Molecular rearrangement of Laird lentil (Lens culinaris Medikus) starch during different processing treatments of the seeds

Effect of ultrafine grinding on the structure and physical properties of pregelatinized rice starch

This study used a combination method of ultrafine grinding and pregelatinization to modify rice starch (RS) to delay its retrogradation and provide a rationale for prolonging rice product shelf life. The structure and physicochemical properties of the pregelatinized ultrafine grinding rice starch (PURS) were compared with those of RS, ultrafine grinding rice starch (URS), and pregelatinized rice starch (PRS). The microstructure, molecular weight, branched starch length distribution, short-range order, crystal structure, and physical properties of RS, URS, PRS, and PURS were analyzed, respectively. Results showed that RS, URS, PRS, and PURS granules exhibited similar spherical or polygonal shapes, and the content of amylose and short-branched starch in PURS increased compared with RS, URS, and PRS. Furthermore, the cross-polarization of PRS and PURS disappeared. Long-chain amylopectin and average molecular weight of PURS decreased significantly after ultrafine grinding. Our study suggested reduced breakdown value and setback value and improved gel stability, and PURS was beneficial for delaying retrogradation compared to RS, URS, and PRS. The ultrafine grinding method improved the water swelling capacity (WSC), solubility, pasting properties, and gelation properties of PRS. The hardness of PURS was reduced by ultrafine grinding. These suggest that the combination of ultrafine grinding and pregelatinization could improve the properties of RS. Pearson's correlation analysis showed that the structure of PURS significantly influenced the physicochemical properties. The present study was helpful in better understanding the importance of ultrafine grinding in improving the anti-retrogradation of PURS and provided new insights into extending the shelf life of rice products by ultrafine grinding and pregelatinization.

Controlling sodium chloride concentration modulates the supramolecular structure and sol features of wheat starch-acetylated starch binary matrix

The sol performance of wheat starch (WS) matrix incorporating acetylated starch (AS) is crucial for the processing and quality features of wheat products. From a supramolecular structure view, how regulating salt (sodium chloride) concentration modulates the sol features, e.g., pasting, zero-shear viscosity (ZSV) and thixotropy of WS-AS binary matrix was explored. Compared to the salt-free counterpart, the saline matrices exhibited a delayed pasting profile and a decreased viscoelasticity. Thereinto, the sol at 0.02 M NaCl exhibited the smallest ZSV (23,710 Pa·s) and the greatest in-shear recovery ratio (33.7 %). Such variations could be attributed to the weakened coil-helix, nematic-smectic and isotropy-anisotropy transitions from a side-chain liquid-crystalline perspective. Meanwhile, the correlation length (ξ) and radius of gyration (Rg) obtained from small angle X-ray scattering analysis were increased by 5.2 and 9.6 Å respectively, which disclosed a restrained entanglement and an enhanced chain mobility. These results would provide a reference for the design of fluid/semisolid products with optimized qualities.

Developing high resistant starch content rice noodles with superior quality: A method using modified rice flour and psyllium fiber

The effects of high-resistant starch (RS) content rice flour, psyllium husk powder (PHP), and psyllium powder (PP) on the edible quality and starch digestibility of rice noodles were investigated in this study. High-RS rice noodles showed lower digestibility but poor edible quality. With the addition of PHP and PP, high-RS rice noodles' cooking and texture quality were improved significantly, especially the breakage rates, cooking losses, and chewiness (P < 0.05). Compared to traditional white rice noodle's estimated glycemic index (eGI) of 86.69, the eGI values for 5PHP-RN and 5PHP-2PP-RN were significantly decreased to 66.74 and 65.77, achieving a medium GI status (P < 0.05). This resulted from the high amylose and lipid content in the modified rice flour and psyllium, leading to increase of starch crystallinity. Besides, based on the analysis of Pearson's correlation, it can be found that PHP rich in insoluble dietary fiber (IDF) could improve high-RS noodle cooking and texture quality better, while PP rich in soluble dietary fiber (SDF) can further reduce the RDS content and its starch digestibility. Therefore, utilizing modified rice flour with an appropriate addition of PHP and PP can be considered an effective strategy for producing superior-quality lower glycemic index rice noodles.

The multi-scale structures and in vitro digestibility of starches with different crystalline types induced by dielectric barrier discharge plasma

The effects of plasma treatment on multi-scale structures and in vitro digestibility of starches isolated from Tartary buckwheat (TBS), potato (PTS), and pea (PS), were investigated. The results from SEM and CLSM showed that plasma treatment resulted in the extension of pores from the starch hilum to the surface. The XRD and 13C CP/MAS NMR spectra demonstrated that the crystalline type of three starches was not changed by plasma treatment, while the RC and double helix content of TBS increased. Besides, the single helix content and the proportion of amorphous phase decreased following the treatment, which was consistent with the result of SAXS. However, the PTS and PS showed the opposite results by plasma treatment. In addition, the modification significantly changed the molecular weight (Mw) and chain length distribution of all the starches, among which the Mw of PTS fell drastically from 2.45 × 107 g/mol to 1.74 × 107 g/mol. The in vitro digestibility of starches increased significantly when treated with plasma, in which TBS exhibited the biggest increase for its inside-out and side-by-side digestion manners. Therefore, plasma treatment led to different alteration trends for multi-scale structures with quite various change extent for in vitro digestibility about different crystalline starches.

Effects of frying on the surface oil absorption of wheat, potato, and pea starches

The effects of structural changes on surface oil absorption characteristics of wheat starch, pea starch and potato starch during frying under different water content (20%, 30%, 40%, 50%) were studied. Fried potato starch with a 40% water content exhibited the highest surface oil content. When the initial moisture content reached 30%, the scattering intensity of the crystal layer structure decreased for wheat and pea starches, while the scattering peak for potato starch completely disappeared. At 40% moisture content, the amorphous phase ratio values for fried potato, wheat and pea starches were 13.50%, 11.78% and 11.24%, respectively, and the nitrogen adsorption capacity of fried starch decreased in turn. These findings that the structure of potato starch was more susceptible to degradation compared to pea starch and wheat starch, resulting in higher surface oil absorbed by potato starch during frying process.

Physicochemical properties, anti-nutritional and bioactive constituents, in vitro digestibility, and techno-functional properties of bioprocessed whole wheat flour

This study investigated the impact of bioprocessing techniques (germination, solid-state fermentation, the combination of germination, and solid-state fermentation) on the physicochemical properties, anti-nutritional and bioactive constituents, in vitro digestibility, and techno-functional properties of whole wheat grains were investigated. Bioprocessed whole wheat flour (WWF) samples and the raw flour (control) were prepared using standard procedures. Proximate, anti-nutritional, mineral and amino acid (AA) compositions, protein digestibility, antioxidant activities, starch characteristics, and techno-functional properties were studied using standard methods. The bioprocessing methods increased (p ≤ 0.05) the protein (13.37-16.84 g/100 g), total dietary fiber, mineral constituents, resistant starch (7.19-9.87 g/100 g), slowly digestible starch, phenolic content, antioxidant activities (ferric reducing antioxidant power (FRAP) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity), most AAs, and protein digestibility. Also observed were decreases (p ≤ 0.05) in rapidly digestible starch, phytic acid, tannin, and trypsin inhibitor activity. The adopted bioprocessing techniques modified the thermal, functional, color, and pasting properties of the WWF and resulted in molecular interactions in some functional groups, as revealed by Fourier transform infrared spectroscopy, compared to the raw flour. The combination of germination and fermentation improved the physicochemical (titratable acidity = 4.93%), protein (16.84/100 g) and starch digestibility (resistant starch = 9.87%), antioxidant (FRAP = 78.90 mg/GAE/100 g), and mineral contents (calcium = 195.28 mg/100 g), modified the pasting (peak viscosity = 90.34 RVU), thermal (peak temperature = 64.82°C), and color properties of WWF with reduced anti-nutritional factors. The combination of these processing techniques could serve as a natural and low-cost technique for the modification of whole wheat functionality and subsequently as an improved functional ingredient during food product development.

Structural modification of starch and protein: From the perspective of gelatinization degree of oat flour

To clarify the relationship between gelatinization degree and structure characteristics, oat kernels were roasted to different gelatinization degree of 15 %-90 % based on tempering water content of 22.5 %-35 %, and the structure characteristics of starch and protein were evaluated. The results showed that the increased gelatinization degree dependent on tempering water content promoted protein aggregation on the surface of starch particles, forming larger aggregates with molecular weight >100 kDa. Oat kernels presented a dense starch gel network structure induced by gelatinized starch. Partial gelatinization of starch led to a decrease in pasting viscosities (setback viscosity, 3.91 Pa·s-1.59 Pa·s) and enthalpy (5.12 J/g-0.11 J/g). With the increase of gelatinization degree, the starch crystal structure conversed from A + V type to V type, accompanied by the formation of starch-lipid complexes and a decrease of relative crystallinity (22.28 %-8.72 %). Moreover, 50 % gelatinized oat flour possessed the highest β-sheet structure (38.04 %), but a decrease in surface hydrophobicity and an increase in endogenous fluorescence intensity were found in oat flour of gelatinization degree >50 %. This study provided a theoretical reference for the application of oat flour with different gelatinization degrees to match suitable products.

Structural and property changes of starch derivatives under microwave field: A review

Native starches are commonly modified for desired properties because of their limited applications. Among various modifications, microwave irradiation has been gaining strong interests and becoming a focal area to transform starch during the last few years. Such interests reside in microwave irradiation's high heating rates, lesser extent of loss in nutritional qualities, and so on when compared with other approaches. This review summaries the effects of microwave field on the structural (e.g. morphology characteristic, lamellae structure, crystallinity, and molecular structure) and physicochemical properties (e.g. pasting properties and gelatinization) of naturally existing starch derivatives. Different microwave-assisted chemical derivatizations can directly or indirectly affect starch structure from the macroscopic to the microscopic level, thereby resulting in various functionalities. Moreover, conventional starch modification processes can be optimized by applying microwave irradiation to obtain modified starch with high degree of substitution and low viscosity. The future research will help to better understand the structural changes of microwave-assisted starch chemical derivatization and thereby creating a wide range of functionalities.

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Glutenin-gliadin ratio changes combining heat-moisture treatment significantly influences the in vitro digestibility of starch in recombinant wheat flours

This study aimed to investigate the effect of heat-moisture treatment (HMT) on the in vitro digestibility of recombinant wheat flours characterizing by gluten proteins differ in glutenin-gliadin ratio. Compared with the untreated flours in our previous study, HMT improved the digestion resistance of starch in flours with different glutenin-gliadin ratios. For the HMT strong-gluten flour, the proportional increase of glutenin led to an excessively strong and fragile gluten network that unstable under HMT, which weakened the wrapping of gluten network around starch granules and reduced the long- and short-range order of starch, resulting in the conversion of resistant starch (RS) and slowly digestible starch (SDS) to rapidly digestible starch (RDS); however, the quantitative increase of gliadin induced the conversion of SDS to RS due to the enhanced protein-starch interactions as well as the improved long- and short-range order of starch during HMT. For the HMT weak-gluten flour, the changes of glutenin-gliadin ratio aggravated the broken of protein network and starch granules during HMT, thus improving the starch digestibility in varying degrees. In conclusion, the relative crystallinity of starch mainly affected the content of resistant starch, while the content of slowly digestible starch was more influenced by protein-starch interactions.

Multi-Scale Comparison of Physicochemical Properties, Refined Structures, and Gel Characteristics of a Novel Native Wild Pea Starch with Commercial Pea and Mung Bean Starch

In the present study, the morphology, refined structure, thermal properties, and dynamic rheological, texture, and digestive properties of common vetch starch, a potential new type of legume starch, were systematically investigated, and compared with commercially available pea and mung bean starch. The results showed that the composition and chemical structure of common vetch starch were similar to the pea and mung bean starch. However, the amylose content (35.69), A-chain proportion (37.62), and relative crystallinity (34.16) of common vetch starch were higher, and the particle size and molecular weight (44,042 kDa) were larger. The value of pasting properties and enthalpy change (ΔH) of gelatinization of common vetch starch was lower and higher than mung bean and pea starch, respectively, and a lower swelling power and pasting index indicate that common vetch starch had higher hot-paste and cold-paste stability. In addition, common vetch starch gel exhibited good rheology, cohesiveness, and anti-digestive properties. These results provide new insights into the broader application of common vetch starch.

Changes in morphological and structural characteristics of high amylose maize starch in alkaline solution at different temperatures

In this study, high amylose maize starch(HAMS)was treated by Hydrothermal-alkali. SEM, SAXS, XRD, FTIR, LC-Raman, ¹³C CP/MAS NMR, GPC and TGA were used to study the changes in the granules and structure of HAMS. The results show that the granule morphology, lamellar structure, and birefringence of HAMS remained intact at 30 °C and 45 °C. With increasing temperature, the starch granules are fragmented, and the crystallinity, DD, FWHM values, molecular weight, and thermal stability of HAMS decrease. The double helical structure dissociated, and the content of amorphous regions increased, indicating the from order to the disorder of the HAMS structure. A similar annealing behavior occurred in HAMS at 45 °C, with the rearrangement of amylose and amylopectin occurring. At 75 °C and 90 °C, the short-chain starch produced by chain breakage regroups to form an ordered double helix structure. In general, the granule structure level of HAMS was damaged to different degrees at varying temperatures. HAMS showed gelatinization behavior in alkaline solutions when the temperature is 60 °C. This study expects to provide a model for the gelatinization theory of HAMS systems.

Multi-Scale Structural Insights into Enzymatically Hydrolyzed Lentil Starch Concentrates Prepared by In Vitro Method Using Different Types of Enzymes

This study was undertaken to investigate the enzymatic hydrolysis of lentil starch concentrates from conventional cooked seeds (CCLSC) by the action of different types of enzymes, including pancreatin (PC-EHSC), heat-stable α-amylase (HS-EHSC), β-amylase (βA-EHSC), amyloglucosidase (AMG-EHSC), and multi-enzymes (βA-HS-AMG-EHSC); their multi-scale structural characteristics of the enzymatic hydrolysis products of lentil starch concentrates were compared. The morphological features distinguished among different samples. The Fourier-transform infrared spectroscopy and solid-state ¹³C CP/MAS NMR spectral features indicated the possible formation of a binary and ternary complex among amylose, protein and lipids. The X-ray diffraction results revealed that the V-type characteristic diffraction peaks were more obvious for samples including PC-EHSC and βA-EHSC, which was in line with their lowest polydispersity index (DP_n). PC-EHSC and βA-EHSC also showed an increased peak intensity of the scattering maximum on the small-angle X-ray scattering spectra, whereas CCLSC exhibited an overall lower peak intensity within the studied q range of scattering. The highest XRD crystallinity and the lowest DP_n value obtained for PC-EHSC indicated that the starch polymers modified by pancreatin could produce glucan chains with a comparatively homogenous M_w distribution that are readily recrystallized by hydrogen bonding through chain aggregation. Comparatively, the lowest relative crystallinity for HS-EHSC obtained from XRD suggested that thermostable α-amylolysis was unfavorable for the formation of starch structure with a higher degree of molecular order. This study could provide useful information for the needed research to obtain a deeper understanding of the impact of different amylolysis actions on the structural organization of starch hydrolysates and to provide a theoretical foundation for the development of fermentable enzymatically hydrolyzed starch with well-tailored physiological properties.

The relationship between molecular structure and film-forming properties of thermoplastic starches from different botanical sources

To illustrate the correlations between molecular structures and the film-forming properties of thermoplastic starch from various botanical sources, starches from cereal, tuber and legume were modified by thermoplastic extrusion and the corresponding thermoplastic starch films were prepared including thermoplastic corn starch (TCS), thermoplastic rice starch (TRS), thermoplastic sweet potato starch (TSPS), thermoplastic cassava starch (TCAS) and thermoplastic pea starch (TPES) films. TPES film displayed a higher tensile strength (6.28 MPa) and stronger water resistance, such as lower water solubility (15.70 %), water absorption (42.35 %), and water vapor permeability (0.285 g·mm·h-1·m-2·kPa-1) due to higher contents of amylose and B1 chains. TCAS showed a smoother and more amorphous film due to higher amylopectin content, resulting higher elongation at break and larger opacity. TCS film was the most transparent due to a compacter network and more ordered crystallinity structure, which was suit for the packaging of fresh vegetables and aquatic products, whereas TCAS film was the opaquest, which protected package foods from light such as meat products, etc. The outcome would provide an innovative theory to regulate accurately the functional properties of thermoplastic starch films for different food needs.

Physicochemical properties and in vitro digestibility of proso millet starch modified by heat-moisture treatment and annealing processing

Heat-moisture treatment (HMT) and annealing (ANN) were applied to modify the proso millet starch, and then the physicochemical properties as well as the in vitro digestion of the modified starch were investigated systematically. Results indicated that HMT and ANN did not change the typical A-type crystallinity. However, both processes cause cracks and dents on the surface of the granule. The gelatinization temperature increased while peak viscosity value, relative crystallinity and gelatinization enthalpy of proso millet starch decreased significantly after HTM and ANN. Meanwhile, a remarkable increase of the slowly digestible starch(SDS) and resistant starch(RS) content was noticed after HTM and ANN modification (the highest content of SDS and RS after HTM and ANN were 9.52 ± 0.82 %, 12.03 ± 1.36 % and 12.15 ± 0.89 %, 8.75 ± 1.63 %, respectively). Those results indicated that the ANN and HMT processes could modify the physicochemical properties and in vitro digestion of proso millet starch efficiently and showed potential application to produce healthy starch food with lower digestion.

Correlation analysis on physicochemical and structural properties of sorghum starch

This manuscript analyzed physicochemical and structural properties of 30 different types of sorghum starches based on their apparent amylose content (AAC). Current results confirmed that sorghum starch exhibited irregular spherical or polygonal granule shape with 14.5 μm average particle size. The AAC of sorghum starch ranged from 7.42 to 36.44% corresponding to relative crystallinities of 20.5 to 32.4%. The properties of enthalpy of gelatinization (ΔH), peak viscosity (PV), relative crystallinity (RC), degree of double helix (DD), degree of order (DO), and swelling power (SP) were negatively correlated with AAC, while the cool paste viscosity (CPV) and setback (SB) were positively correlated with AAC. Correlations analyzed was conducted on various physicochemical parameters. Using principal component analysis (PCA) with 20 variables, the difference between 30 different types of sorghum starch was displayed. Results of current study can be used to guide the selection and breeding of sorghum varieties and its application in food and non-food industries.

Free and Bound Phenolics of Laird Lentil (Lens culinaris) Hulls and the Anti-inflammatory Activity of their Digestive Products via Crosstalk between NF-κB and Keap1-Nrf2 Signaling Pathways in HT-29 Cells

Polyphenol-rich Laird lentil hulls are a byproduct of lentil processing. In the present study, free and bound polyphenols in lentil hulls were analyzed with UHPLC-LTQ-OrbiTrap-MS², and the anti-inflammatory mechanism of their digestive products was explored based on the NF-κB and Keap1-Nrf2 signaling pathways in the HT-29 cell model. In summary, a total of 27 polyphenols and 5 nonphenolic constituents were identified in free and bound fractions, and among them, catechin glucoside, kaempferol tetraglucoside, procyanidin dimer, and dihydroxybenzoic acid-O-dipentoside were the main polyphenols in the digestive products. These digestive products could reduce inflammatory mediators and exert anti-inflammatory activity by inhibiting NF-κB and activating Keap1-Nrf2 signaling pathways, and there was crosstalk between them, which was a mutual inhibition effect. The results show that polyphenols in lentil hulls are a good source of anti-inflammatory ingredients and have a promising development potential.

Understanding the texture and digestibility attributes of rice noodles supplemented with common vetch starch

The effects of common vetch starch (CVS) substitution on rice noodle quality were investigated, aiming to improve their texture and reduce starch digestibility. The CVS had larger granule sizes, higher amylose content and more long branch chains compared with rice starch (RS). When the CVS substitution level was 20 %, the rice noodles had the best texture quality, as the mixtures with more total starch and amylose could form denser gel structures. Moreover, the starch chains were easier to rearrange to form double helix ordered structures, resulting in a slower digestion rate. With the further increase of CVS, the noodle structure weakened and the starch digestion rate increased. This was due to the formation of looser gel structures and less ordered structures as RS granules could be easily separated into different parts by large amount of CVS with larger granule sizes, and RS with more short chains tended to be cross-linked with RS during retrogradation. With increasing CVS substitution level, the estimated glycemic index (eGI) of rice noodles decreased and then tended to be stable. Therefore, appropriate CVS substitution could improve the texture quality of rice noodles and reduce the eGI value, and the best substitution level was 20 %.

Effects of Extraction Methods on Physicochemical and Structural Properties of Common Vetch Starch

Three extraction methods: water extraction, lactic acid bacteria fermentation, and back-slopping fermentation were applied to extract a new type of legume starch, common vetch starch. Our results showed that the lactic acid bacteria fermented starch had the highest amylose content (35.69%), followed by the back-slopping fermented starch (32.34%), and the water-extracted starch (30.25%). Furthermore, erosion surface, lower molecular weight, smaller particle size, larger specific surface area, and a higher proportion of B1 chain were observed in the fermented starch, especially in the back-slopping fermented starch. All the extracted starches showed a type C structure, but a type C_B structure was observed in the back-slopping fermented starch. In addition, the relative crystallinity of the lactic acid bacteria fermented starch (34.16%) and the back-slopping fermented starch (39.43%) was significantly higher than that of the water-extracted starch (30.22%). Moreover, the swelling power, solubility, pasting, and thermal properties of the fermented starches were also improved. In conclusion, the fermentation extraction method, especially back-slopping fermentation, could improve the quality of the extracted common vetch starch when compared with the traditional water extraction method.

Multi-scale structures and physicochemical properties of waxy starches from different botanical origins

The multi-scale structures and physicochemical relationships of three different types of waxy starches (maize, tapioca, and potato) were investigated. The maize and tapioca starches exhibited A-type crystalline polymorph compared to potato starch (B-type). The WMS showed higher amorphous content (5.56 %) than other waxy starches. The WTS exhibited a low tendency of retrogradation with its high f_a (DP 6-12) and low f_b3 (DP ≥ 37) proportion of chains. Double helix content of WPS was observed highest with a high pasting viscosity (952.3 BU). Low f_a (DP 6-12) and high f_b3 (DP ≥ 37) chain proportions of the WPS retrograded easily. The compactness of the semi-crystalline aggregation structure influenced the retrogradation properties of waxy starches with a positive correlation. Furthermore, the peak viscosity of pastes was correlated with the proportion of f_b3 (DP ≥ 37) chains, mass fractal dimension, and double helix content. The results provide guidance to design the application of waxy starches in the production of clean-labels.

Twin-Screw Extrusion of Oat: Evolutions of Rheological Behavior, Thermal Properties and Structures of Extruded Oat in Different Extrusion Zones

Further investigation of material properties during the extrusion process is essential to achieve precise control of the quality of the extrudate. Whole oat flour was used to produce low moisture puffed samples by a twin-screw extruder. X-ray diffraction (XRD), Scanning electron microscopy (SEM), infrared spectroscopy (FTIR), thermal analysis, and rheological experiments were used to deeply characterize changes in the structure and cross-linking of oats in different extrusion zones. Results indicated that the melting region was the main region that changed oat starch, including the major transformation of oat starch crystal morphology and the significant decrease of enthalpy representing the starch pasting peak in the differential scanning calorimeter (DSC) pattern (p < 0.05). Moreover, the unstable structure of the protein increased in the barrel and then decreased significantly (p < 0.05) after being extruded through the die head. The viscosity of oats increased in the cooking zone but decreased after the melting zone. A transformation occurred from elastic-dominant behavior to viscoelastic-dominant behavior for oats in the melting zone and after being extruded. This study provides further theoretical support for the research of the change of materials during extrusion and the development of oat-based food.

Anti-hyperlipidemic and ameliorative effects of chickpea starch and resistant starch in mice with high fat diet induced obesity are associated with their multi-scale structural characteristics

Chickpea starches were isolated from both untreated (UC-S) and conventionally cooked seeds (CC-S), and their multi-scale structural characteristics and in vivo physiological effects on controlling hyperlipidemia in high fat diet induced obese mice were compared with their corresponding resistant starch (RS) fractions obtained by an in vitro enzymatic isolation method (UC-RS and CC-RS). The degree of order/degree of double helix in Fourier transform infrared spectroscopy was in the following order: CC-RS > UC-RS > CC-S > UC-S, which was consistent with the trend observed for relative crystallinity and double helix contents monitored by X-ray diffractometer and solid-state ¹³C cross-polarization and magic angle spinning NMR analyses. The influence of different types of chickpea starch and their corresponding resistant starch fractions on regulating the serum lipid profile, antioxidant status, and histopathological changes in liver, colon and cecal tissues, and gene expressions associated with lipid metabolism, gut microbiota, as well as short-chain fatty acid metabolites in mice with high fat diet induced obesity was investigated. The results showed that the chickpea RS diet group exhibited overall better anti-hyperlipidemic and ameliorative effects than those of the starch group, and such effects were most pronounced in the CC-RS intervention group. After a six-week period of administration with chickpea starch and RS diets, mice in the UC-RS and CC-RS groups tended to have relatively significantly higher levels (P < 0.05) of butyric acid in their fecal contents. The 16S rRNA sequencing results revealed that mice fed with CC-RS showed the greatest abundance of Akkermansia and Lactobacillus compared with the other groups.

Effect of Fermentation Time on Molecular Structure and Physicochemical Properties of Corn Ballast Starch

The effect of fermentation treatment on the surface morphology, crystal structure, molecular weight, chain length distribution, and physicochemical properties of corn starch was investigated using natural fermentation of corn ballast. The amylose content in corn ballast starch reduced at first after natural fermentation, then grew, following the same trend as solubility. There were certain erosion marks on the surfaces of fermented corn ballast starch granules. The crystalline structure of corn ballast starch remained the same, i.e., a typical A-type crystalline structure, at different fermentation times; however, the intensities of diffraction peaks were different. The weight-average molecular weight of starch first increased and then decreased after fermentation. The content of low-molecular-weight starch (peak 3) decreased from 25.59 to 24.7% and then increased to 25.76%, while the content of high-molecular-weight starch (peak 1) increased from 51.45 to 53.26%, and then decreased to 52.52%. The fermentation time showed a negative correlation with the viscosity of starch, and the pasting temperature first increased, and then decreased. Natural fermentation can be used as a technical means to produce corn starch products as a result of the experiments' findings, and future experiments will detect and analyze the bacterial structure of corn fermentation broth in order to better understand the molecular mechanism of natural fermentation affecting the structure and physicochemical properties of corn starch.

Multi-scale structure of A- and B-type granules of normal and waxy hull-less barley starch

The multi-scale structure of combined (A- and B- type granules), A-type, and B-type granules from normal (NHB) and waxy hull-less barley (WHB) starch was studied, including crystalline structure, molecular branching, nanostructural and fractal characteristics. Particle size distribution was applied to determine the separation purity (>95%), and micrography was used to distinguish between the A-type and B-type granules. Lacking amylose, WHB had higher relative crystallinity, gelatinization temperature, enthalpy, level of scattering intensity and uniformity of orientation of double helices than NHB starch. Generally, B-type granules had higher gelatinization temperature, lower enthalpy, greater relative crystallinity, higher ratio of crystalline to amorphous region, more fa chains in amylopectin, and thicker semi-crystalline lamellae than A-type and combined granules. The results showed that the multi-scale structure of A-type and B-type granules differed greatly, and the characteristics of combined granules were not the same as those of its two constituent granule fractions.

Effects of Hydrothermal and Microwave Dual Treatment and Zein on the Enzymolysis of High Amylose Corn Starch

Resistant starch (RS) type 2-high-amylose corn starch (HACS) was subjected to simultaneous hydrothermal (25% moisture content, 90 °C for 12 h) and microwave (35% moisture content, 40 W/g microwaving for 4 min) treatment and zein (at a zein to treated starch ratio of 1:5, 50 °C for 1 h) to improve its resistance to enzymolysis. Scanning electron microscopy (SEM) highlighted the aggregation and adhesion of the composite. The average particle size of the composite (27.65 μm) was exceeded that of both the HACS (12.52 μm) and the hydrothermal and microwave treated HACS (hydro-micro-HACS) (12.68 μm). The X-ray diffraction results revealed that the hydro-micro-HACS and composite remained B-type, while their crystallinity significantly decreased to 16.98% and 12.11%, respectively. The viscosity of the hydro-micro-HACS and composite at 50 °C was 25.41% and 35.36% lower than that of HACS. The differential scanning calorimetry (DSC) results demonstrated that the composite displayed a new endothermic peak at 95.79 °C, while the weight loss rate and decomposition temperature were 7.61% and 2.39% lower than HACS, respectively. The RS content in HACS, the hydro-micro-HACS, and composite was 47.12%, 57.28%, and 62.74%, respectively. In conclusion, hydrothermal and microwave treatment combined with zein provide an efficient physical strategy to enhance the RS type 2-HACS.

Structural modification and dynamic in vitro fermentation profiles of precooked pea starch as affected by different drying methods

Pea starch was pre-cooked before being subjected to different drying treatments including oven-drying, infrared-drying, microwave-drying and freeze-drying. Different dried pea starch samples were then anaerobically fermented by human gut microbiota. Their structural features, morphological changes, the synthesis of short-chain fatty acids, as well as the microbiological responses during the 24 h in vitro human fecal fermentation were determined. Oven-dried pea starch (ODPS) displayed relatively stronger fluorescence intensity on the confocal laser scanning microscopic images, which was in qualitative agreement with its significantly highest crystallinities obtained from X-ray diffractogram (XRD) and 13C cross-polarization magic angle spinning (13C CP/MAS) NMR. The obtained results demonstrated that the significant differences in structural and morphological features observed for these four dried starch samples originate from different evaporation patterns of water molecules. Changes in R1047/1022 and R995/1022 during in vitro colonic fermentation corresponded well with the transition in relative crystallinity obtained from XRD and 13C CP/MAS NMR measurements, suggesting an increase in the molecular order upon starch utilization by the gut bacteria. The correlation analysis indicated that the dried starch with higher degree of short-range ordered structure was beneficial for the growth of Firmicutes, whereas starch substrate with a relatively loose granular structure would be beneficial for the growth of Bacteroides. The significantly highest operational taxonomic unit level of Bifidobacterium species after the fermentation of ODPS corresponded well with its highest propionate and butyrate concentration. The results obtained are expected to help food processors to tailor the drying method during the manufacture of processed starch samples with desirable structural features and prebiotic properties.

Effects of microwave treatments and retrogradation on molecular crystalline structure and in vitro digestibility of debranched mung-bean starches

The objective of this study was to investigate morphology, molecular crystalline structure, and digestibility of debranched mung bean starches with or without microwave treatment and retrogradation at different temperature. The mung bean starch was firstly debranched with pullulanase, and then the debranched starch containing 20% moisture content was treated by microwave irradiation for 3 min with or without further retrograded at +25, +4, or -18 °C for 24 h. All treated starches exhibited the B + V-type crystalline polymorph as determined by the XRD and the ¹³CNMR. The FT-IR results showed that the debranched starches had lower degree of order but higher degree of double helix than those of the native starch. The microwave treatment or further recrystallization of the debranched starch for more 24 h significantly improved crystalline structure of starch granules with higher degree of relative crystallinity, degree of order, and degree of double helices. The resistant starch content of the treated starch was in a range of 39.7-52.8%, significantly higher than that of the native starch (15.6%). As a result, the microwave-assisted debranched starch with further crystallization for 24 h was found to have highly ordered structure of granules, which highly resisted to the enzyme digestion.

Effects of different moisture contents on the structure and properties of corn starch during extrusion

Herein, corn starch samples with different moisture contents (native corn starch, 30, 35, 40, 45, and 50%) were prepared by twin-screw extrusion, and the structural and physical properties were analyzed and correlated. Scanning electron microscopy observed the morphology, attenuated total reflection-Fourier transform infrared spectroscopy investigated the double helix structure, X-ray diffraction analyzed the crystal region, ion chromatography observed the chain length distribution, and rapid viscosity analyzer measured the viscosity of corn starch samples. We found that the corn starch crystallinity, degree of order, and double helix degree decreased with increasing moisture content. The moisture content has a crucial role in the peak viscosity, breakdown, final viscosity, and setback in pasting property experiments. With the increase in moisture content, the longer chain was transformed into a shorter chain, and the dispersion of molecular weight distribution continuously increased. This study provides a theoretical basis for the production of extruded corn starch.

Physical modification on the in vitro digestibility of Tartary buckwheat starch: Repeated retrogradation under isothermal and non-isothermal conditions

The effects of repeated retrogradation (RR, range from 1 to 3 times) at different temperatures (4 °C; 4/25 °C, with a 24 h interval; 25 °C) on the in vitro digestibility and structures of Tartary buckwheat starch (TS) were investigated in this study. Results demonstrated that TS treated by RR for 1 time under 4/25 °C contained the maximum content of slowly digestible starch (SDS, 35.25%); TS treated by RR for 3 times under 25 °C contained the maximum content of resistant starch (RS, 54.92%). As the increase of RR cycle times, the value of relative crystallinity, the ratios of 1047/1022 cm^-1 and 995/1022 cm^-1 increased, the starch pore wall thickened, and more smooth fragments appeared (observed by scanning electron microscope), while the value of melting temperature range trended to decrease. The crystallization type of TS changed from type "A" to a mixture of "B + V" after retrogradation treatment. Pearson correlation analysis revealed that the content of rapidly digestible starch (RDS) was negatively correlated with the ratio of 995/1022 cm^-1, transition temperatures, and enthalpy (P < 0.05). These results would supply a potential method for the preparation of starch with slow-digesting properties, also improve the utilization and expand the application of TS.

Thermal treatment of common beans (Phaseolus vulgaris L.): Factors determining cooking time and its consequences for sensory and nutritional quality

Over the past years, the shift toward plant-based foods has largely increased the global awareness of the nutritional importance of legumes (common beans (Phaseolus vulgaris L.) in particular) and their potential role in sustainable food systems. Nevertheless, the many benefits of bean consumption may not be realized in large parts of the world, since long cooking time (lack of convenience) limits their utilization. This review focuses on the current insights in the cooking behavior (cookability) of common beans and the variables that have a direct and/or indirect impact on cooking time. The review includes the various methods to evaluate textural changes and the effect of cooking on sensory attributes and nutritional quality of beans. In this review, it is revealed that the factors involved in cooking time of beans are diverse and complex and thus necessitate a careful consideration of the choice of (pre)processing conditions to conveniently achieve palatability while ensuring maximum nutrient retention in beans. In order to harness the full potential of beans, there is a need for a multisectoral collaboration between breeders, processors, and nutritionists.

Isolated Pea Resistant Starch Substrates with Different Structural Features Modulate the Production of Short-Chain Fatty Acids and Metabolism of Microbiota in Anaerobic Fermentation In Vitro

Resistant starches (RSs) with different structural features were isolated from both native and pullulanase-debranched and acid-hydrolyzed pea starches. Their microscopic changes, short-chain fatty acids (SCFA) composition, microbiota communities, and structural characteristics of the corresponding fermenta residues by the end of 24 h of the in vitro fermentation period were investigated. The microbial fermentation clearly caused numerous cracks and erosion on the RS granule surface. In comparison to the positive control, significantly higher levels of butyrate, propionate, and total SCFA were produced after 24 h of in vitro fecal fermentation when resistant starches were used as substrates. The RS substrates with different structural characteristics enabled varying growth of Bifidobacterium spp., Eubacterium spp., and Faecalibacterium spp. The discrepancy in microbiota communities associated with the differences in SCFA from the fermentation of RS with different structural features would be critical toward the rational design of foods containing resistant starch with targeted health benefits.

Effects of damaged starch on glutinous rice flour properties and sweet dumpling qualities

This study focused on exploring the effects of damaged starch on glutinous rice flour properties and sweet dumpling qualities. Glutinous rice flours with different damaged starch contents (2-8%) and the same particle size were prepared through sifting and blending of semidry-milled and dry-milled rice flour. The increase of damaged starch content led to an increase in elastic modulus (G'), viscous modulus (G″) and agglomeration of starch granules, and a decrease in peak viscosity, breakdown value and enthalpy change (ΔH). Among all the samples, the rice flour batters with damaged starch content 3% and 4% were more stable and structured, and rice flours with damaged starch content 2% and 3% showed better pasting properties. As for the sweet dumpling qualities, compact structure, weak water mobility, less water loss, slight cracking and desirable cooking and texture properties were observed in the sweet dumplings made from rice flour with damaged starch content of less than 5%. All the results demonstrated that glutinous rice flour with damaged starch content of less than 5% had good flour properties and was suitable for the production of sweet dumplings.

Structural rearrangement of native and processed pea starches following simulated digestion in vitro and fermentation characteristics of their resistant starch residues using human fecal inoculum

Pea starches, in both native (NPS) and retrograded-autoclaved forms (RAPS), were subjected to simulated gastrointestinal (GI) digestion in vitro, their multi-scale structural characteristics, morphological features, molecular distribution and thermal properties were characterized. A gradual increase in the short-/long-range crystallinity, melting enthalpy of gelatinization on increasing digestion time was observed for both the native and retrograded-autoclaved pea starch samples based on the X-ray diffraction, Fourier-transform infrared spectra, solid-state 13CNMR and differential scanning calorimetry measurements. It was especially noticed that the growth rate of crystallinity and double helices, as well as the decrease in Mw values were evidently greater for RAPS than for NPS. To investigate how different molecular fine structure of pea starch substrate affects the gut microbiota shifts and dynamic short-chain fatty acid profile, their resistant starch residues obtained from both native and retrograded-autoclaved pea starch after 8 h of simulated GI tract digestion was used as the fermentation substrate. The levels of acetate, propionate and butyrate gradually increased with the increasing fermentation time for NPS and RAPS. In comparison to the blank control (i.e., the group without the addition of carbohydrate), the fermented NPS and RAPS obviously resulted in an increased abundance of Firmicutes and Bacteroidetes, accompanied by a decrease in Proteobacteria, Actinobacteria and Verrucomicrobia. Both NPS and RAPS promoted different shifts in the microbial community at the genus level, with an increase in the abundance of Bacteroides, Megamonas and Bifidobacterium, as well as a reduction in the abundance of Fusobacterium, Faecalibacterium and Lachnoclostridium in comparison to the blank control samples.