A detailed investigation of whey protein isolate solutions and gels reveals a number of novel characteristics

Understanding of formation, gastrointestinal breakdown, and application of whey protein emulsion gels: Insights from intermolecular interactions

Whey protein emulsion gel is an ideal model food for revealing how the multilength scale food structures affect food digestion, as their structure and mechanical properties can be precisely manipulated by controlling the type and intensity of intermolecular interactions between protein molecules. However, there are still significant understanding gaps among intermolecular interactions, protein aggregation and gelation, emulsion gel formation, gel breakdown in the gastrointestinal tract (GIT), and the practical use of whey protein emulsion gels, which limits their GIT-targeted applications. In this regard, the relationship between the structure and digestion behavior of heat-set whey protein emulsion gels is reviewed and discussed mainly from the following aspects: (1) structural characteristics of whey protein molecules; (2) how different types of intermolecular interactions influence heat-induced aggregation and gelation of whey protein in the aqueous solutions and the oil-in-water emulsions, and the mechanical properties of the final gels; (3) functions of the mouth, the stomach, and the small intestine in processing of solid foods, and how different types of intermolecular interactions influence the breakdown properties of heat-set whey protein emulsion gels in GIT (i.e., their respective role in controlling gel digestion). Finally, the implications of knowledge derived from the formation and gastrointestinal breakdown of heat-set whey protein emulsion gels for developing controlled delivery vehicles, human satiety enhancers, and sensory modifiers are highlighted.

Fabrication of high strength cold-set sodium alginate/whey protein nanofiber double network hydrogels and their interaction with curcumin

Enhancing the bio-based hydrogels strength is fundamental to extend their engineering applications. In this study, high strength cold-set sodium alginate/whey protein nanofiber (SA/WPN) double network hydrogels were prepared and their interaction with curcumin (Cur) was studied. Our results indicated that the rheological and textural properties of SA/WPN double network hydrogels were enhanced with increasing WPN by forming SA-COO^--Ca²⁺-^-OOC-WPN bridge through electrostatic interactions. The storage modulus (768.2 Pa), hardness (273.3 g), adhesiveness (318.7 g·sec) and cohesiveness (0.464) of SA/WPN50 (WPN concentration of 50 mg/mL) double network hydrogels were 3.75, 2.26, 3.76 and 2.19 times higher than those of SA hydrogels, respectively. Cur was combined with SA/WPN hydrogels through hydrogen bonding, van der Waals forces and hydrophobic interactions with an encapsulation efficiency of 91.6 ± 0.8 %, and the crystalline state was changed after binding. In conclusion, SA/WPN double network hydrogels can be enhanced by the addition of WPN and have potential as carriers for hydrophobic bioactive substances.

Protein-protein interactions explain the temperature-dependent viscoelastic changes occurring in colloidal protein gels

Denaturation of protein solutions can be induced by higher temperatures and the presence of non-polar organic solutions. The denatured proteins form aggregates and gels through protein interactions occurring between their amino acid side chains. Depending on the involved side chains, the denaturation conditions lead to different gel properties. As model systems, a variety of food proteins were gelled through different mechanisms to cover a whole range of protein-protein interactions. Especially the temperature dependence of the viscoelastic properties in a simple rheometer method was found to be very different. These differences could be explained by the different thermodynamic properties of the involved protein-protein interactions. Electrostatic interactions were shown to weaken the resulting gel upon temperature increase whereas entropically driven interactions such as hydrophobic or covalent links were strengthened with increased temperatures. A proposed model explaining these results can be used to assess protein interactions in hydrogels in a non-invasive way and could also have applications to describe the temperature behavior of other hydrogels.

Ionic strength and buffering capacity of emulsifying salts determine denaturation and gelation temperatures of whey proteins

Ionic conditions affect the denaturation and gelling of whey proteins, affecting the physical properties of foods in which proteins are used as ingredients. We comprehensively investigated the effect of the presence of commonly used emulsifying salts on the denaturation and gelling properties of concentrated solutions of β-lactoglobulin (β-LG) and whey protein isolate (WPI). The denaturation temperature in water was 73.5°C [coefficient of variation (CV) 0.49%], 71.8°C (CV 0.38%), and 69.9°C (CV 0.41%) for β-LG (14% wt/wt), β-LG (30% wt/wt), and WPI (30% wt/wt), respectively. Increasing the concentration of salts, except for sodium hexametaphosphate, resulted in a linear increase in the denaturation temperature of WPI (kosmotropic behavior) and an acceleration in its gelling rate. Sodium chloride and tartrate salts exhibited the strongest effect in protecting WPI against thermal denaturation. Despite the constant initial pH of all solutions, salts having buffering capacity (e.g., phosphate and citrate salts) prevented a decrease in pH as the temperature increased above 70°C, resulting in a decline in denaturation temperature at low salt concentrations (≤0.2 mol/g). When pH was kept constant at denaturation temperature, all salts except sodium hexametaphosphate, which exhibited chaotropic behavior, exhibited similar effects on denaturation temperature. At low salt concentration, gelation was the controlling step, occurring up to 10°C above denaturation temperature. At high salt concentration (>3% wt/wt), thermal denaturation was the controlling step, with gelation occurring immediately after. These results indicate that the ionic and buffering properties of salts added to milk will determine the native versus denatured state and gelation of whey proteins in systems subjected to high temperature, short time processing (72°C for 15 s).

WPI Gel Microstructure and Mechanical Behaviour and Their Influence on the Rate of In Vitro Digestion

The influence of microstructure and mechanical properties on the in vitro digestibility of 15% whey protein isolate (WPI) gels was investigated. Gels were prepared via heat set gelation at three pH values (pH 3, 5 and 7), which produced gels with distinct microstructures and mechanical properties. The gels were minced to simulate an oral/chewing phase, which led to the formation particles of various sizes and textures. The minced gels were passed through either an Infogest (pre-set pH of 3) or Glass stomach (dynamic pH) protocol. Gels were digested in the gastric phase for up to 120 min, at which point the extent of digestion was measured by the amount of filterable nitrogen passing through a sieve. The digesta from both gastric methods were passed through an in vitro simulated intestinal phase. A strong link was found between the elasticity of the initial gel and the gel particle size following simulated oral processing, which significantly (p < 0.01) affected the rate of digestion in the gastric phase. A weaker correlation was also found between the pH of the gels and the extent of gastric digestion. This work highlights the differences in the rate of gastric digestion, arising from oral processing, which can be attributed to the material properties of the substrate.

Preparation, characterization, and antioxidant activity of zein nanoparticles stabilized by whey protein nanofibrils

The application of natural biopolymers to develop colloidal carriers for delivering hydrophobic bioactive molecules has become one of the hottest topics in food science. In this study, a simple pH-driven method to prepare whey protein nanofibrils stabilized zein nanoparticles was developed. The formation, structure, intermolecular interactions, rheological properties, in vitro digestion, and antioxidant activity of the nanoparticles were investigated. When the mass ratio of zein and whey protein nanofibrils was 1:0.8, the hydrodynamic diameter and zeta potential of the nanoparticles were 413 nm and - 25 mV, respectively. Transmission electron microscope photographs showed that the nanoparticles were a spherical core-shell structure. Fourier transform infrared spectroscopy and surface hydrophobicity measurements indicated that whey protein nanofibrils adsorbed to the surface of zein aggregates through hydrogen bonding and hydrophobic interactions. Differential scanning calorimetry tests confirmed the formation of nanoparticles improved the thermal stability of zein and whey protein nanofibrils. The nanoparticles exhibited less shear-thinning behavior with low apparent viscosity, and it can't be degraded in simulated gastric fluid but can be in simulated intestinal fluid. The antioxidant activity of the nanoparticles was increased by in vitro antioxidant assay when compared to whey protein nanofibrils. This new technology to develop zein-whey protein nanoparticles may be used for preparing nanoparticles of other similar hydrophobic food ingredients. And the findings of this study may provide a theoretical basis for preparation of nanoparticles as a nutrient delivery system.

Effect of sodium triphosphate on particle size of heat-induced whey protein concentrate aggregates

Thermal treatment has been utilized to improve the functional properties of proteins for many years. In this study, we aimed to investigate the effect of sodium triphosphate (Na5P3O10) on particle size and size distribution of heat-induced whey protein concentrate (WPC) aggregates under different processing conditions. The results showed that high Na5P3O10 level (>0.5%, w/w), long heating time (>15 min), and alkaline condition (pH 8-8.5) facilitated formation of large particles (>10 μm). The WPC aggregates with small-to-medium particle size (1-3 μm) that are suitable to be applied as a fat replacer were obtained by heating the WPC solution (8%, w/v) containing 0.4% (w/w) Na5P3O10 at 85°C for 5 min. We conclude that thermal treatment of whey protein concentrate added with Na5P3O10 can obtain whey protein products with different particle sizes for certain applications.