As pectin addition in FS gels, the transition temperature decreased. When alginate and CMC-Na was added to the FS gels, the transition temperature increased. The addition of pectin, alginate, and CMC-Na to the FS gels significantly increased G_r from 44.5% to 71.99%, 61.86%, and 71.35%, respectively. Gel strength increased significantly as the addition of pectin, alginate, and CMC-Na. LF-NMR results showed that a moderate amount (0.2%) of polysaccharides bonded the protein and water more tightly, which was consistent with the SEM results showing gel structure with more uniform pores. This study provides a direct application of FS protein in preparing of gel food, which showing a better way to utilize the abandoned fish resource.

Electrostatic complexation of β-lactoglobulin aggregates with κ-carrageenan and the resulting emulsifying and foaming properties

The electrostatic complexation of protein and polysaccharide and the functional properties of the complexes are significantly affected by the structure of protein aggregates and are important in the development of new food ingredients. In this work, natural globular β-lactoglobulin (NGBLG), β-lactoglobulin nanoparticles (BLGNP), and β-lactoglobulin fibrils (BLGF) were prepared and complexed with κ-carrageenan (κ-car). Phase diagrams of the NGBLG-, BLGNP-, and BLGF-κ-car systems were established and divided into 4 regions: mixed soluble polymers (I), intramolecular soluble complex (II), intermolecular soluble complex (III), and intermolecular insoluble complex (IV). Aggregation shifted the boundaries of regions III and IV of BLGF- or BLGNP-κ-car to lower pH and higher protein aggregates/κ-car weight ratio (r), especially for BLGF-κ-car. The emulsifying and foaming properties of the 3 mixed systems were investigated in regions I and II. Complexes in region II had significantly better emulsifying properties than the corresponding mixtures in region I and the pure protein aggregates. Interestingly, phase separation resulted in different effects on the foaming properties of the 3 BLG-κ-car complexes, in which BLGF-κ-car complexation in region II decreased the foaming properties in region I but the complexation of NGBLG-κ-car and BLGNP-κ-car in region II increased the foaming properties. The BLGF-κ-car complex in regions I and II provided the best emulsifying and foaming properties. Interfacial data both on oil-water and air-water interfaces overall explained the emulsifying and foaming properties of the complexes.