Lutein-enriched emulsion-based delivery systems: Impact of Maillard conjugation on physicochemical stability and gastrointestinal fate

Fabrication, characterization and gastrointestinal fate of curcumin-loaded emulsions stabilized by soy protein-based ternary composite nanoparticles

To design a novel emulsifier capable of enhancing the bioavailability of curcumin (Cur)-loaded emulsions in the gastrointestinal tract, soy protein-based ternary composite nanoparticles (SEPn) were fabricated by transacylation reaction. The results showed that SEPn was formed by the covalent binding of the carboxyl groups in PGA to the amino groups in SEC through multiple forces. SEPn-1:1 was determined to be the optimal condition for preparing Cur-loaded emulsions. Additionally, SEPn-1:1 had superior emulsifying capacity as formed plastic-state emulsion gel with φ as low as 0.5. Moreover, the rise in oil content promoted the development of gel, thus increasing the apparent viscosity, gel strength, and stability of Cur-loaded emulsions. Furthermore, SEPn-1:1 emulsion exhibited excellent gastric stability and higher free fatty acid (FAA) release rates in the small intestine phase compared with that of SECcon (SEC control sample) and Mixture emulsion, thus leading to the highest bioavailability of Cur (28.57 ± 1.91 %).

Effects of Conjugation with Basil Seed Gum on Physicochemical, Functional, Foaming, and Emulsifying Properties of Albumin, Whey Protein Isolate and Soy Protein Isolate

Protein conjugation with the Maillard reaction has received considerable attention in the past decades in terms of improving functional properties. This study evaluated the changes in the techno-functional properties of whey protein isolate (WPI), soy protein isolate (SPI), and albumin (Alb) after conjugation with basil seed gum (BSG). The conjugates were developed via the Maillard reaction. Various analyses including FT-IR, XRD, SEM, SDS-PAGE, DSC, RVA, rheology, zeta potential, emulsion, and foaming ability were used for evaluating conjugation products. Conjugation between proteins (WPI, SPI, Alb) and BSG was validated by FT-IR spectroscopy. XRD results revealed a decrease in the peak of BSG after conjugation with proteins. SDS-PAGE demonstrated the conjugation of WPI, SPI, and Alb with BSG. DSC results showed that conjugation with BSG reduced the Tg of WPI, SPI, and Alb from 210.21, 207.21, and 210.90 °C to 190.30, 192.91, and 196.66 °C, respectively. The emulsion activity and emulsion stability of protein/BSG conjugates were increased significantly. The droplet size of emulsion samples ranged from 112.1 to 239.3 nm on day 3. Nanoemulsions stabilized by Alb/BSG conjugate had the smallest droplet sizes (112.1 and 143.3 nm after 3 and 17 days, respectively). The foaming capacity of WPI (78.57%), SPI (61.91%), and Alb (71.43%) in their mixtures with BSG increased to 107.14%, 85.71%, and 85.71%, respectively, after making conjugates with BSG. The foam stability of WPI (39.34%), SPI (61.57%), and Alb (53.37%) in their mixtures with BSG (non-conjugated condition) increased to 77.86%, 77.91%, and 72.32%, respectively, after formation of conjugates with BSG. Conjugation of BSG to proteins can improve the BSG applications as a multifunctional stabilizer in pharmaceutical and food industries.

Glycation-mediated pea protein isolate-curcumin conjugates for uniform walnut oil dispersion: enhancing oxidative stability and shelf life

BACKGROUND

Traditional methods for fabricating protein-polyphenol conjugates have not preserved the structural and functional integrity essential for the food industry effectively. This research introduces an advanced encapsulation methodology designed to overcome these limitations, with the potential to enhance the stability of edible oil matrices significantly, leading to improved preservation techniques and extended shelf life.

RESULTS

Glycated pea protein isolate-curcumin conjugates (gPPI-CUR) were developed, demonstrating a marked improvement in the oxidative stability of walnut oil (WO), a proxy for edible oil matrices. Characterized by a Z-average diameter of 158.37 nm and an encapsulation efficiency of 80.94%, these conjugates demonstrated exceptional performance in reducing lipid oxidation and aldehyde formation. Molecular docking analysis confirmed the formation of robust bonds with curcumin, thereby amplifying antioxidant activity. The uniform distribution of gPPI-CUR throughout the walnut oil matrix, as validated by confocal microscopy, ensured sustained bioactivity and mitigated the risk of localized oxidation. Electron spin resonance spectroscopy corroborated the superior antioxidant properties of the conjugates, which translated into a substantial 19-day increase in the shelf-life of the oil.

CONCLUSION

The gPPI-CUR conjugates enhanced the oxidative stability of walnut oil significantly, as demonstrated by the increased shelf life and reduced lipid oxidation. This study introduced an effective encapsulation method that improved the stability and extended the shelf life of edible oils, aligning with consumer demands for high-nutrition food products. The results indicate that the gPPI-CUR conjugates could serve as a promising antioxidant strategy for food preservation, offering a practical approach to enhance food quality and safety. © 2025 Society of Chemical Industry.

Physicochemical stability and controlled release of vitamin D3-loaded emulsions stabilised by whey protein isolate-basil seed gum conjugates

AIM

The present study was conducted to produce a new carrier containing whey protein isolate-basil seed gum (WPI-BSG) conjugate to achieve superior physicochemical stability of emulsions containing vitamin D3 (Vit-D3).

METHODS

Zeta-potential and particle size analysis, spectrophotometric method, encapsulation efficiency, loading capacity and dialysis bag method were used to examined physicochemical stability and Vit-D3 release from the emulsions.

RESULTS

The conjugate-stabilised emulsion showed maximum encapsulation efficiency (87.05 ± 3.37% (w/w)) and loading capacity (5.43 ± 0.08% (w/w)) at the Vit-D3 concentration of 200 and 300 mg/kg. This emulsion also demonstrated good physical stability after 30 days of storage with the zeta potential and mean droplet size of -79.60 ± 0.62 mV and 1346.82 ± 5.95 nm, respectively. Additionally, the conjugate-stabilised emulsion had a maximum Vit-D3 retention (chemical stability) of 72.79 ± 3.58% after a 15-day storage period.

CONCLUSION

Our findings suggest that the conjugate-stabilised emulsion has a good stabilising capacity as a carrier for hydrophobic compounds such as Vit-D3.

Characterization of modified starch-based complexes-stabilized linolenic acid emulsions and their enhanced oxidative stability in vitro gastrointestinal digestion

A new approach of fabricating α-linolenic acid emulsions with enhanced oxidative stability in vitro digestion was established, using covalent octenyl succinic anhydride starch (OSAS)-soy protein (SP)-epigallocatechin-3-gallate (EGCG) complexes as emulsifiers. The physicochemical characteristics and surface morphology of emulsions were mainly characterized by rheological measurements, laser scanning microscope (CLSM) and cryo-scanning electron microscopy (Cryo-SEM). Results indicated that emulsions had dense interfacial layers and strong network structures. As a result, the stability and antioxidant ability of emulsions were improved significantly. In addition, the oxidative stability of emulsions in vitro gastrointestinal digestion was explored. Results showed that emulsions could maintain better oxidative stability owing to antioxidant activity of covalent OSAS-SP-EGCG complexes under gastrointestinal conditions. In particular, lipid hydroperoxide and malondialdehyde contents of emulsions prepared by 1:4 complexes were lower than 0.35 mmol/L and 20.5 nmol/mL, respectively, approximately half those of emulsions stabilized by OSAS (0.65 mmol/L and 39.5 nmol/mL). It was indicated that covalent OSAS-SP-EGCG complexes could effectively inhibit α-linolenic acid oxidation in emulsions during vitro gastrointestinal digestion. This work will provide a theoretical basis for the development of α-linolenic acid emulsions, which will help to broaden application of α-linolenic acid in food industry.

Enhancing Stability and Antioxidant Activity of Resveratrol-Loaded Emulsions by Ovalbumin-Dextran Conjugates

A reliable strategy for improving the stability and shelf life of protein-stabilized systems is by covalently attaching the protein onto a polysaccharide. In this study, ovalbumin (OVA) was modified with dextran (DEX) of different molecular weights by the Maillard reaction, and was used to enhance the stability of emulsions loaded with resveratrol. The surface hydrophobicity, thermal stability, and FT-IR spectroscopy of the OVA-DEX conjugates were evaluated. The results showed that the surface hydrophobicity of OVA decreased, while the thermal stability of OVA was significantly improved after DEX covalent modification. The OVA-DEX1k-stabilized emulsion exhibited high encapsulation efficiency of resveratrol, with the value of 89.0%. In addition, OVA-DEX was considerably more effective in droplet stabilization against different environmental stresses (heat, pH, and ionic strength). After 28 days of storage at 25 °C, the OVA-stabilized emulsion showed faster decomposition of resveratrol, whereas the OVA-DEX-conjugate-stabilized emulsion had approximately 73% retention of resveratrol. Moreover, the antioxidant activity of resveratrol-loaded emulsions stabilized by OVA-DEX was higher during storage under different temperatures. These results proved that the OVA-DEX conjugates had the potential to form stable, food-grade emulsion-based delivery systems against environmental stresses, which strongly supports their potential in the field of food and biomedical applications.

Improved bioavailability and antioxidation of β-carotene-loaded biopolymeric nanoparticles stabilized by glycosylated oat protein isolate

The limited bioavailability of β-carotene hinders its potential application in functional foods, despite its excellent antioxidant properties. Protein-based nanoparticles have been widely used for the delivery of β-carotene to overcome this limitation. However, these nanoparticles are susceptible to environmental stress. In this study, we utilized glycosylated oat protein isolate to prepare nanoparticles loaded with β-carotene through the emulsification-evaporation method, aiming to address this challenge. The results showed that β-carotene was embedded into the spherical nanoparticles, exhibiting relatively high encapsulation efficiency (86.21 %) and loading capacity (5.43 %). The stability of the nanoparticles loaded with β-carotene was enhanced in acidic environments and under high ionic strength. The nanoparticles offered protection to β-carotene against gastric digestion and facilitated its controlled release (95.76 % within 6 h) in the small intestine, thereby leading to an improved in vitro bioavailability (65.06 %) of β-carotene. This improvement conferred the benefits on β-carotene nanoparticles to alleviate tert-butyl hydroperoxide-induced oxidative stress through the upregulation of heme oxygenase-1 and NAD(P)H quinone dehydrogenase 1 expression, as well as the promotion of nuclear translocation of nuclear factor-erythroid 2-related factor 2. Our study suggests the potential for the industry application of nanoparticles based on glycosylated proteins to effectively deliver hydrophobic nutrients and enhance their application.

Covalent polyphenols-proteins interactions in food processing: formation mechanisms, quantification methods, bioactive effects, and applications

Proteins and polyphenols are abundant in the daily diet of humans and their interactions influence, among other things, the texture, flavor, and bioaccessibility of food. There are two types of interactions between them: non-covalent interactions and covalent interactions, the latter being irreversible and more powerful. In this review, we systematically summarized advances in the investigation of possible mechanism underlying covalent polyphenols-proteins interaction in food processing, effect of different processing methods on covalent interaction, methods for characterizing covalent complexes, and impacts of covalent interactions on protein structure, function and nutritional value, as well as potential bioavailability of polyphenols. In terms of health promotion of the prepared covalent complexes, health effects such as antioxidant, hypoglycemic, regulation of intestinal microbiota and regulation of allergic reactions have been summarized. Also, the possible applications in food industry, especially as foaming agents, emulsifiers and nanomaterials have also been discussed. In order to offer directions for novel research on their interactions in food systems, nutritional value, and health properties in vivo, we considered the present challenges and future perspectives of the topic.

Casein-based conjugates and graft copolymers. Synthesis, properties, and applications

Biobased natural polymers, including polymers of natural origin such as casein, are growing rapidly in the light of the environmental pollution caused by many mass-produced commercial synthetic polymers. Although casein has interesting intrinsic properties, especially for the food industry, numerous chemical reactions have been carried out to broaden the range of its properties, most of them preserving casein's nontoxicity and biodegradability. New conjugates and graft copolymers have been developed especially by Maillard reaction of the amine functions of the casein backbone with the aldehyde functions of sugars, polysaccharides, or other molecules. Carried out with dialdehydes, these reactions lead to the cross-linking of casein giving three-dimensional polymers. Acylation and polymerization of various monomers initiated by amine functions are also described. Other reactions, far less numerous, involve alcohol and carboxylic acid functions in casein. This review provides an overview of casein-based conjugates and graft copolymers, their properties, and potential applications.

Changes in emulsifying properties of caseinate-Soy soluble polysaccharides conjugates by ultrasonication

This research aimed to assess the impact of ultrasonication on the emulsifying ability of a conjugate system composed of sodium caseinate and soluble soy polysaccharides. The study analyzed the characteristics of the particles and evaluated the emulsions produced using nanoconjugates. The results showed that ultrasonication improved the contact angle (63.7°) and decreased particle size (75 nm), resulting in more effective emulsifying efficiency. At a 2 % concentration of the nanoconjugates, stable emulsions with a 50 % oil content were successfully formed through complete coverage of the droplets' surface, and no oil release was observed. Moreover, the emulsions' creaming index remained below 25 % even after 60 days of storage. The stability of the nanoconjugate-based emulsions depended on the concentration of nanoconjugates, with an optimal concentration of 4 %. These findings suggest that the nanoconjugates have great potential as a natural stabilizer for emulsion-based products.

Improvements of Solubility and Bioavailability of Lutein Through Grafting with Hydrophilic Polyacrylic Acid

In this study, polyacrylic acid grafted lutein (PAA-g-lutein) was prepared by hydrophilic modification of lutein with polyacrylic acid (PAA) through Steglish esterification method. The unreacted lutein was loaded in micelles formed by self-assembly of graft copolymers in water to form composite nanoparticles. The bioaccessibility and bioavailability of lutein nanoparticles were studied by in vitro and in vivo digestion experiments. Compared with free lutein, the saturated solubility and bioaccessibility of lutein nanoparticles were increased by 78 times and 3.6 times, respectively. The pharmacokinetics results in the mice model showed that the maximum concentration (Cmax) and area under concentration-time curve (AUC) of plasma of mice were increased by 3.05 and 6.07 times with lutein nanoparticles compared with free lutein. Meanwhile, the prepared lutein nanoparticles also promoted the accumulation of lutein in the liver, mesenteric adipose, and eyeballs. These results indicate that graft copolymerization of lutein with water-soluble polymers to form nanoparticles is an effective method to promote the bioavailability of lutein in vivo. Moreover, this method is simple and applicable, and can also be used for the modification of other bioactive molecules.

Combination modes impact on the stability of β-carotene-loaded emulsion constructed by soy protein isolate, β-glucan and myricetin ternary complex

A β-carotene rich emulsion with improved physical and chemical stability was obtained in this study, using different types of protein-polysaccharide-polyphenol ternary complexes as novel emulsifiers. The ternary complexes were prepared by covalent or non-covalent binding of soy protein isolate (SPI), β-glucan (DG) and myricetin (MC), which were evidenced to be stable. It was indicated that the emulsion stabilized by covalent complex of SPI, DG and MC, exhibited higher zeta-potential and smaller particle size than those stabilized by non-covalent complex. Furthermore, the covalent complexes prepared from different addition sequences showed different efficiencies in stabilizing the emulsion, in which SPI-DG-MC and SPI-MC-DG-stabilized emulsions possess better stability, emulsifying activity and storage resistance under adverse environmental treatment, with CI values of 62.7% and 64.3% after 25 days, respectively. According to oxidative stability and rheology analysis of the emulsions, it was found that the SPI-MC-DG complex prepared at the ratio of 4:2:1 was more stable with relatively less lipid oxidation products and a tighter stacking structure, and the final LH value was 39.98 mmol/L and the MDA value was 6.34 mmol/L. These findings implied that the ternary complex has the potential to deliver fat-soluble active ingredient by means of emulsion, but which depends on the mode and sequence of the molecular interactions.

Polysaccharide-addition order regulates sonicated egg white peptide stabilized nanoemulsions and β-carotene digestion in vitro

In this paper, the effects of the polysaccharide-addition order (before and after homogenisation) on the stability of nanoemulsion stabilised by sonicated egg white peptides and the in vitro digestive behaviour of loaded β-carotene were investigated. The pyrene fluorescence results showed that the concentration of micelles formed by flaxseed gum (FG) in complex with peptides was significantly higher than that of peach gum (PG). The order of polysaccharide-addition affected the emulsion properties and stability; adding polysaccharides before homogenisation led to protein bridging flocculation, low polysaccharide coverage and a higher interfacial adsorbed protein content of the emulsion. PG enhanced potential spatial resistance and electrostatic repulsion, effectively prevented emulsion flocculation and improved electrostatic stability. After homogenisation, FG was added to emulsions to improve environmental stability, including ionic, temperature and storage stability. Due to the viscosity of polysaccharides and the formed polysaccharide-protein-lipid aggregates, the increasing degree of bridging flocculation promoted the prominent of apparent viscosity, and the G' and G'' exhibited a frequency-dependent increase. The polysaccharide type and mode changed the surface loading charge and droplet interface thickness, delayed the destruction of the droplet structure by protease, and slowed the release of β-carotene to form micelles. In this study, a stable emulsion system and an efficient emulsion transport system for bioactive substances were obtained by regulating polysaccharides adding order, which is significant for constructing an efficient food emulsion delivery system.

Behavior of protein-polysaccharide conjugate-stabilized food emulsions under various destabilization conditions

The sensitivity of protein-stabilized emulsions to flocculation, coalescence, and phase separation under destabilization conditions (i.e., heating, aging, pH, ionic strength, and freeze-thawing) may limit the widespread use of proteins as effective emulsifiers. Therefore, there is a great interest in modulating and improving the technological functionality of food proteins by conjugating them with polysaccharides, through the Maillard reaction. The present review article highlights the current approaches of protein-polysaccharide conjugate formation, their interfacial properties, and the behavior of protein-polysaccharide conjugate stabilized emulsions under various destabilization conditions, including long-term storage, heating and freeze-thawing treatments, acidic conditions, high ionic strength, and oxidation. Protein-polysaccharide conjugates are capable of forming a thick and cohesive macromolecular layer around oil droplets in food emulsions and stabilizing them against flocculation and coalescence under unfavorable conditions, through steric and electrostatic repulsion. The protein-polysaccharide conjugates could be therefore industrially used to design emulsion-based functional foods with high physicochemical stability.

Protein-polysaccharide nanoconjugates: Potential tools for delivery of plant-derived nutraceuticals

Protein-polysaccharide nanoconjugates are covalently interactive networks that are currently the subject of intense research owing to their emerging applications in the food nanotechnology field. Due to their biocompatibility and biodegradability properties, they have played a significant role as wall materials for the formation of various nanostructures to encapsulate nutraceuticals. The food-grade protein-polysaccharide nanoconjugates would be employed to enhance the delivery and stability of nutraceuticals for their real use in the food industry. The most common edible polysaccharides (cellulose, chitosan, pectin, starch, carrageenan, fucoidan, mannan, glucomannan, and arabic gum) and proteins (silk fibroin, collagen, gelatin, soy protein, corn zein, and wheat gluten) have been used as potential building blocks in nano-encapsulation systems because of their excellent physicochemical properties. This article broadens the discussion of food-grade proteins and polysaccharides as nano-encapsulation biomaterials and their fabrication methods, along with a review of the applications of protein-polysaccharide nanoconjugates in the delivery of plant-derived nutraceuticals.

Enhancing the stability of lutein emulsions with a water-soluble antioxidant and a oil-soluble antioxidant

Lutein is critical for protecting the eye against light damage. The low solubility and high sensitivity of lutein to environmental stresses prevent its further application. The hypothesis is that the combination of one water-soluble antioxidant and one oil-soluble antioxidant will be beneficial to improve the stability of lutein emulsions. A low-energy method was performed to prepare lutein emulsions. The combination of a lipid-soluble antioxidant (propyl gallate or ethylenediaminetetraacetic acid) and a water-soluble antioxidant (tea polyphenol or ascobic acid) were investigated for improving the lutein retention rates. It was shown that the highest lutein retention rate was achieved by using propyl gallate and tea polyphenol, 92.57%, at Day 7. It was proven that the lutein retention rates of emulsions with propyl gallate and tea polyphenol were 89.8%, 73.5% and 55.2% at 4 °C, 25 °C and 37 °C, respectively, at Day 28. The current study is helpful to prepare for the further application of lutein emulsions for ocular delivery.

Food protein glycation: A review focusing on stability and in vitro digestive characteristics of oil/water emulsions

Recently, increasing studies have shown that the functional properties of proteins, including emulsifying properties, antioxidant properties, solubility, and thermal stability, can be improved through glycation reaction under controlled reaction conditions. The use of glycated proteins to stabilize hydrophobic active substances and to explore the gastrointestinal fate of the stabilized hydrophobic substances has also become the hot spot. Therefore, in this review, the effects of glycation on the structure and function of food proteins and the physical stability and oxidative stability of protein-stabilized oil/water emulsions were comprehensively summarized and discussed. Also, this review sheds lights on the in vitro digestion characteristics and edible safety of emulsion stabilized by glycated protein. It can further serve as a research basis for understanding the role of structural features in the emulsification and stabilization of glycated proteins, as well as their utilization as emulsifiers in the food industry.

Oxidative stability of lutein on exposure to varied extrinsic factors

Pre-processing treatments performed on lutein sources can cause it to degrade, generating superfluous metabolites and lowering lutein's bioactivity. However, evidences suggesting extent of reduction in functional stability of lutein on exposure to such treatment conditions are nil. This study is first of its kind, where we attempted to gain clarity on the extent of degradation caused by the changes in temperature (40-100 °C), pH (2-8) and duration of such treatments. Increase (3.9 folds) in lutein loss within an hour at 40 °C occurred when pH was lowered from 8 to 2. Increase (1.7 folds) in lutein loss at neutral pH and 40 °C occurred when duration of exposure was increased from 1 to 4 h. Besides, lutein loss significantly increased on rising the temperature by every 10 °C. The functional stability of lutein in relation to its degradation was also studied by monitoring its radical scavenging activity. While lutein is highly unstable, lutein structure and its respective bioactivity can be significantly (p < 0.05) retained (< 12.44% and > 54.87% respectively) by maintaining the operating conditions at higher pH (7-8) and lower temperatures (40-50 °C) for a short period of time (< 1 h).

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05430-3.

Enhancement of pea protein solubility and thermal stability for acidic beverage applications via endogenous Maillard-induced glycation and chromatography purification

A clean-label process to endogenously glycate and purify pea protein was investigated. The production of maltodextrin from pea starch with a specific dextrose equivalent (DE) was optimized. The produced maltodextrin (14.6 DE) was used to initiate a limited and controlled Maillard-induced glycation of pea protein. The partially glycated pea protein (PG-PP) was subjected to hydrophobic interaction chromatography to remove unreacted carbohydrate, followed by characterization of the purified product. The extent of Maillard-induced glycation was monitored by assessing changes in color, free amino groups, and protein/glycoprotein profiles. The purified PG-PP was evaluated for thermal denaturation, surface properties, protein secondary structure, protein solubility, thermal stability, and digestibility. Maillard-induced glycation was limited to initial stages and resulted in a moderate blockage of amine groups (∼30%). The purified PG-PP had a relatively low surface hydrophobicity, a markedly enhanced protein solubility (∼90%) at pH 3.4, and a nonimpacted protein in vitro digestibility (∼100%). This work provided the impetus needed for future scale-up and process optimization for the production of value-added pea protein ingredient intended for high protein beverage applications.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Improved physicochemical stability and bioaccessibility of astaxanthin-loaded oil-in-water emulsions by a casein-caffeic acid-glucose ternary conjugate

In this study, the influence of casein-caffeic acid-glucose ternary conjugate (CSC) on the physicochemical properties and bioaccessibility of astaxanthin-loaded emulsion was investigated and compared with sodium caseinate (CSN), a synthetic emulsifier commonly used in the food industry. The CSC-stabilized emulsion exhibits droplet characteristics similar to CSN-stabilized emulsion, and can effectively resist the external forces that lead to the phase separation of the emulsion. Although phase separation also occurred at pH 4.0, CSC emulsion had a wider range of pH stability (pH 3.0, 5.0-8.0) and higher salt ion stability than CSN emulsion. Furthermore, CSC-stabilized astaxanthin emulsions showed better astaxanthin protection under different heat treatment conditions and storage temperatures compared with CSN. After 28 days of storage at 4 °C, astaxanthin residues in the CSC-stabilized emulsion reached 92.37 %. The bioaccessibility of astaxanthin in CSC-stabilized emulsion was 26.21 %, much higher than that in CSN (6.47 %). This research study provides a platform for designing astaxanthin-fortified food or beverage systems to achieve better stability and delivery to target sites.

Improved Light and In Vitro Digestive Stability of Lutein-Loaded Nanoparticles Based on Soy Protein Hydrolysates via Pepsin

In order to improve the water solubility and stability of lutein, soy protein isolates (SPI) and their hydrolysates via pepsin (PSPI) and alcalase (ASPI) were used as nanocarriers for lutein to fabricate the lutein-loaded nanoparticles (LNPS) of SPI, PSPI, and ASPI. The encapsulation properties, light, and in vitro digestive stability of lutein in nanoparticles, and protein-lutein interactions were investigated. Compared with SPI-LNPS and ASPI-LNPS, PSPI-LNPS was characterized by uniform morphology (approximately 115 nm) with a lower polydispersity index (approximately 0.11) and higher lutein loading capacity (17.96 μg/mg protein). In addition, PSPI-LNPS presented the higher lutein retention rate after light exposure (85.05%) and simulated digestion (77.73%) than the unencapsulated lutein and SPI-LNPS. Fluorescence spectroscopy revealed that PSPI had stronger hydrophobic interaction with lutein than SPI, which positively correlated with their beneficial effects on the light and digestive stability of lutein. This study demonstrated that PSPI possessed significant potential for lutein delivery.

Structure and stability characterization of pea protein isolate-xylan conjugate-stabilized nanoemulsions prepared using ultrasound homogenization

Preparation of pea protein isolate-xylan (PPI-X) conjugate-stabilized nanoemulsions using ultrasonic homogenization and the corresponding structure and environmental stability were investigated in this study. Conditions used to prepare nanoemulsions were optimized using a response surface methodology as follows: protein concentration 8.86 mg/mL, ultrasound amplitudes 57 % (370.5 W), and ultrasound time 16 min. PPI-X conjugate-stabilized nanoemulsions formed under these conditions exhibited less mean droplet size (189.4 ± 0.45 nm), more uniform droplet distribution, greater absolute value of zeta-potential (44.8 ± 0.22 mV), and higher protein adsorption content compared with PPI-stabilized nanoemulsions. PPI-X conjugate-stabilized nanoemulsions also exhibited even particle distribution and dense network structure, which might be reasons for the observed high interfacial protein adsorption content of conjugate-stabilized nanoemulsions. Moreover, better stability against environmental stresses, such as thermal treatment, freeze-thaw treatment, ionic strength and type, and storage time was also observed for the conjugate-stabilized nanoemulsions, indicating that this type of nanoemulsions possess a potential to endure harsh food processing conditions. Therefore, results provide a novel approach for the preparation of protein-polysaccharide conjugate-stabilized nanoemulsions to be applied as novel ingredients to meet special requirements of processed foods.

Improved retention ratio and bioaccessibility of lutein loaded in emulsions stabilized by egg yolk granules-lecithin complex

BACKGROUND

Egg yolk granules (EYGs)-soy lecithin (SL) complex is a newly developed delivery system that is effective for improving the storage stability of hydrophobic bioactive compounds. However, the formation mechanism of EYGs and SL complex and its effect on the gastrointestinal fate of lutein-loaded emulsions needs to be investigated further.

RESULTS

Adding SL greatly improved the surface activity of the EYGs, as evidenced by reduced surface tension and an increased adsorption rate to the oil/water interface. Hydrophobic interaction was the dominant force in the formation of EYG-SL complex, with hydrogen and ionic bonds playing complementary roles. Using the EYG-SL complex, stable oil-in-water emulsions were formed and exhibited an enhanced retention ratio and bioaccessibility of lutein after simulated digestion. Correlation analysis demonstrated that the additional anti-oxidant activity as a result of EYGs was responsible for the high retention of lutein, whereas low surface tension facilitated the micellization of bioaccessible lutein.

CONCLUSION

The present study shows that the EYG and SL have a synergistic effect with respect to improving the retention ratio and bioaccessibility of lutein in emulsions stabilized by EYG-SL complex after digestion and this will guide the development of value-added oil-in-water emulsion products using protein-lecithin complex as a promising nutrient delivery vehicle. © 2022 Society of Chemical Industry.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Fabrication and characterization of a cannabidiol-loaded emulsion stabilized by a whey protein-maltodextrin conjugate and rosmarinic acid complex

A cannabidiol (CBD)-loaded oil-in-water emulsion stabilized by a whey protein (WP)-maltodextrin (MD) conjugate and rosmarinic acid (RA) complex was fabricated, and its stability characteristics were investigated under various environmental conditions. The WP-MD conjugates were formed via dry-heating. The interaction between WP and MD was assessed by browning intensity, reduced amount of free amino groups, the formation of high molecular weight components in sodium dodecyl sulfate-PAGE, and changes in secondary structure of whey proteins. The WP-MD-RA noncovalent complex was prepared and confirmed by fluorescence quenching and Fourier-transform infrared spectroscopy spectra. Emulsions stabilized by WP, WP-MD, and WP-RA were used as references to evaluate the effect of WP-MD-RA as a novel emulsifier. Results showed that WP-MD-RA was an effective emulsifier to produce fine droplets for a CBD-loaded emulsion and remarkably improved the pH and salt stabilities of emulsions in comparison with WP. An emulsion prepared with WP-MD-RA showed the highest protection of CBD against UV and heat-induced degradation among all emulsions. The ternary complex kept emulsions in small particle size during storage at 4°C. Data from the current study may offer useful information for designing emulsion-based delivery systems which can protect active substance against environmental stresses.

Improving the emulsifying properties of sodium caseinate through conjugation with soybean soluble polysaccharides

This study was conducted to investigate the impact on the techno-functionality over sodium caseinate (NaCS) when are conjugated with soluble soybean polysaccharides (SSPS). NaCS/SSPS conjugates were prepared through the Maillard reaction using dry heating. The formation of covalent binding between NaCS and SSPS and structural changes of NaCS during glycation were confirmed via SDS-PAGE and ATR-FTIR. A positive correlation was observed between the increase in the browning index of samples and Amadori compounds formation over time, based on the colorimetric results. Emulsions stabilization using conjugates with a higher NaCS/SSPS ratio led to a decreasing trend in the droplets' size and creaming index. Meanwhile, higher viscosity and shear-thinning behavior were observed in conjugate-based emulsions. Finally, conjugates prepared with the NaCS/SSPS ratio of 9/1 at an incubation time of 24 h presented a higher pH and thermal stability and better performance in emulsion stabilization in comparison with each of the biopolymers alone.

Effect of chitosan oligosaccharide glycosylation on the emulsifying property of lactoferrin

There is fast increasing interest in the development of alimentary protein stabilized emulsions due to their potential applications in functional food fields. This work studied the effect of glycation degree with chitosan oligosaccharide (COS) on the emulsifying properties of lactoferrin (LF) through Maillard reaction. In the present study, SDS-PAGE and FT-IR were used to confirm LF and COS covalently binding together successfully. Intrinsic fluorescence showed that glycation with COS led more hydrophobic groups exposed to the surface of the structure and particle size increase of LF. Emulsions with 50% (v/v) oil phase and protein concentration of 2% (w/v) was fabricated through one-step shear method. Compared with native LF, emulsions stabilized by LF-COS conjugates showed smaller droplet size and lower creaming index (CI). Among these samples, LF-COS conjugates under 4 h had the best emulsifying efficiency and stability, the emulsion droplet size and the CI of which decreased 39.66% and 28.55% compared with LF, respectively. Furthermore, glycation with COS enhanced the interfacial activity of LF leading to more adsorbing amount and forming thicker layer on the droplets and gel network in the emulsions. This finding would make sense to further understand the modification of emulsifying properties of alimentary proteins through glycosylation with saccharides and develop novel protein-based emulsifiers.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Effect of the emulsifier type on the physicochemical stability and in vitro digestibility of a lutein/zeaxanthin-enriched emulsion

Lutein (L) and zeaxanthin (Z), as macular pigments, are water-insoluble, chemically unstable, and have low bioaccessibilities; they are often emulsified to overcome these limitations. This study investigated the impact of various emulsifiers (ethyl lauroyl arginate (LAE); Tween 80; and sodium dodecyl sulfate (SDS)) on the physicochemical properties and in vitro digestibilities of L/Z-fortified oil-in-water emulsions. Droplet aggregation and creaming extents were dependent on the emulsifier type. The ζ-potentials of emulsions stabilized by LAE, Tween 80, and SDS were + 87, - 26, and - 95 mV, respectively. SDS-stabilized emulsion had the smallest particles, while the particle sizes for the LAE- and Tween 80-stabilized emulsions were larger and not significantly different. The rates of L/Z degradation were sensitive to the emulsifier type and to heat, not to light. The L/Z bioaccessibility was the highest for the Tween 80 emulsion. Surfactants should therefore be carefully selected to optimize L/Z physicochemical stability and bioaccessibility in emulsions.

Enhancing bioaccessibility and bioavailability of carotenoids using emulsion-based delivery systems

The consumption of foods rich in antioxidants, vitamins, minerals including carotenoids etc. can boost the immune system to help fight off various infections including SARS- CoV 2 and other viruses. Carotenoids have been gaining attention particularly in food and pharmaceutical industries owing to their diverse functions including their role as pro-vitamin A activity, potent antioxidant properties, and quenching of reactive oxygen (ROS), such as singlet oxygen and lipid peroxides within the lipid bilayer of the cell membrane. Nevertheless, carotenoids being lipophilic, have poor solubility in aqueous medium and are also chemically instable. They are susceptible to degrade under stimuli environmental conditions during food processing, storage and gastrointestinal passage. They also exhibit poor oral bioavailability, thus, their applications in aqueous-based foods are limited. As a consequent, suitable delivery systems including colloids-based are needed to enhance the solubility, stability and bioavailability of carotenoids. This review presents challenges of incorporation and delivery of carotenoids focusing on stability and factors affecting bioavailability. Furthermore, designed factors impacting bioaccessibility and bioavailability of carotenoids using emulsion-based delivery systems are explicitly explained. Each delivery system exhibits its own advantages and disadvantages; thus, the delivery systems should be designed based on their targets and their further applications.

Stability and bioaccessibility improvement of capsorubin using bovine serum albumin-dextran-gallic acid and sodium alginate

This study attempted to prepare ternary conjugate emulsion from bovine serum albumin (BSA), dextran (DEX) and gallic acid (GA) to improve the stability of conjugate emulsion and the bioaccessibility of capsorubin. The release of capsorubin was further delayed by sodium alginate capsules in the intestinal phase. First, protein formed new functional groups and covalent bonds was analyzed by Fourier transform infrared (FTIR) and sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE). Next, the stability of the ternary conjugate showed distinct pH correlation and the higher stability near the isoelectric point. Finally, the bioaccessibility of capsorubin embedded in sodium alginate emulsion was higher than that of ternary conjugate emulsion (65% and 34%).

Recent Advances on Nanoparticle Based Strategies for Improving Carotenoid Stability and Biological Activity

Carotenoids are natural pigments widely used in food industries due to their health-promoting properties. However, the presence of long-chain conjugated double bonds are responsible for chemical instability, poor water solubility, low bioavailability and high susceptibility to oxidation. The application of a nanoencapsulation technique has thus become a vital means to enhance stability of carotenoids under physiological conditions due to their small particle size, high aqueous solubility and improved bioavailability. This review intends to overview the advances in preparation, characterization, biocompatibility and application of nanocarotenoids reported in research/review papers published in peer-reviewed journals over the last five years. More specifically, nanocarotenoids were prepared from both carotenoid extracts and standards by employing various preparation techniques to yield different nanostructures including nanoemulsions, nanoliposomes, polymeric/biopolymeric nanoparticles, solid lipid nanoparticles, nanostructured lipid nanoparticles, supercritical fluid-based nanoparticles and metal/metal oxide nanoparticles. Stability studies involved evaluation of physical stability and/or chemical stability under different storage conditions and heating temperatures for varied lengths of time, while the release behavior and bioaccessibility were determined by various in vitro digestion and absorption models as well as bioavailability through elucidating pharmacokinetics in an animal model. Moreover, application of nanocarotenoids for various biological applications including antioxidant, anticancer, antibacterial, antiaging, cosmetics, diabetic wound healing and hepatic steatosis were summarized.

In Vitro Gastrointestinal Stability of Lipophilic Polyphenols is Dependent on their Oil-Water Partitioning in Emulsions: Studies on Curcumin, Resveratrol, and Quercetin

Many lipophilic polyphenols have low bioavailability because of their poor solubility and chemical stability within the human gut. The encapsulation of these polyphenols within digestible lipid droplets can improve their solubility and stability. However, there is currently a poor understanding of how the molecular and physicochemical properties of specific polyphenols impact these characteristics. In this study, the factors influencing the solubility and stability of different polyphenols (curcumin, resveratrol, and quercetin) under simulated gastrointestinal conditions were examined when they were delivered in the form of soybean oil-in-water nanoemulsions containing quillaja saponin-coated droplets (d₃₂ ≈ 0.15 μm; ζ = -63 mV; pH 5). The polyphenols were loaded into the lipid droplets using a pH-driven method, which is based on the pH-dependent electrical charge, oil-water partitioning, and water-solubility of these molecules. The encapsulation efficiency of all three polyphenols was relatively high (75-87%). However, their chemical stability under gastrointestinal conditions (i.e., the % remaining after exposure to gastrointestinal conditions) differed considerably: quercetin (44%), curcumin (92%), and resveratrol (100%). This effect was mainly attributed to the lower logD value of quercetin (2.17) than those of resveratrol (3.39) and curcumin (4.12). As a result, a high fraction (>50%) of quercetin was located within the aqueous gastrointestinal fluids, where it would be more prone to chemical degradation or precipitation. The fraction of the polyphenols solubilized in the gastrointestinal fluids (bioaccessibility) followed a different trend: curcumin (57%) < quercetin (73%) < resveratrol (76%). This effect was attributed to the chemical instability and/or binding of curcumin with other molecules in the simulated intestinal conditions. These results provide useful information for designing nanoemulsion-based delivery systems to improve the efficacy of lipophilic polyphenols.

Physicochemical stability and gastrointestinal fate of β-carotene-loaded oil-in-water emulsions stabilized by whey protein isolate-low acyl gellan gum conjugates

This study aimed to examine the effect of whey protein isolate-low acyl gellan gum (WPI-GG) conjugate on the physicochemical properties and digestibility of β-carotene-loaded oil-in-water emulsions. The WPI-GG conjugate-stabilized emulsions had lower droplet sizes with more homogenous distribution, more negative surface charge, and higher interfacial protein concentration and viscosity, compared to those stabilized by WPI-GG mixture and WPI. The emulsion droplets coated by the conjugate were also generally more stable to environmental stresses (i.e., storage, pH changes, ionic strength, freeze-thaw cycles, and thermal treatment) along with higher β-carotene retention than other systems. The stability to droplet aggregation during in vitro digestion was remarkably increased for the conjugate-stabilized emulsion. However, the β-carotene bioaccessibility was significantly affected when the conjugate was used to stabilize the emulsions, likely due to the thick interfacial layer, high viscosity, and negative charge of the corresponding emulsions that could inhibit droplet digestion and mixed micelle formation.

Advances in edible nanoemulsions: Digestion, bioavailability, and potential toxicity

The design, fabrication, and application of edible nanoemulsions for the encapsulation and delivery of bioactive agents has been a highly active research field over the past decade or so. In particular, they have been widely used for the encapsulation and delivery of hydrophobic bioactive substances, such as hydrophobic drugs, lipids, vitamins, and phytochemicals. A great deal of progress has been made in creating stable edible nanoemulsions that can increase the stability and efficacy of these bioactive agents. This article highlights some of the most important recent advances within this area, including increasing the water-dispersibility of bioactives, protecting bioactives from chemical degradation during storage, increasing the bioavailability of bioactives after ingestion, and targeting the release of bioactives within the gastrointestinal tract. Moreover, it highlights progress that is being made in creating plant-based edible nanoemulsions. Finally, the potential toxicity of edible nanoemulsions is considered.