Impact of colloidal structure of gastric digesta on in-vitro intestinal digestion of whey protein emulsion gels

Understanding of formation, gastrointestinal breakdown, and application of whey protein emulsion gels: Insights from intermolecular interactions

Whey protein emulsion gel is an ideal model food for revealing how the multilength scale food structures affect food digestion, as their structure and mechanical properties can be precisely manipulated by controlling the type and intensity of intermolecular interactions between protein molecules. However, there are still significant understanding gaps among intermolecular interactions, protein aggregation and gelation, emulsion gel formation, gel breakdown in the gastrointestinal tract (GIT), and the practical use of whey protein emulsion gels, which limits their GIT-targeted applications. In this regard, the relationship between the structure and digestion behavior of heat-set whey protein emulsion gels is reviewed and discussed mainly from the following aspects: (1) structural characteristics of whey protein molecules; (2) how different types of intermolecular interactions influence heat-induced aggregation and gelation of whey protein in the aqueous solutions and the oil-in-water emulsions, and the mechanical properties of the final gels; (3) functions of the mouth, the stomach, and the small intestine in processing of solid foods, and how different types of intermolecular interactions influence the breakdown properties of heat-set whey protein emulsion gels in GIT (i.e., their respective role in controlling gel digestion). Finally, the implications of knowledge derived from the formation and gastrointestinal breakdown of heat-set whey protein emulsion gels for developing controlled delivery vehicles, human satiety enhancers, and sensory modifiers are highlighted.

Impact of κ-Carrageenan on the Freshwater Mussel (Solenaia oleivora) Protein Emulsion Gels: Gel Formation, Stability, and Curcumin Delivery

Protein-based emulsion gels are an ideal delivery system due to their unique structure, remarkable encapsulation efficiency, and tunable digestive behavior. Freshwater mussel (Solenaia oleivora) protein isolate (SoPI), an emerging sustainable protein with high nutritional value, possesses unique value in the development of functional foods. Herein, composite emulsion gels were fabricated with SoPI and κ-carrageenan (κ-CG) for the delivery of curcumin. SoPI/κ-CG stabilized emulsions possessed a high encapsulation efficiency of curcumin with a value of around 95%. The addition of κ-CG above 0.50% facilitated the emulsion gel formation and significantly improved the gel strength with 1326 g. Furthermore, the storage and digestive stability of curcumin were significantly improved as the κ-CG concentration increased. At 1.50% κ-CG, around 80% and 90% curcumin remained after 21-day storage at 45 °C and the 6 h in vitro gastrointestinal digestion, respectively. The addition of 0.50% κ-CG obtained the highest bioaccessibility of curcumin (~60%). This study illustrated the potential of SoPI emulsion gels as a carrier for stabilizing and delivering hydrophobic polyphenols.

Interactions of White Mugwort (Artemisia lactiflora Wall.) Extract with Food Ingredients during In Vitro Gastrointestinal Digestion and Their Impact on Bioaccessibility of Polyphenols in Various Model Systems

The bioaccessibility of phytochemicals is an important factor for new functional food design. The interaction of white mugwort extract (FE) and food ingredients (coconut oil, egg white albumen, brown rice powder, inulin, and mixtures thereof) was determined after in vitro digestion to inform the development of a functional soup for an aging population. Coconut oil exerted a protective effect on polyphenols, showing the highest bioaccessibility (62.9%) and antioxidant activity after intestinal digestion (DPPH 12.38 mg GAE/g DW, FRAP 0.88 mol Fe(ll)/g DW). In contrast, egg white albumen had the most significant negative effect on the polyphenol stability, resulting in the lowest bioaccessibility (12.49%). Moreover, FE promoted the emulsion stability and delayed starch digestion by inhibiting amylase activity via non-specific polyphenol-protein interactions, resulting in a decrease in the total reducing sugars (TRS) released during digestion. It also limited the protein digestion, probably due to the complex formation of polyphenols and proteins, consequently reducing the bioaccessibility of both amino acids and polyphenols. These findings provide useful information for designing functional food products that could promote the bioaccessibility and bioactivity of natural extracts.

Developing fish oil emulsion gel enriched with Lentinula edodes single cell protein and its effect on controlling the growth of Acinetobacter baumannii

In this study, the characterization of fish oil (FO) emulsion gel (EGEL) containing single cell protein (SCP) produced from Lentinula edodes (L. edodes) and its potential inhibition against Acinetobacter baumannii (A. baumannii) were investigated. Oil extracted from the fish liver was emulsified with tween 80 and water, and then gelled using gelatin with the assistance of an ultrasonic homogenizer. The characteristics and surface analysis of SCP-EGEL were examined using FTIR (Fourier-transform infrared spectroscopy) and SEM (Scanning electron microscope). The particle size distribution and zeta potential of SCP-EGEL were measured using a Malvern Zetasizer. When SCP-EGEL was applied to the surface of the medium inoculated with A. baumannii, the inhibition zone (IZ) was 8.2 mm. An expansion of the IZ was observed (10.2 mm) when SCP-EGEL was applied to a fish skin (FS) surface prepared in the shape of a 6-mm diameter disc. In the SEM images, when SCP was added to lipo gel, the gel structure appeared flattened or swollen in some areas. The appearance of SCP cells being covered with gel gave the impression that they have a secondary wall. Therefore, the resulting complex can potentially be used as an additive in animal and human nutrition, in functional food coatings to suppress A. baumannii, and in fish feed to enrich it with protein.

Impact of κ-Carrageenan on the Cold-Set Pea Protein Isolate Emulsion-Filled Gels: Mechanical Property, Microstructure, and In Vitro Digestive Behavior

More understanding of the relationship among the microstructure, mechanical property, and digestive behavior is essential for the application of emulsion gels in the food industry. In this study, heat-denatured pea protein isolate particles and κ-carrageenan were used to fabricate cold-set emulsion gels induced by CaCl2, and the effect of κ-carrageenan concentration on the gel formation mechanism, microstructure, texture, and digestive properties was investigated. Microstructure analysis obtained by confocal microscopy and scanning electron microscopy revealed that pea protein/κ-carrageenan coupled gel networks formed at the polysaccharide concentration ranged from 0.25% to 0.75%, while the higher κ-carrageenan concentration resulted in the formation of continuous and homogenous κ-carrageenan gel networks comprised of protein enriched microdomains. The hydrophobic interactions and hydrogen bonds played an important role in maintaining the gel structure. The water holding capacity and gel hardness of pea protein emulsion gels increased by 37% and 75 fold, respectively, through increasing κ-carrageenan concentration up to 1.5%. Moreover, in vitro digestion experiments based on the INFOGEST guidelines suggested that the presence of 0.25% κ-carrageenan could promote the digestion of lipids, but the increased κ-carrageenan concentration could delay the lipid and protein hydrolysis under gastrointestinal conditions. These results may provide theoretical guidance for the development of innovative pea protein isolate-based emulsion gel formulations with diverse textures and digestive properties.

Modulating in vitro digestion of whey protein cold-set emulsion gels via gel properties modification with gallic acid and EGCG

Gallic acid (GA) and epigallocatechin gallate (EGCG), cooperated at varied ratios (1:0, 3:1, 1:1, 1:3, and 0:1), were employed to modify gel properties of calcium induced-whey protein emulsion gel. The effects of GA/EGCG on emulsion morphology, as well as gel properties and in vitro digestive behavior of the emulsion gels were investigated. Compared with emulsions without phenolics, GA/EGCG induced slightly smaller particle size and stronger electrostatic repulsion between emulsion droplets. Moreover, GA/EGCG, notably at a ratio of 3:1, promoted electrostatic and hydrophobic interactions between protein molecules and the formation of a compact and filamentous gel microstructure, resulting in a remarkable increment in the gel strength (up to 106 %). Furthermore, in vitro oral digestion, dynamic gastric digestion (using an artificial gastric digestive system, AGDS), and intestinal digestion of the emulsion gels were simulated. Particle size and protein hydrolysis results revealed that GA/EGCG was prone to weaken the physical disintegration of gels, reduce protein hydrolysis, and enhance the stability of emulsified oil droplets during dynamic gastric digestion. As a consequence, delayed release of oil droplets was observed in the gels and more free fatty acids were released in the intestinal digestion, particularly in the gel with GA/EGCG (3:1). These findings would provide novel strategies for application of phenolic compounds in developing protein gel-based delivery systems.

Comparison of four digestion protocols on the physical characteristics of gastric digesta from cooked couscous using the Human Gastric Simulator

In vitro digestion is widely employed in food, nutraceutical and pharmaceutical research, and numerous in vitro gastric digestion protocols have been proposed, with a wide range of experimental conditions. Differences in the simulated gastric fluids (pH, mineral content, enzyme type and enzyme activity) of different digestion protocols may alter the results for the digestion of the same meal. This study aimed to investigate how variations in the gastric secretion rate and composition in four in vitro digestion protocols (Infogest Riddet, Infogest Semi-dynamic, UC Davis and United States Pharmacopeia) impacted the physical properties of the emptied gastric digesta. Cooked couscous was used as a model meal and subjected to simulated gastric digestion using a dynamic gastric model, the Human Gastric Simulator (HGS). The digesta were collected from the outlet of the HGS after 15, 30, 60, 90, 120, 150, or 180 min. The gastric emptying of dry matter, pH, rheological properties, and particle size were evaluated. The digestion protocol significantly influenced the solid content and moisture content of the digesta (p < 0.001), particles per gram of dry matter (p < 0.0001), gastric emptying of dry matter (p < 0.003), shear stress at 0.45 s-1 and consistency coefficient (p < 0.0001). The presence of NaHCO3 in the Infogest Riddet and Infogest Semi-dynamic gastric secretions provided an additional buffering effect and increased the digesta pH during gastric digestion. Similarly, the inclusion of mucin in the UC Davis protocol resulted in a higher flow and viscoelastic properties of the emptied digesta. The highest dilution of gastric content in the United States Pharmacopeia (USP) protocol resulted in larger particles emptied from the HGS and the longest gastric emptying half-time of all digestion protocols. These findings provide new insights into the impact of digestion protocols on the digesta properties, which can be beneficial for the design and standardization of in vitro digestion models.

The impact of differently structured starch gels on the gastrointestinal fate of a curcumin-containing nanoemulsion

In this study, we focused on the in vitro gastrointestinal digestion of curcumin-nanoemulsion-loaded corn starch gels formed using starches with different amylose contents, i.e. waxy (WCS), normal (NCS) and high amylose (HACS) corn starches and their impact on the release and bioaccessibility of curcumin. Curcumin nanoemulsion (CNE) loading significantly increased the storage modulus of the WCS and NCS gels by interspersing in the gelatinized continuous phase, whereas it decreased in the HACS gel due to the formation of a weak network structure as a result of the incomplete gelatinized amylose granules. During the gastric digestion, the disintegration and emptying of the WCS + CNE gel from the stomach was the slowest compared to the other two gels. The changes in the stomach, influenced the emptying of total solids (HACS + CNE > NCS + CNE > WCS + CNE) into the gastric digesta, which further affected the rate of starch and lipid digestion during the intestinal phase. The HACS + CNE and NCS + CNE gels showed a higher and faster release of curcumin compared to the WCS + CNE gel that showed a slower and sustained release during the intestinal digestion. This study demonstrated that the oral-gastric digestion of these starch gels was more dependent on the gel structures rather than on the molecular properties of the starches. The dynamic gastric environment resulted in the formation of distinct gel structures, which significantly influenced the composition and microstructure of the emptied digesta, further affecting starch hydrolysis and curcumin bioaccessibility in the small intestine.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Intermolecular forces regulate in-vitro digestion of whey protein emulsion gels: Towards controlled lipid release

HYPOTHESIS

The utilization of emulsion-filled protein hydrogels for controlled lipid release in the gastrointestinal tract (GIT) displays great potential in drug delivery and obesity treatment. However, how intermolecular interactions among protein molecules influence lipid digestion of the gels is still understudied.

EXPERIMENTS

Differently structured whey protein emulsion gels were fabricated by heating emulsions with blocking of disulfide bonds (the "noncovalent" gel), noncovalent interactions (the "disulfide" gel), or neither of these (the "control" gel). The intermolecular interactions-gel structure-lipid digestion relationship was investigated by characterizing structural/mechanical properties of the gels and monitoring their dynamic breakdown in a simulated GIT.

FINDINGS

Although the disulfide-crosslinked protein network formed thick interfacial layers around oil droplets and resisted intestinal proteolysis, the "disulfide" gel had the fastest lipolysis rate, indicating that it could not inhibit the access of lipases to oil droplets. In contrast, the "noncovalent" gel was more susceptible to in-vitro digestion than the "control" gel because of lower gel strength, resulting in a faster lipolysis rate. This demonstrated that intermolecular disulfide bonds and noncovalent interactions played distinctive roles in the digestion of the gels; they represented the structural backbone and the infill in the gel structure, respectively.

Structural modification of zein-based oil-in-glycerol emulsion gels for improved textural and digestion behaviors

Zein can dissolve in glycerol, and can be developed into oil-in-glycerol emulsion gels to widen its applications. The current study focused on modulating the structures of zein-based emulsion gels by the addition of a surface active ingredient (Span 20, SP) to improve textural and digestion behaviors. Microstructural observation indicated that the addition of SP replaced zein from the oil-glycerol interface, and allowed a higher level of oil droplet aggregation. After adding SP, the gel hardness decreased from 3.43 ± 0.14 N to 1.62 ± 0.01 N, and the storage modulus also decreased with the increase of SP content. Viscoelasticity of the gels was thermo-responsive, and the presence of SP contributed to a higher recovery of the storage modulus after the heating-cooling process. The addition of SP reduced the oil-binding capacity of zein gel from 97.61 ± 0.19% to 82.00 ± 0.92% and the solvent-binding capacity from 75.97 ± 3.05% to 62.25 ± 0.22%, indicating that the zein network was weakened. Then, gels were mixed with simulated digestive juices to track the changes of gel structures and the release of free fatty acids. The addition of SP accelerated the digestion process, especially intestinal digestion. SP contributed to a higher fluorescence intensity in the digesta, which was a sign of a higher level of digestion of zein. Subsequently, the addition of SP increased the release content of free fatty acids from 4.27 ± 0.71% to 5.07 ± 1.27%. The above findings would be useful in designing zein-based functional food products with favored textural and digestion properties.

Impact of Recombined Milk Systems on Gastrointestinal Fate of Curcumin Nanoemulsion

Milk powder is an important ingredient in various foods and pediatric formulations. The textural and digestion properties of the formulations depend on the preheat treatment of the milk powder during manufacture. Thus, it is interesting to know how these modifications can influence on the release of fortified bioactive compounds during digestion with a milk matrix. In this study, a curcumin nanoemulsion was incorporated into milks reconstituted from low-heat, medium-heat and high-heat skim milk powders (SMPs) and the milks were subjected to semi dynamic in vitro digestion. All the recombined milk systems formed a curd under gastric conditions, which reduced the gastric emptying of protein and curcumin-loaded oil droplets. Because of the formation of heat-induced casein/whey protein complexes, the open fragmented curd formed by the high-heat-treated reconstituted powder resulted in higher protein and oil droplets emptying to the intestine and higher curcumin bioaccessibility. This study provides useful information for how protein ingredients can govern the fate of added health-promoting compounds during digestion.

Gelling Characteristics of Emulsions Prepared with Modified Whey Protein by Multiple-Frequency Divergent Ultrasound at Different Ultrasonic Power and Frequency Mode

The effect of ultrasonic frequency mode (mono, dual and tri-frequency) and ultrasonic power (0–300 W) on structural properties (intrinsic fluorescence and sulfhydryl content) of whey protein was studied. Emulsions prepared with modified whey protein were used to form the heat-set gels, and the properties of whey protein emulsion gels (WPEG) and their digestion were investigated. The textural and rheological properties of WPEG prepared using whey protein pretreated by mono and dual-frequency ultrasound at the power between 180–240 W were enhanced, while those of WPEG prepared with whey protein pretreated by triple-frequency above the power of 180 W were declined. WPEG prepared using whey protein pretreated by dual-frequency ultrasound (DFU) with the power of 240 W had the highest hardness and storage modulus which were 3.07 and 1.41 times higher than the control. The microstructure of WPEG prepared using DFU pretreated whey protein showed homogeneous and denser networks than those of the control according to the results of confocal laser scanning microscope (CLSM). The modification in the microstructure and properties of the WPEG prepared using DFU pretreated whey protein delayed the protein disintegration during the first 30 min of gastric digestion when compared with control. Whereas the release rate of free amino group of the WPEG prepared using whey protein modified by ultrasonic pretreatment increased during the intestinal phase when compared with that of control. The results indicated that using dual-frequency ultrasound to modify whey protein is more efficient in improving the properties of WPEG, and ultrasonic power should be considered during the application of ultrasound pretreatment in producing protein gels. The fine network of WPEG prepared with whey protein pretreated by ultrasound resulted in better hardness and storage modulus. Partially unfolding of the protein induced by ultrasound pretreatment might make the whey protein more susceptible to the digestive enzyme. Our results could provide new insights for using ultrasound as the potential processing tool on designing specific protein emulsion gels as the delivery system for nutrients.

Water-in-Oil Emulsion Gels Stabilized by a Low-Molecular Weight Organogelator Derived from Dehydroabietic Acid

High concentrations of surfactants or gelators are usually necessary to prepare emulsions gels with unusual physicochemical properties. This situation may be improved by innovating the aggregate morphology in systems. Herein, a rosin-based molecule is designed and synthesized using dehydroabietic acid as the starting material (denoted as R-Lys-R). The molecule acts as an effective organogelator and can gelate several hydrocarbon compounds with a minimum gelation concentration of 0.2% (w/v). Analysis using atomic force microscopy (AFM) and circular dichroism (CD) reveals that in n-decane, R-Lys-R forms left-handed helical fibers with a cross-sectional diameter of approximately 15 nm. The directional hydrogen bonding of the amide group is helpful to the formation of aggregates. At concentrations of R-Lys-R above 2%, water-in-oil emulsions are transformed into emulsion gels owing to the aptitude of R-Lys-R in gelating the oil phase. The concentrations of the emulsifier can be adjusted to obtain emulsion gels with different formulations. This work reveals the potential of rosin derivatives for the formation of small molecular weight organogels and provides a novel method for the utilization of natural resources in soft materials and home care products.

Preparation and Characterization of a Novel Soy Protein Isolate-Sugar Beet Pectin Emulsion Gel and Its Application as a Multi-Phased Nutrient Carrier

Emulsion gel, a novel oral delivery carrier, provides the possibility to co-load hydrophilic and lipophilic nutrients simultaneously. In this study, duo-induction methods of laccase and glucono-δ-lactone (L&GDL) or laccase and transglutaminase (L&MTG) were used to prepare the soy protein isolate-sugar beet pectin (SPI-SBP) emulsion gel. The textural data of the emulsion gel was normalized to analyze the effect of different induction methods on the gel property of the SPI-SBP emulsion gels. The characterization studies showed the structure of L&MTG emulsion gel was denser with a lower swelling ratio and reduced degree of digestion, compared with L&GDL emulsion gel. Moreover, the release profiles of both β-carotene and riboflavin co-loaded in the SPI-SBP emulsion gels were correlated to the digestion patterns of the gel matrix; the controlled-release of encapsulated functional factors was regulated by a gel network induced by different induction methods, mainly due to the resulting porosity of the structure and swelling ratio during digestion. In conclusion, SPI-SBP emulsion gels have the capability of encapsulating multiple functional factors with different physicochemical properties.

Understanding the oral processing of solid foods: Insights from food structure

Understanding the relationship between the structure of solid foods and their oral processing is paramount for enhancing features such as texture and taste and for improving health-related factors such as management of body weight or dysphagia. This paper discusses the main aspects of the oral processing of solid foods across different categories: (1) oral physiology related to chewing, (2) in-mouth food transformation, (3) texture perception, and (4) taste perception, and emphasis is placed on unveiling the underlying mechanisms of how food structure influences the oral processing of solid foods; this is exemplified by comparing the chewing behaviors for a number of representative solid foods. It highlights that modification of the texture/taste of food based on food structure design opens up the possibility for the development of food products that can be applied in the management of health.

Effect of Gel Structure on the In Vitro Gastrointestinal Digestion Behaviour of Whey Protein Emulsion Gels and the Bioaccessibility of Capsaicinoids

This study investigated the effect of gel structure on the digestion of heat-set whey protein emulsion gels containing capsaicinoids (CAP), including the bioaccessibility of CAP. Upon heat treatment at 90 °C, whey protein emulsion gels containing CAP (10 wt% whey protein isolate, 20 wt% soybean oil, 0.02 wt% CAP) with different structures and gel mechanical strengths were formed by varying ionic strength. The hard gel (i.e., oil droplet size d_4,3 ~ 0.5 μm, 200 mM NaCl), with compact particulate gel structure, led to slower disintegration of the gel particles and slower hydrolysis of the whey proteins during gastric digestion compared with the soft gel (i.e., d_4,3 ~ 0.5 μm, 10 mM NaCl). The oil droplets started to coalesce after 60 min of gastric digestion in the soft gel, whereas minor oil droplet coalescence was observed for the hard gel at the end of the gastric digestion. In general, during intestinal digestion, the gastric digesta from the hard gel was disintegrated more slowly than that from the soft gel. A power-law fit between the bioaccessibility of CAP (Y) and the extent of lipid digestion (X) was established: Y = 49.2 × (X - 305.3)^0.104, with R² = 0.84. A greater extent of lipid digestion would lead to greater release of CAP from the food matrix; also, more lipolytic products would be produced and would participate in micelle formation, which would help to solubilize the released CAP and therefore result in their higher bioaccessibility.

Impact of the Simulated Gastric Digestion Methodology on the In Vitro Intestinal Proteolysis and Lipolysis of Emulsion Gels

The aim of this work was to study the impact of the methodology of in vitro gastric digestion (i.e., in terms of motility exerted and presence of gastric emptying) and gel structure on the degree of intestinal proteolysis and lipolysis of emulsion gels stabilized by whey protein isolate. Emulsions were prepared at pH 4.0 and 7.0 using two homogenization pressures (500 and 1000 bar) and then the emulsions were gelled by heat treatment. These gels were characterized in terms of texture analysis, and then were subjected to one of the following gastric digestion methods: in vitro mechanical gastric system (IMGS) or in vitro gastric digestion in a stirred beaker (SBg). After gastric digestion, the samples were subjected to in vitro intestinal digestion in a stirred beaker (SBi). Hardness, cohesiveness, and chewiness were significantly higher in gels at pH 7.0. The degree of proteolysis was higher in samples digested by IMGS–SBi (7–21%) than SBg–SBi (3–5%), regardless of the gel’s pH. For SBg–SBi, the degree of proteolysis was not affected by pH, but when operating the IMGS, higher hydrolysis values were obtained for gels at pH 7.0 (15–21%) than pH 4.0 (7–13%). Additionally, the percentage of free fatty acids (%FFA) released was reduced by 47.9% in samples digested in the IMGS–SBi. For the methodology SBg–SBi, the %FFA was not affected by the pH, but in the IMGS, higher values were obtained for gels at pH 4.0 (28–30%) than pH 7.0 (15–19%). Our findings demonstrate the importance of choosing representative methods to simulate food digestion in the human gastrointestinal tract and their subsequent impact on nutrient bioaccessibility.

Biopolymer Additives Enhance Tangeretin Bioavailability in Emulsion-Based Delivery Systems: An In Vitro and In Vivo Study

The oral bioavailability of tangeretin, a poly(methoxyflavone) found in citrus fruits, is typically very low because of its extremely limited solubility. In this research, tangeretin was encapsulated within whey protein-stabilized emulsions containing ingredients that may alter their behavior under gastrointestinal conditions and enhance the bioavailability of tangeretin after oral administration: cinnamaldehyde (CA), gum arabic (GA), or hydroxypropyl methylcellulose (HPMC). The presence of these ingredients altered the size, aggregation state, and encapsulation efficiency of tangeretin in the emulsions. In vitro studies demonstrated that the bioaccessibility of the encapsulated tangeretin was much higher than that of a crude tangeretin oil suspension. Particularly, the addition of HPMC increased the bioaccessibility of tangeretin from around 36 to 90%. In vivo pharmacokinetics results using rats indicated that tangeretin concentration in the plasma increased from 4- to 20-fold after encapsulation, especially in the presence of HPMC. HPMC also prolonged the release of tangeretin to 22 h. Tangeretin preferentially accumulated within the liver and kidney of the animals. Overall, the knowledge confirmed that structured emulsion-based delivery systems could be used to improve the oral bioavailability of hydrophobic functional ingredients.

In vitrogastrointestinal digestibility of phytosterol oleogels: influence of self-assembled microstructures on emulsification efficiency and lipase activity

The objective of this study was to investigate the influence of a self-assembled microstructure on lipid digestibility of phytosterol (γ-oryzanol and β-sitosterol) oleogels, including the oil emulsification process and further lipolysis.

A bi-component supramolecular gel for selective fluorescence detection and removal of Hg2+ in water

A bi-component supramolecular gel (RQ) was successfully constructed by the assembly of the gelators 4-aminophenyl functionalized naphthalimide derivative (R) and tri-(pyridine-4-yl)-functionalized trimesic amide (Q) in DMSO-H2O (6.1 : 3.9, v/v) binary solution. The gel RQ exhibits excellent self-healing capacity. Interestingly, the RQ could fluorescently detect and reversibly remove Hg2+ from water through cation-π interactions with high selectivity, efficient adsorption and quick response. The limit of lowest detection (LOD) of the RQ for Hg2+ is 4.52 × 10-8 M and the separation ratio is 91.14%. Moreover, the RQ could be efficiently recycled and regenerated with little loss via a simple treatment by I-. Notably, thin films based on RQ and RQ + Hg2+ were prepared, which could serve as convenient and efficient test tools for the detection of Hg2+ and I-, respectively. This work provided an efficient method and novel supramolecular gel material for the separation and detection of Hg2+.

Effect of the Solid Fat Content on Properties of Emulsion Gels and Stability of β-Carotene

Whey-protein-isolate-based emulsion gels were prepared through a cold-set gelation process, and the effect of the solid fat (coconut oil) content in the oil phase on gel properties and β-carotene stability was investigated. An increase in solid fat content (0, 20, 50, 80, and 100% of the oil phase) resulted in a smaller droplet size, higher viscosity, and improved creaming stability of the emulsions. When glucono-δ-lactone was added to initiate gelation, a higher solid fat content contributed to an earlier onset of gelation and a higher storage modulus of the gels. Textural analysis indicated that the increase in the solid fat content allowed for an increase in fracture stress and Young's modulus of the emulsion gels. Microscopic observation revealed that emulsions containing a higher solid fat content formed gels with a denser and more uniform particulate network structure. The stability of β-carotene against thermal treatment (55 °C for 12 days) and ultraviolet light exposure (8 h) was determined. The results suggested that the solidification of the oil phase can improve the stability of β-carotene, and gels with higher hardness were capable of retaining more β-carotene after the treatments. These findings indicated that emulsion gels with a solidified oil phase could be potential delivery systems for lipophilic bioactive compounds.

Food Matrix Design for Effective Lactic Acid Bacteria Delivery

The range of foods featuring lactic acid bacteria (LAB) with potential associated health benefits has expanded over the years from traditional dairy products to meat, cereals, vegetables and fruits, chocolate, etc. All these new carriers need to be compared for their efficacy to protect, carry, and deliver LAB, but because of their profusion and the diversity of methods this remains difficult. This review points out the advantages and disadvantages of the main food matrix types, and an additional distinction between dairy and nondairy foods is made. The food matrix impact on LAB viability during food manufacturing, storage, and digestion is also discussed. The authors propose an ideal hypothetical food matrix that includes structural and physicochemical characteristics such as pH, water activity, and buffering capacities, all of which need to be taken into account when performing LAB food matrix design. Guidelines are finally provided to optimize food matrix design in terms of effective LAB delivery.

Physicochemical and oxidative stability of a soybean oleosome-based emulsion and its in vitro digestive fate as affected by (-)-epigallocatechin-3-gallate

Oleosomes, which are pre-emulsified oil bodies found naturally in plants, have excellent stability, therefore making their use more popular in the food industries. However, the mechanism of EGCG in regulating the physicochemical and oxidative stability, and digestion of oleosome emulsions is not yet clear. In this study, the effect of EGCG on the properties of soybean oleosome emulsions (SOE) was examined at different pH values (5.0, 7.0, and 9.0). EGCG was significantly more effective in maintaining the stability of SOE at pH 5.0 and 7.0 over the 14 days of storage, but less effective at pH 9.0. Furthermore, lipid oxidation of SOE at pH 7.0 was successfully retarded by incorporating EGCG, but not at pH 5.0 and 9.0. The in vitro gastrointestinal results suggested that EGCG retarded the digestion rate of SOE based on a 20% reduction in free fatty acid release. The results of this study will help food technologists to design slow-digestive oleosome-based products that will satisfy health-conscious consumers' demand for healthier food choices.

The Physical State of Emulsified Edible Oil Modulates Its in Vitro Digestion

Emulsified lipid digestion was tailored by manipulating the physical state of dispersed oil droplets in whey protein stabilized oil-in-water (O/W) emulsions, where the oil phase consisted of one of five ratios of soybean oil (SO) and fully hydrogenated soybean oil (FHSO). The evolution in particle size distribution, structural changes during oral, gastric, and intestinal digestion, and free fatty acid release during intestinal digestion were all investigated. Irrespective of the physical state and structure of the dispersed oil/fat, all emulsions were stable against droplet size increases during oral digestion. During gastric digestion, the 50:50 SO:FHSO emulsion was more stable against physical breakdown than any other emulsion. All emulsions underwent flocculation and coalescence or partial coalescence upon intestinal digestion, with the SO emulsion being hydrolyzed the most rapidly. The melting point of all emulsions containing FHSO was above 37 °C, with the presence of solid fat within the dispersed oil droplets greatly limiting lipolysis. Fat crystal polymorph and nanoplatelet size did not play an important role in the rate and extent of lipid digestion. Free fatty acid release modeled by the Weibull distribution function showed that the rate of lipid digestion (κ) decreased with increasing solid fat content, and followed an exponential relationship (R² = 0.95). Overall, lipid digestion was heavily altered by the physical state of the dispersed oil phase within O/W emulsions.

Altering the level of calcium changes the physical properties and digestibility of casein-based emulsion gels

Casein-based emulsion gels prepared with different types of lipid (i.e. milk fat or rapeseed oil) were formulated with high (774 mg Ca per 100 g) or low (357 mg Ca per 100 g) calcium levels by blending acid and rennet casein. Their physicochemical characteristics (i.e. composition, texture, microstructure & water mobility) and in vitro digestibility were compared to conventionally formulated high-calcium (723 mg Ca per 100 g) emulsion gels made from rennet casein with calcium chelating salts (CCS). CCS-free, high-calcium emulsion gels were significantly (p ≤ 0.05) softer than those with low calcium levels (possibly due to their shorter manufacture time and higher pH) and showed the highest rates of disintegration during simulated gastric digestion. Despite having a higher moisture to protein ratio, the high-calcium emulsion gels containing CCS had broadly similar hardness values to those of high-calcium concentration prepared without CCS, but had higher cohesiveness. The high-calcium matrices containing CCS had quite a different microstructure and increased water mobility compared to those made without CCS and showed the slowest rate (p ≤ 0.05) of disintegration in the gastric environment. Gastric resistance was not affected by the type of lipid phase. Conversely, fatty acid release was similar for all emulsion gels prepared from milk fat, however, high-calcium emulsion gels (CCS-free) prepared from rapeseed oil showed higher lipolysis. Results suggest that food matrix physical properties can be modified to alter resistance to gastric degradation which may have consequences for the kinetics of nutrient release and delivery of bioactives sensitive to the gastric environment.

Use of imaging techniques to identify efficient controlled release systems of Lactobacillus rhamnosus GG during in vitro digestion

Complementary microscopy techniques were used to highlight the importance of matrix formulation on lactic acid bacteria delivery system efficiency.