Formation, stability and antioxidant activity of food-grade multilayer emulsions containing resveratrol

High internal phase Pickering emulsions stabilized by egg yolk-carboxymethyl cellulose as an age-friendly dysphagia food: Tracking the dynamic transition from co-solubility to coacervates

Although protein-polysaccharide complexes with different phase behaviors all show potential for stabilizing high internal phase Pickering emulsions (HIPPEs), it is not clarified which aggregation state is more stable and age-friendly. In this study, we investigated and compared the stability and age friendliness of HIPPEs stabilized with egg yolk and carboxymethyl cellulose (EYCMC) in different phase behaviors. The results revealed differences in particle size, aggregation state, charge potential, and stability of secondary and tertiary structures of EYCMC. The behavior of EYCMC at the oil-water interface was mainly divided into three phases: rapid diffusion, permeation, and reorganization. The electrostatic interaction, kinetic hindrance, and depletion attraction were the mechanisms primarily involved in stabilizing HIPPEs by EYCMC. Rheological analysis results indicated that HIPPEs had excellent viscoelasticity, structural recovery properties and yield stress. HIPPEs were used in 3D printing, electronic nose testing, IDDSI testing and in vitro digestive simulations for the elderly, demonstrating a fine appearance, safe consumption and bioaccessibility of β-carotene. Soluble complexes showed the best stability and age friendliness compared to other aggregated forms. This study serves as a foundational source of information for developing innovative foods utilizing HIPPEs.

Recent advances in encapsulation of resveratrol for enhanced delivery

Due to its numerous biological activities, such as antioxidant, anti-inflammatory, antitumor, anti-atherosclerosis, anti-aging, anti-osteoporosis, anti-obesity, estrogenic, neuroprotective and cardioprotective effects, resveratrol has attracted a lot of attention in the food and pharmaceutical industries as a promising bioactive. However, low solubility in aqueous media, limited bioavailability, and low stability of resveratrol in hostile environments limit its applications. The necessity for a summary of recent developments is highlighted by the growing body of research on resveratrol encapsulation as a means of overcoming the mentioned application constraints. This review highlights the present developments in resveratrol delivery techniques, including spray drying, liposomes, emulsions, and nanoencapsulation. Bioaccessibility, bioavailability, stability, and release of resveratrol from encapsulating matrices are discussed. Future research should focus on encapsulation approaches with high loading capacity, targeted delivery, and controlled release. In light of the growing interest in resveratrol and the increasing complexity of resveratrol-based formulations, review of current encapsulation methods is crucial to address existing limitations and pave the way for the development of next-generation delivery systems. This review discusses how the delivery systems with different structures and release mechanisms can unlock the full potential and benefits of resveratrol by enhancing its bioavailability and stability.

Encapsulation of grape seed oil in oil-in-water emulsion using multilayer technology: Investigation of physical stability, physicochemical and oxidative properties of emulsions under the influence of the number of layers

Many studies have shown that grape seed oil (GSO) is one of the vegetable fats that are plentiful in essential fatty acids and can be used as a fat substitute or to modify fat in food products to reduce saturated fatty acids. However, due to its low solubility and high sensitivity to oxidation, it is necessary to develop delivery systems that can distribute GSO in food more effectively. Recently, the preparation of emulsions using the layer-by-layer (LBL) method has many advantages in delivering lipid-soluble functional compounds. This research was used to check the formation of GSO oil-loaded primary, secondary and tertiary multilayer emulsions stabilized by mixture of anionic gelatin, cationic chitosan, and anionic basil seed gum (BSG) as the aqueous phase at pH 5, prepared using a layer-by-layer electrostatic deposition technique. Multilayer emulsions prepared by GSO and a mixture of gelatin, chitosan, and BSG as the aqueous phase at pH 5. Finally, the effect of the number of layers on the physicochemical properties (particle size, viscosity, turbidity, refractive index, and physical stability) and oxidative stability (peroxide value, thiobarbituric acid value, and fatty acid profile) during the storage time (30 days) at two temperatures 25 °C & 4 °C was investigated. Also, the zeta potential and Fourier transform infrared spectroscopy (FTIR) of mono-layer and multi-layer emulsions were investigated. The results revealed that by increasing the number of layers of multi-layer emulsion of GSO, the stability has improved. Thus, the tertiary emulsion has been more effective than the other two emulsions in maintaining the physicochemical characteristics and stability over time (P < 0.001). Morphological characterization and FTIR spectroscopy results confirmed that gelatin, chitosan, and BSG were successfully loaded into the LBL emulsions. This study can improve the original percept of multilayer emulsions and promulgate their potential applications for the entire encapsulation of essential fatty acids to enrich and prevent peroxide attack.

Preparation and characterization of astaxanthin-loaded microcapsules stabilized by lecithin-chitosan-alginate interfaces with layer-by-layer assembly method

Astaxanthin is a kind of keto-carotenes with various health benefits. However, its solubility and chemical stability are poor, which leads to low bio-availability. Microcapsules have been reported to improve the solubility, chemical stability, and bio-availability of lipophilic bioactives. Freeze-dried astaxanthin-loaded microcapsules were prepared by layer-by-layer assembly of tertiary emulsions with maltodextrin as the filling matrix. Tertiary emulsions were fabricated by performing chitosan and sodium alginate electrostatic deposition onto soybean lecithin stabilized emulsions. 0.9 wt% of chitosan solution, 0.3 wt% of sodium alginate solution and 20 wt% of maltodextrin were optimized as the suitable concentrations. The prepared microcapsules were powders with irregular blocky structures. The astaxanthin loading was 0.56 ± 0.05 % and the encapsulation efficiency was >90 %. A slow release of astaxanthin could be observed in microcapsules promoted by the modulating of chitosan, alginate and maltodextrin. In vitro simulated digestion displayed that the microcapsules increased the bio-accessibility of astaxanthin to 69 ± 1 %. Chitosan, alginate and maltodextrin can control the digestion of microcapsules. The coating of chitosan and sodium alginate, and the filling of maltodextrin in microcapsules improved the chemical stability of astaxanthin. The constructed microcapsules were valuable to enrich scientific knowledge about improving the application of functional ingredients.

Lipid-based nanocarriers for enhanced delivery of plant-derived bioactive molecules: a comprehensive review

Bioactive compounds derived from plants have been investigated for treating various pathological conditions. However, the utilization of these compounds has challenges such as instability, low solubility and bioavailability. To overcome these challenges, the encapsulation of bioactive molecules with in a novel nano carrier system enabling effective delivery and clinical translation has become essential. Lipid-based nanocarriers provide versatile platforms for encapsulating and delivering bioactive compounds and overcome the challenges. These novel carriers can improve solubility, stability, improved drug retention and therapeutic efficacy of plant derived bioactive compounds. The current review evaluates the challenges in delivery of plant bioactives and highlights the potential of various lipid-based nano carriers designed to improve its therapeutic efficacy.

Development and characterization of antimicrobial alginate hydrogel beads filled with cinnamon essential oil nanoemulsion

The aim of the present study was to investigate the characteristics of alginate beads filled with cinnamon essential oil nanoemulsions (CEONs). The influence of the alginate and CaCl2 concentrations on their physical, antimicrobial and antioxidant properties was studied. The droplet size of CEON was 146.20 ± 39.28 nm and the zeta potential was -33.8 ± 0.72 mV demonstrating proper nanoemulsions stability. Decreasing the alginate and CaCl2 concentrations resulted in higher EOs release due to the increased pore size of the alginate beads. The scavenging activity of DPPH of beads was found to be dependent on the alginate and calcium ion concentrations which affected the pore size of the fabricated beads. The FT-IR results declared the new bands in the spectra of filled hydrogel beads, which verified the encapsulation of EOs in the beads. The surface morphology of beads was studied using SEM images which showed the spherical shape and porous structure of alginate beads. In addition, the alginate beads filled with CEO nanoemulsion demonstrated strong antibacterial activity.

Oil-Based Double Emulsion Microcarriers for Enhanced Stability and Bioaccessibility of Betalains and Phenolic Compounds from Opuntia stricta var. dillenii Green Extracts

Opuntia cactus fruit (prickly pear flesh and agricultural residues such as peels and stalks) is an important source of bioactive compounds, including betalains and phenolic compounds. In this work, two double emulsion W₁/O/W₂ formulations (A and B) were designed to encapsulate green extracts rich in betalains and phenolic compounds obtained from Opuntia stricta var. dillenii (OPD) fruits with the aim of improving their stability and protecting them during the in vitro gastrointestinal digestion process. In addition, the characterization of the double emulsions was studied by microscopy and the evaluation of their physical and physico-chemical parameters. Formulation A, based on Tween 20, showed smaller droplets (1.75 µm) and a higher physical stability than Formulation B, which was achieved with sodium caseinate (29.03 µm). Regarding the encapsulation efficiency of the individual bioactives, betalains showed the highest values (73.7 ± 6.7 to 96.9 ± 3.3%), followed by flavonoids (68.2 ± 5.9 to 95.9 ± 7.7%) and piscidic acid (71 ± 1.3 to 70.2 ± 5.7%) depending on the formulation and the bioactive compound. In vitro digestive stability and bioaccessibility of the individual bioactives increased when extracts were encapsulated for both formulations (67.1 to 253.1%) in comparison with the non-encapsulated ones (30.1 to 64.3%), except for neobetanin. Both formulations could be considered as appropriate microcarrier systems for green OPD extracts, especially formulation A. Further studies need to be conducted about the incorporation of these formulations to develop healthier foods.

Stability, oxidizability, and topical delivery of resveratrol encapsulated in octenyl succinic anhydride starch/chitosan complex-stabilized high internal phase Pickering emulsions

High internal phase Pickering emulsions (HIPPEs) stabilized with octenyl succinic anhydride starch/chitosan complexes were examined as a topical delivery vehicle for resveratrol. All resveratrol-loaded HIPPEs showed stable gel-like network structures, with the droplet size and microrheological properties largely dependent on the complex concentrations. HIPPEs exhibited strong stability when subjected to light, high temperature, UV radiation and freeze-thaw treatment, and resveratrol retention was greatly improved with the increasing addition of complexes and resveratrol. High amounts of resveratrol facilitated the antioxidant activity of HIPPEs, whereas sustained release of resveratrol was mainly related to the existence of complex interfacial layers. Moreover, HIPPEs overcome the stratum corneum barrier, with an approximately 3-5-fold increase in resveratrol deposition in deep skin compared to bulk oil. In conclusion, the emulsion composition (especially at the particle level) was vital for the effectiveness of HIPPEs as a carrier, which may provide new opportunities to design topical delivery systems.

Triggered and controlled release of bioactives in food applications

Bioactive compounds (e.g., nutraceuticals, micronutrients, antimicrobial, antioxidant) are added to food products and formulations to enhance sensorial/nutritional attributes and/or shelf-life. Many of these bioactives are susceptible to degradation when exposed to environmental and processing factors. Others involve in undesirable interactions with food constituents. Encapsulation is a useful tool for addressing these issues through various stabilization mechanisms. Besides protection, another important requirement of encapsulation is to design a carrier that predictably releases the encapsulated bioactive at the target site to elicit its intended functionality. To this end, controlled release carrier systems derived from interactive materials have been developed and commercially exploited to meet the requirements of various applications. This chapter provides an overview on basic controlled and triggered release concepts relevant to food and active packaging applications. Different approaches to encapsulate bioactive compounds and their mode of release are presented, from simple blending with a compatible matrix to complex multiphase carrier systems. To further elucidate the mass transport processes, selected diffusion and empirical release kinetic models are presented, along with their brief historical significance. Finally, interactive carriers that are responsive to moisture, pH, thermal and chemical stimuli are presented to illustrate how these triggered release mechanisms can be useful for food applications.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Characteristics of Pickering emulsions stabilized by tea water-insoluble protein nanoparticles at different pH values

This study aimed to explore the characteristics of Pickering emulsions stabilized by tea water-insoluble protein nanoparticles (TWIPNs) at different pH values. The characteristics of TWIPNs at different pH values were analysed first. The average hydrodynamic diameter of TWIPNs in the suspension was smaller than 400 nm at pH 7-11. TWIPNs at pH 3 could not be used to stabilize Pickering emulsions. The flocculation index (FI) of fresh TWIPN-stabilized Pickering emulsions (TWIPNPEs) at pH 5 was higher than those of TWIPNPEs at pH 7-11 (FI < 5%), indicating that bridging flocculation led to the aggregation of small emulsion droplets. The zeta potential of TWIPNPEs at pH 7-11 did not change after 7 d. In addition, the TWIPNPEs showed gel-like properties under neutral and alkaline conditions. These results will be helpful for broadening the application of TWIPNPEs at different pH values.

Advances in biopolymeric active films incorporated with emulsified lipophilic compounds: a review

The attention towards active films has increased due to consumer demand for high-quality foods without chemical additives. Active biopolymer-based films have shown great potential for active films by impacting food safety, acting as the carriers of various natural antioxidant and antimicrobial compounds, and decreasing environmental pollution from petrol-derived packaging materials. However, there is a wide range of challenges concerning the different characteristics of biopolymers and plasticizers, often hygroscopic/hydrophilic, compared to numerous lipophilic bioactive compounds. Therefore, recent studies have focused on applying oil-in-water emulsion-based systems to enhance the lipophilic bioactive compounds' dispersibility into the film matrix, improving their performance. It is worth emphasizing that resulting complex systems give rise to new challenges such as (i) dispersion technology of the bioactive compounds with minimum adverse effects on its bioactivities, (ii) interactions between different components of the active films, giving rise to new physicochemical properties, and (iii) the change of the diffusion properties of bioactive compounds into the active films, resulting in different release properties. These challenges are profound and critically discussed in this review, as well as the encapsulation techniques employed in preparing emulsions loaded with lipophilic bioactive compounds for the active film development. An outlook of future directions in the research, development, and application of these active films are given.

Microencapsulation of Curcumin in Crosslinked Jelly Fig Pectin Using Vacuum Spray Drying Technique for Effective Drug Delivery

Microencapsulation of curcumin in jelly fig pectin was performed by the vacuum spray drying (VSD) technique. The VSD was advanced with a low inlet temperature of 80-90 °C and low pressure of 0.01 mPa. By the in situ cross-linking with multivalent calcium ions, jelly fig pectin produced stable curcumin encapsulated microparticles. The physiochemical characteristics of microparticles were thoroughly investigated. The results revealed that 0.75 w/w% of jelly fig pectin and inlet temperature of 90 °C could be feasible for obtaining curcumin microparticles. The VSD technique showed the best encapsulation efficiency and yield and loading efficiency was up to 91.56 ± 0.80%, 70.02 ± 1.96%, and 5.45 ± 0.14%, respectively. The curcumin was readily released into simulated gastrointestinal fluid with 95.34 ± 0.78% cumulative release in 24 h. The antioxidant activity was stable after being stored for six months and stored as a solution for seven days at room temperature before analysis. Hence, the VSD technique could be applicable for the microencapsulation of bioactive compounds such as curcumin to protect and use in the food/pharmaceutical industry.

Application of Advanced Emulsion Technology in the Food Industry: A Review and Critical Evaluation

The food industry is one of the major users of emulsion technology, as many food products exist in an emulsified form, including many dressings, sauces, spreads, dips, creams, and beverages. Recently, there has been an interest in improving the healthiness, sustainability, and safety of foods in an attempt to address some of the negative effects associated with the modern food supply, such as rising chronic diseases, environmental damage, and food safety concerns. Advanced emulsion technologies can be used to address many of these concerns. In this review article, recent studies on the development and utilization of these advanced technologies are critically assessed, including nanoemulsions, high internal phase emulsions (HIPEs), Pickering emulsions, multilayer emulsions, solid lipid nanoparticles (SLNs), multiple emulsions, and emulgels. A brief description of each type of emulsion is given, then their formation and properties are described, and finally their potential applications in the food industry are presented. Special emphasis is given to the utilization of these advanced technologies for the delivery of bioactive compounds.

Chitosan-sodium alginate-fatty acid nanocarrier system: Lutein bioavailability, absorption pharmacokinetics in diabetic rat and protection of retinal cells against H2O2 induced oxidative stress in vitro

Aiming to enhance therapeutic efficiency of lutein, lutein loaded chitosan-sodium alginate (CS-SA) based nanocarrier system (LNCs) were prepared and evaluated for lutein bioavailability and pharmacokinetics in diabetic rats in comparison to micellar lutein (control). Further, cytotoxicity, cellular uptake and protective activity against H₂O₂ induced oxidative stress in ARPE-19 cells were studied. Results revealed that LNCs displayed maximal lutein AUC in plasma, liver and eye respectively in normal (3.1, 2.7 and 5.2 folds) and diabetic (7.3, 3.4 and 2.8 folds) rats. Lutein from LNCs exhibited a higher half-life time, mean residence time and slow clearance from the plasma, indicating prolonged circulation compared to control. In ARPE-19 cells, pre-treatment with LNCs (10 μM) have significantly attenuated H₂O₂ induced cell death, intracellular ROS and mitochondrial membrane potential compared to control. In conclusion, LNCs improve the lutein bioavailability in conditions like diabetes, diabetic retinopathy and cataract to curtail oxidative stress in retinal cells.

Recent Strategies in Resveratrol Delivery Systems

Resveratrol, a natural polyphenolic stilbenoid widely found in grapes and wines, displays beneficial properties such as cardio-protective, antioxidant and anti-inflammatory activities. Trans-resveratrol (RSV) is the most bioactive and more abundant stereoisomer found in nature. Despite the positive properties of RSV, there are various factors that limit its effectiveness, including low aqueous solubility, low oral bioavailability and chemical instability. During the last years, an increasing number of strategies such as nano and micro encapsulation have been developed in order to overcome these limitations and enhance the use of RSV in nutritional and pharmaceutical applications. This Review summarizes the advances and main properties of several RSV carriers and delivery systems reported during the last 5 years.

Resveratrol: a review of plant sources, synthesis, stability, modification and food application

Resveratrol, a stilbene molecule belonging to the polyphenol family, is usually extracted from a great many natural plants. The technologies of preparation and extraction methods are developing rapidly. As resveratrol has many beneficial properties, it has been widely utilized in food and medicine industry. In terms of its structure, it is susceptible to degradation and can undergo chemical changes during food processing. Different studies have therefore given more attention to various aspects of resveratrol, including anti-aging, anti-oxidant, and anti-cancer activity. This review classifies the study of resveratrol, considers plant sources, synthesis, stability, common reactions, and food applications, and provides references to boost its food and medical utilization. © 2019 Society of Chemical Industry.

Nanostructured Lipid-Based Delivery Systems as a Strategy to Increase Functionality of Bioactive Compounds

Acquisition of a healthy lifestyle through diet has driven the food manufacturing industry to produce new food products with high nutritional quality. In this sense, consumption of bioactive compounds has been associated with a decreased risk of suffering chronic diseases. Nonetheless, due to their low solubility in aqueous matrices, high instability in food products during processing and preparation as well as poor bioavailability, the use of such compounds is sometimes limited. Recent advancements in encapsulation and protection of bioactive compounds has opened new possibilities for the development of novel food products. In this direction, the present review is attempting to describe encapsulation achievements, with special attention to nanostructured lipid-based delivery systems, i.e., nanoemulsions, multi-layer emulsions and liposomes. Functionality of bioactive compounds is directly associated with their bioavailability, which in turn is governed by several complex processes, including the passage through the gastrointestinal tract and transport to epithelial cells. Therefore, an overview of recent research on the properties of these nanostructured lipid-based delivery systems with a strong impact on the functionality of bioactive compounds will be also provided. Nanostructured lipid-based delivery systems might be used as a potential option to enhance the solubility, stability, absorption and, ultimately, functionality of bioactive compounds. Several studies have been performed in this line, modifying the composition of the nanostructures, such as the lipid-type or surfactants. Overall, influencing factors and strategies to improve the efficacy of encapsulated bioactive compounds within nanostructures have been successfully identified. This knowledge can be used to design effective targeted nanostructured lipid-based delivery systems for bioactive compounds. However, there is still a lack of information on food interactions, toxicity and long-term consumption of such nanostructures.

α-Lactalbumin and chitosan core–shell nanoparticles: resveratrol loading, protection, and antioxidant activity

Resveratrol (RES)-loaded protein–polysaccharide nanoparticles were fabricated through simple electrostatic interactions with oppositely charged α-lactalbumin (ALA) and chitosan (CHI) with a mass ratio of 5 : 1 without the addition of NaCl at pH 6.5.

Lactoferrin-based nanoemulsions to improve the physical and chemical stability of omega-3 fatty acids

Omega-3 (ω-3) polyunsaturated fatty acids are highly susceptible to oxidation and have an intense odour and poor water solubility, which make their direct applications in foods extremely difficult.

Curcumin Encapsulation in Multilayer Oil-in-Water Emulsion: Synthesis Using Ultrasonication and Studies on Stability and Antioxidant and Release Activities

Curcumin is a natural polyphenol compound obtained from the turmeric plant, having numerous promising health benefits. To deliver curcumin into the human body, it is necessary to develop an efficient carrier system for its encapsulation such that the physicochemical properties of curcumin can be preserved during storage. In this study, the encapsulation stability, antioxidant activity, and release properties of curcumin encapsulated in the primary emulsion (PE: 0.0022% (w/w) curcumin, 9.99% (w/w) oil, 0.9% (w/w) whey protein isolate, pH 7) and secondary emulsion (SE: 0.00108% (w/w) curcumin, 4.90% (w/w) oil, 0.443% (w/w) WPI, 0.2% (w/w) sodium alginate, pH 5) prepared using ultrasonication were analyzed. It was observed that the formation of a double-layer coating of secondary biopolymer over the primary coated droplet enhanced the encapsulation efficiency and antioxidant activity of the curcumin during storage for 3 weeks. Moreover, the multilayer emulsions were freeze-dried to see the effect of dehydration of emulsion on the stability of multilayer-coated droplets. Fourier transform infrared analysis indicated the presence of all of the constituents, including curcumin, after the freeze drying of the emulsions. Scanning electron microscopy images showed that the microstructure of emulsion droplets was found to be uniformly distributed in the case of SE. The antioxidant activity of curcumin encapsulated in SE was found to be higher during storage, whereas it was significantly reduced in other encapsulated systems like PE, olive oil, and ethanol. In vitro release of curcumin from the multilayer emulsion was carried out under the simulated intestinal conditions of pancreatin enzyme and bile salt. Maximum releases of 71 and 63% were obtained in SE and PE, respectively, within 2 h of digestion. Overall, this study provides useful information on the formation of multilayer emulsion as a carrier system for the better protection and release of curcumin useful for food and pharmaceutical applications.

Novel Bilayer Emulsions Costabilized by Zein Colloidal Particles and Propylene Glycol Alginate. 2. Influence of Environmental Stresses on Stability and Rheological Properties

Novel bilayer emulsions co-stabilized by zein colloidal particles (ZCPs) and propylene glycol alginate (PGA) were designed to overcome some limitations of conventional emulsions or Pickering emulsions. The bilayer emulsions of various concentrations of PGA (0.01-1.50%, w/v) and different incorporation sequences of ZCPs and PGA (ZCPs/PGA and PGA/ZCPs) were fabricated using the layer by layer (LBL) electrostatic deposition technique. Influence of environmental stresses (pH 2.5-8.5; temperature 60-80 °C ; ionic strength 0-100 mM NaCl) was focused on the stability and rheological properties of the novel bilayer emulsions. In comparison to the Pickering emulsion stabilized by ZCPs alone, bilayer emulsions exhibited improved stability and unique rheological characteristics under environmental stresses. The microstructure of well-defined spheres existing a branchlike network was observed in bilayer emulsions by TEM. A comprehensive evaluation was made of the physical characteristics and stimuli-responsive behavior of bilayer emulsions. The result provided meaningful information for understanding the changing mechanism of rheology of bilayer emulsions under environmental stresses.

Drug Release Properties of Diflunisal from Layer-By-Layer Self-Assembled κ-Carrageenan/Chitosan Nanocapsules: Effect of Deposited Layers

Engineering of multifunctional drug nanocarriers combining stability and good release properties remains a great challenge. In this work, natural polymers κ-carrageenan (κ-CAR) and chitosan (CS) were deposited onto olive oil nanoemulsion droplets (NE) via layer-by-layer (LbL) self-assembly to study the release mechanisms of the anti-inflammatory diflunisal (DF) as a lipophilic drug model. The nano-systems were characterized by dynamic light scattering (DLS), zeta potential (ζ-potential) measurements, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (XEDS) and Fourier transform infrared spectroscopy (FTIR) to confirm the NE-coating with polymer layers. In addition, kinetic release studies of DF were developed by the dialysis diffusion bag technique. Mathematical models were applied to investigate the release mechanisms. The results showed that stable and suitably sized nanocapsules (~300 nm) were formed. Also, the consecutive adsorption of polyelectrolytes by charge reversal was evidenced. More interestingly, the drug release mechanism varied depending on the number of layers deposited. The nanosized systems containing up to two layers showed anomalous transport and first order kinetics. Formulations with three and four layers exhibited Case II transport releasing diflunisal with zero order kinetics. Hence, our results suggest that these polyelectrolyte nanocapsules have great potential as a multifunctional nanocarrier for drug delivery applications.

Development and stability evaluation of water-in-edible oils emulsions formulated with the incorporation of hydrophilic Hibiscus sabdariffa extract

New functional oils (extra virgin olive oil, EVOO and sunflower oil, SO) containing antioxidants from Hibiscus sabdariffa extract were developed by W/O emulsion. Their physical and chemical stability was measured over time. The lowest coalescence rate was obtained with 8 and 12 wt% surfactant amount for EVOO and SO emulsions, respectively. Before the evaluation of the oxidative stability, an optimization of phenolic compounds extraction from emulsions by multi-response surface methodology was performed. EVOO emulsions were chemically more stable over time than SO emulsions in terms of total phenolic content (TPC), antioxidant activity and chemical composition measured by HPLC-ESI.TOF-MS. TPC significantly increased (from 2.02 ± 0.07 to 2.71 ± 0.06 mg Eq GAE/g extract) and the antioxidant activity measured by TEAC remained constant for 1 month of storage. Thus, W/O emulsion technology has proven to be a potential method to vehiculize and stabilize bioactive compounds from H. sabdariffa into edible oils.

Enhancing the photostability and bioaccessibility of resveratrol using ovalbumin–carboxymethylcellulose nanocomplexes and nanoparticles

The objective of this study was to investigate the impact of encapsulating resveratrol in ovalbumin (OVA)–carboxymethylcellulose (CMC) nanocomplexes or nanoparticles on its photostability and bioaccessibility.