Effects of high pressure homogenization on faba bean protein aggregation in relation to solubility and interfacial properties

Mild extraction of faba bean (Vicia faba L.) proteins against conventional methods: Impact on physicochemical and thermal characteristics

Faba bean (high- and low-tannin) protein isolates were water extracted followed by dialysis or micellization in comparison to concentrates from conventional alkali extraction + acid precipitation, and salt-based extraction (1% NaCl) + dialysis. Protein fractions were characterised for secondary structure conformational changes, crystalline structure, particle size distribution in aqueous suspension and thermal properties. Mild water or salt extraction did not influence particle size distribution. Based on XRD, FTIR and CD, β-sheet structures were the most abundant secondary structures and water extraction + dialysis had minimal impact on their native conformation. DSC results showed an association between protein purity, glass transition temperature and endothermic enthalpy. High melting temperature above glass transition confirms the suitability of faba bean proteins for thermal/extrusion processing. Fractionation method was a more significant determinant of physicochemical characteristics compared to the cultivar. Further exploration of the techno-functional characteristics of faba bean proteins is essential for value-added food applications.

Protein from tiger nut meal extracted by deep eutectic solvent and alkali-soluble acid precipitation: A comparative study on structure, function, and nutrition

Protein from tiger nut meal (TNP) performance high nutritional value. This study optimized the extraction parameters for TNP (DES-TNP) using deep eutectic solvent, with HBD: HBA = 5:1, Liquid: Solid = 11:1, and the moisture content was 15 %. A comprehensive comparison was conducted with the protein extracted using alkali-soluble acid precipitation (ASAE-TNP). DES-TNP demonstrated significantly higher purity (76.21 ± 2.59 %) than ASAE-TNP (67.48 ± 1.11 %). Density functional theory confirmed the successful synthesis of DES and its strong interaction with TNP. Moreover, DES-TNP and ASAE-TNP were different in structure (microscopic, secondary, and tertiary) and molecular weight distribution. The discrepancy contributed to the different functional properties, DES-TNP exhibiting better solubility, emulsification and foaming properties at pH13 compared to ASAE-TNP. For nutritional properties, DES-TNP and ASAE-TNP exhibited similar amino acid composition and digestibility, but the total amino acid content of DES-TNP was higher. This study presented a novel method for the extraction and comprehensive utilization of TNP.

Enhancing the usability of pea protein in emulsion applications through modification by various approaches: A comparative study

The extensive utilization in food industry of pea protein is often impeded by its low water solubility, resulting in poor functional properties. Various methods, including pH-shifting (PS), ultrasonication (US), high-pressure micro-fluidization (MF), pH-shifting combined with ultrasonication (PS-US), and pH-shifting with micro-fluidization (PS-MF), were utilized to modify pea protein isolate (PPI) in order to enhance its functionality in emulsion formulation. The physicochemical properties and structural changes of the protein were investigated by assessing solubility, particle size, surface charge, protein profile, surface hydrophobicity, free sulfhydryl groups, and secondary structure content. The extent of modification induced by each treatment method on PPI-stabilized emulsions was compared based on parameters such as adsorbed interfacial protein concentration, particle size, zeta potential, and microstructure of the prepared emulsions. All modification increased the solubility of pea protein in the sequence of PS (4-fold) < MF (7-fold) < US (11-fold) < PS-US (13-fold) < PS-MF (14-fold). For single treatments, proteins dissolved more readily under US, resulting in the most uniform emulsions with small particle. The combined processes of PS-US and PS-MF further improved solubility, decreased emulsions particle size, promoted uniformity of emulsions. PS-US-stabilized emulsions displayed more smaller droplet size, narrower size distribution, and slightly higher stability than those prepared by PS-MF. The relatively higher emulsifying capacity of PPI treated by PS-US than those by PS-MF may be attributed to its higher surface hydrophobicity.

Solubility, (micro)structure, and in vitro digestion of pea protein dispersions as affected by high pressure homogenization and environmental conditions

In this work, dispersions were prepared with commercial pea protein isolate (PPI) and subjected to different (i) high pressure homogenization (HPH) intensities (0 - 200 MPa) (room temperature, pH 7) or (ii) environmental conditions (60 °C, pH 7 or pH 12) to generate dispersions with distinct protein molecular and microstructural characteristics, impacting protein solubility. Besides, protein digestion was analyzed following the static INFOGEST in vitro digestion protocol. Generally, increasing pressure of the homogenization treatment was linked with decreasing particle sizes and enhanced protein digestion. More specifically, the dispersion that did not undergo HPH (0 MPa) as well as the dispersion treated at 60 °C, pH 7, had highly similar microstructures, consisting of large irregular particles (10 - 500 µm) with shell-like structures, and exhibited low solubility (around 15 % and 28 %, respectively), which resulted in limited proteolysis (35 % and 42 %, respectively). In contrast, the dispersion subjected to HPH at 100 MPa and the dispersion treated at 60 °C, pH 12 also had similar microstructures with small and homogeneous particles (<1 µm), and exhibited relatively good solubility (54 % and 31 %, respectively), which led to enhanced protein digestion levels (87 % and 74 %, respectively). This study highlights the potential of food processing on macronutrient (micro)structure and further gastrointestinal stability and functionality.

Unraveling the effect of combined heat and high-pressure homogenization treatment on the improvement of chickpea protein solubility from the perspectives of colloidal state change and structural characteristic modification

Chickpea protein (CP) is a promising plant protein ingredient, but the poor solubility has limited its broad application. In this study, heating followed by high-pressure homogenization (HPH) was used to improve the solubility of CP. The results showed that combined heat (80℃, 30 min) and HPH (80 MPa, 2 cycles) treatment exhibited an additive effect in improving the solubility of CP. This improvement could be attributed to the dissociation and the rearrangement of large insoluble protein aggregates into small-sized soluble protein aggregates, the increased exposure of hydrophobic residues and reactive sulfhydryl groups, the transformation of α-helices to β-sheets and β-turns. Moreover, the 11S subunits of CP could form reinforced disulfide covalent cross-links under heating + HPH, which may provide steric hindrance preventing the reassembly of large protein bodies. This work proposes an interesting approach to enhance the physicochemical properties of CP for tailoring techno-functional plant protein ingredients in food formulations.

Improving the solubility and interfacial absorption of hempseed protein via a novel high pressure homogenization-assisted pH-shift strategy

A pH shift treatment aided by high pressure homogenization (HPH) with various pressures (0-120 MPa) was employed to structurally modify hempseed protein isolate (HPI). Compared with individual pH shift or HPH treatment, HPH-assisted pH shift improved the structural flexibility of HPI, as revealed by the increased random coil in protein secondary structure. With the incorporation of HPH into pH shift, the intrinsic fluorescence intensity was remarkably attenuated and redshifted, whereas the surface hydrophobicity was pronouncedly boosted, indicating the extensive unfolding of protein structure. Moreover, the cotreated HPI exhibited a smaller and more homogenous particle size, notably at a higher pressure. Consequently, the solubility was drastically raised by the cooperated treatments, to the maximum value (62.8 %) at 120 MPa. These physicochemical changes in the cotreated HPI facilitated a consolidated interfacial activity. Moreover, the cooperated treatment, especially highly pressured (120 MPa), facilitated the penetration and rearrangement of proteins at the oil-water interface.

Modification of the physicochemical, functional, biochemical and structural properties of a soursop seed (Annona muricata L.) protein isolate treated with high-intensity ultrasound

The obtained seeds from fruit processing are considered by-products containing proteins that could be utilized as ingredients in food manufacturing. However, in the specific case of soursop seeds, their usage for the preparation of protein isolates is limited. In this investigation a protein isolate from soursop seeds (SSPI) was obtained by alkaline extraction and isoelectric precipitation methods. The SSPI was sonicated at 200, 400 and 600 W during 15 and 30 min and its effect on the physicochemical, functional, biochemical, and structural properties was evaluated. Ultrasound increased (p < 0.05) up to 5 % protein content, 261 % protein solubility, 60.7 % foaming capacity, 30.2 % foaming stability, 86 % emulsifying activity index, 4.1 % emulsifying stability index, 85.4 % in vitro protein digestibility, 423.4 % albumin content, 83 % total sulfhydryl content, 316 % free sulfhydryl content, 236 % α-helix, 46 % β-sheet, and 43 % β-turn of SSPI, in comparison with the control treatment without ultrasound. Furthermore, ultrasound decreased (p < 0.05) up to 50 % particle size, 37 % molecular flexibility, 68 % surface hydrophobicity, 41 % intrinsic florescence spectrum, and 60 % random coil content. Scanning electron microscopy analysis revealed smooth structures of the SSPI with molecular weights ranging from 12 kDa to 65 kDa. The increase of albumins content in the SSPI by ultrasound was highly correlated (r = 0.962; p < 0.01) with the protein solubility. Improving the physicochemical, functional, biochemical and structural properties of SSPI by ultrasound could contribute to its utilization as ingredient in food industry.

Microfluidization improved hempseed yogurt's physicochemical and storage properties

BACKGROUND

Plant-based yogurts are suffering from the common problems, such as an unattractive color, stratified texture state and rough taste. Therefore, it is urgent to develop a novel processing method to improve the quality and extend the storage life of hempseed yogurt. In the present study, hempseed yogurt was microfluidized prior to fermentation. The effects of microfluidization on microstructure, particle size, mechanical properties, sensory acceptability, variations in pH and titratable acidity, lactic acid bacteria (LAB) counts, and stability of hempseed yogurt during 20 days of storage were investigated.

RESULTS

Microfluidization contributed to the production of hempseed yogurt as a result of the better physicochemical properties compared to normal homogenization. Specifically, microfluidization reduced the particle size of hempseed yogurt with a uniform particle distribution, increased water holding capacity, and improved texture and rheological properties. These advancements resulted in higher sensory scores for the yogurt. Furthermore, during storage, microfluidization effectively inhibited the post-acidification process of hempseed yogurt, and increased LAB counts and storage stability.

CONCLUSION

Microfluidization improved the physicochemical properties and storage stability of hempseed yogurt. Our findings support the application of microfluidization in hempseed yogurt and provide a new approach for enhancing the quality of plant-based alternatives that meet consumers' demands for high-quality food products. © 2023 Society of Chemical Industry.

Lima bean (Phaseolus lunatus Linn.) protein isolate as a promising plant protein mixed with xanthan gum for stabilizing oil-in-water emulsions

BACKGROUND

Lima bean protein isolate (LPI) is an underutilized plant protein. Similar to other plant proteins, it may display poor emulsification properties. In order to improve its emulsifying properties, one effective approach is using protein and polysaccharide mixtures. This work investigated the structural and emulsifying properties of LPI as well as the development of an LPI/xanthan gum (XG)-stabilized oil-in-water emulsion.

RESULTS

The highest protein solubility (84.14%) of LPI was observed and the molecular weights (Mw ) of most LPI subunits were less than 35 kDa. The enhanced emulsifying activity index (15.97 m2  g-1 ) of LPI might be associated with its relatively high protein solubility and more low-Mw subunits (Mw  < 35 kDa). The effects of oil volume fraction (ϕ) on droplet size, microstructure, rheological behavior and stability of emulsions were investigated. As ϕ increased from 0.2 to 0.8, the emulsion was arranged from spherical and dispersed oil droplets to polyhedral packing of oil droplets adjacent to each other, while the LPI/XG mixtures changed from particles (in the uncrowded interfacial layer) to lamellae (in the crowded interfacial layer). When ϕ was 0.6, the emulsion was in a transitional state with the coexistence of particles and lamellar structures on the oil droplet surface. The LPI/XG-stabilized emulsions with ϕ values of 0.6-0.8 showed the highest stability during a 14-day storage period.

CONCLUSION

This study developed a promising plant-based protein resource, LPI, and demonstrates potential application of LPI/XG as an emulsifying stabilizer in foods. © 2023 Society of Chemical Industry.

Effects of high hydrostatic pressure on peelability and quality of crayfish(Procambarus clarkii)

BACKGROUND

Peeling of crayfish is a very important process in production. Crayfish peeling by machine can increase production efficiency and enhance safety in the production process. The tight muscle-shell attachment causes difficulty in peeling freshly caught crayfish. However, few studies have explored the changes in crayfish quality under favorable shell-loosening treatments.

RESULTS

In this study, the shell-loosening properties of crayfish and changes in crayfish quality, microstructure and protein fluorescent features were investigated after high hydrostatic pressure (HHP) treatment. New methods were established to measure the peeling performance of crayfish, which are peelability and meat yield rate (MYR). The normalization of peelability and MYR were verified by different weights of crayfish tails and different treatments. The peeling effect of HHP-treated crayfish was evaluated by a new quantitative measurement method, and MYR was calculated. The results showed that all the HHP treatments reduced crayfish peeling work and increased MYR. The HHP treatment provided better crayfish quality in terms of texture and color and enlarged the shell-loosening gap. Among all HHP treatments, 200 MPa treatment exhibited lower peeling work, higher MYR and an expansion of the shell-loosening gap, reaching up to 573.8 μm. At the same time, 200 MPa treatment could maintain crayfish quality.

CONCLUSION

The findings outlined above suggest that high pressure is a promising method for loosening crayfish shells. 200 MPa is an optimal HHP treatment condition for crayfish peeling, exhibiting a promising application in industrial processing. © 2023 Society of Chemical Industry.

Tailoring the Techno-Functional Properties of Fava Bean Protein Isolates: A Comparative Evaluation of Ultrasonication and Pulsed Electric Field Treatments

The fava bean protein isolate (FBPI) holds promise as a sustainable plant-based protein ingredient. However, native FBPIs exhibit limited functionality, including unsuitable emulsifying activities and a low solubility at a neutral pH, restricting their applications. This study is focused on the effect of ultrasonication (US) and pulsed electric fields (PEF) on modulating the techno-functional properties of FBPIs. Native FBPIs were treated with US at amplitudes of 60-90% for 30 min in 0.5 s on-and-off cycles and with PEF at an electric field intensity of 1.5 kV/cm with 1000-4000 pulses of 20 μs pulse widths. US caused a reduction in the size and charge of the FBPIs more prominently than the PEF. Protein characterization by means of SDS-PAGE illustrated that US and PEF caused severe-to-moderate changes in the molecular weight of the FBPIs. In addition, a spectroscopic analysis using Fourier-transform infrared (FTIR) and circular dichroism (CD) revealed that US and the PEF induced conformational changes through partial unfolding and secondary structure remodeling from an α-helix to a β-sheet. Crystallographic and calorimetric determinations indicated decreased crystallinity and lowered thermal transition temperatures of the US- and PEF-modified FBPIs. Overall, non-thermal processing provided an effective strategy for upgrading FBPIs' functionality, with implications for developing competitive plant-based protein alternatives.

Pea protein extraction method impacts the protein (micro)structural organisation and in vitro digestion kinetics

There is increasing interest in including pulse proteins into food products due to their nutrient-rich and sustainable character. However, little is known regarding the consequences of different extraction approaches on the pulse protein structure and the subsequent protein (micro)structural organization and protein digestion kinetics. Therefore, three green pea protein extracts were created: (i) cooking followed by cotyledon cell isolation, (ii) alkaline extraction followed by isoelectric precipitation, or (iii) salt extraction, and compared to the original pea flour as well as to sodium caseinate. The results showed that encapsulated, denatured protein inside pea cotyledon cells presented the (s)lowest digestion, while accessible and more native protein (e.g., pea flour, pea protein salt extract) presented much faster and higher digestion. Moreover, the alkali extracted pea protein was denatured to some extent, significantly lowering in vitro digestion kinetics. In the second part, three different in vitro approaches were applied to digest the salt extracted pea protein. Semi-dynamic gastric digestion approaches simulate in vivo conditions more closely which especially impacted the rate of digestion.

Enhancing the Techno-Functional Properties of Lentil Protein Isolate Dispersions Using In-Line High-Shear Rotor-Stator Mixing

In response to global challenges such as climate change and food insecurity, plant proteins have gained interest. Among these, lentils have emerged as a promising source of proteins due to their good nutritional profile and sustainability considerations. However, their widespread use in food products has been impeded by limited solubility. This study aimed to investigate the potential of high-shear mixing, a resource-efficient technique, to enhance lentil protein solubility and its functional properties. Red lentil protein isolate powders were rehydrated and subjected to a semi-continuous in-line high-shear treatment at 10,200 rpm for a timespan ranging from 0 to 15 min. The results highlighted a significant (p < 0.05) increase in solubility from 46.87 to 68.42% after 15 min of shearing and a reduction in particle size as a result of the intense shearing and disruption provided by the rotor and forced passage through the perforations of the stator. The volume-weighted mean diameter decreased from 5.13 to 1.72 µm after 15 min of shearing, also highlighted by the confocal micrographs which confirmed the breakdown of larger particles into smaller and more uniform particles. Rheological analysis indicated consistent Newtonian behaviour across all dispersions, with apparent viscosities ranging from 1.69 to 1.78 mPa.s. Surface hydrophobicity increased significantly (p < 0.05), from 830 to 1245, indicating exposure of otherwise buried hydrophobic groups. Furthermore, colloidal stability of the dispersion was improved, with separation rates decreasing from 71.23 to 24.16%·h-1. The significant enhancements in solubility, particle size reduction, and colloidal stability, highlight the potential of in-line high-shear mixing in improving the functional properties of lentil protein isolates for formulating sustainable food products with enhanced techno-functional properties.

Leveraging new opportunities and advances in high-pressure homogenization to design non-dairy foods

High-pressure homogenization (HPH) and ultrahigh-pressure homogenization (UHPH) are emerging food processing techniques for stabilizing emulsions and food components under the pressure range from 60 to 400 MPa. Apart from this, they also support increasing nutritional profile, food preservation, and functionality enhancement. Even though the food undergoes the shortest processing operation, the treatment leads to modification of physical, chemical, and techno-functional properties, in addition to the formation of micro-sized particles. This study focuses on recent advances in using HPH/UHPH on plant-based milk sources such as soybeans, almonds, hazelnuts, and peanuts. Overall, this systematic review provides an in-depth analysis of the principles of HPH/UHPH, the mechanism of action, and their applications in other nondairy areas such as fruits and vegetables, meat, fish, and marine species. This work also deciphers the role of HPH/UHPH in modifying food components, their functional quality enhancement, and their provision of oxidative resistance to many foods. HPH is not only perceived as a technique for size reduction and homogenization; however, it does various functions like microbial inactivation, improvement of rheologies like texture and consistency, decreasing of lipid oxidation, and making positive modifications to proteins such as changes to the secondary structure and tertiary structure thereby enhancing the emulsifying properties, hydrophobicity of proteins, and other associated functional properties in many nondairy sources at pressures of 100-300 MPa. Thus, HPH is an emerging technique with a high throughput and commercialization value in food industries.

Impact of soybean protein isolate concentration on chitosan-cellulose nanofiber edible films: Focus on structure and properties

Chitosan and cellulose nanofiber films are frequently employed as biodegradable materials for food packaging. However, many exhibit suboptimal hydrophobicity and antioxidant properties. To address these shortcomings, we enhanced the performance by adding different concentrations of soybean protein isolate (SPI) to chitosan-cellulose nanofiber (CS-CNF) films. As SPI concentration varied, the turbidity, particle size, and ζ-potential of the film-forming solutions initially decreased and subsequently increased. This suggests that 1 % SPI augments the electrostatic attraction and compatibility. Rheological analysis confirmed a pronounced apparent viscosity at this concentration. Analyses using Fourier transform infrared spectra, Raman spectra, X-ray diffraction, and Scanning electron microscope revealed the presence of hydrogen bonds and electrostatic interactions between SPI and CS-CNF, indicative of superior compatibility. When SPI concentration was set at 1 %, notable enhancements in film attributes were observed: improvements in tensile strength and elongation at break, a reduction in water vapor permeability by 8.23 %, and an elevation in the contact angle by 18.85 %. Furthermore, at this concentration, the ABTS+ and DPPH scavenging capacities of the film surged by 61.53 % and 46.18 %, respectively. Meanwhile, the films we prepare are not toxic. This research offers valuable insights for the advancement and application of protein-polysaccharide-based films.

Structural modification of oat protein by thermosonication combined with high pressure for O/W emulsion and model salad dressing production

Oat protein is becoming an important ingredient in beverages and formulated foods owing to its high nutritive value and bland flavor; yet, its functionality remains largely unexplored. This study sought to enhance the surface activity of oat protein isolate (OPI) through high-intensity ultrasound (HIU; at 20 or 60 °C) combined with high pressure homogenization (HP; 30 MPa) treatments. Sonication disturbed the protein conformation and significantly improved surface hydrophobicity (19.7%) and ζ-potential (15.7%), which were further augmented by subsequent HP (P < 0.05). Confocal microscopy revealed a uniform oil droplet distribution in emulsions prepared with HIU+HP combination treated OPI, and the oil droplet size decreased up to 35.6% when compared to that of non-treated OPI emulsion (d = 1718 nm). Emulsifying activity was greater for HIU+HP than for HIU, and the viscosity followed a similar trend. Moreover, while emulsions prepared with HIU or HP treated OPI were more stable than control, the 60 °C HIU+HP combination treatment yielded the maximum stability. In corroboration, a model salad dressing prepared from HIU+HP treated OPI displayed a homogenous oil droplet distribution and an improved viscosity. Therefore, thermosonication combined with high pressure homogenization may be suitable for salad dressings and other oil-imbedded food products.

Influence of heat treatment before and/or after high-pressure homogenization on the structure and emulsification properties of soybean protein isolate

This study investigates the effects of heat treatment before high-pressure homogenization (HHPH) and heat treatment after high-pressure homogenization (HPHH) at different pressures (20, 60, and 100 MPa) on the structural and emulsification properties of soy protein isolate (SPI). The results indicate that HHPH treatment increases the surface hydrophobicity (H0) of the SPI, reduces β-fold and irregular curls, leading to the formation of soluble aggregates, increased adsorbed protein content, and subsequent improvements in emulsification activity index (EAI) and emulsion stability index (ESI). In contrast, the HPHH treatment promoted the exchange of SH/SS bonds between protein molecules and facilitated the interaction of basic peptides and β-subunits, leading to larger particle sizes of the soluble aggregates compared to the HHPH-treated samples. However, excessive aggregation in HPHH-treated aggregates leads to decreased H0 and adsorbed protein content, and increased interfacial tension, negatively affecting the emulsification properties. Compared to the HPHH treatment, HHPH treatment at homogenization pressures of 20 to 100 MPa increases EAI and ESI by 5.81-29.6 % and 5.31-25.9 %, respectively. These findings provide a fundamental basis for soybean protein manufacturers to employ appropriate processing procedures aimed at improving emulsification properties.

Effects of protein concentration, ionic strength, and heat treatment on the interfacial and emulsifying properties of coconut (Cocos nucifera L.) globulins

This research aimed to investigate the effects of protein concentration (0.2 %-1.0 %), ionic strength (100-500 mM NaCl), and heat treatment (temperature: 80 and 90℃; time: 15 and 30 min) on the interfacial and emulsifying properties of coconut globulins (CG). When protein concentration was set at 0.2-0.6 %, the interfacial adsorption increased with the increasing of protein concentration. However, the lowest interfacial viscoelasticity was found when CG concentration was 0.6 %. When the protein concentration was higher than 0.6 %, the dilatational viscoelasticity increased with the increasing of protein concentration. The protein concentration showed positive effect on the emulsion stability of CG. The ionic strength showed positive effect on the interfacial adsorption but negative effects on the interfacial viscoelasticity and emulsion stability. Higher temperature and longer heating time brought worse interface behavior. The heated CG (90℃, 30 min) had the worst interfacial behavior but the best emulsion stability.

Aggregate Size Modulates the Oil/Water Interfacial Behavior of Myofibrillar Proteins: Toward the Thicker Interface Film and Disulfide Bond

Myofibrillar protein (MP) aggregate models have been established to elucidate the correlation between their aggregate sizes and interfacial properties. The interfacial layer thickness was measured by the polystyrene latex method and quartz crystal microbalance with dissipation measurement. Interfacial conformations were then characterized in situ (front-surface fluorescence spectroscopy) and ex situ (reactive sulfhydryl group and secondary structure measurement following MP displacement). The viscoelasticity of the interfacial film and its resistance to surfactant-induced competitive displacement were reflected by the dilatational rheology and dynamic interfacial tension with the bulk phase exchange. Finally, we compared the findings of competitive displacement before/after adding a sulfhydryl-blocking agent, N-ethylmaleimide, to highlight the role of S-S linkage on interfacial film formation and stability. We substantiated that the aggregate size of the MP governed their interfacial properties. Small-sized aggregates exhibited more ordered secondary structures on the oil-water interface, which was conducive to the adsorption ratio of the protein and the adsorption dynamics. Although larger aggregates lowered the diffusion rate during interfacial film formation, they allowed the thicker and more viscoelastic interfacial film to be constructed afterward through more disulfide bond formation, resulting in greater resistance to surfactant-induced competitive displacement.

Enhancing pea protein isolate functionality: A comparative study of high-pressure homogenization, ultrasonic treatment, and combined processing techniques

Pea protein has attracted widespread attention due to its high nutritional value, low allergenicity, non-GMO status, and broad availability. However, compared to animal proteins, pea protein has inferior functional properties, which limits its application in the food industry. This study used pea protein isolate (PPI) as the main raw material and investigated the effects of high-pressure homogenization (HPH), ultrasonic treatment (US), and the combination of the two in different orders on the structure and function of PPI. The results showed that HPH or US promoted the transformation of PPI insoluble suspension into a uniform protein dispersion, significantly reducing particle size, unfolding the spatial structure, exposing more amino acid residues. These structural changes resulted in a substantial increase in the solubility, foaming capacity and emulsifying activity of PPI. Moreover, the combined treatments further impacted the properties of PPI, largely depending on the order of the processing steps; the combination of HPH-US exhibited the best functional characteristics.

The Emulsifying Properties, In Vitro Digestion Characteristics and Storage Stability of High-Pressure-Homogenization-Modified Dual-Protein-Based Emulsions

The droplet size, zeta potential, interface protein adsorption rate, physical stability and microrheological properties of high-pressure-homogenization (HPH)-modified, dual-protein-based whey-soy (whey protein isolate-soy protein isolate) emulsions containing different oil phase concentrations (5%, 10% and 15%; w/w) were compared in this paper. The in vitro digestion characteristics and storage stability of the dual-protein emulsions before and after HPH treatment were also explored. The results show that with an increase in the oil phase concentration, the droplet size and interface protein adsorption rate of the untreated dual-protein emulsions increased, while the absolute value of the zeta potential decreased. When the oil phase concentration was 10% (w/w), HPH treatment could significantly reduce the droplet size of the dual-protein emulsion, increase the interface protein adsorption rate, and improve the elasticity of the emulsion. Compared with other oil phase concentrations, the physical stability of the dual-protein emulsion containing a 10% (w/w) oil phase concentration was the best, so the in vitro digestion characteristics and storage stability of the emulsions were studied. Compared with the control group, the droplet size of the HPH-modified dual-protein emulsion was significantly reduced after gastrointestinal digestion, and the in vitro digestibility and release of free amino groups both significantly increased. The storage stability results show that the HPH-modified dual-protein emulsion showed good stability under different storage methods, and the storage stability of the steam-sterilized dual-protein emulsion stored at room temperature was the best. These results provide a theoretical basis for the development of new nutritional and healthy dual-protein liquid products.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Effects of microwave on the structural and emulsifying properties and interfacial properties of oxidized soybean protein aggregates

This research explored microwave treatment impact on the structuro-functional aspects of oxidized soy protein aggregates (OSPI). Data showed that oxidative treatment promoted the formation of high molecular weight aggregates through hydrophobic interactions, thereby disrupting the structure of natural soy protein isolates (SPI). Microwave treatment for an appropriate time (≤30 s) caused the molecular structure of OSPI to open up and reduction in molecular weight and disulfide bond content, while absolute zeta potential increased. These modifications increased emulsifying capacity of OSPI, as well as the interfacial adsorption of protein. Longer microwave treatment times (>30 s) caused OSPI to exhibit a tendency to aggregate in TEM and CLSM images. It indicated the appropriate microwave electromagnetic field effect and microwave heating effect could coordinatively regulate soy protein functional properties by modifying their aggregation behavior. The results provided new ideas for reducing resource waste, and further expanding soy protein application in the food industry.

Yellow Field Pea Protein (Pisum sativum L.): Extraction Technologies, Functionalities, and Applications

Yellow field peas (Pisum sativum L.) hold significant value for producers, researchers, and ingredient manufacturers due to their wealthy composition of protein, starch, and micronutrients. The protein quality in peas is influenced by both intrinsic factors like amino acid composition and spatial conformations and extrinsic factors including growth and processing conditions. The existing literature substantiates that the structural modulation and optimization of functional, organoleptic, and nutritional attributes of pea proteins can be obtained through a combination of chemical, physical, and enzymatic approaches, resulting in superior protein ingredients. This review underscores recent methodologies in pea protein extraction aimed at enhancing yield and functionality for diverse food systems and also delineates existing research gaps related to mitigating off-flavor issues in pea proteins. A comprehensive examination of conventional dry and wet methods is provided, in conjunction with environmentally friendly approaches like ultrafiltration and enzyme-assisted techniques. Additionally, the innovative application of hydrodynamic cavitation technology in protein extraction is explored, focusing on its prospective role in flavor amelioration. This overview offers a nuanced understanding of the advancements in pea protein extraction methods, catering to the interests of varied stakeholders in the field.

Effects of processing technologies on the antioxidant properties of common bean (Phaseolus vulgaris L.) and lentil (Lens culinaris) proteins and their hydrolysates

The effects of ultrasound (280 W, 5 min), heat treatment (75 °C and 90 °C for 10 min) and microfluidization (125 MPa, 4 cycles) as pre or post treatments and their combination with enzymatic hydrolysis on the antioxidant properties of common bean and lentil protein hydrolysates were investigated. In general, hydrolysis resulted in increases of antioxidant activity, both in the presence and absence of processing technologies. The increases reached maximum values of 158% (ABTS), 105% (DPPH), 279% (FRAP) and 107% (TAC) for the bean protein hydrolysates submitted to post-treatment with ultrasound (ABTS, FRAP and TAC) and pre-treatment with microfluidization (DPPH), compared to their respective controls (untreated samples). For lentil proteins, the increases reached 197% (ABTS), 170% (DPPH), 690% (FRAP) and 213% (TAC) for samples submitted to ultrasound post-treatment (ABTS), microfluidization pre-treatment (DPPH) and post-treatment (FRAP), and 75 °C pre-treatment (TAC) compared to their respective controls. Surface hydrophobicity and molecular weight profile by SEC-HPLC analysis indicated modifications in the structures of proteins in function of the different processing technologies. For both proteins, electrophoresis indicated a similar profile for all hydrolysates, regardless of the process applied as pre or post treatment. Solubility of bean and lentil protein concentrates was also improved. These results indicated that different processing technologies can be successfully used in association with enzymatic hydrolysis to improve the antioxidant properties of lentil and bean proteins.

Modifications to structural, techno-functional and rheological properties of sesame protein isolate by high pressure homogenization

In this study, we aimed to determine the effect of high pressure homogenization (HPH) at a pressure up to 150 MPa on microstructural, techno-functional and rheological properties of sesame protein isolate (SPI). HPH treatment caused a partial change in the secondary structure of SPI, however, the changes in surface hydrophobicity and free -SH groups, indicating HPH had significant effect on the tertiary structure. After the HPH treatment, the particles dispersed homogeneously with more rougher surface. Sesame proteins had the smallest particle size (0.79 μm) and highest zeta potential (38.83 mV) at 100 MPa pressure. The most developed water/oil holding capacity, emulsification and foaming properties were achieved at 100 MPa pressure. However, the maximum stable foam formation (83.33 %) was determined at 150 MPa pressure. When the shear rate is fixed as 50 1/s, an increase in the viscosity value of the samples treated with 100 and 150 MPa pressure was detected compared to the control sample, while the lowest viscosity was determined the ones treated at 50 MPa. In all samples except 50 MPa pressure-treated proteins, viscoelastic character became dominant with increasing frequency (G' > G″). Modification with HPH resulted in a decrease of about 15 °C in the gelation temperature of SPI.

Performance of rice protein hydrolysates as a stabilizing agent on oil-in-water emulsions

Rice protein isolate (RPI) has been receiving increasing attention from the food industry due to its performance as an emulsifier. However, it is possible to enlarge its field of applications through enzymatic hydrolysis. Therefore, this work aimed to investigate the effects of the controlled enzymatic hydrolysis (degree of hydrolysis DH as 2, 6, and 10%) using Flavourzyme on the physicochemical properties of rice protein and to identify the minimum concentration of these hydrolysates (0.5, 1.0, and 1.5%) to form and stabilize oil/water emulsion. The physicochemical, interfacial tension (IT), and surface characteristics of RPI and their hydrolysates (RPH) were determined. Even at a lower protein concentration (1.0%), protein hydrolysate presented lower IT when compared with RPI at a higher protein concentration (1.5%). The interfacial tension decreased from 17.6 mN/m to 9.9 mN/m when RPI was hydrolyzed. Moreover, enzymatic hydrolysis (DH 6 and 10%) enhanced the protein solubility by almost 20% over a pH range of 3-11. The improved amphiphilic property of RPH, supported by the results of IT and solubility, was confirmed by the higher emulsion stability indicated by the Turbiscan and emulsion stability indexes. Emulsions stabilized by RPH (DH 6% and 10%) at lower protein concentrations (1%) exhibited better physical stability than RPI at higher protein concentrations (1.5%). In this work, we verified the minimum concentration of rice protein hydrolysate required to form and stabilize oil-in-water (O/W) emulsions.

The Effect of High Pressure Homogenization on the Structure of Dual-Protein and Its Emulsion Functional Properties

It has been proven that high-pressure homogenization (HPH) could improve the functional properties of proteins by modifying their structure. This study researched the effect of HPH on the structural and functional properties of whey-soy dual-protein (Soy Protein Isolation-Whey Protein Isolation, SPI-WPI). Different protein solution samples were treated with HPH at 30, 60, 90, 120 and 150 MPa, and the structure changed under different pressures was analyzed by measuring particle size, zeta potential, Fourier infrared spectrum (FTIR), fluorescence spectrum and scanning electron microscope (SEM). The results showed that HPH significantly reduced the particle size of SPI-WPI, changed the secondary and tertiary structures and improved the hydrophobic interaction between molecules. In addition, HPH significantly improved the solubility and emulsification of all proteins, and the improvement effect on SPI-WPI was significantly better than SPI and WPI. It was found that SPI-WPI treated with 60 MPa had the best physicochemical properties. Secondly, we researched the effect of HPH by 60 MPa on the emulsion properties of SPI-WPI. In this study, the SPI-WPI had the lowest surface tension compared to a single protein after HPH treatment. The emulsion droplet size was obviously decreased, and the elastic properties and physical stability of SPI-WPI emulsion were significantly enhanced. In conclusion, this study will provide a theoretical basis for the application of HPH in modifying the structure of dual-protein to improve its development and utilization in liquid specialty food.

Effects of high-pressure homogenization on the physicochemical, foaming, and emulsifying properties of chickpea protein

In order to expand the utilization of chickpeas in various food products, this study investigated the effects of different homogenization pressures (0-150 MPa) and cycles (1-3) on the physicochemical, and functional properties of chickpea protein. After high-pressure homogenization (HPH) treatment, hydrophobic groups and sulfhydryl groups of chickpea protein was exposed which increased its surface hydrophobicity and decreased its total sulfhydryl content. SDS-PAGE analysis showed that the molecular weight of modified chickpea protein remained unchanged. The particle size and turbidity of chickpea protein significantly decreased with an increase in homogenization pressure and cycles. Furthermore, the solubility, foaming, and emulsifying properties of chickpea protein were all enhanced by HPH treatment. In addition, the emulsions prepared by modified chickpea protein showed better stability capacity due to its smaller particle size and higher zeta potential. Therefore, HPH might be an effective technique to improve the functional properties of chickpea protein.

Functional and structural properties of gliadin as influenced by pH, extraction protocols, and wheat cultivars

Gliadin, owing to its low cost, ease to extract, high foaming capacity, easily available and high surface hydrophobicity, has found a wide range of applications both in the food and pharmaceutical sectors. The functional and structural characteristics of gliadin extracted with four extraction protocols from six wheat cultivars were investigated in this study. The surface-active properties of gliadin protein as a function of pH, extraction protocols, and wheat cultivars were compared, including solubility, zeta-potential, foaming properties, emulsion properties, surface hydrophobicity and secondary structure. Overall gliadin extracted using different extraction protocols and from different wheat cultivars was found to be higher in β-turns (24.88-37.91 %), followed by β-sheet (12.81-22.37 %), α-helix (15.13-20.70 %) and lower in random coil (6.53-9.08 %). Varied pH ranges, wheat cultivars, and different extraction protocols were found to have a substantial impact on solubility, zeta potential, foaming stability, emulsion capacity and surface hydrophobicity. The foaming capacity was observed to be more influenced by extraction protocols than wheat cultivars. Emulsion stability showed statistically significant (p ≤ 0.05) influence between the wheat cultivars, and a non-significant (p ≥ 0.05) difference among extraction protocols. The functional properties of freeze-dried gliadin extracted using different protocols were found to be pH-dependent. A comprehensive understanding of how the structural, surface active and functional properties of gliadin are influenced by the extraction protocols and wheat cultivars will enable us to understand the gliadin better and broaden its use for both food and non-food applications.

Mechanisms underlying the effects of ultrasound-assisted alkaline extraction on the structural properties and in vitro digestibility of Tenebrio molitor larvae protein

Edible insects have been considered as a sustainable and novel protein source to replace animal-derived proteins. The present study aimed to extract Tenebrio molitor larvae proteins (TMP) using ultrasound-assisted alkaline extraction (UAE). Effects of different UAE times (10, 20, 30, 40, and 50 min) on the structural properties and in vitro digestibility of TMP were comparatively investigated with the traditional alkaline extraction method. The results revealed that ultrasonication could effectively alter the secondary/tertiary structures and thermal stability of TMP during UAE. The molecular unfolding and subsequent aggregation of TMP during UAE were mainly attributed to the formation of disulfide bonds and hydrophobic interactions. Moreover, TMP extracted by UAE had higher in vitro digestibility and digestion kinetics than those extracted without ultrasound, and the intermediate UAE time (30 min) was the optimal ultrasound parameter. However, longer UAE times (40 and 50 min) lowered the digestibility of TMP due to severe protein aggregation. The present work provides a potential strategy for the extraction of TMP with higher nutritional values.

High pressure homogenization to boost the technological functionality of native pea proteins

Pea proteins are being increasingly used for the formulation of plant-based products, but their globular structure and the presence of aggregates can affect their technological properties. In this study, the effect of high pressure homogenization (HPH) at different intensities (60 and 100 MPa) was investigated as a pre-treatment to modulate the techno-functional properties of a pea protein isolate (IP) extracted through an alkaline extraction/isoelectric precipitation process. SDS-PAGE, circular dichroism, thermal properties, total free sulfhydryl groups, antioxidant capacity and reducing properties were evaluated along with technological indices as solubility, WHC and OHC, interfacial tension and emulsifying capacity. HPH treatments were able to unfold and modify proteins structure, leading also to a change of the relative abundance of pea protein globulins (SDS-PAGE) and of the vicilin to legumin ratio. Solubility, WHC and OHC were improved, while interfacial tension and emulsifying capacity were weakly affected. However, an enhanced physical stability over time of the emulsions prepared with the 60 MPa-treated protein was found, likely as an effect of the decreased ratio between vicilin and legumin after treatment. Results of this study will contribute to deepen the effect of the HPH technology used as pre-treatment, adding useful results and expanding knowledge about the structure and techno-functional properties of native and modified pea proteins.

Impact of Cavitation Jet on the Structural, Emulsifying Features and Interfacial Features of Soluble Soybean Protein Oxidized Aggregates

A cavitation jet can enhance food proteins' functionalities by regulating solvable oxidized soybean protein accumulates (SOSPI). We investigated the impacts of cavitation jet treatment on the emulsifying, structural and interfacial features of soluble soybean protein oxidation accumulate. Findings have shown that radicals in an oxidative environment not only induce proteins to form insoluble oxidative aggregates with a large particle size and high molecular weight, but also attack the protein side chains to form soluble small molecular weight protein aggregates. Emulsion prepared by SOSPI shows worse interface properties than OSPI. A cavitation jet at a short treating time (<6 min) has been shown to break the core aggregation skeleton of soybean protein insoluble aggregates, and insoluble aggregates into soluble aggregates resulting in an increase of emulsion activity (EAI) and constancy (ESI), and a decrease of interfacial tension from 25.15 to 20.19 mN/m. However, a cavitation jet at a long treating time (>6 min) would cause soluble oxidized aggregates to reaggregate through an anti-parallel intermolecular β-sheet, which resulted in lower EAI and ESI, and a higher interfacial tension (22.44 mN/m). The results showed that suitable cavitation jet treatment could adjust the structural and functional features of SOSPI by targeted regulated transformation between the soluble and insoluble components.

Properties of Protein Isolates from Marine Hydrobionts Obtained by Isoelectric Solubilisation/Precipitation: Influence of Temperature and Processing Time

Protein isolates were obtained from marine hydrobionts by the method of isoelectric precipitation with a preliminary stage of protein alkaline solubilisation. Northern blue whiting was chosen as the raw material. Various technological modes of the solubilisation stage were used: the temperature of the reaction mixture was 4 or 20 °C, and the duration was 4 or 16 h. The yield of the product was 44-45% with a high content of the main component (protein) equal to about 95%. It has been shown that a decrease in the temperature and duration of the alkaline solubilisation stage provides the production of protein isolates with good technological properties, a low solubility, high swelling and high emulsifying ability, necessary for its use in the production of functional food products, including therapeutic and prophylactic effects. These technological properties are explained by a change in the composition and structure of the protein, the change being an increase in the content of essential amino acids and the proportion of α-helices in the polypeptide chain. The main patterns obtained will be used to obtain protein isolates from marine molluscs.

Thoroughly review the recent progresses in improving O/W interfacial properties of proteins through various strategies

Along with the future food market developing world widely, the personalized nutrition and rational function food design are found to be urgently attracted. Oil in a water (O/W) emulsion system has an excellent ability to maintain nutraceuticals and thus plays a promising role in producing future functional foods. Understanding the interfacial related mechanisms involved are essential for improving the quality of food products. Protein can effectively reduce interfacial tension and stable immiscible phases. The interfacial properties of proteins directly affect the emulsion qualities, which have gradually become a prospective topic. This review will first briefly discuss the interfacial-related fundamental factors of proteins. Next, the paper thoroughly overviewed current physical and chemical strategies tailored to improving the interfacial and emulsion properties of proteins. To be summarized, a higher flexibility could allow protein to be more easily unfolded and adsorbed onto the interface but could also possibly form a softer interfacial film. Several physical strategies, such as thermal, ultrasound and especially high-pressure homogenization are well applied to improve the interfacial properties. The interfacial behavior is also altered by various green chemical strategies, such as pH adjustment, covalent modification, and low molecular weight (LMW) surfactant addition. These strategies upgraded emulsion properties by increasing adsorption load, accelerating diffusion and adsorption rate, associated with lowering interfacial tension, and promoting interfacial protein interactions. Future researches targeted at elucidating interfacial-bulk protein interactions, unraveling interfacial behavior through in silico tools, exploring connection between interfacial-industrial processing properties, and clarifying the interfacial-sensory-digestive relationships of O/W emulsions is needed to develop emulsion applications.

Dynamic high pressure treatments: current advances on mechanistic-cum-transport phenomena approaches and plant protein functionalization

Dynamic high pressure treatment (DHPT) either by high pressure homogenization or microfluidisation, is an emerging concept used in the food industry for new products development through macromolecules modifications in addition to simple mixing and emulsification action. Mechanistic understanding of droplets breakup during high pressure homogenization is used to understand how these compact and high molecular weight-sized globular plant proteins are affected during DHPTs. Plant protein needs to be functionalized for advanced use in food formulation. DHPTs brought changes in plant proteins' secondary, tertiary, and quaternary structures through alterations in intermolecular and intramolecular interactions, sulfhydryl groups, and disulfide bonds. These structural changes in plant proteins affected their functional and physicochemical properties like solubility, oil and water holding capacity, gelation, emulsification, foaming, and rheological properties. These remarkable changes made utilization of this concept in novel food system applications like in plant-based dairy analogues. Overall, this review provides a comprehensive and critical understanding of DHPTs on their mechanistic and transport approaches for droplet breakup, structural and functional modification of plant macromolecules. This article also explores the potential of DHPT for formulating plant-based dairy analogues to meet healthy and sustainable food consumption needs. HIGHLIGHTSIt critically reviews high pressure homogenization (HPH) and microfluidisation (DHPM).It explores the mechanistic and transport phenomena approaches of HPH and DHPMHPH and DHPM can induce conformational and structural changes in plant proteins.Improvement in the functional properties of HPH and DHPM treated plant proteins.HPH and DHPM are potentially applicable for plant based dairy alternatives food system.