Physicochemical and structural properties of composite gels prepared with myofibrillar protein and lecithin at various ionic strengths

Exploring the effect of pH-shifting on the gel properties and interaction of heat-induced Flammulina velutipes polysaccharide-porcine myofibrillar protein for improving the quality of Flammulina velutipes-pork patties

This study primarily investigated the impact of pH-shifting on the gel properties of Flammulina velutipes polysaccharide (FVP)-porcine myofibrillar protein (MPs) gels, aiming to improve the quality of Flammulina velutipes-pork patties. Our findings revealed that the water holding capacity (81.72 %), oil holding capacity (87.41 %), emulsion activity index (81.05 %), emulsion stability index (52.58 %), and rheological properties of FVP-MPs gels were all enhanced under optimal pH 9 conditions. Alkaline conditions led to a more compact structure, with hydrogen bond interactions and hydrophobic interactions being the primary molecular forces. The physicochemical and sensory properties of pork patties prepared at pH 9 were enhanced, with key odor active substances such as 1-Penten-3-ol, 1-Propanol-M and 2-Ethylbutanal-M contributing to an improved flavor. This study provides comprehensive insights into the gel properties and interaction behavior of FVP-MPs gels under varying pH conditions, highlighting the potential for enhancing meat product quality by incorporating Flammulina velutipes at optimal pH values.

Optimizing Tilapia-based surimi ink for 3D printing: Enhancing physicochemical properties and printability with Ulva powder

The elderly face malnutrition and dysphagia. 3D printing with high-protein surimi offers an innovative way to customize nutrition and texture of foods for the elderly. This study explored whether tilapia-based surimi ink (TBSI) with Ulva powder (UP, 0-3 %) could improve physicochemical properties and printability as an alternative to traditional pollock-based surimi ink (PBSI). TBSI showed a more uniform microstructure, greater water-holding capacity (WHC), and better printability with consistent extrusion than PBSI. Adding UP to TBSI promoted cross-linking and enhanced microstructure and WHC. Rheological analysis revealed that all inks exhibited shear-thinning behavior. UP increased complex viscosity, storage modulus, and loss modulus. Notably, UP above 2 % improved protein matrix uniformity, structural integrity, and printability, as confirmed by FT-IR and 3D printing tests. The hardness of steamed TBSI fish cake increased when infill density increased. This study highlights the potential of TBSI with UP for 3D printing to prepare personalized and elderly-friendly food.

Effect of chitosan on thermal gelling properties of pork myofibrillar protein and its mechanism

BACKGROUND

Previous studies have demonstrated that the addition of chitosan can improve the quality and functional properties of meat products. However, the underlying mechanism remains unclear. In this study, the effect and mechanism of the addition of chitosan on the gel properties of myofibrillar protein (MP) were investigated.

RESULTS

The results indicated that the gel strength and the water-holding capacity of MP-chitosan gel increased significantly when chitosan was added at 2.5-10 mg mL-1. Myofibrillar protein samples with 10 mg mL-1 added chitosan exhibited the highest elasticity and viscosity during gel formation and strengthening. The addition of chitosan also caused a modification in both the secondary and tertiary structure of MP, resulting in an enhanced exposure of hydrophobic and sulfhydryl groups in comparison with the control. Chitosan inhibited the conversion of immobilized water into free water and the formation of water channels during the thermal gelation process of MP. The denaturation enthalpy (ΔH) of myosin decreased as the concentration of chitosan exceeded 5 mg mL-1. The microstructure showed that the incorporation of chitosan (5-10 mg mL-1) facilitated the formation of compact and well organized MP gel networks.

CONCLUSION

The addition of chitosan can enhance the functional properties of meat protein and facilitate heat-induced gelation, making it a promising ingredient for improving the quality of processed meat products. © 2024 Society of Chemical Industry.

Insight into the effects of large yellow croaker roe (Larimichthys Crocea) phospholipids on the conformational and functional properties of pork myofibrillar protein

The large yellow croaker roe phospholipids (LYPLs), rich in polyunsaturated fatty acids, is a potential phospholipid additive for meat products. In this work, the effects of LYPLs on the structural and functional properties of myofibrillar protein (MP) were determined, and compared with egg yolk phospholipids (EYPLs) and soybean phospholipids (SBPLs). The results revealed that LYPLs, similar to SBPLs and EYPLs, induced a transformation in the secondary structure of MP from α-helix to β-sheets and random coils, while also inhibited the formation of carbonyl and disulfide bonds within MP. All three phospholipids induced MP tertiary structure unfolding, with the greatest degree of unfolding observed in MP containing LYPLs. The MP with LYPLs had the highest surface hydrophobicity, emulsification properties and gel strength. In addition, MP with LYPLs added also demonstrated superior rheological properties and water-holding capacity compared with SBPLs and EYPLs. In conclusion, adding LYPLs endowed MP with improved functional properties.

Enhancing the quality attributes of porcine myofibrillar proteins through low-frequency alternating magnetic field-assisted freezing

This study explores the potential of low-frequency alternating magnetic field-assisted freezing (LF-MFF) on enhancing the physicochemical stability and gelling performance of porcine myofibrillar proteins (MPs). We observed that LF-MFF markedly reduced oxidative denaturation of MPs compared to refrigerator freezing (RF), thus maintaining higher gel quality. Notably, LF-MFF treatment at 3-4 mT enhanced MPs' solubility, decreased turbidity, and lowered dityrosine content. LF-MFF at 4 mT also effectively minimized MPs' aggregation and degradation. Rheological measurements revealed that the storage modulus (G') and apparent viscosity of MPs treated with 3-4 mT LF-MFF are comparable to those of fresh samples (FS). Furthermore, LF-MFF at 3-4 mT significantly improved the water-holding capacity (WHC), whiteness, gel strength, and textural properties of MPs. The 3-4 mT LF-MFF was particularly effective in enhancing hydrophobic interactions and hydrogen bonding, thereby inhibiting water mobility and protecting microstructure of MPs gels. In summary, LF-MFF, especially at 4 mT, improved the gelation properties of MPs by reducing oxidative denaturation, providing significant insights for its application in the frozen meat industry.

Effect of sodium alginate and egg white protein combinations on the functional properties and structures of chicken myofibrillar protein

This research explored the influence of varying sodium alginate (SA) and egg white protein (EWP) ratios (1:2, 2:3, 1:1, 3:2, 2:1, v/v) on the structural and gel characteristics of chicken myofibrillar protein (MP) gels. The findings showed that containing SA and EWP significantly improved (P < 0.05) the water-holding capacity (up to 95.02 %) and whiteness of MP gels. With a 2:1 ratio of SA to EWP, the absolute value of zeta potential reached 17.3 mV, and the lowest cooking loss (16.98 %) was achieved, accompanied by a reduction in turbidity. The MP formulation incorporating a 2:1 ratio of SA to EWP demonstrated the highest hardness, chewiness, cohesiveness, and springiness (P < 0.05), as confirmed by the rheological analysis conducted under temperature sweep mode. As the SA content increased, there was a notable enhancement in both the storage modulus (G') and loss modulus (G″) of MP gel, indicating a strengthened cross-linking effect within the MP protein gel. FTIR and SEM analyses revealed a transformation from α-helix to β-sheet and the formation of a more uniform and dense gel structure due to non-covalent interactions. Overall, MP incorporating SA/EWP at a 2:1 ratio (v/v) has preferable gel properties. This study could provide a theoretical reference to enhance the gel attributes of chicken meat products in the industry through the utilization of SA and EWP.

Effect of two-stage low-temperature tempering process assisted by electrostatic field application on physicochemical and structural properties of myofibrillar protein in frozen longissimus dorsi of tan mutton

The effects of refrigerator tempering, two-stage low-temperature tempering (TLT), and a combination of TLT with electrostatic field tempering (TLT-1500/2000/2500/3000) on the physicochemical and structural properties of the myofibrillar protein (MPs) in Longissimus dorsi of Tan mutton were investigated. The results from differential scanning calorimetry and dynamic rheology indicated that TLT-2000/2500 had the least impact on the thermal stability of MPs. While the carbonyl and dityrosine contents of MPs in TLT-2000/2500 were the lowest, the total sulfhydryl content and Ca2+-ATPase activity were the highest, suggesting that TLT-2000/2500 preserved the properties of MPs more effectively. The smaller and uniformly distributed particle size, highest zeta potential, and SDS-PAGE analysis confirmed that TLT-2000/2500 had minimal impact on the aggregation and degradation of MPs. Additionally, results from surface hydrophobicity, Fourier transform infrared spectroscopy, intrinsic fluorescence, and UV second-derivative absorption spectra suggested that TLT-2000/2500 was more conducive to stabilizing the primary, secondary, and tertiary structures of MPs.

Influence of flaxseed-derived diglyceride-based high internal phase Pickering emulsions on the rheological and physicochemical properties of myofibrillar protein gels

The study aimed to investigate the influence of flaxseed-derived diglyceride-based high internal phase Pickering emulsions (HIPPE) at different levels (0%, 10%, 20%, 30%, 40%, and 50%) on the rheological and physicochemical properties of myofibrillar protein (MPs) gels. The study indicated that with increasing HIPPE levels, there was a significant increase in whiteness while a decrease in water-holding capacity. The gels with 10% HIPPE levels had higher ionic bonds, while those with 40% and 50% HIPPE levels showed higher hydrogen bonds. By increasing HIPPE levels in the formation of MP gels, the T2 relaxation time was found to decrease. Additionally, in all MP gels, G' values were significantly higher than G" values over time. Adding lower contents of HIPPE levels resulted in a more compact microstructure. These findings indicate that flaxseed-derived diglyceride-based HIPPEs could be utilized as fat substitutes in meat products to enhance their nutritional quality.

Modulation of the conformation, water distribution, and rheological properties of low-salt porcine myofibrillar protein gel influenced by modified quinoa protein

High-pressure homogenization modified quinoa protein (HQP) was added to porcine myofibrillar proteins (MP) to study its the influence on protein conformation, water distribution and dynamical rheological characteristics of low-salt porcine MP (0.3 M NaCl). Based on these results, the WHC, gel strength, and G' value of the low-salt MP gel were significantly improved with an increase in the added amount of HQP. A moderate amount of HQP (6%) increased the surface hydrophobicity and active sulfhydryl content of MP (P < 0.05). Moreover, the addition of HQP decreased particle size and endogenous fluorescence intensity. FT-IR results indicated that the conformation of α-helix gradually converted to β-sheet by HQP addition. The incorporation of HQP also shortened the T2 relaxation time and enhanced the proportion of immobile water, contributing to the formation of a compact and homogeneous gel structure. In conclusion, the moderate addition of HQP can effectively enhance the structural stability and functionality of low-salt MP.

Study on the gelling properties of egg white/surfactant system by different heating intensities

The aim of this study was to elucidate the different effects and difference mechanism of gelling properties among egg white (EW) treated with different heating intensities and the composite addition of rhamnolipid and soybean lecithin. Particle size analyzer, potentiometric analyzer, surface hydrophobicity method, and Fourier transform infrared spectroscopy techniques were used to determine the physicochemical properties and molecular structure, respectively. Low-field nuclear magnetic resonance, magnetic resonance imaging, texture profile analysis, and scanning electron microscopy techniques were used to analyze the gelling properties and gel structure, respectively. And we illuminate the different mechanisms in the gelling properties of the EW with various treatments and key internal factors that play important roles in improving gelling properties by establishing the link between the gelling properties and relevant characteristics by mixed effects model and visual network analysis. The results indicate raising the content of rhamnolipid decreased the migration of immobilized water in the EW gel and the free water content. At the heating intensities of 55 °C/3.5, 65 °C/2.5, and 67 °C/1.5 min, with an increase in rhamnolipid, the gel's cohesiveness, gumminess, and chewiness gradually increased. The mixed effects model indicated that heating intensities and composite ratios have a 2-way interaction on zeta potential, the relaxation time of bound water (T21), the content of bound water (P21), the content of immobilized water (P22), and fractal dimension (df) attributes (P < 0.05). The visual network analysis showed that the protein solubility, the relaxation time of immobilized water (T22), surface hydrophobicity, zeta potential, average particle size (d43) and the relaxation time of free water (T23) are critical contributors to the different gelling properties of EW subjected to various treatments and the improvement of gelling properties. This study will provide theoretical guidance for the development of egg white products and the expansion of egg white's application scope in the egg product processing industry.

Insight into the improvement mechanism of gel properties of pea protein isolate based on the synergistic effect of cellulose nanocrystals and calcium ions

Here, the influence and potential mechanism by which cellulose nanocrystals (CNC) collaborated with Ca2+ enhancing the heat-induced gelation of pea protein isolate (PPI) were investigated. It was found that the combination of 0.45% CNC and 15 mM Ca2+ synergistically increased the gel strength (from 14.18 to 65.42 g) and viscoelasticity of PPI while decreased the water holding capacity. The improved particle size, turbidity, and thermostability as well as the reduced solubility, crystallinity, and gel porosity were observed in CNC/CaCl2 composite system. CNC fragments bind to specific amino acids in 11S legumin and 7S vicilin mainly through hydrogen bonding and van der Waals forces. Moreover, changes in the protein secondary structure and enhancement of the molecular interaction induced by CNC and Ca2+ could favor the robust gel network. The results will provide a new perspective on the functional regulation of pea protein and the creation of pea protein gel-based food.

Integrated ultra-high pressure and salt addition to improve the in vitro digestibility of myofibrillar proteins from scallop mantle (Patinopecten yessoensis)

Myofibrillar protein (MP) is susceptible to the effect of ionic strength and ultra-high pressure (UHP) treatment, respectively. However, the impact of UHP combined with ionic strength on the structure and in vitro digestibility of MP from scallop mantle (Patinopecten yessoensis) is not yet clear. Therefore, it is particularly important to analyze the structural properties and enhance the in vitro digestibility of MP by NaCl and UHP treatment. The findings demonstrated that as ionic strength increased, the α-helix and β-sheet gradually transformed into β-turn and random coil. The decrease of endogenous fluorescence intensity indicated the formation of a more stable tertiary structure. Additionally, the exposure of internal sulfhydryl groups increased the amount of total sulfhydryl content, and reactive sulfhydryl groups gradually transformed into disulfide bonds. Moreover, it reduces aggregation through increased solubility, decreased turbidity, particle sizes, and a relatively dense and uniform microstructure. When MP from the scallop mantle was treated with 0.5 mol/L ionic strength and 200 MPa UHP treatment, it had the highest solubility (90.75 ± 0.13%) and the lowest turbidity (0.41 ± 0.03). The scallop mantle MP with NaCl of 0.3 mol/L and UHP treatment had optimal in vitro digestibility (95.14 ± 2.01%). The findings may offer a fresh perspectives for developing functional foods for patients with dyspepsia and a theoretical foundation for the comprehensive utilization of scallop mantle by-products with low concentrations of NaCl.

pH-induced interaction mechanism of zearalenone with zein: Binding characteristics, conformational structure and intermolecular forces

Zein-bound zearalenone (ZEN) complexes are naturally existed in maize by their spontaneous interaction, which significantly impacts the risk assessment of ZEN. Additionally, the pH levels in processing could affect the binding or release of zein-bound ZEN. In this study, pH-induced interaction mechanism of ZEN with zein were studied. Results showed that the acid conditions increased the binding constant (Ka) from 3.46 to 10.0 × 104 L/mol, binding energy from -17.38 to -43.49 kJ mol-1. By increasing hydrophobic interaction and hydrogen bond of ZEN with zein, the binding of ZEN with zein was promoted, forming zein-bound ZEN. Whereas, alkaline conditions decreased the Ka to 1.45 × 104 L/mol and binding energy to 148.48 kJ mol-1, weakened ZEN-zein interaction and stretched zein molecules, resulting the release of ZEN from zein. This study could provide important theoretical basis for perfecting risk assessment and controlling zein-bound ZEN during processing.

Insights into the emulsifying effect and oxidation stability of myofibrillar protein-diacylglycerol emulsions containing catechin at different ionic strengths

The purpose of this study was to investigate the effects of different ionic strengths on the emulsifying and oxidation stabilities of myofibrillar protein-diacylglycerol emulsions containing catechin (MP-DAG-C), in which lard, unpurified glycerolytic lard (UGL), and purified glycerolytic lard (PGL) were used as oil phases in this study, respectively. Results revealed that emulsifying ability was significantly improved by UGL and PGL (P < 0.05). Meanwhile, the emulsifying activity and stability, absolute ξ-potential value, shear viscosity, and dynamic rheological characteristic of emulsions increased with the increase of ionic strength (P < 0.05) remarkablely, which reached the maximum value at 0.6-M sodium chloride (NaCl). The droplets of emulsions at 0.6-M ionic strength were smallest and distributed most uniformly compared to other NaCl conditions. The formation of thiobarbituric acid substances and carbonyls increased, and the total sulfydryl contents decreased as the extension of storage days (P < 0.05). However, the oxidation stability of MP-DAG-C emulsions was insignificantly decreased by ionic strengths (P > 0.05). The above results showed that MP-DAG-C emulsions could keep excellent emulsifying effects and oxidation stability under high ionic strengths. This study provides data support for the application of MP-DAG-C emulsions in emulsified meat products, which is benefit for promoting the development of high-quality emulsified meat products.

Effect of polysaccharide concentration on heat-induced Tremella fuciformis polysaccharide-soy protein isolation gels: Gel properties and interactions

The formation of a single soybean protein isolate (SPI) gel is limited by the processing conditions, and has the disadvantages of poor gel property, and it is usually necessary to add other biomacromolecules to improve its property. In this study, we investigated the effects of polysaccharide concentration on gel properties and interaction mechanisms of Tremella fuciformis polysaccharide (TFP)-SPI complexes. It was found that (1) the rheological properties, texture properties, water-holding properties, and thermal stability of TFP-SPI composite gels were improved with the addition of TFP (0.25-2.0 %, w/v) in a concentration-dependent manner; (2) hydrogen bond, the electrostatic interaction, hydrophobic interaction, and disulfide bond in the gel system increased with the increase of TFP concentration; (3) the electrostatic and hydrophobic interactions played an important role in the formation of the TFP-SPI composite gel while hydrogen bond formation was the least contributor to the binary composite gel network. Overall, TFP is not only a critical health food but also a promising structural component for improving the gel properties of SPI.

Synergistic Effects of High-Intensity Ultrasound Combined with L-Lysine for the Treatment of Porcine Myofibrillar Protein Regarding Solubility and Flavour Adsorption Capacity

This study aimed to investigate the synergistic effects of high-intensity ultrasound (0, 5, 10, 15, and 20 min) in combination with L-lysine (15 mM) on improving the solubility and flavour adsorption capacity of myofibrillar proteins (MPs) in low-ion-strength media. The results revealed that the ultrasound treatment for 20 min or the addition of L-lysine (15 mM) significantly improved protein solubility (p < 0.05), with L-lysine (15 mM) showing a more pronounced effect (p < 0.05). The combination of ultrasound treatment and L-lysine further increased solubility, and the MPs treated with ultrasound at 20 min exhibited the best dispersion stability in water, which corresponded to the lowest turbidity, highest absolute zeta potential value, and thermal stability (p < 0.05). Based on the reactive and total sulfhydryl contents, Fourier transform infrared spectroscopy, and fluorescence spectroscopy analysis, the ultrasound treatment combined with L-lysine (15 mM) promoted the unfolding and depolymerization of MPs, resulting in a larger exposure of SH groups on the surface, aromatic amino acids in a polar environment, and a transition of protein conformation from α-helix to β-turn. Moreover, the combined treatment also increased the hydrophobic bonding sites, hydrogen-bonding sites, and electrostatic effects, thereby enhancing the adsorption capacity of MPs to bind kenone compounds. The findings from this study provide a theoretical basis for the production and flavour improvement of low-salt MP beverages and the utilisation of meat protein.

Relatively Low Lecithin Inclusion Improved Gelling Characteristics and Oxidative Stability of Single-Washed Mackerel (Auxis thazard) Surimi

The effect of lecithin addition on the gelling characteristics and oxidative stability of single-washed mackerel (Auxis thazard) surimi was investigated in this study. Surimi was chopped in the presence of 2.5% (w/w) NaCl with different concentrations of lecithin (0, 0.1, 0.5, 1, and 1.5 g/100 g surimi). The rheological behavior, gel-forming ability, microstructure, and lipid oxidation of lecithin-added surimi varied significantly depending on lecithin content. When compared to the control, lecithin at 0.1, 0.5, and 1 g/100 g improved the breaking force of the gel (p < 0.05). The breaking force of the gel decreased significantly as lecithin concentration increased (up to 1.5 g/100 g) (p < 0.05). Deformation, on the other hand, reacted differently to the lecithin than it did to the breaking force. At a lecithin level of 0.1 g/100 g, the surimi gel displayed improved deformation (p < 0.05). Nonetheless, at higher doses (0.5-1.5 g/100 g), lecithin considerably reduced surimi gel deformation (p < 0.05), and the gel containing lecithin at 1.5 g/100 g showed significantly decreased deformation. Surimi with 0.1 g/100 g lecithin had the lowest expressible drip (p < 0.05). In general, lecithin at concentrations ranging from 0.1 to 1 g/100 g reduced expressible drip (p < 0.05), but not at 1.5 g/100 g, which was equivalent to the control (p > 0.05). Adding lecithin to mackerel surimi improved its whiteness slightly, regardless of concentration. Lecithin impacted the microstructures of surimi gel in a concentration-dependent manner. Lecithin at a concentration of 0.1 g/100 g produced a densely packed network with small, jointed clusters and minimal holes within the gel. Joined clusters in the gel were reduced by 0.5-1.5 g/100 g lecithin, and continuous aggregates predominated. Surprisingly, at higher doses of lecithin, notably 1.5 g/100 g, porous structures with continuous voids were perceived. Surimi gels treated with various lecithin doses had lower thiobarbituric acid reactive substances (TBARS) levels than the control (p < 0.05). Overall, lecithin at a low concentration of 0.1 g/100 g was most effective at improving the texture, increasing water-holding capacity, lightening the color, and delaying lipid oxidation of single-washed mackerel surimi.

Effects and mechanisms of different κ-carrageenan incorporation forms and ionic strength on the physicochemical and gelling properties of myofibrillar protein

The present work was aimed to investigate the effects of incorporating κ-carrageenan into myofibrillar protein (MP) as a dry powder (CP) or water suspension (CW) and the ionic strength (0.3 or 0.6 M sodium chloride (NaCl)) on MP physicochemical and gelling properties. The results indicated that incorporation of either CP or CW significantly increased turbidity, surface hydrophobicity, particle size and rheological behaviour of MP. In contrast, the protein solubility and fluorescence intensity of MP decreased when added with each form of κ-carrageenan (P < 0.05). These observed effects improved MP's gelling properties and produced a more compact and homogenous gel network after heating treatment. Moreover, the addition of CW rendered higher gel strength, water holding capacity and intermolecular interactions, such as ionic, hydrogen and disulphide bonds and hydrophobic interactions in MP gel compared with those added with CP, especially for 0.3 M NaCl (P < 0.05). Furthermore, addition of CW significantly decreased the α-helix content of MP gels (P < 0.05), which mainly contributing to the transformation from a random structure to an organised configuration. In addition, a higher NaCl concentration (0.6 M) enhanced the gelling properties of MP gels compared with 0.3 M NaCl concentration in the presence of each form of κ-carrageenan. Therefore, our present study indicated that incorporation form of κ-carrageenan and ionic strength have distinctive effects on regulating physicochemical characteristics and improves gelling properties of MP.

Insight into the effect of large yellow croaker roe phospholipids on the physical properties of surimi gel and their interaction mechanism with myofibrillar protein

BACKGROUND

The present study aimed to investigate the effects of large yellow croaker roe phospholipids (LYCRPLs) on the physical properties of surimi gels and to clarify their interaction mechanism with myofibrillar proteins (MPs) in terms of chemical forces and the spatial conformation.

RESULTS

LYCRPLs could improve the gel strength, textural properties, rheological properties and water-holding capacity of surimi gels. Moreover, the interaction mechanism between LYCRPLs with MPs was revealed through intermolecular forces, Fourier transform infrared spectroscopy and ultraviolet visible absorption spectroscopy. The findings demonstrated that LYCRPLs enhanced the surface hydrophobicity and particle size of MPs, facilitating expansion and cross-linking of MPs.

CONCLUSION

These results provide a theoretical basis for improving the characteristics of surimi gels and thus facilitate the application of LYCRPLs in the aquatic food industry. © 2023 Society of Chemical Industry.

Effects of blackberry (Rubus spp.) polysaccharide on the structure and thermal behavior of the myofibrillar protein of chicken breast meat

Blackberry crude polysaccharides (BCP) was added to chicken breast to inspect the intermolecular interaction with myofibrillar protein (MP). The influence of BCP on the thermal transformation behavior and protein micro-structure during temperature rise period was studied. The results showed that the interaction between BCP and MP was mainly affected by the concentration of BCP and heating temperature. The results of infrared spectrophotometer and nano-particle/zeta potentiometer showed that a BCP-MP complex was generated through hydrogen bond and electrostatic interaction, which could promote the transformation of MP from β-folding to β-Angle transformation. The fluorescence spectra showed that the BCP was helped to the spread of protein structure of the MP. Moreover, synchronous thermal analyzer and rheometer results revealed that the BCP increased the enthalpy value and elastic modulus of MP. Scanning electron microscope verified pores inside the BCP-MP complex are more evenly distributed and smaller, which led to the high cross-linking of network and good stability of water distribution for the MP. The addition of BCP enhances the hydrogen bonds and disulfide bonds of MP molecules, which can strengthen the network structure and ultimately improve the performance of meat products.

Modification of low-salt myofibrillar protein using combined ultrasound pre-treatment and konjac glucomannan for improving gelling properties: Intermolecular interaction and filling effect

The quality deterioration of low-salt meat products has been gained ongoing focus of researchers. In this study, konjac glucomannan (KGM) was used to alleviate the finiteness of ultrasound treatment on the quality improvement of low-salt myofibrillar protein (MP), and the modification sequence was also investigated. The results revealed that the single and double sequential modification by utilizing KGM and ultrasound significantly influenced the gelation behavior of low-salt MPs. The uniform MP-KGM mixture formed by a single ultrasound treatment had limited protein unfolding, resulting in relatively weak intermolecular forces in the composite gel. Importantly, ultrasound pre-treatment combined with KGM modification promoted the unfolding and moderate thermal aggregation of proteins and remarkably improved the rheological behaviors and gel strength of the composite gel. This result could also be corroborated by the highest percentage of trans-gauche-trans conformation of SS bridges and maximum β-sheet proportion. Furthermore, molecular dynamic simulation and molecular docking elucidated that the hydrogen bond length between protein and KGM was shortened after ultrasound pre-treatment, which was the molecular basis for the enhanced intermolecular interactions. Therefore, ultrasound pre-treatment combined with KGM can effectively improve the gelling properties of low-salt MPs, providing a practical method for the processing of low-salt meat products.

Gel Properties and Structural Characteristics of Composite Gels of Soy Protein Isolate and Silver Carp Protein

Problems with silver carp protein (SCP) include a strong fishy odor, low gel strength of SCP surimi, and susceptibility to gel degradation. The objective of this study was to improve the gel quality of SCP. The effects of the addition of native soy protein isolate (SPI) and SPI subjected to papain-restricted hydrolysis on the gel characteristics and structural features of SCP were studied. The β-sheet structures in SPI increased after papain treatment. SPI treated with papain was crosslinked with SCP using glutamine transaminase (TG) to form a composite gel. Compared with the control, the addition of modified SPI increased the hardness, springiness, chewiness, cohesiveness, and water-holding capacity (WHC) of the protein gel (p < 0.05). In particular, the effects were most significant when the degree of SPI hydrolysis (DH) was 0.5% (i.e., gel sample M-2). The molecular force results demonstrated that hydrogen bonding, disulfide bonding, and hydrophobic association are important molecular forces in gel formation. The addition of the modified SPI increases the number of hydrogen bonds and the disulfide bonds. Scanning electron microscopy (SEM) analysis showed that the papain modifications allowed the formation of a composite gel with a complex, continuous, and uniform gel structure. However, the control of the DH is important as additional enzymatic hydrolysis of SPI decreased TG crosslinking. Overall, modified SPI has the potential to improve SCP gel texture and WHC.

Effect of Dietary Supplementation of Lactiplantibacillus plantarum N-1 and Its Synergies with Oligomeric Isomaltose on the Growth Performance and Meat Quality in Hu Sheep

Probiotics have gained tremendous attention as an alternative to antibiotics, while synbiotics may exhibit a greater growth promoting effect than their counterpart probiotics due to the prebiotics' promotion on the growth and reproduction of probiotics. The objective of this study was to investigate the influence of Lactiplantibacillus plantarum N-1 and its synbiotic with oligomeric isomaltose on the growth performance and meat quality of Hu sheep. Hu sheep (0-3 days old) were fed with water, probiotics of N-1, or synbiotics (N-1 and oligomeric isomaltose) daily in three pens for 60 days and regularly evaluated to measure growth performance and collect serum (five lambs per group). Longissimus thoracis (LT) and biceps brachii (BB) muscle tissues were collected for the analysis of pH value, color, texture, nutrients, mineral elements, amino acids, volatile compounds, and antioxidant capacity. The results showed that dietary supplementation of N-1 tended to improve growth performance and meat quality of Hu sheep, while the synergism of N-1 with oligomeric isomaltose significantly improved their growth performance and meat quality (p < 0.05). Both the dietary supplementation of N-1 and synbiotics (p < 0.05) increased the body weight and body size of Hu sheep. Synbiotic treatment reduced serum cholesterol and improved LT fat content by increasing the transcription level of fatty acid synthase to enhance fat deposition in LT, as determined via RT-qPCR analysis. Moreover, synbiotics increased zinc content and improved LT tenderness by decreasing shear force and significantly increased the levels of certain essential (Thr, Phe, and Met) and non-essential (Asp, Ser, and Tyr) amino acids of LT (p < 0.05). Additionally, synbiotics inhibited the production of carbonyl groups and TBARS in LT and thus maintained antioxidant stability. In conclusion, it is recommended that the use of synbiotics in livestock breeding be promoted to improve sheep production and meat quality.

Dose-Dependent Effect of Hyperoside on the Physicochemical and Gel Properties of Porcine Myofibrillar Proteins at Different NaCl Concentrations under Oxidative Stress

The effects of HYP (10, 50, and 250 μM/g protein) on the physicochemical and gel properties of myofibrillar proteins (MPs) at different NaCl concentrations under oxidative stress were explored. The incorporation of HYP significantly reduced carbonyl content and decreased the loss of free amine groups in a dose-dependent manner, regardless of NaCl concentration. In addition, HYP induced a dose-dependent decrement in total sulfhydryl content regardless of NaCl concentration, which might result from the formation of thiol-quinone adducts via Michael addition. The surface hydrophobicity was significantly increased with HYP addition. Nevertheless, compared with samples treated with 50 μM/g HYP, 250 μM/g HYP caused a significant decrease in surface hydrophobicity, which might be due to the increase in the extent of MPs unfolding and the concomitant aggregation of MPs by hydrophobic interaction. Furthermore, HYP also showed a dose-dependent increment in the water-holding capacity (WHC) and gel strength of MPs gels, which might be due to more orderly crosslinks via fibrous filaments at 0.2 M NaCl and more regular and lamellar structures with smaller and more homogeneous pores at 0.6 M NaCl. In summary, HYP reduced the oxidation-mediated changes of physicochemical characteristics, preventing the oxidative damage of MPs and reinforcing the ordered crosslinks of MPs-MPs and MPs-HYP during thermal gelation, ultimately resulting in a better gel quality. These results provide a theoretical support for the practical application of HYP as a natural antioxidant in gel-type meat products.

A review of oil and water retention in emulsified meat products: The mechanisms of gelation and emulsification, the application of multi-layer hydrogels

Emulsified meat products are key deep-processing products due to unique flavor and high nutritional value. Myosin dissolves, and protein aggregation and heat-induced gelation occur after myosin unfolds and hydrophobic groups are exposed. Myosin could form interfacial protein membranes and wrap fat globules. Emulsified fat globules may be filled in heat-induced gel networks. Therefore, this review intends to discuss the influences of heat-induced gelation and interfacial adsorption behavior on oil and water retention. Firstly, the mechanism of heat-induced gelation was clarified from the perspective of protein conformation and micro-structure. Secondly, the mechanism of emulsification stability and its factors affecting interfacial adsorption were demonstrated as well as limitations and challenges. Finally, the structure characteristics and application of multi-layer hydrogels in the gelation and emulsification were clarified. It could conclude that the characteristic morphology, spatial conformation and structure adjustment affected heat-induced gelation and interfacial adsorption behavior. Spatial conformation and microstructure were adjusted to improve the oil and water retention by pH, ionic strength, amino acid, oil phase characteristic and protein interaction. Multi-layer hydrogels facilitated oil and water retention. The comprehensive review of gelation and emulsification mechanisms could promote the development of meat products and improvement of meat processing technology.

Effect of lentinan on gelling properties and structural changes of goose myofibrillar protein under oxidative stress

BACKGROUND

The reduction of protein oxidation is important for maintaining the product quality of reconstituted meat. In this study, the dose-dependent effects of lentinan (LNT) on gelling properties and chemical changes in oxidatively stressed goose myofibrillar protein were investigated.

RESULTS

Myofibrillar protein (MP) with 200 μmol g^-1 protein LNT increased gel strength by 87.90 ± 9.26% in comparison with LNT-free myofibrillar protein after oxidation. Scanning electron microscopy analysis revealed that the gel network containing LNT was compact, with small pores and uniform distribution. The absolute value of the zeta potential reduced significantly following oxidation of LNT with 200 μmol g^-1 protein at 4 °C for 12 h compared with the zeta potential without LNT, according to the laser particle size analyzer. The incorporation of LNT increased protein solubility and -SH content, inhibited carbonyl formation, enhanced α-helix content and tryptophan intrinsic fluorescence intensity, and reduced exposure of hydrophobic groups and protein aggregation.

CONCLUSION

The results indicated that adding LNT to myofibrillar protein could improve gel. This is related to its protective effect on conformational changes in the oxidation system. Lentinan is therefore recommended for oxidatively stressed goose meat processing to enhance the MP gelling potential. © 2023 Society of Chemical Industry.

Impacts of soybean protein isolate hydrolysates produced at high hydrostatic pressure on gelling properties, structural characteristics, and molecular forces of myofibrillar protein

BACKGROUND

Soybean protein isolate hydrolysates (SPIHs) produced at high hydrostatic pressure have higher bioactivity. The aim of the study was to analyze the effects of different SPIH concentrations obtained under various pressures (0.1, 100, 200, and 300 MPa) on gelling properties, structural characteristics, and main forces of myofibrillar protein (MP) in MP-SPIH plural gels.

RESULTS

The MP-SPIH plural gel with 3% SPIH produced under 200 MPa had the maximum gel strength (0.42 N) and water holding capacity (53.69%). A decline in thermal stability and a rise in storage modulus (G') of MP-SPIH plural gels were found with increased SPIH pressure and concentration. Additionally, the addition of SPIHs increased the amounts of α-helix and β-sheet, decreased random coil structural content of MP in MP-SPIH plural gels, and facilitated the generation of a denser and uniform gels network. The molecular forces in MP-SPIH plural gels were mainly hydrophobic interaction and hydrogen bond.

CONCLUSION

This study showed that the interaction of MP with 3% SPIH obtained at 200 MPa improved the quality of plural gels. © 2022 Society of Chemical Industry.

Enhanced Gel Properties of Duck Myofibrillar Protein by Plasma-Activated Water: Through Mild Structure Modifications

This study assessed the gel properties and conformational changes of duck myofibrillar protein (DMP) affected by plasma-activated water (PAW) generated at various discharge times (0 s, 10 s, 20 s, 30 s, and 40 s). With the treatment of PAW-20 s, the gel strength and water-holding capacity (WHC) of DMP gels were significantly increased when compared to the control group. Throughout the heating process, dynamic rheology revealed that the PAW-treated DMP had a higher storage modulus than the control. The hydrophobic interactions between protein molecules were significantly improved by PAW, resulting in a more ordered and homogeneous gel microstructure. The increased sulfhydryl and carbonyl content in DMP indicated a higher degree of protein oxidation with PAW treatment. Additionally, the circular dichroism spectroscopy demonstrated that PAW induced α-helix and β-turn transformed to β-sheet in DMP. Surface hydrophobicity, fluorescence spectroscopy, and UV absorption spectroscopy suggested that PAW altered DMP's tertiary structure, although the electrophoretic pattern indicated that the primary structure of DMP was mostly unaffected. These results suggest that PAW can improve the gel properties of DMP through mild alteration in its conformation.

Insights into the trace Sr2+ impact on the gel properties and spatial structure of mutton myofibrillar proteins

Myofibrillar proteins (MPs) and the quality of meat strongly depend on the properties of MP gels, which in turn depend on several parameters that include the thermal history and the concentration of metal ions. Strontium element (Sr) widely exists in mineral water and is found as strontium ions (Sr²⁺), which is an essential trace element for humans. This study investigated the effects of trace Sr²⁺ on the structure-function relationship of mutton MPs, as well as their gels with water. Trace concentrations of Sr²⁺ were found to significantly alter the conformation of the MPs. An increase in Sr²⁺ concentration was associated with a reduction in the tightness and strength of the gel and a significant increase in its water-holding capacity As compared to the untreated control sample, the solubility, particle size, and the magnitude of the Zeta potential of the gels increased by 13.03 %, 12.62 %, and 19.73 %, respectively, whereas the water retention capacity and the gel strength increased by 23.13 % and 21.90 %, at a Sr²⁺ concentration of 5.0 mg/L. Molecular docking predicted an increase in ionic bonds and disulfide bonds because Sr²⁺ had a strong interaction with hydrophilic amino acids and acidic amino acids. The analysis of molecular forces further verified the significant facilitation of interactions between MP molecules with the induction of Sr²⁺. As compare to the untreated control group, the ionic and disulfide bonds increased by 141.17 % and 66.94 %, when treated with 5.0 mg/L Sr²⁺. These changes were likely due to the enhancement of protein-protein interactions caused by Sr²⁺, which could induce MP molecules to properly unfold and aggregate in gel formation. The results could provide a basis for improving the texture and the quality of meat and meat products.

Physicochemical Characteristics of Meat Analogs Supplemented with Vegetable Oils

This study identified the effect of the type and concentration of vegetable oil on the quality of meat analogs and analyzed the differences in their physiochemical characteristics. Various vegetable oils, such as castor oil, orange oil, palm oil, shortening, and margarine, were added to meat analogs. The meat analog was prepared by adding 10, 20, 30, 40, and 50 g of each vegetable oil based on 100 g of textured vegetable protein. The cooking loss, water content, liquid-holding capacity, texture, and antioxidant content of the meat analogs were assessed, and a sensory evaluation was performed. The meat analog with orange oil had a higher water content than the others, regardless of the amount of added oil, and it had a relatively high liquid-holding capacity. The DPPH(2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity of the meat analog with orange oil was higher than that of the others. The sensory evaluation also showed a decrease in soy odor and an increase in juiciness. Therefore, adding orange oil improves the preference, juiciness, soy odor, and quality of meat analogs. Our results demonstrate that orange oil has positive effects on the productivity of meat analogs and can help to improve meat analog consumption.

Physico-Chemical Properties and Storage Stability of an Emulsion as a Fat Replacer in Meat Analogs during the Freezing Storage

This study determined the effects of physicochemical and microbial properties of emulsion as a fat replacer in meat analogs during freezing storage. Meat analogs were prepared with different fat replacers: vegetable oil (O) for control, oil in water emulsion (E), and non-emulsified oil in water emulsion (EC) for emulsion control. After that, meat analogs were stored for 0.5, one, three, and six months at −18 °C and −60 °C. The results showed that the drip loss of all samples was not significantly different (p > 0.05). However, the liquid holding capacity of EC and E was significantly higher than that of O (p < 0.05). Additionally, the microstructures of meat analogs of E and EC were smaller with denser pore sizes than O. This explains the significantly lower hardness of E and EC compared to O (p < 0.05). Overall, E showed superior physiochemical and sensory quality. During the storage, the stability of chemical properties, such as volatile basic nitrogen and thiobarbituric acid reactive substances, showed no significant changes (p > 0.05). Moreover, the microbial studies (total viable counts and Escherichia coli count) suggested that meat analogs did not deteriorate during the preparation and storage. Thus, this study suggests that emulsion-type fat replacers influence meat analogs’ physicochemical and sensorial properties. However, these properties are not influenced by the storage temperature and duration.

Gelling Power Alteration on Kappa-Carrageenan Dispersion through Esterification Method with Different Fatty Acid Saturation

The physicochemical properties of κ-carrageenan gels and their ester forms derived from different fatty-acid saturations were characterized and compared with those of native κ-carrageenan. Furthermore, stearic and oleic acids were used as the saturated and unsaturated fatty acids, respectively. Fourier-transform infrared (FTIR) spectra confirmed the introduction of the ester into the κ-carrageenan backbone. The thermogravimetric analysis showed that thermal stability increased along with the level of unsaturation, but there was a decrease in viscosity, hardness, and syneresis, which caused the consistency of the product to become more elastic. The results also showed that the ester form still has a swelling ability that is almost the same as that of κ-carrageenan. After being formulated into a gel dosage form, the product was successfully produced from the ester with unsaturated fatty acids, and it was more elastic than native κ-carrageenan and had good physical properties with spreadability that meets the requirements for topical preparations.

Konjac glucomannan improves the gel properties of low salt myofibrillar protein through modifying protein conformation

Improving the characteristics of low salt proteins is the key to the gel properties of low-salt meat products which are demanded by people nowadays. The present study focused on the effects of KGM concentrations on the changes in structure and gelling properties of low-salt myofibrillar protein (MP). KGM addition (≤0.75 %) irrespective of salt concentration modified secondary and tertiary structures of MPs, enhanced the binding capacity of Troponin-T and Tropomyosin, augmented the gelling behavior of proteins, and remarkably improved the storage modulus (G') and gel strength of heat-induced MP gels. Interestingly, KGM addition in low salt condition showed the transformation of the all-gauche SS conformation into gauche-gauche-trans and trans-gauche-trans, and the partial transformation of α-helices into β-sheets. overall, KGM modified the structure of low salt MPs and thus improved the gel properties of low salt MPs. Therefore, KGM is recommended for low-salt meat processing to enhance the MP gelling potential.

Improved retention ratio and bioaccessibility of lutein loaded in emulsions stabilized by egg yolk granules-lecithin complex

BACKGROUND

Egg yolk granules (EYGs)-soy lecithin (SL) complex is a newly developed delivery system that is effective for improving the storage stability of hydrophobic bioactive compounds. However, the formation mechanism of EYGs and SL complex and its effect on the gastrointestinal fate of lutein-loaded emulsions needs to be investigated further.

RESULTS

Adding SL greatly improved the surface activity of the EYGs, as evidenced by reduced surface tension and an increased adsorption rate to the oil/water interface. Hydrophobic interaction was the dominant force in the formation of EYG-SL complex, with hydrogen and ionic bonds playing complementary roles. Using the EYG-SL complex, stable oil-in-water emulsions were formed and exhibited an enhanced retention ratio and bioaccessibility of lutein after simulated digestion. Correlation analysis demonstrated that the additional anti-oxidant activity as a result of EYGs was responsible for the high retention of lutein, whereas low surface tension facilitated the micellization of bioaccessible lutein.

CONCLUSION

The present study shows that the EYG and SL have a synergistic effect with respect to improving the retention ratio and bioaccessibility of lutein in emulsions stabilized by EYG-SL complex after digestion and this will guide the development of value-added oil-in-water emulsion products using protein-lecithin complex as a promising nutrient delivery vehicle. © 2022 Society of Chemical Industry.

Improvement of the gel properties and flavor adsorption capacity of fish myosin upon yeast β-glucan incorporation

The potential effects of yeast β-glucan (YG) on heat-induced gel properties, microstructure and flavor adsorption capacity of fish myosin at different NaCl concentrations were investigated in this study. The incorporation of YG significantly improved the texture properties, gel strength, water holding capacity (WHC), storage modulus and loss modulus of myosin gels, especially at a high salt level, whereas the whiteness declined. Furthermore, myosin gels containing YG displayed a more compact and ordered three-dimensional network structure, accompanied by the increasing immobilization of water in gels. The binding abilities of gels to selected flavor compounds at high salt content were inferior to those at the low salt content. Regardless of the salt level, YG addition boosted the flavor binding capacity of gels, which might be attributed to the unfolding of the protein conformation by exposing more flavor-binding sites, as well as the porous sponge structure of YG with unique adsorption capacity.

Effects of quinoa protein Pickering emulsion on the properties, structure and intermolecular interactions of myofibrillar protein gel

The effects of quinoa protein Pickering emulsion (QPE) on the gel properties, protein structure and intermolecular interactions of myofibrillar protein (MP) gels were studied. Compared with the MP gels without QPE, the MP gels with 5.0%-7.5% added QPE showed significant increasing trends in storage modulus (G'), whiteness, gel strength and water holding capacity (WHC). The content of disulfide bonds in the gel increased with the addition of QPE and the disulfide bond conformation changed from gauche-gauche-gauche to gauche-gauche-trans. Moreover, the increase of hydrogen bonds after QPE addition confirmed the transformation from α-helix to β-sheet, as β-sheet structure was stabilized by interchain hydrogen bonds. The added QPE also enhanced the hydrophobic interaction and electrostatic interaction of MP gels. To conclude, the addition of 5.0%-7.5% QPE improved the intermolecular interactions and the structure stability of MP gels, and enhanced the gelation and WHC of MP gels.

Effect of NaCl on the Rheological, Structural, and Gelling Properties of Walnut Protein Isolate-κ-Carrageenan Composite Gels

In this study, we discovered that a certain concentration of Na⁺ (15 mM) significantly improved the bond strength (12.94 ± 0.93 MPa), thermal stability (72.68 °C), rheological properties, and textural attributes of walnut protein isolate (WNPI)-κ-carrageenan (KC) composite gel. Electrostatic force, hydrophobic interaction, hydrogen bond, and disulfide bond were also significantly strengthened; the α-helix decreased, and the β-sheet increased in the secondary structure, indicating that the protein molecules in the gel system aggregated in an orderly manner, which led to a much denser and more uniform gel network as well as improved water-holding capacity. In this experimental research, we developed a new type of walnut protein gel that could provide technical support for the high-value utilization and quality control of walnut protein.

Characteristics and Mechanism of Crayfish Myofibril Protein Gel Deterioration Induced by Autoclaving

Crayfish myofibril protein (CMP) gel deterioration induced by autoclaving was investigated. A series of CMP gels were obtained through treating CMP solutions at different autoclaving conditions from 100 °C/0.1 MPa to 121 °C/0.21 MPa, and then characteristics and the mechanism of gel texture deterioration along with the intensification of autoclaving were explored through determining appearance, texture, protein composition, cross-linking forces, degree of hydrolysis, water state, microstructure of the gels, and average particle size of aggregates. When autoclaving was at above 105 °C/0.103 MPa, texture of CMP gel showed a tendency to severely weaken with the intensification of autoclaving (p < 0.05), hydrophobic interaction and aggregation between proteins weakened gradually (p < 0.05), and moderately bound water in the gel decreased and T22 relaxation time significantly increased (p < 0.05). After heating for 30 min at above 105 °C/0.103 MPa, pores in the microstructure of CMP gel enlarged obviously, and myosin heavy chain (MHC) degraded. It can be concluded that CMP gel deterioration induced by autoclaving was associated with the degradation of MHC and 105 °C might be the critical temperature to ensure good texture of crayfish products.