Effect of electrostatically charged and neutral polysaccharides on the rheological characteristics of peanut protein isolate after high-pressure homogenization

Insights into how characteristics of dissolved algal organic matter affect the efficiency of modified clay in controlling harmful algal blooms

Dissolved algal organic matter (dAOM) originating from harmful algal blooms (HABs) can deteriorate the quality of municipal water supplies, threaten the health of aquatic environments, and interfere with modified clay (MC)-based HABs control measures. In this study, we explored the composition of dAOM from Prorocentrum donghaiense, a typical HAB organism, and assessed the influence of dAOM on MC flocculation. Our results suggested that dAOM composition was complex and had a wide molecular weight (MW) distribution. MW and electrical properties were important dAOM characteristics affecting flocculation and algal removal efficiency of MC. Negatively charged high-MW components (>50 kDa) critically affected algal removal efficiency, reducing the zeta potential of MC particles and leading to small and weak flocs. However, the effect of dAOM depended on its concentration. When the cell density of P. donghaiense reached HAB levels, the high-MW dAOM strongly decreased the algal removal efficiency of MC.

Effects of fermentation with different probiotics on the quality, isoflavone content, and flavor of okara beverages

The present study aimed to prepare and evaluate a new probiotic functional beverage, using single-probiotic and compound probiotic fermentation on okara. Four different forms of fermentation microorganisms used were Lacticaseibacillus rhamnosus S24 (Lr), Lacticaseibacillus paracasei 6244 (Lp), Lactobacillus acidophilus 11,073 (La), and mixed fermentation (Lr + Lp + La). The physicochemical properties, antioxidant activity, flavor change, and storage period of fermented okara beverages with probiotics were investigated. The results showed that different fermentation schemes could significantly improve the physicochemical properties, antioxidant activity, and sensory quality of the okara beverages. The number of viable bacteria in the Lp group (3.53 × 108 CFU/mL), isoflavone content (0.514 μg/mL) were the highest; total phenol and flavonoid content were 3.32 and 5.68 times higher than in the CK group, respectively. DPPH and ABTS+ free radical scavenging rates were increased by 11.32% and 20%, respectively (p < .05). Through SPME/GC-MS analysis, 44 volatile compounds were identified in the Lr + Lp + La groups, mainly as a result of changes in alcohols and aldehydes produced by fermentation metabolism. It enhances the floral and fruity aroma of the okara beverage. All probiotic-fermented okara beverages can be stored at 4°C for 15 days, with probiotic activity greater than 107 CFU/mL. This study can obtain a probiotic okara beverage rich in soybean isoflavones and with good flavor. Overall, okara can be used to develop functional beverages containing probiotics and contribute to a zero-waste approach in the food industry.

Formation and microstructural characterization of scallop (Patinopecten yessoensis) male gonad hydrolysates/sodium alginate coacervations as a function of pH

Studying the noncovalent interactions between proteins and polysaccharides is quite important mainly due to the wide number of applications such as developing pH-responsive complexes. Scallop Patinopecten yessoensis male gonad hydrolysates‑sodium alginate (SMGHs-SA) was investigated as noncovalent complexes at pH from 1 to 10. The critical pH values pHC (around 6) and pHφ (around 4) were independent of the SMGHs-SA ratio, indicating the formation of soluble and insoluble complexes. The pH response of SMGHs-SA complexes was evaluated by investigating the rheological behavior, moisture distribution, functional group change and microstructure. Compared to the co-soluble and soluble complexes phases, the SMGHs-SA complexes had a higher storage modulus and viscosity as well as a lower relaxation time (T23) in the insoluble complexes phase (pHφ>3). Additionally, the amide I band and COO- stretching vibration peaks were redshifted and the amide A band vibration peaks were blueshifted by acidification. Electrostatic interactions and intermolecular/intramolecular hydrogen bonding led to SMGHs-SA agglomeration at pH 3, forming a uniform and dense gel network structure with strong gel strength and water-retention capacity. This study provides a theoretical and methodological basis for the design of novel pH-responsive complexes by studying SMGHs-SA complex coacervation.

Effect of roasting and high-pressure homogenization on texture, rheology, and microstructure of walnut yogurt

The effect of roasting and high-pressure homogenization on the quality of yogurt made from peeled walnut kernels was explored in this study. The G' and G'' values of yogurt made from walnuts roasted at high temperatures were reduced. The water-holding capacity and hardness of walnut yogurt were reduced to 47.73% and 24.22 g, respectively. Increasing the homogenization pressure reduced the particle size of the walnut yogurt to 20.50 μm. Homogenized walnut milk at 150 MPa increased the viscosity, hardness, and consistency of yogurt product from 11.71 to 16.74 Pa.s, from 30.01 to 71.63 g and from 283.17 to 455.24 g·s, respectively. The confocal laser scanning microscope observation demonstrated a reduction in the size of fat and protein micelles in the homogenized yogurt samples, resulting in a compact structure. This study will contribute valuable scientific insights to the advancement of plant-based yogurt quality.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

In-depth potential mechanism of combined demulsification pretreatments (isopropanol ultrasonic pretreatments and Ca2+ flow additions) during aqueous enzymatic extractions of Camellia oils

Emulsification is the practical limitation of aqueous enzymatic extractions of Camellia oils. This study aimed to investigate the influence and demulsification mechanisms of isopropanol ultrasonic pretreatments and Ca²⁺ additions on aqueous enzymatic extractions of Camellia oils. Combining isopropanol ultrasonic pretreatments with Ca²⁺ flow additions obtained the highest free oil recovery (78.03 %) and lowest emulsion content (1.5 %). Results indicated that the superior demulsification performance originated from the decrease in emulsion stabilities and formations. First, demulsification pretreatments reduced the oil (14.69 %) and solid (13.21 %) fractions in emulsions to decrease the stability of as-formed emulsions. Meanwhile, isopropanol ultrasonic pretreatments extracted tea saponins (0.38 mg/mL) and polysaccharides (0.23 mg/mL), while Ca²⁺ combined with protein isolates (5.82 mg/mL), tea saponins (7.48 mg/mL) and polysaccharides (0.78 mg/mL) to form precipitates and reduce emulsion formation. This work could promote the practical application of aqueous enzymatic extractions of Camellia oils and enlighten the rise of advanced demulsification pretreatments.

Legume protein/polysaccharide food hydrogels: Preparation methods, improvement strategies and applications

For the development of innovative foods and nutritional fortification, research into food gel is essential. As two types of rich natural gel material, both legume proteins and polysaccharides have high nutritional value and excellent application potential, attracting wide attention worldwide. Research has focused on combining legume proteins with polysaccharides to form hybrid hydrogels as their combinations show improved texture and water retention compared to single legume protein or single polysaccharide gels, and these properties can be tailored for specific applications. This article reviews hydrogels of common legume proteins and discusses heat induction, pH induction, salt ion induction, and enzyme-induced assembly of legume protein/polysaccharide mixtures. The applications of these hydrogels in fat replacement, satiety enhancement, and delivery of bioactive ingredients are discussed. Challenges for future work are also highlighted.

Advances in preparation and application of food-grade emulsion gels

Emulsion gel is a semi-solid or solid material with a three-dimensional net structure produced from emulsion through physical, enzymatic, chemical methods or their combination. Emulsion gels are widely used in food, pharmaceutical and cosmetic industries as carriers of bioactive substances and fat substitutes due to their unique properties. The modification of raw materials, and the application of different processing methods and associated process parameters profoundly affect the ease or difficult of gel formation, microstructure, hardness of the resulting emulsion gels. This paper reviews the important research undertaken in the last decade focusing on classification of emulsion gels, their preparation methods, the influence of processing method and associated process parameters on structure-function of emulsion gels. It also highlights current status of emulsion gels in food, pharmaceutical and medical industries and provides future outlook on research directions requiring to provide theoretical support for innovative applications of emulsion gels, particularly in food industry.

Clove Essential Oil Pickering Emulsions Stabilized with Lactoferrin/Fucoidan Complexes: Stability and Rheological Properties

Although studies have shown that lactoferrin (LF) and fucoidan (FD) can be used to stabilize Pickering emulsions, there have been no studies on the stabilization of Pickering emulsions via the use of LF-FD complexes. In this study, different LF-FD complexes were obtained by adjusting the pH and heating the LF and FD mixture while using different mass ratios, and the properties of the LF-FD complexes were investigated. The results showed that the optimal conditions for preparing the LF-FD complexes were a mass ratio of 1:1 (LF to FD) and a pH of 3.2. Under these conditions, the LF-FD complexes not only had a uniform particle size of 133.27 ± 1.45 nm but also had good thermal stability (the thermal denaturation temperature was 110.3 °C) and wettability (the air-water contact angle was 63.9 ± 1.90°). The concentration of the LF-FD complexes and the ratio of the oil phase influenced the stability and rheological properties of the Pickering emulsion such that both can be adjusted to prepare a Pickering emulsion with good performance. This indicates that LF-FD complexes represent promising applications for Pickering emulsions with adjustable properties.

Novel Colloidal Food Ingredients: Protein Complexes and Conjugates

Food proteins, polysaccharides, and polyphenols are natural ingredients with different functional attributes. For instance, many proteins are good emulsifiers and gelling agents, many polysaccharides are good thickening and stabilizing agents, and many polyphenols are good antioxidants and antimicrobials. These three kinds of ingredients can be combined into protein, polysaccharide, and/or polyphenol conjugates or complexes using covalent or noncovalent interactions to create novel multifunctional colloidal ingredients with new or improved properties. In this review, the formation, functionality, and potential applications of protein conjugates and complexes are discussed. In particular, the utilization of these colloidal ingredients to stabilize emulsions, control lipid digestion, encapsulate bioactive ingredients, modify textures, and form films is highlighted. Finally, future research needs in this area are briefly proposed. The rational design of protein complexes and conjugates may lead to the development of new functional ingredients that can be used to create more nutritious, sustainable, and healthy foods.

Conformational changes and physicochemical attributes of texturized pea protein isolate-konjac gum: With a new perspective of residence time during extrusion

The present study aimed to investigate the effects of different extrusion temperatures (110, 130 and 150 °C) and konjac gum addition (0.1 %, 0.2 %, and 0.3 %) on the flow behavior, physicochemical properties and microstructure of extruded pea protein isolate (PPI). The results showed that the textured protein could be improved by enhancing the extrusion temperature and adding konjac gum during extrusion. The water/oil holding capacity of PPI decreased and the SH content increased after extrusion. With temperature and konjac gum content increased, the β-sheet of extruded proteins transformed to other secondary structural components, and Trp residue transformed to a more polar environment, illustrating the changes in protein conformation. All extruded samples presented as yellow hue with little green and higher lightness, while excessive extrusion process reduced the brightness and promoted more formation of browning pigments. Extruded protein showed more associated layered with some air pores, and its hardness and chewiness increased with the increase of temperature and konjac gum concentration. Cluster analysis showed that the addition of konjac gum could effectively improve the quality characteristics of pea protein under low temperature extrusion, and the effect was similar to that of high temperature extrusion product. With the increase of konjac gum concentration, the flow pattern of protein extrusion gradually converted from plug flow to mixing flow, and the disorder degree of polysaccharide protein mixing system was enhanced. Moreover, Yeh-jaw model showed better fitting effect in F(θ) curves compared to Wolf-white.

Dynamic high pressure treatments: current advances on mechanistic-cum-transport phenomena approaches and plant protein functionalization

Dynamic high pressure treatment (DHPT) either by high pressure homogenization or microfluidisation, is an emerging concept used in the food industry for new products development through macromolecules modifications in addition to simple mixing and emulsification action. Mechanistic understanding of droplets breakup during high pressure homogenization is used to understand how these compact and high molecular weight-sized globular plant proteins are affected during DHPTs. Plant protein needs to be functionalized for advanced use in food formulation. DHPTs brought changes in plant proteins' secondary, tertiary, and quaternary structures through alterations in intermolecular and intramolecular interactions, sulfhydryl groups, and disulfide bonds. These structural changes in plant proteins affected their functional and physicochemical properties like solubility, oil and water holding capacity, gelation, emulsification, foaming, and rheological properties. These remarkable changes made utilization of this concept in novel food system applications like in plant-based dairy analogues. Overall, this review provides a comprehensive and critical understanding of DHPTs on their mechanistic and transport approaches for droplet breakup, structural and functional modification of plant macromolecules. This article also explores the potential of DHPT for formulating plant-based dairy analogues to meet healthy and sustainable food consumption needs. HIGHLIGHTSIt critically reviews high pressure homogenization (HPH) and microfluidisation (DHPM).It explores the mechanistic and transport phenomena approaches of HPH and DHPMHPH and DHPM can induce conformational and structural changes in plant proteins.Improvement in the functional properties of HPH and DHPM treated plant proteins.HPH and DHPM are potentially applicable for plant based dairy alternatives food system.

Feasibility of pomelo peel dietary fiber as natural functional emulsifier for preparation of Pickering-type emulsion

BACKGROUND

The application of Pickering emulsions stabilized by food-derived particles is of great interest, studies have focused on development of natural functional emulsifiers from agricultural byproducts. Dietary fiber (DF) has been recognizing for its excellent physiological functions. Moreover, physicochemical properties of pomelo peel DF (PDF) make it a potential emulsifier. However, pristine PDF is not suitable as emulsifier due to its compact physical structure and high hydrophobicity, which seriously limits its utilization. The objective of the study was to investigate the effects of cellulase on physicochemical properties of PDF and to illustrate the feasibility of cellulase modified PDF (MPDF) as natural functional emulsifier.

RESULTS

Cellulase modification significantly improved (P < 0.05) specific surface area, water-holding capacity/oil-holding capacity, viscoelasticity, hydrophobicity, and pore structure while decreased crystallinity index and particle size of PDF. Emulsion could remain stable over 30 days as MPDF concentrations up to 1 wt% and oil/water ratio 3:7. The appearance stability of emulsions was not influenced by temperature (4-60 °C), pH (3.0-12.0), and ion concentration (0-200 mmol L^-1 ) which was similar to Pickering emulsions. The mechanism of MPDF as an emulsifier was mainly attributed to the combination of Pickering effect and the three-dimensional network. In addition, MPDF showed higher antioxidant capacity in emulsions than other classical emulsifiers.

CONCLUSION

The results illustrated that MPDF has a favorable feasibility for preparation of stable Pickering-type emulsions, which will be a practical support for application of PDF as a natural functional emulsifier and will be helpful to realize the resource utilization of DF in pomelo industries. © 2022 Society of Chemical Industry.

Effect of Hydrothermal Cooking Combined with High-Pressure Homogenization and Enzymatic Hydrolysis on the Solubility and Stability of Peanut Protein at Low pH

A novel method combining high-pressure homogenization with enzymatic hydrolysis and hydrothermal cooking (HTC) was applied in this study to modify the structure of peanut protein, thus improving its physicochemical properties. Results showed that after combined modification, the solubility of peanut protein at a pH range of 2–10 was significantly improved. Moreover, the Turbiscan stability index of modified protein in the acidic solution was significantly decreased, indicating its excellent stability in low pH. From SDS-PAGE (Sodium Dodecyl Sulfate PolyAcrylamide Gel Electrophoresis), the high molecular weight fractions in modified protein were dissociated and the low molecular weight fractions increased. The combined modification decreased the particle size of peanut protein from 74.82 to 21.74 μm and shifted the isoelectric point to a lower pH. The improvement of solubility was also confirmed from the decrease in surface hydrophobicity and changes in secondary structure. This study provides some references on the modification of plant protein as well as addresses the possibility of applying peanut protein to acidic beverages.

Effects of κ-Carrageenan and Guar Gum on the Rheological Properties and Microstructure of Phycocyanin Gel

The effects of two polysaccharides on the performance and microstructure of phycocyanin gels were studied by choosing anionic polysaccharides (κ-carrageenan) and neutral polysaccharides (guar gum). The linear and nonlinear rheological properties and microstructure of the phycocyanin-polysaccharide composite gel were evaluated. The results show that both κ-carrageenan and guar gum can enhance the network structure of phycocyanin gel and weaken the frequency dependence. The sample with 0.4% κ-carrageenan has the highest gel strength. All samples exhibited Type I behavior (inter-cycling strain-thinning) and mainly elastic behavior. As the concentration of κ-carrageenan increases, hydrophobic interactions and disulfide bonds play an essential role in maintaining the three-dimensional structure of the gel. Too high a concentration of guar gum hinders the formation of protein disulfide bonds. This research can provide a theoretical basis for designing and developing new food products based on phycocyanin and different polysaccharides with ideal texture in the food industry.

Edible mayonnaise-like Pickering emulsion stabilized by pea protein isolate microgels: Effect of food ingredients in commercial mayonnaise recipe

Particle stabilized O/W Pickering emulsion has great potential for making egg-free mayonnaise. In this study, we fabricated pea protein isolate (PPI) microgels by gel-breaking method and applied in mayonnaise-like Pickering emulsion. The effects of acetic acid (pH), sodium chloride (NaCl), and sucrose, which are typically used in commercial mayonnaise were studied. The minimum droplet size (47.0 μm) was found below isoelectric point. The NaCl decreased ζ-potential to almost 0 and risen droplet size to 75.9 μm. The sucrose enhanced the emulsion's viscosity while lowering thixotropic recovery rate. Based on droplet size, viscosity, thixotropic recovery, and microstructure; 350 mmol NaCl and 4 wt% sucrose was finally used to make egg-free mayonnaise-like Pickering emulsion, and showed similar properties compared with commercial mayonnaise, and the thixotropy recovery rate was near 100%. A plant-scale test further confirmed the feasibility. The results showed the PPI microgels had a strong application prospect to form egg-free mayonnaise.

Emulsifying capacity of peanut polysaccharide: Improving interfacial property through the co-dissolution of protein during extraction

The co-dissolution of residual protein from byproduct (PPSI) was employed to improve the interfacial property of peanut polysaccharide (PPS). Protein content in the PPSI and PPS were 16.89% and 2.58%, respectively. The convent bonding and intermolecular interaction maintained the complex structure in PPSI. More protein promoted the shift from linear chain conformation to spherical particle, weakened surface charge, induced stronger intermolecular attraction and wettability, which facilitated interfacial adsorption of PPSI. Concomitantly, the linear chain after adsorbing the O/W interface was observed in PPSI-polystyrene, promoting the cross-linking between adsorption layers and thereby forming the elastic interfacial film. Consequently, the emulsion borne smaller size. Subsequently, the particles in continuous phase moved to the adsorption layer via intermolecular interaction and then formed a gel, enhancing stability against oil coalescence, the thermal and refrigerated treatments. Additionally, the acidified (pH 3.0) PPSI further strengthened the emulsion structure and improved its creaming and freeze-thaw stability.

Combined effects of ionic strength and enzymatic pre-treatment in thermal gelation of peanut proteins extracts

Peanut proteins are mostly composed of arachins and conarachins, globular proteins that can form gels under thermal denaturation or enzymatic treatment. We explored here how ionic strength (0.5 M or 0.8 M) and gelation process (a thermal treatment preceded or not by an enzymatic pre-treatment) could affect peanut protein gel properties. Gel formation and final properties were characterized by rheology, and gel structure was observed by confocal microscopy. We found that the ionic strength imposed during protein extraction determines the arachins/conarachins ratio, and that conarachins-rich samples give stronger gels, which is attributed to their higher content in free thiol groups and lysine residues. The gel storage modulus exhibited a power-law dependence with the protein concentration, which exponent depended on the gelation process. Rheological results, together with confocal microscopy imaging, showed that an enzymatic pre-treatment resulted in denser structures than when a simple thermal treatment was applied.

The viscosity behaviors of bacterial suspensions or extracellular polymeric substances and their effects on aerobic granular sludge

Although the viscosity behavior of bacteria and extracellular polymeric substances (EPS) in flocculent activated sludge (FAS) and aerobic granular sludge (AGS) has been investigated, no studies have explored the role of viscosity in microbial attachment in pure culture. This study investigated the viscosity behavior of bacteria and EPS. The results showed that bacteria and their EPS exhibited non-Newtonian fluid and shear-thinning behavior. The viscosity of bacteria and EPS was 1.55-3.80 cP and 1.10-2.40 cP, respectively, while the attachment of bacteria (optical density at 600 nm) was 0.1426-3.1015. Bacteria with high attachment secreted EPS with a higher viscosity (2.40 cP), whereas those with weak attachment expressed EPS with a lower viscosity (1.10 cP). Viscosity and microbial attachment or extracellular polysaccharide (PS) content were significantly positively correlated. PS content was the source of bacterial viscosity, and β-polysaccharide played a more important role in viscosity and microbial attachment than α-polysaccharide. Thus, viscosity plays a critical role in microbial attachment, and high viscosity and PS content result in high microbial attachment, which is beneficial to the granulation process of AGS.