Interfacial and emulsifying properties of citrus pectin: Interaction of pH, ionic strength and degree of esterification

Assessing high-temperature and pressure extraction of bioactive water-soluble polysaccharides from passion fruit mesocarp

The mesocarp (albedo) of passion fruit is considered a waste product but rich in soluble fibers, especially pectins. Biological activity and health benefits of pectins have recently emerged, especially in colorectal cancer and attenuating inflammation. Pectin conventional extraction often uses mineral acids, which can be hazardous to the environment, and alternatives can be costly. Here, we assessed a high-temperature and pressure method to extract pectin from the passion fruit albedo and evaluated the differences from the water-soluble fractions extracted. HPSEC, HPAEC, FTIR-ATR, and HSQC-NMR were performed to identify and confirm the highly methylated homogalacturonan structures. The heat-modified samples showed a decreased molecular size compared to the untreated sample. Colorectal cancer cell lines showed reduced viability after being treated with different doses of modified samples, with two of them, LW-MP3 and 4, showing the most potent effects. All samples were detected inside cells by immunofluorescence assay. It was observed that LW-MP3 and 4 upregulated the p53 protein, indicating cell-cycle arrest and the cleaved caspase-9 in one of the cell lines, with LW-MP4 enhancing cell death by apoptosis. Since the modified samples were composed of hydrolyzed homogalacturonans, those probably were the responsible structures for these anti-cancer effects.

Chemical characterization-function relationship of pectins from persimmon fruit within different ripeness

This study investigated the structural and functional characteristics of two different molecular weight persimmon pectin extracted from unripe persimmon (PP-1) and ripe persimmon (PP-2). The molecular weight was determined as 117.8 kDa and 61.3 kDa for PP-1 and PP-2, which consisting of glucose, rhamnose, mannose, galactose, and xylose. AFM results indicated PP-1 with many linear chains, and short chains in while short chains, branching points, and heterogeneous clumps were found in PP-2.Emulsion characterization and storage stability experiments revealed that PP-1 with more stable emulsifying properties than PP-2 and commercial citrus pectin. In vitro fermentation of PP-1 and PP-2 by gut microbiota indicated that PP-1 and PP-2 groups were higher than inulin group in total SCFAs production after 48 h of fermentation. This study provided useful information for high value utilization of persimmon pectin.

Food gels: principles, interaction mechanisms and its microstructure

Food hydrogels are important materials having great scientific interest due to biocompatibility, safety and environment-friendly characteristics. In the food industry, hydrogels are widely used due to their three-dimensional crosslinked networks. Furthermore, they have attracted great attention due to their wide range of applications in the food industry, such as fat replacers, encapsulating agents, target delivery vehicles, and many more. In addition to basic and recent knowledge on food hydrogels, this review exclusively focuses on sensorial perceptions, nutritional significance, body interactions, network structures, mechanical properties, and potential hydrogel applications in food and food-based matrices. Additionally, this review highlights the structural design of hydrogels, which provide the forward-looking idea for future applications of food hydrogels (e.g., 3D or 4D printing).

Construction of curcumin-fortified juices using their self-derived extracellular vesicles as natural delivery systems: grape, tomato, and orange juices

Different fruit and vegetable juices were first used to encapsulate curcumin to improve its solubility, stability, and bioaccessibility, which is expected to enable designing of polyphenol-enriched beverages and impact human health and well-being. Briefly, fruit and vegetable-derived extracellular vesicles usually serve as transport and communication tools between different cells, which means they also may be utilized as delivery carriers for other bioactive agents. Curcumin, as a model polyphenol with many physiological activities, typically has low water-solubility, stability, and bioaccessibility. Therefore, extracellular vesicles were applied to load curcumin to overcome these challenges and to facilitate its incorporation into fruit and vegetable juices. Three kinds of curcumin-loaded fruit and vegetable juices, including curcumin-loaded grape (Cur-G), tomato (Cur-T), and orange (Cur-O) juices, exhibited higher encapsulation efficiency (>80%) than others. The patterns of XRD and FTIR confirmed that curcumin moved into extracellular vesicles in the amorphous form and that the hydrogen bonding force was found between them. Three kinds of fruit and vegetable juices can significantly enhance the solubility, stability and bioavailability of curcumin, but the degrees of improvement are different. For instance, Cur-O exhibited the highest encapsulation efficiency, chemical stability, and effective bioaccessibility than Cur-G and Cur-T. In summary, this study shows that natural fruit and vegetable juices can effectively improve the solubility, stability and bioaccessibility of active polyphenols, which is expected to enable successful designing of nutrient-enriched beverages with a simple method according to various needs of people and be directly applied to food processing and home production.

Exploring the effect of utilising organic acid solutions in ultrasound-assisted extraction of pectin from apple pomace, and its potential for biomedical purposes

Biomass resulting from food production represents valuable material to recover different biomolecules. In our study, we used apple pomace to obtain pectin, which is traditionally extracted using mineral acids. Our hypothesis consisted of carrying out extractions with organic acids, assisted by ultrasound, by varying processing parameters including time, temperature, and type of acid. The analytical determinations of galacturonic acid content, methoxylation and esterification degree, ζ-potential and extraction yield were used as pectin quality indicators. Pectins extracted using treatment conditions with better performance were assessed biologically in vitro for their potential to be used in biomedical applications. Overall, the extracted pectin presented a galacturonic acid content, methoxylation and esterification degree ranged from 19.7 to 67%, 26.8-41.4% and 58-65.2% respectively, and were negatively charged (-24.1 to -13.2 mV). It was found that factors of time and temperature greatly influenced the response variables excepting the esterification degree, while the acid type influenced the ζ-potential, methoxylation and esterification degrees. Additionally, it was seen that the longer extraction time (50 min) and higher temperature (50 °C) exhibited the better extraction yield (∼10.9%). Finally, the selected pectin showed high cytocompatibility up to 500 μg/mL of concentration when seeded with Neonatal Normal Human Dermal Fibroblasts.

Antioxidant activity and semi-solid emulsification of a polysaccharide from coffee cherry peel

In order to further improve the economic benefits of the coffee industry chain, we carried out the following systematic research on processing by-products. In this research, the obtained coffee cherry peel polysaccharide (CCP) which was removed from the coffee cherry peel by hot acid method had a galacturonic acid content of 20.50 % and a molecular weight of 3.05 kg/mol. According to the results of monosaccharide analysis, Fourier transform infrared spectroscopy, molecular weight distribution, and thermal analysis, CCP was a typical high methoxy polysaccharide. In vitro antioxidant results showed that CCP had better antioxidant capacity than commercial citrus polysaccharide (APC). When it came to emulsification performance, the water-oil bonding ability and disturbance resistance to the fluid of CCP were also significantly higher than that of APC. Specially, we found that 0.50 % (wt%) CCP could form a solid-liquid gel with very high plasticity at low oil phase fraction. In conclusion, the coffee cherry peel could be used as a natural source of a novel emulsifier, providing a promising alternative for polysaccharide in the food industry.

Pectin-like polysaccharide extracted from leaves Crataeva tapia promotes antioxidant, immunomodulatory and emulsifiers applied in therapeutic formulations

The objective of this work was to isolate a polysaccharide similar to pectin from Crataeva tapia leaves, not yet reported in the literature, and to evaluate its antioxidant, cytotoxic and immunomodulatory profile. Pectin was extracted from the leaves in three stages, organic solvent followed by acidified water and ethanol precipitation. With the pectin obtained, the physicochemical characterization of the molecule was carried out using high-performance liquid chromatography, Fourier-transform infrared spectroscopy, nuclear magnetic resonance (13C and 1H) and different thermal and elemental analysis. Furthermore, the antioxidant activities were evaluated in vitro, and using human peripheral blood mononuclear cell culture, cytotoxicity and immunostimulatory actions were investigated. Physical and chemical analyses showed characteristic signs of pectin. Antioxidant activity tests showed that pectin had moderate to low antioxidant activity. Furthermore, pectin did not affect the viability of erythrocytes and PBMC and induced an immunostimulatory state when it promoted the production of cytokines IL-6, IL-10 and TNF-α and increased the activation of CD8 + T lymphocytes. This study showed that pectin from Crataeva tapia is not cytotoxic and promoted a pro-inflammatory profile in peripheral blood mononuclear cell with application as an immunostimulating and emulsifying compound.

Effect of a Change in the CaCl2/Pectin Mass Ratio on the Particle Size, Rheology and Physical Stability of Lemon Essential Oil/W Emulgels

A three-step (rotor-stator-microfluidization-rotor stator) protocol was used to prepare 15% lemon essential oil in water emulgels using a mixture of Tween 80 and Span 20 surfactants as low molecular mass emulsifiers and 0.4% low-methoxyl citrus peel pectin as a gelling agent. Ca2+ was used as a gel-promoting agent. Different CaCl2/pectin mass ratio values from 0.3 to 0.7 were used. Emulgels showed a microstructure consisting of oil droplets embedded in a sheared gel matrix, as demonstrated by bright field optical microscopy. Laser diffraction tests showed multimodal particle size distributions due to the coexistence of oil droplets and gel-like particles. Multiple light scattering tests revealed that the physical stability of emulgels was longer as the CaCl2/pectin mass ratio decreased and that different destabilization mechanisms took place. Thus, incipient syneresis became more important with increasing CaCl2 concentration, but a parallel creaming mechanism was detected for CaCl2/pectin mass ratio values above 0.5. Dynamic viscoelastic and steady shear flow properties of the emulgels with the lowest and highest CaCl2/pectin mass ratio values were compared as a function of aging time. The lowest ratio yielded an emulgel with enhanced connectivity among fluid units as indicated by its wider linear viscoelastic region, higher storage modulus, loss modulus and viscosity values, and more shear thinning properties than those of the emulgel formulated with the highest CaCl2/pectin mass ratio. The evolution of the dynamic viscoelastic properties with aging time was consistent with the information provided by monitoring scans of backscattering as a function of sample height.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

RG-I Domain Matters to the In Vitro Fermentation Characteristics of Pectic Polysaccharides Recycled from Citrus Canning Processing Water

Canned citrus is a major citrus product that is popular around the world. However, the canning process discharges large amounts of high-chemical oxygen demand wastewater, which contains many functional polysaccharides. Herein, we recovered three different pectic polysaccharides from citrus canning processing water and evaluated their prebiotic potential as well as the relationship between the RG-I domain and fermentation characteristics using an in vitro human fecal batch fermentation model. Structural analysis showed a large difference among the three pectic polysaccharides in the proportion of the rhamnogalacturonan-I (RG-I) domain. Additionally, the fermentation results showed that the RG-I domain was significantly related to pectic polysaccharides' fermentation characteristics, especially in terms of short-chain fatty acid generation and modulation of gut microbiota. The pectins with a high proportion of the RG-I domain performed better in acetate, propionate, and butyrate production. It was also found that Bacteroides, Phascolarctobacterium, and Bifidobacterium are the main bacteria participating in their degradation. Furthermore, the relative abundance of Eubacterium_eligens_group and Monoglobus was positively correlated with the proportion of the RG-I domain. This study emphasizes the beneficial effects of pectic polysaccharides recovered from citrus processing and the roles of the RG-I domain in their fermentation characteristics. This study also provides a strategy for food factories to realize green production and value addition.

Extraction of Pectin from Passion Fruit Peel: Composition, Structural Characterization and Emulsion Stability

Extraction methods directly affect pectin extraction yield and physicochemical and structural characteristics. The effects of acid extraction (AE), ultrasonic-assisted acid extraction (UA), steam explosion pretreatment combined with acid extraction (SEA) and ultrasonic-assisted SEA (USEA) on the yield, structure, and properties of passion fruit pectin were studied. The pectin yield of UA was 6.5%, equivalent to that of AE at 60 min (5.3%), but the emulsion stability of UA pectin was poor. The pectin obtained by USEA improved emulsion stability. Compared with UA, it had higher protein content (0.62%), rhamnogalacturonan I (18.44%) and lower molecular weight (0.72 × 10⁵ Da). In addition, SEA and USEA had high pectin extraction yields (9.9% and 10.7%) and the pectin obtained from them had lower degrees of esterification (59.3% and 68.5%), but poor thermal stability. The results showed that ultrasonic-assisted steam explosion pretreatment combined with acid extraction is a high-efficiency and high-yield method. This method obtains pectin with good emulsifying stability from passion fruit peel.

Extraction and characterization of a pectin from sea buckthorn peel

Sea buckthorn peel is the by-product of the sea buckthorn processing, which contains many bioactive compounds. In this paper, sea buckthorn high methoxyl pectin (SBHMP) was obtained, with a yield of 8% and a light-colored. The SBHMP was a high methoxyl with a degree of esterification of 57.75% and uronic acid content of 65.35%. The structural and morphological characterization of SBHMP were analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Results showed that SBHMP presented a sheet and layered stacked morphological, and was mainly composed of galacturonic acid, arabinose, galactose, rhamnose, and mannose, which indicated that SBHMP mainly consisted of homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) type pectin polysaccharides. In addition, SBHMP also presented significant gel, thickening, and emulsifying properties. The results exhibited that SBHMP could form jelly-like gels under acid and high sucrose conditions, presenting a shear-thinning behavior and increasing apparent viscosity with the enhancement of pectin and sucrose contents. Besides, SBHMP could form oil-in-water emulsions with pectin concentrations of 1.0–3.0%. When the SBHMP concentrations were 2.0 and 3.0%, the emulsions were stable during 7 days of storage. Findings in this paper demonstrated the potential of SBHMP to be a food thickener and emulsifier and support the in-depth utilization of sea buckthorn by-products.

Complexation of Anthocyanin-Bound Blackcurrant Pectin and Whey Protein: Effect of pH and Heat Treatment

A complexation study between blackcurrant pectin (BCP) and whey protein (WP) was carried out to investigate the impact of bound anthocyanins on pectin−protein interactions. The effects of pH (3.5 and 4.5), heating (85 °C, 15 min), and heating sequence (mixed-heated or heated-mixed) were studied. The pH influenced the color, turbidity, particle size, and zeta-potential of the mixtures, but its impact was mainly significant when heating was introduced. Heating increased the amount of BCP in the complexes—especially at pH 3.5, where 88% w/w of the initial pectin was found in the sedimented (insoluble) fraction. Based on phase-separation measurements, the mixed-heated system at pH 4.5 displayed greater stability than at pH 3.5. Heating sequence was essential in preventing destabilization of the systems; mixing of components before heating produced a more stable system with small complexes (<300 nm) and relatively low polydispersity. However, heating WP before mixing with BCP prompted protein aggregation—producing large complexes (>400 nm) and worsening the destabilization. Peak shifts and emergence (800−1200 cm−1) in infrared spectra confirmed that BCP and WP functional groups were altered after mixing and heating via electrostatic, hydrophobic, and hydrogen bonding interactions. This study demonstrated that appropriate processing conditions can positively impact anthocyanin-bound pectin−protein interactions.

Dual-Grafting of Microcrystalline Cellulose by Tea Polyphenols and Cationic ε-Polylysine to Tailor a Structured Antimicrobial Soy-Based Emulsion for 3D Printing

An imperative processing way to produce 3D printed structures with enhanced multifunctional properties is printing inks in the form of a gel-like colloidal emulsion. The surface-modified microcrystalline cellulose (MCC) is an excipient of outstanding merit as a particulate emulsifier to manufacture a stable Pickering emulsion gel. The tuning of the MCC structure by cationic antimicrobial compounds, such as ε-polylysine (ε-PL), can offer a surface activity with an antimicrobial effect. However, the MCC/ε-PL lacks the appropriate emulsifying ability due to the development of electrostatic complexes. To overcome this challenge, (i) a surface-active MCC conjugate was synthesized by a sustainable dual-grafting technique (ii) to produce a highly stable therapeutic soy-based Pickering emulsion gel (iii) for potential application in 3D printing. In this regard, the tea polyphenols were initially introduced into MCC by the free-radical grafting method to decrease the charge density of anionic MCC. Then, the antioxidative MCC-g-tea polyphenols were reacted by ε-PL to produce a dual-grafted therapeutic MCC conjugate (micro-biosurfactant), stabilizing the soy-based emulsion system. The results indicated that the dual-grafted micro-biosurfactant formed a viscoelastic and thixotropic soy-based emulsion gel with reduced droplet size and long-term stability. Besides, there was an improvement in the interfacial adsorption features of soy-protein particles after micro-biosurfactant incorporation, where the interfacial pressure and surface dilatational viscoelastic moduli were enhanced. Consequently, it was revealed that the therapeutic Pickering emulsion gel was more suitable to manufacture a well-defined 3D architecture with high resolution and retained permanent deformation after unloading (i.e., a recoverable matrix). This work established that the modification of the MCC backbone by tea polyphenols and ε-PL advances its bioactive properties and emulsifying performance, which finally obtains a soy-based 3D printed structure with noteworthy mechanical strength.

The Complex Biological Effects of Pectin: Galectin-3 Targeting as Potential Human Health Improvement?

Galectin-3 is the only chimeric representative of the galectin family. Although galectin-3 has ubiquitous regulatory and physiological effects, there is a great number of pathological environments where galectin-3 cooperatively participates. Pectin is composed of different chemical structures, such as homogalacturonans, rhamnogalacturonans, and side chains. The study of pectin's major structural aspects is fundamental to predicting the impact of pectin on human health, especially regarding distinct molecular modulation. One of the explored pectin's biological activities is the possible galectin-3 protein regulation. The present review focuses on revealing the structure/function relationship of pectins, their fragments, and their biological effects. The discussion highlighted by this review shows different effects described within in vitro and in vivo experimental models, with interesting and sometimes contradictory results, especially regarding galectin-3 interaction. The review demonstrates that pectins are promissory food-derived molecules for different bioactive functions. However, galectin-3 inhibition by pectin had been stated in literature before, although it is not a fully understood, experimentally convincing, and commonly agreed issue. It is demonstrated that more studies focusing on structural analysis and its relation to the observed beneficial effects, as well as substantial propositions of cause and effect alongside robust data, are needed for different pectin molecules' interactions with galectin-3.

Effect of Conformation of Sugar Beet Pectin on the Interfacial and Emulsifying Properties

The influence of the conformation of sugar beet pectin (SBP) on the interfacial and emulsifying properties was investigated. The colloidal properties of SBP, such as zeta potential and hydrodynamic diameter, were characterized at different pH levels. Furthermore, pendant drop tensiometry and quartz crystal microgravimetry were used to study adsorption behavior (adsorbed mass and adsorption rate) and stabilizing mechanism (layer thickness and interfacial tension). A more compact conformation resulted in a faster reduction of interfacial tension, higher adsorbed mass, and a thicker adsorption layer. In addition, emulsions were prepared at varying conditions (pH 3-5) and formulations (1-30 wt% MCT oil, 0.1-2 wt% SBP), and their droplet size distributions were measured. The smallest oil droplets could be stabilized at pH 3. However, significantly more pectin was required at pH 3 compared to pH 4 or 5 to sufficiently stabilize the oil droplets. Both phenomena were attributed to the more compact conformation of SBP at pH < pKa: On the one hand, pectins adsorbed faster and in greater quantity, forming a thicker interfacial layer. On the other hand, they covered less interfacial area per SBP molecule. Therefore, the SBP concentration must be chosen appropriately depending on the conformation.

Physicochemical characteristics and functional properties of high methoxyl pectin with different degree of esterification

Moderate alkali de-esterification can change the physicochemical characteristics and thus the functional properties of high methoxyl pectin (HMP). The results revealed that de-esterification could increase negative charges (Zeta potential from -21 to -31 mV), decrease molecular weight (from 448 to 136 kDa) and apparent viscosity of HMP. Homogalacturonan (HG) content decreased (from 62% to 49%) while rhamnogalacturonan Ⅰ (RG-Ⅰ) content increased (from 32% to 46%) after de-esterification. The group characteristics of HMP with different degree of esterification (DE) were similar and no obvious impact was made on degree of crystallinity by alkali de-esterification. A conformation transition of HMP molecule implied by Congo red test were occurred as the DE decreased. With the decrease of DE, the molecular structure of HMP became shorter and smaller, and the entanglement was weaker. The de-esterification caused slight decrease of thermal stability. Alkali de-esterification would weaken the gel property and the emulsifying ability of HMP.

Effects of isolation conditions on structural and functional properties of the seed gum from Chinese quince (Chaenomeles sinensis)

Chinese quince seed gum (CQSG) extracted under water-, alkali- and acid- conditions at 25, 50, and 80 °C, were evaluated in terms of yield, monosaccharide composition, molecular distribution, thermal gravimetry, emulsifying stability, rheological properties, and free radical scavenging ability. The results showed that the yield of CQSG increased to 3.9% after water extraction at 80 °C. Alkali and acid treatments promoted the conversion of neutral sugars to the uronic acid branch. Regardless of the extraction temperature, the xylose chain was the main component (35%-40%); however, a reduction was observed as the extraction temperature increased to 80 °C. All CQSG solutions extracted under these isolation conditions exhibited non-Newtonian rheological behavior. Compared to water-extracted samples, the alkali-extracted samples showed the worst thermal stability, while the acid-treated samples showed the worst emulsifying stability. This study provides theoretical support for the potential application of CQSG polysaccharides in the food and pharmaceutical industries.

Emulsifying capacity of peanut polysaccharide: Improving interfacial property through the co-dissolution of protein during extraction

The co-dissolution of residual protein from byproduct (PPSI) was employed to improve the interfacial property of peanut polysaccharide (PPS). Protein content in the PPSI and PPS were 16.89% and 2.58%, respectively. The convent bonding and intermolecular interaction maintained the complex structure in PPSI. More protein promoted the shift from linear chain conformation to spherical particle, weakened surface charge, induced stronger intermolecular attraction and wettability, which facilitated interfacial adsorption of PPSI. Concomitantly, the linear chain after adsorbing the O/W interface was observed in PPSI-polystyrene, promoting the cross-linking between adsorption layers and thereby forming the elastic interfacial film. Consequently, the emulsion borne smaller size. Subsequently, the particles in continuous phase moved to the adsorption layer via intermolecular interaction and then formed a gel, enhancing stability against oil coalescence, the thermal and refrigerated treatments. Additionally, the acidified (pH 3.0) PPSI further strengthened the emulsion structure and improved its creaming and freeze-thaw stability.

Structural properties of diluted alkali-soluble pectin from Pyrus communis L. in water and salt solutions

The self-assembly and gelation of low-methoxyl diluted alkali-soluble pectin (LM DASP) from pear fruit (Pyrus communis L. cv. Conference) was studied in water and salt solutions (NaCl and CaCl₂, constant ionic strength) without pH adjustment at 20 °C. The samples at different LM DASP concentrations were characterized using rheological tests, Fourier-transform infrared spectroscopy, dual-angle dynamic light scattering and atomic force microscopy. LM DASP from pear fruit (Pyrus communis L.) showed gelling ability. The indices (aggregation index and shape factor) based on light scattering may be useful for the characterization of structural changes in polysaccharide suspension, particularly for the determination of a gel point. The results obtained may be important for the food, cosmetic and pharmaceutical industries where pectin is used as a texturizer, an encapsulating agent, a carrier of bioactive substances or a gelling agent.

Structural and Emulsifying Properties of Citric Acid Extracted Satsuma Mandarin Peel Pectin

Satsuma mandarin peel pectin (MPP) was extracted by citric acid and its structure and emulsifying ability were evaluated. Structural characterization, including NMR, FTIR, monosaccharide compositions demonstrated that MMP showed lower DM value and higher Mw than commercial citrus pectin (CCP). In addition, MPP exhibited significantly better emulsification performance than CCP. When MPP concentration was increased to 1%, 1.5% (10 g/L, 15 g/L) and the pH was 3 (acidic condition), a stable emulsion containing 10% oil fraction could be obtained. The particle size of the obtained emulsion was ranging from 1.0–2.3 μm, its emulsifying activity ranged from 93–100% and emulsifying stability was 94–100%. Besides, MPP can better ensure the storage stability of higher oil ratio emulsions. The results demonstrated that the stable emulsifying properties of MPP may largely depend on the lower DM value and higher Mw. MPP could be used as a novel polysaccharide emulsifier, especially under acidic conditions, providing a promising alternative for natural emulsifiers that could be used in the food industry.

Interfacial and Emulsion Characteristics of Oil-Water Systems in the Presence of Polymeric Lignin Surfactant

It is hypothesized that polymeric lignin surfactants have different affinities for stabilizing oil-water emulsions and that the emulsifying performance of these surfactants is highly affected by their adsorption performance at the oil-water interface. To validate this hypothesis, the adsorption performance of sulfethylated lignin (SEKL) surfactant at different oil-water interfaces was examined by assessing the contact angle, dynamic interfacial tension, and surface loading (Γ). Moreover, the interfacial adsorption kinetics of SEKL was comprehensively assessed in different oil-water systems to reveal the mechanisms of the SEKL adsorption at the interface. Also, the impacts of SEKL concentration and ionic strength on the performance of SEKL as an effective emulsifier for the emulsions were assessed. Furthermore, the droplet size and instability index of the emulsions were systematically correlated with the adsorption performance of SEKL at the interface of oil and water. For the first time, by implementing a modified Ward Toradai diffusion model, two distinct early stages of the adsorption of SEKL at the oil interface were identified. Interestingly, the second stage was the determining stage of adsorption with the diffusion-controlled mechanism when polymers reconfigured at the oil-water interface. Salt screening facilitated the clustering of SEKL upon charge repulsion elimination, which removed the energy barrier in the first stage of adsorption (ΔE_p→0 = 0), but it introduced a steric barrier upon the reconfiguration of polymers at the oil interfaces in the second stage of adsorption. In addition to the kinetics of adsorption, satisfactory correlations were observed between surface pressure (Δγ = γ_∞ - γ₀), surface loading (Γ) of polymers, and contact angle at oil interfaces on one hand and the oil droplet size and emulsion stability on the other hand.

Advances and prospects in the food applications of pectin hydrogels

Pectin hydrogel is a soft hydrocolloid with multifaceted utilities in the food sector. Substantial knowledge acquired on the gelation mechanisms and structure-function relationship of pectin has led to interesting functions of pectin hydrogel. Food applications of pectin hydrogels can be categorized under four headings: food ingredients/additives, food packaging, bioactive delivery and health management. The cross-linked and tangly three-dimensional structure of pectin gel renders it an ideal choice of wall material for the encapsulation of biomolecules and living cells; as a fat replacer and texturizer. Likewise, pectin hydrogel is an effective satiety inducer due to its ability to swell under the simulated gastric and intestinal conditions without losing its gel structure. Coating or composites of pectin hydrogel with proteins and other polysaccharides augment its functionality as an encapsulant, satiety-inducer and food packaging material. Low-methoxyl pectin gel is an appropriate food ink for 3D printing applications due to its viscoelastic properties, adaptable microstructure and texture properties. This review aims at explaining all the applications of pectin hydrogels, as mentioned above. A comprehensive discussion is presented on the approaches by which pectin hydrogel can be transformed as a resourceful material by controlling its dimensions, state, and rheology. The final sections of this article emphasize the recent research trends in this discipline, such as the development of smart hydrogels, injectable gels, aerogels, xerogels and oleogels from pectin.

Structural and emulsion stabilizing properties of pectin rich extracts obtained from different botanical sources

The presented research studied the emulsifying and emulsion stabilizing capacity of pectin samples isolated from different plant origin: apple, carrot, onion and tomato. The acid extracted pectin samples showed distinct structural properties. Specifically, apple pectin showed a high degree of methylesterification (78.41 ± 0.83%), carrot pectin had the lowest concentration of other co-eluted cell wall polymers, onion pectin displayed a bimodal molar mass distribution suggesting two polymer fractions with different molar mass and tomato pectin was characterized by a high protein content (16.48 ± 0.05%). The evaluation of the emulsifying and emulsion stabilizing potential of the pectin samples included investigating their ability to lower the interfacial tension next to a storage stability study of pectin stabilized o/w emulsions. Creaming behavior as well as the evolution of the oil droplet size were thoroughly examined during storage using multiple analytical techniques. Overall, smaller oil droplet sizes were obtained at pH 2.5 compared to pH 6.0 indicating better emulsifying capacity at lower pH. The lowest emulsion stability was observed in emulsions formulated with tomato pectin in which weak flocculation and relatively fast creaming affected emulsion stability. Onion pectin clearly showed the most promising emulsifying and emulsion stabilizing potential. At both pH conditions, emulsions stabilized by the onion pectin sample displayed highly stable oil droplet sizes during the whole storage period. The presence of the two polymer fractions in this sample can play an important role in the observed stability. In future work, it could be evaluated if both fractions contribute to emulsion stability in a synergistic way. In conclusion, this work showed that pectin samples extracted from different plant origin display diverse structural properties resulting in varying emulsifying and emulsion stabilizing potential. Polymer molar mass potentially plays a major role in the structure-function relation.

The primary, secondary, and structures of higher levels of pectin polysaccharides

Pectin is a heteropolysaccharide abundant in the cell wall of plants and is obtained mainly from fruit (citrus and apple), thus its properties are particularly prone to changes occurring during ripening process. Properties of pectin depend on the string-like structure (conformation, stiffness) of the molecules that determines their mutual interaction and with the surrounding environment. Therefore, in this review the primary, secondary, and structures of higher levels of pectin chains are discussed in relation to external factors including crosslinking mechanisms. The review shows that the primary structure of pectin is relatively well known, however, we still know little about the conformation and properties of the more realistic systems of higher orders involving side chains, functional groups, and complexes of pectin domains. In particular, there is lack of knowledge on the influence of postharvest changes and extraction method on the primary and secondary structure of pectin that would affect conformation in a given environment and assembly to higher structural levels. Exploring the above-mentioned issues will allow to improve our understanding of pectin functionality and will help to tailor new functionalities for the food industry based on natural but often biologically variable source. The review also demonstrates that atomic force microscopy is a very convenient and adequate tool for the evaluation of pectin conformation since it allows for the relatively straightforward stretching of the pectin molecule in order to measure the force-extension curve which is directly related to its stiffness or flexibility.

Pectin-peptide complexes ameliorated physicochemical stabilities and in vitro digestion abilities of β-carotene loaded emulsions

To improve the stabilities of low methoxy pectin (LMP) stabilized O/W emulsions for the delivery of bioactive substances, LMP was firstly modified with soy peptide (SP), corn peptide (CP) and whey protein peptide (WPP), respectively, by using dry-heat method, then the properties of LMP-peptide complexes stabilized O/W emulsions were characterized and the in vitro digestion of emulsions with β-carotene was test to evaluate the potential applications. LMP-peptide complexes were formed by covalent bonds according to FT-IR spectroscopy. Compared to LMP stabilized emulsions, LMP-peptide complexes stabilized emulsions had smaller droplet sizes and higher stabilities in the changed pH value, temperature and ionic strength. Based on the results of in vitro digestion tests, LMP-SP and LMP-WPP obtained by incubating LMP with peptides at 60 °C for 12 h at the weight ratio of 4:1 were more suitable for the preparation of O/W emulsions to deliver camellia oil and β-carotene.

Effects of structural and conformational characteristics of citrus pectin on its functional properties

Ultrasonic degradation has become a fascinating strategy for preparing modified pectin, contributing to the improvement of pectin's functional characteristics. In this study, the impacts of structural and conformational characteristics of original and ultrasound-treated citrus pectins on their functional properties were examined. The results showed that compared with ultrasound-treated pectins, untreated pectin presented higher rheological and gelling properties primarily attributed to its larger weight-average molecular weight (M_w), degree of methoxylation, amount of neutral sugar side chains, and z-average radius of gyration, as well as the more extended flexible-chain conformation. However, the ultrasound-treated pectins had better emulsifying properties than untreated pectin in an oil-in-water emulsion system. These properties, visually suggested by morphology analysis, including enhanced emulsifying capacity, emulsifying stability, reduced mean droplet size and negatively charged zeta potential. Moreover, the M_w and chain conformation of untreated and ultrasound-treated pectins played more decisive roles in their functional properties than the others.