Morphological, structural and digestibility properties of RS4 enriched octenyl succinylated sweet potato, banana and lentil starches

Exploring the remarkable effects of microwave treatment on starch modification: From structural evolution to changed physicochemical and digestive properties

As one of the crucial components of the food system, starch can be hydrolyzed into glucose after gastrointestinal digestion, so regulating its digestive properties is vital for maintaining health. Microwaves can promote the rearrangement of intramolecular structure of starch, thus improving its physicochemical properties, enhancing its slowly digestible features, and expanding its scope of application. This review zooms in describing recent research results concerning the effects of microwave treatment on the multi-scale structure and physicochemical properties of starch and summarizing the patterns of these changes. Furthermore, the changes in starch structure, resistant starch content, and glycemic index after digestion are pointed out to gain an insight into the enhancement of starch slowly digestible properties by microwave treatment. The resistance of starch to enzymatic digestion may largely hinge on the specific structures formed during microwave treatment. The multi-level structural evolutions of starch during digestion endow it with the power to resist digestion and lower the glycemic index. The properties of starch dictate its application, and these properties are highly associated with its structure. Consequently, understanding the structural changes of microwave-modified starch helps to prepare modified starch with diversified varieties and functional composites.

Octenyl succinic anhydride tigernut starch: Structure, physicochemical properties and stability of curcumin-loaded Pickering emulsion

In recent years, there has been increasing attention to starch particle-stabilized Pickering emulsions. In this study, the tigernut starch (TNS) was isolated from the tigernut meal, and further octenyl succinic anhydride tigernut starch (OSATNS) was prepared by a semi-dry method. The structure of OSATNS was analyzed and characterized by degrees of substitution (DS), contact angle, SEM, and FTIR. OSATNS was then used to stabilize the curcumin-loaded Pickering emulsion to improve the water solubility and stability of the curcumin. The results showed that OSATNS with 3 %-9 % OSA exhibited a DS range of 0.012 to 0.029, and its contact angle increased from 69.23° to 84.76°. SEM revealed that TNS consisted of small starch particles averaging 7.71 μm, and esterification did not significantly alter their morphology or size. FTIR analysis confirmed successful OSA incorporation by revealing two new peaks at 1732 cm-1 and 1558 cm-1. After 7 days of storage, Pickering emulsions stabilized with OSATNS-9 % exhibited superior stability and curcumin retention compared to Tween 80 emulsions, maintaining retention rates above 80 % even after different heat treatments. In conclusion, this study shows the potential application of OSATNS in stabilizing Pickering emulsions and demonstrates its good thermal stability and protection against curcumin during storage.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Exploring the effects of enzymatic and thermal treatments on banana starch characteristics

Banana starch has a highly resistant starch (RS) and slow-digested starch (SDS) content, making it attractive as a functional ingredient. Unfortunately, banana starch requires modification processes due to the loss of RS and SDS during gelatinization because of its thermolabile characteristics. This study explores the effect of banana starch modification by enzymatic, heat moisture treatment (HMT) and dual modification (HMT+ enzymatic) on its nutritional (RS, SDS) and functional properties (hydration, structural, gelation, rheological). HMT and dual modifications decrease RS (from 44.62 g/100 g to 16.62 and 26.66 g/100 g, respectively) and increase SDS (from 21.72 g/100 g to 33.91 and 26.95 g/100 g, respectively) in raw starch but induce structural changes that enhance RS (from 3.10 g/100 g to 3.94 and 4.4 g/100 g, respectively) and SDS (from 2.58 g/100 g to 9.58 and 11.48 g/100 g) thermo-resistance in gelled starch. Also, changes in the functional properties of starches were evidenced, such as weaker gels (hardness < 41 g), lower water absorption (<12.35 g/g), high starch solubility (>1.77 g/100 g) and increased gelatinization temperature. Improved gelatinization temperature and RS thermostability resulted from modifications that could expand banana starch applications as a beverage and compote thickener agent.

Cross-linked modifications of starches from colored highland barley and their characterizations, digestibility, and lipolysis inhibitory abilities in vitro

To promote the stability and functionality of native starch from colored highland barley (CHBS), the cross-linked modifications with sodium trimetaphosphate (STMP)/sodium tripolyphosphate (STPP) and citric acid were conducted to prepare CHB resistant starches (CHRSs), whose physicochemical characteristics, digestibility, and lipolysis inhibitory potential were also assessed. Results showed that the resistant starch amounts in CHBS were significantly increased after cross-linking and differed slightly among CHRSs. Citric acid modification of CHBS resulted in significantly higher amylose amounts, solubilities, swelling powers, and water-binding capacities than those under STMP/STPP modification within the cultivars (p < 0.05), with their crystalline patterns of A-type (white and blue) and CB-type (black). STMP/STPP modified CHBS exhibited higher degrees of crystalline regions with B-type crystalline patterns. Due to the differences in structural properties and structure-based morphology, STMP/STPP cross-linked CHBS showed lower digestibility and citric acid cross-linked CHBS exhibited higher lipolysis inhibitory activities. Besides, the cross-linked modifications demonstrated more enhancements in functionalities of starches from white and blue cultivars than black cultivar.

Effects of particle size on quality characteristics of stone-milled whole wheat flour

BACKGROUND

Whole wheat flour (WWF) prepared by the direct crushing method preserves all the components of the whole wheat grain. WWF with different particle sizes (180, 150, 125, 106, and 96 μm) was obtained by combining stone milling and particle size sieving technology. The effects of particle size on the proximate composition, farinograph, pasting, thermal, and functional properties, starch microstructure, and Fourier-transform infrared (FTIR) spectroscopy of stone-milled WWF were investigated.

RESULTS

The smaller the particle size of WWF, the higher the damaged starch content. The water absorption, degree of softening, pasting temperature, solubility, and syneresis of WWF increased steadily as the particle size decreased, whereas the peak viscosity, final viscosity, swelling power, water holding capacity, and enthalpy of gelatinization decreased. The scanning electron microscope micrographs revealed that the larger the particle size of WWF, the denser the distribution of starch granules. The β-sheet and β-turn contents of WWF with particle size 180 μm were the highest, reaching up to 33.85% and 39.79%, respectively.

CONCLUSION

The particle size exerted influence on the quality characteristics of stone-milled WWF, and the overall properties of WWF were better at medium particle size. © 2023 Society of Chemical Industry.

Effects of dry heating, acetylation, and acid pre-treatments on modification of potato starch with octenyl succinic anhydride (OSA)

Octenyl succinic anhydride (OSA) starch is widely used to stabilize emulsions. Nevertheless, the poor compatibility of starch with hydrophobic groups has restricted the performance of OSA modification. In this work, potato starch was pre-treated once or twice (dry heating, acetylation, and acid modification) prior to OSA modification. Pre-treatments increased the degree of substitution (DS), hydrophobicity, hydrophilicity, and decreased amylose content of OSA starches, with dual pre-treatments having greater effects. Among all pre-treatments, acid modification followed by dry heating resulted in the greatest OSA modification (DS: 0.015) and water-binding capacity (155%). Meanwhile, acid modification followed by acetylation produced OSA starch with the highest oil-binding capacity (290%). Scanning electron microscopy revealed that the granular deformation of dual pre-treated OSA starches was greater compared to single pre-treated and non-pre-treated OSA starches (O). Dual pre-treated OSA starches (ADO, 7%; ACO, 8%) had lower amylose contents than those of single pre-treated (AO: 12%, CO: 17%, DO: 21%) and O (36%). All the pre-treatments reduced the setback viscosity of OSA starch to a lower range (70–394 cP), simultaneously decreasing their retrograde tendency. This study suggested that dual pre-treatments could improve the efficiency of OSA modification and produce OSA starch with greater emulsifying potential.

Resistant starch from sweet potatoes: Recent advancements and applications in the food sector

In tropical and subtropical areas, tuber and root crops are staple foods and a key source of energy. Sweet potato (SP) is currently regarded as one of the world's top ten foods because of its diverse sizes, shapes, color, and health benefits. The resistant starch (RS) content of SP is substantial. It is predicted to become the cheapest item in the food industry due to its extensive variety, food stability, emulsifier and fat substitution capabilities, and as filler. As a result, interest in SP-sourced RS has recently increased. Due to their unique nutritional and functional qualities, novelty has become a popular research focus in recent years. This review will summarize the current understanding of SP starch components and their impact on the technological and physicochemical properties of produced starch for commercial viability. The importance of sweet potato RS in addressing future RS demand sustainability is emphasized. SPs are a viable alternative to tubers as a sustainable raw material for RS production. It has an advantage over tubers because of its intrinsic nutritional value and climatic endurance. Thermal, chemical, and enzymatic treatments are effective RS manufacturing procedures. The adaptability of sweet potato RS allows for a wide range of food applications.

Sweet Potato (Ipomoea batatas L.) Phenotypes: From Agroindustry to Health Effects

Sweet potato (SP; Ipomoea batatas (L.) Lam) is an edible tuber native to America and the sixth most important food crop worldwide. China leads its production in a global market of USD 45 trillion. SP domesticated varieties differ in specific phenotypic/genotypic traits, yet all of them are rich in sugars, slow digestible/resistant starch, vitamins, minerals, bioactive proteins and lipids, carotenoids, polyphenols, ascorbic acid, alkaloids, coumarins, and saponins, in a genotype-dependent manner. Individually or synergistically, SP’s phytochemicals help to prevent many illnesses, including certain types of cancers and cardiovascular disorders. These and other topics, including the production and market diversification of raw SP and its products, and SP’s starch as a functional ingredient, are briefly discussed in this review.

Modulating the in vitro digestibility of chemically modified starch ingredient by a non-thermal processing technology of ultrasonic treatment

Chemically modified starch (RS4) was commercially available as a food ingredient, however, there was a lack of knowledge on how ultrasonic treatment (non-thermal technology) modulated the enzymatic resistance of RS4. In this study, structural change of RS4 during ultrasonic treatment and its resulting digestibility was investigated. Results from scanning electron microscopy, particle size analysis, chemical composition analysis, X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy showed that ultrasonic treatment remained the granule morphology, increased the apparent amylose content, reduced the particle size, destroyed the crystalline structure, decreased the helical orders, but enhanced the short-range molecular orders of ultrasonic-processed RS4. In vitro digestibility analysis showed that the total content of rapidly digestible starch and slowly digestible starch was increased, whereas the content of resistant starch was decreased. Overall, ultrasonic treatment substantially reduced the enzymatic resistance of RS4, indicating that RS4 was not stability against the non-thermal processing technology of ultrasonic treatment.

Evaluation of structural and physicochemical properties of octenyl succinic anhydride modified sweet potato starch with different degrees of substitution

Octenyl succinic anhydride modified sweet potato starch (OSA-SPS) were synthesized in different degrees of substitution (DS) from 0.0073 to 0.0153. Unlike sweet potato starch (SPS), two additional characteristic peaks were detected at 1,572 and 1,724 cm^-1 from the Fourier Transform-Infrared spectroscopy in OSA-SPS and their intensities were generally increased with the elevation in DS. Scanning electron microscopy and X-ray diffraction analyses revealed that the esterification did not alter the initial shape of starch granules and mainly occurred on the surface of starch pellets. In addition, OSA-SPS possessed higher transmittance, viscosity and stability, lower gelatinization temperature, and shorter gelatinization time than SPS. The changes of these properties of SPS after the esterification with OSA would be more conducive to its application in food and other fields. PRACTICAL APPLICATION: Octenyl succinic anhydride modified starch (OSAS), as a relatively novel amphiphilic surfactant, have been applied to the processing of many products due to its special hydrophilicity and lipophilicity. The structural and physicochemical properties of sweet potato starch (SPS) and octenyl succinic anhydride modified sweet potato starch (OSA-SPS) with different degrees of substitution (DS) were systematically analyzed in this research. The findings give fundamental understanding of OSA-SPS and provide a basic reference for its application in industries including food, cosmetics, textiles, and so on.

Preparation and characterization of emulsion stabilized by octenyl succinic anhydride-modified dextrin for improving storage stability and curcumin encapsulation

In our study, octenyl succinic anhydride (OSA)-modified dextrin was prepared and characterized as a novel emulsifier to improve the stability of emulsion and curcumin encapsulation. Fourier-transform infrared spectroscopy demonstrated the occurrence of esterification between OSA and dextrin (M_w = 1.041 × 10⁴ g/mol). The absolute value of ζ-potential of OSA-dextrin increased (from 25.37 mV to 34.57 mV) with increasing OSA addition (from 0% to 8%), and then kept constant. Confocal laser scanning microscope results showed that the debranching and esterification of starch improved the oil droplets distribution and reduced the droplet size of emulsions. The emulsifying stability of emulsions coated by dextrin was greatly improved with OSA modification. The particle size of emulsion decreased significantly when the addition of OSA increased during storage. OSA-modified dextrin was in a position to increase encapsulation efficiency of curcumin. This research may increase the utilization of emulsions stabilized by OSA dextrin in food industry.